Guys,
I'm a newbie to rooting and unlocking world, and I think have done too many things to screw my phone as much as I can.
Device is a PrimeOU based. (India)
Trying to recall the series of accidents that I committed since last 24hrs on my HTC ONE V.
1. Unlocked the bootloader successfully.
2. Rooted the device successfully and installed CWM and copied the file mentioned in this post
3. Entered the recovery mode, backed up my previous ROM from CWM.
4. Flashed the ROM directly (Later I came to know there were a some other steps missed here).
5. And of course, post flashing CYANOGENMOD 10 was stuck in the boot screen.
6. Went back to recovery mode and here I made a biggest mistake, I partitioned the SD card as the CWM logs were showing that one of the ext partition could not be mounted. Because of this, I LOST ALL MY BACKUP DATA.
7. Again, referred one more post from here .. tried copying files, played around but nothing worked.
8. Flashed again from some windows based tool (Can recall its name, its not in my browser history as well). Installed TWAR.
9. Started searching for the stock ROM and found one here
Tried to recover the base ROM but no luck.
10. Found that I should try with RUU to resume my stock ROM. relocked phone flashed the image again.
I see error 155, which says that I should try with another RUU version, but the verdict is that hboot version is older.... came through another post that at this moment there is no RUU version available that suits the hboot compatibility as of now.
Conclusion:
I have now understood, that should not have messed up so much with my phone without any proper education on android rooting unlocking.
Device is now flashed with some version of RUU and recovery mode takes me to default android recovery screen which again reboots the phone.
Is my device bricked? Can we get it back functioning normally? Can we try the below?
1. Is there any way I can recover the deleted backup on my SD card and try recover again? Does the card get formatted completely if a new partition is created.?
2. Should I take it to an authorized service center? Its no longer in warranty, so they will always be happy to get things done for a price.
3. Should I take it to an unauthorized shops who can get back my phone working?
Any help is highly appreciated.Please let me know if you have any other advice too...
Thanks in advance,
Sumanth
R: [Q] Attempt to mod my phone now almost bricked
Don't worry you aren't bricked! Right now is your bootloader unlocked?
mr_nooby said:
Don't worry you aren't bricked! Right now is your bootloader unlocked?
Click to expand...
Click to collapse
Ah well, I had to relock it inorder to get through the RUU flash update.
R: [Q] Attempt to mod my phone now almost bricked
If you can't use a ruu, then you need a custom rom. In order to do that you need to unlock and root again first
mr_nooby said:
If you can't use a ruu, then you need a custom rom. In order to do that you need to unlock and root again first
Click to expand...
Click to collapse
Thanks, first of all, happy to hear that phone is still alive.
I just do not want to mess up any further, unless I get a clear step by step process to root it again.
where can I get such descriptive steps that start from ABC....?
R: [Q] Attempt to mod my phone now almost bricked
http://forum.xda-developers.com/showthread.php?t=1598964 this is a very well done guide, step by step
mr_nooby said:
http://forum.xda-developers.com/showthread.php?t=1598964 this is a very well done guide, step by step
Click to expand...
Click to collapse
Hello Nooby - Thanks a lot for your direction. I will try this and reply by tomorrow (Its 4AM here )
I may sound stupid but one last question - if something goes wrong with this one too, hope the phone wont be bricked?
R: [Q] Attempt to mod my phone now almost bricked
Don't worry you won't brick it
mr_nooby said:
Don't worry you won't brick it
Click to expand...
Click to collapse
Hi Nooby - Successfully unlocked and rooted per the steps in the thread. Now my phone boots up and stops in the CYANOGEMOD boot page, which I had tried to install at the first instance. (Similar case just before loosing my backup)
I shall continue with this stock ROM for ONE V mentioned in the post.
http://forum.xda-developers.com/showthread.php?t=1647052
Observations:
1. I see that CWM or TWRP is one of the requirements for this to work, but I have lost either of these after flashing multiple times...
2. Instructions also say that I should use "Sense kernel Titanium-KISS or Stock kernel".
3. There was an earlier failed attempt to install a CYANOGENMOD 10 but not sure if I'm using a Stock Kernel.
Please advice.
Regards,
Sumanth
R: [Q] Attempt to mod my phone now almost bricked
Ok this is twrp recovery http://forum.xda-developers.com/showthread.php?t=1721749 download it and put it in fastboot folder, then connect the phone in fastboot mode, open cmd, locate your fastboot folder and type fastboot flash recovery nameofrecovery.img, then all you need to do is flash the right kernel and your phone will work normally
---------- Post added at 02:11 PM ---------- Previous post was at 02:06 PM ----------
If now you have cm10, download this kernel http://forum.xda-developers.com/showthread.php?t=1954967 and put it in your fastboot folder, connect your phone in fastboot mode, locate the folder in cmd and type fastboot flash boot nameofkernel.img, when you type that you should see on your phone a loading bar on top right of the screen. When this is done, just reboot your phone and wait some minutes for the rom to boot
---------- Post added at 02:31 PM ---------- Previous post was at 02:11 PM ----------
ok so, now iim on the computer i can write properly u.u now that you have unlocked and rooted again, the first thing you do is flash the twrp recovery via fastboot (i guess you know how to do it if you already unlocked and rooted). once the recovery is installed you can go 2 ways:
1) Use sense rom, http://forum.xda-developers.com/showthread.php?t=1647052 this one is very good, almost like stock rom. In order to do that you follow these steps:
a) download TITANIUM KISS kernel from here http://forum.xda-developers.com/showthread.php?t=1765687
b) put the kernel in fastboot folder and flash it, you need to open cmd, locate your fastboot folder, connect the phone in fastboot mode and type fastboot flash boot nameofkernel.img, on the screen you will see the loading bar (it's very quick), once its done, reboot into recovery.
c)from the recovery, go to advanced->mount usb storage, the computer will open your phone folder, just take the rom and copy it to your sd card, when it's done copying, just do unmount usb storage.
d)from the recovery, do wipe->factory reset, it will delete the old rom on your phone
e)now you are ready to flash the rom, from the recovery goto install and select the rom from the list.
It will take like 5-6 minutes to boot the first time, so dont worry and wait.
2) Use cyanogenmod10, then you need hellboy kernel and the rom of course. steps:
a)download hellboy kernel http://forum.xda-developers.com/showthread.php?t=1954967
b)same as above
c)same as above
d)same as above
e)same as above
this will also take some minutes to boot the first time. Once its booted you wont have play store and stuff (only on cyanogen, sense has it already), so you need to do this:
f)mount usb storage
g)download gapps from here http://www.mediafire.com/?k2cb1trw8s2oio2
h)copy gapps to your sd card
i)reboot into recovery and install them, reboot the phone and you are all done!
mr_nooby said:
Ok this is twrp recovery http://forum.xda-developers.com/showthread.php?t=1721749 download it and put it in fastboot folder, then connect the phone in fastboot mode, open cmd, locate your fastboot folder and type fastboot flash recovery nameofrecovery.img, then all you need to do is flash the right kernel and your phone will work normally
---------- Post added at 02:11 PM ---------- Previous post was at 02:06 PM ----------
If now you have cm10, download this kernel http://forum.xda-developers.com/showthread.php?t=1954967 and put it in your fastboot folder, connect your phone in fastboot mode, locate the folder in cmd and type fastboot flash boot nameofkernel.img, when you type that you should see on your phone a loading bar on top right of the screen. When this is done, just reboot your phone and wait some minutes for the rom to boot
---------- Post added at 02:31 PM ---------- Previous post was at 02:11 PM ----------
ok so, now iim on the computer i can write properly u.u now that you have unlocked and rooted again, the first thing you do is flash the twrp recovery via fastboot (i guess you know how to do it if you already unlocked and rooted). once the recovery is installed you can go 2 ways:
1) Use sense rom, http://forum.xda-developers.com/showthread.php?t=1647052 this one is very good, almost like stock rom. In order to do that you follow these steps:
a) download TITANIUM KISS kernel from here http://forum.xda-developers.com/showthread.php?t=1765687
b) put the kernel in fastboot folder and flash it, you need to open cmd, locate your fastboot folder, connect the phone in fastboot mode and type fastboot flash boot nameofkernel.img, on the screen you will see the loading bar (it's very quick), once its done, reboot into recovery.
c)from the recovery, go to advanced->mount usb storage, the computer will open your phone folder, just take the rom and copy it to your sd card, when it's done copying, just do unmount usb storage.
d)from the recovery, do wipe->factory reset, it will delete the old rom on your phone
e)now you are ready to flash the rom, from the recovery goto install and select the rom from the list.
It will take like 5-6 minutes to boot the first time, so dont worry and wait.
2) Use cyanogenmod10, then you need hellboy kernel and the rom of course. steps:
a)download hellboy kernel http://forum.xda-developers.com/showthread.php?t=1954967
b)same as above
c)same as above
d)same as above
e)same as above
this will also take some minutes to boot the first time. Once its booted you wont have play store and stuff (only on cyanogen, sense has it already), so you need to do this:
f)mount usb storage
g)download gapps from here http://www.mediafire.com/?k2cb1trw8s2oio2
h)copy gapps to your sd card
i)reboot into recovery and install them, reboot the phone and you are all done!
Click to expand...
Click to collapse
Okay,, Im all set to start, Let me go back to working Sense ROM and back it up, before I start playing with CM10 any more.
Will keep you posted....
sumanthkulkarni13 said:
Okay,, Im all set to start, Let me go back to working Sense ROM and back it up, before I start playing with CM10 any more.
Will keep you posted....
Click to expand...
Click to collapse
Hi Nooby - So I dont need to flash with TWRP anymore?
Flashing with Sense kernel Titanium-KISS will suffice before I install the myONEv RC9.0 FX+ ROM?
Please advice...
R: [Q] Attempt to mod my phone now almost bricked
sumanthkulkarni13 said:
Okay,, Im all set to start, Let me go back to working Sense ROM and back it up, before I start playing with CM10 any more.
Will keep you posted....
Click to expand...
Click to collapse
Take your time
mr_nooby said:
Take your time
Click to expand...
Click to collapse
Hi Nooby - So I dont need to flash with TWRP anymore?
Flashing with Sense kernel Titanium-KISS will suffice before I install the myONEv RC9.0 FX+ ROM?
Please advice...
R: [Q] Attempt to mod my phone now almost bricked
sumanthkulkarni13 said:
Hi Nooby - So I dont need to flash with TWRP anymore?
Flashing with Sense kernel Titanium-KISS will suffice before I install the myONEv RC9.0 FX+ ROM?
Please advice...
Click to expand...
Click to collapse
You need to flash twrp first then titanium kiss then factory reset and rom at last
mr_nooby said:
You need to flash twrp first then titanium kiss then factory reset and rom at last
Click to expand...
Click to collapse
Ok, noted...
:thanksforyourpatience:
sumanthkulkarni13 said:
Ok, noted...
:thanksforyourpatience:
Click to expand...
Click to collapse
Nooby - TWRP flash Completed I'm now through TWRP successfully.
I open the link to titanium kiss download, shows me a load of file. understand that OC-UV are a kind of presets, excluding them, which one to download? Probably the recent one?
Download Link: http://www.mediafire.com/?e1chs7tzcsstc
sumanthkulkarni13 said:
Nooby - TWRP flash Completed I'm now through TWRP successfully.
I open the link to titanium kiss download, shows me a load of file. understand that OC-UV are a kind of presets, excluding them, which one to download? Probably the recent one?
Download Link: http://www.mediafire.com/?e1chs7tzcsstc
Click to expand...
Click to collapse
this one http://www.mediafire.com/?362drdxcdpkf2s0 , its the latest
mr_nooby said:
this one http://www.mediafire.com/?362drdxcdpkf2s0 , its the latest
Click to expand...
Click to collapse
Update: The ROM upgrade failed. Copied the 393 mb file into the storage sd and tried install post flashing the kernel.
See an error in the recovery that the installation zip could not be opened. I too see an error while opening from my winrar in PC.
Suspect corrupt donwload file. Started new download , 403 MB ... Update to follow...
sumanthkulkarni13 said:
Update: The ROM upgrade failed. Copied the 393 mb file into the storage sd and tried install post flashing the kernel.
See an error in the recovery that the installation zip could not be opened. I too see an error while opening from my winrar in PC.
Suspect corrupt donwload file. Started new download , 403 MB ... Update to follow...
Click to expand...
Click to collapse
yes it's corrupted, my rc9 rom is 403mb too, you need to download again. Before flashing the rom remember to factory reset, it's always better
Related
Hello guys, I have HTC One V GSM which was recently unlocked and rooted by me. I don't remember how I got that but got it Rooted somehow.
Now Problem is I am unable to backup recovery, unable to install Rom, unable to install themes, after every reboot of following actions,
In Rom Manager
Reboot into recovery takes me to red question mark
The Rom you are using doesn't support OTA updates. The developer of this Rom needs to make the appropriate changes so their ROM support OTA update. Please contact ROM developer.
Installation Rom from sd card also shows red question mark.
In ROM Toolbox pro
Rom management
when i install MIUI (one of the ROMs available seen there) after reboot into recovery option same "red question mark"
unable to change font once I got them changed fortunately/unfortunately
so basically I don't know what to do. I don't even know what exactly can i do after Root else then deleting few pre installed apps
I am very very, in fact very, new to all these tech things just checked internet and did few things.
Please help me guys
1) don't use rom manager
2) it seems you don't have a recovery. Flash it again via fastboot
Thanks Mr Nooby for your reply
Since I am very new to these, did u mean the same procedure I did after unlocking bootloader? procedure of rooting?
Is there anyway I can stat over with new Root I mean fresh after Unlocked bootloader? Then may be I can re start installing Roms and tweaking phone?
Yeah you can flash roms and stuff. Remember that fastboot folder you used to root the phone? Put the recovery file (go for twrp recovery, you can find it in original development of this phone) in that folder, connect the phone in fastboot mode, open cmd and type "fastboot flash recovery nameofrecovery.img", it will send recovery to the phone. From there you can install roms. Never use rom manager, it bricks your phone. And whenever you flash a rom, remember to flash kernel or it will be in boot loop
Amit5818 said:
Hello guys, I have HTC One V GSM which was recently unlocked and rooted by me. I don't remember how I got that but got it Rooted somehow.
Now Problem is I am unable to backup recovery, unable to install Rom, unable to install themes, after every reboot of following actions,
In Rom Manager
Reboot into recovery takes me to red question mark
The Rom you are using doesn't support OTA updates. The developer of this Rom needs to make the appropriate changes so their ROM support OTA update. Please contact ROM developer.
Installation Rom from sd card also shows red question mark.
In ROM Toolbox pro
Rom management
when i install MIUI (one of the ROMs available seen there) after reboot into recovery option same "red question mark"
unable to change font once I got them changed fortunately/unfortunately
so basically I don't know what to do. I don't even know what exactly can i do after Root else then deleting few pre installed apps
I am very very, in fact very, new to all these tech things just checked internet and did few things.
Please help me guys
Click to expand...
Click to collapse
Also pls post questions like this in Q&A thread...
E:/%20cant%20/open%20cache/recovery/command
this error comes when i recover after flashing fastboot..
have tried twrp too
it aslso says
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
I don't really understand what could give you the problem. Tell the exact steps you are doing
steps are.. I have downloaded fastboot zip it has adb, adbwinapi.dll, adbwinusbapi.dll, fastboot
i have downloaded twrp.mg (openrecovery-twrp-2.5.0.0-primou)
Opened cmd from same folder typed fastboot openrecovery-twrp-2.5.0.0-primou or openrecovery-twrp-2.5.0.0-primou.img
then pressed recovery
phone restarted green circle thing and then Red triangle with exclam sign. then rebooted by own and nothing happened.
I might be wrong doing it but unable to do anyting.
Can I unroot and start again?
I am downloading HTC asia RUU
Downloading:
RUU_Buzz_Froyo_hTC_Asia_WWE_2.24.707.1_Radio_13.55.55.24H_3.35.20.10_release_161
113_signed.exe
See, you are taking wrong steps. In order to put recovery on phone you must type "fastboot flash recovery nameofrecovery.img", not all the stuff you are writing dude
Amit5818 said:
steps are.. I have downloaded fastboot zip it has adb, adbwinapi.dll, adbwinusbapi.dll, fastboot
i have downloaded twrp.mg (openrecovery-twrp-2.5.0.0-primou)
Opened cmd from same folder typed fastboot openrecovery-twrp-2.5.0.0-primou or openrecovery-twrp-2.5.0.0-primou.img
then pressed recovery
phone restarted green circle thing and then Red triangle with exclam sign. then rebooted by own and nothing happened.
I might be wrong doing it but unable to do anyting.
Can I unroot and start again?
I am downloading HTC asia RUU
Downloading:
RUU_Buzz_Froyo_hTC_Asia_WWE_2.24.707.1_Radio_13.55.55.24H_3.35.20.10_release_161
113_signed.exe
Click to expand...
Click to collapse
Froyo?!?!! what the hell!
lol xD
You are probably using all the stuff for another phone, recovery included..
mr_nooby said:
You are probably using all the stuff for another phone, recovery included..
Click to expand...
Click to collapse
lol imagine Froyo! xD :laugh::laugh::laugh:
Done now I have install
wipe
backup
resore
mount
settings
advanced
and reboot
now what
btw thanks that helped
Imagine aaaaall the peopleeee
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
Are you able to access recovery from the phone?
Seraz I am only soing or typing what finding on google
yea dont know anything
just followed what you all said
btw Mr Nooby thanks.. I think I am learning it quickly
Well, if you can now access recovery from the phone, have fun flashing roms :thumbup:
Amit5818 said:
Seraz I am only soing or typing what finding on google
yea dont know anything
just followed what you all said
btw Mr Nooby thanks.. I think I am learning it quickly
Click to expand...
Click to collapse
No problem man! Cheers!
Hepp Yeah!!
Thanks Mr Nooby
and thanks Seraz 4 making fun
have a nice day
Thanks
8
SOLVED
So today I decided I would try to install a custom OS/ROM whatever it's called on my HTC One X. I unlocked the bootloader successfully without any problems. Then I went on to root the phone, and this is where it all went wrong. I found a tutorial and followed it to the tiniest detail. I am unable to link to it because I am a new user. When my phone rebooted it went to the "HTC Quietly Brilliant" boot screen. I left it there for 30 minutes and it still didn't move on. What do I do now? I am a super noob at this, and I admit that I am an idiot for not reading more up on it first, it just all seems so super complicated.
Thanks in advance for any help and guidance.
well, pm me the link so i can check the instructions you followed and maybe help you
lukes91 said:
well, pm me the link so i can check the instructions you followed and maybe help you
Click to expand...
Click to collapse
I sent you the link. Thanks for your help.
http://rootmyandroid.org/root-htc-one-x-windows-linux-mac-osx.html
Here is the link, so everybody can help you.
Sent from Somewhere Over The Rainbow...
---------- Post added at 08:17 PM ---------- Previous post was at 07:28 PM ----------
so it hanged just after you run the script to root device, right? after you ran the script in the shell, did it return any error?
lukes91 said:
http://rootmyandroid.org/root-htc-one-x-windows-linux-mac-osx.html
Here is the link, so everybody can help you.
Sent from Somewhere Over The Rainbow...
---------- Post added at 08:17 PM ---------- Previous post was at 07:28 PM ----------
so it hanged just after you run the script to root device, right? after you ran the script in the shell, did it return any error?
Click to expand...
Click to collapse
No, no error, it said "Daemon launched successfully" or something along those lines, my phone turned off and turned back on to the HTC boot screen.
Ok, try this: if the phone is still on keep the power button pressed till it restarts and press also vol down button until you arenin the bootloader; if the device is off, enter bootloader keeping power and vol down button pressed... Now my suggestion is to flash a custom recovery and a custom rom, you will get root privileges and the phone will work again...
Sent from Somewhere Over The Rainbow...
If you are unlocked (you see it in bootloader) you can flash a custom recovery and a custom rom. Look up for your favorite Recovery and flash it.
Download the img File to directory where you have the fastboot files and run this code in command prompt
Code:
fastboot flash recovery name_of_recovery.img
After it you can boot into Bootloader and turn to recovery to get access to phone and SD Card/flash Rom
Did you flash boot.img and erased the cache?
Sent from my HTC One X using Tapatalk 2
Okay, so I successfully flashed TWRP and launched into recovery mode with it. How I get the custom ROM files on my SD card, when I plug my phone into my computer with USB it doesn't show up in the drives section, so I can't open up the SD card.
Another thing is that with the latest version of TWRP for my phone touch doesn't work in the recovery mode. There's a version that does, but it says it doesn't have USB mount or something like that. What's the next step?
You need to mount sd card via recovery, and having the touchscreen working is better as it will be easier to move inside aroma installer... Use philz recovery (if you want a sense rom use 5.15.9, if you want kitkat use the last version), enter the recovery, plug the phone into pc, mount sdcard via recovery, copy the zip over it and follow the instructions to install rom... You can find the instructions in every rom thread op... Ask if you need more help
Sent from Somewhere Over The Rainbow...
Thanks for all the help, I am really starting to get a better understanding of how this actually works. I flashed Philz recovery and went into recovery with it. Then I went to mount and mounted USB Storage. Is this the right thing? It still doesn't show up on my PC
ChaosDuck said:
Thanks for all the help, I am really starting to get a better understanding of how this actually works. I flashed Philz recovery and went into recovery with it. Then I went to mount and mounted USB Storage. Is this the right thing? It still doesn't show up on my PC
Click to expand...
Click to collapse
which version did you flash? sometimes it keeps a couple of minutes before popping up the sdcard in pc, but i ensure you that 5.15.9 usb mout feature works fine... some users (me too) faced some issues with some 6.x.y version (sorry, i don't remember which one as i still use sense rom and so philz 5.15.9)
lukes91 said:
which version did you flash? sometimes it keeps a couple of minutes before popping up the sdcard in pc, but i ensure you that 5.15.9 usb mout feature works fine... some users (me too) faced some issues with some 6.x.y version (sorry, i don't remember which one as i still use sense rom and so philz 5.15.9)
Click to expand...
Click to collapse
I flashed latest version 6.19.3. There are only 3 versions available as far as I can see. They are:
6.19.3
6.12.8
6.07.9
I'll try flashing the two other versions and see what happens.
ChaosDuck said:
I flashed latest version 6.19.3. There are only 3 versions available as far as I can see. They are:
6.19.3
6.12.8
6.07.9
I'll try flashing the two other versions and see what happens.
Click to expand...
Click to collapse
you can find 5.15.9 here
lukes91 said:
you can find 5.15.9 here
Click to expand...
Click to collapse
Thank you! It finally showed up on my PC after a minute. I wanted to try Android 4.4.2 KitKat custom ROM "Carbon" so I want to ask a bit of an off-topic question. What are the GApps thing that I am told to install with the ROM? Why are they so important, what do they do?
ChaosDuck said:
Thank you! It finally showed up on my PC after a minute. I wanted to try Android 4.4.2 KitKat custom ROM "Carbon" so I want to ask a bit of an off-topic question. What are the GApps thing that I am told to install with the ROM? Why are they so important, what do they do?
Click to expand...
Click to collapse
those are google apps (i bet you understood what they are for just reading the full name ) i'm sorry to tell you that philz 5.15.9 can't flash 4.4.2 android, so you should update it... but now you have the zip on sdcard at least... give a look at latest TWRP you can find here in the OP #2 (everyhing should work with this version, but i still didn't test it, so i can't ensure it... i told you to use Philz 5.15.9 because i was 100% sure USB mount works with that recovery, and we needed to put a rom zip on sdcard ) now that you understood how things work, you can choose the recovery you want according to your reqirements have a nice flash man, and feel free to ask me if you need any further help
lukes91 said:
those are google apps (i bet you understood what they are for just reading the full name ) i'm sorry to tell you that philz 5.15.9 can't flash 4.4.2 android, so you should update it... but now you have the zip on sdcard at least... give a look at latest TWRP you can find here in the OP #2 (everyhing should work with this version, but i still didn't test it, so i can't ensure it... i told you to use Philz 5.15.9 because i was 100% sure USB mount works with that recovery, and we needed to put a rom zip on sdcard ) now that you understood how things work, you can choose the recovery you want according to your reqirements have a nice flash man, and feel free to ask me if you need any further help
Click to expand...
Click to collapse
I flashed to the newest Philz recovery again and successfully installed both ROM and GApps. Rebooting phone now, I hope it works... Been on HTC screen for a while though.
ChaosDuck said:
I flashed to the newest Philz recovery again and successfully installed both ROM and GApps. Rebooting phone now, I hope it works... Been on HTC screen for a while though.
Click to expand...
Click to collapse
have you flashed boot.img via fastboot and erased cache via fastboot? the commands are
fastboot flash boot boot.img
fastboot erase cache
remember that first boot can take a while (in some cases up to ten minutes)
lukes91 said:
have you flashed boot.img via fastboot and erased cache via fastboot? the commands are
fastboot flash boot boot.img
fastboot erase cache
remember that first boot can take a while (in some cases up to ten minutes)
Click to expand...
Click to collapse
Ahhh yes, it seems that was the only thing I still needed to do. It's on the Carbon launch screen now. Thanks a bunch man, I literally love you! :laugh:
ChaosDuck said:
Ahhh yes, it seems that was the only thing I still needed to do. It's on the Carbon launch screen now. Thanks a bunch man, I literally love you! :laugh:
Click to expand...
Click to collapse
lol, you're welcome, happy i've helped you
Hi, sorry for my bad english, I speak french.
I unlocked my bootloader and rooted my phone a long time ago (6-7 months) and it was working fine (I was able to use "root-only" applications).
I decided to install a custom rom, to get better performance, after getting help from many places, I choose CyanogenMod from this link: http://forum.xda-developers.com/showthread.php?t=2653961
I tried to install it using fastboot in windows, but like the last time (when I rooted my phone) fastboot wasn't working.
So I did it in linux (which worked for me before) and I installed a recovery (CWM). Then I did a backup, I copied the backup on my computer, then I rebooted, then I wiped everything (cache, data, dalvik, etc...) and installed CM10. After the installation, I rebooted, but it won't work!
It is stuck on the "boot screen" for at least 15 minutes.
What should I do?
Thanks!
From what you wrote, it seems you're s-on so after flashing any rom, you MUST flash kernel as well. The kernel is probably included in the zip file you downloaded it's usually called boot.img. You have to extract the kernel and put it in the root directory of your sdcard (same place you put the rom in).
So:
1- Wipe everything.
2- Flash rom (.zip).
3- Flash kernel (.img).
4- Reboot.
Let me know what happens.
swhatevers said:
From what you wrote, it seems you're s-on so after flashing any rom, you MUST flash kernel as well. The kernel is probably included in the zip file you downloaded it's usually called boot.img. You have to extract the kernel and put it in the root directory of your sdcard (same place you put the rom in).
So:
1- Wipe everything.
2- Flash rom (.zip).
3- Flash kernel (.img).
4- Reboot.
Let me know what happens.
Click to expand...
Click to collapse
It working in the first time.After reboot, it stuck in boot loop and I must flash boot.img manual from pc again.
---------- Post added at 09:42 PM ---------- Previous post was at 08:54 PM ----------
Ok, I've resolve this problem because I've not complete flash kernel .So, you should try this way .It follow on below link
http://forum.xda-developers.com/showthread.php?t=1996665
Hi guys
I'm very new to flashing phones, so please baby steps
I'm trying to flash the Cyanogenmod 12.1 to an elderly Xperia M.
I've tried asking for assistance on CM's page, but so far no luck, I hope somebody here is more helpfull.
I've downloaded the zip file, unzipped it and uploaded boot.img to it, but when it reboots, it just shows the Sony logo, and a blue led, but nothing else.
If I shut it down by removing the battery, start it up and press the volume rocker it boots up in Cyanogemnod recovery, but not cwm recovery.
Can somebody tell me what I'm doing wrong? I'm trying to follow the CM article regarding this specific CM build.
fribse said:
Hi guys
I'm very new to flashing phones, so please baby steps
I'm trying to flash the Cyanogenmod 12.1 to an elderly Xperia M.
I've tried asking for assistance on CM's page, but so far no luck, I hope somebody here is more helpfull.
I've downloaded the zip file, unzipped it and uploaded boot.img to it, but when it reboots, it just shows the Sony logo, and a blue led, but nothing else.
If I shut it down by removing the battery, start it up and press the volume rocker it boots up in Cyanogemnod recovery, but not cwm recovery.
Can somebody tell me what I'm doing wrong? I'm trying to follow the CM article regarding this specific CM build.
Click to expand...
Click to collapse
After flashing the boot.img with your Flashtool (I guess?), did you flash the ROM? I mean the CM12.1 ROM zip?
AndyPhoenix9879 said:
After flashing the boot.img with your Flashtool (I guess?), did you flash the ROM? I mean the CM12.1 ROM zip?
Click to expand...
Click to collapse
Hi Andy
Thankyou for your assistance.
I've tried following the wiki guide, so I've downloaded the CM12.1, unzipped it, and used 'fastboot' to copy it into the phone, and then reboot it (as it is explained in the wiki article wiki.cyanogenmod.org/w/Install_CM_for_nicki
I don't have a Flashtool installed, should I use another method for updating?
fribse said:
Hi Andy
Thankyou for your assistance.
I've tried following the wiki guide, so I've downloaded the CM12.1, unzipped it, and used 'fastboot' to copy it into the phone, and then reboot it (as it is explained in the wiki article wiki.cyanogenmod.org/w/Install_CM_for_nicki
I don't have a Flashtool installed, should I use another method for updating?
Click to expand...
Click to collapse
Best to use Flashtool, it's much safer and the information and guidelines are already prepared in xda. So any doubts could be resolved rather quickly if any. Anyway goodluck and happy flashing!
Do you habe unlocked Bootloader?
Sent from my C1904 using XDA Free mobile app
AndyPhoenix9879 said:
Best to use Flashtool, it's much safer and the information and guidelines are already prepared in xda. So any doubts could be resolved rather quickly if any. Anyway goodluck and happy flashing!
Click to expand...
Click to collapse
Thanks, can you tell me where I can find the right flash tool, and where I can read more about how to do this?
fribse said:
Thanks, can you tell me where I can find the right flash tool, and where I can read more about how to do this?
Click to expand...
Click to collapse
Flashtool: http://www.flashtool.net/index.php
Tutorial(Basics): http://forum.xda-developers.com/showthread.php?t=2697277
Happy flashing and all the best @fribse
AndyPhoenix9879 said:
Flashtool: http://www.flashtool.net/index.php
Tutorial(Basics): http://forum.xda-developers.com/showthread.php?t=2697277
Happy flashing and all the best @fribse
Click to expand...
Click to collapse
Hi Andy
Ok, after finally getting it downloaded via the torrent, and actually getting the right file instead of a bunch of adware from the download links, I've tried starting it.
It says I'm not in USB debugging mode.
But to enable that I have to get into the phone, and it's currently not booting.
The flashboot refers to a 'back' button, but I don't have a physical back button on the C1905, what on earth do I do?
Ahaaa, part success, it needed charging. So after having it charged, and then connected to the phone, I've been able to flash a 'GLOBAL' firmware to the phone.
It now starts up as it should in the global firmware, and as soon as PC Companion saw it, it told me there is an update.
So that's great. Now I'm going to try with the Cyanogenmod again But I guess I have to find a '.ftf' version of it?
fribse said:
Ahaaa, part success, it needed charging. So after having it charged, and then connected to the phone, I've been able to flash a 'GLOBAL' firmware to the phone.
It now starts up as it should in the global firmware, and as soon as PC Companion saw it, it told me there is an update.
So that's great. Now I'm going to try with the Cyanogenmod again But I guess I have to find a '.ftf' version of it?
Click to expand...
Click to collapse
Ok, so right now, you are using stock FW and unlocked bootloader?
Step 1. Prepare files.
You will need the CM zip, Google Apps Zip, and a signed CWM Zip. Where do you find a signed CWM Zip? Look at Step 2.
Step 2.Sign the CWM zip from here, with the tool from here.
Step 3. Put the 3 Zip files on your SD card. Also, extract the boot.img and keep it somewhere easily accessible.
Step 4. I'll assume you have installed the nicki drivers for flashtool. Launch flashtool. The click the lightning bolt icon and select fastboot. With your xperia m sitched off, hold the VOL_UP key and connect USB cable. You should get a blue LED. Flash the boot.img as kernel.
Step 5. Select reboot into system. When a magenta LED shows, press a volume button. You should have booted to CM recovery. Browse to install ZIP, and flash the signed CWM zip.
Step 6. Power the phone off and repeat step 5. You should boot into CWM. Take a full backup of your phone first. Then wipe cache and data. Finally, flash CM zip and google apps zip.
Step 7. Wipe cache and reboot the phone.
Step 8. Sit back chillax, first boot will seem to take ages. Only after about 20 mins should you be concerned.
ENJOY CM12.1
Just to let you know, apps will take up more memory on Lollipop than other earlier versions. This is normal.
That worked perfectly, thankyou very much.
I now have a CM12.1 Xperia M, very nice
theperson333 said:
Ok, so right now, you are using stock FW and unlocked bootloader?
Step 1. Prepare files.
You will need the CM zip, Google Apps Zip, and a signed CWM Zip. Where do you find a signed CWM Zip? Look at Step 2.
Step 2.Sign the CWM zip from here, with the tool from here.
Step 3. Put the 3 Zip files on your SD card. Also, extract the boot.img and keep it somewhere easily accessible.
Step 4. I'll assume you have installed the nicki drivers for flashtool. Launch flashtool. The click the lightning bolt icon and select fastboot. With your xperia m sitched off, hold the VOL_UP key and connect USB cable. You should get a blue LED. Flash the boot.img as kernel.
Step 5. Select reboot into system. When a magenta LED shows, press a volume button. You should have booted to CM recovery. Browse to install ZIP, and flash the signed CWM zip.
Step 6. Power the phone off and repeat step 5. You should boot into CWM. Take a full backup of your phone first. Then wipe cache and data. Finally, flash CM zip and google apps zip.
Step 7. Wipe cache and reboot the phone.
Step 8. Sit back chillax, first boot will seem to take ages. Only after about 20 mins should you be concerned.
ENJOY CM12.1
Just to let you know, apps will take up more memory on Lollipop than other earlier versions. This is normal.
Click to expand...
Click to collapse
Hey, I am new to android. I tried your tutorial and millions of others to put CM 1.2 on my Sony Xperia M, but I had no luck at all. I am always getting errors like "Unable to mount /data" "e: format_volume failed to mount data/, formatting instead" "failed to mount dev/block/platform/msm_sdcc.1/by-name/userdata". I don't know what I am doing wrong. The first tutorial I followed was the one at the official wiki from the Cyanogenmod, and I got those errors. I didn't have a backup, but I managed to flash a stock rom I downloaded on the internet. Can you help me? I've been awake for 20hours trying to solve this but I always get the same error
---------- Post added at 11:14 AM ---------- Previous post was at 11:06 AM ----------
theperson333 said:
Ok, so right now, you are using stock FW and unlocked bootloader?
Step 1. Prepare files.
You will need the CM zip, Google Apps Zip, and a signed CWM Zip. Where do you find a signed CWM Zip? Look at Step 2.
Step 2.Sign the CWM zip from here, with the tool from here.
Step 3. Put the 3 Zip files on your SD card. Also, extract the boot.img and keep it somewhere easily accessible.
Step 4. I'll assume you have installed the nicki drivers for flashtool. Launch flashtool. The click the lightning bolt icon and select fastboot. With your xperia m sitched off, hold the VOL_UP key and connect USB cable. You should get a blue LED. Flash the boot.img as kernel.
Step 5. Select reboot into system. When a magenta LED shows, press a volume button. You should have booted to CM recovery. Browse to install ZIP, and flash the signed CWM zip.
Step 6. Power the phone off and repeat step 5. You should boot into CWM. Take a full backup of your phone first. Then wipe cache and data. Finally, flash CM zip and google apps zip.
Step 7. Wipe cache and reboot the phone.
Step 8. Sit back chillax, first boot will seem to take ages. Only after about 20 mins should you be concerned.
ENJOY CM12.1
Just to let you know, apps will take up more memory on Lollipop than other earlier versions. This is normal.
Click to expand...
Click to collapse
By the way. I can access the Recovery mod, and I have a 512mb external card to put the files, I already tried the sideload method and put the zip files into the card as you said. But no luck. And another point, I wasn't able to apply the step 5, so I flashed the CWM staight, and I had errors when I tried to install both CM 1.2 and Gapps. I would be more than thankful if you helped me.
fr3d3r1ko said:
Hey, I am new to android. I tried your tutorial and millions of others to put CM 1.2 on my Sony Xperia M, but I had no luck at all. I am always getting errors like "Unable to mount /data" "e: format_volume failed to mount data/, formatting instead" "failed to mount dev/block/platform/msm_sdcc.1/by-name/userdata". I don't know what I am doing wrong. The first tutorial I followed was the one at the official wiki from the Cyanogenmod, and I got those errors. I didn't have a backup, but I managed to flash a stock rom I downloaded on the internet. Can you help me? I've been awake for 20hours trying to solve this but I always get the same error
---------- Post added at 11:14 AM ---------- Previous post was at 11:06 AM ----------
By the way. I can access the Recovery mod, and I have a 512mb external card to put the files, I already tried the sideload method and put the zip files into the card as you said. But no luck. And another point, I wasn't able to apply the step 5, so I flashed the CWM staight, and I had errors when I tried to install both CM 1.2 and Gapps. I would be more than thankful if you helped me.
Click to expand...
Click to collapse
Just to check, did you install stock at least once after BL unlock? It is required to fix the data partition. Flash the stock ftf and let it boot. Then proceed with the instructions I provided.
Please remember that YOU, and only YOU are responsible for your actions. These instructions are provided "as is , with all faults".
theperson333 said:
Just to check, did you install stock at least once after BL unlock? It is required to fix the data partition. Flash the stock ftf and let it boot. Then proceed with the instructions I provided.
Please remember that YOU, and only YOU are responsible for your actions. These instructions are provided "as is , with all faults".
Click to expand...
Click to collapse
Not sure what I did but I managed to work, I guess it was checking the reset customization on Flashtool. Thank you for your help!
Does the 'Full backup' from 6 include absolutely everything I could possibly need to go back to the exact same state my phone is currently in? In other words, is it like a copy of everything that I could possibly change or mess up on my phone? I always thought nandroid backup did that, but now I just read that doesn't backup the kernel for example.
And I'm assuming this 'full backup' can be done using flashtool, right?
Thanks
Hello People,
yesterday I spent the whole day trying to figure out how to root my phone. In the end I found a tutorial on chip.de but overread it was for the non compact version.
So I used fastboot to flash these files Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img” and “Z_DooMLoRD_insecure_FW-350.img
Well, as you might guess it didn't work.
Now it doesn' boot anymore.
Does anyone have a suggestion what I could do now. Phone is still recognized in fastboot or sonyflashtool and can enter download mode.
Thanks for your time
Regards
Jürgen
jeffpendejo said:
Hello People,
yesterday I spent the whole day trying to figure out how to root my phone. In the end I found a tutorial on chip.de but overread it was for the non compact version.
So I used fastboot to flash these files Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img” and “Z_DooMLoRD_insecure_FW-350.img
Well, as you might guess it didn't work.
Now it doesn' boot anymore.
Does anyone have a suggestion what I could do now. Phone is still recognized in fastboot or sonyflashtool and can enter download mode.
Thanks for your time
Regards
Jürgen
Click to expand...
Click to collapse
Assuming you have some ROM zip or backup on your phone somewhere that you can flash, this will get you into recovery:
Download boot IMG here - https://mega.nz/#!QsEUTY6K!MCc5GZMGgFu66C8ECtdrtQ64jOQ_1MDPWglyxAP5Gu4
Download recovery IMG here - https://mega.nz/#!E4UQwIoZ!UFpur2wY3tIAU7SdjuEg5fUA6N4BAVwX_TeK_CFpTyo
Copy both to /adb directory on computer, then:
fastboot flash boot boot.img, then:
fastboot flash recovery recovery.img.
Then start phone, and press volume up or down when you see the led.
levone1 said:
Assuming you have some ROM zip or backup on your phone somewhere that you can flash, this will get you into recovery:
Download boot IMG here -
Download recovery IMG here -
Copy both to /adb directory on computer, then:
fastboot flash boot boot.img, then:
fastboot flash recovery recovery.img.
Then start phone, and press volume up or down when you see the led.
Click to expand...
Click to collapse
Thank you very much ! This got me into recovery! Now the problem is that I have no backup and no rom.zip on my phone. Is there a way to put a fitting file on the phone?
Edit: Ok now I found out I can put a rom.zip on my sd card and then mount sd card in twrp and install rom fron there, right? Could somebody point me towards a stock rom preferably with root access?
jeffpendejo said:
Thank you very much ! This got me into recovery! Now the problem is that I have no backup and no rom.zip on my phone. Is there a way to put a fitting file on the phone?
Edit: Ok now I found out I can put a rom.zip on my sd card and then mount sd card in twrp and install rom fron there, right? Could somebody point me towards a stock rom preferably with root access?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24269982087012877
From this thread:
https://forum.xda-developers.com/so...503-14-6-1-236customizedinpre-rooted-t3265543
From this thread:
https://forum.xda-developers.com/so...503-14-6-1-236customizedinpre-rooted-t3265543[/QUOTE]
Thanks again!
But will it be ok even though it says India generic and I'm in Germany?
jeffpendejo said:
Thank you very much ! This got me into recovery! Now the problem is that I have no backup and no rom.zip on my phone. Is there a way to put a fitting file on the phone?
Edit: Ok now I found out I can put a rom.zip on my sd card and then mount sd card in twrp and install rom fron there, right? Could somebody point me towards a stock rom preferably with root access?
Click to expand...
Click to collapse
If you have trouble, use these boot/recovery files - https://mega.nz/#!lh9i0AYI!iH3Vw5keSNo66CHvq3c6V9HMCWAWJ5FIYcZZ35U254g
The first ones are from CM11, I don't know how they'll do with flashing an LP prf...
---------- Post added at 06:52 AM ---------- Previous post was at 06:52 AM ----------
jeffpendejo said:
From this thread:
https://forum.xda-developers.com/so...503-14-6-1-236customizedinpre-rooted-t3265543
Click to expand...
Click to collapse
Thanks again!
But will it be ok even though it says India generic and I'm in Germany?[/QUOTE]
Doesn't matter...
levone1 said:
If you have trouble, use these boot/recovery files -
The first ones are from CM11, I don't know how they'll do with flashing an LP prf...
---------- Post added at 06:52 AM ---------- Previous post was at 06:52 AM ----------
Thanks again!
But will it be ok even though it says India generic and I'm in Germany?
Click to expand...
Click to collapse
Doesn't matter...[/QUOTE]
@levone1 Well, unfortunately this didnt work. Got stuck while flashing... By the way the first two files were twrp and the second was cyanogen recover. Now I fastbooted twrp again.
Do I have to root first?
jeffpendejo said:
Doesn't matter...
Click to expand...
Click to collapse
@levone1 Well, unfortunately this didnt work. Got stuck while flashing... By the way the first two files were twrp and the second was cyanogen recover. Now I fastbooted twrp again.
Do I have to root first?[/QUOTE]
Second link was a zip with CM boot img and twrp3 img. The boot img probably includes CM recovery, but if you flash the twrp3 img, you should be able to get into twrp 3, which will flash the rom.
Make sure your fastboot command matches the filename.
---------- Post added at 10:50 AM ---------- Previous post was at 10:15 AM ----------
jeffpendejo said:
Doesn't matter...
Click to expand...
Click to collapse
@levone1 Well, unfortunately this didnt work. Got stuck while flashing... By the way the first two files were twrp and the second was cyanogen recover. Now I fastbooted twrp again.
Do I have to root first?[/QUOTE]
Alternately you could flash CM11 - https://www.google.com/url?sa=t&sou...T3Zoa6K8nDjMW3OlQ&sig2=-5eFhWzJFl7zHnNgDnrUXQ - with the first boot/recovery, then download a different rom, and use Rashr app to flash boot img from that rom.
Or, use Flashtool to flash stock, then root, etc