is there a way to go from 10.0 to 10.1 (Cyanogenmod) in a dirty flash or is the only way to do a wipe? I flashed the 3/13 nightly and either I accidentally set a switch to wipe or that is the only way to go up... can anyone let me know please?
tgeery said:
is there a way to go from 10.0 to 10.1 (Cyanogenmod) in a dirty flash or is the only way to do a wipe? I flashed the 3/13 nightly and either I accidentally set a switch to wipe or that is the only way to go up... can anyone let me know please?
Click to expand...
Click to collapse
answered my own question, I think. I did NOT turn on the wipe data & cache and it appears to be just doing an "upgrade" install - it is optimizing apps on the first reboot.
I'll post back again with any further details...
cm10 is 4.1.2 based, and cm10.1 is 4.2.2 based. lots of big changes, eg sdcard folder structure. full wipe is highly recommended.
strumcat said:
cm10 is 4.1.2 based, and cm10.1 is 4.2.2 based. lots of big changes, eg sdcard folder structure. full wipe is highly recommended.
Click to expand...
Click to collapse
yeah, I just did a dirty flash and I am seeing some funny behaviors in some things so I may just do that. I hate having to redo the world but then, I put a lot of emphasis on having the phone behave, too...
thanks.
strumcat said:
cm10 is 4.1.2 based, and cm10.1 is 4.2.2 based. lots of big changes, eg sdcard folder structure. full wipe is highly recommended.
Click to expand...
Click to collapse
did a wipe data & cache and rebuilt with 10.1 and things seem to be working well so far... thanks for the push.
although, I will say that this version of CM (yes, a nightly so it is expected) is buggy. the lock screen toggle doesn't work (even after a wipe install) consistently (sometimes does, sometimes doesn't) and I've discovered at least two apps or widgets that no longer work with this ROM - either they don't work with the CM version of 4.2.2 or they are incompatible with 4.2.2 itself, not sure... but the Airplane mode toggle widget doesn't work at all and I use an app called Timeriffic and the airplane mode toggle in that app doesn't work either.
researching both of those to see if I can find any more info...
tgeery said:
although, I will say that this version of CM (yes, a nightly so it is expected) is buggy. the lock screen toggle doesn't work (even after a wipe install) consistently (sometimes does, sometimes doesn't) and I've discovered at least two apps or widgets that no longer work with this ROM - either they don't work with the CM version of 4.2.2 or they are incompatible with 4.2.2 itself, not sure... but the Airplane mode toggle widget doesn't work at all and I use an app called Timeriffic and the airplane mode toggle in that app doesn't work either.
researching both of those to see if I can find any more info...
Click to expand...
Click to collapse
haven't been able to get WiFi Tether (the app) to work and can't get built in wifi tether to work either... between that and a few other issues, seriously considering going back to 10.0 from a backup until things get a little better refined. love the new features but I really use wifi tether and I'm not finding any good info on what to do to fix the problem...
Related
whenever I load a cm10 based rom my wifi drops after 2 minutes. stock based wifi is consistent but as soon as I load cm10, jelly ro, or even the new experimental m1 build with always drops. to reconnect I have to turn off and on wifi. is there any solution? I was reading about cm10 modems and I didn't install anything besides cm10, aosp jelly camera and jelly gapps. any help will be greatly appreciated!
ps just realized I install the camera on every build could that mess it up lol
I've been running several nightlies over the last few weeks and now I'm solid with the M1 build and at this point I have never experienced an issue with wifi dropping.
What steps did you take to flash CM10? (cache clearing? Full wipe? Permissions?)
Ian
Ian1331 said:
I've been running several nightlies over the last few weeks and now I'm solid with the M1 build and at this point I have never experienced an issue with wifi dropping.
What steps did you take to flash CM10? (cache clearing? Full wipe? Permissions?)
Ian
Click to expand...
Click to collapse
I did everything except permissions. Are there permissions for wifi?
No I was just mentioning the common steps so you would tell us everything. Sounds like you've installed the rom correctly but obviously their's an issue. I'm assuming that this issue is right after a clean install and not after you've installed juice defender or something like that? Assuming you're installing the correct version of CM10 for your phone (d2att?) their shouldn't be anything else needed to make wifi work (ie modem file).
If I were you I'd be tempted to redownload CM10 m1 and jellybean Google apps. Ensure you have the recommended version of cwm installed. Clear caches, full wipe, flash CM10 and apps followed by clearing of the caches again. Forget the camera initially and test the wifi. If it still doesn't work we'd need to start looking at logs.
Ian
Ian1331 said:
No I was just mentioning the common steps so you would tell us everything. Sounds like you've installed the rom correctly but obviously their's an issue. I'm assuming that this issue is right after a clean install and not after you've installed juice defender or something like that? Assuming you're installing the correct version of CM10 for your phone (d2att?) their shouldn't be anything else needed to make wifi work (ie modem file).
If I were you I'd be tempted to redownload CM10 m1 and jellybean Google apps. Ensure you have the recommended version of cwm installed. Clear caches, full wipe, flash CM10 and apps followed by clearing of the caches again. Forget the camera initially and test the wifi. If it still doesn't work we'd need to start looking at logs.
Ian
Click to expand...
Click to collapse
ya shes still being stubborn. how do i show logs for you?
Hey, I was hoping someone else would chime in about the logs. I have used "alogcat" for logs before but I'm not familiar with wifi filters so I'm probably not the best person to help at this point.
Anyone?
Ian
Running the new cm10 15th build wifi is more stable but still drops after about 10 minutes. Any help would be very kind.
With all your flashing and even using latest versions I'd start to wonder if something to do with the rom is not compatible with you're rougher. Have a you tested it on an alternate wifi source? Maybe a neighbors open signal or something. It's a noob thought but it couldn't hurt.
Sent from my SGS3 I747m on CyanogenMod 10 using xda premium
Yes I have. Currently on a different network right now and it was still dropping. Less frequently but still happening.
I've been trying to get alogcat working on my phone but the log is blank no matter what I do. Either way, the main developer thread just got a post about wifi and how it's note staying connected. No responses yet but it would become a good place to follow as that's where the CM brains are. If I can make some sense offer this log business ill get back to you without some more ideas.
That post: http://forum.xda-developers.com/showthread.php?p=31612608
Sent from my SGS3 i747m (Bell) on CM10 (Yesterday's Nightly) using xda premium
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
There we go, if you go into settings > wifi > menu button > advanced their is several options about wifi timeout, power saving and sleep mode. Their is a frequency setting as well you might want to toy with. I think I stumbled upon these options a while back but never had any use for them.
Sent from my SGS3 i747m (Bell) on CM10 (Yesterday's Nightly) using xda premium
Ian1331 said:
I've been trying to get alogcat working on my phone but the log is blank no matter what I do. Either way, the main developer thread just got a post about wifi and how it's note staying connected. No responses yet but it would become a good place to follow as that's where the CM brains are. If I can make some sense offer this log business ill get back to you without some more ideas.
That post: http://forum.xda-developers.com/showthread.php?p=31612608
Sent from my SGS3 i747m (Bell) on CM10 (Yesterday's Nightly) using xda premium
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
There we go, if you go into settings > wifi > menu button > advanced their is several options about wifi timeout, power saving and sleep mode. Their is a frequency setting as well you might want to toy with. I think I stumbled upon these options a while back but never had any use for them.
Sent from my SGS3 i747m (Bell) on CM10 (Yesterday's Nightly) using xda premium
Click to expand...
Click to collapse
None of those settings ever help me. Can anyone report if CM10 is working perfect on there rogers galaxie s3? Tomorrow is my last day to return my phone so if it's every odd phone I'll just get a replacement.
T-HO6969 said:
None of those settings ever help me. Can anyone report if CM10 is working perfect on there rogers galaxie s3? Tomorrow is my last day to return my phone so if it's every odd phone I'll just get a replacement.
Click to expand...
Click to collapse
Same problem here with wifi on Galaxy Note n7000. It started since I moved from CM9 to CM10.. Now trying every new Nightly, but with no success. Still losing wifi spot every 1min - 10minutes.
Thought if I download something, then wifi is stable, but soon after download is finished, wifi connection is dropped.
Working for me ...
T-HO6969 said:
None of those settings ever help me. Can anyone report if CM10 is working perfect on there rogers galaxie s3? Tomorrow is my last day to return my phone so if it's every odd phone I'll just get a replacement.
Click to expand...
Click to collapse
I have a Rogers S3, and am currently running CM10 NIGHTLY 20120924. Everything appears to be working well, including Wifi; however, there is the occasional (and I mean quite rare) glitch where Wifi does seem to have a bit of difficulty connecting. Again, this is extremely rare on my device, and it may simply be something unrelated to the ROM.
Peter
YES!! This has occurred for me on the stock ATT TW rom and then same thing happened on EVERY OTHER ROM I tried after that including AOKP, LiquidRom, Aristodemos....
It's annoying and I don't know what to do.
The wifi will connect and stay blue for 5 seconds then turn grey for 10 more sec and then wifi will completely disconnect and wont reconnect unless i turn wifi off and then on again. im at a complete LOSS.
anyone have any ideas?
Exchange it. Don't put it off just use titanium backup and switch your phone.
I am having issues with WiFi on CM10 also. I can use the internet like always but the signal bars will go gray sometimes then back to blue. While they are gray I can browse, usually with chrome, but youtube will not work. It is odd that some apps won't work but some will. It may be dropping and coming back but is not strong enough to stream video.
I am using CM10 10/9/12 nightly and an N600 Netgear router. I am starting to think the Netgear router might be my culprit. I have always had dropout issues with them in the past, although, my computers, 360, and PS3 have no issues. Maybe I could just make it a signal repeater and get a Linksys again.
Has anyone else had this issue, think it is the Netgear? Should I try a new router firmware like dd wrt?
Android 4.0.4 error installing cyanogen 10
hi there, I am having trouble installing Cyanogen 10 on my galaxy s3 I747m android 4.0.4
rooted and running cwm 5.5.0.5.
i get an error that says status 7. installation aborted.
Does anyone know why I'm having this error?
thank you
androidehca said:
hi there, I am having trouble installing Cyanogen 10 on my galaxy s3 I747m android 4.0.4
rooted and running cwm 5.5.0.5.
i get an error that says status 7. installation aborted.
Does anyone know why I'm having this error?
thank you
Click to expand...
Click to collapse
Because you are in the wrong thread.
And you need to redownload and wipe everything.
thacounty said:
Because you are in the wrong thread.
And you need to redownload and wipe everything.
Click to expand...
Click to collapse
my bad. I'll try to do that as soon as the website come back up to redownload the file and try it again.
thank you
androidehca said:
my bad. I'll try to do that as soon as the website come back up to redownload the file and try it again.
thank you
Click to expand...
Click to collapse
Meant that kind of silly, but yea you should just redownload, that is usually the problem. Try out Euroskanks version for now if you don't want to wait. Jellybro.
I cant find anything in the forums but I have been using mmuzzys roms for about a month or two now and recently, the september 29th 4.1.1 and 4.1.2 roms have been giving me problems with my widgets. They all work but they dont refresh their images. For example when I press the wifi toggle it will toggle my wifi but the image will stay lit no matter what. My play music widget will show the same artist no matter what I change it to. When I restart my phone everything works but this happens about 2 to 3 times a day and it gets annoying and drains battery. Any ideas? I have a verizon nexus.
Oats N' Honey said:
I cant find anything in the forums but I have been using mmuzzys roms for about a month or two now and recently, the september 29th 4.1.1 and 4.1.2 roms have been giving me problems with my widgets. They all work but they dont refresh their images. For example when I press the wifi toggle it will toggle my wifi but the image will stay lit no matter what. My play music widget will show the same artist no matter what I change it to. When I restart my phone everything works but this happens about 2 to 3 times a day and it gets annoying and drains battery. Any ideas? I have a verizon nexus.
Click to expand...
Click to collapse
I haven't heard this from anyone else. Sounds strange. Did you do a clean install or did you dirty flash over the previous ROM install? It might be worth clean installing if not. Other things to try would be to clear caches, fix permissions, etc.
mmuzzy said:
I haven't heard this from anyone else. Sounds strange. Did you do a clean install or did you dirty flash over the previous ROM install? It might be worth clean installing if not. Other things to try would be to clear caches, fix permissions, etc.
Click to expand...
Click to collapse
For 4.1.2 I dirty flashed it, but for the september 29th 4.1.1 I did a clean flash trying to fix the issue but it still happened. What should I clear caches of? And which permissions? Do you still think I should do a full wipe and reflash? Is there a fourth thing to wipe other than data/factory, cache, and davlik? I thought i read something somewhere and just want to make sure I havent been doing it wrong this entire time. By the way thanks for the reply Muzzy I really love your roms over the tons ive tried.
EDIT - Hey sorry Im an idiot and wasnt doing a full wipe, ever. So I am doing a completely clean flash of 4.1.2. Ill repost in a few hours if the problem happens again.
[EDIT] I meant GAPPs. Damnit.
Hello,
I'm at a loss for what's happening and how to fix it. My GoogleFU is failing and nothing I try seems to work.
Basically, WiFi does not work for me in CM 10.1 RC2 and it's something to do with the GAAPs. Everything is initially fine on a fresh install [edit: I don't know if it matters, but when I flash the latest milestone of AOKP WiFi never works. At the initial set up it connects but fails to authenticate over and over] and it's all going swimmingly at first. When I open the Playstore in these first few moments, it's the last version. Eventually the Playstore updates itself and that's when WiFi stops working. Nothing can connect to anything. In the Playstore I just get a 'failed to connect' message and a 'retry' button that doesn't work. The browser doesn't pull anything up and I can't get any sort of connection until I turn WiFi off and go to data.
I'm really at a loss. If it helps, I'm on the Sasktel version, but it's still the I747 [i747m in the stock ROM] which is the same as Bell/AT&T, right? So that shouldn't matter. I'm flashing the 20130301 GAAPs and even tried the 4.1.2 ones (they didn't work at all). I'm using CWMR 6.0.1.2. I can't figure out what I'm doing wrong. Any advice at all would be greatly appreciated. I don't know why I'm having so much trouble with ROMs on my S3 when it was so much easier to root than my old One V (which is still running CM 10 like a champ with 0 errors - I gave that phone to my sister).
Sorry for the long post, but this has been melting my brain.
so what all are you wiping before these flashes? i would recommend data, cache, dalvik, format /system, format /data when changing ROMs and especially when changing android versions (4.1 to 4.2, etc). If you have a micro sd card, place your ROM, gapps and a backup on there and go through the above wipe procedures.
you should also consider updating your recovery. 6.0.3.1 is the latest. you can flash this in recovery, go to Advanced and reboot recovery for this to take effect.
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.
bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
Redstarr1 said:
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.
Click to expand...
Click to collapse
That is very well said redstarr1 but i dont quite feel as strongly about it as you. I just see it as a logical statement. However it would help if you can expand on your issues somewhat. Did you do a clean install (wipe data / system / cache / dalvik) or just a dirty flash over the top. What network do you connect too and have you tried Changing your carrier in "access point names". Creating a whole thread for an issue but not elaborating on what you have and havent tried really makes it hard to help.
Beta 5
Hi guys,
The latest update beta 5 works just fine but a few bugs.
Sometimes the back button doesn't work, have to restart the phone for it to start working again.
When charging the wireless is activated, and the battery takes longer to charge.
The phone lags now and then but other than that works fine.
If anyone who can post this on the Xperia S development thread I would really appreciate it, I don't have rights to post on the development thread as yet.
Thanks
Beta 6
Hi guys,
The new update of Beta 6 for Paranoid is brilliant.
After the 1st boot the phone is a little slow but after the rom has settled it's very smooth.
So far all I have tested works perfectly, don't like the launcher much though, so I have my own custom launcher, Next launcher works brilliantly and very customizable. The new launcher's that are added aren't very good and would like if they could get the original launcher if possible.
Other than that all is well.
Thanks Paranoidanroid.
Pa beta 4.3 13052014
Thanks deedwar...the rom(PA 4.3 Beta 13052014) works like a charm. My battery lasts for a day...with data on(3G)....although there is issue of random reboots and the date setting to 1972th year...but i think it will be resolved in the next version i.e. Beta 5/6....Love your work..really appreciate it. :good:
Beta 6
Beta 6 is out..!! Great...!! Trying it now..!!
What about VOIP apps(Viber, line etc.) ? do they work on the latest build ? Cheers.
The latest build
Yes, the VOIP does work..(Viber, Skype etc.,)on the latest builds ..however, I am having a few system UI crashes while using option of any app from the notification bar..like when you're downloading an app from Playstore and which you wish to stop or pause from the by pulling down the notification bar. or using controls of the stock android walkman app.
---
is this room can accept for xpeeria sl lt26ii
plz help me ti find room to my phone 4.4.2
and how can use this room to my phone
I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?
How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
agugar said:
I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?
Click to expand...
Click to collapse
mgrinwis said:
How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
Click to expand...
Click to collapse
I did factory reset, wipe cache and wipe dalvik but It didn't work.
I had some troubles trying to restore an old backup after the last failed installation. After the failed restore I tried to install Beta 7 again and It worked. I do not know why, but now I have beta7 working perfectly.
Thanks for your help.
problem with Ant+ on Paranoidandroid 4.3
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.
rednose2 said:
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.
Click to expand...
Click to collapse
Unfortunately, ant+ does not work with android version 4.3 and onwards. This has something to do with the drivers I believe (not sure though). So it doesn't matter which ROM you try: all 4.3.x or 4.4.x will not have ant+ support...
Having FCs updating from beanstalk to paranoid
Hey guys! I recently have the beanstalk rom of deedwar for the Acro S and using the current stable build of the rom which is 4.4.278 then i want to try paranoid so heres what i did
1. I copied the paranoid zip file to my phone
2. Flashed the IMG file from the latest version of paranoid rom via Fastboot mode (i extracted it first)
3. Cleared system, factory reset, cache and dalvik cache
4. Installed the zip file
Well it worked and i have the rom but i experienced random FCs so i just reverted back to stock 4.1 ROM and also i am having trouble with some APPS too.. some apps install perfectly but sometimes they dont
WiFi problem :/
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help
alessandropsbra said:
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help
Click to expand...
Click to collapse
i installed a new kernel, now wifi works.
Merry Christmas to all!
JLM, have posted similar on your other site.
Having a problem with the BrokenPop 5.0.2 on my L900 (Sprint Note2)
I can't seem to dial out with this rom. I get popup saying 'Unfortunately, Dialer has stop"
Are others seeing this problem? Is this an rom issue or a setup issue on my end?
I don't expect a daily driver from an early alpha of this rom and do expect issues but I would hope that I can at least make phone calls, after all, the Note 2's primary function is a phone
What I have done so far.
DL and installed rom twice. Both DL check via MD5 OK
Using Philz 6.07.9 recovery
1. Backup internal sdcard to pc
2. Factory reset / Install new rom option
3. Wipe/format internal sdcard
4. Reboot recovery (selected yes to restore root notification)
5. Install rom
6. Boot rom
7. Boot into recovery
8. Flash Gapps
9. Did minor setup of things like Wifi, Google Login, Play Store, DL ES File Manager.
10. Try to make phone call using dialer (phone icon) and get 'Unfortunately, Dialer has stop"
11. DL another free dialer from Play Store.. same error message.
I'm open to suggestions on how to get this to work.
I do like what I see from my little tour around this rom, but not being able to make calls is a major issue for me even for an alpha release. For now I have fallen back to my trusty Community Rom 4.4.2 which has been rock solid for me.
Thanks
bump.... a few people have viewed this posting .. anyone else having this problem? I have since try to install once again.. had some limited success with dialer, but then problem returns. even made a nandroid of when it was working.. still my favorite early lollypop rom for the l900
I installed Broken5.0.2, ran it for 24, and found it seemed to be one of the least reliable functioning loli roms for L900. I personally am preferring the LiquidSmooth 12-23 nightly. The LS rom has overcome the wifi/screen off hotboot bug, the keyboard bug, but still needs the manual GPS fix. Right now it offers hands down the most functioning options at this particular time and the phone is semi reliable??? Lol its doesnt FC but its buggy.
My two cents ... Cheers!
I've tried LiquidSmooth 12-23 nightly also.. one thing I had issues with was I have a OTG usb drive and did not find a way to unmount it. Did you find that function anywhere in LS?.. Other issue I have is no XPOSE support right now.. and I'm not a fan of the AOSP messaging pgms. Lots of things I don't like about TW .. but they make a nice messaging pgm
I did see a semi-workaround where you click on the carrier setting and it kinda resets the capability to make calls.. kinda hokey.. but it seems to work.. Lolllypop is still very early.. and I guess these are the growing pains for being alpha testers. Hopefully over time it will get more mature. Back on 4.4.2 for now.. everything works.. the thing is huge.. over 2gb nandroids using high compression.. but hey, everything works.. Thanks for responding.