Develop Bugs

How Can I ınstall a Cygenmod Rom?

How Can I ınstall a Cygenmod Rom? And Which is the last Cygenmod Rom for my Xperia ARC?

Have a read of the stickys in General and then go find FXPs ROM in development.
Sent from my Phone.

well you need...
-CWM
-unlocked bootloader
-rooted device
and a guide on how to install it

Toggle Asserts ICS (Whatever ROM made for ARC/ARC S)
I also want to know!!!!!! I have been trying to install CM7 on my Arc Lt15i phone for a long time but was never able to due t the dreaded status 7 error. I toggled the script asserts but it still did not help me at all. Then I tried CM9 and it was the same damn disaster! Please let me know if you are able to install it. I hate the fact that I have the ARC S and the ARC Lt15i problem always colliding together. I hope this will not be a problem when JB comes around!

mamameerguevo said:
I also want to know!!!!!! I have been trying to install CM7 on my Arc Lt15i
Click to expand...
Click to collapse
It's simple, flash the kernel, install the ROM, done.

The kernel is in the .zip file(boot.img). You have to extract it. Place the zip file on your arc. Flash the kernel with fastboot or flashtool. Then enter cwm. Wipe Cache, wipe dalvik cache and factory reset. Then install the rom.
Sent from my LT18i using xda app-developers app

Cuerrix said:
The kernel is in the .zip file(boot.img). You have to extract it. Place the zip file on your arc. Flash the kernel with fastboot or flashtool. Then enter cwm. Wipe Cache, wipe dalvik cache and factory reset. Then install the rom.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Simple like that

just follow the instructions provided exactly 100% and you should be fine.
however,
last time i tried to install fxp cm9.0 by flashing the kernel 1st i almost killed my phone and it scared the **** outta me. i cant even enter recovery or fastboot and i had to reflash a stock ftf in flashmode to try it again. i think that flashing the zip file together with a full wipe then only the kernel works better..any ideas?

[Q] Jelly Sandwich 5.0 stuck on logo

So, i want to try Jelly Sandwitch 5.0. It seems nice to me and everybody tells that this is a very fast ROM.
I have unlocked bootloader.
This is how i tryied to instal JS 5:
- root my phone with DoomLord method (downgrade kernel, root then replace the kernel with the .587 one).
- install cwm with x-parts
- reboot and enter the recovery menu
- wipe cache, data, dalvik
- install from zip
Jellybean have an installer that let me choose different option like the launcher, keyboard, some apps and some other options.
I've tryied 3 times using different option like install link2sd, wipe data, and so on, but everytime it ends up just showing me the sony logo, then i have to reinstall everything, root, cwm, etc.
I can't post in the Jelly Sandwich thread on the developer forum so i ask here if i'm doing something wrong.
Also, can you suggest me a rom good as JS5?
Thank you in advance (and sorry for my english)

Leizar84 said:
So, i want to try Jelly Sandwitch 5.0. It seems nice to me and everybody tells that this is a very fast ROM.
I have unlocked bootloader.
This is how i tryied to instal JS 5:
- root my phone with DoomLord method (downgrade kernel, root then replace the kernel with the .587 one).
- install cwm with x-parts
- reboot and enter the recovery menu
- wipe cache, data, dalvik
- install from zip
Jellybean have an installer that let me choose different option like the launcher, keyboard, some apps and some other options.
I've tryied 3 times using different option like install link2sd, wipe data, and so on, but everytime it ends up just showing me the sony logo, then i have to reinstall everything, root, cwm, etc.
I can't post in the Jelly Sandwich thread on the developer forum so i ask here if i'm doing something wrong.
Also, can you suggest me a rom good as JS5?
Thank you in advance (and sorry for my english)
Click to expand...
Click to collapse
Try flashing doom kernel ver.5 . Many users have the boot loop issue with stock kernel.
With doom kernel it works (for me too).
First flash doomkernel, than wipe cache, dalvik cache, data, and format /system
Reflash the rom and it will works.

The only kernel that works on my Arc with Jelly Sandwich 5 is XArc.
I tried other kernels but always get bootloops or crash just after typing my pin number.
XArc is great but don't provide HDMI.
JS 5 is probably the worst JS version. Maybe you should try an older version.
Leizar84 said:
So, i want to try Jelly Sandwitch 5.0. It seems nice to me and everybody tells that this is a very fast ROM.
I have unlocked bootloader.
This is how i tryied to instal JS 5:
- root my phone with DoomLord method (downgrade kernel, root then replace the kernel with the .587 one).
- install cwm with x-parts
- reboot and enter the recovery menu
- wipe cache, data, dalvik
- install from zip
Jellybean have an installer that let me choose different option like the launcher, keyboard, some apps and some other options.
I've tryied 3 times using different option like install link2sd, wipe data, and so on, but everytime it ends up just showing me the sony logo, then i have to reinstall everything, root, cwm, etc.
I can't post in the Jelly Sandwich thread on the developer forum so i ask here if i'm doing something wrong.
Also, can you suggest me a rom good as JS5?
Thank you in advance (and sorry for my english)
Click to expand...
Click to collapse

Maxio said that he's working on a new version. I'll try this one, maybe i'll be able to use it...

Tryied to install JS 6, and neither this can pass the sony logo. Tryied to install it for 2 times, setting different options but no way :crying:

Leizar84 said:
Tryied to install JS 6, and neither this can pass the sony logo. Tryied to install it for 2 times, setting different options but no way :crying:
Click to expand...
Click to collapse
I think you should use cm10 , Its really fast ,and the UI is fantastic
Sent from my Xperia Arc using Tapatalk 2

XnightX said:
I think you should use cm10 , Its really fast ,and the UI is fantastic
Sent from my Xperia Arc using Tapatalk 2
Click to expand...
Click to collapse
I wish, but i can't find instructions on the cm10 thread. And it seems to have problems with wifi, camera, etc...

if you have an unlocked bootloader and installed a custom kernel, I don't think you need x-parts to install CMW as the kernel contains it?

gpfnzl said:
if you have an unlocked bootloader and installed a custom kernel, I don't think you need x-parts to install CMW as the kernel contains it?
Click to expand...
Click to collapse
I have an unlocked bootloader but not a custom kernel with cwm in it. Do you have a link for a guide about installing cwm without x-parts?

I tried it also and i got bootloop. Then i repaired phone and gave up...

After unlocking bootloader, find a custom kernel for your version of android ie: Ginger bread/ICS, DoomLord is a popular choice.
Keep in mind there is a version that can't be rooted, from memory its .62, in this case you have to down grade to .42
Flash the kernel:
fastboot flash boot boot.img
You will have root and custom recovery installed.
Guide 1: http://www.androidauthority.com/xperia-arc-s-lt18i-root-android-4-0-ics-80266/
Guide 2: http://forum.xda-developers.com/showthread.php?t=1653188

{Q} Help flashing P.A.C.man rom!

Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal

xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
After you flash the Rom reboot the phone and just let it fully boot. After that you can go back to CWM and flash the WiFi modules and other add-ons

You need to boot into the kernel's recovery and set it to jb mode or ics depending on your rom. Then make sure your rom and gapps don't exceed the system partition size, which it most likely did if you flashed the full gapps package as well.
The default recovery for the lupus jb kernel is TWRP, if you load into another CWM recovery it most likely did not flash to the correct partition arrangement that lupus kernel use therefore the rom can't boot.
Sent from XDA app

Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™

crazymonkey05 said:
Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...

xkeita said:
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...
Click to expand...
Click to collapse
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB

tallman43 said:
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB
Click to expand...
Click to collapse
I did what you said but it keeps bootlooping @[email protected]

Why don't u use turbo kernel and start the process again...and no is not normal to take out your memory card to enter boot menu
Sent from my R800i using xda app-developers app

Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...

xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
Cool:good:

xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Sent from my GT-I9300 On Official JB

@tallman43 thx for the help bro (Y)

wedgess said:
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Click to expand...
Click to collapse
I flashed the FTF with unlocked partitions played with the phone for about 30 secs, then flashed kernel, went to kernel menu then formated system, data, cache and davlik via CWM then flashed the rom, but that ended in bootloop, did the same with turbo kernel and it worked.

easy fix dont use Pac Rom its junk
xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
use slimbean !takes less room use it with lupus kerenel jb 480 rom.
---------- Post added at 02:49 PM ---------- Previous post was at 02:00 PM ----------
Just want to tell you that your kernels are by far the best. But the PAC man rom and the Paranoid hmm Dont work I cant get them to ever boot on my R800x CDMA
Keep up the hard work.

[Q] Looking for help unlocking bootloader or putting a ROM on Xperia Play

I have searched high and low, used many programs and the extent of my vocabulary on google to try and find a solution.
I figured it would be a good idea to ask rather than lifelong searching.
I just recently bought the Xperia Play because I am somewhat an avid gamer and love this phone.
After a while it gets annoying to be able to put only 4 apps on my SD card and a message popping up saying internal memory full, with 20+ gigs left on the SD card, Knowing in later android updates, most apps are allowed on the SD card, as well as holding home and killing recent apps.
I am looking to ROM my phone or unlock the bootloader, whatever is best.
My bootloader is locked, running 2.3.4 firmware on a Canadian rogers (under virgin on unlocked carrier/sim) R800a
If there are anymore specs needed, I would be happy to provide.

The build number is 4.0.2.A.0.42 if this helps.

Rayne-Malik said:
The build number is 4.0.2.A.0.42 if this helps.
Click to expand...
Click to collapse
Rooting. 42 is easy. You can use zerg rush method or with superoneclick.
Then install links2sd from market, uninstall unused system apps and move your apps to sd.
If you don't care about warranty, you can unlock your bootloader, install kernel that have 600MB instead of deafault 380MB data partition and install any rom you like.
Sent from my R800i using xda app-developers app

Thank you very much for the reply.
I'm ready to superoneclick but shouldn't I install Clockwork Recovery Mod?
I do not care about warranty as I bought the phone second hand anyways.

Rayne-Malik said:
Thank you very much for the reply.
I'm ready to superoneclick but shouldn't I install Clockwork Recovery Mod?
I do not care about warranty as I bought the phone second hand anyways.
Click to expand...
Click to collapse
Kernel and clockwork recovery is in same file, so once you flash kernel, you have recovery too.
My advice, since you don't care about warranty, is to do next:
-Root your phone first (so you can make backup with titanium backup or mybackuproot)
-Backup your apps and data (calls, sms...)
-Unlock your bootloader
-Find some rom from developer forum
-enter flashtool in flashboot mode, flash .79firmware (no need to boot into that firmware, just power off when it's finished)
-enter flashtool in fastboot mode, flash kernel that mached your rom (i recommend lupus gb v12 if your downloaded rom is gb, lupus ics/gb v7 (stock or cm version) for ics/gb roms or lupus jb v8 480p for jb roms.
-Enter recovery (power on, then keep pressing volume down/up or back button) (for lupus kernel is volume down)
-Flash your rom with "install zip from sd card"
Remember, jb roms won't boot on ics kernel, so if you got bootloop, most probably your rom does not match flashed kernel. Look in rom desription what kernel is compatible with it.
Sent from my R800i using xda app-developers app

I figured out a way to put CWM on it and that works fine, tested recovery on reboot.
I'm following up until the bootloader.
Now how will I unlock my bootloader?
My rooting status says bootloader unlock allowed: No

I have R800i so i can't help more, but check this guide:
http://forum.xda-developers.com/showthread.php?t=2187172
Sent from my R800i using xda app-developers app

Thank you very much, you have been a big help!
I'm just about done, Which rom would you recommend?
I'm currently looking at the Aurora Play.

Rayne-Malik said:
Thank you very much, you have been a big help!
I'm just about done, Which rom would you recommend?
I'm currently looking at the Aurora Play.
Click to expand...
Click to collapse
I'm glad i helped :highfive:
I can't recommend any rom, because there are so many good ones. And which ones...? GB, ICS, JB, CM7/9/10, MIUI, AOSP, Hybrid...
You better check roms here and find what you like.

So, I went with the Aurora Play ROM http://forum.xda-developers.com/showthread.php?t=2124442
And the turbo kernel http://forum.xda-developers.com/showthread.php?t=2187172
Step 1: put ROM on SD
2: Flash Kernel
3: Reboot into recovery
4: Wipe everything
5: Install ROM
I wouldn't say im in a boot loop but I can access recovery and it's not loading into the ROM
Would not installing, [Firmware] [GSM] R800i 4.0.2.A.0.58 or R800i_4.0.2.A.0.62_phoenixvendor.ftf have mattered?
Like the .79 firmware you mentioned, I did not do that.

Rayne-Malik said:
So, I went with the Aurora Play ROM http://forum.xda-developers.com/showthread.php?t=2124442
And the turbo kernel http://forum.xda-developers.com/showthread.php?t=2187172
Step 1: put ROM on SD
2: Flash Kernel
3: Reboot into recovery
4: Wipe everything
5: Install ROM
I wouldn't say im in a boot loop but I can access recovery and it's not loading into the ROM
Would not installing, [Firmware] [GSM] R800i 4.0.2.A.0.58 or R800i_4.0.2.A.0.62_phoenixvendor.ftf have mattered?
Like the .79 firmware you mentioned, I did not do that.
Click to expand...
Click to collapse
Latest firmware only matters if you want bigger data partition (600MB vs 380MB stock)
Did you set type of rom in turbo kernel? As i recall, there is an option in recovery to choose wich type of rom you are installing. And since you want Aurora play, you should choose stock-GB (it's been a long time since i used turbo kernel, i can't recall where exactly that option is)

Ok, I found that option and set it to GB stock ROM on slot 1. Still nothing though.
It boots up says Sony Turbo and then goes blank. The LED/backlight of the phone is still on though.
Should I choose something else other than Turbo?
EDIT: There are 2 options to set as stock GB, set both as stock and booted up just fine.
Now running Aurora Play, Thanks for all your help!

Xperia Play boot loops every time something is flashed via CWM

Hi, I've been having some problems with my Xperia Play getting stuck in a boot loop after flashing anything, or restoring a backup in CWM. This includes mods, like Adrenoboost, and the NXT Lockscreen, to themes. I have the Xperia Play R800x with an unlocked bootloader (via unlock code from Sony) and I'm using stock 2.3.3 Gingerbread, with the stock Kernel. I boot CWM by hotBooting LuPuS with Fastboot. I'm not really sure what to do because I really want to install these mods, and because restoring my nandroid backups also gets it stuck in a bootloop, I have to reflash the stock .ftf with FlashTool and reroot it every time.

x2110311x said:
Hi, I've been having some problems with my Xperia Play getting stuck in a boot loop after flashing anything, or restoring a backup in CWM. This includes mods, like Adrenoboost, and the NXT Lockscreen, to themes. I have the Xperia Play R800x with an unlocked bootloader (via unlock code from Sony) and I'm using stock 2.3.3 Gingerbread, with the stock Kernel. I boot CWM by hotBooting LuPuS with Fastboot. I'm not really sure what to do because I really want to install these mods, and because restoring my nandroid backups also gets it stuck in a bootloop, I have to reflash the stock .ftf with FlashTool and reroot it every time.
Click to expand...
Click to collapse
Hi. Not all mods are 100% compatible with stock ROM so you should use a custom one. Many custom ROMs are better than the stock one.

WhiteWashed said:
Hi. Not all mods are 100% compatible with stock ROM so you should use a custom one. Many custom ROMs are better than the stock one.
Click to expand...
Click to collapse
My only problem is, when I flash other ROMs they don't work, unless I also flash a custom Kernel. Anytime I flash a custom kernel, WiFi never connects, even if I flash the WiFi modules. It gets stuck at Obtaining IP Address, then stops.

x2110311x said:
My only problem is, when I flash other ROMs they don't work, unless I also flash a custom Kernel. Anytime I flash a custom kernel, WiFi never connects, even if I flash the WiFi modules. It gets stuck at Obtaining IP Address, then stops.
Click to expand...
Click to collapse
There's are some Gingerbread based roms that work also with the stock kernel and won't give you any problem with wifi (personal experience).
Try the gbx_play v3-rebuild here: http://forum.xda-developers.com/showthread.php?t=1897634
Or the Gin2kitkat here: http://forum.xda-developers.com/showthread.php?t=1631144
Try to flash one of these and let us know
Remember that before you flash a ROM you MUST make a wipe data/factory reset, wipe cache and wipe Dalvik Cache (in advanced options).

WhiteWashed said:
There's are some Gingerbread based roms that work also with the stock kernel and won't give you any problem with wifi (personal experience).
Try the gbx_play v3-rebuild here: http://forum.xda-developers.com/showthread.php?t=1897634
Or the Gin2kitkat here: http://forum.xda-developers.com/showthread.php?t=1631144
Try to flash one of these and let us know
Remember that before you flash a ROM you MUST make a wipe data/factory reset, wipe cache and wipe Dalvik Cache (in advanced options).
Click to expand...
Click to collapse
I do wipe the data and cache. I know how to install ROMs, I've done it with TWRP on my Kindle Fire, but I get stuck in a boot loop every time. I'll try these ROMs and see how they go.

WhiteWashed said:
There's are some Gingerbread based roms that work also with the stock kernel and won't give you any problem with wifi (personal experience).
Try the gbx_play v3-rebuild here: http://forum.xda-developers.com/showthread.php?t=1897634
Or the Gin2kitkat here: http://forum.xda-developers.com/showthread.php?t=1631144
Try to flash one of these and let us know
Remember that before you flash a ROM you MUST make a wipe data/factory reset, wipe cache and wipe Dalvik Cache (in advanced options).
Click to expand...
Click to collapse
I did a Factory Reset on CWM, then flashed Gin2KitKat, and wiped the cache and dalvik cache and it's stuck on the Android boot animation. It's been sitting there for like 10 minutes or so now. Flashtool does recognize it though.
Connected Device: R800
Installed version of busybox: BusyBox x1.21.1-Stericson (2013-09-26 14:33:26 BST) multi-call binary
Android Version: 2.3.7 / kernel version 2.6.32.9-perf / Build number: 4.0.2.A.0.79
Click to expand...
Click to collapse

It worked fine as soon as I hotBooted it with LuPus. I'm gonna try installing the other ROM I wanted and hotBooting LuPus

Strange, I have the opposite problem: lupus doesn't boot any ROM for me, excepting ICs ones.
In fact, to install a GB ROM I always have to flash first the stock rom and fw, and then flash the ROM with a custom recovery. Anyway by "hot booting" you mean custom recovery right?
Sent from my R800i using xda app-developers app

No, what I'm doing is using Fastboot to boot the phone with the kernel, without flashing it, to test it out. As soon as you shut the phone off, and turn it back on, it boots with whatever kernel is flashed on it
Sent from my R800x using xda app-developers app

x2110311x said:
No, what I'm doing is using Fastboot to boot the phone with the kernel, without flashing it, to test it out. As soon as you shut the phone off, and turn it back on, it boots with whatever kernel is flashed on it
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
That's what I mean with custom recovery :laugh: (don't confuse with custom kernel).

When I had stock kernel I would boot LuPuS just for CWM, but I'll hotboot kernels to see how well they run
Sent from my R800x using xda-developers app

x2110311x said:
When I had stock kernel I would boot LuPuS just for CWM, but I'll hotboot kernels to see how well they run
Sent from my R800x using xda-developers app
Click to expand...
Click to collapse
So here's what you need to do, since you want stock and and fastbootalot for recoveries y don't you download xperia play clockwork mod app? It's version 4 or something like that don't use xparts it don't work with our Verizon plays since you have root this will install recovery for you to flash Roms mods etc
I'll edit later with a link to the thread that has the clockwork mod app install that MAKE A NANDROID before you flash anything it helps worse case you hotboot lupus to restore your nandroid you have then reboot and guess what stock 2.3.3 Rom and kernel
Sent from my ADR6300 using xda app-developers app

No I got everything to work fine. I have LuPuS flashed on, and I'm using the xElite Gamer ROM with no problem.
Sent from my R800x using xda-developers app