Develop Bugs

[ROM] Cow ROM v7 (Bionic Cow 2)

Version 7 of Cow ROM: Bionic Cow 2.
- For arco68
It's basically an update to Bionic Cow using latest firmware from Sammy - I8150DXLC1. Features:
1) The OC kernel has been rewrote. It should be more stable and graphic score improved.
2) Bionic Scorpion Optimization library. Using NEON instructions for faster memory operations. Learned from arco68 github for ICS.
3) CowPanel 2 - use this util to configure VSYnc on/off. For speed, use VSync off. For smooth, use VSync on + triple buffering. Read more here. You also may configure zRam option here. zRam is off by default. Read more here.
4) Many CPU governors: Default using OnDemandX for best battery; 80% left in 24 hours. Use "Performance" for benchmarking.
5) More RAM - 358Mb available, compare to 351Mb in stock ROM.
6) Using a super light Zeam Launcher. Thanks cloakt for permission to use.
7) Internal / external sd card swap, CRT screen off effect, Low Memory Killer Tweaked, OnDemandX tweaked, Custom Bootup animation and Larger SD Card cache, Voice Search, etc.
8) Based on arco68 GB kernel. Without which, none of this is possible.
Special thanks to arco68, tch9, andynroid and pinkyunki, Murny Umairah, Myrule Anarki, Santos San Martin and Mohd Fazrin Daud from SGW group.
*WARNING*: Don't use OC ROM unless you know what you are doing. The ROM will automatically reset to 1.4ghz - OnDemandX after reboot as a safety precaution. I only set to 1.8ghz OC for short time during Cheat Engine hacks, zip / unzip, benchmark, etc. I always reset back to max 1.4ghz for normal used. I strongly recommend you to set a temperature profile if CPU ever get above 50C you should lower max clock back to 1.4ghz.
So, here is the link:
None Overclock:
Part 1: http://www.mediafire.com/?b0hcu82bpq9cu9n
Part 2: http://www.mediafire.com/?6qy19q4995g75w0
Overclock:
Part 1: http://www.mediafire.com/?7k7ei26n46e44bb
Part 2: http://www.mediafire.com/?e368mc427y19611
Here is how to install the ROM:
1. Enable recovery.
2. Use 7zip, right click on xxxx.001, extract. It will create the zip file required for flashing. Copy this zip into your phone. (Don't extract xxx.002)
3. Boot into ClockWorkMod / RZRecovery, backup your current ROM using nandroid (just in case).
4. If you are upgrading from my previous ROM;
- BEFORE installing the ROM, Uninstall CowPanel: Setting, Application, Cowpanel, uninstall
- Wipe Dalvik-cache. All your settings and app will remained. Theme will changed though.
5. If you are installing from stock or from other custom ROM, best to wipe everything using CWM, including your USB and external sd card. Reinstall everything from fresh, don't restore anything from Titanium Backup or anything.
Google Map? Missing apk? Original theme? If you want to restore to stock theme, get all the apk here.
Report Problem: If you encounter FC or any problem, please provide logcat so I may trace it:
1. Connect phone to USB
2. adb logcat > log.txt
3. In your phone, reproduce the crash / FC / etc
4. Kill all adb process in your PC
5. Zip and send me the log.txt
Update Radio Firmware
I8150DXLC1 comes with an updated Radio firmware. This should improve voice call quality. Check if you need to update this, go to Check "Setting", "About phone", "Baseband version". If you already have I8150DXLC1 or newer you dont need this. If not, use Odin to flash this. This will only update the Radio firmware, nothing else will change. You can do this before or after install Bionic Cow 2 ROM.
1. Get Odin.
2. Get ancora.ops.
3. Get radio firmware.
4. Boot into "download mode". Connect phone to PC. Start Odin
5. Select OPS file = ancora.ops. Select One Package = radio firmware, check "One package", "Auto reboot", "Protect OPS".
6. Start and wait till it complete.
Old Bionic 1
Non-oc:
Part 1: http://www.mediafire.com/?6994bk9qhxkde8w
Part 2: http://www.mediafire.com/download.php?gvc1j2da6c51u5a
- Refer to this guide on how to extract this. Thanks andynroid.
OC: (link fixed)
Part 1: http://www.mediafire.com/?cr5nc6zb1k5w0ye
Part 2: http://www.mediafire.com/download.php?u1xp01yr15saujw
Disclaimer: I am not responsible if you brick your phone I tried it, it work on my phone and a few others.

wow. downloading, will try and post feedback. did you add any languages? do you know a way to do so? thanks

cowithgun said:
This is my 6th ROM! It has all the benefit from all my previous ROM and more. Featuring Bionic Theme created specifically for this ROM! This ROM is a result from group of friends helping each other. Without it, it would be so bore and this ROM may never exist. Thanks pinkyunki, Murny Umairah, Myrule Anarki, andynroid and all the friends from our SGW group.
Click to expand...
Click to collapse
Awww Yeaaah! Just what i need! Hehehe what a coincidence when i said about theme-ing just now. Currently downloading your Bionic ROM!
Btw, is the scale-old-tv present in this ROM, Cow? HAHA! xDD

The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium

andynroid said:
The Six Million Dollar Man...This Is The Six Million ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks! I did spent more time on this ROM than in any other ROM.

andynroid said:
The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
You're one of the respected members in building this ROM, right? Wish i could be as great as you guys, developing something. Haih. :/

Downloading noww.!!!!xD
sent from another space

Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!

As now, i'm using your Bionic, Cow. Love the green-ish theme, seems smoothly smart!
A few things btw :
1. When booting up, there is still sound of the boot animation. How to disable it?
2. When locking the phone, the transition is somewhat like distortion-type, not like the scale-old-tv in your previous ROM. Is it supposed to be that way or my phone goes wrong?
3. The "3G icon" in status bar alternately goes from small to big and vice versa. Also is this meant to be as such? :/
Apart of those, it is indeed a GREAT and SUPERB ROM.
Sent from my GT-I8150 using xda premium

Arrgh at 58% DL.......Part-2....
CRT......The ROM is too fast for it to execute...
Sent from my GT-I8150 using xda premium....Using CWG V6 TestBuild

TuxBrothers said:
Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!
Click to expand...
Click to collapse
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium

This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )

Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium

MAMUTHcz said:
This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )
Click to expand...
Click to collapse
i would like my little brother try this rom but no italian.
Inviato dal mio GT-I9100 usando Tapatalk

andynroid said:
Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
it's 9:53 pm here in czech republic + I have night shift so no sleep for me right now

When im at home i will download and flash... Huhuhuh.
Sent from my GT-I8150

My Antutu none OC...
Sent from my GT-I8150 using xda premium

SyzwnFrzRdz said:
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
min speed ? ondemand or ondemandx ?

I must be dumb.
I download xxx.7z.001 and xxx.7z.002.
Right click on 001: extract here puts META-INF, data and system folders and the other files in the folders I am working in. If I right click and extract to GT-I8150-BIONIC it just puts those files in a folder. No sign of a flashable zip.
What am I doing wrong?
Bomoh, an user who doesn't have permission to post in Dev section yet, told me this solution and it's working. Thanks to him!
Extract 001 in a folder > select all the files > right click > 7-zip > add to archive.
In 7-zip window, change "Archive format" option from "7z" to "zip" then click OK.
Click to expand...
Click to collapse

Btw. This rom have portuguese on it?
Sent from my GT-I8150

[Q] Can't Overclock

Hello,
I have some Problem with my Phone. It's currently running Cyanogenmod 7.2 the latest Update. It's a A510e.
So, the Problem, when I want to Overclock my Phone over 600 MHz it will Freeze or Reboot in some Minutes after that. Is there any Problem that can solve it? Maybe another Kernel for CM7.2?
Thanks for your Help.

Cold Ice said:
Hello,
I have some Problem with my Phone. It's currently running Cyanogenmod 7.2 the latest Update. It's a A510e.
So, the Problem, when I want to Overclock my Phone over 600 MHz it will Freeze or Reboot in some Minutes after that. Is there any Problem that can solve it? Maybe another Kernel for CM7.2?
Thanks for your Help.
Click to expand...
Click to collapse
You not the only one mate I can't get mine to over clock above 600mhz but it's not really needed cm7 is nice and smooth anyway
Sent from my HTC Wildfire S using Tapatalk 2

eoghan2t7 said:
You not the only one mate I can't get mine to over clock above 600mhz but it's not really needed cm7 is nice and smooth anyway
Sent from my HTC Wildfire S using Tapatalk 2
Click to expand...
Click to collapse
So..isn't it be able to make a Overclockable Kernel for all WFS Models..or it is just hardcore to code?

U could try dust kernel by einstein.frat but he is banned Ap get the file by another xda member.......it can oc to 865 I use it on 825 and its quite stable but be sure to get v8.8 as it is better and more stable
Sent from my HTC Wildfire S A510e using Tapatalk 2

DarkDr0id said:
U could try dust kernel by einstein.frat but he is banned Ap get the file by another xda member.......it can oc to 865 I use it on 825 and its quite stable but be sure to get v8.8 as it is better and more stable
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
Already tried these with a 2.3.5 Sense Rom. Just freeze in the white htc Screen. Going back to CM 7.

Not all models of the wfs are overclockable sadly so it doesn't matter what kernel you use it won't work
Sent from my HTC Wildfire S A510e using XDA

bingzz, that's exactly what I want to know: why can't some HTC GSM phones be overclocked, when the rest can?? they have the same hardware, then why this ?? it's injustice!

sixth.insomniac said:
bingzz, that's exactly what I want to know: why can't some HTC GSM phones be overclocked, when the rest can?? they have the same hardware, then why this ?? it's injustice!
Click to expand...
Click to collapse
Well it's the same with computer CPU's, some CPU's can get to 5 Ghz some only to 4Ghz. You'll need a bit of luck.

had the same problem with my a510e but on sense rom figured out i was OC to high
and would cause my device to freeze or turn off by itself
try find some help here: http://forum.xda-developers.com/showthread.php?t=1494480&highlight=kernel+cm7
hope this helps

sharingan92 said:
had the same problem with my a510e but on sense rom figured out i was OC to high
and would cause my device to freeze or turn off by itself
try find some help here: http://forum.xda-developers.com/showthread.php?t=1494480&highlight=kernel+cm7
hope this helps
Click to expand...
Click to collapse
The thing is (at least in my case) I can't even set the values for CPU - even if I use the option "apply on boot" - when I set the CPU values the phone reboots in few seconds and the values are back to defaults - 600 Mhz.
Today I tried to flash the new WildChild ROM 1.5. (which is already overclocked to 768 Mhz), but I'm stucked at the white HTC screen - I guess it's because of the overclocking because other ROM's work just fine.
So as I take it, I was just unlucky and bought one bad piece and there is no way to solve this?

Born2B said:
The thing is (at least in my case) I can't even set the values for CPU - even if I use the option "apply on boot" - when I set the CPU values the phone reboots in few seconds and the values are back to defaults - 600 Mhz.
Today I tried to flash the new WildChild ROM 1.5. (which is already overclocked to 768 Mhz), but I'm stucked at the white HTC screen - I guess it's because of the overclocking because other ROM's work just fine.
So as I take it, I was just unlucky and bought one bad piece and there is no way to solve this?
Click to expand...
Click to collapse
I have this Problem too. At the moment there is no way to solve it, badly. To use OC Roms you can only Flash the default 600MHz HTC Kernel.

reflashing rom can often fix some issues but most likely a kernel problem
what are you using to set cpu e.g: nofrills etc??
did you wipe dalvik,cache,user data and whatever else is needed for you rom??
---------- Post added at 03:25 PM ---------- Previous post was at 03:19 PM ----------
try this rom:
http://forum.xda-developers.com/showthread.php?t=1503162
and post results had this running on my a510e just a week ago and it worked perfectly 787-245 ondemand is what i had mine set to

Born2B said:
The thing is (at least in my case) I can't even set the values for CPU - even if I use the option "apply on boot" - when I set the CPU values the phone reboots in few seconds and the values are back to defaults - 600 Mhz.
Today I tried to flash the new WildChild ROM 1.5. (which is already overclocked to 768 Mhz), but I'm stucked at the white HTC screen - I guess it's because of the overclocking because other ROM's work just fine.
So as I take it, I was just unlucky and bought one bad piece and there is no way to solve this?
Click to expand...
Click to collapse
Look, I face the same problem. But i can flash HenseMod. HenseMod is an OC rom...and it works...so why shouldn't wildchild.....there has GOT to be some method to get it working on our phones...
be posted on this thread that I've created...maybe someone mighthelp...http://androidforums.com/wildfire-s...27-wfs-cant-over-clock-stuck-boot-screen.html

have you followed these steps exactly how they say??
just flashed it to my A510e and its working fine
Prepare and partition your SDCard. (Folks seem to enjoy a FAT32 primary, a 1 GB ext4 (I use ext2), and a 512MB Linux Swap... in that order.)
Copy the WildChild ROM .zip file to your SDCard. Cool.
Reboot into Recovery mode.
Wipe data/factory reset. (Do it twice, especially if on CWM)
Wipe Dalvik cache. (twice, as above)
Choose "Install zip from SDCard".
(You might have to toggle Signature Verification until it is Disabled)
"Choose zip from SDCard" and select your WildChild ROM .zip file.
(read the splash screen and wait about 2 mins.)
Reboot phone; wait another 2-3 mins.
N.B. Starting with WildChild v1.5, two reboots is now normal and expected during the setup.
When lockscreen appears with your local carrier time, you may unlock phone and start using.
Enjoy! (...and throw a "Thanks" my way! )

I think the problem is that Wildchild is already overclocked to 768 mhz. If you also experience troubles overclocking your CPU in other ROMs try it and let me know if it works for you.
I followed the instructions carefully, tried to flash it several times with both odex and de-odex versions, but the results were the same, it didn't load at all. Just the white HTC screen.

Born2B said:
I think the problem is that Wildchild is already overclocked to 768 mhz. If you also experience troubles overclocking your CPU in other ROMs try it and let me know if it works for you.
I followed the instructions carefully, tried to flash it several times with both odex and de-odex versions, but the results were the same, it didn't load at all. Just the white HTC screen.
Click to expand...
Click to collapse
Ditto with my phone...and this has happened with all overclocked ROMs (mindhackers mostly)....I'm planning to sell my WFS and go for a MOTO Droid Razr Maxx...

tweak in franco r12 kernel??

hi I'm new to this forum and I just flash the franco kernel r12 from this link http://forum.xda-developers.com/showthread.php?t=1646883
I have done everything right and my phone was successfully booted but I can't see any tweaks as the thread referred? Or I have to set something up?

wasinjay said:
hi I'm new to this forum and I just flash the franco kernel r12 from this link http://forum.xda-developers.com/showthread.php?t=1646883
I have done everything right and my phone was successfully booted but I can't see any tweaks as the thread referred? Or I have to set something up?
Click to expand...
Click to collapse
Those tweaks are more like the "Under the bonnet tweaks". You won't see them, because it is internal stuff, thus not visible.

Oh Ok
Sent from my HTC One X using xda app-developers app

MIUI restarts

I installed miui 2.7.3 with all wipes and superwipe tool too.At pre settet up freq(768) my phone restarts.I setted to 600 but after 30 min of using restarts again...

Try the new version of miui rom v4 which is available in the development section.....flash the new version ...u ll have no problem with overclocking n other stuffs like data2sd:laugh:i myself had bugs with the wifi in the previous version of the rom...but the new version seems flawless:laugh::laugh::laugh::laugh:

same problem with last version(2.8.3).
where i can find others kernels for miui v4?
Sent from my HTC Wildfire S A510e using xda app-developers app

Try new miui 4............. Maybe the kernel is not overclockable.:fingers-crossed:

Same problem with the last build!!
Sent from my HTC Wildfire S A510e using xda app-developers app

edu_stoicescu said:
Same problem with the last build!!
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Which app r u using to overclock..........
I use voltage control.it runs smoothly wid out any problem.
Try flashing another kernel lik dust 9.0

Try using the deodexed version of the rom...enable the 2d rendering in the settings which can be found under the developer options..use no frills cpu for overclocking..set max freq to 787mhz and min freq to 120mhz and have smartassV2 governor and check the apply on boot option and have noop as the i/o scheduler..and hit apply...restart ur phone once manually...I think this will help...hit thanks if i helped you..

I tried with no frillz cpu and setted at 600 mhz max and 120 min.2d activated.same problem.now i am using eqdkp v5.1 and with 768 restarts but with 600 everything is fine.
Q:how can i verify the baseband ?

Neo_92 said:
Try using the deodexed version of the rom...enable the 2d rendering in the settings which can be found under the developer options..use no frills cpu for overclocking..set max freq to 787mhz and min freq to 120mhz and have smartassV2 governor and check the apply on boot option and have noop as the i/o scheduler..and hit apply...restart ur phone once manually...I think this will help...hit thanks if i helped you..
Click to expand...
Click to collapse
And you haved the same problem with mine ?

For me its working fine...at 787 max n 122 min....did u tried any other kernels like dust 9.0??.If not try it Here is the link.
http://forum.xda-developers.com/showthread.php?t=1618595..
I personally didnt tried this Kernel..Just try it n tell
I guess that may be your last chance..But i ll find any other possibilities to get rid of ur problem..Have ur fingers crossed bro..:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:

Neo_92 said:
For me its working fine...at 787 max n 122 min....did u tried any other kernels like dust 9.0??.If not try it Here is the link.
http://forum.xda-developers.com/showthread.php?t=1618595..
I personally didnt tried this Kernel..Just try it n tell
I guess that may be your last chance..But i ll find any other possibilities to get rid of ur problem..Have ur fingers crossed bro..:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Thanks but is only for gingerbread

Dust kernel is only for sense roms.You cannot use it on ics or cm7 based roms.

[Kernel] SuperSick for GSM & CDMA

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the SickleKernel for the HTC One V (primoc and primou). The source code has been modified to support both devices in a unified development environment. To assist in the development, simply checkout the source code, add a feature, test it and push the changes to my gerrit with the included gerrit script in the kernel's root. All changes will be reviewed and tested, and if the code is up to spec, will also be accepted. All contributions are greatly welcome.
The current goal of this kernel is to get the MSMFB from the jb_chocolate branch of CAF to boot fully on this device. Currently the goal of this project is to get past the black screen currently encountered so that we can have proper msm_fb drivers in jellybean and more easily port a 3.4 kernel. The current URL for the work (and booting caf drivers is here NOTE: Booting drivers means booting with a black screen.) We must properly initalize the panel of this device, but as soon as that is accomplished there will not be any problems with jellybean vsync.
Major Changes:
Code:
Add gerrit script to allow others to contribute to kernel code
compiled with cfx 3.8.1 toolchain
Fix Makefile flags so that kernel compiles on 4.8 GCC toolchains
Add google snappy
add -fno-pic flag for some compilers to fix wifi module
fix jb-4.2.2 no booting issue with MSMFB
Add XZ compression
patch to 3.0.67
Fix multitouch issue
Add cflags to optimize the code such as cortex9 and funloop
add primou board files
fix wakelock of bluetooth (caused bad battery life)
add new KGSL drivers for jellybean
fix compile warnings in 3.0.56 for gcc 4.6 (google prebuilt)
patch to 3.0.56
fix bluetooth in kernel
add overclock
fix warnings
Installation guide:
Use this awesome guide by the helpful cybervibin
How to compile:
1) download this tested toolchain
2) get kernel source here (Current branch is "jellybean-4.2")
3) put the toolchain in your $HOME directory
4) be sure your system has all the dependencies to build a kernel (system-devel, gcc, ect)
5) cd to the kernel source
6) issue the command `make ARCH=arm primoc_defconfig` NOTE: If building for gsm, primou_defconfig should be used
7) issue the command `make -j4 ARCH=arm CROSS_COMPILE=`echo "$HOME/prebuilts_gcc_linux-x86_arm_arm-eabi-4.8/bin/arm-eabi`"`
8) grab the kernel from arch/arm/boot/zImage and the modules from drivers/net/wireless/bcmdhd/bcmdhd.ko
9) create a boot.img with either mkbootimg and mkbootfs or android kitchen (Android kitchen is reccomended)
NOTE:
mkbootimg flags:
primoC base is 0x14300000 and ramdisk is 0x15300000
primoU base is 0x13f00000 and ramdisk is 0x14f00000
command line for both is console=ttyHSL0,115200,n8
Source:
here Current branch "jellybean-4.2"
Any bug reports should be posted here
Downloads:
Primoc V42 for 4.2.2 roms (ION) -> Here
MD5: fa0e631d340f06e67ebfeed5f2ed99f7
Primou V42 for 4.2.2 (PMEM) -> Here
MD5: d275623756c850b0936323d90292f9b4
Thanks:
maxwen
jmztaylor
synergy (CFX 4.8.1 toolchain)
lloir
tehwafflez (for buying me a wonderful bus pirate)
BeyondExistence

Great job simon!
Sent with my HTC One V+ with super slick jan 3rd kernel

Wafflez asked all the questions I'm wondering, lulz.
Let's see where this goes. :thumbup:
Sent from my HTC One V using Tapatalk 2

Tehwafflez said:
So just making sure here, is this kernel is for 4.0 or 4.1?
And it will not work with sense roms
So aka stock 4.0 or cm10/ pa/ akop right?
I am really looking forward to improved battery life and sleeker performance ^_^
Sent from my 4.1 PACman 15.3 with sick kernel 2.0.0 One V using xda app-developers app
Click to expand...
Click to collapse
when he said AOSP m guessing 4.1.X
its just a guess,
so simon whats new, i mean the changelog?

Improved for jellybean. I'm working on the commit for sysfs vsync and that will make us ready for 4.2.. video cam will be added eventually its just a matter of messing with it enough
Sent from my One V using Tapatalk 2

simonsimons34 said:
Improved for jellybean. I'm working on the commit for sysfs vsync and that will make us ready for 4.2.. video cam will be added eventually its just a matter of messing with it enough
Sent from my One V using Tapatalk 2
Click to expand...
Click to collapse
Ohhh I see..good luck
Sent from my One V using xda premium

version one released. Should be the same as sick kernel with a little better performance with lionheart governor
http://files.simonsickle.com/?dir=htc/primoc/kernels

How about Multi Touch fixes? One thing I noticed about Jelly Bean is that using 2 fingers cancels both touch gestures.
I play Minecraft on my One V, and when playing, I can't because I can barely move due to multi-touch not be liable.

Multi touch is in the ROM. Not the kernel drivers. The drivers have comments that state multi touch support exists
Sent from my One V using Tapatalk 2

I noticed it works fine in things like launchers, but not games. It cancels all touches.... Any ideas?
Sent from my HTC One V using Tapatalk 2

Contact that app developer
Sent from my One V using Tapatalk 2

I just went back to stock sense lol. Ill have to try it out next week with jmz rom
Sent from my HTC One V using xda app-developers app

I'll also be taking over CM10 for a bit. Jmz lent unlimited io his phone to get us all soff
Sent from my One V using Tapatalk 2

Curiousn00b said:
I noticed it works fine in things like launchers, but not games. It cancels all touches.... Any ideas?
Sent from my HTC One V using Tapatalk 2
Click to expand...
Click to collapse
if ur talking about JB, maybe cause its still in beta stage!
---------- Post added at 08:26 AM ---------- Previous post was at 08:25 AM ----------
simonsimons34 said:
I'll also be taking over CM10 for a bit. Jmz lent unlimited io his phone to get us all soff
Sent from my One V using Tapatalk 2
Click to expand...
Click to collapse
s-off ???? really?,yay!

cybervibin said:
s-off ???? really?,yay!
Click to expand...
Click to collapse
The guys there are amazing. It probably won't be long at all
Sent from my One V using Tapatalk 2

simonsimons34 said:
The guys there are amazing. It probably won't be long at all
Sent from my One V using Tapatalk 2
Click to expand...
Click to collapse
Woah who is Jmz working with to get us soff? I am looking forward to this and hopefully it won't be crazy tricky to get it either
Sent from my One V using xda app-developers app

he donated to unlimited.io there's no promises but these guys are good. Also team blueridge, which lloir me and kalaker belong to (I'm one of the two founders ) has found a hopeful method for one v CDMA. It is the same way as the wildfire s. We just need the proper diag bin... but back on track. Create a general thread else please
Sent from my One V using Tapatalk 2

cybervibin said:
if ur talking about JB, maybe cause its still in beta stage!
Click to expand...
Click to collapse
I always figured it was the kernel until Simon just taught me something. I can't use CM10 because of reboots and that touch glitch. That's all that keeps me away. xD
Sent from my HTC One V using Tapatalk 2

simonsimons34 said:
The guys there are amazing. It probably won't be long at all
Sent from my One V using Tapatalk 2
Click to expand...
Click to collapse
so i dont know if its just me but your links to download are not working it just reports that it has "problems loading page" if anyone has already gotten this kernel plz pm me with link so i can get hooked up really want to try this out thx

Its back again. Server issues earlier
Sent from my One V using Tapatalk 2