OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
Hey fellas, to lock my phone I use the pattern lock, but since yesterday every time I lock the phone with power button or sleeps itself after 2 minutes, it doesn't show me the 'draw pattern screen', just the regular 'slide to unlock'.
So, I go and set the pattern up again, and lock it, it shows the 'draw pattern screen' and only shows once, after I lock the phone again, it won't appear anymore.
I'm using CM6.1.1, obviously rooted phone.
Any help or suggestions? Moderators feel free to move this post to cyanogen's thread if needed. Don't know if this might be a problem of CM itself.
Did you enable any of the quick unlock settings in Cyanogenmod settings? I bet my breakfast (which I already ate, sorry) that its because you need to review those CM settings. In User Input or something or other.
Uncheck all of those settings (that enable quick unlock)
(besides those pattern locks are easily hacked -- with the right light and the right amount of grease from your finger anyone can see your "path to unlock" - Im just sayin!)
Sorry man, that quick unlock feature is definetly not checked, it's under "settings/cyanogenmod settings/input settings", quick unlock not checked.
U owe me a pancake lol.
I dont remember getting creative with locking and unlocking settings, the weirdest thing I did was to install a few themes to the phone. Imma try putting everything to default, and start from there.
I've experienced some unlock and lock issues with cm6 aswell. It seemed as if there are settings that conflict with eachother. What happened to me was I changed it to rotory unlock with lock set to immediately engage on screen off. After changing that it wouldn't lock but the screen would turn off. I had to set it to 1 second and then reboot then it would lock just fine.
Sent from my HTC Vision using XDA App
What surprises me is that it stopped working for some reason, because I've been using cm6.1.1 for a couple of weeks and worked perfectly..
Sent from my HTC Vision using XDA App
don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM
g_grey said:
don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM
Click to expand...
Click to collapse
Yeah, these settings are found under CM Settings->User Interface (down at the bottom). I don't think these will be the cause though, since the OP said he didn't really mess with any of the settings. Also, I don't think the settings would cause the "Slide to Unlock" screen to appear (the phone would simply turn the screen back on to whatever was last on, no pattern unlock, no lock screen).
Have you installed any new widgets or lockscreen apps recently? Out of curiosity, have you tried any of the other lock types just to see if they do the same thing (like PIN or password).
This has been annoying me lately but I don't know when it started. I'm running 5.1.1, using fingerprint lock (tried also with pin lock, same thing), with a 10 minute delay of locking after screen off. For some reason, in the lock screen I no longer have access to quick settings, even when the screen isn't pin/fingerprint locked (within the 10 minutes). Was this changed on purpose for "security purposes" and now even when you don't want the lock screen protected, you have no access to quick settings?
Is it just me? Or is that the way it's meant to be/has always been?
It seems like half the time when I unlock my phone (not using fingerprint), the lock screen won't be there. Is it based on a time-out feature? I'd like to have it there 100% of the time.
The phone isn't connected to any trusted networks or whatever HTC/android calls it that disables the lock screen.
Not sure all I know is when you use a password or fingerprint you can set how often you want it to lock
If you go into Settings then Security there are options for how long the screen is off before it automatically locks, it's set ridiculously high stock, at least for me. There is also an option in there to make the power button instantly lock, which is off by default. This drove me crazy too.
Currently I use PIN+fingerprint setup. I wonder if there is a way I can do this:
I turn off the screen using the power button (or the phone turns off after inactivity).
If I turn on the device in x minutes (or hours) using the power button, then the device shows lock screen. Then I just swipe the screen without having to type PIN.
Unlocking lock screen with fingerprint works well, but sometimes it is not very convenient. I cannot use fingerprint when I wear gloves for example. Of course I do know that under Security, there is an option of "Automatic lock", but this is not what I want because it does not show lockscreen at all for entered duration.
Is there any app that allows me to do this?
You can delay the security lock for up to 30 minutes I think in the settings.
larsdennert said:
You can delay the security lock for up to 30 minutes I think in the settings.
Click to expand...
Click to collapse
I already mentioned that. Under Security - Automatically lock, I can delay up to 50 minutes. But this disables lockscreen at all -- turning off then turning on using the power button yields NO LOCKSCREEN. It brings me back to the screen I was looking at. This is not I want, I want to delay password input but I want to have lockscreen, which I can swipe away.
No Idea?
Well there seems to be no solution I guess. Too bad.