Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
︻╦̴╦═━───━━━✺~CRISKELO THEME~✺━━━───━═╦̴╦︻
⇝CrisKelo Theme⇜
︻╦̴╦═━───━━━✺~CRISKELO MULTIROM~✺━━━───━═╦̴╦︻
No Bugs
IMPORTANT to Know
The OTA-Updater dont work on Z1 with D_Vovan_238 versions, all Updates only on XDA and Official CrisKelo page!
Locked Bootloader
Way 1.
You must install 4.4.4 with Root and CWM. If you don't come from 4.4.4 then
- Install Offical 4.4.4 Firmware. 6903 Firmware
- Root Your Device
- Install CWM
Copy my ROM on your Internal SD Card
Install My ROM with Wipe/Factory Reset
Reboot your Phone
enjoy
Locked Bootloader Root problems Flash >>Su Fix<<
Way 2.
Copy my ROM on your Internal SD Card
Install My ROM with Wipe/Factory Reset
Turn off your Phone and Flash The Stock [.108] Kernel
Reboot your Phone
enjoy
Locked Bootloader Root problems Flash >>Su Fix<<
Unlocked Bootloader
Copy my ROM on your Internal SD Card
Install My ROM with Wipe/Factory Reset
Flash Stock TFT Kernel >>Klick<< or choose Custom kernel in AROMA
Reboot your Phone
enjoy
⇩⇩⇩New Aroma Installer⇩⇩⇩
⇝CrisKelo ♚[AROMA]V3.0.8♚ DOWNLOAD LINK⇜
⇩⇩⇩Mega Cloud Mirror⇩⇩⇩
⇝CrisKelo ♚[AROMA]V3.0.8♚ DOWNLOAD LINK⇜
⇝Official Discussion-Thread⇜
⇩⇩⇩Old Versions⇩⇩⇩
⇝CrisKelo ♚[AROMA]V3.0.7♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.6♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.5♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.4♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.3♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.2♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.0.1♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚[AROMA]V3.00♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚Aroma2.7MR♚ DOWNLOAD LINK⇜
⇝CrisKelo ♚Aroma2.7S2♚ DOWNLOAD LINK⇜
Simplified Installation Instructions :
1) Download 2 zip installers, first kernel and second Aroma zips.
2) Flash Downloaded MultiBoot Kernel, Reboot in to MultiRom TWRP by tapping camera button after first vibration.
3) Run Aroma Installer WITH "INJECT MULTIROM AFTER INSTALLATION" FUNCTION ENABLED, AND CHOOSE TRINITY MULTIBOOT KERNEL INSIDE AROMA INSTALLER!
In the rest of options follow Aroma Installer wizard
4) Enjoy
⇝CrisKelo ♚V7.8.1♚ Rom DOWNLOAD LINK⇜
⇧⇧⇧All Modifications Aroma Installer!!!⇧⇧⇧
⇝CrisKelo Simplified MultiRom DOWNLOAD LINK⇜
Recovery Themes
All TWRP recovery themes and configurations will be applied automatically.
But you must apply the Philz recovery settings manually.
Go to Philz recovery settings, backup/restore settings, then choose restore theme and finally restore theme and settings.
Done, we have the best settings and recovery theme. The background will change acording with the kernel that you selected from AROMA INSTALLER
Some apps and xposed modules added.
All recoveries updated, including Nut dual recovery solution.
And that's all for locked bootloaders :?
Unlocked Bootloaders
MultiRom Installation Guide :
WARNING: Read and Follow my installation instructions! I'm not responsible for bad or inappropriate use of my works! You are installing it for your own risk. If you will correctly follow my instructions all will work good and you will don't need PC. Allways make nandroid backup, just incase.
Installation Procedure :
1)Download the latest AROMA INSTALLER and install it with full wipe, choosing the Trinity MultiBoot Kernel, without DATA RESRESTORE.
It will also install support for Rom and extract all necessary Files to /sdcard1/0-MultiRom folder .
2)Boot up the Android,connect to the internet and run multirom app.
Allow it root access , download and install all necessary files. When it finish, It Will Ask for reboot in recovery to complete installation, CHOOSE "NO".
IF YOU REBOOTED THAN REFLASH TRINITY MULTIBOOT KERNEL, from 0-MultiRom folder, DO NOT REBOOT WITHOUT REFLASHING KERNEL, OR IT WILL NOT BOOT !!!
In case IT NOT BOOT you must FASTBOOT FLASH BOOT BOOT.IMG with Windows command line, to bring your device life again.
3)Shutt down your device , than boot it in MultiRom TWRP Recovery by pressing camera button or rebooting in recovery with Philz recovery .
Go to /sdcard1/0-MultiRom folder and install :
Check the option "Inject MultiRom After Installation ", it must be ENABLED!
FLASH :
1)MultiROM-v30x-180115-UNOFFICIAL-honami.zip, do not REBOOT OR IT WILL NOT BOOT!
Check the option "Inject MultiRom After Installation ", it must be ENABLED!
Then you have two Kernel installers for flash :
2)LTrinityUltimateKernel_V3.2_by_D_Vovan_238.zip - by all buttons you will enter in Philz Recovery.
2)ULTrinityUltimateKernel_V3.2_by_D_Vovan_238.zip - you can enter MultiRom TWRP Recovery by camera button pressing.
4)And finally boot in to your New CrisKelo MultiRom V7.8!
5)Enjoy
For correct functionality of all secondary roms check MultiRom settings, Enable ADB must be enabled, otherwise you will always getting problems with your secondary Roms!
If some secondary Rom get stuck, sometimes it happens, will be impossible to boot nothing apart recoveries. Boot in to MultiRom TWRP and repeat step number 3) of my installation guide. Now MultiBoot is restored . Stucked secondary Rom will also not work, to restore it simply reflash Rom and optionally Gapps zip installers, DONE ALL RESTORED
You will also find init.d script zip installers in /sdcard1/0-MultiRom/MountingScripts folder.
There are 3 installers for mmcblk1p2, mmcblk1p3 and mmcblk1p4 mount. So you can use it for External Secondary Roms installation or like EXT4 storage
But first you must prtitionate your Micro SD Card with mini partition tool, than install script acording with your SDCard partitions.
You can even install external roms on USB OTG Disks, FAT32(vfat) formatted
You will also find MultiRom uninstaller zip in 0-MultiRom folder, if you want to remove it.
Remember ALWAYS REFLASH KERNEL After actions with MultiRom, like installing, reinstalling or uninstalling MultiRom !!!
This way you ensure that it will 100% boot up other time!
No need to Reflash Kernel after secondary rom installing
⇝CrisKelo MultiRom DOWNLOAD LINK⇜
︻╦̴╦═━───━━━✺~CRISKELO ROM~✺━━━───━═╦̴╦︻
First unofficial update for CrisKelo rom available for download.
Installer version 2.3.7 will update your ROM to unofficial 7.6.3a version.
My first AROMA INSTALLER V 2.4.7 Done
It will update your ROM to unofficial CrisKelo 7.6.7a version.
It's edited CrisKelo AROMA INSTALLER (I will spend very much time to make new like CrisKelo's)
LOCKED AND UNLOCKED BOOTLOADERS
INSTALLATION GUIDE :
1)Make NANDROID BACKUP of whole system (just incase), and later we will need data backup!
2)Reboot your phone to recovery.
3)Install the update choosing first option, with wiping all system. If you choose second option, customize your rom, NO ROM UPDATE, NO ANDROID PATCHES AND NO MODDED PLAYSTORE WILL BE INSTALLED.
4)Reboot in to recovery, and select costume restore and RESTORE ONLY DATA! IF YOU WILL RESTORE SYSTEM ALL CHANGES WILL BE ELIMINATED!!!
5)Finally boot in to android.
6)ENJOY FREEDOM
⇝OLD DOWNLOAD LINK⇜
♔CHANGELOG♚
AROMA v2.4.7 Unofficial CriskeloROM v7.6.7a
By D_Vovan_238
⇝ Aroma Installer Added
+ All Kernels Updated
+ Android Patches Added
+ Modded Playstore Added
+⇩ All Kernel Recoveries Updated⇩
⇝Ported from newest NUT Kernel⇜
+ Nut DualRecovery Solution Updated
+ Gps Configuration Added
+ Framework Animations Updated
+ SystemUI Icons Added
+ AOSP Stock Lockscreen added
+ DroidLogo Fonts Added
Click to expand...
Click to collapse
If you like my work please hit the thanks button
XDA:DevDB Information
CrisKelo MultiRom V7.8.1 LB&UB, ROM for the Sony Xperia Z1
Contributors
D_Vovan_238, f(x)THaxxorX, amarullz, Garcia98, Philz, TWRP Team, CWM Team, DoomLord, [NUT], rovo89, ChelpuS.
Source Code: criskelo.de.vu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Xperia Z 1: C6903 or C6902.
Based On: Sony Stock Rom
Version Information
Status: Stable
Current Stable Version: [AROMA]3.0.8
Stable Release Date: 2015-06-14
Current Beta Version: AROMA 2.7S
Beta Release Date: 2015-02-06
Created 2015-04-09
Last Updated 2017-04-14
Reserved
RESERVED
RESERVED
RESERVED2
RESERVED
Seems nice but wow it's a tad bit confusing
I know but try it, I'm sure you will like it
D_Vovan_238 said:
I know but try it, I'm sure you will like it
Click to expand...
Click to collapse
Hi mate good to see you here !
Hi glad to see you to
Now started new thread wright here
noahvt said:
Seems nice but wow it's a tad bit confusing
Click to expand...
Click to collapse
My Aroma Installer also use this method for Kernel splash image change
noahvt said:
Seems nice but wow it's a tad bit confusing
Click to expand...
Click to collapse
Please use less colors at instructions..
Sent by my Z1 with XDA Fax
Duvel999 said:
Please use less colors at instructions..
Sent by my Z1 with XDA Fax
Click to expand...
Click to collapse
Ok
D_Vovan_238 said:
Ok
Click to expand...
Click to collapse
I received an error during installation: cannot stat /system/build.prop no such file or directory
noahvt said:
I received an error during installation: cannot stat /system/build.prop no such file or directory
Click to expand...
Click to collapse
You wiped your system before run Aroma Installer.
That's because it happens, wipe your phone with Aroma, while old rom is on system,it will not wipe data/media/0!
I was not thinking about this
But otherwise my device verification will not work.
Like all good Roms CrisKelo must verify if it is installing on correct device, because if the device is incorrect, it will possibly bricked or worse, Hard Bricked
Try it this way if still don't work, save the Installation Log and send it to me, or post it
Aroma installer updated !
New version released
Enjoy
From criskelo.de.vu
From criskelo.de.vu
D_Vovan_238 said:
Now it's not Simplified Multirom Aroma Installer it's just Multirom Aroma Installer
To have Multiple Roms now simply flash my newest [Aroma2.7MR], with Trinity Ultimate MultiBoot Kernel, IN TWRP OR PHILZ RECOVERY, and enjoy all Multirom Features
Pretty soon will post newest Aroma Installer
Some bootanimations added also.
Click to expand...
Click to collapse
D_Vovan_238 said:
All tested and seems to work perfectly with ALL RECOVERIES.
And because now wee don't need to inject multirom after installation I reenabled Reboot Now Option after installation
Click to expand...
Click to collapse
Was uploading my work whole night, but got error
Now will go to work, but later will try other time
Take your time
Sent by my Z1 with XDA Fax
Im not beeing able to download the rom. i get "enter decryption key" on that site...
also i seem to have lost the recovery thing. pressing back button on restart does nothing any more. what is recommended to use here?
EDIT: i manage to install towel using dualrecovery...
But still missing the stable realease as i cant download i only got the full multipackage thing. dont know whats the difference here...
EDIT2: after chosing a bunch of stuff when installing rom and now restarting the phone is stuck with "SONY". what to do?
EDIT3: I manage to get it working again. flashtool etc. and finally i got the rom up running. So far so good.
But 1 quetion change i change the font on text? i find it a bit to fanzy and hard to read.
U5tabil said:
Im not beeing able to download the rom. i get "enter decryption key" on that site...
also i seem to have lost the recovery thing. pressing back button on restart does nothing any more. what is recommended to use here?
EDIT: i manage to install towel using dualrecovery...
But still missing the stable realease as i cant download i only got the full multipackage thing. dont know whats the difference here...
EDIT2: after chosing a bunch of stuff when installing rom and now restarting the phone is stuck with "SONY". what to do?
EDIT3: I manage to get it working again. flashtool etc. and finally i got the rom up running. So far so good.
But 1 quetion change i change the font on text? i find it a bit to fanzy and hard to read.
Click to expand...
Click to collapse
Sorry, was buissy, will fix it on next versions
For now only solution is wipe
Now preparing to new release, all details on criskelo.de.vu
Detected some unstable scenario, possibly 25% that it will happens, but it is almost fixed
That's why still not uploading new version
But is it possible to change font? Cause its hard for an old guy like me to read it
Cyanogen(mod) 11 by XperiaOverlay™(opensource)
XperiaOverlay™ Project Decided to Release the devices releated source code we use to build XperiaOverlay™
and build and test Cyanogen(mod) 11 ROM for Xperia S | Xperia ION | Xperia Acro S | Xperia SL
The ROM is stable for daily use
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it. Remember that you are choosing to make these modifications,
* we are not responsible for what you are doing with your device, and we don't take any
* responsibility of bricked devices or any sort of damage that may be caused by you.
*/
SOURCE Code contribution on Github :
- Device trees
- Kernel
- Proprietary Blobs
DOWNLOAD :
- cm-11-20150425-UNOFFICIAL-XperiaOverlay-aoba.zip (dirrect link)
CREDITS:
FreeXperia Project
Cyanogen(mod)
OpenSEMC Team
XDA Developers
SONY that made all this possible.
reserved
reserved 2
Achotjan said:
Cyanogen(mod) 11 by XperiaOverlay™(opensource)
XperiaOverlay™ Project Decided to Release the devices releated source code we use to build XperiaOverlay™
and build and test Cyanogen(mod) 11 ROM for Xperia S and Xperia ION
The ROM is stable for daily use
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it. Remember that you are choosing to make these modifications,
* we are not responsible for what you are doing with your device, and we don't take any
* responsibility of bricked devices or any sort of damage that may be caused by you.
*/
SOURCE Code contribution on Github :
- Device trees
- Kernel
- Proprietary Blobs
DOWNLOAD :
- cm-11-20150425-UNOFFICIAL-XperiaOverlay-aoba.zip (dirrect link)
CREDITS:
FreeXperia Project
Cyanogen(mod)
OpenSEMC Team
XDA Developers
SONY that made all this possible.
Click to expand...
Click to collapse
thank you for sharing this rom, so now ordinary flashing using CWM or TWRP will get the Job done ?
mouhaboo said:
thank you for sharing this rom, so now ordinary flashing using CWM or TWRP will get the Job done ?
Click to expand...
Click to collapse
Hi, you re welcome its a pleasur
yes you have to flash it with CWM or TWRP, reboot and flash gapps as usual,
the default recovery in kernel is the CM11 integreated CWM recovery
Thank you very much @Achotjan.
This is really a good news for our ion.
Will test and report.
@Achotjan finally u did some mercy upon poor xperia ion users ..u r damn awesome ...thanks..will flash and report in a while...
So I flashed it. Initial impression are very good. Will give a detailed review later.
And whoa!!! Total ram is 860mb. I mean I have never seen so much ram in ion. This is an awesome work.
@Achotjan thank you...this is good for our xperia ion
And also theirs xperia overlay rom for xperia ion - http://www.xperiaoverlay.com/xperia_ion_purchase.html
Thank you once again
I am damn impressed with this build. Really seems stable. Everything works. Animations are fine. Theme engine works. All good.
Now for few issues i faced till now
1. Uninstalling app from setting - check edit.
2. This is related to over clock. I don't like over clocking so I have kept Max freq to 1512 but even though CPU goes over 1512. Also phone gets warm on basic usage. I think this is related to over clocking.
EDIT - i figured it out that reboot while uninstalling is only for only cm11 theme while uninstalling all other apps works irrespective of where you uninstall from. So reboots only if you uninstall cm11 themes.
This is y i never wanna sell trade my ion...I guess I will keep it with me foreva...I am still tryna download the rom and in the middle i am getting connection error ..poor me??
Chocklety Boyee said:
This is y i never wanna sell trade my ion...I guess I will keep it with me foreva...I am still tryna download the rom and in the middle i am getting connection error ..poor me??
Click to expand...
Click to collapse
Haha..try with idm, surely it will work
Flashing steps
So I was on a custom rooted rom and the steps to flash this sweetheart is as follows: ( without using Flashtool )
1) Download the rom .zip file to your phone.
2) Extract the Boot.img file found in the zip you have downloaded and put it somewhere in your phone
3) Download and install Rashr which is a kernel flasher app on your phone
4)Open Rashr and Grant root permission when asked to.
5) In Rashr, Go for choose Kernel from storage option and choose the Boot.img file you have extracted from the rom .zip file and your device will reboot with the xperia overlay kernel.
6) When xperia overlay shows up press the volume down button multiple times to get in the CWM recovery already implemented in the xperia overlay kernel.
7) Wipe data factory reset
8) Wipe Cash partition
9) Install zip from sd card, choose the .zip rom file.
10) reboot and enjoy you new full of ram rom
note 1: in case you face error mounting sd card when trying to install the rom which is what happened to me, just go to the advanced otion in the recovery and choose fix permissions then reboot to recovery and everything will be allright.
note 2: according to what I just found out, you must follow these steps if you don't have a custom recovery installed.
in case you have CWM or TWRP recovery already installed then there is no need to flash the kernel, so you can skip steps 2-3-4-5-6
mouhaboo said:
So I was on a custom rooted rom and the steps to flash this sweetheart is as follows: ( without using Flashtool )
1) Download the rom .zip file to your phone.
2) Extract the Boot.img file found in the zip you have downloaded and put it somewhere in your phone
3) Download and install Rashr which is a kernel flasher app on your phone
4)Open Rashr and Grant root permission when asked to.
5) In Rashr, Go for choose Kernel from storage option and choose the Boot.img file you have extracted from the rom .zip file and your device will reboot with the xperia overlay kernel.
6) When xperia overlay shows up press the volume down button multiple times to get in the CWM recovery already implemented in the xperia overlay kernel.
7) Wipe data factory reset
8) Wipe Cash partition
9) Install zip from sd card, choose the .zip rom file.
10) reboot and enjoy you new full of ram rom
note: in case you face error mounting sd card when trying to install the rom which is what happened to me, just go to the advanced otion in the recovery and choose fix permissions then reboot to recovery and everything will be allright.
Click to expand...
Click to collapse
No need of following this in detail.
If you have custom recovery like twrp
Then just wipe data, cache, dalvik, system and flash the zip and reboot. That's it.
dhruvmu said:
No need of following this in detail.
If you have custom recovery like twrp
Then just wipe data, cache, dalvik, system and flash the zip and reboot. That's it.
Click to expand...
Click to collapse
this depends on what kernel you are using, if you are on another kernel, you have to flash the xperia overlay kernel before you go on with the flashing steps, anyway the steps are meant for people who are not much familiar with flashing custom roms
mouhaboo said:
this depends on what kernel you are using, if you are on another kernel, you have to flash the xperia overlay kernel before you go on with the flashing steps, anyway the steps are meant for people whom are not familiar with rom flashing
Click to expand...
Click to collapse
No bro. Thats not needed. The kernel is in the zip and it flashes with the ROM. So you only need a working custom recovery.
Ya agree with new users. But sometimes it confuses people.
another step by step guide including a video to flash the rom using flashtool can be found on this link
http://www.xperiaoverlay.com/wiki.html
---------- Post added at 11:34 AM ---------- Previous post was at 11:29 AM ----------
dhruvmu said:
No bro. Thats not needed. The kernel is in the zip and it flashes with the ROM. So you only need a working custom recovery.
Ya agree with new users. But sometimes it confuses people.
Click to expand...
Click to collapse
ok I did not realize the kernel will be flashed with the rom, is this a general rule ? as sometimes I try to flash a custom rom and get stuck with the old kernel and I flash the new one later with flashtool to get the rom to work.
mouhaboo said:
another step by step guide including a video to flash the rom using flashtool can be found on this link
http://www.xperiaoverlay.com/wiki.html
---------- Post added at 11:34 AM ---------- Previous post was at 11:29 AM ----------
ok I did not realize the kernel will be flashed with the rom, is this a general rule ? as sometimes I try to flash a custom rom and get stuck with the old kernel and I flash the new one later with flashtool to get the rom to work.
Click to expand...
Click to collapse
That's mostly with stock ROMs. They don't have kernel in it. You can check in any jb stock ROMs, you won't find any kernels in it.
dhruvmu said:
That's mostly with stock ROMs. They don't have kernel in it. You can check in any jb stock ROMs, you won't find any kernels in it.
Click to expand...
Click to collapse
ok now I got it, thanks for the explaination
@Achotjan
I have taken last_kmsg
Here is the link - www.pastebin.com/8sHVPWKR
Plz look in to this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Informations
Hey guys, today i will show DualBootPatcher one of the best apps for multi ROMs (i think this is the unique app for this ).
I have managed to support L3II, L5, L7 and L7II (Officially)
I am not the creator, just the supporter
XDA NEWS!!!
Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
Requirements
1. A Custom Recovery (TWRP or PhilZ Touch or the old CWM )
2. A KitKat ROM (Real KitKat ROM, not build.prop edited, a fake KK ROM)
3. The Dualboot Patcher - http://goo.gl/0bcbbN (Download the APK in Downloads Section)(For L3II, L5, L7 and L7II)
4. A KitKat ROM (To install )
Installation
1. Make a nandroid backup in case anything fails. (optional if you like playing with fire)
2. Install the DualbootPatcher
3. In the Patcher, go to the ROMs section, and a popup will ask you to set the kernel. Do it.
4. After this you need to go in menu (the tree dots) of Primary ROM and search for Update Ramdisk. Press it.
5. In the patcher, go to the Patch ZIP file section, open your ROM zip file
6. After this select in what partition you want to install:
Primary ROM Upgrade - To update ROM without affect the Secundary ROM (and others) when you have one installed.
Secundary - To install in /system.
MultiROM (1-3) - To install in /cache, you have 3 slots in this.
Data Slot - To install in /data (ID is IDentification of ROM)
Extsd slot - To install in your sdcard
7. You not need to change the Device
8. Do the same for GAPPS (optional)
9. Press in confirmation button and wait.
You have two options here:
9. Go to ROMs section and press in button of a device with arrow inside, select the patched zip files (ROM and GAPPS), and by last press in confirmation button, just wait..
10. After finish, close the app (see Know Issues), open and go again to ROMs section and you will see the default ROM to boot (the last installed). Reboot your phone.
11. It will now boot onto your ROM installed, once you've completed your first boot setup, install the DualBootPatcher.
or
9. Restart in recovery, flash the patched zip files (ROM and GAPPS). Restart your phone.
10. It will now boot onto your ROM installed, once you've completed your first boot setup, install the DualBootPatcher.
You are now able to select which rom to boot from the ROMs section. Once you've selected which rom is the default, restart your phone. Voilà!
Know Issues
- The ROMs section sometimes bug and get a infinite refresh, close the app and open app again.
- Never use this in JellyBean 4.1 or "You are gonna have a bad time"
- Contact me
Special Thanks
@chenxiaolong for the awesome DualBootPatcher.
@virulentt for him original thread for tutorial (and encouragement)
@Jonas Cardoso for testing in L5
@WinterR for testing in L7
@ECr34T1v3 for testing in L3II
ScreeShots
Thanks for the mention
@WinterR test the unofficial snapshot, please
What about different kernel and not the one from rom's zip? Better to add them to zip before patch or can be installed later by patching kernel's zip?
Or there can be only one kernel for all roms?
Sent using XT1562 - stock 5.1.1
ch3mn3y said:
What about different kernel and not the one from rom's zip? Better to add them to zip before patch or can be installed later by patching kernel's zip?
Or there can be only one kernel for all roms?
Sent using XT1562 - stock 5.1.1
Click to expand...
Click to collapse
For kernels you need to flash two times, first flash with patched zip (in app) and second flash you need to set the ROM and flash again (via recovery).
The first will update modules (/system) and second is to update the boot.img
Note: Ever you change kernel you need to go to app and set the kernel to save you new boot.img
Now DualBootPatcher supports the L7 and L7II!!!
I got some time and would like to check it out.
I can only use 4.4.4 roms (on L7 there are no newer ones)?
How it works with sdext? Is it used as both /system and /data? Or just /system? But than where is nonprimary rom /data located?
PS. What file systems are supported by app? Or maybe it depends on kernel?
@ch3mn3y you can use all ROMs up to 4.2, because SELinux and other core things like storage/emulated/0.
The SdExt only store system.img, and only system (for now, the patch is under progress all time).
You have option to put 1 in /system (dual), 3 in /cache (multi-slot), and unlimited in /data and /sdext (External Card).
Support F2FS and Ext4, auto-detect, just need support in your ROM and all will works (not tested because no F2FS support for mine device )
If I can ask: where /data goes? I mean /data/app, /data/data, etc., not /data/media)?
So I tried to mod cyanhacker 2.0 to work from extsd, but app FC's at 1.4%. Tried last 8.0.0. Anyone know which one works with our device or this rom (don't know which one cause FC)?
ch3mn3y said:
So I tried to mod cyanhacker 2.0 to work from extsd, but app FC's at 1.4%. Tried last 8.0.0. Anyone know which one works with our device or this rom (don't know which one cause FC)?
Click to expand...
Click to collapse
The rom is stored in any partition in a folder called "multiboot", try other rom or old app versions.
Enviado de meu E435 (L3 II Dual) usando Tapatalk
I used this: DualBootPatcher-8.0.0.r2115.g279e1b2-win32.zip (last build from 09.01.2016). It patched the file (older ones couldn't open the archive). Now i will try to flash it on my device and than i will probably use app from the same build (DualBootPatcherAndroid-8.0.0.r2102.gd35e5db-snapshot.apk).
Naah, i use newest app. Zips can be edited on Windows machine.
Small request: any chance to move /cache and /data to the same folder as /system? Or at least /data (as /cache is more temporary) as it can become big for one rom and we have less than 3GB of space on this partition...
Sent using XT1562 - stock 6.0 (retasia DualSim)
---------- Post added at 02:03 PM ---------- Previous post was at 01:55 PM ----------
Bug?
After reboot from extsd rom back to primary, app on ptimary doesnt find sdext rom. I can only choose primary one.
Only change on sdext rom I did is installation of app...
Sent using P700 - Mahdi-Rom/SKernel
Check in external card the multiboot folder.
This app have a lot of bugs, use the zip in DualBootPatcher site, for cat the logs, and we can see if something goes wrong and report a bug.
Enviado de meu E435 (L3 II Dual) usando Tapatalk
Its ok. After 2 reboots of primary rom, sdext one is back and after next two reboots between roms its still there. Dont know what was wrong, but right now i suppose there wont be any useful info in logs.
Downloaded the logs zip, so next time will use it.
It works really fast from class 4 sdcard. However I thought that extsd is 2 partition and created one
Sent using P700 - Mahdi-Rom/SKernel
Thread closed as per OP request.
-XDA Staff
Build Number : A3000_A442_kupyxa4444_1.0.f
Creator : kupyxa4444
Files for recovery / firmware images
OS: 4.4.2
Kernel: 3.4.67
Only version A3000-H
languages: multilanguage
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Carefully read the entire message in order to avoid unnecessary questions
Features Firmware:
-It`s realy ANDROID 4.4.2 and kernel version 3.4.67
-Increase The sound on the speakers
-Improved Shooting main camera lenses work
-Two Desktops . Standard android and LENOVO
-Root
-Play Market
-By Default landscape view. The use of the portrait view has not been resolved .
-Standard Camera application thinks that the main camera 1MP , use SnapCamera
Install:
If you have one of my ROMS (A3000_A421_kupyxa4444 _ & _ luckasfb_1.3 or later), you can flash this ROM by recovery. Be sure to do before flashing WIPE
Method: reboot in recovery. Press the install, choose the sdcard, choose from the list of firmware previously downloaded and throw in the root of the memory card. Waiting for the end of the installation. Well now you can reboot the system and enjoy what we are fine))
*
In the version for Flash Tool there are different options of partitions (DATA Size / Device Memory). Use this option at your own risk! Before flashing through FT is necessary to make backup NVRAM using MTK_droid_tools (There are complete). If the firmware on any other firmware using by the Flash tool you will need to format the device!
Unzip the firmware, run the FT from the folder to copy the required markup option target_bin folder, select a scatter, flash button Firmware / upgrade.
2.5_16 have errors. Use it:View attachment 2.5_16.rar
DOWNLOAD
For Flash Tool
For Recovery
Patch for using SD-card as Int. memory
If you have errors "come.android.phone" - flash it by recovery:View attachment DAM_patch.zip
source code
More my Roms, or another Roms you can find here
P.S.: I don`t follow this topic
Exciting!
A 4.4 ROM with camera working!! Thanks bro!:highfive:
I haven't try it though, because I want to ask
Do ART mode and external SD card work fine?
I read your description but didn't find sentence mentioning these issues.
Good,!!
Thanks kupyxa4444,:good:
finally I've kitkat in my A3000-H tab.
i flashed the rom and am using it,everything works fine.
fareal7 said:
Thanks kupyxa4444,:good:
finally I've kitkat in my A3000-H tab.
i flashed the rom and am using it,everything works fine.
Click to expand...
Click to collapse
Including ART?
great rom....thanks
Great news! This tablet is still alive
@kupyxa4444 Could you put the recovery which can be used to flash ROM? Because links from this topic - http://forum.xda-developers.com/len...nt/recovery-teamwin-recovery-project-t2796069 are dead
kupyxa4444 said:
Build Number : A3000_A442_kupyxa4444_1.0.f
Creator : kupyxa4444
Files for recovery / firmware images
OS: 4.4.2
Kernel: 3.4.67
Only version A3000-H
languages: multilanguage
Click to expand...
Click to collapse
please i need a tutorial video because i followed the instruction but didn't success
MohamadMaklad said:
please i need a tutorial video because i followed the instruction but didn't success
Click to expand...
Click to collapse
use spflashtool version.that's easy
guide
http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135
which file i should choose in flash as MAP there is 5 of them
Hello! I need a Deodexed rom for our Lenovo A3000-H? My build number is A3000_A422_009_020_131112_WW_CALL_FUSE. I badly need it bro. Thanks!
Hello,
I flashed the ROM about a week ago, it works great but I have some questions:
When I plug in the charger to powered-off tablet, it shows glitched battery icon and then freezes. If I try to start the system it freezes on boot animation. I think it's because of the logo.bin (I'm not good at android development) which has 3 megabytes in this ROM, in any other ROM it has 300kb.. Also when I open it with LogoBuilder 1.6 and compile with the same images it has 300kb, not 3mb. Can I just flash the smaller logo.bin into existing ROM?
Can you explain me what exactly means the 2.5_4 scatter file? I flashed it and now I have 2gb system partition and only 480mb emmc partition! When I flashed with 8_16 file, the flasher showed "not enough space" error. I have A3000-H device which I think has 16GB of flash, I have only 2.5 available!
When I open the camera in Facebook Messenger app, it just closes. Can I fix it in any way? This is not very important, just a good feature which I can't use...
I think any other parts of the ROM are working... Very thank you for this great ROM! :laugh:
Thanks in advance
God ROM . camera not quality please fix camera
broken archive does not work
"If you have errors "come.android.phone" - flash it by recoveryAM_patch.zip"
broken archive does not work
@kupyxa4444
great work but your bootanimation really sucks ...btw that sound also sucks
Cannot install properly.
After installing.
In reboot option displaying " no OS installed"
Ok, I have recovery I am able to unbrick my device.
But I want to install this time what is not happening.
Please help.
MD5 for not found??
Sorry, wrong topic, delete it please
kupyxa4444 said:
Build Number : A3000_A442_kupyxa4444_1.0.f
Creator : kupyxa4444
Files for recovery / firmware images
OS: 4.4.2
Kernel: 3.4.67
Only version A3000-H
languages: multilanguage
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
SCREENSHOTS
View attachment 3699835View attachment 3699836View attachment 3699837
Carefully read the entire message in order to avoid unnecessary questions
Features Firmware:
-It`s realy ANDROID 4.4.2 and kernel version 3.4.67
-Increase The sound on the speakers
-Improved Shooting main camera lenses work
-Two Desktops . Standard android and LENOVO
-Root
-Play Market
-By Default landscape view. The use of the portrait view has not been resolved .
-Standard Camera application thinks that the main camera 1MP , use SnapCamera
Install:
If you have one of my ROMS (A3000_A421_kupyxa4444 _ & _ luckasfb_1.3 or later), you can flash this ROM by recovery. Be sure to do before flashing WIPE
Method: reboot in recovery. Press the install, choose the sdcard, choose from the list of firmware previously downloaded and throw in the root of the memory card. Waiting for the end of the installation. Well now you can reboot the system and enjoy what we are fine))
*
In the version for Flash Tool there are different options of partitions (DATA Size / Device Memory). Use this option at your own risk! Before flashing through FT is necessary to make backup NVRAM using MTK_droid_tools (There are complete). If the firmware on any other firmware using by the Flash tool you will need to format the device!
Unzip the firmware, run the FT from the folder to copy the required markup option target_bin folder, select a scatter, flash button Firmware / upgrade.
2.5_16 have errors. Use it:View attachment 3699838
DOWNLOAD
For Flash Tool
For Recovery
Patch for using SD-card as Int. memory
If you have errors "come.android.phone" - flash it by recovery:View attachment 3699839
source code
More my Roms, or another Roms you can find here
P.S.: I don`t follow this topic
Click to expand...
Click to collapse
Hello bro how can I develop mine special ROM with higher android version for any device + are there is a new version for lenpvo idea tab a3000h+ what courses I need to learn to develop on ROMs please answer and thanks
you need a ubuntu server and a device tree, this is why nobody makes a3000 roms, bcs of DEVICE TREE
is taht only me realize that the touch are delay and not smooth?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S22 S901B
Download & Guide:
1. Unlock your bootloader.
2. Downloads for S22: AFH: r0s twrp and kernel / Drive: r0s twrp and kernel
3. Reboot to download mode
4. Put the TWRP TAR for your device with Odin in the AP slot, vbmeta_disabled_R.tar in USERDATA slot and click start.
5. Reboot to recovery via recovery key combo (Vol up + power + USB connected).
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.- Type: multidisabler again. will see - Finished. when done.- Go back to Wipe > Format Data > type yes.- Reboot to recovery.7. Flash custom kernel and magisk apk in twrp.
8. Reboot to system, Enjoy.
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@ianmacd for multidisabler
@Dan_FFM (David Dean) for helping with convert readonly f2fs vendor to readwrite
Donators
Sources:
Kernel tree
Device tree
Changelog:
GitHub History
Note1: You need a custom permissive kernel to boot with R/W vendor.
Note2: If you got bootloop on Samsung logo, reboot to TWRP and wipe metadata from Advanced Wipe section.
Hi, thank you for twrp. Can this make system R/W ? I need to modify some files in system image. Thanks
NaiimAb10 said:
Hi, thank you for twrp. Can this make system R/W ? I need to modify some files in system image. Thanks
Click to expand...
Click to collapse
Not yet, still need a lot of work
Can S22 with 8GEN1 use this TWRP ？
sinaamos said:
Can S22 with 8GEN1 use this TWRP ？
Click to expand...
Click to collapse
Check OP there is supported list, also you know 8gen1 is snapdragon and the title says exynos and you still asking if it works?
Check the othe snapdragon thread.
Step 4 fails for me because of Knox Guard. Custom binaries blocked.
There is no way around this right?
Hi, noob question here...
Can I update firmware and retain root and TWRP without losing data? If yes - how to do it?
Worked perfectly with given guide!
1. TWRP recovery running
2. Could flash custom kernel from afaneh92
3. Also I downloaded Kernel tree and used build_menu to compile the same kernel with arch/arm64/configs/afaneh_r0s_defconfig
4. Could flash custom kernel self compiled as mentioned from (3.)
Next step was to adjust the defconfig from afaneh92 with some other features, but everytime I stuck in bootloop if I try. My approach was the following:
1. Load env variables from build_menu
2. make menuconfig load afaneh_r0s_defconfig
3. activate features from =n to =y (i.e. CONFIG_IP_VS=y)
4. copy newly created .config settings into afaneh_r0s_defconfig
5. start build_menu -> build kernel -> r0s
6. make flashable zip
7. boot into TWRP recovery and install custom kernel
8. Result: stuck in bootloop
my config still has CONFIG_SECURITY_ALWAYS_PERMISSIVE=y
Is this the right approach to add features to my kernel, or I am totally wrong with this? Here are some features I need for my kernel:
BLK_CGROUPDUMMYBLK_DEV_THROTTLINGEXT3_FS_POSIX_ACLBRIDGEIP_VSBRIDGE_NETFILTERIP_VS_NFCTVLAN_8021QIP_VS_PROTO_TCPBRIDGE_VLAN_FILTERINGIP_VS_PROTO_UDPBTRFS_FSIP_VS_RRBTRFS_FS_POSIX_ACLIPC_NSCFQ_GROUP_IOSCHEDNET_L3_MASTER_DEVHUGETLBFSIPVLANCGROUP_HUGETLBMACVLANCGROUP_NET_PRIONETFILTER_XT_MATCH_ADDRTYPECGROUP_PERFNETFILTER_XT_MATCH_IPVSDM_THIN_PROVISIONINGSECURITY_APPARMORVXLANUSER_NS
lowowly said:
Worked perfectly with given guide!
1. TWRP recovery running
2. Could flash custom kernel from afaneh92
3. Also I downloaded Kernel tree and used build_menu to compile the same kernel with arch/arm64/configs/afaneh_r0s_defconfig
4. Could flash custom kernel self compiled as mentioned from (3.)
Next step was to adjust the defconfig from afaneh92 with some other features, but everytime I stuck in bootloop if I try. My approach was the following:
1. Load env variables from build_menu
2. make menuconfig load afaneh_r0s_defconfig
3. activate features from =n to =y (i.e. CONFIG_IP_VS=y)
4. copy newly created .config settings into afaneh_r0s_defconfig
5. start build_menu -> build kernel -> r0s
6. make flashable zip
7. boot into TWRP recovery and install custom kernel
8. Result: stuck in bootloop
my config still has CONFIG_SECURITY_ALWAYS_PERMISSIVE=y
Is this the right approach to add features to my kernel, or I am totally wrong with this? Here are some features I need for my kernel:
BLK_CGROUPDUMMYBLK_DEV_THROTTLINGEXT3_FS_POSIX_ACLBRIDGEIP_VSBRIDGE_NETFILTERIP_VS_NFCTVLAN_8021QIP_VS_PROTO_TCPBRIDGE_VLAN_FILTERINGIP_VS_PROTO_UDPBTRFS_FSIP_VS_RRBTRFS_FS_POSIX_ACLIPC_NSCFQ_GROUP_IOSCHEDNET_L3_MASTER_DEVHUGETLBFSIPVLANCGROUP_HUGETLBMACVLANCGROUP_NET_PRIONETFILTER_XT_MATCH_ADDRTYPECGROUP_PERFNETFILTER_XT_MATCH_IPVSDM_THIN_PROVISIONINGSECURITY_APPARMORVXLANUSER_NS
Click to expand...
Click to collapse
you can simply edit afaneh_r0s_defconfig
I did. I.e. I changed
# CONFIG_IP_VS is not set
to
CONFIG_IP_VS=y
then compiled, flashed and tried to boot into system but stuck in bootloop.
I started to create the config with menuconfig because sometimes activating some of the CONFIG_ features additionally dependencies come in place or are not even available to activate.
Like activating CONFIG_IP_VS with menuconfig result in following:
CONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
Or if you want to use CONFIG_BRIDGE_VLAN_FILTERING you first need to activate CONFIG_VLAN_8021Q because of the dependencie.
So I thought doing with menuconfig is the "saver" solution. But anyway, got the same problem.
lowowly said:
I did. I.e. I changed
# CONFIG_IP_VS is not set
to
CONFIG_IP_VS=y
then compiled, flashed and tried to boot into system but stuck in bootloop.
I started to create the config with menuconfig because sometimes activating some of the CONFIG_ features additionally dependencies come in place or are not even available to activate.
Like activating CONFIG_IP_VS with menuconfig result in following:
CONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
Or if you want to use CONFIG_BRIDGE_VLAN_FILTERING you first need to activate CONFIG_VLAN_8021Q because of the dependencie.
So I thought doing with menuconfig is the "saver" solution. But anyway, got the same problem.
Click to expand...
Click to collapse
Anyway this is twrp thread, and I don't support kernel edit, mine is stock permissive
Thank you so far. Then I need some help in kernel edit. I start a new topic in questions section.
I'm getting bootloops on Android 13 BWA2, ADB doesn't work either. There's no possibility to install ROMs since the data partition is wiped when you flash TWRP and you can't copy files from windows to the device because it's not recognized.
neo2k12 said:
I'm getting bootloops on Android 13 BWA2, ADB doesn't work either. There's no possibility to install ROMs since the data partition is wiped when you flash TWRP and you can't copy files from windows to the device because it's not recognized.
Click to expand...
Click to collapse
You flashed the kernel!
afaneh92 said:
You flashed the kernel!
Click to expand...
Click to collapse
How am I supposed to flash the kernel if I can't get the zip file on my phone? Can you provide a tar file to be flashable in Download mode?
Will your TWRP be compatible with the new S23 series?
Well done. Flashed this image on four S22 phones, no problem. Fifth, my own - well, as mentioned on Telegram channel, I forgot to flash multidisabler. Wouldn't be a problem, but as I already setup the phone and moved over 180GB in it, I would like to query wheter it would be possible to support Samsung encryption. I am not demanding, so please don't be mad - just asking for possibility. Would be nice to have feature. While I can backup my data using migrate, I still prefer NAND backups.
neo2k12 said:
How am I supposed to flash the kernel if I can't get the zip file on my phone? Can you provide a tar file to be flashable in Download mode?
Click to expand...
Click to collapse
plugin flash drive. Mount as OTG. Problem solved