Hi I had PACman 19.3 on my One V (primou) when I saw the 20.1 update I decided to download it after I downloaded it I flashed the boot.img inside the zip file and then I installed the zip from my sd card but when I rebooted the phone it is stuck on the HTC bootscreen with the "This build is for development purposes only" stuff. Could any one help me out?
Thanks in Advance
ejignacio said:
Hi I had PACman 19.3 on my One V (primou) when I saw the 20.1 update I decided to download it after I downloaded it I flashed the boot.img inside the zip file and then I installed the zip from my sd card but when I rebooted the phone it is stuck on the HTC bootscreen with the "This build is for development purposes only" stuff. Could any one help me out?
Thanks in Advance
Click to expand...
Click to collapse
the 20.1 wont boot for any of us......until its booting i suggest you move bck to 19.3
Oh Yeah!
Sabbit said:
the 20.1 wont boot for any of us......until its booting i suggest you move bck to 19.3
Click to expand...
Click to collapse
I succesfully booted it I flashed Maxwen's HellBoy Kernel then installed PACman from SD:laugh:
ejignacio said:
I succesfully booted it I flashed Maxwen's HellBoy Kernel then installed PACman from SD:laugh:
Click to expand...
Click to collapse
yeah it boots with maxwens kernel but theres no mobile data connection
Sabbit said:
yeah it boots with maxwens kernel but theres no mobile data connection
Click to expand...
Click to collapse
Do you know of any fully functioning roms like PACman?
ejignacio said:
Do you know of any fully functioning roms like PACman?
Click to expand...
Click to collapse
by fully functional you mean?
i am on Slim Bean by Lloir.....a must try!
OR paranoid android 2.99 by 1ceb0x
Sent from my HTC One V using xda app-developers app
Kernel
Another question,so I tried to go back to he 19.3 rom but I forgot the kernel that was used,what was it again?
Hellboy
Related
First of all, this is NOT my work. I was looking for JB Animations for my HOX when I stumbled upon the following thread.
http://forum.xda-developers.com/showthread.php?p=28464573
Please give thanks to the original creator of the zip.
WARNING: If you're on ARHD, please proceed at your own risk. Some users reported that it's not working on ARHD and some even ended in bootloops. That said, I tested this on ARHD 9.0.0 and it's working fine with no FCs or bootloops. My advice is not to flash the mod in the same session as the ROM if you're doing a fresh install and not to forget Step 4 in instructions. Wiping cache & dalvik also wouldn't hurt though I doubt that's the problem.
Instructions (IMPORTANT):
1. Download the "JB_ANIMS_fixed.zip" from the link above.
2. Copy it to SD card.
3. Reboot into recovery.
4. Go to "Mounts and storage" and "mount /system". (I think we need this 'cause the creator of this mod forgot to mount the system partition in his install script.)
5. Now flash the zip.
6. Reboot and enjoy JB animations!
NOTE: This mod is supposed to work with any ICS ROM. I personally tested it on ViperX 2.0.1 with Sense 4.1. Also, the mod, which I think uses the villain theme system, replaces only select files inside framework-res.apk, not the whole file, so it should work with a modded framework-res.apk too.
JB Animations on SGS III (not my video):
have been looking for this as well! thanks :good:
any problems on your phone after using this?
anyone tried this on 2.17 base roms??
krohme said:
have been looking for this as well! thanks :good:
any problems on your phone after using this?
anyone tried this on 2.17 base roms??
Click to expand...
Click to collapse
Everything seems to be working fine for me. All the tweaks work also. ViperX 2.0.1 is 2.17 base in case you didn't know
not working with android revolution HD 9.1
downloaded, installing it asap...
thanks
edit: Working....
shavinda34 said:
not working with android revolution HD 9.1
Click to expand...
Click to collapse
Did you mount the system partition in recovery? Wiping cache & dalvik might help too.
shavinda34 said:
not working with android revolution HD 9.1
Click to expand...
Click to collapse
it works great on mine
Saw it yesterday. Thanks for making other people aware of it.
Sent from my HTC One X using xda premium
not working in ARHD 9.1.0 ..
Sent from my HTC One X using Tapatalk 2
Now this has something about MIUI in the animations.
I like it.
-juanito- said:
not working in ARHD 9.1.0 ..
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
+1... not working.. mi phone is locked in boot animation.. I need restore backup..
dani_nec said:
+1... not working.. mi phone is locked in boot animation.. I need restore backup..
Click to expand...
Click to collapse
thanked by mistake lol anyway same over here.
get fcs over fcs on arhd 9.1.0
I have the evo lte running the stock sense with goodies. Would this work for me?
Sent from my EVO
dani_nec said:
+1... not working.. mi phone is locked in boot animation.. I need restore backup..
Click to expand...
Click to collapse
H-KaN said:
thanked by mistake lol anyway same over here.
get fcs over fcs on arhd 9.1.0
Click to expand...
Click to collapse
No need to restore backup. Just re-flash ARHD 9.1 WITHOUT a wipe and it should work again. You will need to re-flash any mods you have though. Sorry for the trouble guys. I'll add a warning.
Will it work on the new 2.17.401.2 stock rom?
celticking said:
I have the evo late running the stock sense with goodies. Would this work for me?
Sent from my EVO
Click to expand...
Click to collapse
I think so but please make a nandroid before continuing.
jeyml said:
Will it work on the new 2.17.401.2 stock rom?
Click to expand...
Click to collapse
Most likely yes but pls make a backup first. I'm using it on ViperX 2.0.1 which is based on 2.17.
ChillyChan said:
Most likely yes but pls make a backup first. I'm using it on ViperX 2.0.1 which is based on 2.17.
Click to expand...
Click to collapse
Thanks for the reply,just updated to 2.17.401.2 and i have only 15% battery left,i will let it tonight to charge and i will try tommorow to flash the zip,and do a nandroid backup first of course.
working great on Insertcoin 9.3.0 (base 2.17):good:
thank you
Can't get it to work. Must be because I'm on a different version of sense?
Sent from my EVO
Hello guys, I'v tried to install Bricked kernel core but stuck on the HTC logo -(( any other cores goes well.... Pls help me to solve this problem
My actions:
1)fastboot flash boot
2)Install .zip from recovery.
adb name check (adb shell uname -a) shows "Name not found" -((
OS 4.04 Stock FW v 2.17 Sence 4.1
On wich rom and wich bricked kernel, there are 2 bricked kernels. One for sense roms and one for aokp/aosp roms
And also did you repack bricked boot.img with the one of your ROM?
Sent from my EndeavorU using xda app-developers app
TToivanen said:
And also did you repack bricked boot.img with the one of your ROM?
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
I have stock rom 2.17, I'm trying to flash http://forum.xda-developers.com/showthread.php?t=1643692
And also I dont know how to repack (
Sorry, I'm a bit newbie here (
Okay guys, I'v re-packed kernel form stock kernel but still it doesnt work..... but now its rebooting at logo screen all the time (( pls help
TToivanen said:
And also did you repack bricked boot.img with the one of your ROM?
Sent from my EndeavorU using xda app-developers app
Click to expand...
Click to collapse
yes, I'v used stock kernel (due to I'm using stock ROM) but no effect
Just a thought here, download the latest faux kernel and flash the boot.img and flash the .zip
See if the phone boots......
Mr Hofs said:
Just a thought here, download the latest faux kernel and flash the boot.img and flash the .zip
See if the phone boots......
Click to expand...
Click to collapse
Faux kernel goes well, I'v wrote about it earlier...
Don't see where mate ... otherwise i would have not asked, i only see you used stock kernel
Edit 1 : ah you talk about cores......my eyes only check for the word : kernel
Edit 2 : I've seen reports of not booting in the thread a while ago, you can try to get your hands on the 0.6 or 0.5 and try again
Mr Hofs said:
Don't see where mate ... otherwise i would have not asked, i only see you used stock kernel
Click to expand...
Click to collapse
oh, really =)) Sorry mate mb I need custom ROM or it supposed to go well on Stock ROMs?
I edited my post ! Well it should work on a stock rom otherwise the other custom kernels would also fail, they are all based on the stock kernel from one point .....
Mr Hofs said:
I edited my post ! Well it should work on a stock rom otherwise the other custom kernels would also fail, they are all based on the stock kernel from one point .....
Click to expand...
Click to collapse
0.6 works fine =) thanks mate:good:
:thumbup: you just bricked your phone
Mr Hofs said:
:thumbup: you just bricked your phone
Click to expand...
Click to collapse
Yes
Hi guys,
I'm not very skilled in flashing ROMs, but I do it anyway every other day or so as am curious on what new ROMs can provide. I now longer panic when the phone get stuck at the bootscreen. Now when it occasionally happens I now have time to thinking about the reason for the bootloop - and that's why I start this thread
For some reason there are ROMs that I'm not able in install, like the official nightlies from CM 10 and Liquidsmooth RC9 - but I have no problems installing the "pure" Jellybean 4.2.1 (AOSP), TripNDroid CM 10.1 and Blade v4 (desensed) which I'm currently running.
Can anyone explain why some are able to boot on my HOX and some are not?
For your info, I'm on the Tegra 3 version using HBOOT 1.36 S-ON - Recovery is CWM 5.8.4.0
Thanks in advance.
Jonas
jonasb_dk said:
Hi guys,
I'm not very skilled in flashing ROMs, but I do it anyway every other day or so as am curious on what new ROMs can provide. I now longer panic when the phone get stuck at the bootscreen. Now when it occasionally happens I now have time to thinking about the reason for the bootloop - and that's why I start this thread
For some reason there are ROMs that I'm not able in install, like the official nightlies from CM 10 and Liquidsmooth RC9 - but I have no problems installing the "pure" Jellybean 4.2.1 (AOSP), TripNDroid CM 10.1 and Blade v4 (desensed) which I'm currently running.
Can anyone explain why some are able to boot on my HOX and some are not?
For your info, I'm on the Tegra 3 version using HBOOT 1.36 S-ON - Recovery is CWM 5.8.4.0
Thanks in advance.
Jonas
Click to expand...
Click to collapse
Fastboot erase cache after every installation.
Sent from my HTC One X using xda premium
{< r o N o $ said:
Fastboot erase cache after every installation.
Click to expand...
Click to collapse
I always do this - of course I can miss it sometimes. So I always trye reflashing if the phone get stuck in bootloop... But with the above mentiones ROMs I can't install them not matter what I do.
I think it may be caused by your hboot version: 1.36. You may need a special repacked boot.img to run some AOSP/AOKP/CM10 ROMs.
DO you Flash the correct boot.img ???
I always thought the hboot versions was backward compatible?
Regarding the boot.img -> then I alway extrat the boot from the ROM zip - and maybe that's the problem?
jonasb_dk said:
I always thought the hboot versions was backward compatible?
Regarding the boot.img -> then I alway extrat the boot from the ROM zip - and maybe that's the problem?
Click to expand...
Click to collapse
That is the problem. For example on official CM10 you need a special boot.img for higher hboots. See post #9308 in CM10 thread.
sridheepan said:
DO you Flash the correct boot.img ???
Click to expand...
Click to collapse
Indeed.... every time it happens to me it was the boot.img
jonasb_dk said:
Hi guys,
I'm not very skilled in flashing ROMs, but I do it anyway every other day or so as am curious on what new ROMs can provide. I now longer panic when the phone get stuck at the bootscreen. Now when it occasionally happens I now have time to thinking about the reason for the bootloop - and that's why I start this thread
For some reason there are ROMs that I'm not able in install, like the official nightlies from CM 10 and Liquidsmooth RC9 - but I have no problems installing the "pure" Jellybean 4.2.1 (AOSP), TripNDroid CM 10.1 and Blade v4 (desensed) which I'm currently running.
Can anyone explain why some are able to boot on my HOX and some are not?
For your info, I'm on the Tegra 3 version using HBOOT 1.36 S-ON - Recovery is CWM 5.8.4.0
Thanks in advance.
Jonas
Click to expand...
Click to collapse
The fact of the matter is that most of the 4.2.1 based custom rom are compatible with HBOOT 1.28+ on the contrary to 4.1.2 based roms. For second ones U have to flash a special boot.img.
TToivanen said:
That is the problem. For example on official CM10 you need a special boot.img for higher hboots. See post #9308 in CM10 thread.
Click to expand...
Click to collapse
Ahh... that clears up some things. Thanks buddy! :good:
Talking about the boot.img file... Is there a sort of "all-round" boot.img that can be used for all ROMS?
jonasb_dk said:
Ahh... that clears up some things. Thanks buddy! :good:
Talking about the boot.img file... Is there a sort of "all-round" boot.img that can be used for all ROMS?
Click to expand...
Click to collapse
No, such thing doesn't exist. Every ROM has it's own workaround for hboot incompatibilities.
And every ROM uses a different kernel so it would be impossible.
Sent from my HTC One X using xda app-developers app
But' that would be cool. One boot for all ROMs.. I have a dream
Sent from my A700 using xda app-developers app
Hi,
I found htc one v (miui) was update to be 3.7.19 from official link.
http://www.miui.com/download-57.html
Can I flash this to primo u ? it's a new updated version. Will it's same as Rulling or sk8erboy one ?
I guess that from sk8erboy. May be a thread just not updated. http://forum.xda-developers.com/showthread.php?t=2098740
It is the sk8erboy one. Sk8erboy is the maintainer for HTC One V Miui China. So yes it would be safe to flash. Just remember to use the CM10 Hellboy kernel.
MameTozhio said:
It is the sk8erboy one. Sk8erboy is the maintainer for HTC One V Miui China. So yes it would be safe to flash. Just remember to use the CM10 Hellboy kernel.
Click to expand...
Click to collapse
that is right.
Sent from my HTC T528w using xda premium
MameTozhio said:
It is the sk8erboy one. Sk8erboy is the maintainer for HTC One V Miui China. So yes it would be safe to flash. Just remember to use the CM10 Hellboy kernel.
Click to expand...
Click to collapse
link ?
nishanthhh said:
link ?
Click to expand...
Click to collapse
Searched?
Seraz007 said:
Searched?
Click to expand...
Click to collapse
yes i did (http://forum.xda-developers.com/showthread.php?t=1954967).
i wanted to confirm
nishanthhh said:
yes i did (http://forum.xda-developers.com/showthread.php?t=1954967).
i wanted to confirm
Click to expand...
Click to collapse
yes that is the one :good:
Miui
Thanks sk8erboy for great ROM.:victory:
I tried sk8erboy Miui V5 rom it was amazing on look , but to slow opening apps and games . Is that problem on all primou Miui roms?
BlazeREMIX said:
Thanks sk8erboy for great ROM.:victory:
I tried sk8erboy Miui V5 rom it was amazing on look , but to slow opening apps and games . Is that problem on all primou Miui roms?
Click to expand...
Click to collapse
Yep :/.
Sk8's MIUI v5 is the most smooth, I also find his HTC Sense based MIUI V4 smooth as well. Paarthdesai's MIUIv4 CyanogenMod 10 based it pretty smooth as well. But most MIUI ROMs are slow on the One V since it's only a mid-range device :/
MameTozhio said:
Yep :/.
Sk8's MIUI v5 is the most smooth, I also find his HTC Sense based MIUI V4 smooth as well. Paarthdesai's MIUIv4 CyanogenMod 10.1 based it pretty smooth as well. But most MIUI ROMs are slow on the One V since it's only a mid-range device :/
Click to expand...
Click to collapse
Can you give me the link for cm10.1 based miui?
Sent from my HTC Explorer A310e using xda premium
kaivalya97 said:
Can you give me the link for cm10.1 based miui?
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Did I say 10.1? If I did I meant CM10 o.o.
It's MIUI V4 3.1.18 running on Android 4.1.2: http://forum.xda-developers.com/showthread.php?t=1791170
kaivalya97 said:
Can you give me the link for cm10.1 based miui?
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
no this
Sent from my HTC T528w using xda premium
How much time takes to install the MIUI rom?
Hi I am newbie, sorry I didnt found any similar post.
I have a HTC One V GSM, I trying to install MIUI rom, I download it from its official site, I plan to use Titatium Kiss Kernel,
The main reasons to install MIUI is to change my phone a increase its performance, I currently have many issues with lags.
How much time takes to install the miui?
I am using TWRP to install the rom I saw the download picture but I dont know How much it takes to complete the installation?
1 hour, 4 hours?
Thanks
thestory101 said:
Hi,
I found htc one v (miui) was update to be 3.7.19 from official link.
http://www.miui.com/download-57.html
Can I flash this to primo u ? it's a new updated version. Will it's same as Rulling or sk8erboy one ?
I guess that from sk8erboy. May be a thread just not updated. http://forum.xda-developers.com/showthread.php?t=2098740
Click to expand...
Click to collapse
Mr_Fusion_88 said:
Hi I am newbie, sorry I didnt found any similar post.
I have a HTC One V GSM, I trying to install MIUI rom, I download it from its official site, I plan to use Titatium Kiss Kernel,
The main reasons to install MIUI is to change my phone a increase its performance, I currently have many issues with lags.
How much time takes to install the miui?
I am using TWRP to install the rom I saw the download picture but I dont know How much it takes to complete the installation?
1 hour, 4 hours?
Thanks
Click to expand...
Click to collapse
For me , I didn't took over 15 mins.
of course exclude download and install all apps
BTW, MIUI interface is look great except it's slow because of lagging compare to CM and Spongle.
thestory101 said:
For me , I didn't took over 15 mins.
of course exclude download and install all apps
BTW, MIUI interface is look great except it's slow because of lagging compare to CM and Spongle.
Click to expand...
Click to collapse
Thanks dude Something must be wrong, I am pretty sure I have left my phone booting 15 minutes but nothing happends
I have try also with paranoid and AOKP (the one of the pink unicorn) but I havent achieve to install another rom to my phone.
One more question: I want to create a new back up but TWRP doesnt allow me because It appears a message related with MD5 image.
So should format my sd card?
Thanks
Mr_Fusion_88 said:
Thanks dude Something must be wrong, I am pretty sure I have left my phone booting 15 minutes but nothing happends
I have try also with paranoid and AOKP (the one of the pink unicorn) but I havent achieve to install another rom to my phone.
One more question: I want to create a new back up but TWRP doesnt allow me because It appears a message related with MD5 image.
So should format my sd card?
Thanks
Click to expand...
Click to collapse
Did you flash the correct kernel?
MameTozhio said:
Did you flash the correct kernel?
Click to expand...
Click to collapse
I think so, I install Titaium Kiss Kernel 3.0.16... indeed it is the current kernel I am using in the stock rom
I having many lag issues.
Mr_Fusion_88 said:
I think so, I install Titaium Kiss Kernel 3.0.16... indeed it is the current kernel I am using in the stock rom
I having many lag issues.
Click to expand...
Click to collapse
Stock ROM? with TK kernel? Try overclocking and use smartassv2 governor, deadline scheduler.
MameTozhio said:
Stock ROM? with TK kernel? Try overclocking and use smartassv2 governor, deadline scheduler.
Click to expand...
Click to collapse
Sorry for my late response, I have been pretty busy at work.
I dont know how to overclock my phone...
Just what I want is to reduce the lags of my phone either installing a new rom or making a factory reset (but this is my last option)
I tryied to install miui and AOKP but this looks they get into a boot loop...
Hi Guys,
I am new to flashing. but however i tried my luck at it with my htc one v (gsm).
While installing the rom, the did a factory reset, wipe the cache, delvik cache and the system and then installed the rom "[AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1x [beta][08/03/2013]"
After that i booted in boot loader and installed the hellboy kernel. and then installed gaaps.
But now my phone is stuck in boot screen.
Please let me know what i did wrong and how i can fix it.
Regards,
Jerold Vaz
Did you flash the right kernel?
sent from my katana
I've not seen that version of Paranoid android ported to this phone, leading me to believe you may have got it for another phone. You need to choose a rom for the HTC One V.
mcgi5sr2 said:
I've not seen that version of Paranoid android ported to this phone, leading me to believe you may have got it for another phone. You need to choose a rom for the HTC One V.
Click to expand...
Click to collapse
Ummm......
http://forum.xda-developers.com/showthread.php?t=1794562
Search ?
sent from my katana
jeroldvaz said:
Hi Guys,
I am new to flashing. but however i tried my luck at it with my htc one v (gsm).
While installing the rom, the did a factory reset, wipe the cache, delvik cache and the system and then installed the rom "[AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1x [beta][08/03/2013]"
After that i booted in boot loader and installed the hellboy kernel. and then installed gaaps.
But now my phone is stuck in boot screen.
Please let me know what i did wrong and how i can fix it.
Regards,
Jerold Vaz
Click to expand...
Click to collapse
Which HELLBOY kernel did you flash? IronMan kernel should also work.
MameTozhio said:
Which HELLBOY kernel did you flash? IronMan kernel should also work.
Click to expand...
Click to collapse
hey thnx for the reply.
I flashed it with the latest hellboy and now it is working fine.
just another small question, which is the most stable ROM for Htc ONE V (Primou).
tried many ROMs, all ve one prob or the other.
jeroldvaz said:
hey thnx for the reply.
I flashed it with the latest hellboy and now it is working fine.
just another small question, which is the most stable ROM for Htc ONE V (Primou).
tried many ROMs, all ve one prob or the other.
Click to expand...
Click to collapse
You can try shpongle , ignoranceV2, miui,
sent from my katana
jeroldvaz said:
hey thnx for the reply.
I flashed it with the latest hellboy and now it is working fine.
just another small question, which is the most stable ROM for Htc ONE V (Primou).
tried many ROMs, all ve one prob or the other.
Click to expand...
Click to collapse
Most stable rom depends on personal opinion. Try them out and see which suits you best. Aside from that, you're not allowed to ask that; http://forum.xda-developers.com/showthread.php?t=1963635
jeroldvaz said:
hey thnx for the reply.
I flashed it with the latest hellboy and now it is working fine.
just another small question, which is the most stable ROM for Htc ONE V (Primou).
tried many ROMs, all ve one prob or the other.
Click to expand...
Click to collapse
Most stable roms are myONEv and Ignorance v2