Related
Hi guys,
I had been upgrade from 2.1 to cm7 last few day
Its quite awesome, like using other phone!
But i got a random problem that when i wake up my phone,
all the buttons is not working anymore, that im freezing on unlock screen (i do using widget locker)
no matter the power, volume or the 4 soft buttons
And a strange thing is that the system is still working!
Like when i plug in the usb, it will pop up said usb is conneted,
and the battery life will still decreasing..
So wts the problem with my defy?
Thanks a lot guys!
Write froyo sbf with rsd lite and after that install again cm7.
Sent from my MB525 using XDA App
After I upgraded to Froyo (3.4.2),
Could I downgrade back to cm7 (2.3.7)?
Coz the guide said:
"If you try to flash a lower ID version than the one already on your phone, you will just get a Black screen after booting or a screen telling you to flash an official rom."
I am just a bit worry after reading this....thanks btw!
wake prob
I have had the same issue on CM10!
Any ideas? :crying:
Hello guys,
I was just checking the phone while suddenly after locking and unlocking with the power button it didnt react. It was all freezed and didn't react at anything. I took off the battery and placed it on, turn up the phone but it stopped at the unlocking mode with no wallpaper at all. Did the same thing 4 times with no results. Then tried connecting to the PC, but with no results too. Btw the network is ok, shows the incoming calls!
P.S. The battery was very hot, and the battery app notification was showing fast reduction of the battery level...
Help guys! Thanks!
kdervisov said:
Hello guys,
I was just checking the phone while suddenly after locking and unlocking with the power button it didnt react. It was all freezed and didn't react at anything. I took off the battery and placed it on, turn up the phone but it stopped at the unlocking mode with no wallpaper at all. Did the same thing 4 times with no results. Then tried connecting to the PC, but with no results too. Btw the network is ok, shows the incoming calls!
P.S. The battery was very hot, and the battery app notification was showing fast reduction of the battery level...
Help guys! Thanks!
Click to expand...
Click to collapse
what rom and kernel are you using?
give some details
marius.a said:
what rom and kernel are you using?
give some details
Click to expand...
Click to collapse
Oh man, I can't see now cause I can't unlock it... Btw: It has Gingerbread 2.3.3 and it's NOT rooted! Need solution very quickly, I'm desperate!
if its not rooted and there is no more warantee on it root it ^^
Sent from my HTC Desire using XDA
xXKingFlowXx said:
if its not rooted and there is no more warantee on it root it ^^
Sent from my HTC Desire using XDA
Click to expand...
Click to collapse
What are the pros and cons of the rooting process?
kdervisov said:
What are the pros and cons of the rooting process?
Click to expand...
Click to collapse
You can do much more with your desire ^^
pro is that you will never have space problems apps can be moved to sd card much better than with the froyo app2sd and you are up to date with your android version 2.2.3 Gingerbread is working very nice und 4.0 ics is in dev... full control of your phone complete backup of your working rom and all apps with data. If your rom crashes youst restore it to the time it works
cons some roms have some bugs like no working gps but with scripts you can fix it by yourself.
you got no warrantee if it crahses. so much that you cant move it back to stock.
usb brick is also possible but with the 4ext recovery and the great community of XDA you can repair it
for me the space problem, the costum look and the full control on my phone are the reasons to root my phone
now its your turn to root or root not
Flow
Sent from my HTC Desire using XDA
I have been having a reboot problem on my t989, it has been turning itself after ive turned it off when i plug it into a charger.I have been trying to figure this problem out for the last to months and a havent pin pointed the problem. i have checked if it was the sd card and it wasnt that , it happened two months ago when i was running darkside evolution v8 tdj.and have tried many roms to see if it was darkside and it was not. but whenever I switch to a stock firmware such as GB or stock tmobile ICS the problem stops. i am currently running clones and drones. please if anyone knows how to fix this problem or knows whats causing this to happen it will be very appreciated. thank you!
Sounds to me like you already know the cause. When you go back to stock, do you also replace the recovery? I seem to recall there was a similar glitch in the tmo g2 where it would boot to recovery if it was powered off when attached to the charger.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
tronmech said:
Sounds to me like you already know the cause. When you go back to stock, do you also replace the recovery? I seem to recall there was a similar glitch in the tmo g2 where it would boot to recovery if it was powered off when attached to the charger.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Its not booting into recovery its turning itself on. And yes when I switch to the stock firmware I flash it via Odin.
Well, I would say to try at least one other rom. The phone has to at least partially start up in order to control the charge cycle. (Chainfire has a charge animation replacement for one of the galaxy s phones on the play story, IIRC) So at least part of the kernel starts...
Sent from my Polaroid Tablet using Tapatalk 2
Okay I will try that. And I was watching it do the self turn on and on the top corner very shortly it says something about safe mode and I'm guessing that's directly corrilated with the problem but how is it related is my question
GOTO this post: http://forum.xda-developers.com/showthread.php?t=2200614
I've flashed it on my own e973 running houstonn's jb port. It works fine as far as i can tell.
Developer told me to send some of you guys over, so if you're looking for a kernel, here you go.
Green LED works again. GPU settings now work in faux clock.
---------------------------------
I would like to bless the LG-E970 users with a kernel for your device. This kernel has many enhancements.
Read Carefully
I am in no way shape or form responsible for bricking your device. You're flashing this product at your own will. If you point your finger and try to blame me I will laugh and enjoy my beer.
Requirements
You must have your bootloader unlocked via FreeGee
Running any 4.1.2 rom - Only tested on SnowJB how ever.
Main Features
FauxSound Control Support. App must be purchased in the play store - FauxSound
Faux Speaker Loudness & Amp Control Support. App must be purchased in the play store - FauxSpeaker
OverClock and VoltageControl can be controled with kernel tuner, system tuner, or faux clock READ 2ND POST!!!!!!!!
Installation
1) Download Kernel
2) Boot into recovery
3) Backup existing rom
4) Install zip from sd-card
Change Log
Initial Release
Faux Sound - ( faux123 )
Faux Speaker - ( faux123 )
SIO Scheduler
SIO Scheduler Set As Default
USB Fast Charge - ( sk8erwitskil )
Max Read-Ahead
Raised Touch Sensitivity
Updated LZO Compression - ( faux123 )
Added Optimized AES And SHA1 Routines - ( faux123 )
03-25
Voltage Control - ( faux123 )
Over Clocked
Credits
Faux123 - for some of the best kernel enhancements android has ever seen
Sk8erwitskil - for his flashing package and USB fast charge
ShabbyPenguin - for being a friend and helping me along the way
SnowLeopardJB - for his kernel source and helping me to compile this kernel
XboxFanJ - for figuring out what i was doing wrong when packing the boot.img
If I've used something of yours or you've contributed in any way and I've not added your name above, I apologize! Please send me a PM and I'll get you added as soon as possible.
-----------------------------------
GOTO this post: http://forum.xda-developers.com/showthread.php?t=2200614
I tried this with the stock JB with Xperia Z extras and after trying to run Antutu, the phone shut off and wouldn't restart. I'm in the process of LGNPSTing back to stock.
Update: LGNPST doesn't seem to be working; after the 67% and 85% progress, normally the phone would bootloop and then a factory reset would be performed (as suggested here -> http://pastebin.com/hwQE66Wi). This time, however, the phone would just stay off after being unplugged and would not boot into any mode at all....i am currently attempting to KDZ to JB.
mk_ln said:
I tried this with the stock JB with Xperia Z extras and after trying to run Antutu, the phone shut off and wouldn't restart. I'm in the process of LGNPSTing back to stock.
Update: LGNPST doesn't seem to be working; after the 67% and 85% progress, normally the phone would bootloop and then a factory reset would be performed (as suggested here -> http://pastebin.com/hwQE66Wi). This time, however, the phone would just stay off after being unplugged and would not boot into any mode at all....i am currently attempting to KDZ to JB.
Click to expand...
Click to collapse
I tried running quadrant. didn't do anything weird. Scared to try antutu now.
Did you get your phone working?
jiexi said:
I tried running quadrant. didn't do anything weird. Scared to try antutu now.
Did you get your phone working?
Click to expand...
Click to collapse
ok, so what happened was while (after?) KDZing, the phone would bootloop while still plugged into computer. After unplugging, the phone wouldn't respond to anything; no boot, recovery, or even factory reset. So I then tried to factory reset while plugged into computer and it did give me the prompt and I went ahead with it...but the factory reset sequence never happened, i.e. no android pic, and the phone would continue to bootloop. I then plugged the phone into an outlet and the power button allowed the phone to boot up, but as soon as I unplugged it, the phone would shutdown again. But upon second boot up, which actually still required the phone to be charging via outlet, it seemed to be fine as I was able to unplug the phone and the phone remained on (battery was about 85% so the sudden shutdown from earlier made no sense). Anyways, I have factory reset the phone and all seems well...for now. *knock on wood*
---------- Post added 28th March 2013 at 12:12 AM ---------- Previous post was 27th March 2013 at 11:48 PM ----------
seems someone else had a similar issue w/ boot up:
http://forum.xda-developers.com/showpost.php?p=39627793&postcount=146
mk_ln said:
ok, so what happened was while (after?) KDZing, the phone would bootloop while still plugged into computer. After unplugging, the phone wouldn't respond to anything; no boot, recovery, or even factory reset. So I then tried to factory reset while plugged into computer and it did give me the prompt and I went ahead with it...but the factory reset sequence never happened, i.e. no android pic, and the phone would continue to bootloop. I then plugged the phone into an outlet and the power button allowed the phone to boot up, but as soon as I unplugged it, the phone would shutdown again. But upon second boot up, which actually still required the phone to be charging via outlet, it seemed to be fine as I was able to unplug the phone and the phone remained on (battery was about 85% so the sudden shutdown from earlier made no sense). Anyways, I have factory reset the phone and all seems well...for now. *knock on wood*
---------- Post added 28th March 2013 at 12:12 AM ---------- Previous post was 27th March 2013 at 11:48 PM ----------
seems someone else had a similar issue w/ boot up:
http://forum.xda-developers.com/showpost.php?p=39627793&postcount=146
Click to expand...
Click to collapse
What version of the lgog do you have, out of curiosity?
Sorry about the trouble, I've been on it for a day and it was solid as far as i could tell.
Just checking so I can follow better
Sent from my LG-E970 using Tapatalk 2
Is notification led working?
LG Optimus G E971/3/5/6/7
Elisha said:
Is notification led working?
LG Optimus G E971/3/5/6/7
Click to expand...
Click to collapse
Can't tell 100% since the maker havn't pushed any source, but since it's made for AT&T phone, i suppose only the red led will work.
Elisha said:
Is notification led working?
LG Optimus G E971/3/5/6/7
Click to expand...
Click to collapse
I can't guarantee what will n what will not work. This kernel was dedighned for the at&t lgog. The e970. The lgog line of phones r fragmented. Some have multi color led others don't. At&t got a 8mp camera while some of you got 13mp. There gsm phones n cdma phones.The list goes on.
Sent from my LG-E970 using Tapatalk 2
jiexi said:
What version of the lgog do you have, out of curiosity?
Sorry about the trouble, I've been on it for a day and it was solid as far as i could tell.
Click to expand...
Click to collapse
E971, and no need to apologize lol; you shared your experience but unfortunately mine wasn't the same.
Elisha said:
Is notification led working?
LG Optimus G E971/3/5/6/7
Click to expand...
Click to collapse
I just sent myself a text message. I didn't see green pop up. I swear red works though, i had it on charger all night.
Works fine, I installed v2 faux sound is awesome! Oc to 1.67 with performance govern got me 20754, with stock kernel was getting 20411 on houstons jb
Sent from my LG-E971 using xda app-developers app
I've tried SK8's kernel before and I'm aware that the kernels are interchangeable minus the LED notification. But this is the only phone that I really don't care about OCing at the moment.
LG Optimus G E971/3/5/6/7
Elisha said:
I've tried SK8's kernel before and I'm aware that the kernels are interchangeable minus the LED notification. But this is the only phone that I really don't care about OCing at the moment.
LG Optimus G E971/3/5/6/7
Click to expand...
Click to collapse
Oc is an option. You dont have to over clock. Personally I under clock n disable cores. There's more to the kernel then over clocking.
Sent from my LG-E970 using Tapatalk 2
MysteryEmotionz said:
Oc is an option. You dont have to over clock. Personally I under clock n disable cores. There's more to the kernel then over clocking.
Sent from my LG-E970 using Tapatalk 2
Click to expand...
Click to collapse
True but I have been following your original thread since you released initially. I'll wait till it's a little more mature. We need more collaboration for stock based kernels.
Hopefully you can figure out the random SOD issue!
LG Optimus G E971/3/5/6/7
Only red LED, no green LED. Missing that green LED notification light...
Actually, the notification light doesn't even come on at the moment unless it's charging, so it gets to blink red.
Not sure if this was caused by kernel, but under battery use it says that system UI has higher usage than screen
Is there a way to turn fast charge on?
Sent from my LG-E971 using xda app-developers app
I just dled the source for the 971/973/975 am I misreading someone?
Sent from my LG-E970 using Tapatalk 2
jiexi said:
Not sure if this was caused by kernel, but under battery use it says that system UI has higher usage than screen
Click to expand...
Click to collapse
Mine also states the same, almost double that of the screen.
Sent from my LG-E971 using xda app-developers app
So, lets cut to the chase here.
Was playing around with my CM10.1 powered Galaxy W when it shutsdown by itself when its on sleep mode.
I tried switching it back on and it just shows the "Samsung" brand name in verry short seconds and then repeats from the start. How to fix this manually? Am i suppose to go for SSC???
Sent from my eeepc using XDA Premium 4 mobile app
TiTAN-O-One said:
So, lets cut to the chase here.
Was playing around with my CM10.1 powered Galaxy W when it shutsdown by itself when its on sleep mode.
I tried switching it back on and it just shows the "Samsung" brand name in verry short seconds and then repeats from the start. How to fix this manually? Am i suppose to go for SSC???
Sent from my eeepc using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you didn't install any custom kernel/mod/system tweak, then from CWM recovery, you could try the "wipe data/ factory reset" option. See if it helps in any way. Although...from what you're saying...looks like you've got some custom stuff in there. For this case, I'm afraid your only way out is by making a pristine install of that ROM.
arsradu said:
If you didn't install any custom kernel/mod/system tweak, then from CWM recovery, you could try the "wipe data/ factory reset" option. See if it helps in any way. Although...from what you're saying...looks like you've got some custom stuff in there. For this case, I'm afraid your only way out is by making a pristine install of that ROM.
Click to expand...
Click to collapse
I only flashed MonsterV15 ROM after i pristined everrything. Also, I can't go to CWM properly as my phone keeps rebooting. The boot sequence i guess is Samsung -> Model no. -> bootanime' but i can only go for the first step and then it reboots. Another thing i discovered is that my phone switches on by itself when i insert the battery
Sent from my eeepc using XDA Premium 4 mobile app
TiTAN-O-One said:
I only flashed MonsterV15 ROM after i pristined everrything. Also, I can't go to CWM properly as my phone keeps rebooting. The boot sequence i guess is Samsung -> Model no. -> bootanime' but i can only go for the first step and then it reboots. Another thing i discovered is that my phone switches on by itself when i insert the battery
Sent from my eeepc using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well, both sound like ROM issues to me now. But apparently at least one of them (the reboot issue) should be fixed. So head over to the dev thread. Looks like there is some new stuff in there. Also if the auto-turn-on thing when inserting the battery is not fixed too, you might as well report this in that thread.
Sent from my GT-I9195 using Tapatalk
arsradu said:
Well, both sound like ROM issues to me now. But apparently at least one of them (the reboot issue) should be fixed. So head over to the dev thread. Looks like there is some new stuff in there. Also if the auto-turn-on thing when inserting the battery is not fixed too, you might as well report this in that thread.
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
Uhm, actually, the auto-turn-on issue & reboot issue thing happens when i insert the battery as well. Also, i can assure you that this ain't ROM issue. Previously, when i used OneOfAKind ROM, i switched SIM cards and then the auto-turn-on issue & reboot issue happened from there. I left my phone and battery apart for a day and then tried putting it backand BOOM it came back to life. So from there, hoping tht THANG won't happen again in my whole life, i pristined installed MonsterV15 and all went well when the THANG happened once more and i ended up heree .___.
Sent from my eeepc using XDA Premium 4 mobile app
TiTAN-O-One said:
Uhm, actually, the auto-turn-on issue & reboot issue thing happens when i insert the battery as well. Also, i can assure you that this ain't ROM issue. Previously, when i used OneOfAKind ROM, i switched SIM cards and then the auto-turn-on issue & reboot issue happened from there. I left my phone and battery apart for a day and then tried putting it backand BOOM it came back to life. So from there, hoping tht THANG won't happen again in my whole life, i pristined installed MonsterV15 and all went well when the THANG happened once more and i ended up heree .___.
Sent from my eeepc using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Standard battery? Could you try with another (maybe stock) battery. Also...does it happen with any CM version?
This ain't software related....it's hardware related.....guaranteed.
It's a faulty power button.
The power button is behaving as if it were being continuously held in.
If you continually hold the power button on a normally booting W I bet you could replicate these exact symptoms. The results would be the same on insertion of the battery too.....
I answered an identical question a few weeks ago in this forum....and having done some research on the issue, I can tell you the only way you're going to fix it is take it to a service centre where they'll replace the entire main board......the power button is soldered directly to it.....
I'm guessing you can't successfully enter download mode either? So flashing back to stock beforehand isn't an option either....that shouldn't be a problem though.....if you can't get the phone to boot, they won't be able to either.....so they won't be able to tell what OS you're running. Even if they can, there's NO WAY they can argue that running a cusROM caused the power button to fail. Don't forget that the warrantee on Samsung phones is 2 years........
sent from either my Alliance powered S2 or my ArcoCM powered W via XDA Developers App
keithross39 said:
This ain't software related....it's hardware related.....guaranteed.
It's a faulty power button.
The power button is behaving as if it were being continuously held in.
If you continually hold the power button on a normally booting W I bet you could replicate these exact symptoms. The results would be the same on insertion of the battery too.....
I answered an identical question a few weeks ago in this forum....and having done some research on the issue, I can tell you the only way you're going to fix it is take it to a service centre where they'll replace the entire main board......the power button is soldered directly to it.....
I'm guessing you can't successfully enter download mode either? So flashing back to stock beforehand isn't an option either....that shouldn't be a problem though.....if you can't get the phone to boot, they won't be able to either.....so they won't be able to tell what OS you're running. Even if they can, there's NO WAY they can argue that running a cusROM caused the power button to fail. Don't forget that the warrantee on Samsung phones is 2 years........
sent from either my Alliance powered S2 or my ArcoCM powered W via XDA Developers App
Click to expand...
Click to collapse
yea... I totally agree with keithross39. it's hardware related... Me and @hurtsky have this problem before too~ what i did is, insert the battery (and it will power on automatically). then spam the power button while it's booting... and it successfully booted (because the power button is not 'holding' anymore), you will see the reboot dialog pop out or screen turning on and off automatically. If you are lucky (like me) i fixed it myself by spamming the power button add don't press the power button anymore.... For now, I use the notificationbar's widget as screenoff, use terminal emulator to reboot or reboot recovery. I know that's weird, But I don't want to send it samsung because my phone is not original, it's AP
ipromeh said:
yea... I totally agree with keithross39. it's hardware related... Me and @hurtsky have this problem before too~ what i did is, insert the battery (and it will power on automatically). then spam the power button while it's booting... and it successfully booted (because the power button is not 'holding' anymore), you will see the reboot dialog pop out or screen turning on and off automatically. If you are lucky (like me) i fixed it myself by spamming the power button add don't press the power button anymore.... For now, I use the notificationbar's widget as screenoff, use terminal emulator to reboot or reboot recovery. I know that's weird, But I don't want to send it samsung because my phone is not original, it's AP
Click to expand...
Click to collapse
So you mean, you did that once and your phone booted sucessfully? Wow!!
Sent from my eeepc using XDA Premium 4 mobile app
keithross39 said:
This ain't software related....it's hardware related.....guaranteed.
It's a faulty power button.
The power button is behaving as if it were being continuously held in.
If you continually hold the power button on a normally booting W I bet you could replicate these exact symptoms. The results would be the same on insertion of the battery too.....
I answered an identical question a few weeks ago in this forum....and having done some research on the issue, I can tell you the only way you're going to fix it is take it to a service centre where they'll replace the entire main board......the power button is soldered directly to it.....
I'm guessing you can't successfully enter download mode either? So flashing back to stock beforehand isn't an option either....that shouldn't be a problem though.....if you can't get the phone to boot, they won't be able to either.....so they won't be able to tell what OS you're running. Even if they can, there's NO WAY they can argue that running a cusROM caused the power button to fail. Don't forget that the warrantee on Samsung phones is 2 years........
sent from either my Alliance powered S2 or my ArcoCM powered W via XDA Developers App
Click to expand...
Click to collapse
Funny though, last time, that power off loop thing happened to me again but i managed to pass the bootanimation and to the ROM after i left my phone un touch for a day and also cos' i have this certificate of warranty and it says i only have 1 year of warranty IF i send the customer copy to samsung to so called "register" the warranty which i didn't, i can't really do anything
Sent from my eeepc using XDA Premium 4 mobile app
Anyways guys, thanks for helping me, now, there's another issue, my phone didn't switch on upon inserting the battery however i can't poweron the device Charging works but it doesn't show the battery juice indicator. j
Sent from my eeepc using XDA Premium 4 mobile app
UPDATE: guys, i took my phone to a repair shop to yeknow' gauge the amt of money to repair the phone. In SG, the galaxy w secondhand costs $135 ! I bought it firsthand at $330! So, i'm guessin' if the amt to replace the mainboard is too high, i'd just buy tht secondhand phone ... -.-
Sent from my eeepc using XDA Premium 4 mobile app