Required: HTC One X PCB Layout - HTC One X

hello,
While solving the wifi issue, accidentally wifi pin(spring) from motherboard got broken and now i m not able to do soldering and my wifi is not working.
I need PCB Layout (or motherboard layout or main board layout or circuit diagram) for HTC One X so that i can trace the connection for wifi and directly connect there if possible.
I tried to search on google but cudnt find it. can someone plz provide the layout??
I dont know why its not easily available on internet. do companies hide this kind of info?
bcoz my phone is imported from another country, HTC service center refused to repair it...
plz help me..
thank you.

broken antenna is shown in the pic.
plz tell me if i can solve this issue somehow. i have attached the pic which shows the broken part.

anksh said:
hello,
While solving the wifi issue, accidentally wifi pin(spring) from motherboard got broken and now i m not able to do soldering and my wifi is not working.
I need PCB Layout (or motherboard layout or main board layout or circuit diagram) for HTC One X so that i can trace the connection for wifi and directly connect there if possible.
I tried to search on google but cudnt find it. can someone plz provide the layout??
I dont know why its not easily available on internet. do companies hide this kind of info?
bcoz my phone is imported from another country, HTC service center refused to repair it...
plz help me..
thank you.
Click to expand...
Click to collapse
Your cellphone is a Quadcore..and I took my tester and betwen the 2 pins there are 1.2 omhs so is the same point of the PBC..in the backdoor both pins touch the same plate..maybe you only need is try to separate a little the pin to be sure it touches the plate in the backdoor
I hope this help..sorry bad english

Thanks for replying ...! Finally some1 replied...
Slight confusion here..
Plz tell me what shud I do exactly? Shud I use the other pin instead of that broken pin? Bcoz they r the same..?
HOX
CID: VODAP021 (Aus voda),
HBOOT: 1.36
S-ON
ARHD 19

anksh said:
Thanks for replying ...! Finally some1 replied...
Slight confusion here..
Plz tell me what shud I do exactly? Shud I use the other pin instead of that broken pin? Bcoz they r the same..?
HOX
CID: VODAP021 (Aus voda),
HBOOT: 1.36
S-ON
ARHD 19
Click to expand...
Click to collapse
I think that is the same You should start by cleaning the plate in the backdoor and pull gently the pin .and assambly again.hope it helps

it is the same point, juste solder a wire between the remaining good point and the antena in the housing, be careful not to breack the only one point left.
if you don't want to use soldering any more, juste gently pull the pin to make it touch the antena, remember you have to do it gentely !!!!

its working now..!
amino1 said:
it is the same point, juste solder a wire between the remaining good point and the antena in the housing, be careful not to breack the only one point left.
if you don't want to use soldering any more, juste gently pull the pin to make it touch the antena, remember you have to do it gentely !!!!
Click to expand...
Click to collapse
jabo7 said:
I think that is the same You should start by cleaning the plate in the backdoor and pull gently the pin .and assambly again.hope it helps
Click to expand...
Click to collapse
thanks for helping..! i took the help of an expert for soldering purpose and its done..!! now wifi is working nicely.. :good:
but i feel that its fluctuating many times. means at the same place suddenly there will be more signal strength and suddenly it will decrease also..!! (i think thats not something to worry bcoz it happens at the places which are lil far from router.)

anksh said:
thanks for helping..! i took the help of an expert for soldering purpose and its done..!! now wifi is working nicely.. :good:
but i feel that its fluctuating many times. means at the same place suddenly there will be more signal strength and suddenly it will decrease also..!! (i think thats not something to worry bcoz it happens at the places which are lil far from router.)
Click to expand...
Click to collapse
happy to hear it worked, you did the best solution, asking help of expert in soldering :good:
don't worry about the fluctuating of wifi since you are far from the router, this is normal.

amino1 said:
happy to hear it worked, you did the best solution, asking help of expert in soldering :good:
don't worry about the fluctuating of wifi since you are far from the router, this is normal.
Click to expand...
Click to collapse
Should look like this

Related

HELP!! Artemis blank white screen and not responding :(

ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Maybe, it saw a ghost?
MaskedMarauder said:
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Click to expand...
Click to collapse
nope same blank white screen with a line in the middle.
Looks like a serious hardware death there. Did you buy it off an ebay shop or private? If from a shop you may be able to make a warranty claim, if not you'd have to post it to a repair centre and cross your fingers.
I am presuming here that you have tried a Hard Reset too, ie holding down both softkeys whilst resetting, then releasing the softkeys when you get a confirmation message.
if i press the reset button nothing happens. Orbit only responds to the power button. I bought it off ebay and hence the problem. Do you think it is only a screen malfunction and if i buy a replacement screen I should be able to solve the problem? is it easy to replace the screen by myself?
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
derooseolivier said:
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
Click to expand...
Click to collapse
Could you give me step by step instructions on flashing the xda orbit rom. Out of frusturation i tried updating the orbit to WM6 and it successfuly updated according to message on my computer screen. So i have wm6 on my phone now but still the same problem.
I exctacted the file and put it in the root of my sd card and pressed the voice button and power button. Now how do i know that the ROM is being flashed? (since i just see the white screen). Even for the orbit should i just name the file on the microsd card as ARTEIMG.nbh ?
Thanks for all your help..but since i am new to this could you please explain teh process in more simpler terms?
Thanks again
dealsoutlook said:
ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Click to expand...
Click to collapse
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
neilhhardy said:
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
Click to expand...
Click to collapse
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
If You Put Out Your Battery More Than 30 Second, It Make The Same ?? And In The Same Place???
NOW YOU HAVE NOTHING TO LOOSE... if is it the screen, you must change it...
But before, try to flash one more time your artemis with the original wm5 and, for sure, begin to make it supercid before (so you are sure you dont make a second problem !).
The client with a same problem (but not with the little trace at the right side from your screen) is happy now ! Play also a littlebit to make hardreset, softreset, usb bootloadermode ... And maybe you will see the color coming back!
I said one more time, i am not a professional for this problem but, "still trying" is never bad.... And for the screen... if you command him, you must waiting... so... try it first and if you have no more solution to try, send the pdaphone to htc... And if it's the screen, pay the replacement to htc and dont make it you self ( ebay?? are you sure 100 % the screen you buy its working???!!!??? ).
Yeah, if your computer recognises it, it'll just need a new screen.
cr0bar said:
Yeah, if your computer recognises it, it'll just need a new screen.
Click to expand...
Click to collapse
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
to dealsoutlook
i've just sent you a pm! please check
Does anyone know, where can it be send for repair to?
I have a bricked phone (even bootloader is not started).
And it was bought at eBay, so no any warranty or so.
This is XDA Orbit and I'm in Austria, where O2 has no representation.
Could you, please, advice the companies/possibilities to reapir it (chip change or direct reflashing - not via USB).
Alex
neilhhardy said:
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
Click to expand...
Click to collapse
Thanks for letting me know..i though it was a pretty simple thing to do by myself. But now I definitely dont want to take that chance. I will shop around for some local cell repair shop. But since this phone is not available in canada I dont know where to go. Does anyone know of a repair shop in Toronto?
I would think the quickest turnaround would be throught HTCamerica. Its located in Houston Tx...
http://www.america.htc.com/support/service-repairs.html
thats just my two cents, turnaround time is like 5 to 7 days after receipt... if they service your phone, they do p3300, you would have to call to find out
Hey Buddy
dealsoutlook said:
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
Click to expand...
Click to collapse
I can help u. just reply. I have gone thru such case. OK Post me and I will guide U
Cheers
This happened to mine too,and screen was not broken.Working internally but white 'screen of death' showing.Sent back to 02 but no mention of fault on return.I think rom suffers corruption since it was after x close, fix.Not sure though!

How to fix GPS on HTC ONE X , bouncing , and lock problems on satelits ( Tutorial )

For those who have problems with GPS on HTC ONE X i make a tutorial how to fix this.
This method work perfectly for me,and for other users.
If you are not scare to open your phone fallow this steps like in tutorial.
Method 1
1: open your phone to reveal what is inside
2: pull up those connectors shown in photo
3: close back
4: everifing is fix
Method 2
Instead of pulling up thouse pin ,use a soldering iron and put some soldering on the spot where pins touch the antena .
THIS WORKS BECOUSE AFTER THAT THE CONNECTOR APLY MORE PRESURE TO ANTENA AND NOW THE CIRCUIT IS COMPLETE
Hope this will fix all your problem with GPS, WIFI, Signal
PLEASE GIVE CREDIT IF THAT HELP YOU TWO!!
Link with tutorial http://www.youtube.com/watch?v=NfH48nbCFE4&feature=plcp
I will put a link here that will show you how to open your phone corectly.
http://www.youtube.com/watch?v=_jZ-nelmWAI in this is open only with hands
http://www.youtube.com/watch?v=r-vdrbiBePA&feature=related here is open with right tolls
After you fix this hardware problem to be complete to lock on satelits follow this link to finish agps fix
http://forum.xda-developers.com/showthread.php?t=1239713
I will attach a few screen shots with GPS test results after i fix the antena.
I will mentioned the sky was clowdly and it was raining
I m not responsible if anything happens with your personal phone
This method worked perfectely for me
Excellent - this is the only thing that actually fixes this hardware issue.
I follwed your tutorial. Bought a pack of 5 plectrums off EBay for 99p to open the HOX like you did in the video.
Best 99p ever spent.
A lot better than sending phone away for 2 weeks only to hope it may be fixed.
Took 5 minutes, did it myself and don't lose all your data like you do sending it to HTC.
As I mentioned in another post, I had given up hope on my GPS, but didn't want to send off my One X due to root, custom ROM and stories of long waits without the phone actually being fixed.
This fix worked perfectly for me.
If you are having GPS problems and have the nerve, I suggest you try this.
Gabrielvl, thanks again.
danlat1415 said:
Excellent - this is the only thing that actually fixes this hardware issue.
I follwed your tutorial. Bought a pack of 5 plectrums off EBay for 99p to open the HOX like you did in the video.
Best 99p ever spent.
A lot better than sending phone away for 2 weeks only to hope it may be fixed.
Took 5 minutes, did it myself and don't lose all your data like you do sending it to HTC.
Click to expand...
Click to collapse
U dont buy plectrums from me ) ,just kidding
I m glad this help you 2
Just Me said:
As I mentioned in another post, I had given up hope on my GPS, but didn't want to send off my One X due to root, custom ROM and stories of long waits without the phone actually being fixed.
This fix worked perfectly for me.
If you are having GPS problems and have the nerve, I suggest you try this.
Gabrielvl, thanks again.
Click to expand...
Click to collapse
Wellcome!!
I hope this tutorial will help and other users
Didn't really notice a difference for me (HTC One X Intl) and on top of that, i broke a wifi pin and damaged a network pin....
All seems to be working (GPS is still a bit weird), does anyone know if wifi will work properly on one pin and network on a slightly damaged pin?
danz207 said:
Didn't really notice a difference for me (HTC One X Intl) and on top of that, i broke a wifi pin and damaged a network pin....
All seems to be working (GPS is still a bit weird), does anyone know if wifi will work properly on one pin and network on a slightly damaged pin?
Click to expand...
Click to collapse
You can try to soldering a wire from brocken pin to antena. If u can do that your problem will be fix. I know for sure becouse a friend happening the same like you and he fix with a wire
I dont have a soldering iron and i'm not gonna buy one just for a pin. I havent noticed any wifi problems, I still connect to 2.4GHz and 5Ghz and speed is still the same and with the network, its on 1 or 2 bars but i am inside and it usually is on that anyway and the GPS is not fixed, if anything, worse. But again, i am inside.
danz207 said:
I dont have a soldering iron and i'm not gonna buy one just for a pin. I havent noticed any wifi problems, I still connect to 2.4GHz and 5Ghz and speed is still the same and with the network, its on 1 or 2 bars but i am inside and it usually is on that anyway and the GPS is not fixed, if anything, worse. But again, i am inside.
Click to expand...
Click to collapse
Make some test autside and come back with results.
danz207 said:
Didn't really notice a difference for me (HTC One X Intl) and on top of that, i broke a wifi pin and damaged a network pin....
All seems to be working (GPS is still a bit weird), does anyone know if wifi will work properly on one pin and network on a slightly damaged pin?
Click to expand...
Click to collapse
If it would work properly on one pin, thew would only have one pin to start with.
gabrielvl said:
You can try to soldering a wire from brocken pin to antena. If u can do that your problem will be fix. I know for sure becouse a friend happening the same like you and he fix with a wire
Click to expand...
Click to collapse
Soldering wires is not a good solution, they will act as antennae, which are a specific length tuned to the desired frequency.
Outside the gps was pretty good, the wifi is only one one pin and i notice no difference. GPS gets about 20 inside (used to be about 25-30) and outside i get about 35-40 (same).
danz207 said:
Outside the gps was pretty good, the wifi is only one one pin and i notice no difference. GPS gets about 20 inside (used to be about 25-30) and outside i get about 35-40 (same).
Click to expand...
Click to collapse
I you are satisface with that, dont do anything
OH GOD GUYS PLEASE STOP this is the same thing that I saw back in the Desire HD forums, and it ended poorly for pretty much everyone.
Do NOT try this unless you are out of warranty, the GPS antenna connectors are VERY thin and VERY weak, and it is VERY easy to SNAP them!
Hunt3r.j2 said:
OH GOD GUYS PLEASE STOP this is the same thing that I saw back in the Desire HD forums, and it ended poorly for pretty much everyone.
Do NOT try this unless you are out of warranty, the GPS antenna connectors are VERY thin and VERY weak, and it is VERY easy to SNAP them!
Click to expand...
Click to collapse
You are right..,is not a easy job to do. I manage to do that becouse i have some experience with hardware,and i know wend to STOP ,not pulling to much...
Bat for those who have problem with GPS and ,the phone is not in waranty is a chance to fixit.
ONE MORE TIME TRY NOT TO BROKE ANYTHING
Can't believe it I was about to take my phone back in as my GPS had fully stopped working did this as I'm experienced enough to do such fix and my GPS is back again thanks for the post been a life saver
Sent from my HTC One X using xda app-developers app
dryan433 said:
Can't believe it I was about to take my phone back in as my GPS had fully stopped working did this as I'm experienced enough to do such fix and my GPS is back again thanks for the post been a life saver
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Exactly what i say..,if u make with precaution what is in tutorial,nothing is going to be wrong,and u fix GPS
Hello,
i registered to this forum to thank you.
My GPS what not working at all from months. I did exactly what you descibe and it's now OK.
I must warn everibody because opening (and reclosing) a HTC One X is very touchy. So do it only with experience. At a moment i was thinking i would have to buy a new HTC but a manage to reclose it properly.
Bye !
benito80 said:
Hello,
i registered to this forum to thank you.
My GPS what not working at all from months. I did exactly what you descibe and it's now OK.
I must warn everibody because opening (and reclosing) a HTC One X is very touchy. So do it only with experience. At a moment i was thinking i would have to buy a new HTC but a manage to reclose it properly.
Bye !
Click to expand...
Click to collapse
Sow now everythink is ok with your GPS
And you dont make any damage to your device.??
Mine randomly won't turn off and keeps my phone awake..
Mrkrackie said:
Mine randomly won't turn off and keeps my phone awake..
Click to expand...
Click to collapse
Wich rom you use? Stock? Custom?

HOX No Reception No service

Hi,
My HOX international vodafone edition had the wifi problem, vodafone refused to fix it due to a crack so I attempted the fix.
I opened it up and placed foil on the contacts and then reassembled it. After that wifi was great and all good, however after about 1 hour
the phone started to get really 3G bad reception, after about an hour of this the phone lost all 3G reception and now will not join the networks or anything. (wifi is great tho)
Need help
What do you think is broken or gone wrong and what parts would i have to buy to fix it?
Thanks so much.
-beachedazd
The tinfoil has probably fallen off and/or shorted.
BenPope said:
The tinfoil has probably fallen off and/or shorted.
Click to expand...
Click to collapse
Is there any chance of fixing it or should I give up?
beachedazd said:
Is there any chance of fixing it or should I give up?
Click to expand...
Click to collapse
Well you can't sort it out by talking about it, you'll need to open it and have a look. If the tinfoil has moved, I suggest you remove all signs if the tinfoil and attempt a better repair.
The foil could be interfering with the reception
sent from my highgrade HTC one x

Broken WiFi and Bluetooth

Hi all. My phone felt on the floor from 1,5 metres and now I get errors while trying to switch on bluetooth or wifi. I wiped all, flashed stock rom with stock boot.img and already done all can I do in terms of software modifications.. Also I deassembled it to be sure any cable is disconnected. In fact seems that all is ok . Surely is an hardware fault but I don't know where wifi and bluetooth hardware is. Can anyone help me telling me where they are ? Maybe with a photo of the internal part of the hox to indicate them.. Maybe I didn't look with attention for a disconnected cable or a broken part..
Also my cpu is unable to go in deep sleep now..
Please help me guys
Mikyno said:
Hi all. My phone felt on the floor from 1,5 metres and now I get errors while trying to switch on bluetooth or wifi. I wiped all, flashed stock rom with stock boot.img and already done all can I do in terms of software modifications.. Also I deassembled it to be sure any cable is disconnected. In fact seems that all is ok . Surely is an hardware fault but I don't know where wifi and bluetooth hardware is. Can anyone help me telling me where they are ? Maybe with a photo of the internal part of the hox to indicate them.. Maybe I didn't look with attention for a disconnected cable or a broken part..
Also my cpu is unable to go in deep sleep now..
Please help me guys
Click to expand...
Click to collapse
Google for a YouTube tutorial on changing screen or something, they often explain what each part is as they are disconnecting or reconnecting
Sent from my HTC One X using Tapatalk 2
nogotaclue said:
Google for a YouTube tutorial on changing screen or something, they often explain what each part is as they are disconnecting or reconnecting
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I tried but didn't find any detailed tear down.. Can u help me please ? I am thinking of changing the mobo by myself..
This site/article may be able to help you
landoftechnology website
htc one x hardware issue causing wifi issues <--- try googling this, and the correct site/link should come up, it is not letting me post a URL
Good luck!
WarpSeeker said:
This site/article may be able to help you
landoftechnology website
htc one x hardware issue causing wifi issues <--- try googling this, and the correct site/link should come up, it is not letting me post a URL
Good luck!
Click to expand...
Click to collapse
It's not this issue.. I mean wi fi is not working anymore.. It doesn't switch on because it felt on the floor..
What about changing the motherboard ? http://www.ebay.com/itm/HTC-ONE-X-S...rd-With-Cameras-AS-IS-For-Parts-/251255883891 with this one ? Is the tegra chip present ? I need only to swap them?
Mikyno said:
I tried but didn't find any detailed tear down.. Can u help me please ? I am thinking of changing the mobo by myself..
Click to expand...
Click to collapse
this video is for screen replacement but it shows how to remove and replace mobo https://www.youtube.com/watch?v=OIeO0DueMcg
I hope you are not thinking of buying the mobo in the ebay link? it states "untested", "moisture sticker activated" and "ripped cable"!!
nogotaclue said:
this video is for screen replacement but it shows how to remove and replace mobo https://www.youtube.com/watch?v=OIeO0DueMcg
I hope you are not thinking of buying the mobo in the ebay link? it states "untested", "moisture sticker activated" and "ripped cable"!!
Click to expand...
Click to collapse
Thanks .. Where I can buy it at a decent price ? It costs like 160 euro..
Mikyno said:
Thanks .. Where I can buy it at a decent price ? It costs like 160 euro..
Click to expand...
Click to collapse
Don't know which country you are in, but they are going for about £70 on UK site. Alternatively have you considered just buying the antenna boards? I have seen those going on UK eBay for just under £15
Sent from my Awesome One X on ViperX 3.5.5 using XDA Premium
nogotaclue said:
Don't know which country you are in, but they are going for about £70 on UK site. Alternatively have you considered just buying the antenna boards? I have seen those going on UK eBay for just under £15
Sent from my Awesome One X on ViperX 3.5.5 using XDA Premium
Click to expand...
Click to collapse
Can u link it in a private message? Both of them please.. I can't use wifi or bluetooth and I am really really sad
Mikyno said:
Can u link it in a private message? Both of them please.. I can't use wifi or bluetooth and I am really really sad
Click to expand...
Click to collapse
PM'ed you

[Q] Please help with harware problem :(

Hello everyone and happy 2014 year! I apologize if the subject site is not correct, but I have a big problem and I hope you can help me. So my problem is recently I got HTC Desire HD, but with a screen in a very bad condition. The problem is that once it is fully charged it does not even vibrate when i turn it on and can not figure out if it works. My question is how can I check is the motherboard work?
PS: Im so sorry for my bad english!
SkHowl said:
Hello everyone and happy 2014 year! I apologize if the subject site is not correct, but I have a big problem and I hope you can help me. So my problem is recently I got HTC Desire HD, but with a screen in a very bad condition. The problem is that once it is fully charged it does not even vibrate when i turn it on and can not figure out if it works. My question is how can I check is the motherboard work?
PS: Im so sorry for my bad english!
Click to expand...
Click to collapse
I don't understand. The problem is that the phone, when fully charged, doesn't vibrate. If I were you I would not bother opening up the phone. If you can't live without the vibration then you can replace it, if it's the faulty part.
Unfortunately it's not possible to determine what is causing your problem from this side
Inviato dal mio GT-I9100
totalnoob34 said:
I don't understand. The problem is that the phone, when fully charged, doesn't vibrate. If I were you I would not bother opening up the phone. If you can't live without the vibration then you can replace it, if it's the faulty part.
Unfortunately it's not possible to determine what is causing your problem from this side
Click to expand...
Click to collapse
The vibrate is`t a problem i can replace it, i can opening phone (4 times i do it in one day :laugh: ) The problem is: i cant determninate is the motherboard work or not. It isn`t vibrate, start light or something to show it is live... Thats why i search for other ways to determining motherboard problem with tools. I want to know this other ways :laugh: maybe molticet (multitool) + power supply maybe i dont know
SkHowl said:
The vibrate is`t a problem i can replace it, i can opening phone (4 times i do it in one day :laugh: ) The problem is: i cant determninate is the motherboard work or not. It isn`t vibrate, start light or something to show it is live... Thats why i search for other ways to determining motherboard problem with tools. I want to know this other ways :laugh: maybe molticet (multitool) + power supply maybe i dont know
Click to expand...
Click to collapse
When it's not showing any sign of life, check the battery
Inviato dal mio GT-I9100
totalnoob34 said:
When it's not showing any sign of life, check the battery
Click to expand...
Click to collapse
Its checked... works fine Volts and Ampers are OK...
SkHowl said:
Its checked... works fine Volts and Ampers are OK...
Click to expand...
Click to collapse
Then you will probably have to replace the whole motherboard, or maybe JTAG yours. It's strange though, phones don't usually die.
Did you pull the battery while the phone was on?
Inviato dal mio GT-I9100
totalnoob34 said:
Then you will probably have to replace the whole motherboard, or maybe JTAG yours. It's strange though, phones don't usually die.
Did you pull the battery while the phone was on?
Click to expand...
Click to collapse
No. I dont pull the battery. I think i need to replace the motherboard to but my question was: thare is a way to test the motherboard with some tool like multitool (multicet) because i really want to know is the motherboard broke or not (BTW i know some way with changing with other HTC Desire HD phone but i dont have other...)
SkHowl said:
No. I dont pull the battery. I think i need to replace the motherboard to but my question was: thare is a way to test the motherboard with some tool like multitool (multicet) because i really want to know is the motherboard broke or not (BTW i know some way with changing with other HTC Desire HD phone but i dont have other...)
Click to expand...
Click to collapse
Testing the motherboard is theoretically possible, for example with a JTAG or Riffbox, but I assume you son't have one, otherwise you would be running a mobile repair shop and you would know more than most people here as far as mobile tech goes. There is no way of testing the phone otherwise, the only way of having an usable phone again is replacing the motherboard.
totalnoob34 said:
Testing the motherboard is theoretically possible, for example with a JTAG or Riffbox, but I assume you son't have one, otherwise you would be running a mobile repair shop and you would know more than most people here as far as mobile tech goes. There is no way of testing the phone otherwise, the only way of having an usable phone again is replacing the motherboard.
Click to expand...
Click to collapse
Im i student in Electrical university with electrical engineering (but for my luck with high voltage... not low voltage profile ) but in my university i think i can find JTAG or Riff box
SkHowl said:
Im i student in Electrical university with electrical engineering (but for my luck with high voltage... not low voltage profile ) but in my university i think i can find JTAG or Riff box
Click to expand...
Click to collapse
Nice, but then you will need to use them
Inviato dal mio GT-I9100
Well i will try it. My hopes are to repair the phone
Sent from my HTC Desire using XDA Premium 4 mobile app

Categories

Resources