How to install cm10 on xperia s(tutorial) - Sony Xperia S, Acro S, Ion

Requirements
1. Sony Xperia S smartphone.
2. Make sure the smartphone’s bootloader in unlocked. If not, follow the official documentation herehttp://unlockbootloader.sonymobile.com/.
3. Install the device drivers.
4. Download fastboot drivers from herehttp://xperiadev.wordpress.com/guidelines-xperia/flashtool-fastboot/. Extract fastboot.zip into a directory.
5. Backup important data like Apps, SMS’s, Bookmarks, Contact etc.
6. If possible fully charge the phone before proceeding.
How to install CyanogenMod 10 Jelly Bean ROM on Sony Xperia S
1. Download the CyanogenMod 10 based Jelly Bean ROM from the XDA page.
2. Also download the Google Apps Package.
3. Move the files to the root of phone’s SD Card.
4. Extract the kernel.elf/boot.img file from the firmware .zip file to the fastboot directory.
5. Disconnect and Power off the phone.
6. Reboot Xperia S in the fastboot mode by pressing and holding Volume + Power button simultaneously until a blue light on the device comes up.
7. Connect the device to the PC using USB cable and flash it using fastboot. For that open Command*Prompt*from the fastboot directory and execute the following commands
fastboot flash boot kernel.elf/boot.img
fastboot reboot
8. Enter the Recovery Mode by pressing Volume button several times as soon as the FreeXperia logo is shown with an Amber light.
9. From the Recovery Menu choose install zip from SD Card and select the ROM file downloaded and saved to the SD card in step 3.
10. Repeat step 9. This time select the Google Apps Package.
11. Once the installation is finished. Select go back to open the Main Menu.
12. Now select wipe data/factory reset. Confirm it to wipe the data completely.
13. Once the data wipe is complete, select Reboot System Now from the Recovery Menu.
That's it..... You're good to go now.
Sent from my Xperia SL using Tapatalk 2

Look here:

Can I use this on my ICS 4.0?Or I need to be on 4.1.2?
What is the nickname of Xperia S?

X.DragonSlayer.X said:
Can I use this on my ICS 4.0?Or I need to be on 4.1.2?
What is the nickname of Xperia S?
Click to expand...
Click to collapse
NOZOMI

What's about CM10.1??

What was wrong with the instructions given by FXP in the development thread...
FXP said:
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM10 RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
Click to expand...
Click to collapse
How about looking up this thread by DooMLoRD on everything you need to know about the xperia S
or any of the guides from this thread. ALL-IN-ONE thread
I am sure that your only trying to help users. However having multiple threads across different phone forums repeating the same information provided by the ROMs developer could be seen as an attempt to pad your stats to apply for a Recognized Contributor.
As talked about here by Pandemic (and others if you read the thread) in your Xperia Neo thread
Pandemic said:
i think yes because he is begging for thanks bro
Click to expand...
Click to collapse
Please search before creating new threads with duplicate information, reported for closing
Thanks
~Jaramie

Thread closed. There is already one which covers the subject.

Related

How to put CyanogenMod on your Xperia device

I will be telling you how to put CM 10 on your device without root, as root will automatically come to your device when you are done with CMing. This method works for every phone. I used FXP208-cm-10-20130223-UNOFFICIAL-anzu.zip for my Xperia Arc LT15i. Just check under the project status tab if you want to know if your device is supported. You can also use CM 9, 8 or 7 if you like, the method is the same. Please consider the fact that that this will void your phone's warranty. (Who cares?)
Note:
You do not need root for this.
You need to unlock your phone's bootloader for this.
Downloads:
Fastboot mediafire.com/?47eu9m848c5wbi0
CyanogenMod freexperiaproject.com
Google Apps goo.im/gapps/gapps-jb-20120726-signed.zip
Sorry I could not put links... I am not new to Android and CM but I am new to xda so they did not let me put links
Instructions:
1. Extract the CyanogenMod zip and Fastboot zip files to a convenient location.
2. Copy boot.img from the CM folder to the Fastboot folder. There should now be 5 files in the Fastboot folder.
3. Connect your phone to your computer as you normally would.
4. Place Google apps and CM on the root of your SD card in .zip file format.
5. Disconnect your phone and reconnect in fastboot mode. Just search Google for how to connect phone in Fastboot mode.
6. Go to the Fastboot folder. Open a command window and hold the shift button and right-click.
7. Select the " Open command window here " option.
8. Type
Code:
fastboot flash boot boot.img
The boot image will be flashed to your phone. Disconnect your phone from PC
9. Boot your phone. When the FreeXperia logo comes press the back button like CRAZY until your phone goes into ClockworkMod recovery.
10. Go to advanced. Select 'wipe dalvik cache' and select yes.
11. Go back to main menu and select 'wipe data/factory reset' and select yes.
12. At the main menu select 'wipe cache partition' and yes.
13. Go to mounts and storage and select 'format /system'.
14. From the main menu select 'reboot system now'
15. Setup your phone.
16. Install updates.
17. Enjoy.
If you found this post helpful then please press the thanks button on the left
Or, you could've just flashed a pre-rooted kernel like Advanced Stock.
There's a video in my Arc guide too explaining how to install CM.
Sent from Myushi
MarcSinger said:
Or, you could've just flashed a pre-rooted kernel like Advanced Stock.
Click to expand...
Click to collapse
Here we are trying to CM, not root.
KabbageX said:
Dude, here we are trying to CM, not root.
Click to expand...
Click to collapse
Yes, NOW you are. AFTER you edited your post, in which you clearly mentioned having problems with rooting and cited this as a method of rooting your device/getting CM10 installed. Besides, there's already a detailed tutorial on installing Cyanogenmod on their own website:
http://wiki.cyanogenmod.org/w/Install_CM_for_anzu
MarcSinger said:
Yes, NOW you are. AFTER you edited your post, in which you clearly mentioned having problems with rooting and cited this as a method of rooting your device/getting CM10 installed. Besides, there's already a detailed tutorial on installing Cyanogenmod on their own website:
http://wiki.cyanogenmod.org/w/Install_CM_for_anzu
Click to expand...
Click to collapse
He is new to forum and excited.Give hime a break.
MarcSinger said:
Yes, NOW you are. AFTER you edited your post, in which you clearly mentioned having problems with rooting and cited this as a method of rooting your device/getting CM10 installed. Besides, there's already a detailed tutorial on installing Cyanogenmod on their own website:
http://wiki.cyanogenmod.org/w/Install_CM_for_anzu
Click to expand...
Click to collapse
Ok
Very Helpful
Allow me to change step #17 to:
17. Download Swapper2 and install.
and NOW #18. Enjoy
AdibSul said:
Very Helpful
Allow me to change step #17 to:
17. Download Swapper2 and install.
and NOW #18. Enjoy
Click to expand...
Click to collapse
I am glad I could help.

[Guide] How To Install / Flash Custom Roms Step by Step | Noobs Easy Way | Xperia S

Complete Beginners Guide To Flash Custom ROM on Xperia S | 2011 Devices
This Guide Is Made Easier To Understand The Basics To Install / Flash Custom ROM (Specifically On Xperia Phones). You will not need to go to any annoying links and go on reading lengthy descriptions everything required is provided here. :victory:
Everything is Step By Step.
Just Follow Them And Everything Will Work Fine
Now Lets Get Down To Business.
​
This Tutorial is Specially For
For Complete Beginners
For Newcomers to Android
For Those Who Want To Learn Flashing ROM Easy Way
People who did not had any encounters with Programming
Click to expand...
Click to collapse
Thanks To All The Senior Developers For Providing Us The Knowledge In Developing Modding And Flashing And Amazing Guides Through Out XDA Forum. Without You People This Guide Would Not Have Been Complete
Click to expand...
Click to collapse
This Guide Is Covered in Next 4 Posts With Every Step As Described Below.
NOTE : I Will Explain This Thread For Flashing Custom ROM Cyanogenmod 10 for Xperia S.
Link here---> https://sites.google.com/site/projectfreexperia/
You can download any Stable ROM The Procedure is Same For All.​
Step by Step Process Tree
Step 1. Rooting Xperia S​Step 2. Unlocking Bootloader​Step 3. Installing CWM Recovery​Step 4. Flashing A Custom ROM​Step 5. That's it! You will Have The Custom Rom Running.​
Click to expand...
Click to collapse
Step 1 : Rooting Your Xperia S
Step 1 : Rooting Your Xperia S
This is done by Using A Root Tool Provided by Our Senior Developer @Bin4ry. Please Press His Thanks Button For Helping Out For The Amazing TooL!
Just Download The Tool By Clicking Here : Root_with_Restore_by_Bin4ry_v30
For Xperia S 2.55 Firmware look in this thread: http://forum.xda-developers.com/show...php?p=39498268
But Don't Start Running The Tool Yet. Before That you need to Do A Couple Of Things, :angel:
Before Rooting What You Need?
1.) Install Your Phones Software Driver, ---> PC Companion Will Do The Job Just Connect The Phone And Check If It Detects!
2.) Activate USB Debugging, Setting ---> Developer Options
3.) Activate Unknown Sources, Setting ---> Security
4.) Connect Your Phone via USB
5.) Confirm That Your Device Is Connected Properly In Device Manager.
Only Then,
6.) Proceed With Rooting Tool Kit.
Click to expand...
Click to collapse
How To Use It?
1.) Download Attached File.
2.) Extract it Using Winrar
3.) Double click the RunMe.bat and follow instructions!
Xperia phones with "older" firmware = Normal mode
Sony Tablet and similar = Special mode
Xperia phones with JB Firmare = Mode 3 (Goroh_kun mode)
Click to expand...
Click to collapse
Complete Video Tutorial: https://www.youtube.com/watch?v=7EpkrCq1gfM
Just Follow The On Screen Instructions. (Its really easy like installing a game :laugh
After The Software Finishes Its Work! Your Phone Must BE Rooted By Now!
Step 2 : Unlocking Bootloader on Xperia S
Step 2 : Unlocking Bootloader on Xperia S
Procedure To Unlock Bootloader of Sony Xperia S LT26i :
1.) Installation of Fastboot USB Drivers (Xperia S)​2.) Unlocking Bootloader of Xperia S​
Click to expand...
Click to collapse
Now, We Will Unlock The Bootloader,
Why to Unlock Bootloader?
1.) You can flash custom ROMs/Kernels
2.) You don't need to worry if the new firmware can be rooted or not as with unlocked bootloader u can always ROOT Your device
[ Before We Begin Unlocking Bootloader ]
Get the IMEI code for ur device: type *#06# in phone dialer to find it out, note only the digits (no dashes)
Make Sure The Fastboot Drivers Are Installed.
Make sure u have a windows PC with USB cable to connect the phone
Power down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will trigger FASTBOOT mode and windows
Will start driver installation, extract the above package and point the driver install to that location (usb_driver) folder
Once drivers are installed just disconnect cable and power on device.
[ How to Unlock ] (Official Way)
Video Link ---> http://www.youtube.com/watch?v=LRH3pC7MhEA
For better understanding, I highly recommend you to watch the above video along with the instructions below:
1.) Download ‘Fastboot Drivers And Pacakges File For Xperia S’ file from → Here
2.) Extract the file you downloaded above on your PC. You’ll get the following three files:
drivers.zip
fastboot_with_Android_USB_file.zip
3.) Go to: http://unlockbootloader.sonymobile.com/ and read everything!
This will open a web page in your default browser. Scroll to the bottom of the Instructions on the page and you’ll see a link like “Continue”, click on it.
In the pop-up window click “Yes, I’m sure” and then in the next window click on both the checkboxes, and then click “I accept”.
4.) Now insert the details as per the instructions:
First 14 digits of your IMEI No. Do NOT enter the last digit (15th) in the box. To know your IMEI No. dial *#06# on your Xperia Arc.
Your Name
Your Email Address
Click Submit.
5.) You’ll get a KEY to unlock boot loader. Write it down somewhere you can remember, it will be used later.
6.) Switch off your phone.
7.) Now extract the “fastboot_with_Android_USB_file.zip” file you got in Step 2.2.
8.) Pick up your phone (it must be switched off) and hold the “Menu” button (the key at the bottom right of your phone), now while holding the “Menu” button connect your phone to your PC with an USB cable.
9.) Once connected — the LED light near the phone’s USB plug will turn blue. If it doesn’t — repeat the Step 8.
10.) Now to install the drivers do the following:
Extract the “drivers.zip” file you got in Step 2.1
Open “Device Manager” on your PC and look for “S1Boot Fastboot” under the head “Other devices”
Right-click on “S1Boot Fastboot” and select “Update Driver Software…”
Now select “Browse my computer for driver software” and select the folder where you’ve extracted all the three files you got in Step 2. Once done — click Ok.
Now click Next (Make sure you’ve ticked the “Include subfolders” checkbox).
If you see any Windows security warning box, don’t worry . Just select “Install this driver software anyway”
Wait for “Windows has successfully updated your driver software” message to appear on your screen. Now click Close.
11.) Open the “fastboot” folder from the file we extracted in Step 7.
12.) Now hold Shift and press mouse right click (Shift + Mouse Right Click) anywhere on the empty white space inside the “fastboot” folder. And then select “Open command window here” from the context menu.
13.) Now in the command prompt window type/paste the following:
fastboot.exe -i 0x0fce getvar version​
14.) It should return a value like “0.3”. This ensures that your device is correctly connected.
15.) Now type/paste the following line in the command prompt window:
fastboot.exe -i 0x0fce oem unlock 0xKEY​
IMPORTANT! Replace the word “KEY” from the above line with the KEY that you received in Step 5. Then Hit Enter.
Click to expand...
Click to collapse
16.) Now wait for the process to complete. Command prompt will show a “Finished” message when it will be completed.
17.)Once it’s done, disconnect the USB cable from your phone and switch it ON.
18.)Your phone’s boot loader should now be Unlocked.
(The above videos and some steps are for Xperia 2011 devices, but most the steps are same for Xperia S/P/U/Sola)
Click to expand...
Click to collapse
Step 3 : Installing ClockWorkMod Recovery With RoceoverX
Step 3 : Installing ClockWorkMod Recovery With RoceoverX
We Will Install Recovery Using RecoverX Software.
Download The Software from Here ----> RecoverX v1.6.8.0
You just have to select your device and the recovery, click "Install" and RecoverX does the rest !!! It's that simple!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4 : Flashing ROM
Step 4 : Flashing ROM
Assuming you have already downloaded your required file, let’s proceed.
ROM Flashing
1.) Copy Paste update on Phone
Copy update- copy update-xxx-xxx-xxx.zip coresponding to your device to sdcard
Copy GAPPS. Download Link [Here]
2.) Flash CM kernel
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img (Extract The boot.img file from zip)
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.​
Click to expand...
Click to collapse
3.) Boot into Recovery
While FXP logo is displayed (and lights are lit) press several times volume up to enter CWM (recovery)
4.) Flash ROM
To update main rom select
Install zip from sdcard
Choose zip from sdcard
Select your update (copied at step 2)
To flash gapps redo steps a-c and select gapps package
Use gapps version designed for your android version !!! Link ---> Here, Gapps
5.Wipe device
Whip Cache
Whip Dalvik Cache (Advanced Option)
Cache Partition
If after boot you experience ForceClose then is recomended to reboot to recovery and wipe device​
Click to expand...
Click to collapse
6.) Partition format
7.) Reboot and Enjoy :victory:
Troubleshooting
If you experience a bootloop (phone constantly reboots and reboots on the boot screen) or a soft brick (powering on the phone shows an orange triangle with a phone and computer), don’t be afraid. XDA to the rescue!
For a bootloop:
Hold The Power Button And Volume Up Button
If You Hold For 3 Seconds = Soft Reset = 1 Viberation
If You Hold For 10 Seconds = Hard Reset = 3 Viberations***
Power on the Phone Again, Keep pressing Volume Up Button
Your phone will boot into recovery.
Select “Wipe data/ Factory reset”. (Volume Up for going up and Volume down to go down)
After the reset is done, select “Reboot system now”.
The phone will reboot and you should be all fine.
***Do Not Try Hard Reset Untill And Unless The Phone is Facing Major Problems,
For a soft brick:
You probably flashed some faulty firmware or firmware not meant for your device.
The File You Downloaded Must Be Incomplete.
Download the correct firmware and flash again.
Feedback And Corrections
Please Feel Free To Message Me About Any Dead Links Or Corrections​
Feedbacks Are Welcome!​​
Which is the best way to flash / install a custom ROM / gapps ? With Flashtool or through TWRP / CWM ?
I'm now on stock ROM, Xperia ZL. Do i have to wipe / factory reset / cache / Dalvik cache if i use TWRP ?
Every advice is welcome, thank you
xperia s 2013 jelly bean
I have a question for xperia s jellybean 4.1.2 , i already root it using some other easy method and i wanna know how to flash rom on to that , i have no idea how to flash a rom and i m scared if i try this something might happen so i m asking for help?:laugh:
I know its ment to be straight forward but I have become stuck...
In step 4 - "Click 6/7" when using the Xperia Flasher where do I find the boot.img i need to put on my phone?
Thanks
---------- Post added at 01:37 AM ---------- Previous post was at 12:45 AM ----------
chuckie987 said:
I know its ment to be straight forward but I have become stuck...
In step 4 - "Click 6/7" when using the Xperia Flasher where do I find the boot.img i need to put on my phone?
Thanks
Click to expand...
Click to collapse
It would appear the ROM i downloaded didnt have a kernel.img but now i have a differant ROM and it has a boot.img so all good again!
Can i follow this method on xperia sl and also can i flash xperia s roms to xperia sl.....my boatloader is unlocked but phone isnt rooted so i guess i will skip unlock boatloader method.....which kernel should i flash for slimbean 4.3...it will be great help if someone answer these questions
Please Help
Hi, I searched a lot for the way to flash a custom rom on my Xperia S. But now halfway through, I've got a problem. My device says it does not allow to unlock bootloader, so does that mean that there is no way I can flash a custom rom on my phone? :crying:
mjk123 said:
Hi, I searched a lot for the way to flash a custom rom on my Xperia S. But now halfway through, I've got a problem. My device says it does not allow to unlock bootloader, so does that mean that there is no way I can flash a custom rom on my phone? :crying:
Click to expand...
Click to collapse
You can use only Stock based ROM for locked bootloaders, not the unlocked bootloaders one.
This is very nice thread. For begginers like me in the rooting this.... loved it. i wast to ask a question
can we flash any zip file using flashtool or there are onle few specific files?
mr.sky10295 said:
This is very nice thread. For begginers like me in the rooting this.... loved it. i wast to ask a question
can we flash any zip file using flashtool or there are onle few specific files?
Click to expand...
Click to collapse
You cannot flash .zip files using flashtool. You can flash only Firmwares or kernel files using flashtool.
Mirhawk said:
You cannot flash .zip files using flashtool. You can flash only Firmwares or kernel files using flashtool.
Click to expand...
Click to collapse
ohh...then is there any other method to flash zips otherthan going into recovery?
i am asking because my recovery is not working. when i go into recovery, blank black screen comes up. and it gets stuck there. i waited for very long time to make sure that it is stuck
mr.sky10295 said:
ohh...then is there any other method to flash zips otherthan going into recovery?
i am asking because my recovery is not working. when i go into recovery, blank black screen comes up. and it gets stuck there. i waited for very long time to make sure that it is stuck
Click to expand...
Click to collapse
Which recovery are You using? The 2.8.1.0? It doesn't work with Xperia S. Use the 2.8.0.1 version.
Mirhawk said:
Which recovery are You using? The 2.8.1.0? It doesn't work with Xperia S. Use the 2.8.0.1 version.
Click to expand...
Click to collapse
Wait i will let you know the complete story.
so what happened is
first i was on CM11 for few mnths then switched to MIUIv5 for 1 month. everything was working fine
but when day before yesterday i flashed PA rom i am not able to access the recovery now (previously there was TWRP in my XS). now i can't flash any zip file
when i reboot to recovery it gets stuck on black blank screen. Even the recovery apps like twrp are not working. when i tried to install recovery through app, the app crashes.
As recovery is not working i cant even switch to other roms or any zip file.
i am totally stuck on this ROM
i asked this que on sony mobile group on FB (created by some sony fans), one of the member said "probably this is not ROM fault but the kernel fault. consider trying new kernel"
mr.sky10295 said:
Wait i will let you know the complete story.
so what happened is
first i was on CM11 for few mnths then switched to MIUIv5 for 1 month. everything was working fine
but when day before yesterday i flashed PA rom i am not able to access the recovery now (previously there was TWRP in my XS). now i can't flash any zip file
when i reboot to recovery it gets stuck on black blank screen. Even the recovery apps like twrp are not working. when i tried to install recovery through app, the app crashes.
As recovery is not working i cant even switch to other roms or any zip file.
i am totally stuck on this ROM
i asked this que on sony mobile group on FB (created by some sony fans), one of the member said "probably this is not ROM fault but the kernel fault. consider trying new kernel"
Click to expand...
Click to collapse
If You are on Beta 6 of PA, it doesn't have twrp or cwm. Flash the twrp v2.8.0.1 by terminal emulator method.
Mirhawk said:
If You are on Beta 6 of PA, it doesn't have twrp or cwm. Flash the twrp v2.8.0.1 by terminal emulator method.
Click to expand...
Click to collapse
i am on PA 4.6 BETA4
terminal emulator means the android app or PC's cmd?
PS: sorry giving you too much trouble by asking stupid questions. but i dont have much knowledge about this things deeply. so kindly bear me for some time.
mr.sky10295 said:
i am on PA 4.6 BETA4
terminal emulator means the android app or PC's cmd?
PS: sorry giving you too much trouble by asking stupid questions. but i dont have much knowledge about this things deeply. so kindly bear me for some time.
Click to expand...
Click to collapse
Ah yes, even that one doesn't have recovery.
Unlocked bootloader is must.
You need an Android app. You can find the app here. Also, here is the page of the twrp.
What You need to do is, download the twrp from here. Rename it to fotakernel.img .
Then copy it to Your sdcard.
Then run the following commands on the terminal emulator app:
Code:
su
dd if=/sdcard/fotakernel.img of=/dev/block/mmcblk0p11
TWRP installed!

[Q] Sony Xperia ZL / root

I tried many times to root the phone, unfortunately i couldn't.
Special thanks to user destroyedbeauty, he adviced my ( in PM ) step by step how to do it, but still no success.I followed the steps very careful.
When i tried to root, i didn't check USB Debugging & Unknown Sources.
Should i ?
Is there a way to install apps which require root, on the phone with no root ?
Below are the steps i tried to root the phone, adviced by the mentioned user.
I rather recommend that you install an kernel with pre-configed root access (Doomkernel / Advanced Stock kernel / XzK-kernel) by using built-in Fastboot in Flashtool. By doing this method, do this!!!:
1) Download kernel ZIP from specific kernel thread in "Xperia Z (Original) Android Development" thread section. Take anyone of these below, I also link Advanced Stock Kernel if you want complete stock Sony kernel with added init.d / root / recovery add-on / built-in!;
a) Xz-Gaming v1.0
b) XzK-Kernel v11.0
c) Doomkernel v19
d) AdvancedStockkernel
OBS!! Choice latest kernel from list in each thread for getting latest kernel that is optimized and made for your installed FW. Otherwise, problems can occur..
2) Extract boot.img from downloaded ZIP and put boot-file in Flashtool > Firmwares. After this, copy the same zip to your phone external / internal-SD card. Leave it there and continue read..
3) Turn off your phone and hold volume up, then connect phone to USB-cable. Keep an eye on LED notify lamp, see if it blinking blue - then you're connected in fastboot mode between phone and PC!
4) Open up Flashtool and push on the "Bolt-Button". Select fastboot, then go to firmware subfolder in your Flashtool folder on HDD and select extracted boot.img. Read log in flashtool, read it carefully. If everything seems to be normal, disconnect your phone and boot it up.
5) Go into recovery mode by either hammering volume up / volume down button and then choice "Install ZIP" option. Search after your ZIP file in recovery that contains boot.img and wifi-specific modules (critical for getting working WIF / Bluetooth!!).
6) After completed flashing, wipe cache and Dalvik cache (Dalvik can be found under Advanced section in recovery).
7) Reboot and voilá! Enjoy your custom kernel!
I only tried with "AdvancedStockkernel"
After step 4, the display stays black, nothing happent, no boot, no Sony logo, nothing.
I want to mention one more think : when i unlocked the bootloader 2 days ago, i followed this link :
http://unlockbootloader.sonymobile.com/
It was successful.On the next step I was asked to write my email / imei / etc !!! Everything went ok.
After that, i tried to root and something went wrong, so i flashed whole .67 FTF in flashmode, again. Now is stock
Is the bootloader still unlocked, after i flashed .67 ftf in flashmode ? Could that be the reason i can't root the phone ?
Should i try again to unlock the bootloader, before i start again to root ?
Please help me guys.
Thank you
nex_t said:
I tried many times to root the phone, unfortunately i couldn't.
Special thanks to user destroyedbeauty, he adviced my ( in PM ) step by step how to do it, but still no success.I followed the steps very careful.
When i tried to root, i didn't check USB Debugging & Unknown Sources.
Should i ?
Is there a way to install apps which require root, on the phone with no root ?
Below are the steps i tried to root the phone, adviced by the mentioned user.
I rather recommend that you install an kernel with pre-configed root access (Doomkernel / Advanced Stock kernel / XzK-kernel) by using built-in Fastboot in Flashtool. By doing this method, do this!!!:
1) Download kernel ZIP from specific kernel thread in "Xperia Z (Original) Android Development" thread section. Take anyone of these below, I also link Advanced Stock Kernel if you want complete stock Sony kernel with added init.d / root / recovery add-on / built-in!;
a) Xz-Gaming v1.0
b) XzK-Kernel v11.0
c) Doomkernel v19
d) AdvancedStockkernel
OBS!! Choice latest kernel from list in each thread for getting latest kernel that is optimized and made for your installed FW. Otherwise, problems can occur..
2) Extract boot.img from downloaded ZIP and put boot-file in Flashtool > Firmwares. After this, copy the same zip to your phone external / internal-SD card. Leave it there and continue read..
3) Turn off your phone and hold volume up, then connect phone to USB-cable. Keep an eye on LED notify lamp, see if it blinking blue - then you're connected in fastboot mode between phone and PC!
4) Open up Flashtool and push on the "Bolt-Button". Select fastboot, then go to firmware subfolder in your Flashtool folder on HDD and select extracted boot.img. Read log in flashtool, read it carefully. If everything seems to be normal, disconnect your phone and boot it up.
5) Go into recovery mode by either hammering volume up / volume down button and then choice "Install ZIP" option. Search after your ZIP file in recovery that contains boot.img and wifi-specific modules (critical for getting working WIF / Bluetooth!!).
6) After completed flashing, wipe cache and Dalvik cache (Dalvik can be found under Advanced section in recovery).
7) Reboot and voilá! Enjoy your custom kernel!
I only tried with "AdvancedStockkernel"
After step 4, the display stays black, nothing happent, no boot, no Sony logo, nothing.
I want to mention one more think : when i unlocked the bootloader 2 days ago, i followed this link :
http://unlockbootloader.sonymobile.com/
It was successful.On the next step I was asked to write my email / imei / etc !!! Everything went ok.
After that, i tried to root and something went wrong, so i flashed whole .67 FTF in flashmode, again. Now is stock
Is the bootloader still unlocked, after i flashed .67 ftf in flashmode ? Could that be the reason i can't root the phone ?
Should i try again to unlock the bootloader, before i start again to root ?
Please help me guys.
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45974001 try this. For rooting you just need to check uknown sources and usb debugging mode
Sent from my C6502 using xda app-developers app
coolrevi said:
http://forum.xda-developers.com/showthread.php?p=45974001 try this. For rooting you just need to check uknown sources and usb debugging mode
Sent from my C6502 using xda app-developers app
Click to expand...
Click to collapse
Thanks a million, it was working. Now my phone is rooted, bootloader unlocked, and i want to install a CWM / TWRP custom recovery.
Would you please explain it to me how i have to proceed ?
Thank you.
nex_t said:
Thanks a million, it was working. Now my phone is rooted, bootloader unlocked, and i want to install a CWM / TWRP custom recovery.
Would you please explain it to me how i have to proceed ?
Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=40977606
Everything you need is in development section dude.. It's better to search instead of typing so much. Remember. just follow the procedure exactly..
Sent from my C6502 using xda app-developers app

[Q] Help unlocking bootloader, root and flash.

Hello guys, i have a xperia ZQ C6503 Brazil, i want to unlock the bootloader , install a recovery and a stable cyanogen mod , but the cyanogen installer shows the device is not supported ( they are not equal the ZL ? ) , i want a correct step-by-step for this things i want, i am confused with tons of topics with differents things..
So i want a how-to Unlocka bootloader, install a custom recovery, how to root, and how to install the cyanogen mod without the windows installer if possible. thanks.
ZQ it's exactly the same of ZL, I don't know why Brasil changed the name, I have a ZQ and installed the cyanogenmod 11 for ZL and everything works, don't worry about that. I can see you're a little insecure, so I suggest READING MORE TOPICS. And make sure that you're installing everything for xperia ZL (ODIN) and not for the Z (yuga) or Z1.
First: read this .. http://forum.xda-developers.com/showthread.php?t=2201148 READ EVERYTHING, DOOMLORD IT'S THE MAN !
AFTER READING DOOMLORD'S TOPIC: IF it's not clear, you can read http://techglen.com/2013/11/28/install-android-4-4-kitkat-on-xperia-zl-with-cm-11/# and http://wiki.cyanogenmod.org/w/Install_CM_for_odin
Suggestion: Use flashtools to install the custom kernel (connect the phone in fastboot mode, click on the lightning, choose fastboot mode and choose install/flash custom kernel) it's way easier than using terminal.
After installing adb drivers, sony drivers, fastboot drivers, and etc ...
1) unlock bootloader
2) download the last cm11 nightly and google apps for android 4.4.2 (search on the cyanogen site)
3) on the phone: put the .zip on the root of sdcard ........... on the pc: extract the .zip on desktop (you're just gonna use boot.img)
4) shutdown the phone, plug the cable on the phone pressing VOLUME UP ( + ) , a blue led should appear
5) open flashtools, click on the lightning and choose fastboot mode, after choose install/flash custom kernel and choose the boot.img that you placed in the desktop
6) Unplug the cable and reboot the phone (or it'll reboot by itself) WHEN SONY LOGO APPEARS (A PINK LED WILL APPEAR, this is the phone telling you that you can press volume up (+) to open recovery), so, when the pink led appear push the volume up (+)
7) Now you're in clockworkmode recovery, wipe cache/data/dalvik, flash the rom, flash the gapps, flash the supersu.zip(if you want it rooted)
8) Reboot (it may take a while, up to 5 minutes)
9) Have fun
Rafael Luis said:
ZQ it's exactly the same of ZL, I don't know why Brasil changed the name, I have a ZQ and installed the cyanogenmod 11 for ZL and everything works, don't worry about that. I can see you're a little insecure, so I suggest READING MORE TOPICS. And make sure that you're installing everything for xperia ZL (ODIN) and not for the Z (yuga) or Z1.
First: read this .. http://forum.xda-developers.com/showthread.php?t=2201148 READ EVERYTHING, DOOMLORD IT'S THE MAN !
AFTER READING DOOMLORD'S TOPIC: IF it's not clear, you can read http://techglen.com/2013/11/28/install-android-4-4-kitkat-on-xperia-zl-with-cm-11/# and http://wiki.cyanogenmod.org/w/Install_CM_for_odin
Suggestion: Use flashtools to install the custom kernel (connect the phone in fastboot mode, click on the lightning, choose fastboot mode and choose install/flash custom kernel) it's way easier than using terminal.
After installing adb drivers, sony drivers, fastboot drivers, and etc ...
1) unlock bootloader
2) download the last cm11 nightly and google apps for android 4.4.2 (search on the cyanogen site)
3) on the phone: put the .zip on the root of sdcard ........... on the pc: extract the .zip on desktop (you're just gonna use boot.img)
4) shutdown the phone, plug the cable on the phone pressing VOLUME UP ( + ) , a blue led should appear
5) open flashtools, click on the lightning and choose fastboot mode, after choose install/flash custom kernel and choose the boot.img that you placed in the desktop
6) Unplug the cable and reboot the phone (or it'll reboot by itself) WHEN SONY LOGO APPEARS (A PINK LED WILL APPEAR, this is the phone telling you that you can press volume up (+) to open recovery), so, when the pink led appear push the volume up (+)
7) Now you're in clockworkmode recovery, wipe cache/data/dalvik, flash the rom, flash the gapps, flash the supersu.zip(if you want it rooted)
8) Reboot (it may take a while, up to 5 minutes)
9) Have fun
Click to expand...
Click to collapse
God bless u, haha thanks a lot dude, i will read all these stuff and try to install de cyanogen thanks !

[Q&A] [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.

[Q&A] [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.
Q&A for [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.1)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Guide] [XAS] Xperia Unlocking bootloader, flashing ROMs/kernels (BPaul's 5.1.1). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Very cool explanation
hitman-xda said:
This is a guide for XPERIA ACRO S (other xperia users can also reffer needed information)
[Below procedure looks lendy, but you'll just need max 30 minutes if you have every downloaded file.]
I make this guide for noobs as there weren't such guide (even for my first time of flashing ROM I didn't get any such guide, so I decided to make one)
This Guide is especially for flashing BPaul's 5.1.1 ROM
So here Iam giving detail process to install Bpauls 5.1.1 with every links needed.
we are going to take below steps;
1. unlocking bootloader
2. flashing kernel with recoveries
3. backing up stock rom
4. installing bpauls 5.1.1
Special Thanks;
@BPaul (for awesome ROM)
@cobrato (for stock kernel)
@jajb (for gapps)
NOTE: I'AM NOT RESPONSIBLE IF YOU DAMAGED YOUR PHONE BY CROSS FLASHING OTHER ROMS,KERNELS ETC.
BELOW PROCESS IS SUCCESSFULLY CARRIED ON XPERIA ACRO S. AS NOOBS CAN MAKE MANY MISTAKES
I'AM NOT RESPONSIBLE FOR YOUR DAMAGE. -DO AT YOUR OWN RISK-
-Here we START-
*_UNLOCKING BOOTLOADER_*
(unlocking bootloader will erase everything on your phone, i suggest you to take backup of your data)
First of all you need to take unlocking code from official sony website (link below)
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
after clicking on above link, on the page just scroll down
1.select your device
2.provide your imei
3.you'll get unlock code (save it properly)
Next you need to download minimal adb and fastboot (link below)
https://drive.google.com/file/d/0B1S0LCuXCnnmOWhnUk1ZWVdQakE/view?pli=1
install it to your computer.
Now we have to connect phone in fastboot mode, follow below steps
1.Turn on usb debugging mode.
(setting > developer option > usb debugging)
2.Turn Off your Xperia Acro S
3.Press and Hold volume up button and then connect usb to computer.
(If you see Blue LED of phone, then everything is going right)
(Let your computer install essential fastboot drivers)
Now open minimal adb and fastboot (we installed previosly)
Type below command
-fastboot devices
-fastboot -i 0x0fce oem unlock 0x(your unlock code without this brackets)
-fastboot reboot
DONE
(Now you have successfully unlocked your bootloader)
*_FLASHING KERNEL WITH RECOVERY'S_*
As you have STOCK ROM, you need to flash STOCK KERNEL with recoveries (link below)
http://forum.xda-developers.com/showthread.php?t=2309117
-The above kernel cantain CWN as well as TWRP
After opening above link, download respective kernel
Save the above downloaded kernel to fastboot folder on your computer.
-Get into fastboot mode and connect to computer.
(Press and Hold volume up button and then connect usb to computer).
Now open minimal adb and fastboot (we installed previosly)
Type below command
-fastboot devices
-fastboot flash boot kernel_62B196_acroS.elf
-fastboot reboot
DONE
(Now you have successfully flashed kernel with recovery)
*_BACKINGUP STOCK ROM_*
As you have successfully flashed kernel with recoverys, its easy to take a full backup of your system.
To enter into recovery follow below steps
1.To get into CWM reboot your phone, press volume up key for few times when the magneta LED appears.
(To navigate use volume buttons, for selecting use power button)
2.To get into TWRP reboot your phone and tap the screen for few times when the magneta LED appears.
3.Select Backup.
DONE
(Now you have successfully Backedup your ROM)
*_FLASHING ROM BPaul's 5.1.1_*
For Flashing This ROM your phone (Xperia Acro S) needs to be rooted (if your not, use towelroot app, for me it was the easiest way to root my phone)
and USB Debugging in developers option should be enabled.
A] Download ROM BPaul's 5.1.1 (link below)
http://forum.xda-developers.com/showthread.php?t=2799765&page=54#post60570826
-Extract the above downloaded ROM to your computer
(you'll see 2img files and 2recoveries)
B] Here you need to download acro s kernel (link below)
http://d-h.st/nJXM
C] Download below minimal GApps for 5.1.1 and copy it to your sdcard/ext_sdcard(link below)
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
(keep this downloaded kernel to above extracted folder)
Now to flash this rom you need to download FLashtool (link below)
http://d-h.st/Kb8
install the above downloaded Flashtool to your computer.
1.Now to flash recovery open the extracted ROM, and open recovery folder (2recoveries)
2.Pick your Recovery CWM or TWRP (TWRP Recommended) and copy it to internal storage of your phone.
3.Open minimal adb and fastboot
Type below command;
-adb shell
-su
(confirm popup su request from your phone)
-dd if=/sdcard/twrp.img of=/dev/block/mmcblk0p11 OR dd if=/sdcard/cwm.img of=/dev/block/mmcblk0p11
Now you need to flash 2img files, to do so follow below steps
1.Open Flashtool
2.Click Flash button (Lightning icon, top left)
3.Select Fastboot mode
4.Reboot phone to fastboot (power off phone>push vol up key and connect usb)
5.Now in flashtool select SYSTEM to flash and open system.img (wait for 6 minimum minutes)
6.Now select KERNEL to flash and open boot_07_05_15.img
7.Now select REBOOT DEVICE INTO SYSTEM.
8.Open your respected recovery (CWM or TWRP)
9.Install>your downloaded gapps from sdcard/ext_sdcard
10.Wipe cache + Dalvic cache + Factory reset
11.Reboot
(Optional) : For rooting this ROM, just download SU, save it to your phone and install it manually with recovery. (link below)
http://download.chainfire.eu/supersu
For the first time it can take a looooong time to boot up. So just don't worry.
DONE
(You have successfully installed BPaul's 5.1.1)
Click to expand...
Click to collapse
Explain the unique and wonderful brother, thank you
But there is a point I can't understand, come on for
Install the kernel
Put a link to the kernel and you try to access the file to download
They found three links and no! know which is better or more correct for installation
Thank you for all your explanations about the wonderful but if it is possible to make a video for us to install the ROM I was very thankful to you
A point I would like to inquire of the installation steps that I have created on installation after the formal system of the machine or from another custom
And you have to work the manure and how it works
I hope I haven't she disturbed you thanks
Wait for response from you, since I'm a wait to install this ROM
Great job thank you
THEGAME2 said:
Explain the unique and wonderful brother, thank you
But there is a point I can't understand, come on for
Install the kernel
Put a link to the kernel and you try to access the file to download
They found three links and no! know which is better or more correct for installation
Thank you for all your explanations about the wonderful but if it is possible to make a video for us to install the ROM I was very thankful to you
A point I would like to inquire of the installation steps that I have created on installation after the formal system of the machine or from another custom
And you have to work the manure and how it works
I hope I haven't she disturbed you thanks
Wait for response from you, since I'm a wait to install this ROM
Great job thank you
Click to expand...
Click to collapse
Dude if you are on stock ROM then navigate to
settings > about phone > build number
(Download specific kernel from that three options that matches your build number and flash it)
About video tutorial,
I recently can't provide it because I'm on poor internet connection.
If you do every step carefully, you'll be done!
Let me know if you have any problem
Regards,
hitman-xda

Categories

Resources