Develop Bugs

What Is "Whole-File Signature"???

Ok so the war between me & this damn Sprint Galaxy Nexus continues...
I've been trying to get this update to fully install with no luck...
last night after 6 hours of rumbling the device, flashing wrong files, ending up with Verizon/no sim card/no service then FINALLY getting it fixed and back to stock so I can install the update and I just tried and guess what...
still no luck!!!
this god-forsaken update downloads then turns the device off then the screen with the little android with the blue thing spinning in his belly starts up for about 10 seconds then I get:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
has anyone else gotten the same error when attempting to install the update?
I'm using ClockworkMod 5.8.3.1 and the build is IMM76D.L700FC12
can I download the OTA Update & push it through using the Nexus Toolkit?
any/all help is appreciated!

Bro your in need of some serious help there is a way to flash to stock FD02 which is the latest stock build.... give me a sec to find the how to. Follow that then reflash the radios and then root again.
I'm sure its through Odin so make sure you have a good thick cable not the stock one. Like a blackberry one is one I always suggest.
Sent From My Sprint Galaxy Nexus via XDA Premium
Here you can follow this video : How to Unroot/Unbrick Galaxy Nexus
Once thats done go ahead and unlock the bootloader and all that deal. Root it, then reflash those fixed radios. Then you should be good to go .

ÜBER™ said:
Bro your in need of some serious help there is a way to flash to stock FD02 which is the latest stock build.... give me a sec to find the how to. Follow that then reflash the radios and then root again.
I'm sure its through Odin so make sure you have a good thick cable not the stock one. Like a blackberry one is one I always suggest.
Sent From My Sprint Galaxy Nexus via XDA Premium
Here you can follow this video : How to Unroot/Unbrick Galaxy Nexus
Once thats done go ahead and unlock the bootloader and all that deal. Root it, then reflash those fixed radios. Then you should be good to go .
Click to expand...
Click to collapse
I got the FD02 radio images...is that all the damn update is??
if so I'll just flash them...

broad_st_bully said:
I got the FD02 radio images...is that all the damn update is??
if so I'll just flash them...
Click to expand...
Click to collapse
I think...
Sent From My Sprint Galaxy Nexus via XDA Premium

figured it all out...back to factory condition...

New OTA Firmware update

New OTA Firmware update this morning! Wind mobile finally released a new firmware this morning. 80+MB Download Firmware T999VVLALH2. Just the update with the screen briteness control in the pull dowm notification menu and i see new back buttons on the stock internet browser. amd some security/bug fixes. Finally we get this update it was released to wind mobile / videotron / mobilicity from samsung in the middle of augest and just today it was availible to wind customers ty. I think were one of the last to finally recieve this firmware Pretty said wind mobile!!

This is for Wind? Glad you guys caught up

Wtff i didnt get itt. Its prolly late. It depends where your locaationis right? Some receive it faster than others? Can you still get updates if your rooted? And this is greeattt newss Thanks for the update
Maybe the reason why this was late is because they fixed the browser hack fix that wss discovered few days ago?

aklyrical said:
Wtff i didnt get itt. Its prolly late. It depends where your locaationis right? Some receive it faster than others? Can you still get updates if your rooted? And this is greeattt newss Thanks for the update
Click to expand...
Click to collapse
My phone is rooted, it downloaded the update OTA but CWM failed the integrity check and the update stopped there, the phone wont do it again and says to use KIES now, I'm not home to try.

Yeah ima do kies too. Does it wipe everythinf on ur phoneM

aklyrical said:
Yeah ima do kies too. Does it wipe everythinf on ur phoneM
Click to expand...
Click to collapse
The update states that it will not affect your data, but to backup your phone first anyways.

Hey! You guys got your update! Very cool! Im happy for ya!
And we already know they're working on jb!
Sent from my SGH-T999 using xda app-developers app

I love this guy doc ^ hes always helping
Thanks dudee

Is there a well known way to apply the update on a rooted phone with CWM 5.5.0.4? I'd rather not have to spend the evening figuring out why it failed. I tried it twice and it just says:
E: Invalid command argument
Finding update package...
Opening update package...
Verifying update package...
E: Failed to verify whole-file signature
E: signature verification failed
Installation aborted.

aklyrical said:
I love this guy doc ^ hes always helping
Thanks dudee
Click to expand...
Click to collapse
Thanks! I do what i can! Ive learned a lot from this place and i do like helping out when i can.
cyndro said:
Is there a well known way to apply the update on a rooted phone with CWM? I'd rather not have to spend the evening figuring out why it failed. I tried it twice and it just says:
E: Invalid command argument
Finding update package...
Opening update package...
Verifying update package...
E: Failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Click to expand...
Click to collapse
Check /data/fota or /cache/fota for the downloaded update. If its not herer in settings> about, press Software Update to try to redownload. Copy it to your external sd.
Ive been told cwm touch will flash the ota for you without stock recovery. Never tried it though. I use Mobile Odin Pro. Or you can flash in stock recovery.
You can get voodoo ota rootkeeper on market and protect root before updating. After the update reboot and restore root through the app and you should be good to go.
You wont lose your data but ymmv witb voodoo.
If you want to do a fresh install and start clean you ca download the full fw from sammobile.com/firmware . Use odin or Mobile Odin for this method. Hope that helps!
Sent from my SGH-T999 using xda app-developers app

It would be nice if you updated the title so people knew which carrier.

DocHoliday77 said:
Check /data/fota or /cache/fota for the downloaded update. If its not herer in settings> about, press Software Update to try to redownload. Copy it to your external sd.
Ive been told cwm touch will flash the ota for you without stock recovery. Never tried it though. I use Mobile Odin Pro. Or you can flash in stock recovery.
You can get voodoo ota rootkeeper on market and protect root before updating. After the update reboot and restore root through the app and you should be good to go.
You wont lose your data but ymmv witb voodoo.
If you want to do a fresh install and start clean you ca download the full fw from sammobile.com/firmware . Use odin or Mobile Odin for this method. Hope that helps!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I appreciate the effort, I didn't find the downloaded update anywhere, but using KIES when I got home worked and re-rooting was no issue.

My kies doesn't even "support" upgrade on my phone...

Do you have anything modded on your phone? Even just small build.prop mods could cause incompatibilities. Honestly just guessing here cause I dont ever use kies. Luckily anything ive wanted to flash was available other ways.
@all
If anyone gets the ota update notification on your phone and is willing to do a little extra footwork to help others out, consider doing this please...
Before starting the update, make a copy the ota file. I think its either at /data/fota or /cache/fota, cant remember for sure. But upload it to a file host like dev-host.org or mediafire.com so those who are having problems getting it can have an alternative.
Thanks!
Sent from my SGH-T999 using xda app-developers app

DocHoliday77 said:
@all
If anyone gets the ota update notification on your phone and is willing to do a little extra footwork to help others out, consider doing this please...
Before starting the update, make a copy the ota file. I think its either at /data/fota or /cache/fota, cant remember for sure. But upload it to a file host like dev-host.org or mediafire.com so those who are having problems getting it can have an alternative.
Thanks!
Click to expand...
Click to collapse
This is the Wind Mobile /cache/fota/update.zip that showed up for me yesterday. Paste the next line as a link in your browser, since I can't post external links yet:
d-h.st/dGu
If you want to install it using CWM 5.5.0.4, you will need to turn signature verification off and remove this line from the zip's META-INF/com/google/android/updater-script:
Code:
assert(getprop("ro.product.device") == "d2can" ||
getprop("ro.build.product") == "d2can");
(It's what I had to do. Unfortunately I've been unable to get CWM to reinstall since then, so no root for me until I can figure out why it's doing that.)

Did you try to use voodoo to protect root before installing the OTA? That way you get root back after the update then flash recovery using the gomanager

djide said:
Did you try to use voodoo to protect root before installing the OTA? That way you get root back after the update then flash recovery using the gomanager
Click to expand...
Click to collapse
To my embarrassment, I completely forgot to protect root when going about installing the OTA. So the losing root is just my own damn fault.

g026r said:
To my embarrassment, I completely forgot to protect root when going about installing the OTA.
Click to expand...
Click to collapse
Interesting. I am having similar problems with rooting the jellybean OTA leak for VTR. When I flash the LH2 update, the jellybean leak would flash successfully right after provided I don't flash a new recovery.
The moment I flash a custom recovery and root then protect root and then try to flash the jellybean update, it fails almost immediately during the check process.
Is there any way to disable the OTA from checking and just installing right away?

You can flash OTA updates through CWM 6.6.1.2, but I don't think you can use the OTA updater from About phone if you are using a custom recovery. I will verify this method when the official JB update rolls out. Why don't you just download the OTA zips from sammobile?

g026r said:
(It's what I had to do. Unfortunately I've been unable to get CWM to reinstall since then, so no root for me until I can figure out why it's doing that.)
Click to expand...
Click to collapse
Ah ha! Turning off "Auto reboot" in Odin and then manually rebooting into recovery mode immediately after flashing CWM allowed me to get a new copy of su installed.
It's back to the stock recovery mode after a reboot, but as getting root re-enabled was my main concern I think I can live with it for the time being.

need 317m PIT file for reparititon

hello,
i need the PIT file from a at&t (rogers) 317m @ android 4.3 official. Mine keep crashing every time I try to load a rom, just sits at the samsung galaxy note II screen. Seems that I need to clean reload the phone using ODIN, including a repartition. I already got the stock image for my phone. Just need the associated PIT file. Could someone please post same? thanks!!!

messerchmidt said:
hello,
i need the PIT file from a at&t (rogers) 317m @ android 4.3 official. Mine keep crashing every time I try to load a rom, just sits at the samsung galaxy note II screen. Seems that I need to clean reload the phone using ODIN, including a repartition. I already got the stock image for my phone. Just need the associated PIT file. Could someone please post same? thanks!!!
Click to expand...
Click to collapse
Only thing u can do without pit. Cause it seems pit wont work since update to 4.3 I tried many different things. Only thing you can do is odin a 4.3 stock rogers. Or the rooted 4.1.2 firmware.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

jester12345 said:
Only thing u can do without pit. Cause it seems pit wont work since update to 4.3 I tried many different things. Only thing you can do is odin a 4.3 stock rogers. Or the rooted 4.1.2 firmware.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can someone post a pit file for me?

Look in the general section.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=2609871

messerchmidt said:
hello,
i need the PIT file from a at&t (rogers) 317m @ android 4.3 official. Mine keep crashing every time I try to load a rom, just sits at the samsung galaxy note II screen. Seems that I need to clean reload the phone using ODIN, including a repartition. I already got the stock image for my phone. Just need the associated PIT file. Could someone please post same? thanks!!!
Click to expand...
Click to collapse
Before you attempt an Odin + pit recovery have you tried the following:
1 - boot into recovery and do a factory reset
2 - flash the stock image via Odin by itself (please copy and post the results from the status screen) - then repeat step #1
If that doesn't resolve your issue....
It's very rare that a repartition is needed, as I'm not aware of any roms that muck with the partition sizing/data on the i317/i317m .... but depending on what the status screen says it may be worth an attempt. If you visited the link above, you'll see that I've temporarily pulled the files. I have a new files ready and am planning on testing the one for the i317 this weekend. I don't have a i317m so... if you want to test the file (which was pulled correctly from an i317m and is now sized correctly) - send me a PM.

Zen Arcade said:
Before you attempt an Odin + pit recovery have you tried the following:
1 - boot into recovery and do a factory reset
2 - flash the stock image via Odin by itself (please copy and post the results from the status screen) - then repeat step #1
If that doesn't resolve your issue....
It's very rare that a repartition is needed, as I'm not aware of any roms that muck with the partition sizing/data on the i317/i317m .... but depending on what the status screen says it may be worth an attempt. If you visited the link above, you'll see that I've temporarily pulled the files. I have a new files ready and am planning on testing the one for the i317 this weekend. I don't have a i317m so... if you want to test the file (which was pulled correctly from an i317m and is now sized correctly) - send me a PM.
Click to expand...
Click to collapse
I reloaded the stock image (rogers 4.3) via odin and did a factory reset in twrp, but i still cannot get a non-stock rom to work. very annoyed, and was going to try to PIT it.

messerchmidt said:
I reloaded the stock image (rogers 4.3) via odin and did a factory reset in twrp, but i still cannot get a non-stock rom to work. very annoyed, and was going to try to PIT it.
Click to expand...
Click to collapse
Did the stock rom work?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

yes using the stock rom atm. as soon as i try to flash a non-stock rom, i it hangs at the boot screen after it retsrats. some older threads suggested re-flashing the phone with a pit file to repartition. I dont know what else to do

Which non-stock rom? After flashing it are you able to get into recovery mode? Does this rom by any chance flash a modem.bin?
If a stock rom loads ok, chances are your pit mapping is OK.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

messerchmidt said:
yes using the stock rom atm. as soon as i try to flash a non-stock rom, i it hangs at the boot screen after it retsrats. some older threads suggested re-flashing the phone with a pit file to repartition. I dont know what else to do
Click to expand...
Click to collapse
Sounds to me like ur definitely not giving the roms enough time on the boot. Some could take 5-7 minutes for initial boot. The fact that stock works and EVERY OTHER ROM here doesn't... leads me to believe this. Patience is virtue
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2

also, someone at your skill level should not be messing with partitions; you are just asking for a brick..

Not to mention the likely requirement of fully wiping the internal storage of the device...
Arbitrarily changing frameworks back and forth without wiping the file structure first will give you problems on boot...(boot loops)...
Additionally....once the rom is flashed...it may help to immediately go to recovery and wipe the device caches and data again...g
Sent from my NOTE 2.750...
Courtesy of our amazing developers...

listen to greg; he is an authority on re-partitioning and bricking! :victory:

wase4711 said:
listen to greg; he is an authority on re-partitioning and bricking! :victory:
Click to expand...
Click to collapse
ok i will try again and keep you posted

got it working after several tires, running the 4.3 jedi x2
:good:

[Q] Need help. Can't get phone to boot.

Hey all, I've been in the android game for a long time now, so I'm not new to any of this, but this s3 here has me totally stumped.
It is my cousins (telus i747m), and we had it stock rooted 4.1.1 until yesterday.
I updated it to 4.3 with kies, and then he opted for a custom rom. So I flashed TWRP in Odin, and tried to flash gummy 4.4.2
It failed with a assert fail as well as a status 7. I tried old TWRP, New TWRP, Old CWM, New CWM, many different roms ranging from 4.3 and upwards. Still failing with the stupid status 7.
Kies no longer connects to the phone, so I can't restore through there. I will have to install through Odin and the download is horribly and painfully slow.
So is there any way to get a custom rom flashed? I have searched and no one seems to have an answer. Any help appreciated.

What assert failure were you getting?

I'd start back from scratch so go back to stock, then root and flash latest version of TWRP or CWM. Make sure when you flash a Rom it's for that specific device for example if its for the AT&T it's for the AT&T. Also make sure to do a factory wipe before installing any me roms
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

xSharpi said:
I'd start back from scratch so go back to stock, then root and flash latest version of TWRP or CWM. Make sure when you flash a Rom it's for that specific device for example if its for the AT&T it's for the AT&T. Also make sure to do a factory wipe before installing any me roms
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
See my posts #2 & #5 here: http://forum.xda-developers.com/showthread.php?t=2585493

pc103 said:
See my posts #2 & #5 here: http://forum.xda-developers.com/showthread.php?t=2585493
Click to expand...
Click to collapse
Also see THIS post for a more detailed description of the updater-script and bootloader assert.

[Q] Bricked l900

I've been installing custom ROMs on android devices since the very first DROID and never bricked a phone I couldn't fix until now. I've been using custom ROMs on my l900 without any problems at all until the 4.3 ROMs started coming out. I had a lot of trouble trying to get Synergy with the 4.3 update installed on my phone but eventually got it up and working but without root access. Eventually got it rooted but it hasn't really been working right since then. I switched over to Smoothest ROM most recently and ran into a weird problem where I noticed my preferred browser Dolphin was no longer on my system. Tried downloading it and got an error, tried restoring it from a Titanium backup and got an error. Also tried installing Chrome and that wouldn't work.
At this point the 2.3 update for Smoothest ROM was out and so I copied the installer onto my mSD card, booted into recover, wiped data/system/cache/dalvik cache and installed the ROM. This is where my trouble started because I got an error saying it couldn't access part of the internal storage. So I combed the XDA forms (and thank you all for all your amazing contributions) and tried every suggestion I could find including formatting the internal storage partition and trying to install the Stock_MK4_w_Note3_v1.3-tester- signed-20140208_181306 and nothing is working. I still get I/O errors and my phone is totally bricked so I am hoping someone can read this and help me get my baby back :crying:.

RACU73 said:
I've been installing custom ROMs on android devices since the very first DROID and never bricked a phone I couldn't fix until now. I've been using custom ROMs on my l900 without any problems at all until the 4.3 ROMs started coming out. I had a lot of trouble trying to get Synergy with the 4.3 update installed on my phone but eventually got it up and working but without root access. Eventually got it rooted but it hasn't really been working right since then. I switched over to Smoothest ROM most recently and ran into a weird problem where I noticed my preferred browser Dolphin was no longer on my system. Tried downloading it and got an error, tried restoring it from a Titanium backup and got an error. Also tried installing Chrome and that wouldn't work.
At this point the 2.3 update for Smoothest ROM was out and so I copied the installer onto my mSD card, booted into recover, wiped data/system/cache/dalvik cache and installed the ROM. This is where my trouble started because I got an error saying it couldn't access part of the internal storage. So I combed the XDA forms (and thank you all for all your amazing contributions) and tried every suggestion I could find including formatting the internal storage partition and trying to install the Stock_MK4_w_Note3_v1.3-tester- signed-20140208_181306 and nothing is working. I still get I/O errors and my phone is totally bricked so I am hoping someone can read this and help me get my baby back :crying:.
Click to expand...
Click to collapse
Read the last few pages of the thread. I have answered this issue over and over again. If you want help and willing to follow the directions step by step I can help.
Sent from my SPH-L900 using XDA Premium 4 mobile app

Yes please
jlmancuso said:
Read the last few pages of the thread. I have answered this issue over and over again. If you want help and willing to follow the directions step by step I can help.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm not seeing a link to any thread but yes I want help and willing to follow your directions.

jlmancuso said:
Read the last few pages of the thread. I have answered this issue over and over again. If you want help and willing to follow the directions step by step I can help.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also I tried your suggestion from this thread step by step and it fails when I flash the ROM.
http://forum.xda-developers.com/showthread.php?t=2542036
I get an error when its trying to install the radio that says "Error executing updater binary in zip"
This did work the first time I tried it in that I was able to at least get the stock Samsung boot animation to play but then it just stayed on that animation over night.

RACU73 said:
Also I tried your suggestion from this thread step by step and it fails when I flash the ROM.
http://forum.xda-developers.com/showthread.php?t=2542036
I get an error when its trying to install the radio that says "Error executing updater binary in zip"
This did work the first time I tried it in that I was able to at least get the stock Samsung boot animation to play but then it just stayed on that animation over night.
Click to expand...
Click to collapse
Also I just realized I pasted the title of the wrong file. The ROM I am trying to install is MC2_STOCK_with_COUNT_RESET-20130511.zip

RACU73 said:
Also I just realized I pasted the title of the wrong file. The ROM I am trying to install is MC2_STOCK_with_COUNT_RESET-20130511.zip
Click to expand...
Click to collapse
Can you link that thread? Sounds like it was not for your device.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Can you link that thread? Sounds like it was not for your device.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here is the thread
http://forum.xda-developers.com/showthread.php?t=2542036
and this is what I tried
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/show...php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

If everything else has failed it sounds like you need to odin the official stock rom. Did you take the OTA update to 4.3 or just flashed a 4.3 rom on top of 4.1.2? Are you trying to get back to stock MC2 4.1.2 or stock MK4 4.3?
Sent from my Knox Free Galaxy Note2 using SkyBlue Tapatalk 2

RACU73 said:
Here is the thread
http://forum.xda-developers.com/showthread.php?t=2542036
and this is what I tried
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/show...php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure what your problem is. In this post it sounds like everything is done. What do you need help with?
Sent from my SPH-L900 using XDA Premium 4 mobile app

srod562 said:
If everything else has failed it sounds like you need to odin the official stock rom. Did you take the OTA update to 4.3 or just flashed a 4.3 rom on top of 4.1.2? Are you trying to get back to stock MC2 4.1.2 or stock MK4 4.3?
Sent from my Knox Free Galaxy Note2 using SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Ideally I'd like to get back to stock MK4 4.3 but what I want most is a working Note 2. I had already switched from MC2 4.1.2 to MK4 4.3 and installed a 4.3 ROM.
Where can I get the Samsung stock 4.3 rom?

towards ndffig
jlmancuso said:
Not sure what your problem is. In this post it sounds like everything is done. What do you need help with?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry for the confusion jmancuso. I followed the instruction you posted on another thread but they only got me as far as the Samsung animation. at the moment the only thing I can run on my phone is TWRP but it can't install anything without running it some kind of error.

RACU73 said:
Sorry for the confusion jmancuso. I followed the instruction you posted on another thread but they only got me as far as the Samsung animation. at the moment the only thing I can run on my phone is TWRP but it can't install anything without running it some kind of error.
Click to expand...
Click to collapse
Sorry got this thread confused with another.
What is the exact error you get?
Sent from my SPH-L900 using XDA Premium 4 mobile app

RACU73 said:
Ideally I'd like to get back to stock MK4 4.3 but what I want most is a working Note 2. I had already switched from MC2 4.1.2 to MK4 4.3 and installed a 4.3 ROM.
Where can I get the Samsung stock 4.3 rom?
Click to expand...
Click to collapse
Here's a link to the MK4 stock odin tar rom. You could try installing the original tar and see if that works. Hope this helps.
http://www.rwilco12.com/downloads.p...sung Galaxy Note II (SPH-L900)/Stock ROMs/MK4
Sent from my Knox Free Galaxy Note2 using SkyBlue Tapatalk 2

occasioned pyirstr
jlmancuso said:
Sorry got this thread confused with another.
What is the exact error you get?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well part of the debug output seems to be getting cut off but here is what I see
Installing Radio...
assert failed: package_extract_file("modem.bin"
E:error executing updater binary in zip '/extern
Error flashing zip '/external_sdcard/MC2_STOCK_w

hoesoc because
srod562 said:
Here's a link to the MK4 stock odin tar rom. You could try installing the original tar and see if that works. Hope this helps.
http://www.rwilco12.com/downloads.p...sung Galaxy Note II (SPH-L900)/Stock ROMs/MK4
Sent from my Knox Free Galaxy Note2 using SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Thanks for the link. I extracted the file, put the phone into Download mode, plugged in the USB cable and this is what I get.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)

RACU73 said:
Well part of the debug output seems to be getting cut off but here is what I see
Installing Radio...
assert failed: package_extract_file("modem.bin"
E:error executing updater binary in zip '/extern
Error flashing zip '/external_sdcard/MC2_STOCK_w
Click to expand...
Click to collapse
What version of twrp? Also did ypu check the md5sum of the download for mc2 stock with counter reset?
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
What version of twrp? Also did ypu check the md5sum of the download for mc2 stock with counter reset?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My version of TWRP is 2.6.3.1
according to TWRP the file doesn't have a md5 file.
I'm starting to think I contracted some nasty piece of malware because things seem to keep getting work. Now I'm getting errors saying their isn't a partition table.

RACU73 said:
My version of TWRP is 2.6.3.1
according to TWRP the file doesn't have a md5 file.
I'm starting to think I contracted some nasty piece of malware because things seem to keep getting work. Now I'm getting errors saying their isn't a partition table.
Click to expand...
Click to collapse
Ouch! To fix that you need a new pit for odin. I will see what I can find for you.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Ouch! To fix that you need a new pit for odin. I will see what I can find for you.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well what's happening is when I try to install any ROM now i get the usual write errors but then I get a few lines that say "Updating partition details..." but that's it. Since I'm not getting a notification that the partition details was successful I'm guessing it means that the their might be something wrong with the partition table.
Also I can't wipe data, cache, and system. I keep getting an error.

RACU73 said:
Well what's happening is when I try to install any ROM now i get the usual write errors but then I get a few lines that say "Updating partition details..." but that's it. Since I'm not getting a notification that the partition details was successful I'm guessing it means that the their might be something wrong with the partition table.
Also I can't wipe data, cache, and system. I keep getting an error.
Click to expand...
Click to collapse
Try wiping with cwm or philz and as I said I will look into getting a pit file tp use in odin.
Sent from my SPH-L900 using XDA Premium 4 mobile app