Develop Bugs

[KERNEL][GB] Pershoot-OC-UV-NEON-FP-SWAP-GOVS-1.708ghz

Admin Edit: Links removed at OP request. I believe they will be available elsewhere. I have always ben very anti-setcpu, but profiles with this kernel really are a must if you want a smooth experience without constant freezing.
This is pershoots source code as of 04/25/2011 with added overclocking patches, all governors available, swap (requested) with a max scaling frequency of 1.708ghz (1708800) YOU SHOULD NOT HAVE THE USB MOUNT ISSUES present in flippy's kernel.
YMMV - Overclocking seems pretty unstable above 1.708 with the current state of the kernel (trust me i tried MANY different voltage variables, different schedulers etc..) that's why 1.8 and 1.9 are not supported, and will not be until they are stable for me again.
DO NOT SCALE ABOVE 1.516 without setting scaling governor to performance, or raising the min cpu frequency as you will experience lockups, setcpu profiles are useful in this situation. screen off profiles should have a MAX frequency of above 768 (this way when the screen goes back on it will ramp to the higher freqency THEN ramp back to the oc'd 1.708 without the jump from 245 causing a freeze) if you want to go with ondemand scaling and want the max at 1.708, you will have the most luck with min at 806 (even then it can and likely will freeze)
Edit: testing screen off profiles, it looks like you can pick whatever you want, currently mine us set to 245 min 368 max. No issues yet.
I have my device set for 368 min 1.708 max performance governor on boot and it hasnt frozen in the last two days. scaling through frequencies, or if the delta between min and max is too high, you may get a kernel panic and a battery pull will be required.
My particular setup (recommended):
on boot - 368 min, 1.708 max performance
screen off - 245 min 806 max ondemand (allows idle speed at 245)
battery < 50% 245 min 806 max ondemand
The same rules basically apply with this OC kernel that applied to flippy's. I'm not responsible for any damage that may result from your use of this kernel. yada yada yada.
you should retain wifi, gps, etc.. if not, flash it again, you did something wrong.
freezes? lockups? lower your clock speed, they shouldnt happen with any more frequency than with pershoots kernel if you stay at 1.516 and below. above that, if you experience a freeze, a last_kmsg wont help, the kernel failed to sync and panicked, there is nothing i can do about that. sorry.
wake-lag? i've gone over that, but here we go again:
generally with oc kernels:
oc+screen on/off animations+brightness > 50% = no wake lag
oc+screen on/off animations+brightness < 50% = wake lag
it isnt ideal, but get a program called screen filter from the market to apply a lesser brightness when above 50% so you dont experience the wake lag.
Enjoy.
There is weirdness with benchmarks, if you've oc'd and you know it should be higher, reset the scaling options in cm settings and try again. It's very weird and i havent put together a full list of what causes the behavior, more as it develops i guess.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Awesome thanks. Seems to be pretty stable for me at 1600 ondemand.
Sent from my HTC Desire Z/G2 using XDA App

The benchmark screenie is at 1.7 Ghz?
And thatnkyou for the kernel ..will be checking it out in a while

Works good using your recomended settings
Sent from my HTC Vision using XDA App

It's a stable as I could get it. Been using for a couple days without issue to make sure before I posted it.

Any chance of adding the smartass governor ?
I've read many things about that and nobody never included it in a kernel.
Only in roms.
Your kernel is really good so was wondering

This is awsome! Kernel is running fast and stable. Although i don't clock it all the way up to 1700 i love that i finally can use pershoot kernel with interactive governor.
Thanks very much!

will be adding to my rom on next version

xboarder56 said:
will be adding to my rom on next version
Click to expand...
Click to collapse
Same here if you don't mind

Don't mind at all, for the person who asked, there is source for the smartass governor, I just need to locate it and merge. I'll look into it today.

Will flash tonight with the latest CM nightly. Thanks

This show promise and potential. Love, love love. Did you ever find the source for the smartass governor?
Found the this on github. It's the smartass source from a kernel for the HTC Shift, should be the same mostly.
Also this governor look interesting, maybe give an alpha release with this one in it for testing? Scary just sounds like a bada$$ name for a governor. It's from Scaryghoul btw, just to give credit.

Thanks for this amazinglarry. I'm gonna test this out for a few days before I can give you some useful feedback.
In the meantime, can I refer you to a kernel in the MT4G section that seems to try to accomplish exactly what you are doing (all available kernels, high overclock, etc.). It has all the source readily available. The link is here. http://forum.xda-developers.com/member.php?u=2491887

I'll take a look. Gracias.

Please forgive my ignorance but what might this offer over pershoots kernal? His newest kernal fixed a huge headache I had with wifi and I don't want that headache back. Is it just the addition of higher oc and the added govenators or is there more added as well?

No, just, swap, governors, and overclocking a bit more.

I'm getting instability with the camera and gallery. It either locks up or saves pictures as a black square. Gallery FC's when I try to delete pictures. As far as I recall, this didn't happen with pershoots or stock CM. I'm running 7.0.2 with no profiles, clocked at 245-979 on demand with CM settings, no setcpu. When I can get in front of a computer with adb ill post some logs.

mejorguille said:
I'm getting instability with the camera and gallery. It either locks up or saves pictures as a black square. Gallery FC's when I try to delete pictures. As far as I recall, this didn't happen with pershoots or stock CM. I'm running 7.0.2 with no profiles, clocked at 245-979 on demand with CM settings, no setcpu. When I can get in front of a computer with adb ill post some logs.
Click to expand...
Click to collapse
I'm not able to reproduce, camera and gallery are working st 806 and 1.708 on my device, clear pictures, no force closes.
Grab some logs, there should be very little difference in functionality (if any) between this version and the official version of pershoot's kernel, unless he does some magic that isn't in his git, which I highly suspect, seeing as how quadrant scores are a little lower at the same clock speeds with my version and his.
But as far as functions and drivers, you shouldn't have issues.

I'm thinking its something wrong with my setup. I reflashed pershoots kernel, cleared caches, and ran a fix_permission. I no longer have force closes but my camera isn't saving? Ill have to look into it.

mejorguille said:
I'm thinking its something wrong with my setup. I reflashed pershoots kernel, cleared caches, and ran a fix_permission. I no longer have force closes but my camera isn't saving? Ill have to look into it.
Click to expand...
Click to collapse
Let me know if you can pinpoint the issue, and need some possible help.

[KERNEL] GALAXIAN [344MB][JVU][Voodoo Sound][EXT4][BLN][COLOR]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*
Galaxian kernel was made to improve your Galaxy S usage experience.
If you are looking for fast and stable kernel, this one is for you!
Why Galaxian?
Based on latest source from Samsung Open Source Release Center and always latest initramfs
344MB RAM memory without side effects like loosing HD capabilities
EXT4 and RFS support with autodetection
ClockWorkMod Recovery v3.0.0.5
Ondemand governor with tweaked up/down scaling
Voodoo Sound v10
Slightly increased charging current limits for both AC and USB charging modes
Improved touch sensitivity
Front camera is working (no snapshot when recording support)
Video calls are working
Modules compiled with -O2 flags
LZMA kernel compression, GZIP initramfs compression
Low Memory Killer levels are just perfect
Unbelivable colors and sharpness
Brightness levels are now fixed (no more red tint on each)
Fixed MDNIE profiles (outdoor mode can now work together with selected color temperature).
Light sensor driver fine tuned
WiFi driver buffer is now bigger
New jpeg compression mode from Galaxy TAB
Read A Head parameter increased to 512KB
BLN support
Optimized compile flags
CPU clock speed switch is now faster
Custom bootanimations support! just name yours as sanim.zip and place in /system/media/
Minor tweaks
Where to get it?
Click here!
How to apply?
Please use Odin and choose Galaxian....tar in PDA section (without pit file, repartition or bootloader update!)
Want to convert your RFS -> EXT4?
There are two simple ways to do that:
Use Chainfire's EXT4 Tools (ignore warning message)
Use Galaxian ROM which will do that for you automatically
Any sources?
Click here!
I would like to say thank you to everyone
who helped me with this project!​
*Logo is a trademark of NAMCO BANDAI.

let's see how it works
Edit: Great kernel, best one for StockRoms.

WoooHooo what a Features
nyc one Brother

nice!
will try it out

is there a jvh edition?

No but can be if community want to

Do I disable lagfix before flashing the kernel?

is there any way you could implement voodoo color in this kernel ?

fuzzvirus said:
Do I disable lagfix before flashing the kernel?
Click to expand...
Click to collapse
No! There is autodetection system build-in! Kernel boot's up with RFS and EXT4.

reneimas said:
is there any way you could implement voodoo color in this kernel ?
Click to expand...
Click to collapse
No, sorry, I've tried voodoo colors and I'm not happy how it performs. Check this version, I've applied Speedmod color fix with my own changes, all is sharp and vivid.

Lukiqq said:
No, sorry, I've tried voodoo colors and I'm not happy how it performs. Check this version, I've applied Speedmod color fix with my own changes, all is sharp and vivid.
Click to expand...
Click to collapse
I am using your kernel right now. The colours are not bad but still wish i could control the contrast through the voodoo app. P.s does this kernel automatically converts everything to EXT4 or is it manual because weirdly i get really rubbish quadrants scores on [F1 Galaxy S2 V3.1] rom :/

Nice.
Couple of things to note, OC WILL freeze on some phones, including mine... every phone is different.
Ondemand sample rate of 40000 may cause music to stutter and will need to be raised to something like 60000+.
Nice work though.

features look good i want to try right now

lpy said:
Nice.
Couple of things to note, OC WILL freeze on some phones, including mine... every phone is different.
Ondemand sample rate of 40000 may cause music to stutter and will need to be raised to something like 60000+.
Nice work though.
Click to expand...
Click to collapse
Thank you! I've tested it on 3 phones and didn't noticed any problems with OC, but you have right, things may happen. If so, tell me, I'll tune some voltage values.

reneimas said:
I am using your kernel right now. The colours are not bad but still wish i could control the contrast through the voodoo app. P.s does this kernel automatically converts everything to EXT4 or is it manual because weirdly i get really rubbish quadrants scores on [F1 Galaxy S2 V3.1] rom :/
Click to expand...
Click to collapse
Read carefully 1st post There is something about EXT4, even attached apk to do so.

on my phone neocore and quadrant shows 48-49 fps only. but quadrant is around 3300

if i have lagfix enabled can flsah it?

Lukiqq said:
Thank you! I've tested it on 3 phones and didn't noticed any problems with OC, but you have right, things may happen. If so, tell me, I'll tune some voltage values.
Click to expand...
Click to collapse
Unfortunately, raising/tuning voltages can sometimes make things more unstable. Some CPU's simply can't handle it no matter what you do. That's just my experience though, we'll see how it goes for others.

mar90 said:
on my phone neocore and quadrant shows 48-49 fps only. but quadrant is around 3300
Click to expand...
Click to collapse
Neocore 64.5
Quadrant, tunnel test about 520 points, overall result as I've said in description.

the spica master from samdroid.net come back to here ..hhe..
i'll test your kernel..
Sent from my GT-I9000 using Tapatalk

Benchmark Scores

This thread is for people to post their benchmark scores.
Please explain:
1.) What ROM/Kernel you are using
2.) What app you used for Benchmarking e.g. CF-Bench / Antutu / Quadrant etc.
3.) What OC/UV settings are in use if any.
Also post a screenshot if possible
Curious to see what scores people are hitting on different ROM/kernel combo's.

I am on Bigxie's v8 rom and his apex kernel with no additional performance settings, here are the results without a fresh reboot;
CF - Bench :
Native: 10895 , Java : 3234 , Overall : 6298
Antutu :
5838
Quadrant :
2057
I rebooted the phone and ran Quadrant again, the score was 1849, then ran again and the score was 2066, Quadrant is a joke I guess Antutu was 5843 after reboot, so, I guess it is more reliable.

Sweet. I am using Android Revolution HD 2.1.3 with Jame Bond kernel at 1.4GHz.
CF Bench total is 7336
Antutu total was 6660
And I don't bother with Quadrant
Sent from my Galaxy Nexus using xda premium

1) AOKP & franco.kernel
2) Quadrant: 2657
3) NO OV & UV
Greets!

I'm on stock rom at the moment.
Antutu : 6095
Quadrant : 1653

Take up enough space or what?
mDroidd said:
1) AOKP & franco.kernel
2) Quadrant: 2657
3) NO OV & UV
Greets!
​
Click to expand...
Click to collapse
Without a doubt the most ridiculous signature Ive seen on this site. Wow.​

Hi,
Rom:AOKP http://forum.xda-developers.com/showthread.php?t=1402341
Kernel:Franco.kernel http://forum.xda-developers.com/showthread.php?t=1367341
Running at 350Mhz-1.35Ghz/Ondemand/No other special settings:

Villain ROM with Franco Kernel (no reboot) - not touched any settings
Antutu: 6317
Quadrant : 2443
but i know these mean nothing really.

1-) Stock.
2-)
CF- Bench: 6360
Antutu: 5783
Quadrant: 1417
IFLATLINEI said:
Without a doubt the most ridiculous signature Ive seen on this site. Wow.
Click to expand...
Click to collapse
lol me 2.

Agreed on the rediculous signature...must be an attention whore!

Gummy rom with imoseyon's kernel @ 1350mhz gives me ~6700 antutu and 27.7fps in nenamark2

Re,
Brake my own score :
General:
Rom:AOKP
Kernel:Franco Kernel
For both benchs,i killed some apps running in background (not specified in my previous benchs)
Running at 350Mhz-1.35Ghz/Ondemand/No reboot:
Second bench after reboot/Same settings...
I know,i know nothing reliable...Just playing
Nothing else to do
About user UI with this configerfect,no issues,no overheating,no random reboot or SOD...
Benchs aren't says anything but very bad benchs,in general,for the phone i've haded:bad UI,bad games,etc...So in general higher is the bench,higher is the UI for most phones
In any case with that i've posted above always is perfect:smooth,speed,reactive,flyin and...What else

Hi,
Bump
Rom:AOKP build #19
Kernel:franciscofranco nightly #13
Other:governor Ondemand/350Mhz-1350Ghz/No Undervolt/No reboot...
PS:yes i like benchs ,battery drain is good for me so I test the perfs

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rom stock 402
kernel stock
no uv no oc

1) OAKP rom and Leankernel 1.7.1
2) CF Bench - 6467 Antutu - 6527 Quadrant - 2111
3) No o/c or uv to my knowledge unless it's defaulted in the kernel/rom

I am on stock 4.0.2
Antutu - 6157
CF-Bench - 6636

Hi,
Re bump :
Rom:AOKP build #20
Kernel:Fransico Franco nightly #14.2
Other:Conservative governor/350Mhz-1.35Ghz/No undervolt/No other tweaks/After reboot.

God knows how you get 6000+. Best I ever get it 4500 on aokp and lean kernal!!!!
Sent from my Galaxy Nexus using xda premium

Quadrant: 2408
AnTuTu: 6437
Franco 14.1 nightly, no oc or uv
Gummy Nex 0.6.6

GR36 said:
God knows how you get 6000+. Best I ever get it 4500 on aokp and lean kernal!!!!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Hi,
It depends on many things...
The kernel first (i never tested the Leankernel,by Imoseyon i suppose)...So the cpu freq/gpu overclock,for me everything is notified,details in kernel/rom threads specified...
Then the rom,the rom does not always the job but...
The governor choice,the min cpu frequence...
The conditions:after reboot,apps running in background (killed/not killed) and the most important i think (exept the kernel) is the cpu temperature...
If you run multiple benchs one after the other ->the cpu heats ->thermal protection->lower scores...
Thats all...For me...Just test,reboot,wait for lower cpu temperature,change min cpu frequence,governor,etc...
In any case this thread is just for benchs...
If your Gnex runs well with your settings (rom+kernel),all is smooth and fast and good battery life for you,whatever the benchs scores...You do not care about this.
It's just a "game" i think
As i always said,for me,all is perfect in term of UI (smooth and fast) and battery life...So i test something else ... the benchmarks

[APP] SU Root Tools

***THIS APP NEEDS A ROOT PHONE***
This app includes root tools that you can use with a simple click. Its currently under development, this means that it will get new things added.
***INCLUDES***
Reboot
Reboot in Recovery Mode
Reboot in Bootloader Mode
Quick Reboot
Power off your device
Wipe cache and dalivk-cache
Wipe dalvik-cache
Wipe battery stats
wipe cache
Free up RAM
backup bootanimation
install bootanimation
Save a LogCat
Save App specific LogCat
Turn On/Off CPU2
Kernel mods:
1. Overclock
2. Select Governor
3. Governor Settings for:
---EVERY GOVERNOR (PLEASE REPORT IF IT DOESN'T WORK)
***ONLYE FOR GALAXY NEXUS AND GALAXY SIII***
CPU temperature notification.
I will add more and more features.
Download now from PLAY STORE!!!

Looks good thanks. Will helping testing as much as possible.
Sent from my Galaxy Nexus using Tapatalk 2

Really nice stuff! If I were you, I'll add extra features that no other competitors have
Swyped on my Galaxy Nexus running AOKP with Franco Kernel

very good work, compliments!!

Version 1.5
Changed orientation to portrait. Added a bootanimation preview button. Easier file chooser for bootanimation. Completely different look for kernel mods. App more user friendly. Fixed some minor bugs. Removed some unused toast messages.
Need some test for bootanimaton preview. Please report back

Updated to latest, Version 1.6, with many fixes

unforgivenmercy said:
Looks good thanks. Will helping testing as much as possible.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Could you try the cpu temp notification, just turn it on and off like 10 times and tell me if you get any FC or if its not showing.
Thanks

Version 1.7
A lot of bug fix. Fixed governor settings not applying, added a check box to set governor at boot, fixed clear cache for ROMs that doesn't support it, fixed crash for CPU temp notification, fixed loop when device can't reboot, clear cache, etc. Added GSF id and System id info, (Will just show it to you).
Click to expand...
Click to collapse
If anyone get any other FC when enabling CPU temperature read, please report it again, since it should be fixed. Thanks.

New version with Rom management. Only available for CWM Recovery!!

I think you have a minor typo in OP 'turn off CPU 2' should be 'turn off CPU 1' as cores are CPU 0, CPU 1 (duel core) then CPU 2 and CPU 3 (for quad core device)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Galaxy Nexus

The Gingerbread Man said:
I think you have a minor typo in OP 'turn off CPU 2' should be 'turn off CPU 1' as cores are CPU 0, CPU 1 (duel core) then CPU 2 and CPU 3 (for quad core device)
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Yes I know that, but for not developers people seeing a number 1 is like the first CPU will be off. Since you normally start counting with the number 1. I did name it number 1 in one of the tests and I received a lot of e-mails asking me if its safe to turn off the first CPU and why I'm not doing it with the second CPU. So I decided to change the number so that way people wont get confused.
So basically you are right, but I did it on purpose.

Rotary Heart said:
Yes I know that, but for not developers people seeing a number 1 is like the first CPU will be off. Since you normally start counting with the number 1. I did name it number 1 in one of the tests and I received a lot of e-mails asking me if its safe to turn off the first CPU and why I'm not doing it with the second CPU. So I decided to change the number so that way people wont get confused.
So basically you are right, but I did it on purpose.
Click to expand...
Click to collapse
I see and no worries I was just checking, I don't intend on using this but just wanted to make sure you knew the correct labeling for the cores
Sent from my Galaxy Nexus

The Gingerbread Man said:
I see and no worries I was just checking, I don't intend on using this but just wanted to make sure you knew the correct labeling for the cores
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Thanks anyway

[MOD][for KT kernel TW] Turbo ZRAM 4X swaps!

>>> Welcome to Turbo ZRAM!! turbo ZRAM Script V1.2 <<<
===============================
What is Turbo ZRAM?
It is a unique performance mod which sets up 4 parallel zram swaps for kernels with the zram module.The swaps are set to run at the same priority so the Linux kernel is able to multi-thread the swap process on our powerful quad core devices. Zram runs super fast with no lag
What does zram do in the first place?
Zram is a virtual disk which resides in RAM itself. App data sitting in the memory is compressed while it is not in use to 1/3 its original size. Effectively your phone has more memory!
Regular single-swap zram can lag considerably while it compresses/decompresses the swap data. Turbo zram solves this issue
Why would we need zram on a device with 2GB of RAM?
Well it depends on what you want to do with your device but why wouldn't you want to effectively create more memory out of thin air?
Also Samsung TW has notorious LAG and multi-tasking issues which this mod solves. The zram swaps keep the memory from maxing out as often so the TW lag is almost eliminated...
Finally, Multi-tasking is MASSIVELY boosted. You can keep more big apps running in memory without them being killed too early... test this yourself you will be able to multitask without hiccups to your hearts content.
===============================
This mod now comes in a stand-alone init.d boot-script version as well as the main app version.
The scripts come in 3 size choices as flashable CWM zips which also set up the reuired dedicated busybox
===============================
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
===============================
Turbo ZRAM app V1.2c:
>>> I Finally figured out how to set the swaps via init.d script!... Set on boot now runs via init.d
>>> App no longer needs a running service so takes up less RAM.
>>> Commands further tweaked to rely on the custom busybox. This should help people experiencing issues due to the wrong busybox setup.
===============================
Link to the main thread:
http://forum.xda-developers.com/showthread.php?t=2422040
THIS MOD REQUIRES A KERNEL WITH ZRAM SET UP AS A MODULE IN /system/lib/modules/. IT IS DESIGNED FOR KT KERNELS TW VERSIONS WHICH HAVE THIS SETUP

I think you meant to put this in Android Development But good job otherwise!

elesbb said:
I think you meant to put this in Android Development But good job otherwise!
Click to expand...
Click to collapse
It's original development since i'm the first to come up with this idea so it's not cooked from existing bits n pieces
Sent from my GT-I9505 using Tapatalk 2

rlorange said:
It's original development since i'm the first to come up with this idea so it's not cooked from existing bits n pieces
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Original Development is stuff (ROMs/KERNELS) compiled from SOURCE code. "Ideas" are not Original Development. You would prolly be better off having it go in Android Development or even Theme's And Apps Or general. But this is surely not Original Development. BTW ZRAM has been around for a very long time, so i don't see how your the first to come up with the idea..

elesbb said:
Original Development is stuff (ROMs/KERNELS) compiled from SOURCE code. "Ideas" are not Original Development. You would prolly be better off having it go in Android Development or even Theme's And Apps Or general. But this is surely not Original Development. BTW ZRAM has been around for a very long time, so i don't see how your the first to come up with the idea..
Click to expand...
Click to collapse
Yeah but I've never seen anyone set up four zram disks with an equal priority so they run in parallel and boost performance massively. .. But your point is taken. Apps n MODs is probably a better category
Sent from my GT-I9505 using Tapatalk 2