Note2 Software Update - Galaxy Note II Q&A, Help & Troubleshooting

hi,
due to an issue with my phone's camera, i had factory reset my note2 and downgraded to 4.1.1 original phone setting from 4.1.2. my concern now is, after moved down from 4.1.2 to 4.1.1, already few days and when i check the software update, it tells my phone is already with the latest version. Will not the phone re-upgrade back to 4.1.2 again and i have to manually do the upgrade? what if future version upgrade like 4.2? or 4.x??
pls help.
thanks and regards

How you Check Update Threw OTA or Kies?If threw OTA than try Kies.QUOTE=lang419;38492665]hi,
due to an issue with my phone's camera, i had factory reset my note2 and downgraded to 4.1.1 original phone setting from 4.1.2. my concern now is, after moved down from 4.1.2 to 4.1.1, already few days and when i check the software update, it tells my phone is already with the latest version. Will not the phone re-upgrade back to 4.1.2 again and i have to manually do the upgrade? what if future version upgrade like 4.2? or 4.x??
pls help.
thanks and regards[/QUOTE]

You might have downgraded to a 4.1.1 rom of a different country.
If you wanna upgrade again then flash the latest rom for your country.
Sent from my GT-N7100 using xda app-developers app

Related

[Q] OTA Software Update

I updated to JB yesterday with the OTA on T-mobile. I am rooted and used OTA root keeper to restore root. I went to change my build.prop file to change the display density. What I didn't do was use the new build.prop from JB. So I softbricked my phone. I restored to UVALH2 and was going to get the OTA's to go back to JB. When I click on "Software Update" it says I am up to date. I noticed that my baseband is still JB's.
The question here is, does software update go off of what is listed for the Baseband or the Build Number?
Solved
Haven't made too many posts where I need to update afterwards. I decided to reflash UVLH2 modem. Once back in phone I went to about device and tried to do the SW update. It prompted me for download.
So, from what I can tell here, OTA are based upon your radio version, to answer my own question. Good day!
Glad you got it figured out. All of that is covered in the Official Jelly Bean thread.
This one is closed. If anyone uses search (ya right jk) and this thread comes up, just go to the above thread.

Unrooted At&t Note 2 didn't update

I just recently went back to stock because I was having data issues while my phone was rooted. The problem that I'm having right now is when I searched for a software update using the phone, it didn't find anything. I'm currently running 4.1.1 which I know prior to rooting my phone I was on the 4.1.2 version that includes multi-window-control (MWC).
Any suggestions?

Note2 Software Update

hi,
due to an issue with my phone's camera, i had factory reset my note2 and downgraded to 4.1.1 original phone setting from 4.1.2. my concern now is, after moved down from 4.1.2 to 4.1.1, already few days and when i check the software update, it tells my phone is already with the latest version. Will not the phone re-upgrade back to 4.1.2 again and i have to manually do the upgrade? what if future version upgrade like 4.2? or 4.x??
pls help.
thanks and regards
Wrong forum..
Slithered from my HTC One X+
Take screenshot of your info screen that shows the version your on. Then we can get a better idea of the situation
Sent from my Amazing Galaxy Note 2!
lang419 said:
hi,
due to an issue with my phone's camera, i had factory reset my note2 and downgraded to 4.1.1 original phone setting from 4.1.2. my concern now is, after moved down from 4.1.2 to 4.1.1, already few days and when i check the software update, it tells my phone is already with the latest version. Will not the phone re-upgrade back to 4.1.2 again and i have to manually do the upgrade? what if future version upgrade like 4.2? or 4.x??
pls help.
thanks and regards
Click to expand...
Click to collapse
I had something like that when I just downgraded try going into settings and find Google framework and clear data and force stop that should help
Sent from my Nexus 7 using xda app-developers app

ATT I317 Note 2 Wont Update

I'm new to android. I can't figure out why my phone will not OTA update. I'm on 4.1.2 I thought that I had the Sep. 4.1.2 update, but I don't and found that out when I was trying to update to the 4.3 that I've been waiting for. I'm still on version (I317UCAMC3) not (H3) which it says you need for the 4.3 update.
Every time I try to OTA update I get Software Update Interrupted, I think I've also gotten "your software is up to date"? I've also tried the Kies firmware and it says that my version is not supported to update via kies? I got the phone off eBay supposedly new and unlocked, but it's Att branded. Would being unlocked stop an update?
sovrin said:
I'm new to android. I can't figure out why my phone will not OTA update. I'm on 4.1.2 I thought that I had the Sep. 4.1.2 update, but I don't and found that out when I was trying to update to the 4.3 that I've been waiting for. I'm still on version (I317UCAMC3) not (H3) which it says you need for the 4.3 update.
Every time I try to OTA update I get Software Update Interrupted, I think I've also gotten "your software is up to date"? I've also tried the Kies firmware and it says that my version is not supported to update via kies? I got the phone off eBay supposedly new and unlocked, but it's Att branded. Would being unlocked stop an update?
Click to expand...
Click to collapse
DO NOT OTA
you want to be on 4.3, just use the one click method, this way you dont have the locked bootloader
bbrennan said:
DO NOT OTA
you want to be on 4.3, just use the one click method, this way you dont have the locked bootloader
Click to expand...
Click to collapse
I'm not familiar with the one click method. How do I do that?
thx
sovrin said:
I'm new to android. I can't figure out why my phone will not OTA update. I'm on 4.1.2 I thought that I had the Sep. 4.1.2 update, but I don't and found that out when I was trying to update to the 4.3 that I've been waiting for. I'm still on version (I317UCAMC3) not (H3) which it says you need for the 4.3 update.
Every time I try to OTA update I get Software Update Interrupted, I think I've also gotten "your software is up to date"? I've also tried the Kies firmware and it says that my version is not supported to update via kies? I got the phone off eBay supposedly new and unlocked, but it's Att branded. Would being unlocked stop an update?
Click to expand...
Click to collapse
OTA = BAD. Wait and get one that is knox free as well.
It's not the unlocked part blocking the update. If the updated senses that the current version is not 100% stock, then it won't update. If the recovery is not 100% stock (I'm not 100% about this though), it won't update.
But you will end up in the long run being better off flashing either 4.4 (which ever cooked ROM you choose,) or waiting for the fabulous dev's here in XDA land to cook up the 4.3 version knox free, and rooted out of the box.
As far as I know the phone is stock so I still don't understand why the update won't go through. I downloaded a root checker to see if my phone was rooted and it says that it is not. since I can't figure out why the phone won't update I guess I should just root and install a rom.
Usually a custom recovery stops an official update.
OTA update note 2
MasterDecker said:
OTA = BAD. Wait and get one that is knox free as well.
It's not the unlocked part blocking the update. If the updated senses that the current version is not 100% stock, then it won't update. If the recovery is not 100% stock (I'm not 100% about this though), it won't update.
But you will end up in the long run being better off flashing either 4.4 (which ever cooked ROM you choose,) or waiting for the fabulous dev's here in XDA land to cook up the 4.3 version knox free, and rooted out of the box.
Click to expand...
Click to collapse
I was told unless you have ***mh3, it will not update to 4.3 via OTA.
I have same issue, I have UCAMA3 and it won't do.
It seems it doesn't even have to be stock for someone I work with had **MH3 rooted and all and it updated to 4.3 OTA.
Maybe someone will be able to put out rooted stock one in the future.
my phone wont update either
I am having a similiar issue with my phone, it is rooted and will not update. I have Android version 4.1.2 Baseband version I317UCAMH3 Build JZO54k.. and I have twrp recovery. Does anyone know what I can do to receive the update? Do I have to unroot in order to receive the update? and if so can someone direct me on how to do that? Or is it better to just flash a custom rom and if so would someone be able to direct me to where I can find the instructions to do that. Thank you so much! I have flashed roms in the past but its been a while...
rebecca928,sun80chon,sovrin
Enjoy
[ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted Odex/De-Odex/Odin
http://forum.xda-developers.com/showthread.php?t=2589891

[Q] Cannot update my i747

Hello all,
I had my s3 rooted, and unlocked with stock ROM. And I think I've also freeze my "AT&T Software Update" a while ago, so it was stuck on 4.1.1. Now, I would like to update my firmware to 4.3 or newer, and stay stock. I tried to go to the setting and select Software update, but nothing happen. I've also tried to find that "AT&T Software Update" in Titanium Pro, but have no result. Can anyone point me to the right direction on how I can do it?
Thanks
You can't update if you're rooted
So in order to update you need to unroot or just download the 4.3 firmware and flash thru Odin
Sent from my SAMSUNG-SGH-I747 using Tapatalk
bennyc1213 said:
Hello all,
I had my s3 rooted, and unlocked with stock ROM. And I think I've also freeze my "AT&T Software Update" a while ago, so it was stuck on 4.1.1. Now, I would like to update my firmware to 4.3 or newer, and stay stock. I tried to go to the setting and select Software update, but nothing happen. I've also tried to find that "AT&T Software Update" in Titanium Pro, but have no result. Can anyone point me to the right direction on how I can do it?
Thanks
Click to expand...
Click to collapse
You can do a 2-step manual update from 4.1.1 to 4.1.2 and then to 4.3. Please go to page 300 of the thread below to see my steers to another user on exactly the same issue.
http://forum.xda-developers.com/showthread.php?t=1849043&page=300
Larry2999 said:
You can do a 2-step manual update from 4.1.1 to 4.1.2 and then to 4.3. Please go to page 300 of the thread below to see my steers to another user on exactly the same issue.
http://forum.xda-developers.com/showthread.php?t=1849043&page=300
Click to expand...
Click to collapse
Thanks Larry. That's a really helpful information. One question though, if I do these manual update, am I expecting all data will be gone? Or will it simply update the firmware, and leave everything alone?
Thanks again
Updating to a stock 4.3 ROM will install Knox too. Rooting will trip the Knox counter. If you have no warranty on your phone, this will not be a problem.
lo
You should also know that Knox can sometimes interfere with obtaining root. Once you're on a 4.3 bootloader, you cannot downgrade the bootloader.
bennyc1213 said:
Thanks Larry. That's a really helpful information. One question though, if I do these manual update, am I expecting all data will be gone? Or will it simply update the firmware, and leave everything alone?
Thanks again
Click to expand...
Click to collapse
I should have mentioned that earlier. Yes, updating can affect all your data so I would advise you first back up your data. You can install Samsung Kies on your phone and use this to back up your data, apps and everything else you want and restore afterwards. Please see also Audit's post. Updating to the latest firmware which is 4.3 could be a one-way trip and will install Knox security on your phone. The update will unroot your phone, restore to factory settings and install stock recovery. If you decide to re-root afterwards, however, there are several ways of doing this.

Categories

Resources