Frequently Asked Questions - Amazon Kindle Fire - Kindle Fire Q&A, Help & Troubleshooting

[SIZE=+3]Frequently Asked Questions[/SIZE]
[SIZE=+2]Amazon Kindle Fire[/SIZE]​
[SIZE=+1]This a short list of frequently asked questions in this device forum and the answers often given as a response. It should serve as a starting point for gathering knowledge and finding solutions to many common problems. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, try to find an existing thread or create your own. Do not use this as a general help thread.[/SIZE]
[SIZE=+1]Q1: I have a new Kindle Fire (purchased after Nov 2012). What do I need to know first?
[/SIZE]You will BRICK YOUR KINDLE if you don't READ THIS FIRST!!!​[SIZE=+1]Q2: I have an older Kindle Fire (1st generation). What do I need to know first?[/SIZE][GUIDE] Kindle Fire For Beginners​[SIZE=+1]Q3: How can I tell if I have a 1st or 2nd generation Kindle Fire?[/SIZE]If you have a software version of 6.3.2 or earlier, it is a 1st generation Kindle Fire. Anything after that is a 2nd generation Kindle Fire.​[SIZE=+1]Q4: Where do I find information on how to root the 1st generation Kindle Fire?[/SIZE][HOW-TO] Root / Install a ROM / Unroot / Revert to Stock (A KFFB Supplement)​[SIZE=+1]Q5: Can I root the Kindle Fire without a computer?[/SIZE]No​[SIZE=+1]Q6: Is there a “One-Click” or scripted root method for the 1st generation Kindle Fire?[/SIZE][Root][TWRP][FFF][CWM]Kindle Fire Utility v0.9.6 (5/09/12) (Windows) - or - BreakDroid (Mac)
Be careful when using these tools and make sure you understand how to fix problems that may arise before attempting anything. Failure to do so will most likely lead to problems.​[SIZE=+1]Q7: Is there an easier way to root the 1st generation Kindle Fire?[/SIZE]Install custom recovery, then install a custom ROM. If you want a rooted version of the stock OS, install MoDaCo.​[SIZE=+1]Q8: What custom recoveries are available for the Kindle Fire?[/SIZE]Team Win Recovery Project (TWRP) - and - Cannibal Open Touch Recovery (COTR)​[SIZE=+1]Q9: Is there an easy way to install a different custom bootloader or recovery without using ADB or fastboot?[/SIZE][smirkit-v2.4][02/05]install recovery+bootloader COTR or TWRP​[SIZE=+1]Q10: Where can I find a list of available ROMs?[/SIZE][INDEX] Kindle Fire Development *REVISED NIGHTLY*​[SIZE=+1]Q11: What is the best ROM available?[/SIZE]What is considered to be the best ROM is always a matter of opinion. Just pick one and try it out to see if you like it. If not, try a different one. If you are looking to find the most popular ROM, you can search the development forum for the ROM thread with the most views.​[SIZE=+1]Q12: I just want to root my 1st generation Kindle Fire. Do I have to install FireFireFire?[/SIZE]No, but not having FireFireFire installed on a rooted device opens you up to the potential of serious problems in case anything goes wrong, and things will almost always go wrong.​[SIZE=+1]Q13: Where do I find information on how to unroot the 1st generation Kindle Fire?[/SIZE][HOW-TO] Root / Install a ROM / Unroot / Revert to Stock (A KFFB Supplement)​[SIZE=+1]Q14: Where do I find information on how install ADB/fastboot drivers for the 1st generation Kindle Fire?[/SIZE][GUIDE] Kindle Fire For Beginners – Post #2 - & - Let's take some of the mystery out of getting ADB working in Windows​[SIZE=+1]Q15: I've exhausted all available options and still can't get ADB/fastboot to connect in Windows. What else can I do?[/SIZE]Soupkit
​[SIZE=+1]Q16: What does it mean when my device is stuck at the Kindle Fire logo?[/SIZE]It depends on which Kindle Fire logo you're talking about. If you're talking about the Kindle Fire logo that stays brightly lit without any change in brightness, it means the device is in fastboot mode. Just change the bootmode to normal or recovery and reboot. If you are unable to change the bootmode, then you need to fix your drivers. If the Kindle Fire logo you're talking about flashes and goes dim after being brightly lit for a few seconds, then your device is trying to boot normally to a malfunctioning operating system, likely caused by not wiping the data partition (factory reset) before flashing a ROM. If that's the case, you will likely need a factory cable to get into fastboot mode so you can access or (if needed) install custom recovery, then reinstall a ROM properly.​[SIZE=+1]Q17: What can I do that will fix 90% of all Kindle Fire problems?[/SIZE]Get access to custom recovery and reinstall a ROM, making sure to wipe the data partition (factory reset) first.​[SIZE=+1]Q18: Where do I find information on some of the various commands and how to use them?[/SIZE][GUIDE] Kindle Fire For Beginners – Post #3​[SIZE=+1]Q19: Where do I find information on how to use fastboot mode?[/SIZE] [GUIDE] Fastboot Mode​[SIZE=+1]Q20: How do I install a custom ROM?[/SIZE][HOW-TO] Root / Install a ROM / Unroot / Revert to Stock (A KFFB Supplement)​[SIZE=+1]Q21: I need to get a ROM or file onto my Kindle Fire. What are the various methods of doing so?[/SIZE]You can download the ROM or file onto your device via the Internet. You can use an app like Wifi File Explorer to transfer the ROM or file to your sdcard over wifi. While booted normally, you can mount your sdcard as a USB storage device and transfer it from your computer. If neither of those options are available, you can use ADB to push the ROM or file to your sdcard or use the “Mount” function in custom recovery to mount your sdcard as a USB storage device and transfer it from your computer.​[SIZE=+1]Q22: What can I do if I am unable to mount my sdcard to USB in recovery?[/SIZE][HOW TO] Fix "Failure to mount" sdcard, system, data or cache​[SIZE=+1]Q23: I like the stock OS but is there an easier way to install Google Play, Google Apps, Disable OTA updates, change wallpapers, etc., rather than doing it manually?[/SIZE]Install MoDaCo while in recovery​[SIZE=+1]Q24: Where do I find information on how to restore the Kindle Fire to it's original unmodified state?[/SIZE][HOW-TO] Root / Install a ROM / Unroot / Revert to Stock (A KFFB Supplement)​[SIZE=+1]Q25: I tried to restore the stock OS and now my device is stuck at the Kindle Fire logo. What happened?[/SIZE]It is most likely that you forgot to wipe the data partition (factory reset) in recovery before flashing the stock update.zip. As a result, you will need a factory cable to get into fastboot so you can reinstall custom recovery and flash the update.zip properly.​[SIZE=+1]Q26: What is a factory cable? What is it used for? How do I use it?[/SIZE]A factory cable, not to be confused with the OEM USB cable that comes with the Kindle Fire, is a USB cable made to emulate a Motorola factory programming cable. With the Kindle Fire, it is an easy way to access fastboot mode, especially when no other options are available. To use it, while plugged into your computer, simply plug it into a Kindle Fire that has been completely powered down.​[SIZE=+1]Q27: Where do I find information on making or purchasing a factory cable?[/SIZE][Info]Making/Using a Factory Cable - or - SkOrPn ​[SIZE=+1]Q28: What needs to be wiped when installing a ROM?[/SIZE]When installing a minor update to a ROM, it is generally considered safe to just install the ROM without wiping anything. When installing a major update or a different ROM altogether, you must, at the very least, perform a factory reset in custom recovery, which wipes the data and cache partitions. Not doing so will usually result in major problems.​[SIZE=+1]Q29: I tried to install a ROM and now my device is stuck at the ROM's boot animation. What happened?[/SIZE]It is most likely that you forgot to wipe the data partition (factory reset) in recovery before flashing the ROM. If you have FireFireFire installed, you can use the power button at startup to access custom recovery and reinstall the ROM properly. Otherwise, you may need a factory cable to get into fastboot mode so you can access or (if needed) install custom recovery, then reinstall the ROM properly.​[SIZE=+1]Q30: Is it true that letting the battery die will reset the device and fix whatever problem I'm experiencing?[/SIZE]NO!!! NO!!! NO!!! NO!!! The flash memory storage of the Kindle Fire is capable of holding data without ANY power until your grandchildren's grandchildren have their own grandchildren...probably even longer. Not to mention, a dead battery will cause much bigger problems than you ever had to begin with, on top of the problems you had to begin with. Whatever problem you're dealing with, it is always best to avoid letting the battery die at all costs.​[SIZE=+1]Q31: Why is my boot logo flashing every 5-10 seconds?[/SIZE]You have a near dead battery. The most effective way fix it is to power the device down by holding the power button for 10 seconds, plug the device into a power source, then IMMEDIATELY hold the power button until it shuts off again. If it shuts off and stays off (no display, no led), let it charge for at least half a day. Otherwise keep trying, or get another battery.​[SIZE=+1]Q32: My Kindle shows the boot logo for 20-30 seconds and either goes to a black screen or reboots itself.[/SIZE]You either don't have a ROM in place or your ROM is seriously malfunctioning. If you have FireFireFire installed, you can use the power button at startup to access custom recovery and install a ROM . Otherwise, you may need a factory cable to get into fastboot mode so you can access or (if needed) install custom recovery, then install a ROM.​[SIZE=+1]Q33: When my Kindle Fire boots, a message keeps popping up, preventing me from doing anything, how do I fix it?[/SIZE]This is either caused from not wiping the data partition (factory reset) in recovery before flashing a ROM or you installed an app that is incompatible with the Kindle Fire and it is causing problems. If it the latter is true, use ADB to access the shell and locate and remove the offending app. Otherwise, if you have FireFireFire installed, you can use the power button at startup to access custom recovery and reinstall the ROM properly. If not, you may need a factory cable to get into fastboot mode so you can access or (if needed) install custom recovery, then reinstall the ROM properly.​[SIZE=+1]Q34: My Kindle Fire does not power on or show any outward signs of life; no display, no sound and no LED when plugged in. What does this mean?[/SIZE]There was a problem while installing a custom bootloader, or the bootloader partition was, in some way, compromised and the device was shut down before it was fixed. If the device is a 1st generation Kindle Fire, you have to use Firekit or usbboot along with the shorting trick to reinstall the bootloader. If the device is a 2nd generation Kindle Fire, unfortunately there is nothing you can do about it.​[SIZE=+1]Q35: I have a question about a particular ROM but I can't post in the Development section. What can I do to get the help I need?[/SIZE]The Development forum is for sharing ideas on development. If you have a question about a particular ROM, ask it in the Q&A section. Contrary to what some may believe, the Developers of this community are very aware of questions being asked in the Q&A section, especially when it comes to their ROMs.​*​Forum Rules | New Users Guide | XDA Tour | Report Posts​This FAQ is part of a Recognized Contributor Group Initiative. Please look for a similar FAQ thread when visiting another device forum.​

reserved

reserved - just in case

Nice job Soup

[Edit:] Tapatalk acting stupid again

Hi guys I no longer own a KF1 I have a KF2. But I am wondering if anyone would be able to confirm that /sys/class/leds/led-green exists? I am planning on building an app that connects up to your notifications and allows for the use of the charger light as a notification light. And of course it will require root
Sent from my Amazon Otter2 using Tapatalk

see op
Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, try to find an existing thread or create your own. Do not use this as a general help thread.
Click to expand...
Click to collapse

sd_shadow said:
yes it's there, charging is orange, charged is green, please start a new thread if you need more info.
see op
Click to expand...
Click to collapse
Ok thanks. I talked to hashcode and he said he might be adding that feature anyways so I guess I wont finish the app. Thanks anyways
Sent from my Amazon Otter2 using Tapatalk

NEED HELP......
i have a kindle fire hd that i rooted to kit kat no problem but now im trying to help my mom she has a 1st gen kindle fire with 6.3.3 on it, i know its a first gen cus i bought it for her brand new when it came out. so im trying to install jelly bean on it or maybe even kit kat but everything i see is for the 6.3.2 firmware and earlier could use a little help here maybe with downgrade to the 6.3.2 or figure out if there is a anything for the 6.3.3 firmware.. thanks

Please read first...
If you have additional questions or require more help, try to find an existing thread or create your own. Do not use this as a general help thread.
Click to expand...
Click to collapse

cavila1988 said:
i have a kindle fire hd that i rooted to kit kat no problem but now im trying to help my mom she has a 1st gen kindle fire with 6.3.3 on it, i know its a first gen cus i bought it for her brand new when it came out. so im trying to install jelly bean on it or maybe even kit kat but everything i see is for the 6.3.2 firmware and earlier could use a little help here maybe with downgrade to the 6.3.2 or figure out if there is a anything for the 6.3.3 firmware.. thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1859851
head here.
there are some kitkat rom for kindle fire. take note that there is a new development for kindle fire:
read THIS and THIS, please read carefully and throughly.
as for otterX partition there are two type of partition.. larger system partition (smaller data partition), and smaller system but larger data partition.
as for file system there are ext4 and f2fs..
choose which one you want to use first, and then ask or if you already know, download the correct bootload, recovery, and ROM that support it.

hello,
-I have bootloader v2.05, otterx mode, twrp 2.8.3.0,
- i wiped everything else,
-now I can't mount SDcard (TWRP)(unable to find storage partition to mount to USB) , ADB is 'unauthenticated' mode and can't transfer ZIP to flash any ROM
Please help: how to transfer ZIP / flash ROM via fastboot / change ADB into recovery mode so I can use push/pull
Any solution will work.
Best,

For1n said:
hello,
-I have bootloader v2.05, otterx mode, twrp 2.8.3.0,
- i wiped everything else,
-now I can't mount SDcard (TWRP)(unable to find storage partition to mount to USB) , ADB is 'unauthenticated' mode and can't transfer ZIP to flash any ROM
Please help: how to transfer ZIP / flash ROM via fastboot / change ADB into recovery mode so I can use push/pull
Any solution will work.
Best,
Click to expand...
Click to collapse
Do not use this as a general help thread.
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
see [How To] Fix Otter X Install Errors, Partition sizes, Unable to Mount System...

The every Kindle with firmware 6.3.2 and under is a 1st gen is slitghly outdated. 6.3.3 was released to the 1stgen.

MineMasterHD said:
The every Kindle with firmware 6.3.2 and under is a 1st gen is slitghly outdated. 6.3.3 was released to the 1stgen.
Click to expand...
Click to collapse
6.3.4
see 2015 - update-kindle-6.3.4_D01E_4120220 by sd_shadow

Related

I need help to fix my kindle fire

Hello i need some help to fix my kindle fire. I was using the kf utility to try and root my fire and some how deleted my system files so when it reboots it goes to the twrp screen and when I try to reboot from there it says there is an error and system wont boot. I just got my kf a week ago and I am perplexed with fixing it, being I am used to Android 4.0, I would be thankfull for any help i could get.
Thanks very much racerx....
Download a rom on your computer. Hook the fire up to the usb port. In twrp, mount the sdcard and push the rom to the kindle. Unmount and install the rom from twrp. Reboot and enjoy.
Sent from my Amazon Kindle Fire using xda app-developers app
racerx4468 said:
Hello i need some help to fix my kindle fire. I was using the kf utility to try and root my fire and some how deleted my system files so when it reboots it goes to the twrp screen and when I try to reboot from there it says there is an error and system wont boot. I just got my kf a week ago and I am perplexed with fixing it, being I am used to Android 4.0, I would be thankfull for any help i could get.
Thanks very much racerx....
Click to expand...
Click to collapse
In TWRP go to mount, and mount as a USB drive. Then side-load a rom into any of the sd card folders. Custom rom or if you want to return to stock Kindle, download the latest update, change it from a bin to a .zip file, and load that.
Then, still in TWRP, choose to install the rom you loaded, and let it go from there.
Hah, didn't see Ixthusdan's reply, or else I wouldn't have posted dup info, sorry!
Install this Jelly Bean ROM. Sweetest thing ever.
http://forum.xda-developers.com/showthread.php?t=1778010

How To Root Kindle Fire Running 6.2 +

CAUTION: MAKE SURE YOUR KINDLE FIRE IS NOT 6.3 OR ABOVE.
THIS WORKS ON 6.2 6.2.1 AND 6.2.2.
Hackers have been tweaking the Amazon Kindle Fire ever since the $199 tablet started shipping in November. It’s turned out to be a surprisingly hacker-friendly device, and users have figured out how to root the tablet, install the Android Market, replace the operating system with CyanogenMod and make many other changes.
But the latest Amazon software update could put a stop to all of that — at least temporarily.
Amazon is pushing out version 6.2.1 of the Kindle Fire software, and it users are reporting that it removes root privileges on tablets that have been rooted. Unlike previous updates, you can’t simply re-root the device using the SuperOneClick utility.
Update: There’s now a method for rooting a Kindle Fire running OS 6.2.1 or earlier. It’s a bit more complicated than using SuperOneClick, but it lets you root the tablet so you can install the Android Market or make other changes. You can also replace the bootloader and recovery which lets you flash custom ROMs such as CyanogenMod.
The Amazon Kindle Fire is designed to receive software updates automatically when a tablet is connected to a WiFi network, so if you have a Kindle Fire that’s running Amazon’s software (rather than CyanogenMod or something else), odds are you’re going to get stuck with this update soon whether you like it or not.
The good news for those that have no interest in rooting their tablets is that version 6.2.1 of the tablet’s software improves performance and offers some additional features such as the ability to remove recently used items from the carousel on the home screen.
If you do want to replace Amazon’s software with an alternate version of Android there’s more good news. It’s easier than ever to replace the Amazon software with CyanogenMod and prevent future software updates. If you want to do that, and if you haven’t already installed the 6.2.1 software update, turn off your WiFi and take the following steps.
Before you get started though, you should realize that if you replace the stock Amazon software you could void your warranty, you may damage your device (or at least put it into a state that’s hard to recover from without some advanced know-how), and you’ll lose access to some Kindle Fire features such as support for Amazon Instant Video and the Amazon Kindle Owners’ Lending Library.
1. Download and run the Kindle Fire Utility.
You’ll need to connect your Kindle Fire to a Windows PC with a USB cable to use the Kindle Fire Utility. You may also need to manually install the drivers included in the utility ZIP archive.
2. Choose the option for ZergRush to root the tablet.
3. Once that’s finished, choose the option to “Install latest TWRP Recovery.”
TWRP 2.0 makes it easy to backup and restore your device and install custom firmware. You can read more about it in our post on installing it manually, but Kindle Fire Utility makes the process much simpler.
When you install TWRP 2.0 it will also replace the Kindle Fire bootloader with a new one called FireFireFire which lets you enter recovery mode by pressing the power button during boot.
4. Download the latest build of CyanogenMod 7 (or the operating system of your choice. For the best version of CM7, check out the first post in Whistlestop’s thread on the xda-developers forum.
5. Copy the update.zip file to your Kindle Fire’s storage.
6. Turn off the Kindle Fire and then press the power button to start it up again.
7. When you see a yellow triangle with a fire in the middle, press the power button for about two seconds to enter TWRP 2.0.
7a. It’s a very good idea at this point to create a backup of your system.
7b. Tap the backup button.
7c. Select the items you want to backup. At the very least you should backup the system, data, and boot partitions.
7d. Tap the “Backup now button” and when the backup is complete tap the Main Menu button to return to the main menu. This way you can restore the stock Amazon software and all of your data and settings using the TWRP 2.0 restore function.
8. Tap the install button.
9. Use the file browser to locate the update.zip file you downloaded
10. Select the appropriate zip file.
11. Tap the Flash button.
12. Go back to the TWRP Home screen and choose reboot.
That should be all you need to do to install CyanogenMod 7 or other firmware. This should prevent your device from automatically downloading the latest Amazon software.
Note that the steps above will not install the Android Market or other Google apps on your device. To do that, just download the latest gApps.zip from goo-inside.me, place it on the “sdcard” portion of your Kindle’s storage, and follow the steps above to install it the same way you installed the update.zip file.
Credit To Liliputting And I Hope You Like This soupmagnet

[Q] Can't mount USB Mass Storage onto my PC as ICS has crashed on my Kindle Fire

I rooted my Kindle Fire using KFU 0.9.5 and flashed a custom ROM. It worked fine for a few days and then just crashed -- The options bar located on the bottom disappeared and the error message was: System UI has crashed. (I have attached two pictures for better clarity)
Also, whenever I boot up, there is no yellow flame that appears, it goes to the moving colourful discs straight on.
I tried using terminal emulator and entered many codes in some hope of mounting USB Mass Storage so that I can use KFU and restore my Kindle, but in vain.
I have tried EVERYTHING. I've been at this for 6 days now and am at wits end. :crying: I have read up close to a 100 articles; this was my last resort.
I just want to get the Kindle's stock OS back - no root, nothing.
And the only was is, I suppose, if I am able to mount my Kindle as USB Mass Storage onto my computer.
ANY help is appreciated!
AndroBoss.
I don't have a kindle but did you try wiping it and reinstalling it?
Sent from my SPH-L710 using xda app-developers app
jr71x said:
I don't have a kindle but did you try wiping it and reinstalling it?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
As it now runs on ICS, there is no Gingerbread for Kindle anymore on it. I can't wipe it clean from the device or atleast I don't know how to, please help?
All the wipes you should need to perform can be done in twrp recovery. Wipe factory reset , wipe cache , wipe dalvik and wipe the system. Reflash ROM , reflash gapps , reboot then system if prompted and you should be good to go.
Edit: failing to use the correct method to return to stock will just cause more problems. Rather than trying to go back to pure stock without fff and twrp I suggest you perform the above wipes and flash this instead http://forum.xda-developers.com/showthread.php?t=1439916 its just modified stock with Google play and it will not wipe out your recovery and bootloader.
Thepooch said:
All the wipes you should need to perform can be done in twrp recovery. Wipe factory reset , wipe cache , wipe dalvik and wipe the system. Reflash ROM , reflash gapps , reboot then system if prompted and you should be good to go.
Edit: failing to use the correct method to return to stock will just cause more problems. Rather than trying to go back to pure stock without fff and twrp I suggest you perform the above wipes and flash this instead http://forum.xda-developers.com/showthread.php?t=1439916 its just modified stock with Google play and it will not wipe out your recovery and bootloader.
Click to expand...
Click to collapse
Okay, I will flash what you suggested but that's the problem. I am unable to access TWRP recovery from my Kindle. When it boots up there is no yellow flame that appears as the custom ROM is ICS 4.0.
I tried mounting a twrp.img on to the SD Card after downloading one straight onto the tab but of no avail :/
What do you suggest? Is there any way I can get the TWRP Recovery to come up so that I can get the modified stock that you suggested?
Thanks for your help, regardless
Androboss1994 said:
Okay, I will flash what you suggested but that's the problem. I am unable to access TWRP recovery from my Kindle. When it boots up there is no yellow flame that appears as the custom ROM is ICS 4.0.
I tried mounting a twrp.img on to the SD Card after downloading one straight onto the tab but of no avail :/
What do you suggest? Is there any way I can get the TWRP Recovery to come up so that I can get the modified stock that you suggested?
Thanks for your help, regardless
Click to expand...
Click to collapse
I know you said you read "close to a 100 articles" in your OP, but I suggest you do a little more reading. Get yourself acquainted with the key software components of the Kindle Fire and how they work together. Some of the things you say in your posts suggest you would benefit from the first post here...
http://forum.xda-developers.com/showthread.php?t=1552547
- The yellow flame you are looking for is an older version of the FireFireFire (FFF) bootloader, but there is a newer/better version.
- The KF cannot go to "the moving colorful discs straight on" because the first thing you will see is the bootloader's bootlogo.
- You must determine what bootloader is currently installed on the device because it is key in determining how you can get into recovery (TWRP).
- "Mounting" sdcard means to make the storage space available to either the host computer or the Kindle Fire, but it almost always means the former. Your comment about having "tried mounting a twrp.img on to the SD Card" doesn't make sense.
My guess is you do not have FFF installed and the device is booting with the stock bootloader. Odds are you will still be able to boot into your current ICS system and execute an adb command to set the bootmode to recovery (5001). Then a reboot should take you into TWRP. At that point, you should try to mount the sdcard partition onto your computer and transfer the latest FFF and whatever ROM you want to flash. Be sure to install FFF as soon as possible. This will allow you to get back into TWRP even if your system software becomes unbootable. Only when you are comfortable with FFF and TWRP should you consider flashing another ROM onto the device.
In broad strokes, the above paragraph contains the steps you will take to get your device running properly again. If any part of it doesn't make much sense to you, I suggest you read the above article again. Then, you can figure out the specifics commands from the third post of the link above and the following...
http://forum.xda-developers.com/showthread.php?t=1638452
kinfauns said:
I know you said you read "close to a 100 articles" in your OP, but I suggest you do a little more reading. Get yourself acquainted with the key software components of the Kindle Fire and how they work together. Some of the things you say in your posts suggest you would benefit from the first post here...
http://forum.xda-developers.com/showthread.php?t=1552547
- The yellow flame you are looking for is an older version of the FireFireFire (FFF) bootloader, but there is a newer/better version.
- The KF cannot go to "the moving colorful discs straight on" because the first thing you will see is the bootloader's bootlogo.
- You must determine what bootloader is currently installed on the device because it is key in determining how you can get into recovery (TWRP).
- "Mounting" sdcard means to make the storage space available to either the host computer or the Kindle Fire, but it almost always means the former. Your comment about having "tried mounting a twrp.img on to the SD Card" doesn't make sense.
My guess is you do not have FFF installed and the device is booting with the stock bootloader. Odds are you will still be able to boot into your current ICS system and execute an adb command to set the bootmode to recovery (5001). Then a reboot should take you into TWRP. At that point, you should try to mount the sdcard partition onto your computer and transfer the latest FFF and whatever ROM you want to flash. Be sure to install FFF as soon as possible. This will allow you to get back into TWRP even if your system software becomes unbootable. Only when you are comfortable with FFF and TWRP should you consider flashing another ROM onto the device.
In broad strokes, the above paragraph contains the steps you will take to get your device running properly again. If any part of it doesn't make much sense to you, I suggest you read the above article again. Then, you can figure out the specifics commands from the third post of the link above and the following...
http://forum.xda-developers.com/showthread.php?t=1638452
Click to expand...
Click to collapse
WOW! Okay, thank you so much; I'll keep you updated. I'll do all this tonight! Cheers :good:

[Q] Kindle Fire bricked. Need Help

Hello, i need help with my kindle fire. before i bricked it, i already had rooted my kindle and was using the SmoothROM with TWRP 2.2.2.1 and FFFF ver. 1.4a. I wanted to install Ubuntu on my Kindle but because I needed 5 GB of memory to install it i wanted to factory reset but the amount of memory (4 GB) was still the same with the same downloaded apps and files i had before were still there. So, iwent to TWRP and erase everything and and i stupidly and accidently erased the SDCard and in the process all of my backups plus the ROM and other files were completely erased. So now, all i have is FFFF ver. 1.4a and TWRP. Now, I dont know what to do because 1: I dont have any system to use and 2: My computer cant read my kindle and its contents so i cant install or even copy a ROM or something to my Kindle because basically my Kindle is no longer on my computer and KFU doesnt recognize my Kindle. Please I need help because my battery will not last long. Does anybody know a way to restore my Kindle?
You should still be able to mount your sdcard in twrp and transfer a ROM. If you are having trouble doing so it could point to drivers or a mounting issue. Either way Soupkit is your best bet to remedy the problem as quickly as possible before your battery dies and then you have real problems http://forum.xda-developers.com/forumdisplay.php?f=1309 . Put it in recovery and charge it just watch to be assured that it is indeed charging, this will give you all the time you need to sort your troubles without panic.

[Q] entire system wiped no os stuck at screen

recently while "toying" with some system files (which i shouldn't have) i deleted my kindle fire package installer thinking that i could still use my
google play installer well i was wrong . so long story short i wiped my system using twerp now ever time i run at 4000 (normal boot) im stuck at title screen and cannot connect to usb.
Key notes:
1.I have twerp
2.my entire system is blank from what i know (although it has title screen and basic boot)
3.im stuck on title
4.i have a usb cable for it (not factory cable)
5.im scared as hell
Unless you have FireFireFire (blue Kindle Fire logo) installed, you need a factory cable.
jetfire245 said:
recently while "toying" with some system files (which i shouldn't have) i deleted my kindle fire package installer thinking that i could still use my
google play installer well i was wrong . so long story short i wiped my system using twerp now ever time i run at 4000 (normal boot) im stuck at title screen and cannot connect to usb.
Key notes:
1.I have twerp
2.my entire system is blank from what i know (although it has title screen and basic boot)
3.im stuck on title
4.i have a usb cable for it (not factory cable)
5.im scared as hell
Click to expand...
Click to collapse
If you used KFU to flash TWRP and root then it is my understanding that you have FFF. Excuse me if this is a silly question, but why not just mount sdcard in recovery, place a ROM on your internal storage, and gapps, and then flash both of them after doing the necessary wipes? You may lose some if not all of your data, but at least you Kindle will be fixed
Let me know if you need more detailed instructions.
Sent from my Kindle Fire with Tapatalk 2
SwoRNLeaDejZ said:
If you used KFU to flash TWRP and root then it is my understanding that you have FFF. Excuse me if this is a silly question, but why not just mount sdcard in recovery, place a ROM on your internal storage, and gapps, and then flash both of them after doing the necessary wipes? You may lose some if not all of your data, but at least you Kindle will be fixed
Let me know if you need more detailed instructions.
Sent from my Kindle Fire with Tapatalk 2
Click to expand...
Click to collapse
It may have taken me ages to reply to you, but that is indeed what I did I was like :"how did I not think of this " lol I may be late but thankyou.
jetfire245 said:
It may have taken me ages to reply to you, but that is indeed what I did I was like :"how did I not think of this " lol I may be late but thankyou.
Click to expand...
Click to collapse
Glad it worked for you

Categories

Resources