Related
Alright so i am currently running incredibly re-engineered 2.3. Recently incredibly Re-engineered 2.3.1 was released. My question is how can i upgrade to the newest version? Do i have to do a full wipe, install the new rom, then restore? Or can i just flash the new rom over the existing? I tried searching for an answer to this but i couldn't find one, so if this is a repost, please don't hesitate to point me to a different thread.
Im not 100% sure about that rom in particular but usually roms can be flashed over the older version. You SHOULD be able to just flash it normally with no wipe.
You actually dont have to update, the only thing added is compatibility to cwm 3+. Everything else is the same as 2.3. So unless youre using that its not necessary. I wont til theres anothr significant update.
Sent from my ADR6300 using XDA App
sweet i'm going to give it a shot. Ya i read that in the change log, but i wasn't sure in general how you would upgrade a rom, when a new version is released. Thanks for the help though
unless it says flashover I always do a wipe. Saves alot of headache down the road. It doesnt take long to set everything back up.
Sent from my Dell Streak 7
Not sure if its the fact i am running CM 7 or what but whenever i try a different kernel then there stock everything boots just fine but the touch screen doesn't work. I am lost and have no clue what to try.
What kernel are you trying to flash?
Sent from my ADR6300 using XDA Premium App
If running cm7, ya gotta flash a gingerbread AOSP kernel - try that.
Sent from my ADR6300 using XDA Premium App
I believe it was the AOSP kernel part that i was missing. I finally got a Invisiblek to install. Thanks for the help.
bjohnson8949 said:
I believe it was the AOSP kernel part that i was missing. I finally got a Invisiblek to install. Thanks for the help.
Click to expand...
Click to collapse
Invisiblek is the way to goon Gingerbread roms. I've flashed his newest with OMFGB 1.1.1, and it is awesome. No problems snappy, excellent battery too!
Sometimes people (including me) mix up AOSP and Sense, sadly they don't like to play with others if you install them with the wrong rom. Racists, pft.
I have only had the phone about a week now so I have had a lot to learn. So far everything seems good now and I am happy. Now if i could just get better battery life lol.
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746 I am getting same issue installs fine boots. Then when I try to unlock screen I get nothing. I have HtC incredible running cm 7 rc 3
clockworkmod 3.0.0.8
radio 2.15.00.11.19
If you need anymore information let me know.
I am doing the following for install.
reboot to recovery
clear cache
clear dalvik cache
install zip from sd card
Thanks for all the help already
bjohnson8949 said:
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746 I am getting same issue installs fine boots. Then when I try to unlock screen I get nothing. I have HtC incredible running cm 7 rc 3
clockworkmod 3.0.0.8
radio 2.15.00.11.19
If you need anymore information let me know.
I am doing the following for install.
reboot to recovery
clear cache
clear dalvik cache
install zip from sd card
Thanks for all the help already
Click to expand...
Click to collapse
It worked fine for me...and still working
Maybe download it again and then try it. Just as a question are you by chance trying to flash a froyo kernel and not realizing it? Its gotta say gb or gingerbread
Sent from my ADR6300 using XDA App
I was trying to flash Tiamat Version 3.3.3-sbc -- Current Gingerbread with SBC from the link I posted.
bjohnson8949 said:
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746
Click to expand...
Click to collapse
bjohnson8949 said:
I was trying to flash Tiamat Version 3.3.3-sbc -- Current Gingerbread with SBC from the link I posted.
Click to expand...
Click to collapse
The link you provided is the EVO kernel. Have you tried the Inc kernel?
Evo: http://www.thebcblends.com/cayniarb/Kernels/evo/Tiamat_Evo-v3.3.3-sbc.zip
Inc: http://www.thebcblends.com/cayniarb/Kernels/inc/Tiamat_Inc-v3.3.3-sbc.zip
The zip files have different contents.
EDIT - I just realized the thread you linked has both the Inc and the Evo versions. I saw that it was in the Evo subforum and jumped to the wrong conclusion. In any regard, make sure you are flashing the right one.
I just flashed
Inc: http://www.thebcblends.com/cayniarb/Kernels/inc/Tiamat_Inc-v3.3.3-sbc.zip
and i am still having same problem. Any ideas ?
Edit: Messing around with rooted phones is something I have just started so it maybe something simple I am missing.
Not sure why my cell doesn't seem to like other kernels but
http://forum.xda-developers.com/showthread.php?t=905873
seems to be doing just fine so i will leave it alone.
Thanks for all the help.
Have you tried Incredikernel? Kernels are really a matter of personal preference, but Incredikernel seems to be one of the best. (And also my favorite.)
I gave it a shot a while back and had trouble. My issue is that he touch screen doesn't respond. Incredikernel is recommended in several places but i had zero luck with it supporting the screen. I have started to wonder if its support for slcd.
I will try it again and see what happens.
First a little background. I am not new to the android world whatsoever. I don't post much but have been lurking for years. I had a Verizon GS3 and just recently switched to T-Mobile a few days ago and obviously bought a T-Mobile GS3. My vzw phone had no problems. But for some reason my T-Mobile phone will not boot any kernel I try to flash. Roms flash fine but when I flash a kernel everything goes fine in recovery but my phone won't boot past the splash and I end up having to restore a backup. I know I'm flashing the right kernels. I am on touchwiz based ROMs and haven't tried any aosp Rom because for the first time ever I actually prefer an OEM skin to aosp. So basically am I missing something obvious. Anyone else having thus problem. On Verizon I had to root and unlock the bootlosder. From what I understand tmobiles bootliader was not locked down and all I had to do was root. Like I said. I've tried every touch wiz Rom and every touch wiz kernel with each Rom and none will boot past the splash screen. I always wipe dalvik and cache but even tried wiping data every time too and keep getting the same result. Any input would be appreciated. . Thanks in advance.
Sent from my SGH-T999 using xda premium
Shouldn't need to do any wiping of any kind. I only use AOSP/AOKP, though. May I ask why you even bother with custom kernels? They honestly seem like a waste of time to me.
Im just flash happy. Like to try them out. I've been on Verizon for many Years and am used to the developers over there. I'm still getting used to the devs over here. Don't know any of there work. I'm sure its all good though. Been using imoseyons lean kernel since the thunderbolt back in the day and have stuck with them. Just my personal preference. I'd like to try some of tmobolrs kernel devs work but like I said I can't get a single one to boot.
Sent from my SGH-T999 using xda premium
What kernels have you tried to flash? There are a couple that have ICS builds. Also, what version of CWM are you using?
I've tried all the tw kernels. Every single one with 2 different ICS tw ROMs. I'm not using the leaked jb tw. I'm stickung with the more stable ICS ROMs for now. I just don't understand. I've tried every one. I've been flashing a long time and don't get it. Im kinda new to Samsung though. First Samsung was the galaxy nexus. Didn't ever use Odin with it. Does anyone flash kernels with Odin. Maybe I should try that. And to answer your question I've tried twrp and the latest version of cwm from rom manager. And of course I'm using the ICS TW version of the kernels im trying.
Sent from my SGH-T999 using xda premium
It could just be your phone doesn't like them. There is another guy on CM10 and AOKP that can't get custom kernels to boot either.
Sent from my Nexus 7 using Tapatalk 2
The kernel source code was never released for any build from UVALH2 and beyond. So most of our kernels will only work with UVALEM and UVALG1 builds.
We got kind of lucky I think and ktoonsez att kernel was brought over and works. I think there's one or two others that work now too.
As far as described here go I think we've got some of the best! For an outstanding rom you should try FreeGS3. It works with most of the kernels and is an awesome stable rom. If you want a later build try wildcards XquiziT v70 based on UVALH2. Use ktoonsez kernel with it.
And just to note, the stock kernel is surprisingly good. So give it a fair shot as well. Though I can definitely see some potential advantages of custom ones as well.
Sent from my SGH-T999 using xda app-developers app
Thanks for all the info. But now I can't even get any other ROMs to boot. I don't get it. I keep having to restore my Xquizit v20 back up. Its driving me nuts
Sent from my SGH-T999 using xda premium
jasonpantuliano said:
Thanks for all the info. But now I can't even get any other ROMs to boot. I don't get it. I keep having to restore my Xquizit v20 back up. Its driving me nuts
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Have you done full Wiping?
Wipe Data/Factory Settings
Wipe cache and dalvik
Flash Rom
Fix Permission
Reboot and don't touch it for 10 minutes
Reboot.
Wipe cache and dalvik
Flash Kernel (Must be compatible with ROM)
Fix Permission
Reboot and don't touch it for 10 minutes
Reboot.
See if this will work. Sometimes you have to let it breathe so it can adjust itself.
Have you tried uding odin to flash MrRobinsons root66 UVALH2? This will take you to fresh full stock plus root. Then try roms again.
Sent from my SGH-T999 using xda app-developers app
Whatever you do................
Be sure to double check before you flash that kernel. Had my first SGS3 for 12 days before hard brick set in. Terrible disease it is.......! I had to adopt a replacement shortly after to cope with the pain of the loss. Back on my feet again now though and soarin' higher than giraffe vagina on the things I learned in my days off for mourning. I can tell ya I've personally flashed the lean kernel and kt-747 with no issues. My problems were with siya mainly.
Guys, I have a serious problem.
It's similar to the one of the thread-opener.
The diference is that I cant get ANY ROM to boot, WITH the stock kernel.
And i do like the guide says: wipe/factory reset, wipe chache, wipe dalvik cache and then flash the ROM.
Everything works fine til the ROM finished flasing and runs a reboot.
My S3 shuts down screen, then turns screen on with the "Samsung Galaxy SIII-GT-I9300" and then thats it!
All i can do is to go in download mode or recovery mode. I can also flash CWM and so on, but after flashing ROMs it won't boot!
Is it possible that i broke the device by formating internal sd-card with the stock recovery tool?
Did it, after I tried to install Wickedv6 ROM and after both times when it rebooted it just reinstalled stock ROM. So i thought, ok delete the internal sd-card, so no stock ROM on it any more.
Also tried this ROM: http://forum.xda-developers.com/showthread.php?t=1875923
Same problem.
Also tried to fix the problem by rooting and then flashing ROM. No help.
Please help guys!
Best regards
ke-ironman said:
Guys, I have a serious problem.
It's similar to the one of the thread-opener.
The diference is that I cant get ANY ROM to boot, WITH the stock kernel.
And i do like the guide says: wipe/factory reset, wipe chache, wipe dalvik cache and then flash the ROM.
Everything works fine til the ROM finished flasing and runs a reboot.
My S3 shuts down screen, then turns screen on with the "Samsung Galaxy SIII-GT-I9300" and then thats it!
All i can do is to go in download mode or recovery mode. I can also flash CWM and so on, but after flashing ROMs it won't boot!
Is it possible that i broke the device by formating internal sd-card with the stock recovery tool?
Did it, after I tried to install Wickedv6 ROM and after both times when it rebooted it just reinstalled stock ROM. So i thought, ok delete the internal sd-card, so no stock ROM on it any more.
Also tried this ROM: http://forum.xda-developers.com/showthread.php?t=1875923
Same problem.
Also tried to fix the problem by rooting and then flashing ROM. No help.
Please help guys!
Best regards
Click to expand...
Click to collapse
This isn't the I9300 forum, but if you flashed a T999 rom, you bricked your phone.
Aerowinder said:
This isn't the I9300 forum, but if you flashed a T999 rom, you bricked your phone.
Click to expand...
Click to collapse
Wow, you scared the **** out of me
But i just tried to flash stock ROM: http://forum.xda-developers.com/showthread.php?t=1646610
It worked out!
What is the right forum for my GT-I9300 to post then?
And why isn't any other ROM working?
The forum you got that stock rom from is the international one. This is the US Tmobile T999 forum. The two phones are NOT compatible.
Only flash, well...anything, from that forum. Our roms will brick yours and vice versa.
Sent from my SGH-T999 using xda app-developers app
Hi there!
I have had an s3 for a few days now and love it!.
Any TW rom and my camera works just fantastic.
Any cm10/aokp/miui/etc rom and I just cant use the camera no matter what app I use to try it, whether it be the built in app or camera360/etc.
Driving me nuts and would love someone to help me. Anyway research I have done hasnt told me what I'm doing wrong.
I wipe cache/dalvik/factory reset/system before each rom. I have tried different kernels but nothing has helped.
Any gurus out there have any ideas on what I can do to fix this?
Your install process would be and please link the files you are flashing... I'll try and help you. I've seen a few people mention this the past couple days.
The most recent I tried to flash was Illusion v1.1.18 - (d2tmo, d2att & d2vzw) - 1|18|13 from this thread:
http://forum.xda-developers.com/showthread.php?t=2037028
I downloaded Illusion-v1.1.18-d2tmo.zip and gapps-jb-20121212-signed.zip.
I went into recovery which is twrp and the most recent version. I installed it with the goo.im app.
When in recovery I did:
1) Factory Wipe
2) Wipe Cache
3) Wipe Dalvik
4) Wipe System
I would then click Install and select the rom file, and after it succesfully flashed I would then flash the gapps file. All were successful.
I would then reboot and the rom would boot up fine. I setup my google account and all that then for the heck of it I would reboot.
I then would try the camera app and it would complain that it couldnt connect to the camera basically. I went into the play store and tried a free version of camera 360, puddle camera, etc and all would not work.
I went back into recovery, wiped cache and dalvik again, hopped on one foot, faced east, and clicked my heels together. Upon reboot the camera does not work.
I have wiped all that and tried to install [Kernel][JB] Leankernel: Minimalistic Kernel for D2TMO/D2ATT (AOSP) v2.3 [1/17/13] which flashed fine. Upon reboot I could change voltages to undervolt, mess with governors but cameras still do not work.
I have a backup of two TW roms (one stock) and both of the those roms work beautifully with whatever camera I try, including the built in/stock camera.
I hoped I didn't leave out something. If there is something I missed than I'm an idiot because it seems like I am really missing something.
Thanks for your help.
I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery... Are you using the same Gapps over and over on each try? Might wanna try a different set.
mt3g said:
I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery.
Click to expand...
Click to collapse
I did that earlier with no luck.
I just force stopped on gallery, wiped cache/data, rebooted, and I tried the camera only to get the same message.
Thank you for that tip but I will continue my research also.
Just because I looked at about phone.
Model of phone is SGH-T999 (just in case someone thinks I'm in the wrong forum"
Baseband version is T999UVDLJA
Kernel is of course 3.0.59-leanKernel
AOKP Version is Illusion v1.1.18 d2tmo
Build number is aokp-d2tmo-userdebug 4.2.1 (I truncated the rest)
mt3g said:
Are you using the same Gapps over and over on each try? Might wanna try a different set.
Click to expand...
Click to collapse
I have downloaded this gapps twice for the last rom http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip.
For the miui rom there was a gapps that was specific to miui and had miui in the name. The miui rom's camera didnt work.
I'll look for a different gapps if that might be the problem but since I have tried a couple roms and a few different gapps I feel that might not be the issue.
I still will give it another try though. Just have to find another gapps to try.
try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use
mt3g said:
try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use
Click to expand...
Click to collapse
I redid the entire install process from scratch using that gapps and the camera is still not working.
Ugh. Thanks for the link.
WIll keep trying :/
run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!? Shots in the dark right now, just trying to help as I've never seen this issue before solved.
mt3g said:
run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!?
Click to expand...
Click to collapse
It had JB on it when I got it almost 2 days ago. I tried to do an OTA when I got it but it said I was up to date.
Let me do a restore to stock and see what version it is.
Edit: Restored stock. Says android version 4.1.1, Kernel 3.0.31-370274se.infra, Build number JR003L.T999UVDLJA
Was it already rooted?
Sent from my SGH-T999 using xda premium
mt3g said:
Was it already rooted?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
It was new, out of the box. I watched the guy unrap it. It is one of the newer grey metal color looking ones. It was not rooted. I did that. Should I do an Odin to bring the device back to complete stock and start from scratch?
Will take a while since I have no idea where to start with all that
Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium
mt3g said:
Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
You have been helpful. In a bit ill reflash a cm/aokp rom and logcat it.
This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium
mt3g said:
This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though
dccoh said:
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though
Click to expand...
Click to collapse
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium
mt3g said:
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.
dccoh said:
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.
Click to expand...
Click to collapse
Most definitely sir. I don't understand why that file was getting screwed over. Glad it all got worked out for you.
Sent from my SGH-T999 using xda premium
I'm not sure if its just my phone, had this problem for a while now, but when it occurs, i usually just flash another rom, but basically, when it comes to my rom and flashing a rom that comes with a custom kernel, its a no go what so ever, its force close central, and boot loops and all that, no idea why, but my phone just simply doesn't play nice with any custom kernels at all, started with Jellybomb, use to love it, worked perfect, no problems, then when it updated to i believe 10, 11, not precise on what version, and he used a custom kernel, then bam, tried everything, no luck, and couldnt use that rom with my phone anymore, or any other rom that comes with custom kernels, and still cant, and i guess its time to mention it to verify if this happens to anyone else.
Parkourkid93 said:
I'm not sure if its just my phone, had this problem for a while now, but when it occurs, i usually just flash another rom, but basically, when it comes to my rom and flashing a rom that comes with a custom kernel, its a no go what so ever, its force close central, and boot loops and all that, no idea why, but my phone just simply doesn't play nice with any custom kernels at all, started with Jellybomb, use to love it, worked perfect, no problems, then when it updated to i believe 10, 11, not precise on what version, and he used a custom kernel, then bam, tried everything, no luck, and couldnt use that rom with my phone anymore, or any other rom that comes with custom kernels, and still cant, and i guess its time to mention it to verify if this happens to anyone else.
Click to expand...
Click to collapse
Try kernel cleaner
Sent from my SPH-L710 using xda premium
xblackvalorx said:
Try kernel cleaner
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
where would i find that?, and what specifically does it do?
i dont want to hijack a thread but also dont want to start a new one since there is this one. has any cspire s3 users flashed a different kernel and had success with it. im on the latest pacman rom and want a diff kernel. ive flashed one before and got a softbrick. just curious.
@ IonIcone, Keep the thread to the user that's asking the question.
Search the whole forum first / search it online, if it's a no go on both parts, then start a question
thread of your owns.
@ ParkourKid93
KernelCleaner can be downloaded here.
http://forum.xda-developers.com/attachment.php?attachmentid=1319515&d=1347395869
scripted by mattrb, you can thank him for that file.
When using kernels make sure it's for the right version
JB or AOSP. and also make sure its for the right version
4.1.x or 4.2.x
Usually when you're also installing a rom with a dif kernel ( and you CAME from a rom with STOCK kernel )
you'll need to wipe cache and dalvik cache, and re-set permissions via Custom Recovery.
If those don't work, search the original ROM thread for a [Q] of the same as yours and see if there was a fix / reply for that.
If all else fails, contact the dev of the rom with your specific issue.
I've been switching between kernels and JB versions and i've never ran into this issue. Anthrax, K747, Agat's and Stock Optimized.
Have you tried odin flash restore to stock LJ7 and re-installing the rom as well?
ionicone said:
i dont want to hijack a thread but also dont want to start a new one since there is this one. has any cspire s3 users flashed a different kernel and had success with it. im on the latest pacman rom and want a diff kernel. ive flashed one before and got a softbrick. just curious.
Click to expand...
Click to collapse
No problem bro, does sound like you flashed a wrong kernel for your phone, but like spark said, look around, their is a lot of topics on soft bricked phone, you will deffinatly find something on it
Sent from my SPH-L710 using xda premium
Spark91 said:
@ IonIcone, Keep the thread to the user that's asking the question.
Search the whole forum first / search it online, if it's a no go on both parts, then start a question
thread of your owns.
@ ParkourKid93
KernelCleaner can be downloaded here.
http://forum.xda-developers.com/attachment.php?attachmentid=1319515&d=1347395869
scripted by mattrb, you can thank him for that file.
When using kernels make sure it's for the right version
JB or AOSP. and also make sure its for the right version
4.1.x or 4.2.x
Usually when you're also installing a rom with a dif kernel ( and you CAME from a rom with STOCK kernel )
you'll need to wipe cache and dalvik cache, and re-set permissions via Custom Recovery.
If those don't work, search the original ROM thread for a [Q] of the same as yours and see if there was a fix / reply for that.
If all else fails, contact the dev of the rom with your specific issue.
I've been switching between kernels and JB versions and i've never ran into this issue. Anthrax, K747, Agat's and Stock Optimized.
Have you tried odin flash restore to stock LJ7 and re-installing the rom as well?
Click to expand...
Click to collapse
I actually tried that same exact kernel cleaner this morning, I searched and found it, had no luck with it though, and for the 'choosing the right kernel', it comes built in with the ROM, its the jelly bomb 14 ROM I'm referring to, also did wipe both caches and fixed permission, still no luck, I want to believe its my phone itself though, because I know it wouldn't be the ROM, I deff trust the ROM and developer obviously, and used his work before, but that's when he didn't use a custom kernel, but when he included the custom kernel built in, I believe jellybomb 10, or 11, then it was the last time I could of flashed any of his Roms, I do remember having similar problems with other Roms that uses custom kernels also, the only kernel my phone plays great with, is the stock optimized, and the cyanogenmon kernels, but ktoons and agats, and even anthrax (when I was using freeza fregs3, just went no go on my device
Sent from my SPH-L710 using xda premium