Related
Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.
did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.
Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
+
Yes this way usually works. I've tested this way.
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible
bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem
same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:
I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse
Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse
Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Reserved for updates
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
iowabowtech said:
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
Click to expand...
Click to collapse
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
bk201doesntexist said:
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
Click to expand...
Click to collapse
Yup, tried it but its still the same. Fastboot still dosent work and relashing packaged factory images in odin dosent fix the fastboot
Sent from my GT-I9100 using xda premium
Saw a Jtag service nearby and thinking of sending it in. Its roughly after conversion from RM(Malaysian Ringgit) around USD$90. Possible recovery from the issue?
Sent from my GT-I9100 using xda premium
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
override182 said:
Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
chadouming said:
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
Click to expand...
Click to collapse
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
killersloth said:
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
Click to expand...
Click to collapse
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
override182 said:
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it. Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options. But that would be strange that adb work on safe mode. There is probably a way to that with adb but you will have to google it. Tell your friend to follow instruction next time. And ffs, do not use odin ! (Little idea too, try to get in fastboot not connected on PC and wait a few minutes then see if you can move with the volume button, then try to connect it on pc)
chadouming said:
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it.
Click to expand...
Click to collapse
Yes i have already did that few times. Few times of ICS factory image and few with JB. All are repacked version provided by chainfire. Its the full package not the software only with stripped bootloader n recovery. Its still the same
Sent from my GT-I9100 using xda premium
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
killersloth said:
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
Click to expand...
Click to collapse
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
override182 said:
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
killersloth said:
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
Click to expand...
Click to collapse
Yes i had, still boots to safe mode and the fastboot is still dead. Yes ive tried adb reboot bootloader but its dead in fastboot, again.
Sent from my GT-I9100 using xda premium
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
killersloth said:
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Click to expand...
Click to collapse
Tried yesterday, nothing happened
Sparx639 said:
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
Click to expand...
Click to collapse
First tried pda only with auto reboot, no gooding. The i tried with booloader, no good. Then bootloader only, still no good. Then i tested all including pit file, still no good.
Update, sent in for Jtagging few min ago. The phone is not with me now and ill get it back in 3days working or not. I shall report in back after 3 days. Thanks to all by giving suggestion and ideas. See u guys again in 3 days
Sent from my GT-I9100 using xda premium
chadouming said:
Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options.
Click to expand...
Click to collapse
adb does not work in download mode/bootloader. adb only works when adbd (adb service) is started, and that happens in android boot process. it means android debug bridge.
sent from my i9250
Sorry for the long delay to anyone waiting for the answer/status.
Jtag cant fix it. Returned the device to a friend. Prolly a mobo replacement is the solution but its damn pricy here in Malaysia. It costs 80% of the price to get a new Gnex.
Hell yeah and thx to everyone supporting this.
Sent from my GT-I9100 using xda premium
Hello my friends.
I got a Galaxy Note II here - but my sister decided to play with it and now its locked on the 'too many wrong patterns screen'.
To make things even worst i haven't associated it with a google account (i recently bought it from a friend of mine).
When i try to hard-reset it the phone goes to the famous android logo with red exclamation - i think he rooted the phone and didn't told me.
Anyway when i get on this screen if i press the 'back' key on the phone i can access the 'Android System Recovery' - but i can't select any option.
I know i should use vol up/down to scrool betweeen options and power to select - but i press power and nothing happens.
Tried also pressing the menu button - nothing happened also.
Another problem is, for some reason i don't know the phone won't connect to my computer - only in charge mode.
Tried tons of things lots of times but it isn't showing up no matter what i do.
I tried also to call me from another phone and get in any menu - but when i do that i can only select normal options (send an sms, refuse call, accept).
I would like to hear suggestions from you guys since i've ran out of resources - i don't know what else i can do in order to recover the phone.
Thanks in advance
additional note: i just know its model is i9220+
It accepts WCDMA and a GSM SIM.
Pablo
oh yeah
those are the things i readed in order to find *ANY* solution:
http://forum.xda-developers.com/showthread.php?t=1420273
http://forum.xda-developers.com/showthread.php?t=1946968
http://forum.xda-developers.com/showthread.php?t=817703
http://forum.xda-developers.com/showthread.php?t=997974
http://forum.xda-developers.com/showthread.php?t=1266172
http://forum.xda-developers.com/showthread.php?t=1266172
if you don't have any important stuff on the phone...why don't you just flash it with stock firmware using Odin?? in download mode?
Sent from my GT-N7105 using Tapatalk 4
dead soul said:
if you don't have any important stuff on the phone...why don't you just flash it with stock firmware using Odin?? in download mode?
Sent from my GT-N7105 using Tapatalk 4
Click to expand...
Click to collapse
This is what i want.
But my computer do not detect the phone so i can't go into download mode.
I don't have anything important there - not worried about what is on its memory.
like i said when i plug the phone into the computer it only starts charging and nothing more.
is there 'any trick' i can try heh ?
ps: i installed kies, uinstalled, installed samsung usb drivers, installed, etc...well what i mean is that i tried most of those tricks to get the phone detected but no success - maybe flashing directly from my SD ?
also - i 'suspect' my phone is that n7100 . since i don't have its manual and can't access its menu either i just suspect because its from brazil and those n7100 models are like 'international'.
pablobhz said:
This is what i want.
But my computer do not detect the phone so i can't go into download mode.
I don't have anything important there - not worried about what is on its memory.
like i said when i plug the phone into the computer it only starts charging and nothing more.
is there 'any trick' i can try heh ?
ps: i installed kies, uinstalled, installed samsung usb drivers, installed, etc...well what i mean is that i tried most of those tricks to get the phone detected but no success - maybe flashing directly from my SD ?
also - i 'suspect' my phone is that n7100 . since i don't have its manual and can't access its menu either i just suspect because its from brazil and those n7100 models are like 'international'.
Click to expand...
Click to collapse
ok from how you are explaining stuff I'm not sure if you understand the flashing procedure thoroughly and risk involved
1. flashing can be risky
2. you need to download Odin example version 1.8
3. when your phone just powers on you need to know the EXACT model number example N7105 or N7100 or any other version..this is very important as if you flash a wrong firmware you could destroy your phone completely
4. find a stock ROM for your phone on xda or at samfirmware.com
5. install Samsung drivers or install Samsung kies but while Odin is on Samsung kies services must be closed
6. keep your phone in download mode by switching off your phone then HOLD CENTER/HOME BUTTON + VOLUME DOWN + POWER BUTTON
7. your phone may warn you and I believe may ask you to press volume up button to continue
8. then you are now in download mode.
9.open Odin
10. connect your phone to your pc via USB cable..give it time to register/install itself as a new hardware..etc etc as you may see new hardware detected pop up if running on Windows
10. a yellow COM port will appear on Odin showing the phone is connected
11. place the stock ROM file on the PDA section UNTICK REPARTITION , TICK REBOOT
12. this should flash your phone....however my procedure is a vague way of how to go about it... you may need to see a detailed step by step procedure on XDA if you are new to this.
I take no responsibility for any damages...I hope you almost everything we do here on XDA had risks involved
or the safer option take to a Samsung repair center!!
Sent from my GT-N7105 using Tapatalk 4
To get into download mode all you need to do is turn of the phone and hold power home volume down until you see the warning sign.
Sent from my SAMSUNG-SGH-I317 using xda premium
Put device on download mod and tell us what information it displays
You need not to connect device with PC to get downbload mode. Do this.
Vol Down + Home + Power
then vol up in warning screen to finally get download mod.
dr.ketan said:
Put device on download mod and tell us what information it displays
You need not to connect device with PC to get downbload mode. Do this.
Vol Down + Home + Power
then vol up in warning screen to finally get download mod.
Click to expand...
Click to collapse
Okay
when i put the device into download mode (vol down + home + power) - it goes to a 'factory mode'
then options i have here are:
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
And i can't choose any of 'em , no matter what i press.
Same happens when i go into recovery mode.
For getting into recovery o mode i i press the following combination: vol up + home + power
Then i get the android logo when a red exclamation - but when i press the 'back' button i can get into the "Android System Recovery <3e>", where i have the following options:
Reboot System Now
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
and same thing - i can't select any of 'em - no matter what button combination i press.
I tried plugging the phone into three computers none of 'em detected the phone.
Sometimes after many power on/off the computer detects it but instantly loses also - its something very quickly.
I can't get into any of the menus of the phone since i'm stuck in the 'too many wrong patterns' screen and i have no associated google account.
Also when i plug the phone in the pattern screen the only thing it says its about charging - nothing about plug in usb or anything like that.
I'm a bit used with flashing (did it a lot on my RAZR XT910) and i know all risks.
I've also found out my note ii is model GT-N7100 (this is the one sold in brazil) - i couldn't get its manual but my bet is going to be this - samsung service center won't repair the phone without the fiscal coupon .
I'll try more and keep this post update - but if anyone got an hint about this just tell me
Thanks in advance
Pablo
Your device seems to be clone one and not original N7100.
Have you purchased from authorized centre?
Sent from my GT-N7100 using xda premium
Your device is not a Samsung phone, you said as much in your first post.
Asking us to help is pointless, you need to talk to other clone owners and see what they have done.
muppetmania said:
Your device is not a Samsung phone, you said as much in your first post.
Asking us to help is pointless, you need to talk to other clone owners and see what they have done.
Click to expand...
Click to collapse
Oh okay.
I tought it also but wasn't sure.
I'm really sorry for taking your time
It was looking like Samsung because of its back
There's an stick with:
MODEL: i9220+
FCC ID: A3L SHI9220+
For information call: 1 888 987 4357
Bluetooth
CE01688
IMEI
and Made in Korea
There are also entries to:
WCDMA SIM
GSM SIM
and SD Card
But when i power it on there's nothing related to Samsung in fact - i never get anything related to Samsung.
Only android logo like a rocket.
It seems to be running an android 4.1 because of the interface
Anyway i'll see what i can do and thanks in advance for all the help
Again, sorry for taking your time.
Pablo
EDIT:
A Thhread talking about my phone:
http://forum.xda-developers.com/showthread.php?t=1909516
It seems its a Note II Clone really.
I'll keep searching information around XDA and google.
Again, thanks in advance
ok i see lots of threads about G2 stuck at LG logo with no download mode etc but none specific to my situation so figured id start my own.
my phone is stuck at the lg logo when i try to boot, when i try to go to download mode it shows the blue dots but windows, flash tool, nothing will recognize the phone as being plugged in, and not even the little sound windows makes when a usb device is plugged in, its been a little while so i cant remember EXACTLY what the last thing i did that bricked it was, something i did on command line with aboot something, i can try to dig it up if absolutely necessary but it would take some digging...when i try to boot into recovery it freezes at the "loading recovery screen, when i try to go to download mode it sticks at the blue dots and wont respond to anything, when i try to do a factory hard data reset it says "hard reset processing" or something similar then freezes there, ive tried reinstalling the drivers, using different pcs, read through countless threads, but have had no luck, any ideas what i can do to unbrick my brand new g2?? thanks in advance
Change PC and try
Sent from my XT1022 using Tapatalk
xbabyboy4021x said:
ok i see lots of threads about G2 stuck at LG logo with no download mode etc but none specific to my situation so figured id start my own.
my phone is stuck at the lg logo when i try to boot, when i try to go to download mode it shows the blue dots but windows, flash tool, nothing will recognize the phone as being plugged in, and not even the little sound windows makes when a usb device is plugged in, its been a little while so i cant remember EXACTLY what the last thing i did that bricked it was, something i did on command line with aboot something, i can try to dig it up if absolutely necessary but it would take some digging...when i try to boot into recovery it freezes at the "loading recovery screen, when i try to go to download mode it sticks at the blue dots and wont respond to anything, when i try to do a factory hard data reset it says "hard reset processing" or something similar then freezes there, ive tried reinstalling the drivers, using different pcs, read through countless threads, but have had no luck, any ideas what i can do to unbrick my brand new g2?? thanks in advance
Click to expand...
Click to collapse
This is what i would do....looks like your cable works, looks like you know how to get into Download and Recovery Mode. You have to get it to be detected, if it boots into Download mode it should work. Try re-installing the drivers.
Here is the ZVC tot file if u dont have it: http://forum.xda-developers.com/showthread.php?t=2702422
Try this Tutorial: http://forum.xda-developers.com/showthread.php?t=2475045
pvinodnayak said:
Change PC and try
Sent from my XT1022 using Tapatalk
Click to expand...
Click to collapse
tried 3 different computers and windows 7 and 8....
youngnex said:
This is what i would do....looks like your cable works, looks like you know how to get into Download and Recovery Mode. You have to get it to be detected, if it boots into Download mode it should work. Try re-installing the drivers.
Here is the ZVC tot file if u dont have it: http://forum.xda-developers.com/showthread.php?t=2702422
Try this Tutorial: http://forum.xda-developers.com/showthread.php?t=2475045
Click to expand...
Click to collapse
that tutorial still leaves me stuck at trying to get the computer to recognize it and so far no luck! thanks for the info ill do that if i do gett it to recognize it...any other ideas?? im stuck!
xbabyboy4021x said:
tried 3 different computers and windows 7 and 8....
that tutorial still leaves me stuck at trying to get the computer to recognize it and so far no luck! thanks for the info ill do that if i do gett it to recognize it...any other ideas?? im stuck!
Click to expand...
Click to collapse
Your download mode is broken. The laf partition needs fixed.
I'm looking for a way to do it from recovery.
Sent from my Nexus 7 using Tapatalk
unless you can get into fastboot mode, your sol. I had this exact same thing happen to me, ended up having to get a replacement phone.
i fixed it! ...by taking it to sprint and getting a manufacturer warranty replacement lol...got tired of effin with it
Well that sucks. I have the same problem and I just need to get back into download mode. Is there a key combo for DL mode?
Sent from my SM-T217S
Bigt2003 said:
Well that sucks. I have the same problem and I just need to get back into download mode. Is there a key combo for DL mode?
Sent from my SM-T217S
Click to expand...
Click to collapse
with the phone off (completely), hold volume button (up i believe), and plug usb into computer. This should bring up download mode. If volume up doesnt work, try volume down. If you get just to the dots, then your download mode is broken.
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you
i installed cm14.1 today from the cyanogenmod website i had everything running fine until i reboot into recovery. i got a black screen and it didnt bot into recovery at all so i held my power button and volume down and nothing happens. i cant even boot up into fast boot or anything. nothing is turning my phone on. when i connect it to my pc nothing happens. is there anything i can do?
There's a mega unbrick guide for the OnePlus 3, use that then install the correct firmware and install the custom TWRP and re flash the ROM
i tried that method but the device doesnt even show up on my pc
envious86 said:
i tried that method but the device doesnt even show up on my pc
Click to expand...
Click to collapse
Get this sorted yet? You'll need a modified TWRP recovery for the newest CM based builds. I went through the same thing yesterday or the day before. Try holding volume down and power for like 30 seconds until you feel it vibrate that it is rebooting. Then hold volume *UP* while it reboots or if you see the "your device is not safe..." flash screen hurry and press volume down and go into fastboot. From there you can fastboot flash a new recovery.
I had the same problem as well, in device manager go to ports (com & LPT) and it will show up there under qualcum device. Don't forget to go and turn off certificate verification
Thanks guys I'll try this after work. Hopefully it works. If not sure oneplus are hopefully releasing a new phone soon
No it didn't work. I have a feeling I deleted something I shouldn't have because I was clearing out my files before I restarted and that was that.
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Just use the recovery rahditzz provided you with a link, if your phone is stuck on black screen with white led hold your power button until it turns off, then boot to fastboot and flash the recovery and you will boot...
rahditzz said:
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Click to expand...
Click to collapse
thanks didnt work. when i fastboot flash recovery and boot again it just goes into a black screen again
Then use unbrick method 2..
rahditzz said:
Then use unbrick method 2..
Click to expand...
Click to collapse
neither method works. all i can do is get into fastboot mode thats it. it wont show up on my pc at all
Method 2 workshop 100%, unless its a hardware fault..
Are you pushing volume up while plugging in cable?
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
I jeep getting the sahara communication failed error
envious86 said:
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
Click to expand...
Click to collapse
Your running vista???? Good god update your OS!!
Maybe your fastboot drivers got updated? There were some reports around this. You could try reinstalling the drivers and following the unbrick guide without an internet connection.
Sent from my ONEPLUS A3003 using Tapatalk
Cool u can boot into Fastboot, what error do you get when you type Fastboot devices? Nothing shows up?