Related
Hello! I've read that LG Panther have an update which supports copy/paste, but zune writes me that my phone is up to date (my current build is 7003). I've tried to change a region and tried to sign in using different accounts, but that was hopeless... Any opinion?
proplayer666 said:
Hello! I've read that LG Panther have an update which supports copy/paste, but zune writes me that my phone is up to date (my current build is 7003). I've tried to change a region and tried to sign in using different accounts, but that was hopeless... Any opinion?
Click to expand...
Click to collapse
I've heard the same thing, and as far as I know, it's not going out via Zune (I've not got it, or seen it on either a Taylor or a Panther). I think we'll just have to wait...
Same here. My zune and phone both don't detect updates.
fb401 said:
Same here. My zune and phone both don't detect updates.
Click to expand...
Click to collapse
I think regularly checking the Connect site might be the best option for finding new builds.
l3v5y said:
I think regularly checking the Connect site might be the best option for finding new builds.
Click to expand...
Click to collapse
Microsoft Connect? I've tried to search there and failed...
proplayer666 said:
Microsoft Connect? I've tried to search there and failed...
Click to expand...
Click to collapse
The update isn't there yet, but I suspect it'll go there before anywhere else.
i've searched in google about this and understood that zune must flash this update, but it haven't caused. I think a special version of zune exists (not 4.7).
proplayer666 said:
i've searched in google about this and understood that zune must flash this update, but it haven't caused. I think a special version of zune exists (not 4.7).
Click to expand...
Click to collapse
I very much doubt you'll find an update, and I'm even more sceptical that it'll be on Zune. 4.7 is the latest version I know of, there might be some linking to Live IDs, or maybe only some devices/LiveIDs get the update.
Hello All,
I just wanted to chime in and say that I also have a GW910 and it also claims to be 100% up-to-date on version 7.0.7003.0
I just wondered if you lot all think that we will even get the update in 2011 at all.
Also... do any of you know what will happen regarding firmware updates (radio etc)?
I ask because I have a problem here in Luxembourg where my phone loses connection to HTTPS sites after a while. It can still connect to the internet but to anything related to HTTPS (SSL etc).
I know that it isn't a fault with the phone itself (Hardware) because it only happens when I am travelling around and my phone has to change between 3G and Edge quite often. It I stay at home, there is no problem at all.
Comments anyone??
nebc100 said:
Hello All,
I just wanted to chime in and say that I also have a GW910 and it also claims to be 100% up-to-date on version 7.0.7003.0
I just wondered if you lot all think that we will even get the update in 2011 at all.
Also... do any of you know what will happen regarding firmware updates (radio etc)?
I ask because I have a problem here in Luxembourg where my phone loses connection to HTTPS sites after a while. It can still connect to the internet but to anything related to HTTPS (SSL etc).
I know that it isn't a fault with the phone itself (Hardware) because it only happens when I am travelling around and my phone has to change between 3G and Edge quite often. It I stay at home, there is no problem at all.
Comments anyone??
Click to expand...
Click to collapse
I think we probably will get an update, there's not much point having developer hardware if we're developing on software that's out of date.
Radio updates etc I'm less sure about, my Taylor says the radio is from August, though the OS is much more recent.
That sounds like an issue with the general OS, and it may be being patched anyway, I'd see if you can submit that as a bug (via Connect) or via the on device feedback mechanism (can't remember how to access it, but I remember it being there).
According to this thread http://forums.create.msdn.com/forums/t/77100.aspx, no dev phones will be updated.
fb401 said:
According to this thread http://forums.create.msdn.com/forums/t/77100.aspx, no dev phones will be updated.
Click to expand...
Click to collapse
and what about mango? also no update?
screamer333 said:
and what about mango? also no update?
Click to expand...
Click to collapse
You need NoDo in order to get Mango, so no. I still have my Panther, I'm just waiting on the next batch of hardware this fall so I can change over.
I found a copy of the ChevronWP7.Updater and was able to update my pre-release LG GW910 build 7004 to NoDo. After I did that I was able to install Mango beta 2.
cmcginnis said:
I found a copy of the ChevronWP7.Updater and was able to update my pre-release LG GW910 build 7004 to NoDo. After I did that I was able to install Mango beta 2.
Click to expand...
Click to collapse
How did you get to 7004, I can read on my phone that I am on 7003.
cedtat said:
How did you get to 7004, I can read on my phone that I am on 7003.
Click to expand...
Click to collapse
Here is how I was able to get Mango installed on my pre-release developer phone (LG GW910).
NOTE: These directions are slightly modified to work as if you were starting from build 7004 (maybe 7003). After I the Chevron update I to install Mango beta 2 but received a 80180048 error. I used the backup that was created to get it back to the state just prior to the Mango update process.
The steps I took starting out with build 7004.
Run the ChevronWP7.Update twice to bring the phone up to build 7390 (NoDo)
Use the "Walshed" Phone support tool to put the device in a state where it can receive official updates - http://blog.walshie.me/walshed-phone-support-tool-official-fix-to-get-you-back-on-track
Be sure to follow the instructions and select ALL of the languages the keyboard supports.
Then following the Mango beta 2 installation instructions.
Mango beta 2 should install without any issues.
IMPORTANT: Uninstalling the Zune software will DELETE your backup. I created a RAR archive of the backup but kept it in the same folder and everything was wiped out.
cmcginnis said:
Here is how I was able to get Mango installed on my pre-release developer phone (LG GW910).
NOTE: These directions are slightly modified to work as if you were starting from build 7004 (maybe 7003). After I the Chevron update I to install Mango beta 2 but received a 80180048 error. I used the backup that was created to get it back to the state just prior to the Mango update process.
The steps I took starting out with build 7004.
Run the ChevronWP7.Update twice to bring the phone up to build 7390 (NoDo)
Use the "Walshed" Phone support tool to put the device in a state where it can receive official updates - http://blog.walshie.me/walshed-phone-support-tool-official-fix-to-get-you-back-on-track
Be sure to follow the instructions and select ALL of the languages the keyboard supports.
Then following the Mango beta 2 installation instructions.
Mango beta 2 should install without any issues.
IMPORTANT: Uninstalling the Zune software will DELETE your backup. I created a RAR archive of the backup but kept it in the same folder and everything was wiped out.
Click to expand...
Click to collapse
Hello,
I have tried what you say, but sadly the ChevronWP7.unlocker doesn't seem to work.
I get the Black screen where is asks what language, and whatever I select the screen simply closes.
What OS did you use? Was it a 64bit OS or 32bit OS?
I want to try it again, but at the moment I am stuck.
Thanks
nebc100
P.S. would you be willing to send me a copy of the ChevronWP7.unlocker that you used?
If so PM me, and I will send you my e-mail address.
nebc100 said:
Hello,
I have tried what you say, but sadly the ChevronWP7.unlocker doesn't seem to work.
I get the Black screen where is asks what language, and whatever I select the screen simply closes.
What OS did you use? Was it a 64bit OS or 32bit OS?
I want to try it again, but at the moment I am stuck.
Thanks
nebc100
P.S. would you be willing to send me a copy of the ChevronWP7.unlocker that you used?
If so PM me, and I will send you my e-mail address.
Click to expand...
Click to collapse
If you have tried it, disconnect your phone, reboot it, then connect it and wait for Windows to tell you the device has been correctly installed (if that hasn't happened yet). Then try ChevronWP7.Update again.
I used the 64-bit version. I'll find and post the link I used to download the app.
cmcginnis said:
If you have tried it, disconnect your phone, reboot it, then connect it and wait for Windows to tell you the device has been correctly installed (if that hasn't happened yet). Then try ChevronWP7.Update again.
I used the 64-bit version. I'll find and post the link I used to download the app.
Click to expand...
Click to collapse
There seems to be a misunderstanding in your communication. It seems as if you had a Panther that already HAD 7004 loaded on to it, which allowed you to updated all the way to post-Nodo.
There is currently no way possible for the Chevron Updater to bring a 7003 Panther up to 7004. Useless Guy even opened up the source code and tried to force the program into update his device and it did not work.
fb401 said:
There seems to be a misunderstanding in your communication. It seems as if you had a Panther that already HAD 7004 loaded on to it, which allowed you to updated all the way to post-Nodo.
There is currently no way possible for the Chevron Updater to bring a 7003 Panther up to 7004. Useless Guy even opened up the source code and tried to force the program into update his device and it did not work.
Click to expand...
Click to collapse
I am sorry if I did not communicate that correctly. Yes, I started with a Panther which already had build 7004 on it.
Simply follow the instructions included with the PDF, but instead of running MangoB2-DevRetailUpdate.exe, run this file.
Everything else is exactly the same. No need to run MangoB2-DevRetailUpdate.exe aftewards.
No dev unlock required, no Zune check, no WP Dev SDK check.
Thanks to ne0cr0n for the idea!
http://www.mediafire.com/?r3o8r3hmvd79nd5
Tried and tested on my own phone. Works 100%
Good job , Thanks update now done 5 differences WP7 devices working well
AlexDP said:
Simply follow the instructions included with the PDF, but instead of running MangoB2-DevRetailUpdate.exe, run this file.
Everything else is exactly the same. No need to run MangoB2-DevRetailUpdate.exe aftewards.
No dev unlock required, no Zune check, no WP Dev SDK check.
Thanks to ne0cr0n for the idea!
http://www.mediafire.com/?r3o8r3hmvd79nd5
Tried and tested on my own phone. Works 100%
Click to expand...
Click to collapse
Error "Updatewp.exe is not found" there
Tom
tom_codon said:
Error "Updatewp.exe is not found" there
Tom
Click to expand...
Click to collapse
You still have to follow the rest of the steps. One of the steps is to run the appropriate version of MangoB2-UpdateWP-....exe! That puts the UpdateWP.exe file in the right location (Zune folder in Program Files)
AlexDP said:
You still have to follow the rest of the steps. One of the steps is to run the appropriate version of MangoB2-UpdateWP-....exe! That puts the UpdateWP.exe file in the right location (Zune folder in Program Files)
Click to expand...
Click to collapse
ok , i got it , thanks you !
Tom
AlexDP said:
Simply follow the instructions included with the PDF, but instead of running MangoB2-DevRetailUpdate.exe, run this file.
Everything else is exactly the same. No need to run MangoB2-DevRetailUpdate.exe aftewards.
No dev unlock required, no Zune check, no WP Dev SDK check.
Thanks to ne0cr0n for the idea!
http://www.mediafire.com/?r3o8r3hmvd79nd5
Tried and tested on my own phone. Works 100%
Click to expand...
Click to collapse
I got the Mango Beta update invitation and I downloaded it and installed it the thing is my account is not fully activated so I can not unlock it officially. When I updated the device to the Mango Beta I lost my Chevron unlock... So its kind of problem... You will not be able to sideload apps with out a fully activated dev account... I know that Chevron labs is coming out soon but we shouldnt have to pay for something like this... Does anyone know what I/everyone else can do so we can sideload apps without having to use the official MS way or the Chevron labs way?
It works!
FIrst it install build 7401 and then upgrade to 7661.
AlexDP said:
Simply follow the instructions included with the PDF, but instead of running MangoB2-DevRetailUpdate.exe, run this file.
Everything else is exactly the same. No need to run MangoB2-DevRetailUpdate.exe aftewards.
No dev unlock required, no Zune check, no WP Dev SDK check.
Thanks to ne0cr0n for the idea!
http://www.mediafire.com/?r3o8r3hmvd79nd5
Tried and tested on my own phone. Works 100%
Click to expand...
Click to collapse
One warning I will say, make sure you SAVE the backup it makes, there is no upgrade path from Beta Mango to RTM. You need to revert to the backup before an upgrade path to Mango RTM.
walshieau said:
One warning I will say, make sure you SAVE the backup it makes, there is no upgrade path from Beta Mango to RTM. You need to revert to the backup before an upgrade path to Mango RTM.
Click to expand...
Click to collapse
I suspect we're going to see a lot of kids crying, because they didn't read the documentation.
Mhhh,
I just played to get the Betaupdate. I think infact of the chevronwp7 I got an error while updating to Mango.
Anybody else in this club?
Regards
Frank
OP, what PDF are you talking about? There's only 1 file in the "provision.zip" zip file.
Nevermind...
xs2k said:
OP, what PDF are you talking about? There's only 1 file in the "provision.zip" zip file.
Click to expand...
Click to collapse
i think he is talking about the pdf contained in the downloadpackage for developers.
there are 4 parts
update documentation
zune prerelease
zune update
and the MangoB2-DevRetailUpdate.exe
you have to install the zune client and update. afterwards you can use the cracked MangoB2-DevRetailUpdate.exe to bring mango on your phone.
ne0cr0n said:
i think he is talking about the pdf contained in the downloadpackage for developers.
there are 4 parts
update documentation
zune prerelease
zune update
and the MangoB2-DevRetailUpdate.exe
you have to install the zune client and update. afterwards you can use the cracked MangoB2-DevRetailUpdate.exe to bring mango on your phone.
Click to expand...
Click to collapse
Nevermind...everything worked...just took a bit of time to reboot.
Is this working With Dell Venue Pro with Nodo original not Chevron done ?
I got the ISV Beta (7401),but i cant install mango on my device.It says cant find update and some error code.And i click on that code and it takes me here
http://www.microsoft.com/windowspho...ndows-phone-update.aspx?ec=0x80072eff&osv=7.0
ive updatet my trophy
you must update 2 times one time to 7441 and the to 7661 version
it takes abou 1 houer to update
registry editor and advanced config dont work it comes an message "dieses programm wurde von microsoft wiederufen, deinstallieren sie es" ~ "this app was blocked from microsoft pleas uninstall it"
very bad also the 16bit bug is back no 32bit for me
I am updating NOW
it worked flawlessly... thanks
UPDATE:
I figured I would clear up somethings from my post last night. Originally I had rolled all the way back to pre-nodo to unlock and was really over doing everything.
After unlocking mango on my phone that way I decided to try my girls hd7 by just adding custclear.provxml to the windows directory on nodo while unlocked.
So here the updated step by step. So far its only working on HTC devices.
1. Make sure that you have nodo unlocked and download the latest HTC Connection setup from the MARKETPLACE.
2. Place the CustClear.provxml from this post in the windows directory on the phone. There is a number of ways to do this. I used Windows Phone Device Manager but you could also use the Chevron Ringtone App to get it to the phone and TouchXplorer to move to the windows directory. Or Remote Suite, etc. Included in the provxml is developer unlock, max apps, and prevent relock.
3. Update to mango.
4. As soon as mango starts run HTC Connection setup. And your unlocked.
Ive had mine unlocked since last night and hasnt relocked itself. Ive synced with zune several times, Sideloaded over 10 xaps and everything is going great.
So thats the short version of it. Had a good feeling it would work without going all the way back to pre-nodo. So if youve already upgraded to mango you can just restore your unlocked nodo and restart.
Im glad I got to help out the community. Im in no way a genius when it comes to this stuff though I wouldnt say Im in the dark. Just put the old regedit trick to work.
If I helped you please hit the Thanks button.
How about the sideload apps and xbox games(illegal)? do they work?
thekiller99 said:
How about the sideload apps and xbox games(illegal)? do they work?
Click to expand...
Click to collapse
Currently sideloading them right now. All work so far except advanced config. But that has to do with mango itself.
Ive connected to zune multiple times to sync music...Only thing Im doing a little different is instead of zune I use wpconnect to sideload app.. its just quicker.
Still unlocked... Im over 10 xaps already so Im pretty sure the limit also stuck.
Other than known problems with any app that accesses parts of the file system on mango...I dont remember the specifics but touchxplorer probably wont work either though I havent sideloaded that one yet to confirm.
So far its holding.
EDIT: TouchXplorer does work. But TouchXperience does not. So no WPDM.
reeg420 said:
I just tested this on my hd7 and worked flawlessly.
Then I uninstalled TouchExplorer from the phone. Just to make sure there wasnt any sideloaded apps on there before I updated to mango.
.
Click to expand...
Click to collapse
Have u also uninstalled the prevent relock xap?
startewho said:
Have u also uninstalled the prevent relock xap?
Click to expand...
Click to collapse
Actually yah. Didnt even think about that since I always just uninstall that after I use it. Uninstalled it on pre-nodo if it matters.
Only thing I had on the phone when I upgraded to mango was all the basic stuff that comes with the phone originally and HTC connection setup downloaded from the market while on nodo..thats it.
Alright, im gonna give it a try and see if works
Now i gotta wait 2 hours again for the update
jamesris1 said:
Alright, im gonna give it a try and see if works
Now i gotta wait 2 hours again for the update
Click to expand...
Click to collapse
Waiting for ur confirmation
jamesris1 said:
Alright, im gonna give it a try and see if works
Now i gotta wait 2 hours again for the update
Click to expand...
Click to collapse
I did it a total of 3 times. Second time like an idiot I forgot to apply the prevent relock after I installed it.
Probably dont have to go all the way back to pre-nodo if you havent installed mango yet and have it unlocked already or if you wanna just do a restore through zune. Pretty sure youd just have to make sure the the custclear.provxml is in the windows folder before you update to mango. Im gonna give this a shot with my girls phone when I get some more time..
So far no problems at all. Only app I installed that didnt work was advanced config and TouchXperience.
Now I try, do not know can not succeed
Thanks I Unlocked my HD7
sunsht said:
Thanks I Unlocked my HD7
Click to expand...
Click to collapse
Awesome was waiting for a confirmation. Did you have to go all the way back to pre-nodo or did you try with nodo unlocked?
Most of what I did probably was unnecessary but I wanted to be thorough so I didnt have to do it again. Most likely can have sideloaded apps on the phone when updated to mango just wont run until you run HTC connection setup with that custclear.provxml
reeg420 said:
I just tested this on my hd7 and worked flawlessly.
I did the normal pre-nodo chevron unlock.
Install the prevent relock xap. After running uninstall it.
Updated to nodo via zune.
Then I installed HTC Connection Setup from the marketplace..(dont sideload it).
Ran it once.
Then I made a custclear.provxml with developer unlock, max unsigned app, and prevent relock. I set the attributes to read only on my PC. Then copied that to the windows folder via Windows Phone Device Manager.
Then I uninstalled TouchExplorer from the phone. Just to make sure there wasnt any sideloaded apps on there before I updated to mango.
Updated to mango by the bat files from windowsphonehacker blog.
Then I ran connection setup and voila unlocked.
I attached the file I made to help people out.
Im gonna redo this post just wanted to get it out there.
Click to expand...
Click to collapse
Im glad there are another two Chinese friends have unlocked their HTC phone successfully.
I was wondering is there any similarities between HTC connection and Samsung tools we can make full use of to unlock my Omnia 7.
patpat for you
Do I need to delete some apps like htchub?
reeg420 said:
Currently sideloading them right now. All work so far except advanced config. But that has to do with mango itself.
Ive connected to zune multiple times to sync music...Only thing Im doing a little different is instead of zune I use wpconnect to sideload app.. its just quicker.
Still unlocked... Im over 10 xaps already so Im pretty sure the limit also stuck.
Other than known problems with any app that accesses parts of the file system on mango...I dont remember the specifics but touchxplorer probably wont work either though I havent sideloaded that one yet to confirm.
So far its holding.
EDIT: TouchXplorer does work. But TouchXperience does not. So no WPDM.
Click to expand...
Click to collapse
What about blackmarket xbox games? can you sideload and play them?
thekiller99 said:
What about blackmarket xbox games? can you sideload and play them?
Click to expand...
Click to collapse
Discussion of "WARES" is NOT allowed on XDA. This means any app/game/etc that costs money to buy, but some have figured out how to get for free. You risk the ban hammer by talking about wares.
I am from 7661 back to nodo, then according to your method is successful, when Nodo has escaped from prison
（My English is not good, hope you can understand what I mean）
sunsht said:
I am from 7661 back to nodo, then according to your method is successful, when Nodo has escaped from prison
（My English is not good, hope you can understand what I mean）
Click to expand...
Click to collapse
Yup im assuming as long as the custclear.provxml file is in the windows directory while on nodo.. And HTC connection setup has been downloaded from the market also on nodo then after you upgrade to mango that file will be right where HTC connection setup will read it.
Im testing this way right now on my girls hd7. I'll report back.
Sent from my HD7 using XDA Windows Phone 7 App
Hi,
is there any solution like this for my Samsung Omnia 7?
Sounds good so far
I use the backup to back my locked Mango to NoDo.and then,acrroding your method ,i have also unlocked my Htc Mozart from NoDo to Mango.
Thanks.
Can confirm that you can just put the provxml file in the windows folder on an unlocked nodo with sideloaded apps etc... Make sure connection setup is downloaded from the market and upgrade to mango. Then run connection setup first. Then all the sideloaded apps work fine. Didnt uninstall anything.
Hey Guy's
I would like to upgrade my phone on mango! But in the Market Place there is no HTC Connection setup. Or where can I get the app?
what u mean>>
What does the Connection Setup have to do with upgrading to Mango?
I would like to update mango but with jailbreak!
I've read that you need the htc connection setup to keep the jailbreak on mango!
I have the HTC 7 Pro Version 7008 with jailbreak and I want to update it on Mango with Jailbreak but it doesent work
PS: Sorry for my english
HTC Connection setup is missing from marketplace.
U want one click at dot.
Interesting that it's not available anymore. I just checked on my HTC and on 3MktPlace. Nowhere to be found. Im sure someone has the xap somewhere though
Thats the problem it is no longer in the market place.
Does someone has the xap file?
I've read that if you install the connection setup via xap and then update on mango that the connection setup uninstalled and the jailbreak is gone
i upload it(at http://forum.xda-developers.com/showpost.php?p=18109793&postcount=5) but if u update to mango phone will relock and u can't use that HTC Connection Setup
Thanks i'll test it and report then.
Sorry but if i click on the Link there is no xap
thecrazykaktus said:
Thats the problem it is no longer in the market place.
Does someone has the xap file?
I've read that if you install the connection setup via xap and then update on mango that the connection setup uninstalled and the jailbreak is gone
Click to expand...
Click to collapse
I am pretty sure that revoking of Connection Setup from marketplace has nothing to do with jailbreaking.
There is possible problem with some versions of ConnectionSetup after update to 7720.
On my phone, after update to 7720, only ConnectionSetup 1.2 2020.30266 works fine.
With ConnectionSetup 1.5 2022.40273 when I click on checkmark I receive message I mentioned "SIM card of .... carrier detected. To apply correct settings, we need to restart you phone. Do you want to restart now?" and can not do anything.
I tested both on same rom.
I think that 1.5 was latest version that was on marketplace until official Mango roll up.
folks, check here. I uploaded the latest version for him here.
the HTCAppManifest.xml says this:
<App Title="HTC_Connection_Setup" Version="1.11">
it's from the latest HTC OEM package. The files in the package are hidden when you unpack them Make sure you have see hidden files and operating files checked in explorer.
You can use Resumable XAP to deploy.
derausgewanderte said:
folks, check here. I uploaded the latest version for him here.
the HTCAppManifest.xml says this:
<App Title="HTC_Connection_Setup" Version="1.11">
it's from the latest HTC OEM package. The files in the package are hidden when you unpack them Make sure you have see hidden files and operating files checked in explorer.
You can use Resumable XAP to deploy.
Click to expand...
Click to collapse
I tried to load this on Mango Final 7720.68 Dev Unlock and it would not load (says it is unsigned?). Do you need interop-unlock?
LiFePo4 said:
I tried to load this on Mango Final 7720.68 Dev Unlock and it would not load (says it is unsigned?). Do you need interop-unlock?
Click to expand...
Click to collapse
yes, to sideload a clean dev unlock will not work. you need interop-unlock, sorry.
derausgewanderte said:
yes, to sideload a clean dev unlock will not work. you need interop-unlock, sorry.
Click to expand...
Click to collapse
Ah, then I shall wait and hope HTC releases it again on the marketplace. As a side question, if you roll back to NoDo to go into the interop-unlock sequence, will this version of Connection Setup run on NoDo?
I see many people with successful interop-unlock to final Mango upgrades were coming from the Mango OEM RTM (which appears to have this version of Connection Setup). If one were just on NoDo and follow the various procedures in these forums to get interop-unlock, exactly what version of Connection Setup do you use at each step?
Those of us on NoDo only have/had the 1.5 version that was on the marketplace and trying these upgrade paths fail since this version does not work on Mango. We did not do the custom upgrade to the OEM RTM that was leaked on here.
LiFePo4 said:
Ah, then I shall wait and hope HTC releases it again on the marketplace. As a side question, if you roll back to NoDo to go into the interop-unlock sequence, will this version of Connection Setup run on NoDo?
I see many people with successful interop-unlock to final Mango upgrades were coming from the Mango OEM RTM (which appears to have this version of Connection Setup). If one were just on NoDo and follow the various procedures in these forums to get interop-unlock, exactly what version of Connection Setup do you use at each step?
Those of us on NoDo only have/had the 1.5 version that was on the marketplace and trying these upgrade paths fail since this version does not work on Mango. We did not do the custom upgrade to the OEM RTM that was leaked on here.
Click to expand...
Click to collapse
I am not an HTC expert, but I would think that the 1.5 version should work.
derausgewanderte said:
I am not an HTC expert, but I would think that the 1.5 version should work.
Click to expand...
Click to collapse
I don't think anyone's sideloaded Xap file of connection setup will work on updating phone to Mango.
In the sequence of tricks to update Mango keeping dev unlock, people should deploy custerclear.provxml then update then activate connection setup(this app must be installed from the marketplace or coming along with original ROM of the device) then you can use other sideloaded apps after this activation.
If Connection setup is a sideloaded one, it will be revoked. INTEROP-LOCK now is still a pain for HTC phones as there is still no way to interop-unlock HTC devices.
Another choice is run RPSL/HSPL with older version of SPL then flash custom ROM.
blacksuitboy said:
I don't think anyone's sideloaded Xap file of connection setup will work on updating phone to Mango.
In the sequence of tricks to update Mango keeping dev unlock, people should deploy custerclear.provxml then update then activate connection setup(this app must be installed from the marketplace or coming along with original ROM of the device) then you can use other sideloaded apps after this activation.
If Connection setup is a sideloaded one, it will be revoked. INTEROP-LOCK now is still a pain for HTC phones as there is still no way to interop-unlock HTC devices.
Another choice is run RPSL/HSPL with older version of SPL then flash custom ROM.
Click to expand...
Click to collapse
I am in total agreement. I have given up for now until someone figures how to interop-unlock HTC Mango directly or HTC releases a new Connection Setup that runs directly from Mango final without having it from the original ROM.
LiFePo4 said:
I am in total agreement. I have given up for now until someone figures how to interop-unlock HTC Mango directly or HTC releases a new Connection Setup that runs directly from Mango final without having it from the original ROM.
Click to expand...
Click to collapse
Do you have Verizon Trophy (aka SparkW) or original Trophy (aka Spark)?
If you just need unlocked rom for normal Trophy you have already unlocked mango roms:
http://forum.xda-developers.com/showthread.php?t=1270505
http://forum.xda-developers.com/showthread.php?t=1274808
derausgewanderte said:
folks, check here. I uploaded the latest version for him here.
the HTCAppManifest.xml says this:
<App Title="HTC_Connection_Setup" Version="1.11">
it's from the latest HTC OEM package. The files in the package are hidden when you unpack them Make sure you have see hidden files and operating files checked in explorer.
You can use Resumable XAP to deploy.
Click to expand...
Click to collapse
That version doesn't work fine for me on Mango. I tried 1.10, 1.11, 1.5, 1.9... No luck.
I attached the only version that works fine on my phone, and that is 1.2.
I extracted it from latest HTC update for Spark.
Unfortunately HTCAppManifest.xml is broken, so it can not be deployed with all known deployers.
Fortunately it can be deployed with Resumable XAP
viking13 said:
Do you have Verizon Trophy (aka SparkW) or original Trophy (aka Spark)?
If you just need unlocked rom for normal Trophy you have already unlocked mango roms:
http://forum.xda-developers.com/showthread.php?t=1270505
http://forum.xda-developers.com/showthread.php?t=1274808
Click to expand...
Click to collapse
Unfortunately I have the Verizon Trophy, so seem to be the worst case scenario for getting interop-unlocked Mango out of all WP7 devices.
Good morning, today updated my cell 930 to the 14356 version and did a reset after the update, I enabled the developer and tried to install vcreg xap 1.5 at xapdeployer but is carrying and says the device did not respond to the program , did another reset and the same error happened , I think from that build they blocked this form of release , I leave here my warning , if resetting, already know that will only be able to unlock the Interop Tools app .
Edit: Good morning, about the error installing vcreg out, what I found this happening, is the bug build the @nawzil confirmed, is attached the print!
Which version of the SDK Deploy tool are you using? Some XAPs will only install using the older version, 8.0, while other XAPs and APPXs will only install using version 8.1. Try both of them if you haven't already. Also, install Root Tool 2.0 first and interop unlock the device.
x_orange90_x said:
Which version of the SDK Deploy tool are you using? Some XAPs will only install using the older version, 8.0, while other XAPs and APPXs will only install using version 8.1. Try both of them if you haven't already. Also, install Root Tool 2.0 first and interop unlock the device.
Click to expand...
Click to collapse
I used Xap Deployer 2.0.7
Install the SDKs and try with the Deployment tools in them. You may need to run the Developer Registration tool for each one first and login before it will let you deploy.
Windows Phone 8 SDK Lite -
http://itechgreet.blogspot.com/2015/05/install-windows-phone-80-sdk-lite-on.html?m=1
Windows Phone 8.1 SDK Lite -
http://www.windowscommunity.in/download-windows-phone-8-1-sdk-lite/
error
x_orange90_x said:
Install the SDKs and try with the Deployment tools in them. You may need to run the Developer Registration tool for each one first and login before it will let you deploy.
Windows Phone 8 SDK Lite -
http://itechgreet.blogspot.com/2015/05/install-windows-phone-80-sdk-lite-on.html?m=1
Windows Phone 8.1 SDK Lite -
http://www.windowscommunity.in/download-windows-phone-8-1-sdk-lite/
Click to expand...
Click to collapse
look this error....
Are you making sure the screen is not locked before clicking Deploy?
x_orange90_x said:
Are you making sure the screen is not locked before clicking Deploy?
Click to expand...
Click to collapse
yes
rickk182440 said:
yes
Click to expand...
Click to collapse
For deploying vcreg1.5 try WPPowerTools
Same error too, tried with both official tools and Power Tools.
I even unregistered and registered the phone again with Windows Phone Developer Registration Tool, still I get the very same error.
Gh0s7_Dj said:
Same error too, tried with both official tools and Power Tools.
I even unregistered and registered the phone again with Windows Phone Developer Registration Tool, still I get the very same error.
Click to expand...
Click to collapse
Bad news...trying everything...deploying vcregs not working on latest RS after hard reset....((
Well, i too do the reset, and deploying app using the Application Deployment will not work, and you will face this issue on both SDK 8 and 8.1. Seem like they block it on this build.
Maybe need to go back to TH build and install the app.
s0rata said:
Well, i too do the reset, and deploying app using the Application Deployment will not work, and you will face this issue on both SDK 8 and 8.1. Seem like they block it on this build.
Maybe need to go back to TH build and install the app.
Click to expand...
Click to collapse
make sure that you are having the IPOverUSBSvc running in Task Manager -> Services tab .
Also I suggest you to use this app for deploy : Windows Phone Power Tools
wptools.codeplex.com
Why do you guys keep on saying to use WPPowerTools?
I already said it doesn't work, and it doesn't work even using XapDeployCmd.
IPOverUsbSvc is not related, as I was able to deploy BEFORE moving to the insider build.
Btw rolled back to TH2 and I was able to deploy it without issues.
Gh0s7_Dj said:
Why do you guys keep on saying to use WPPowerTools?
I already said it doesn't work, and it doesn't work even using XapDeployCmd.
IPOverUsbSvc is not related, as I was able to deploy BEFORE moving to the insider build.
Btw rolled back to TH2 and I was able to deploy it without issues.
Click to expand...
Click to collapse
Second try, without success...on other phones with RS 14342 and th2 10586 .338 everything works ok, hard resets ok. Trying all phones on 1 notebook .... After hard reset new RS 14356 can´t deploy anything...(( (IPOverUsbSvc enabled, using WPPowerTools and others..)
kukmikuk said:
Second try, without success...on other phones with RS 14342 and th2 10586 .338 everything works ok, hard resets ok. Trying all phones on 1 notebook .... After hard reset new RS 14356 can´t deploy anything...(( (IPOverUsbSvc enabled, using WPPowerTools and others..)
Click to expand...
Click to collapse
But on build 14295, it works fine. So maybe the later build cause this problem.
If we have the .appx version of the app, we can install it using file explorer on phone.
IN THIS BUILD, Bug found in the deploy
rickk182440 said:
IN THIS BUILD, Bug found in the deploy
Click to expand...
Click to collapse
Do you hard reset after EVERY new build update you install?
For me, can't deploy Xap, Appx or AppxBunble with my PC in this build.
x_orange90_x said:
Do you hard reset after EVERY new build update you install?
Click to expand...
Click to collapse
yeah
titi66200 said:
For me, can't deploy Xap, Appx or AppxBunble with my PC in this build.
Click to expand...
Click to collapse
I saw the same issue but on TH2 . try to unregister your device using WP Developer registration 8.1 then re-register it .
my problem solved using this way