Related
I can get into download mode, but odin doesn't recognize, the only other screen i get too sdays "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again, but Kies cant connect to it, am i screwed? Please help this all happened from changing my screen density, i cant find anyway too restore, i'm not a noob and am in desperate help, i'm gonna be soo bummed if i brick, but i have a feeling if i can get too download mode, there must be a way too restore it.
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
I flashed the newest version of Roman BB's AOKP CM9 Kang and tried to change the density, i went too restore my nandroid and it froze before it finished, I tried odin and the first 2 times it recognized but both froze before the end. im kinda couch surfing so now i'm incredibally screwed without a phone, please help.
badname said:
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Roman bb's most updated AOKP, i changed the screen density and when i went to reboot it bootlooped, so i tried restoring a nandroid wich failed, tryed again, and now i cant get too recovery, i can only get too download mode, so i tried using odin too go back too stock, it failed almost at the end, twice, now i cant get odin to recognize my phone and it wont turn on, the only thing i can do is get too download mode, and too the thing saying use kies recovery, which does nothing because it won't connect. I'm at a total lost, i'm so scared i lost my only source of income, at this point in my life, if i dont have a phone, i dont have work or food or a warm place too sleep. Please anyone with any ideas please help.
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
kobridge said:
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
Click to expand...
Click to collapse
I've never heard that one before. What do you think is unique about the stock micro-usb cable?
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
garwynn said:
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
Click to expand...
Click to collapse
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
simple
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
use a different cable and uninstall drivers and reinstall reboot computer also
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Yeah now that you mention it I realized my nook color micro usb cable has a longer metal end-piece than my E4GT, and won't connect properly. I thought the length of the metal prong would have also been standardized. Go figure.
TimidRat said:
I flashed CM9. i went too restore my nandroid.
Click to expand...
Click to collapse
This is the problem unless you flashed a gb kernel/recovery first. You should not do anything in ICS recovery.
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Its true not all cables are the same, but the funny part is from the beginning of OG Epic days we figured out quick the only thing you should do with the stock cable is charge... its garbage. Maybe the new model is better, havent tried it, but it looked pretty much the same, thin little thing... I use my 4 year old BBerry cable, about as thick as a cat-5... never had an issue. But yeah, try new drivers, cable, diff PC, use a USB that is physically part of the Motherboard of the PC (desktop)... all these things help with the shoddy drivers, etc... you may get lucky...
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
But you said you did attempt a restore through CWM after the bootloop, correct? If you did and you're having problems you *may* have bricked. Using ODIN is a surefire way to confirm whether you did or not. If you didn't attempt anything through CWM while having CM9 installed then you may not be bricked but are obviously still having issues. As it has been said before - and quite often - CWM at your own risk; ODIN is believed to be the safest option.
Regardless, if you're having problems and the USB cable doesn't fix it I'll still recommend trying to get back to a GB stock ROM by ODIN. At the worst you've lost what you have done since the last backup, since you can restore that from the backup once you get back to GB. With so many bricked phones lately it may be best to err on the side of caution this time...
I've tried everything mentioned, except a different pc, i tried linux, on my pc odin doesntr recognize my phone, , but i just went and plugged a flash fdrive in so now im thinking my computer is having usb problems, so im gonna try another computer, i also made a usb jig to reset the odin counter too take it too sprint but it didnt work... i'm so confused and screwed without my phone. Thank you everyone for trying too help. Any more ides are greatly appreciated! Thanks soo much guys!
ive had this problem before and basically my phone would turn on but no signal sd card didnt work wouldent read in computer but if you cant get it to work and have fifty bucks u can go to mobiletechvideos.com and it will take about mabe 3-4 days mine took a week since i sent on a friday but it costs fifty bucks and the only thing when i came back that wasnt working 100% was the picture gallery. true him if it comes down to it
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
blackroseMD1 said:
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
Click to expand...
Click to collapse
Yup that's what theyre doing for me, i'll get it tomorrow or tuesday, cant complain too much im gonna get one with no scratches.
Thank you everyone who replied, im set egtting my new one, im gonna try and swindle kepping the bricked one cause im sure it could be of major use too a dev....
Sprint Epic 4G Touch Appears Bricked
My Sprint Samsung Galaxy S II Epic 4G Touch will no longer connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
FACTORY MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
But connecting to my PC still fails. Any ideas?
Alright I am running cm9 and have been for weeks with no issues. I got the new galaxy s3 and installed the drivers on my pc to root it and all that. I want to change roms on my E4GT though so I go to plug it in and it charges but will not connect so I figured I had to reinstall the usb drivers for my e4gt so I did and still nothing. I am in no way a newb i have flashed tons of roms and I know I did not do anything wrong. I believe I am just missing a driver. Can someone point me in the right direction? I have the latest version of kies installed and the drivers straight from samsungs website.
Made a little progress but not much. I realized I didnt have usb debugging enabled so I enabled that but now when I plug it in it just says usb debugging enabled instead of asking if I want to mount as storage device I have tried rebooting phone and pc several times. I am running out of ideas.
Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe
Thank you very much i will give it a try and report back.
Sent from my SPH-D710 using XDA
Mattheyu said:
Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe
Click to expand...
Click to collapse
Actually no i did not get the drivers by installing kies because I already had it i got the sprint sph d710 usb drivers. Should I uninstall those and just install kies?
Well this is a rediculus problem that I am having now.. I cant install kies because it is saying I am not connected to the internet and I clearly am as I am posting this on the same pc that I am trying to install on.. I have tried rebooting the pc that does nothing.
Alright I got kies to install but still the same thing when I plug the phone in it says usb debugging enabled i really have no idea what is going on.
have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer
scud626 said:
have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer
Click to expand...
Click to collapse
I have tried different ports but not a different comp. Ya I am gonna flash a new rom and see if that helps. How could I have fried the usb board though? I havent touched the phone in days since I got the gs3.
Yup Just flashed the new Super Nova rom and now everything is working again, thank you very much for all the help and if anyone hasnt checked out that rom yet they need to its awesome!
Hello XDA!
I don't want to post a wall of text (not that tall of a wall, at least), so, I'll try to get to the point quickly. And yes, I have done a lot of searching, both on XDA and Google, and that will be proved soon enough with the solutions that I've tried so far.
The problem I'm currently experiencing is when I connect my phone to my computer, it charges but it isn't recognized. There is no USB notifications, no phone in My Computer, and no Windows pop up, whether it's a pop up asking me to install drivers or an unknown device has been connected, nothing. Mind you, everything has been working flawlessly, this just randomly, and I really do mean randomly, started happening. The phone has never been dropped and there is no water damage. I'm still using the USB cable that came with the phone. And, if it matters, I'm rooted, running the leaked LI8 JB ROM, stock kernel, and UVLEM baseband.
Here's a list of said solutions that I've tried so far:
Using a thin paint brush, wet the tip a little with alcohol and tried cleaning out the USB port
Connecting to a different computer, connecting with a different cable, connecting to any other USB ports on the computer
After making Nandroid backup: Data wipe/factory reset, flashing a different ROM
Remove Samsung USB drivers and reinstalling, also tried installing Samsung Kies
Uncheck USB debugging and restarting, checking USB debugging and restarting
Dialled *#7284#, select Modem, then reselect PDA, changing Qualcomm USB settings and changing it back to MTP + ADB
Turn off phone, remove battery for 30 sec, reinsert and boot up (soft reset to reset internal circuitry as described by a Samsung live chat service tech)
I might've left out a couple, but please do enlighten me of methods that you might know, I'll be sure to try it or let you know if it's already been attempted.
..also, when connected to my PC, under Settings > Battery, it shows "Charging (AC)" IIRC, this should be showing "Charging (USB)".
This next attempt stood out to me. I decided I would try and go back to the stock firmware, one where I would have to use Odin3. So, I put the phone in Download Mode, open up Odin3, connect the phone, and I get a pop up in Windows! It's trying to install drivers, and fails. I can't flash the stock Samsung firmware if I wanted to, even for warranty purposes. I do currently have the USB drivers installed, but my PC hasn't gone through the driver installation for when the phone is connected to the computer. So, I'm assuming that is why this is failing? I'm not entirely sure. But, when I saw this, I unplug the phone and plug it back in numerous times, to rule out that this might be a hardware problem. And, every time I plug it back in, it tries to install the drivers but fails. So, it's detecting my phone in Download Mode. I reboot and hope that it will detect normally, but no, it doesn't...
As a last resort, I went to Samsung.com and chatted with a service tech, he runs me through two procedures that I haven't done, the 'soft reset' and a 'master reset', which is done through Settings > Back up and Reset > Factory Data Reset. Neither worked, so, he then checks my IMEI and finds that I am still under the 1 year warranty and files a ticket for repair service. I asked him if there is a replacement warranty and he says that is done through my service provider (T-Mobile) with the Premium Handset Protection service, which I didn't add. Not because I didn't want to, but I can explain in later posts if someone is interested in why it wasn't added. So, now I have the return label in my inbox ready to be printed, taped onto a box containing my phone, and sent out. But, I can't go through with this because I have a custom ROM on the phone. There is no counter because I've already used Triangle Away, AFTER this started happening.
I am completely stumped... Any information is greatly appreciated!
EDIT: Also, I've disassembled the phone to check the MicroUSB port to see if any pins or prongs might've came loose. Everything is in tact.. I also wanted to see if the MicroUSB port was replaceable because I was able to find a spare MicroUSB ports on a website. But, it seems that the port isn't easily replaceable. It doesn't look removable, and I'm uncertain if it can be de-soldered to solder a replacement one on. Also, some thing caught my eye when I had it disassembled. There were two components of the phone that had SGH-I747 imprinted on them. I wasn't able to take pictures as I was in a rush to get it put back together, but thought it was of interest to bring up.
How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.
If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
http://d-h.st/zya
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
psykhotic said:
How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.
Click to expand...
Click to collapse
I was never able to flash the stock firmware because my computer fails to install drivers for it. I've also tried using the drivers from the toolkit and it gave me no results.
theexel said:
If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.
Click to expand...
Click to collapse
I just hopped on right now after trying the different USB ports on my computer while in Download Mode. Same deal, it detects, tries to install drivers, then fails. It's coming up as an Unknown Device.
DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I currently have the latest Kies installed. I'm going to uninstall and give that link a shot, though. Hopefully, Odin3 will be able to detect it, at least, so I can get the stock firmware back on this thing...
DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
No luck with those drivers neither..... =/
What version of Windows are you running?
Aerowinder said:
What version of Windows are you running?
Click to expand...
Click to collapse
Windows 7 x64
I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium
jasonpantuliano said:
I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!
johnx818 said:
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!
Click to expand...
Click to collapse
I had the same issue. Got my phone replaced and it worked fine.
eldgrim said:
I had the same issue. Got my phone replaced and it worked fine.
Click to expand...
Click to collapse
And that is exactly what im trying to do..
I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!
Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)
Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2
Have already done that. But just for laughs, I did do it again with no change.
can you get your D700 into download mode as described above?
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.
niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....
Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.
Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
re: flashing stock rom.
empire-1 said:
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
Click to expand...
Click to collapse
First thing to do is to put the phone into DOWNLOAD mode to TEST it and see if ODIN will recognize it.
If Odin recognizes it then there is NO need to send it back to Samsung, all it needs is a proper Odin flash.
Just because when all those missing apps and the usb had issues it does not necessarily mean that Odin will not recognize the phone.
If your computer is not working or you don't have a windows computer find a relative or a friend who has one.
Even a laptop computer would do just fine.
Good Luck!
Tried that
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
re: try this.
empire-1 said:
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
Click to expand...
Click to collapse
Try a different usb cable and or plug usb into different port,
if that fails, re-install the Samsung usb drivers for the phone.
Remember, if the phone goes into download mode 99.999% of the time the phone
can be flashed successfully using Odin.
The main reasons for usb issues in "download mode" are either loose connection to computer's usb ports,
usb cable intermittant or the Samsung usb drivers in the computer are corrupted in one way or another.
Thanks again
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
empire-1 said:
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
Click to expand...
Click to collapse
You are in a tough spot. I don't know if you have the stock recovery or not but if not you can either download the stock rom on the phone again...you know the best way although unethical really...being that the usb port is down is to re root it and flash a rom like the gt 1300 or whatever the international version is and intentionally hard brick your phone. Hard brick meaning won't even turn on withOut jtag and that even just clears everything out and reloads software like from the factory.If the phone won't boot up then there's no way for the person to tell its been modified. Majority of the time samsung doesn't get the damaged phones its some idiot making 8 bucks an hour to refurbish phones. That's what I would suggest you do being that the counter is still saying one flash
tmobile s3 running wicked. best rom i've ever used
Pretty sure I'm on stock recovery. it does give me an option to "apply update from external storage"
Thanks for all your help, I'll try to flash the stock rooted rom through the stock recovery although i'm not optimistic.
I will check out the wicked rom you mentioned, although I am a little hesitant to root my new one after this ordeal.
but how do I re root it if I have no usb or custom recovery?
re: flashing
empire-1 said:
but how do I re root it if I have no usb or custom recovery?
Click to expand...
Click to collapse
If you can get your phone to boot normally with any stock rom rooting will not be a problem at all.
If you get the phone working and booting properly you would be very lucky but from reading
everything you have wrote so far I highly doubt that you can successfully flash any rom at all
unless you have forgotten to tell us something.
Don't worry about rooting, worry about getting the phone to boot and work properly with stock rom.
yep. running stock recovery. hopeless?
re: flashing
empire-1 said:
yep. running stock recovery. hopeless?
Click to expand...
Click to collapse
I never said a word about stock recovery, I said STOCK ROM.
Invest in a JIG, it puts your phone into download mode instantly even if you cannot
do it manually with the three buttons as long as the phone is not completely dead.
You can buy a jig for less than $4.00 shipped on eBay, it's great little tool.
All you do is remove the battery from the phone and put it back in then simply plug
the jig into the usb port then in a couple seconds it will be in download mode then you
can unplug the jig and the phone is ready to be odin flashed..
Remember what I said before, just because the usb did not work with some
rom you flashed it does not mean that it will not work for download mode.
The jig was one of the best investments I have made when I started using these samsung android phones.
Once in download mode it will allow you flash the stock or stock rooted Jellybean 4.1.1 rom.
This is my best advice.
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
re: flashing
empire-1 said:
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
Click to expand...
Click to collapse
Before sending it back, if I were you I would find a friend or family member who has
a windows computer and just for the hell of it install the usb drivers in the computer
just to see for sure that while in download mode and connected usb cable if Odin still
is not lighting up the [COM:xx] top left rectangle on Odin screen.
I have odin flashed many phones dozens of times in the past 3 years and I have yet
to come accross one which goes into download mode but odin is not reconized
unless there is something wrong with the windows computer or usb ports and drivers.
That only happens as I said before, if there is something wrong with the drivers,
usb ports and or usb cables or some other malfunction in the windows computer.
Just think, if it works no need send the phone to samsung plus you would have learned
something too.
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
re: well that's it!
empire-1 said:
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
Click to expand...
Click to collapse
This is the first I heard that the usb did not work before and the usb socket might be broke.!!!
In that case since you cannot use the Wifi in your phone to transfer and install apps since it cannot boot normally
(unless I am missing something again) and you cannot use usb and it would not even help to remove the external
sd and copy any apps at all since you would have no way to install the apps.
Then you are right, you have to send it back, exchange it and hopefully you can come up
with a good enough excuse why it's not working so samsung will not charge anything )which I doubt)
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
empire-1 said:
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
Click to expand...
Click to collapse
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Josh McGrath said:
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Click to expand...
Click to collapse
Can you flash it through mobile odin? I don't know anything about the mobile version.
tmobile s3 running wicked. best rom i've ever used