[Q] Can't ODIN or flash, saying Unable to mount items - Sprint Samsung Galaxy Note II

I tried billard412's Sprint ROM restore to stock and something went haywire.. It rebooted and then it would just boot loop. Ok I thought I'll just Odin back .. but everytime I tried any TAR to Odin it would just stop at cache.img.. I am able to get into TWRP and when I tried a restore, it restored fine, but then it would say
E: Unable to mount /efs
E: Unable to mount /preload
E: Unable to mount /carrier
I've tried various operations, megawipes and such and it would still give me that error on my Sprint Galaxy Note 2 at the end.
Can anyone help me please?

This is scary! I was about to use that so I could do the full ma7 update but now I'm not so sure.
Maybe you should ask billard for ideas since he knows what actions his zip takes and *should* have clues about what parts could go wrong.
Sent from my SPH-L900 using xda premium

KEYofR said:
This is scary! I was about to use that so I could do the full ma7 update but now I'm not so sure.
Maybe you should ask billard for ideas since he knows what actions his zip takes and *should* have clues about what parts could go wrong.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I think if I had backed up my EFS folder I might be OK, but alas. I didn't .. This is my first Samsung phone, coming from HTC.... I asked in his thread but it's probably one of those one in a million chance type of things that happened to me

well if that didnt work i just had the same issue
due to upgrading to stock MA7 and flashing an LK8 rom with an MA7 stock kernal
i had to odin twrp recovery and run the restore zip from there since i cant mount preload
also if the zip dont work load a custom rom then go back to recover and try it then you should be able to odin again
*also when i went back to stock LJC i went to manual recovery and cleared cache and dalvik because when i did a factory reset E: failed again*

Tha_Dynasty2049 said:
well if that didnt work i just had the same issue
due to upgrading to stock MA7 and flashing an LK8 rom with an MA7 stock kernal
i had to odin twrp recovery and run the restore zip from there since i cant mount preload
also if the zip dont work load a custom rom then go back to recover and try it then you should be able to odin again
*also when i went back to stock LJC i went to manual recovery and cleared cache and dalvik because when i did a factory reset E: failed again*
Click to expand...
Click to collapse
billard was able to point me into the direction of a PIT that I used to re-partition the phone.. Now I just have the mouning /efs problem, which if I read correctly, I should have backed up.. that's where I am now. I was able to go back to stock but it boot loops and when I go into recovery I have the unable to mount ./efs error

jyan_osu said:
billard was able to point me into the direction of a PIT that I used to re-partition the phone.. Now I just have the mouning /efs problem, which if I read correctly, I should have backed up.. that's where I am now. I was able to go back to stock but it boot loops and when I go into recovery I have the unable to mount ./efs error
Click to expand...
Click to collapse
wow so the repartition didnt work?
i mean like i said you can try after doing stock you
can reboot go in to stock recoevery and clear things they may help
and also when loopinng i used twrp 2.4.0.1 i think thats the newest 1

Tha_Dynasty2049 said:
wow so the repartition didnt work?
i mean like i said you can try after doing stock you
can reboot go in to stock recoevery and clear things they may help
and also when loopinng i used twrp 2.4.0.1 i think thats the newest 1
Click to expand...
Click to collapse
Yea using the newest TWRP.. cleared everything.. tried multiple roms both rooted and stock.. i think it's a lost cause

jyan_osu said:
Yea using the newest TWRP.. cleared everything.. tried multiple roms both rooted and stock.. i think it's a lost cause
Click to expand...
Click to collapse
i dont think so i swear
i got same issue it even told me to connect to kies due to odin not working nor the restore for 1 click
you have to make sure when you went to recoevry and flashed the stock ljc
http://forum.xda-developers.com/showthread.php?t=2086769
it will take you back to stock period when your phone boots
you will have to shut it down and then go to recoveryt which it will be stock and then
wipe factory 2 times and then cache 2 times and that should repartition your phone
reboot it and then use a stock tar and then repartition you should be good to go and you even have 0 reset counts with stock LJC

Related

[Q] CM9 Install went bad

I upgraded to CWM5 and tried to install CM9 and now I get Assert Failed Getprop..... and it stops now it is stuck in a boot loop. I am guessing I have a bad download of the flash and will have to re-download.
elfranzen said:
I upgraded to CWM5 and tried to install CM9 and now I get Assert Failed Getprop..... and it stops now it is stuck in a boot loop. I am guessing I have a bad download of the flash and will have to re-download.
Click to expand...
Click to collapse
How is this a question? You already know the answer.
Sent from my CM9 Epic 4G.
elfranzen said:
I upgraded to CWM5 and tried to install CM9 and now I get Assert Failed Getprop..... and it stops now it is stuck in a boot loop. I am guessing I have a bad download of the flash and will have to re-download.
Click to expand...
Click to collapse
I agree with the former post.
For reference, here's an example of a question:
I'm Ron Burgundy?
Ok new Question now it is stuck in a reboot and I tried a new download of the flash. I odin back to stock then odin CWM5 wiped data and try to install the flash now it says verifying BLD/MTS (maybe) doesn't stay up very long and then goes into boot loop. now what should I try????
If I'm not mistaken converting from BML to MTD during the process you phone does reboot. I can't remember if it does it more then once.
But i could be wrong, i haven't flashed back to BML since i flashed CM7 before it was a RC0 build.
Sent from my CM9 Epic 4G.
OK download a 3rd flash download and tried again gets to checking state and starts rebooting I stopped it after 10 mins of reboots about 10 secs each. These are the steps I am doing
Odin to stock
after reboot Odin CWM5
after reboot copy Zip from laptop to 0000Flash folder on SD Card
Boot into CWM5 wipe Factory data and Cashe
Install Zip for SD card and
Finding
Opening
the checking state
Then reboots and reboots and reboots
what am I doing wrong
FYI.. I have tried 3 different mirrors just to make sure one of the Mirrors went bad.
I've seen this before does it go into a reboot and then shows cwm and shows the cwm robot with an red x or an error?
This IS a bad download...redownload it from the last mirror and odin back to el30 via stock tar reroot it and flash the new cm9
Sent from my SPH-D700 using xda premium
If you are 100% sure you are on the epic 4g with the keyboard then you need to Odin el30 and then cwm then flash cm9. It is failing getprop either because you don't have the right epic or your rom dev of the rom you are on messed up. Just Odin to el30 and repartition with a pit.
Sent from my SPH-D700 using Tapatalk
Yes I have the Epic 4G with keyboard I have had it for over a year and have flashed a bunch of different things to it. I have never seen it do this before. I will try and repartition but how should I go about doing it? I don't get the getprop error anymore just when verifying it goes for about a sec or two and then starts the reboots.
OK tried my 4th firmware download and same thing. all different mirrors anything else to try?
elfranzen said:
OK tried my 4th firmware download and same thing. all different mirrors anything else to try?
Click to expand...
Click to collapse
Give up
I'm not sure there's only been one case of this previously and even he got it done after a couple tries..
Wiped data cache and dalvik? I didn't see dalvik but don't see how that would cause this conflict.. I'm at a loss usually oding back to el30 rerooting then flashing a fresh cm9 works btw did you download cm9 via pc and transfer or your phone? Because I know data can be lost from phone to pc especially if its a bad cable aka stock usb.
Sent from my SPH-D700 using xda premium
elfranzen said:
OK tried my 4th firmware download and same thing. all different mirrors anything else to try?
Click to expand...
Click to collapse
Did you do as Marcusant suggested and Odin EL30 with repartition checked including the Victoryxxx PIT file?
Sent from my SPH-D700 using xda premium
were do I get the Victoryxxx PIT file?
I will try this I just read that you dont want to mess this up because you will brick your phone so I want to make sure I have the right file.
and No I will never give up I will find away to get it to work.
Never Mind got the Pit
Odin with Pit to EL30
rebooted
Odin CWM5
Rebooted
Wiped all data include Davlik
Installed Zip for SD
Checking state of BML/MTD
and rebooted but this time it booted all the Way. Thanks to all of you for the help.
elfranzen said:
Odin with Pit to EL30
rebooted
Odin CWM5
Rebooted
Wiped all data include Davlik
Installed Zip for SD
Checking state of BML/MTD
and rebooted but this time it booted all the Way. Thanks to all of you for the help.
Click to expand...
Click to collapse
Woot! You got it
Sent from my SPH-D700 using xda premium
You're welcome...it was a bad partition table apparently.
Sent from my SPH-D700 using xda premium
Funny thing I cant get the Gapps to install now. installs fine but doesn't show up in the apps. just can't win today.
when I boot into CWM now it wont mount the Cache. just gives me and error mounting /cache!
when I try to wipe user data it says
formatting /data
Error mounting /data!
skipping format...
formatting /Cache...
Error mounting /cache!
skipping format...
Formatting /sd-ext...
formatting /sdcard/.android_secure...
data wipe complete

[Q] TWRP Recovery Will Not Flash or Restore

I really hate to start a new thread but I really can't find a reason/solution to this issue. It's just as the title says. I tried flashing the MIUI ROM just as any ROM and got a failed error. Then went to do my nandroid restore and it just hangs on the splash screen (boot screen). Anyway I thought there could be a bad download so I took out the SD and redownloaded synergy on my laptop, then put it back in the phone and nothing but the nandroid should let me restore. I even tried moving the files to the internal SD and nothing. The only thing I can think of is to Odin back to stock? Is it the same method as rooting? I'm sure I can find that out, but I'm just confused why it seems TWRP doesn't want to work. Thanks for any help, it's 4 a.m. here and I'm dog tired.
Are you on the latest TWRP?
If all else fails you could go back to stock and root again.
DarkManX4lf said:
Are you on the latest TWRP?
If all else fails you could go back to stock and root again.
Click to expand...
Click to collapse
I think so. Yeah, just didn't want to go throught it all, and didn't know why.
jtadak said:
I think so. Yeah, just didn't want to go throught it all, and didn't know why.
Click to expand...
Click to collapse
Can I just reflash recovery from the state I'm in, or do I still need to unroot? I've moved some of my files to the ext SD within recovery but some things won't move and I really don't want to wipe it.
jd14771 said:
Try wiping everything 3X, then go to the reboot menu, and reboot system, wipe both the cache and dalvik cache and try to restore.
Click to expand...
Click to collapse
Do you mean reboot recovery? I can't reboot system. Sorry, not trying to split hairs, just trying to be specific.
Odin back to stock seems like the best option.
Sent from a galaxy note 2 far far away...
are you able to flash a different rom, say a stock rom? It's possible you got a corrupted TWRP download.
Since they just released another update 2.4.3, you might want to try and download the zip file, wipe cashe and davick (may want to do it three times). Reboot back into TWRP 2.4.3 and see if it gives you some better luck.
I've had Nandroid backup that didn't work for whatever reason. I didn't test it prior to needing it, and got burned. It just wouldn't show up in the restore menu.
On a side note, what error did you get when you tried flashing MIUI?
Try rebooting recovery when you are in recovery already once before flashing/restoring anything anything.
mexiking713 said:
Odin back to stock seems like the best option.
Sent from a galaxy note 2 far far away...
Click to expand...
Click to collapse
Yes, that's what I did. I'm just bummed I had to wipe storage. Oh well, it's inevedible... I dig that sig though, with phone line up.
lovekeiiy said:
are you able to flash a different rom, say a stock rom? It's possible you got a corrupted TWRP download.
Since they just released another update 2.4.3, you might want to try and download the zip file, wipe cashe and davick (may want to do it three times). Reboot back into TWRP 2.4.3 and see if it gives you some better luck.
I've had Nandroid backup that didn't work for whatever reason. I didn't test it prior to needing it, and got burned. It just wouldn't show up in the restore menu.
On a side note, what error did you get when you tried flashing MIUI?
Click to expand...
Click to collapse
I tried multiple ROMs, but not a stock one. Hmm, I was on 2.3.2.3. I did'nt get a special error, just said a red message saying failed.
Evo_Shift said:
Try rebooting recovery when you are in recovery already once before flashing/restoring anything anything.
Click to expand...
Click to collapse
Tried that. Did'nt work.
jd14771 said:
no, i meant reboot system, the recovery will warm you that there is no os installed but go fourth with it, it will turn off and reboot back to recovery. at that point in time, wipe cashe/dalvik cache and try to install.
Click to expand...
Click to collapse
Ok, I was'nt sure. I just went back to stock. I just wanted to know what exactly was going on and why.
The only thing different on my phone is I got a 32 gig SD card. I transfed some of my files a couple days before doing anything of this. That's the only thing I can think of. Even after root/unroot it STILL won't do my nandroid restore. I had so much time and work into the apps I set up, games, ect. Really freakin sucks. I even went into the the TWRP backup folder and made sure the backup files were there before doing anything. I never even got to flash many ROMs, I kinda just stayed on Jellybomb.
I had the uTorrent app installed and I noticed that it changed a lot of files with the "u" in front that the uTorrent app has. Anyone know why that is?
Sent from my SPH-L900 using xda app-developers app
This is what it did to a lot of my files. But not the ones I tried to flash.
Sent from my SPH-L900 using xda app-developers app

[Q] Cannot flash anything

T989 without any SD card in it, the one I had died apparently new one on order. Went to flash the latest PA rom but kept getting error 7 using CWM. I updated my recovery to the latest TWRP and still will not flash. I tried updating to the newest radio UVMC6, but that wont flash. I am currently on CM10.1 nightly. My process for flashing is recovery, superwipe, flash, which is when the flash errors out and I re wipe and then I can flash my CM10 back on. So I can flash CM10 all day long but nothing else. I searched on here and found that the ATT version of this phone has this problem and you have to flash an AOKP and then flash whatever you want, other phones with similar problems say use ODIN and flash stock and then go from there. I am just looking for any advice on this situation. I could not find anything specific enough in my search to help me and I am hoping someone here can. Thanks in advance.
Note: I have also tried flashing CM10.1 RC5 and has the same problems.
moebawlz said:
T989 without any SD card in it, the one I had died apparently new one on order. Went to flash the latest PA rom but kept getting error 7 using CWM. I updated my recovery to the latest TWRP and still will not flash. I tried updating to the newest radio UVMC6, but that wont flash. I am currently on CM10.1 nightly. My process for flashing is recovery, superwipe, flash, which is when the flash errors out and I re wipe and then I can flash my CM10 back on. So I can flash CM10 all day long but nothing else. I searched on here and found that the ATT version of this phone has this problem and you have to flash an AOKP and then flash whatever you want, other phones with similar problems say use ODIN and flash stock and then go from there. I am just looking for any advice on this situation. I could not find anything specific enough in my search to help me and I am hoping someone here can. Thanks in advance.
Note: I have also tried flashing CM10.1 RC5 and has the same problems.
Click to expand...
Click to collapse
For onw those superwipe scripts are not needed with twrp, u might be getting the error from that, are u trying to flash from internal SD card since ur external died? That might cause it but I don't think so, I would suggest trying a manual wipe of all partitions, data, system, cache, dalvik, 2x , then flash, if that doesn't work try using Odin, go back to stock and start over, that should fix it definetly
Sent from my SGH-T989 using xda premium
soupysoup said:
For onw those superwipe scripts are not needed with twrp, u might be getting the error from that, are u trying to flash from internal SD card since ur external died? That might cause it but I don't think so, I would suggest trying a manual wipe of all partitions, data, system, cache, dalvik, 2x , then flash, if that doesn't work try using Odin, go back to stock and start over, that should fix it definetly
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thank you... I wasnt sure about superwipe on TWRP since I just put it on and came from CWM. I am trying to flash from the internal card and the new external card will be at my doorstep tomorrow so I will drop that in as well. I will drop back in once I get all this done and hopefully all goes well.
Again thanks.
moebawlz said:
Thank you... I wasnt sure about superwipe on TWRP since I just put it on and came from CWM. I am trying to flash from the internal card and the new external card will be at my doorstep tomorrow so I will drop that in as well. I will drop back in once I get all this done and hopefully all goes well.
Again thanks.
Click to expand...
Click to collapse
Good glad I can help, let me know how it all goes, now I'm interested lol
Sent from my SAMSUNG-SGH-T989 using xda premium
Ok so I got my new SD card. Tossed that in, just figured I would try flashing from the external, no luck there. Same issues.
Odin back to stock using this tutorial http://forum.xda-developers.com/showthread.php?t=1513359&page=3
Used http://forum.xda-developers.com/showthread.php?t=2195283 this to regain root.
Got CWM back on but now I cannot flash SuperUser
When I go to flash Superuser it says
Mounting System
Deleting System:bin/su...
Deleting System:xbin/su
Extracting files to SYSTEM
Setting SYSTEM:bin/su permissions to 06755...
Creating SYSTEM:xbin/su symbolic link...
E: Error in /emmc/Superuser-3.0.7-efghi-signed.zip
(Status 0)
Installation aborted
So on the plus side I didn't brick the phone... downside now I am back to Gingerbread and currently stuck here...
Possibly a bad zip file?
Any ideas on this?
Quick update... I am a moron... Did not realize that root is kept with this restore... Got Superuser from market and am good to go.
Installing TWRP now and will have an update on the flash soon.
OK... the fun seems to have just begun
I cannot install TWRP from GooManager. No clue why, looking on here and I found //techerrata.com/browse/twrp2/hercules (cant link too new of a member)
So as it seems I can download the .img and GooManager should see it and if that doesnt happen I can install it through the terminal with these commands
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
OR flash it with ODIN... Which I would assume I get the .tar file and follow the same process as putting the recovery files in?
Aside from TWRP being an issue, I tried installing the PA rom with CWM and I got this:
Installing update
set_perm:some changes failed
E:Error in /sdcard/pa_hercule...zip
(Status 7)
Installation aborted
The same error I had in the first place
moebawlz said:
OK... the fun seems to have just begun
I cannot install TWRP from GooManager. No clue why, looking on here and I found //techerrata.com/browse/twrp2/hercules (cant link too new of a member)
So as it seems I can download the .img and GooManager should see it and if that doesnt happen I can install it through the terminal with these commands
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
OR flash it with ODIN... Which I would assume I get the .tar file and follow the same process as putting the recovery files in?
Aside from TWRP being an issue, I tried installing the PA rom with CWM and I got this:
Installing update
set_perm:some changes failed
E:Error in /sdcard/pa_hercule...zip
(Status 7)
Installation aborted
The same error I had in the first place
Click to expand...
Click to collapse
I'm not sure what your overall problem is, but if you are going to install TWRP do not use Goo Manager or the img file. They have been messing up peoples phones. Odin the tar or try the zip from the TWRP thread.
meekrawb said:
I'm not sure what your overall problem is, but if you are going to install TWRP do not use Goo Manager or the img file. They have been messing up peoples phones. Odin the tar or try the zip from the TWRP thread.
Click to expand...
Click to collapse
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Along with that after I got TWRP working through Goo Manager again I tried flashing PA again and I had the same error as I did in the first place.
Maybe my phone just hates anything but the nightly I had before...
moebawlz said:
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Click to expand...
Click to collapse
If you can boot into TWRP, then they must have fixed the Goo problem.
It seems like you have tried most everything. Maybe you should Odin back to stock. If you are comfortable doing it, that is.
i went to flash with goo last night and it bricked the phone kind of, i had to ODIN and reflash the CWM again and bam the phone rebooted no problem
meekrawb said:
If you can boot into TWRP, then they must have fixed the Goo problem.
It seems like you have tried most everything. Maybe you should Odin back to stock. If you are comfortable doing it, that is.
Click to expand...
Click to collapse
I did Odin back to stock before. I am still on stock gingerbread right now with root access and am getting the errors I have been. I followed the tutorials in the sticky thread that I posted before that got me back to stock.
Within TWRP I tried installing the newest Cyanogen Mod and got
E:Error executing updater binary in zip
Error flashing zip
When I try installing the PA rom I get the same error
Any thoughts? Would going back to stock through Odin and doing this again potentially fix it? or is that a shot in the dark?
Lucky for me I kept a backup saved on my PC from before I did anything here. So I am back to the CM 10.1 Nightly I started on for the time being.
Is there any other method of flashing a rom that I might be able to try?
moebawlz said:
I did Odin back to stock before. I am still on stock gingerbread right now with root access and am getting the errors I have been. I followed the tutorials in the sticky thread that I posted before that got me back to stock.
Within TWRP I tried installing the newest Cyanogen Mod and got
E:Error executing updater binary in zip
Error flashing zip
When I try installing the PA rom I get the same error
Any thoughts? Would going back to stock through Odin and doing this again potentially fix it? or is that a shot in the dark?
Click to expand...
Click to collapse
It would be a shot in the dark. I did a Google search for your error and a couple of people said they were able to fix it by using TWRP 2.3. That was for different phones though. Maybe try that before going stock.
I am by no means a pro at this and am still learning as I go. Just to make sure of what I am doing, can I Odin TWRP 2.3? I also found this
http://forum.xda-developers.com/showthread.php?t=1639673
or
http://forum.xda-developers.com/showthread.php?t=1658418
Just a thought here... I keep gettin emmc errors... I was reading about upgrading and downgrading TWRP through the Terminal Emulator and it said use emmc or sdcard depending on what the phone reads it as.
When I first got the phone i recall seeing emmc when i would go into any file browser. Now it just says sdcard0 (internal) & sdcard1 (external)
So how can I get recovery to stop looking for emmc and start looking for sdcard0?
Unless I am way off in left field here with this.
moebawlz said:
I am by no means a pro at this and am still learning as I go. Just to make sure of what I am doing, can I Odin TWRP 2.3?
Click to expand...
Click to collapse
Yes, use Odin and the 2.3.3.0 tar from the techerrata website. I like using the Odin method because I have never had a problem upgrading recovery that way. I don't know about the emmc errors because I have only used the dd method like twice.
Edit: Maybe your internal memory is corrupted? I'm not sure how to test for that though.
moebawlz said:
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Along with that after I got TWRP working through Goo Manager again I tried flashing PA again and I had the same error as I did in the first place.
Maybe my phone just hates anything but the nightly I had before...
Click to expand...
Click to collapse
I think u must be getting bad DL then because none of that sounds right lol, if u got twrp to load into your device and all is working fine then the only other option is a bad DL, try checking the DL with a root browser or something to see the size of the file, status 7 errors are from the zip, usually bad install script in the ROM, which could be caused by a bad DL, check the DL size and let me know
Sent from my SGH-T989 using xda premium
went back to 2.3.3 and still having the same error.
Is there a way to correct any possible errors in my internal memory?
moebawlz said:
went back to 2.3.3 and still having the same error.
Is there a way to correct any possible errors in my internal memory?
Click to expand...
Click to collapse
If the DL is good, I don't know what else to tell u that is very strange indeed, but interesting too, I've never not been able to install at all, I'm curious..
Sent from my SGH-T989 using xda premium

[Q] Stuck samsung screen even after odin stock

Hey guys hopefully you can help me. I was rooted for like 3 or 4 months now and have had not many problems or not anything I couldn't fix my self. My phone gets stuck on the Samsung Galaxy s4 screen anytime I reboot. I have tried different roms, different kernels, I even odin back to stock. I was using TWRP 6.0 then reverted back to TWRP 5.2 to see if that was causing the problem. Still have problems. I am going to re download the stock tar to see if it was a bad download but Odin checks the md5 and says it was good. Odin says passed every time also. Odin version is 3.07.
I get a error before and when trying to wipe dalvic cashe. I can wipe reg cash no problem. I think my phone is not mounting the internal storage when it reboots. I could be way off but need help asap. If I format super wipe with twrp then restart twrp and then factory reset I can install or restore a rom some times but still cant restart the phone. Any hope would be greatly appreciated.
EDIT
I wanted to edit my previous commet. LiquidSmooth seems to be running fine. So TW roms and GE roms **** up on my phone when I restart. so is it the internal systems when I have TW roms. I think it has something to do with partictions messing around maybe.
I like TW roms and want to continue to use them... Thank you
Get into recovery and do a factory reset, it is a must after you odin back to stock. Make sure you are also using a tmo kernel.
Thanks you
I got this problem a few days ago and found some topic including this one. You should check it out.
Well, what worked for me was Odin to stock firmware, root again, install recovery then custom rom. Now it's working fine. Try to downloading it again to see if it works. I downloaded mine from here, rooted and recovery it using this one.
TheAxman said:
Get into recovery and do a factory reset, it is a must after you odin back to stock. Make sure you are also using a tmo kernel.
Thanks you
Click to expand...
Click to collapse
+1 to what he said. I bet if you go into the stock recovery after odin flashing it will say something like cannot mount /data partition. Factory reset there, and it should fix that and make it mountable. (Its important to use the stock recovery factory reset after the odin, don't flash a custom recovery right after flashing)
This was incredibly helpful. I had the same issue. Thank you.
This is also applicable to the Verizon Wireless model.

Reboot loop [SOLVED]

So my sister recently bought a used phone running 4.1.2 and it started rebooting on its own for some reason or another. I am able to get into twrp 2.3.1.1 recovery and do a factory reset but the reboot loop problem still remains. I tried the other options in the wipe menu like wiping the internal storage but it says its unable to mount /data. Even in the Mount Menu i am unable to check the Mount data box.
I've also got the hurricane v4 rom downloaded but i am unable to install it for some reason. Is it because i am unable to mount the /data? Would a Format data work to install the hurricane rom? I've tried to download the 4.3 stock rom but not successful due to such a crappy internet connection. Luckily the hurricane v4 rom that i got from here supported the resume download function.
Ktulu89 said:
So my sister recently bought a used phone running 4.1.2 and it started rebooting on its own for some reason or another. I am able to get into twrp 2.3.1.1 recovery and do a factory reset but the reboot loop problem still remains. I tried the other options in the wipe menu like wiping the internal storage but it says its unable to mount /data. Even in the Mount Menu i am unable to check the Mount data box.
I've also got the hurricane v4 rom downloaded but i am unable to install it for some reason. Is it because i am unable to mount the /data? Would a Format data work to install the hurricane rom? I've tried to download the 4.3 stock rom but not successful due to such a crappy internet connection. Luckily the hurricane v4 rom that i got from here supported the resume download function.
Click to expand...
Click to collapse
I also have note 2 with this strange reboot problem.
The OS doesn't matter at all for me (check that also).
If the problem will still remain, then I must say that it's a hardware malfunction.
Mine has it too, and does some random reboots at any time, specially when it has been used for longer time.
Ktulu89 said:
So my sister recently bought a used phone running 4.1.2 and it started rebooting on its own for some reason or another. I am able to get into twrp 2.3.1.1 recovery and do a factory reset but the reboot loop problem still remains. I tried the other options in the wipe menu like wiping the internal storage but it says its unable to mount /data. Even in the Mount Menu i am unable to check the Mount data box.
I've also got the hurricane v4 rom downloaded but i am unable to install it for some reason. Is it because i am unable to mount the /data? Would a Format data work to install the hurricane rom? I've tried to download the 4.3 stock rom but not successful due to such a crappy internet connection. Luckily the hurricane v4 rom that i got from here supported the resume download function.
Click to expand...
Click to collapse
Try flashing the latest PhilzRecovery and give it a shot.
toulan said:
Try flashing the latest PhilzRecovery and give it a shot.
Click to expand...
Click to collapse
I have philz touch 6.26.6 clockworkmod v 6.0.4.8 installed. I go into the Wipe data/factory reset to do a factory reset but seems like it hangs and reboots. Seems like its unable to mount and format /data still. Can someone shed some light on this?
Ktulu89 said:
I have philz touch 6.26.6 clockworkmod v 6.0.4.8 installed. I go into the Wipe data/factory reset to do a factory reset but seems like it hangs and reboots. Seems like its unable to mount and format /data still. Can someone shed some light on this?
Click to expand...
Click to collapse
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.
singhpratik87 said:
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.
Click to expand...
Click to collapse
Installed the hurricane rom perfectly! Thanks!
One more thing, the phone is not getting service or recognizing the sim card. Is there anything i can do to get service again?
Ktulu89 said:
Installed the hurricane rom perfectly! Thanks!
One more thing, the phone is not getting service or recognizing the sim card. Is there anything i can do to get service again?
Click to expand...
Click to collapse
Go to settings and see if you see a baseband version is listed also check if imei is correct and doesn't start with 0049
Sent from my GT-N7100 using Tapatalk
singhpratik87 said:
Go to settings and see if you see a baseband version is listed also check if imei is correct and doesn't start with 0049
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
The baseband version says its unknown and imei says unknown too.
Ktulu89 said:
The baseband version says its unknown and imei says unknown too.
Click to expand...
Click to collapse
Okay you need to reflash modem I'm in phone so can't link you up with hurricane modem tool but in my signature it says JellyKat FAQ click on that and in there you'll see hurricane modem changer tool link , go visit that thread , download version 5, and flash it recovery , aroma install will open and choose one of the newer modems and see if that fixes your no sim card detected issue *fingers crossed *
Sent from my GT-N7100 using Tapatalk
singhpratik87 said:
Okay you need to reflash modem I'm in phone so can't link you up with hurricane modem tool but in my signature it says JellyKat FAQ click on that and in there you'll see hurricane modem changer tool link , go visit that thread , download version 5, and flash it recovery , aroma install will open and choose one of the newer modems and see if that fixes your no sim card detected issue *fingers crossed *
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Finally got it downloaded! I've tried one of the newer modems but no luck yet. I'm guessing keep trying until i get service right?
Ktulu89 said:
Finally got it downloaded! I've tried one of the newer modems but no luck yet. I'm guessing keep trying until i get service right?
Click to expand...
Click to collapse
Umm I had this issue once and flashing one of the modems solved my issue , you might have to restore efs backup look for Dr.Ketan thread on how to restore efs if modems don't work out
Sent from my GT-N7100 using Tapatalk
singhpratik87 said:
Umm I had this issue once and flashing one of the modems solved my issue , you might have to restore efs backup look for Dr.Ketan thread on how to restore efs if modems don't work out
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
None of the modems worked. I've deleted the /system and /data and all the steps you gave me and restored back to 4.1.2 with twrp and the darnedest thing happened. no reboot loop, only thing is that there still is no service. The GCI screen shows up when booting (my cell phone service) . i was pretty sure the efs was checked when i backed it up a few days ago. I think i dun goofed on this one.
EDIT: Looking at the 4.1.2 backed up rom on my computer, there is a efs.ext4.win.md5 and a efs.ext4.win file on there.
Ktulu89 said:
None of the modems worked. I've deleted the /system and /data and all the steps you gave me and restored back to 4.1.2 with twrp and the darnedest thing happened. no reboot loop, only thing is that there still is no service. The GCI screen shows up when booting (my cell phone service) . i was pretty sure the efs was checked when i backed it up a few days ago. I think i dun goofed on this one.
Click to expand...
Click to collapse
read this guide to restore imei if you have backed up efs http://forum.xda-developers.com/showthread.php?t=2420881 that's your last resort
singhpratik87 said:
read this guide to restore imei if you have backed up efs http://forum.xda-developers.com/showthread.php?t=2420881 that's your last resort
Click to expand...
Click to collapse
Flashing stock also reflashes the modem, does it not?
So there is still the 4.3 stock ROM which he was not able to download so far, unfortunately.
Yakobus said:
Flashing stock also reflashes the modem, does it not?
So there is still the 4.3 stock ROM which he was not able to download so far, unfortunately.
Click to expand...
Click to collapse
Yes it does so if he manages to download it ,things should be easier for him.
singhpratik87 said:
Yes it does so if he manages to download it ,things should be easier for him.
Click to expand...
Click to collapse
I would rather try to fix the download issues or to get the file from somebody else instead of wasting time on flashing modem after modem.
Yakobus said:
Flashing stock also reflashes the modem, does it not?
So there is still the 4.3 stock ROM which he was not able to download so far, unfortunately.
Click to expand...
Click to collapse
So i finally got a premium link download on rapidgator and am downloading this stock rom atm. so its resumable (hooray!).
When done, i use the "PHONE" option in odin right? Im guessing installing the stock rom also re installs the stock recovery? Crossing my fingers (and toes lol) hoping this download finishes. If her phone doesnt work after all this i talked her into letting me buy it. It seems like a really nice phone. If she lets me buy it im thinking to get the Moga controller afterwards and installing some emulators and games, it'll be a nice little portable system.
SOLVED
Finally got the stock 4.3 download and installed and now the phone is working. Thanks everyone who contributed to help.
Ktulu89 said:
Finally got the stock 4.3 download and installed and now the phone is working. Thanks everyone who contributed to help.
Click to expand...
Click to collapse
Great! Enjoy the phone
By the way, tags are usually put in front of a thread's title
Nevermind, the main point is to tag it as solved :good:

Categories

Resources