i want to know if is same device?
im going to put CM10 on him
should be a problem?
thanks?
You can check under your Settings>About Phone It should all be there. It shouldn't be a problem as long as the specs are the same. But just to be sure. Check out GSMarena
KiD3991 said:
You can check under your Settings>About Phone It should all be there. It shouldn't be a problem as long as the specs are the same. But just to be sure. Check out GSMarena
Click to expand...
Click to collapse
thanks but GSMARENA has only the I8150 model
this is waht i have
baseband-jjlm2
kernel-2.6.35.7
build-gingerbread.jjlm2
were i can compare between the two models
another thing.. if i do a nandroid backup and i try to install the CM 10 on the I8150T
and from some reasone the device not turn on properly, i will always can restore the old rom from the CWM?
R: can i flash rom of i8150 on i8150t device?
mataniluz said:
thanks but GSMARENA has only the I8150 model
this is waht i have
baseband-jjlm2
kernel-2.6.35.7
build-gingerbread.jjlm2
were i can compare between the two models
another thing.. if i do a nandroid backup and i try to install the CM 10 on the I8150T
and from some reasone the device not turn on properly, i will always can restore the old rom from the CWM?
Click to expand...
Click to collapse
The rom should work properly in all the functions except the RADIO (Call,SMS,web).
I think that the only difference between i8150 and i8150T is the antenna.
Inviato dal mio GT-I8150 con Tapatalk 2
miki2o said:
The rom should work properly in all the functions except the RADIO (Call,SMS,web).
I think that the only difference between i8150 and i8150T is the antenna.
Inviato dal mio GT-I8150 con Tapatalk 2
Click to expand...
Click to collapse
You'r right.
But i see the board is same. Maybe network will work if he not change the baseband.
If he can do nandbackup, maybe he can try.
What the antenna chip series btw.
ok i will try it
but if like you said everything going to work except the radio
which file i have to flash to get it work in israel? i try to search but i get lost there are many files
can you help me with a link?
i have to flash it with odin right?
thanks for your help
i really appreciate your work
I have the same question!
Can I flash I8150 rom over i8150t model???
thanks!
aboltus said:
I have the same question!
Can I flash I8150 rom over i8150t model???
thanks!
Click to expand...
Click to collapse
Read the thread.
Ok. I've read it.
So, as I understand I can do that but the RADIO won't work.
What should I do than? Can I flash without changing the radio? Can I install another file afterwards to make the radio work?
I8150t
miki2o said:
The rom should work properly in all the functions except the RADIO (Call,SMS,web).
I think that the only difference between i8150 and i8150T is the antenna.
Inviato dal mio GT-I8150 con Tapatalk 2
Click to expand...
Click to collapse
Hi
Is there a way to change to the antenna driver for i8150 in CM9/10 to the i8150t drive
If so can you please help me out I wanna install 1 of thes rom's but I dnt wanna lose 3g
Thanks in advance
miki2o said:
The rom should work properly in all the functions except the RADIO (Call,SMS,web).
I think that the only difference between i8150 and i8150T is the antenna.
Inviato dal mio GT-I8150 con Tapatalk 2
Click to expand...
Click to collapse
If the radio would get broken he probably would brick his phone. Fortunally this will not happen. The only thing that might get broken is the modem. So loosing Mobile Data.
See here
What could work to fix the modem is to replace it with one for the i8150. Meaning only the modem but not the baseband and having a copy of the 8150T modem (and baseband) just in case.
There is a guide on how to extract the baseband and there are links to flashable zips which are containing the baseband and modem for the 8150. So such a zip would need to be modified by removing the baseband there and just keeping the modem in it.
Anyway, even if this shouldn´t work you still can simply revert back by restoring your backup you hopefully made with CWM Recovery before flashing a 8150 firmware.
CM10 on i8150T
Hi,
I've read the thread, but I just wanted to know if anyone has actually got the i8150T work with CM10 with modem working ?
If yes, could you please post spefiic links/instructions ?
thanks!
Related
Has anyone figured out how to make a i8160P still a P after returning to stock GB. Any time I've tried to flash the original firmware the phone remains a regular i8160 and states that a custom power management has been installed. The NFC works but the device has no IMEI and insists at boot and in the device menu it is an i8160.
I don't think it is possible after you have flashed i8160 firmware
I've tried various different things but to no avail. It is a shame about my impatience. Especially considering the Germany i8160P, which is the one I have, has gotten the Jelly Bean update first. :silly:
Stevk said:
I've tried various different things but to no avail. It is a shame about my impatience. Especially considering the Germany i8160P, which is the one I have, has gotten the Jelly Bean update first. :silly:
Click to expand...
Click to collapse
Use I8160P GB SER ( include Pit File, ussualy) and then back to stock Germany GB for I8160P, and flash the new one...
If it doesn't work...
Go to your Samsung Service Center..
Sent from my GT-I8160 using xda app-developers app
WahyuGo said:
Use I8160P GB SER ( include Pit File, ussualy) and then back to stock Germany GB for I8160P, and flash the new one...
If it doesn't work...
Go to your Samsung Service Center..
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Sadly that first step doesn't work. It throws up the Custom Power Management Error and you loose your IMEI. Samsung won't deal with it since the device was not available in my region.
WahyuGo said:
Use I8160P GB SER ( include Pit File, ussualy) and then back to stock Germany GB for I8160P, and flash the new one...
Click to expand...
Click to collapse
As far as I know the is no SER (RUS) version of 8160P available only 8160...
Tried this also with the RUS 8160 GB to get back 8160P. But didn't work....
Why someone want to return to GB?
Sent from my GT-I8160P using xda app-developers app
hy,
please follow this link: http://www.ibtimes.co.uk/articles/4...ndroid412-jellybean-downgrade-gingerbread.htm
1 - install the firmware I8160XXLK6 rev00
2 - install the last firmware before updated to jelly bean for your model
3 - reset your phone
b0g said:
hy,
please follow this link: http://www.ibtimes.co.uk/articles/4...ndroid412-jellybean-downgrade-gingerbread.htm
1 - install the firmware I8160XXLK6 rev00
2 - install the last firmware before updated to jelly bean for your model
3 - reset your phone
Click to expand...
Click to collapse
This does not apply for 8160P (Ace 2 with NFC)... best case, you will have to flash back to MB2/MB4/MC8... mid case no modem/IMEI (no NFC, 3G, etc.)... worst case: brick! Do NOT attempt if you have 8160P!
I tried this, to regain NFC and to be able to flash JB ME1, but when trying to flash GB for 8160P over the Russian rom I got custom modem. Immediatly flashed back to MB2, stuck there now (MC8 is horrible!)
Shadowcareful said:
Why someone want to return to GB?
Sent from my GT-I8160P using xda app-developers app
Click to expand...
Click to collapse
I don't want to return to GB. I want to have a working I8160P with Jellybean firmware.
b0g said:
hy,
please follow this link: http://www.ibtimes.co.uk/articles/4...ndroid412-jellybean-downgrade-gingerbread.htm
1 - install the firmware I8160XXLK6 rev00
2 - install the last firmware before updated to jelly bean for your model
3 - reset your phone
Click to expand...
Click to collapse
I'll give this alternative method a go.
Stevk said:
I'll give this alternative method a go.
Click to expand...
Click to collapse
If you manage to install GB for 8160P w/o losing your IMEI, tell me how you did it... but probably you will encounter CUSTOM MODEM errors when flashing original 8160P fw (after having flashed SER for 8160)
You need a complete firmware.
The problem its I8160XXMB4. This Firmware include Bootloader, new memory management, ipl...
Once you have instaled mb4, your phone will be a "true" i8160 until you can flash a complete i8160p firmware, and in this moment, i believe that dont exit any complet i860p firmware, so You can still update your ace with any i8160 uptade, but not more i8160p, until some new "complete packaged" will be leak of course.
Could someone with a P that hasn't been flashed update a full firmware dump?
Should be "easy".
You need a i8160p rooted and some linux knowledge
The "only" problems are:
1º. You need to know the path to block files, normally they are in /dev/block
2º. You need to suppose that block are each partition (system, userdata, sdcard, modem, bootloader, sbl, cache...)
3º. You need a SD card with enough free space
Once you have all, should be "easy" dump each partition:
dd if=/dev/block/blockxxx of=/sdcard/bootloader.raw
dd if=/dev/block/blockxxy of=/sdcard/system.raw
...
where blockxxx should be each block device
But even when you can obtain all partitions and you can identify them, you still need create a firmware with them or flash some of them on other devices, with the correspondence risk and privacy problem form the dump owner... well, the owner could of course delete userdata, sdcard, efs... partitions
@primewell
You say MC8 is horrible because of the 482mb ram? Its just the official version... Whats so different and horrible between MC8 and MB2/MB4...
Sent from my GT-I9100 using xda app-developers app
teddytsen said:
@primewell
You say MC8 is horrible because of the 482mb ram? Its just the official version... Whats so different and horrible between MC8 and MB2/MB4...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I had it with 6xx MB ram... but I wanted an unbranded fw. Would love italian job, but e.g. the SMS app from android 4.2 sucks on the small screen, and some other things. Or does smb have the whole ME1 stock apps? Then I could flash them to MC8 italian job
Theliels said:
You need a complete firmware.
The problem its I8160XXMB4. This Firmware include Bootloader, new memory management, ipl...
Once you have instaled mb4, your phone will be a "true" i8160 until you can flash a complete i8160p firmware, and in this moment, i believe that dont exit any complet i860p firmware, so You can still update your ace with any i8160 uptade, but not more i8160p, until some new "complete packaged" will be leak of course.
Click to expand...
Click to collapse
Isn`t there any chance get the P orginal files back !?
maybe a full dump of an unflashed P ?
noone can help us !?
matthias1976 said:
Isn`t there any chance get the P orginal files back !?
maybe a full dump of an unflashed P ?
noone can help us !?
Click to expand...
Click to collapse
That seems like the only way to be honest. Thats what I had to do to my 'L' variant.
NZ John said:
That seems like the only way to be honest. Thats what I had to do to my 'L' variant.
Click to expand...
Click to collapse
Did u got succes with it !!
matthias1976 said:
Isn`t there any chance get the P orginal files back !?
maybe a full dump of an unflashed P ?
noone can help us !?
Click to expand...
Click to collapse
Exactly - thats the problem - We are still missing such an complete Bump of an 8160P, which was Stock GB....
We have this only eith this 8160 russian version ...
As I know, I8160ZS*** can't update to Jellybean.
And if I flash samsung official 4.1.2 (with baseband XX***), I will got "baseband unknown".
So I tried to flash CM10.2 by TeamCanjica, and replace /system/lib/tee files to my own.
After reboot, it works very good.
Baseband isn't unknown and IMEI isn't disappear.
But it still no signal.
I think it can be modified by developers.
Is it possible?
--------------
Sorry for my poor English.
No one knows how to fix it?
Or it is impossible?
No one knows how to fix it?
Or it is impossible?
joe820730 said:
No one knows how to fix it?
Or it is impossible?
Click to expand...
Click to collapse
try flash with i9070 4.1.2 TGY modem
yaulapman said:
try flash with i9070 4.1.2 TGY modem
Click to expand...
Click to collapse
do you have try it?
massun said:
do you have try it?
Click to expand...
Click to collapse
I haven't tried it but it seems possible cuz the S advance and the ACE2 uses the same chipset
Hi,
I have litreally nearly gone round the whole forum looking for a soluotion to this but none has helped. I have installed Cyanogenmod 10.1 for galaxy ace 2 (Gt-I8160ZSLK2) a hong kong device, since than the phone can't detect the sim card so I can't make any calls or text anyone because itt will just pop up with a message mobile network not found. Please can someone help me on this?
doctorwho201 said:
Hi,
I have litreally nearly gone round the whole forum looking for a soluotion to this but none has helped. I have installed Cyanogenmod 10.1 for galaxy ace 2 (Gt-I8160ZSLK2) a hong kong device, since than the phone can't detect the sim card so I can't make any calls or text anyone because itt will just pop up with a message mobile network not found. Please can someone help me on this?
Click to expand...
Click to collapse
Try Wipe Data then reflash the rom
Inviato dal mio GT-S5301 utilizzando Tapatalk
there is no jelly bean for hong kong version of ace 2.... there is no jellybean modem for you...
Thanks but...
Rox said:
there is no jelly bean for hong kong version of ace 2.... there is no jellybean modem for you...
Click to expand...
Click to collapse
Is there any firmware or custom rom that work with this device (Gt-I8160ZSLK2) because I really want jellybean.(Doesn't matter what version of jellybean)
doctorwho201 said:
Is there any firmware or custom rom that work with this device (Gt-I8160ZSLK2) because I really want jellybean.(Doesn't matter what version of jellybean)
Click to expand...
Click to collapse
this is the last GB firmware from sammobile http://www.sammobile.com/firmwares/3/?download=8312 but i find a rom(based on GB) for your phone
http://forum.xda-developers.com/showthread.php?t=1886207
Thanks
pedroleon99 said:
this is the last GB firmware from sammobile http://www.sammobile.com/firmwares/3/?download=8312 but i find a rom(based on GB) for your phone
http://forum.xda-developers.com/showthread.php?t=1886207
Click to expand...
Click to collapse
I have already tried this rom but is still based on GB but it doesn't matter hopefully someday or someone would release a jellybean firmware for galaxy ace 2. Thanks for trying to help though!
baseband
can you please give me the model the number .iit should be there when you turun on the phone under samsung galaxy ace 2
dharisd2 said:
can you please give me the model the number .iit should be there when you turun on the phone under samsung galaxy ace 2
Click to expand...
Click to collapse
Its the same phone as ours, but its the hk region model. its still GT-I8160.
Sent from my GT-I8160 using Tapatalk
dont understand that much
but i can flash some other countys even flash thailland firmware even the model is trinidad and thailand version i am using it here in my maldives .its perfect.
you mean its some other model and its for hong kong only right?
dharisd2 said:
but i can flash some other countys even flash thailland firmware even the model is trinidad and thailand version i am using it here in my maldives .its perfect.
you mean its some other model and its for hong kong only right?
Click to expand...
Click to collapse
it doesnt work like that for those hk region models
THanks guys
teddytsen said:
it doesnt work like that for those hk region models
Click to expand...
Click to collapse
Hey is there any way you can help me because there is litreally like no rom or firmware for galaxy ace 2 hong kong device. I really want jellybean on my device but I judt can't install it.:crying:
Man, you cant. Smsung didn release Modem fr HK verson ... you will never have working jb without it...
So you think this will work?
Rox said:
Man, you cant. Smsung didn release Modem fr HK verson ... you will never have working jb without it...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2538888
i have recently read this post and I was hoping would this work?
Hi !
I want to know if anyone can upload his stock tee folder from i8160PXXMG2 DBT (Germany) version !
Thanks
Hello everybody,
I just installed today on my i8160p the maclaw CyanogenMod 11.0. I did not backed up the gingerbread, because the option was not available. As many others report I can not connect to the mobile network and would need the system/lib/tee files to fix the problem.
I was wondering if anybody could send me this files or help me to find a work around.
Thank you very much!
Flash stock via odin and get the tee folder
Sent from my GT-I8160 using Tapatalk
PariahEU285 said:
Hello everybody,
I just installed today on my i8160p the maclaw CyanogenMod 11.0. I did not backed up the gingerbread, because the option was not available. As many others report I can not connect to the mobile network and would need the system/lib/tee files to fix the problem.
I was wondering if anybody could send me this files or help me to find a work around.
Thank you very much!
Click to expand...
Click to collapse
You have to flash jell bean first because our cm needs jb modem.
Sent from my GT-I8160
Thank you for your help!
If possible, I would need some additional help.
Can I directly flash know to jb? or do I have to flash gb first?
Do you know where I can find a step by step instruction to flash jb? The file link here in the forum (All Galaxy Ace 2 (gt-i8160/P/L) Jelly Bean Firmwares) does not work anymore. Do you may be know a place where I can find the correct version?
Thank you again!
Rox said:
You have to flash jell bean first because our cm needs jb modem.
Sent from my GT-I8160
Click to expand...
Click to collapse
What can I do
Hi, I was on cm10.2 non-p and I flash cm10.2 p version
Then when I rebot my simcard was not detected
Please help me
All the starts of the sky have came to my house to help me rigth now I've reinstall cm10.2 non-p and my sim card was working again I can't belive the luck I have
May be these can help !!!
IF THESE can help you
i uploaded the tee folder from cm 11 made For i8160P...press thanks if i helped you :laugh:
Samwix26 said:
Hi !
I want to know if anyone can upload his stock tee folder from i8160PXXMG2 DBT (Germany) version !
Thanks
Click to expand...
Click to collapse
mimminou said:
IF THESE can help you
i uploaded the tee folder from cm 11 made For i8160P...press thanks if i helped you :laugh:
Click to expand...
Click to collapse
I have the same problem with a GT-i8160P - no network... though the phone shows a valid IMEI
I have tried everything in all the posts here - with no success
then I saw this post... what do I have to do with this tee file??
did it work for you?
thanks beforehand
yes it worked
lourdes71 said:
I have the same problem with a GT-i8160P - no network... though the phone shows a valid IMEI
I have tried everything in all the posts here - with no success
then I saw this post... what do I have to do with this tee file??
did it work for you?
thanks beforehand
Click to expand...
Click to collapse
First : Its not a file -- its a folder
2nd--Follow thees steps
work only on jb Modem
didnt try it on Gb modem
u nedd to put it into /system/etc
i may forgot exactly where cause i'v never had a galaxy ace 2 but
if the directory's wrong just Google where
Location of tee folder
mimminou said:
First : Its not a file -- its a folder
2nd--Follow thees steps
work only on jb Modem
didnt try it on Gb modem
u nedd to put it into /system/etc
i may forgot exactly where cause i'v never had a galaxy ace 2 but
if the directory's wrong just Google where
Click to expand...
Click to collapse
The /tee folder is in system/lib
However the replacement does not make any change to my phone. I have 8160 not the p.
I have tried everything and no luck at all. I have flashed modems from odin, installed lots of roms, none of them can see my sim card and I have no network access.
PLEASE HELP
walttheboss said:
The /tee folder is in system/lib
However the replacement does not make any change to my phone. I have 8160 not the p.
I have tried everything and no luck at all. I have flashed modems from odin, installed lots of roms, none of them can see my sim card and I have no network access.
PLEASE HELP
Click to expand...
Click to collapse
Do you have the Hong Kong Ace 2? If yes you wont be able to install anything newer than gingerbread (The HK ace 2 has a baseband starting with ZS)
POLAND!!!
Porobu said:
Do you have the Hong Kong Ace 2? If yes you wont be able to install anything newer than gingerbread (The HK ace 2 has a baseband starting with ZS)
Click to expand...
Click to collapse
I bought the phone in China on TaoBao (Chinese EBAY) and it was made for Poland. It came with an unlocked 2.3.6 which from the beginning did not see my sim card. I flashed all the way up to cm11 and all worked great except the modem which never saw my sim card. I went back to stock European 2.3.6 two times and built it back up including trying to flash a modem or two. Still no sim.
I then found the official Chinese (has english too) 4.1.2 and flashed that with ODIN. All is working great but still no network. THEREFORE I am guessing that when this thing was built for Poland it had a special modem (hardware) that only works there?
Now I am downloading all the 4.1.2 firmwares built for Poland in the hope that one of them can drive whatever modem is in this thing.
Heading to bed now (UTC +8) and will report back in the morning.
walttheboss said:
I bought the phone in China on TaoBao (Chinese EBAY) and it was made for Poland. It came with an unlocked 2.3.6 which from the beginning did not see my sim card. I flashed all the way up to cm11 and all worked great except the modem which never saw my sim card. I went back to stock European 2.3.6 two times and built it back up including trying to flash a modem or two. Still no sim.
I then found the official Chinese (has english too) 4.1.2 and flashed that with ODIN. All is working great but still no network. THEREFORE I am guessing that when this thing was built for Poland it had a special modem (hardware) that only works there?
Now I am downloading all the 4.1.2 firmwares built for Poland in the hope that one of them can drive whatever modem is in this thing.
Heading to bed now (UTC +8) and will report back in the morning.
Click to expand...
Click to collapse
You have a Hong Kong Ace 2. You need to install Gingerbread with baseband ZS. And there is no JB update for the HK model
Defeated!
Porobu said:
You have a Hong Kong Ace 2. You need to install Gingerbread with baseband ZS. And there is no JB update for the HK model
Click to expand...
Click to collapse
I think you are right. I tried all of the above and nothing worked. It is sent back. What is the best baseband to ask for? I think that XX is well supported.
Best BaseBand Version
Can you tell me what baseband version I should try to buy?
I want to install KitKat on the ACE 2 and I know that the Hong Kong version will not work.
walttheboss said:
The /tee folder is in system/lib
However the replacement does not make any change to my phone. I have 8160 not the p.
I have tried everything and no luck at all. I have flashed modems from odin, installed lots of roms, none of them can see my sim card and I have no network access.
PLEASE HELP
Click to expand...
Click to collapse
Well...that's because you don't have the NFC Version....
Sorry but your problems can be solved only by reflashing another ROM and/or flashing a Stock JELLYBEAN (yes only Jb) firmware
Sent from my U8860 using XDA Free mobile app
mimminou said:
Well...that's because you don't have the NFC Version....
Sorry but your problems can be solved only by reflashing another ROM and/or flashing a Stock JELLYBEAN (yes only Jb) firmware
Sent from my U8860 using XDA Free mobile app
Click to expand...
Click to collapse
Sent the phone back. It was a ZS baseband and no way to update to JB or newer. Bought a S3 mini instead. Wife wants a smaller phone.
Okay then
The galaxy s3 mini is a good phone...trust me I tried it myself
Sent from my U8860 using XDA Free mobile app
Hi there,
Sorry for bringing up these old stuffs.
I have a GT-I8160 ace2 brought in Hong Kong.
Running GB 2.3.6, baseband: ZSLG1, Build no.: GB XXLK7
using this custom rom.
i tried flashing TWRP then cm-11-20140807-UNOFFICIAL-codina.zip and finally Gapps . And of course, PWNED. Everything run smooth&nice except no radio signal. Did some search here and noticed i should first flash JB firmware before going KK/cm11.
My problem now is which JB firmware i should pick? and where to download it as most links here were dead.
also, i assume the firmware is one i need odin to flash, while kernel & rom can be flashed via cwm/twrp. sorry for these dumb noob questions, as i have been away from my ace2 too long and missed so many stuffs. sorry.
Thank you.
Search for zslk2/zslg1 stock md5s
teddytsen said:
Search for zslk2/zslg1 stock md5s
Click to expand...
Click to collapse
This one of teddy could be easier to understand
http://forum.xda-developers.com/showthread.php?t=2669549
fluffi444 said:
This one of teddy could be easier to understand
http://forum.xda-developers.com/showthread.php?t=2669549
Click to expand...
Click to collapse
XD i forgot abt that