As I know, I8160ZS*** can't update to Jellybean.
And if I flash samsung official 4.1.2 (with baseband XX***), I will got "baseband unknown".
So I tried to flash CM10.2 by TeamCanjica, and replace /system/lib/tee files to my own.
After reboot, it works very good.
Baseband isn't unknown and IMEI isn't disappear.
But it still no signal.
I think it can be modified by developers.
Is it possible?
--------------
Sorry for my poor English.
No one knows how to fix it?
Or it is impossible?
No one knows how to fix it?
Or it is impossible?
joe820730 said:
No one knows how to fix it?
Or it is impossible?
Click to expand...
Click to collapse
try flash with i9070 4.1.2 TGY modem
yaulapman said:
try flash with i9070 4.1.2 TGY modem
Click to expand...
Click to collapse
do you have try it?
massun said:
do you have try it?
Click to expand...
Click to collapse
I haven't tried it but it seems possible cuz the S advance and the ACE2 uses the same chipset
Related
I also wanna know if we can do this...
I just want the original australian (optus) CSC back... cause I flashed over it not knowing what it is. Well, at least my phone works fine, but I'm a bit scared that I could have problems in future.
shouldnt your csc be in your stock firmware?.. CSC_xxx.tar should be it unless its missing?
raspdeep said:
shouldnt your csc be in your stock firmware?.. CSC_xxx.tar should be it unless its missing?
Click to expand...
Click to collapse
Can't find our stock firmware for optus. This is our versions:
PDA: DTJF3
Phone: DTJF3
CSC: OPSJF1
I would like a backup too before flashing, any ideas how?
hernit said:
Can't find our stock firmware for optus. This is our versions:
PDA: DTJF3
Phone: DTJF3
CSC: OPSJF1
I would like a backup too before flashing, any ideas how?
Click to expand...
Click to collapse
I would also like to know how to do this.
Root + this perhaps?
Javalu said:
I would also like to know how to do this.
Root + perhaps?
Click to expand...
Click to collapse
up with this program not work
stefano_na said:
up with this program not work
Click to expand...
Click to collapse
check this out mate:
http://forum.xda-developers.com/showthread.php?t=726673&highlight=backup
edit: meh, false alarm but u can always have a look
It seems like pail found a way to do this ... He said that his next rom doesn't require a pre flash
Sent from my GT-I9000 using Tapatalk
Please someone can help me?? after i installed the CyanogenMod 10.2 when i tipe *#1234# Phone appears "PHONE: XXXX" and i can't call for anyone.
My IMEI is the original.
About device
Baseband version
XXXX
Try another sim card if that doesn't work, restore a stock firmware.
answer
I already tried another SIM card and doesn't work
What OS were you running before?
hi I was wondering what region is your phone? Because I got A tgy phone which is hong kong I upgraded to cyanogenmod 10.1 and couldn't call anyone or text anyone. the basband was unknown so if you got the same problem i might be able to help you.
Hong Kong model is a different beast but the logic is the same, flash a 3-part stock JB firmware first (which doesn't exist for HK or 8160L models, can't remember now...)
doctorwho201 said:
hi I was wondering what region is your phone? Because I got A tgy phone which is hong kong I upgraded to cyanogenmod 10.1 and couldn't call anyone or text anyone. the basband was unknown so if you got the same problem i might be able to help you.
Click to expand...
Click to collapse
My phone is from Portugal
Ryccardo said:
What OS were you running before?
Click to expand...
Click to collapse
I think is is a original OS from samsung, android version 2.3.6
There is your problem, flash official JB before any 4.x custom rom
Ryccardo said:
There is your problem, flash official JB before any 4.x custom rom
Click to expand...
Click to collapse
I can't find a official JB before any 4.x custom rom, can you help me??
@up
Jellybean fw thread
http://forum.xda-developers.com/showthread.php?t=2340849
'Official JB before any 4.x'
Jb: 4.1.x+
Ics: 4.0.x
Gb: 2.3.x
What do you mean?
Sent from my GT-I8160 using Tapatalk
Slaingerz said:
I can't find a official JB before any 4.x custom rom, can you help me??
Click to expand...
Click to collapse
You need to flash 3-part firmware with Odin (http://d-h.st/6QB)
teddytsen said:
@up
Jellybean fw thread
http://forum.xda-developers.com/showthread.php?t=2340849
'Official JB before any 4.x'
Jb: 4.1.x+
Ics: 4.0.x
Gb: 2.3.x
What do you mean?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
All the links is for hotfile, in this case i need before any 4.x
Ryccardo said:
You need to flash 3-part firmware with Odin (http://d-h.st/6QB)
Click to expand...
Click to collapse
i'm downloading the file, more later i will back and say if that firmware work
Thank you
Ryccardo said:
You need to flash 3-part firmware with Odin (http://d-h.st/6QB)
Click to expand...
Click to collapse
This firmware is 4.1.2 android version and i need before any 4.x
Thank you on same
Im positive anyone couldve found this
http://d-h.st/AZN
Sent from my GT-I8160 using Tapatalk
teddytsen said:
Im positive anyone couldve found this
http://d-h.st/AZN
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
Thank you, i will try
Well i tried, now i have android version 2.3.6 but my baseband is XXXX or unknow.
Can someone help me???
You want 4.x? http://forum.xda-developers.com/showpost.php?p=49984883&postcount=7
Ryccardo said:
You want 4.x? http://forum.xda-developers.com/showpost.php?p=49984883&postcount=7
Click to expand...
Click to collapse
No Ryccardo, i already have 4.x but my baseband are XXXX and mobile network not available, Someone on this thread say to install before any 4.x and i installed but my baseband continue XXXX
Hello folks,
New to N7100, just got one out of the box with this info:
Product Code: MWD
PDA: N7100XXDMC3
CSC: N7100OJVDMC1
MODEM: N7100XXDLK7
Click to expand...
Click to collapse
sure it is still on 4.1.2
so according to sammobile, there is a 4.3 update for my product code since December.
OTA and Kies tells that I have the latest version installed.
im puuure stock...
(sure i know about odin....) but im wondering why it would not update normally?
am i missing something with this device?
thx in advance
Samer
EDIT: Oooops sorry Mod please move it to the right section...
Note 2 sure will satisfy you.
For now don't update yet , read about 4.3 and Knox, later decide if you want to update.
Sent from my GT-N7100 using xda app-developers app
samersh72 said:
Hello folks,
New to N7100, just got one out of the box with this info:
sure it is still on 4.1.2
so according to sammobile, there is a 4.3 update for my product code since December.
OTA and Kies tells that I have the latest version installed.
im puuure stock...
(sure i know about odin....) but im wondering why it would not update normally?
am i missing something with this device?
thx in advance
Samer
EDIT: Oooops sorry Mod please move it to the right section...
Click to expand...
Click to collapse
reboot on download mode and tell us what is written there.
or follow this guide and update with kies
note2nooby said:
Note 2 sure will satisfy you.
For now don't update yet , read about 4.3 and Knox, later decide if you want to update.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
no intentions to root...
cosmyndemeter said:
reboot on download mode and tell us what is written there.
or follow this guide and update with kies
Click to expand...
Click to collapse
everything is official
no traces for knox
samersh72 said:
everything is official
no traces for knox
Click to expand...
Click to collapse
try the given guide or do a factory reset and see if OTA works
cosmyndemeter said:
try the given guide or do a factory reset and see if OTA works
Click to expand...
Click to collapse
i will give it a try..
if it didnt work, my only way is with odin
is it safe to flash another 4.3 firmware than my product code (region) without facing imei/connectivity issues like sometimes happen with an s4?
thx
regards
samersh72 said:
i will give it a try..
if it didnt work, my only way is with odin
is it safe to flash another 4.3 firmware than my product code (region) without facing imei/connectivity issues like sometimes happen with an s4?
thx
regards
Click to expand...
Click to collapse
flash with odin a stock official firmware 4.3 (that you want) and is safe
Hello,
I on 4.4.2 KK (NB4) , and want to change my modem.
to which modem i can change?
thanks!
golan5 said:
Hello,
I on 4.4.2 KK (NB4) , and want to change my modem.
to which modem i can change?
thanks!
Click to expand...
Click to collapse
That one is the most recent one.
Skipjacks said:
That one is the most recent one.
Click to expand...
Click to collapse
I know, but on this modem nb4, the signal very low.
i want to install another modem
golan5 said:
I know, but on this modem nb4, the signal very low.
i want to install another modem
Click to expand...
Click to collapse
Assuming you have the official 4.4 update (bootloader, KNOX, etc) you can't downgrade your modem. Being as NB4 is the most recent modem available, you cannot change it until a newer firmware is released.
lordcheeto03 said:
Assuming you have the official 4.4 update (bootloader, KNOX, etc) you can't downgrade your modem. Being as NB4 is the most recent modem available, you cannot change it until a newer firmware is released.
Click to expand...
Click to collapse
so what i can do?
i not live in USA, and the signal very low!
there is another solution?
golan5 said:
so what i can do?
i not live in USA, and the signal very low!
there is another solution?
Click to expand...
Click to collapse
Not currently. No.
Sent from my GT-P5110 using Tapatalk
anyone know where I can find a pit file for my att note 8 ( n5120). Any help is appreciated
jok3sta said:
anyone know where I can find a pit file for my att note 8 ( n5120). Any help is appreciated
Click to expand...
Click to collapse
here is a pit from my n5120 (SGH-I467M)... hope it helps. (for some weird reason, this forum would not provide me a way to attach the file to my reply... even zipped, so i sent it to filehosting.org. )
(http://www.filehosting.org/file/details/623354/note8_n5120.pit)
md5sum : 7855bf7f0d54fe46e7b388ad1dda4d22
sewermike said:
here is a pit from my n5120 (SGH-I467M)... hope it helps. (for some weird reason, this forum would not provide me a way to attach the file to my reply... even zipped, so i sent it to filehosting.org. )
(http://www.filehosting.org/file/details/623354/note8_n5120.pit)
md5sum : 7855bf7f0d54fe46e7b388ad1dda4d22
Click to expand...
Click to collapse
thank you. The more I look into my issue the more i think its because I need a kit kat stock rom to flash via odin. Which is proving impossible. But that you anyway..
jok3sta said:
thank you. The more I look into my issue the more i think its because I need a kit kat stock rom to flash via odin. Which is proving impossible. But that you anyway..
Click to expand...
Click to collapse
try this...
http://www.sammobile.com/firmwares/download/31620/I467MVLUBNF3_I467MOYABNF3_TLS/
or
http://www.sammobile.com/firmwares/download/17550/I467UCAMF1_I467ATTAMF1_ATT/
its Android 4.x.x kitkat
sewermike said:
try this...
http://www.sammobile.com/firmwares/download/31620/I467MVLUBNF3_I467MOYABNF3_TLS/
or
http://www.sammobile.com/firmwares/download/17550/I467UCAMF1_I467ATTAMF1_ATT/
its Android 4.x.x kitkat
Click to expand...
Click to collapse
thank you.. the first one is for the i467m which i think is for telus. Would that work on a At&t version?. I dont plan on connecting the tablet to any service at all.. But can i still flash it? the second one is the one I already have. I need the 4.4.2 version. Thanks again for your help
jok3sta said:
thank you.. the first one is for the i467m which i think is for telus. Would that work on a At&t version?. I dont plan on connecting the tablet to any service at all.. But can i still flash it? the second one is the one I already have. I need the 4.4.2 version. Thanks again for your help
Click to expand...
Click to collapse
You shouldn't have any problem... All Hardware is the same between both units and I have run Roms for AT&T and non-AT&T, CM, Slim, and stock (TW)... all Roms were compatible. Right now my SGH-I467M is showing as a GT-N5120, running 4.4.2 on CivZ Flexburst KK... Only difference may be the modem, which might be more region specific for CSC.
sewermike said:
You shouldn't have any problem... All Hardware is the same between both units and I have run Roms for AT&T and non-AT&T, CM, Slim, and stock (TW)... all Roms were compatible.
Click to expand...
Click to collapse
Sweet. Ill try it out. Thank you for the help
Sent from my SM-G930P using Tapatalk
sewermike said:
You shouldn't have any problem... All Hardware is the same between both units and I have run Roms for AT&T and non-AT&T, CM, Slim, and stock (TW)... all Roms were compatible. Right now my SGH-I467M is showing as a GT-N5120, running 4.4.2 on CivZ Flexburst KK... Only difference may be the modem, which might be more region specific for CSC.
Click to expand...
Click to collapse
thanks for trying to help man. unfortunately this doesnt even begin to flash with Odin. It instantly fails.. I guess its time to toss this the trash and start looking for a new tab.. Thanks again