Related
I just hooked up my WiFi N router, and all my devices should be N, especially my Incredible2....however when I scan for networks, I can't get it to pick up. Is there something special I need to do on the phone, or do I need to set the router back to b/g/n?
Thanks
Mine doesn't pick up my "N" network either. I believe I'm broadcasting that at 5gHz. I'm not sure if the dinc2 can read that though.
Maybe set it to 2.8 GHz?
Sent from my Incredible 2 using xda premium
When I try to use my wifi connection at home its really really slow. Sometimes it just loads part of the websites or some other it doesnt load at all and I have to refresh it several times so it loads. I also have an iphone and a laptop which dont have this problem at all. Theyre working perfectly fine with my wifi connection.
This only happens with wifi, on 3g it works fine. I havent been able to try more wifi networks to see if this only happens with mine
Are you rooted? Could certainly be a kernel issue.
Sent from my Galaxy Nexus using XDA
AZ FadeOut said:
Are you rooted? Could certainly be a kernel issue.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
Yes its rooted. This is the kernel shown on the about menu
3.0.8-gda6252b
[email protected] #1
SMP PREEMPT Fri Apr 13 11:35:09 PDT 2012
To me it shouts out kernel issue. I've had graphical errors on stock where it shows I don't have any signal but everything still pulls up nice and fast. I would reccomend a new rom and or kernel
Sent from my Galaxy Nexus using XDA
It also could be a WiFi issue. I was having WiFi issues with my GNex also that I thought was the phone until I started tweaking my Router settings. Some devices are more forgiving to certain routers. In addition some devices Roam to different AP's much better than others.
I have 2 WiFi AP's in my house to span covereage across 2900sqft. I found that my WiFi was just conflicting with each other causing issues with speed and connection so this is what I did.
My Modem is a TWC Wireless Modem - WiFi turned off.
Router 1 Linksys E4200 is Bridged to TWC Modem it is dual band so I have the 5ghz band set MyHomeAP in mixed mode with a 40Mhz Spread, using 36 as the Channel. The 2.4Ghz band is set to MyHomeAP-N in N only mode with a 40mhz Spread and 11 as the channel. I need a seperate SSID here because it was causing conflicts and I needed a 2.4ghz connection upstairs for my Transformer Prime Tab since it does not support 5ghz radios.
Router 2 Netgear WNR300L with DD-WRT loaded is downstairs on the other side of the house. It is a 2.4 ghz router which I have set to MyHomeAP with a 20mhz spread set to channel 1. This allows my devices that are 5ghz compatible to Roam between each AP without conflicts.
So with all that I am now getting 45 mbs WiFi when I am upstairs and connected to the Linksys and 21 mbps downstairs when I am connected to the Netgear downstairs. The Tab is getting a consistent 15mbps on each router which is acceptable for me. This is an improvement from getting 3mbps anywhere in the else regardless of the closeness to the router or the device being used. I'm now able to maximizesmy use of the WideBand service which gets about 52 mbps on a wired connection most of the time.
The GN has lots of issues with different network gear and a lot of it can't be solved by tweaking. Seems like I've heard the most success stories with netgear. I'm using ubee and trendnet and my wifi isn't great. I get between 5 and 20 mbps and its choppy with a lot of disconnects.
NCguy said:
The GN has lots of issues with different network gear and a lot of it can't be solved by tweaking. Seems like I've heard the most success stories with netgear. I'm using ubee and trendnet and my wifi isn't great. I get between 5 and 20 mbps and its choppy with a lot of disconnects.
Click to expand...
Click to collapse
You always have to be careful using multiple Wireless routers in the house, because if they are not setup right you will get consistent disconnects and low speeds. Same thing was happening to me until I really digged in and configured my multiple routers correctly. Check my previous post on how I solved my router issues.
Are you getting good signal when your connected to your wifi
HeCareth said:
You always have to be careful using multiple Wireless routers in the house, because if they are not setup right you will get consistent disconnects and low speeds. Same thing was happening to me until I really digged in and configured my multiple routers correctly. Check my previous post on how I solved my router issues.
Click to expand...
Click to collapse
Just one router, the time warner ubee docsis 3.0 modem/router. The rest are trendnet APs at 1,6,11. All with same ssid and security. No interference as checked with wifi analyzer. The wifi just sucks. Not much more you can say except try different gear which shouldn't be necessary. All of my laptops etc work great.
I tried my gnex on other wifi network and it worked well. I tried it again on mine with negative results. Idk what could be wrong, all other devices i have, 2 laptops and 1 iphone work well
survivor_evil said:
I tried my gnex on other wifi network and it worked well. I tried it again on mine with negative results. Idk what could be wrong, all other devices i have, 2 laptops and 1 iphone work well
Click to expand...
Click to collapse
What's wrong is the GNs wifi doesn't play nice with all network gear as it should. Just curious, what is your router and APs?
NCguy said:
What's wrong is the GNs wifi doesn't play nice with all network gear as it should. Just curious, what is your router and APs?
Click to expand...
Click to collapse
Ok this is my wifi configuration. what could the problem be? My nexus still works like crap on my wifi network
survivor_evil said:
Ok this is my wifi configuration. what could the problem be? My nexus still works like crap on my wifi network
Click to expand...
Click to collapse
Is there a reason you are not using "all" foe your basic and transmission rates. I have dd-wrt also and that is set to all for me.
Sent from my Galaxy Nexus using xda premium
HeCareth said:
Is there a reason you are not using "all" foe your basic and transmission rates. I have dd-wrt also and that is set to all for me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
nothing special i just reset the router to see if that helped but its the same
survivor_evil said:
Ok this is my wifi configuration. what could the problem be? My nexus still works like crap on my wifi network
Click to expand...
Click to collapse
Your basic rate is set to 1-2mbs, so don't expect more than that. Change it to 54mbs or whatever the max is and see if it helps.
Sent from my HP Touchpad running ICS
EP2008 said:
Your basic rate is set to 1-2mbs, so don't expect more than that. Change it to 54mbs or whatever the max is and see if it helps.
Sent from my HP Touchpad running ICS
Click to expand...
Click to collapse
Even if i change it to 10mb it.doesnt make a difference. As i said before. I have 2 laptops and 1 iphone and all of them work perfectly except the nexus
Wondering if anyone else is having issues connecting to a 5ghz network? I wasn't able to get it working, wouldn't even show up in available networks. That was stock out of the box, and after flashing a couple ROMs. I'm using slimbean now and am able to connect, but I have to turn WiFi on/off several times on the n7 before it shows up and connects. My s 3 connects no problem.
And I've tried all the standard troubleshooting on the router. Even changed some settings on the 5GHz band.
So if someone could double check for me that would be great!
Sent from my Nexus 7 using Tapatalk 4
5ghz works great for me. Reception is the best I've ever gotten on that band. Currently on stock, but it's worked in CM10 too
The 5 ghz didn't show up for me either. Had to manually enter the SSID and it connected right away.
Sent from my Nexus 7 using xda premium
On the first boot it didn't show my 5GHz WiFi, but after I connected it to my 2.4GHz, it immediately downloaded an update and rebooted itself. When it came back up, it saw my 5GHz.
Sent from my SGH-T889V using xda premium
Mine didn't at first either, but after update/reboot no problem. Now connecting at 150meg on 5ghz.
Sent from my Nexus 7 using Tapatalk 4
Still hit or miss for me. Sometimes its connected when I reboot. Usually I have to toggle WiFi on/off 2-3 times.
Sent from my Nexus 7 using Tapatalk 4
My Nexus 7 connects to my 5ghz router band all the time. I think it actually prefers it. I'm using it right now.
Sent from my Nexus 7 using xda premium
Well I think I have it working. I gave the n7 a static address and now after a half dozen reboots its auto connecting every time. I tried changing channels on the router. Tried 20/40 MHz channel width. Ticked on/off all the options on n7 WiFi settings. Nothing worked. Then I set static address on my tablet and router and like I said so far so good.
I'll update if there are any other issues because doing a search showed a lot of other devices having this issue. But none of the results recommended setting a static address. Maybe I got lucky. I could use my 2.4GHz network reliably but I want full network speed since I only have the 16 GB model and do a lot of folder syncs to keep my SD storage free.
Edit: scratch that. Worked half dozen times in a row. Rebooted after I wrote this and it didn't connect.
Sent from my Nexus 7 using Tapatalk 4
During initial setup i was not able to connect to my 5ghz but i was able to connect to my 2.4ghz. After setup was complete i was able to go in and switch it manually to the 5ghz network. If i power the device off and turn it back on it would not connect to my 5ghz or my 2.4ghz. I then went into wifi advanced settings and switched to 5ghz only and it connected immediately to the network and hasn't lost it since. This was true before and after the update, i am stock, unlocked and rooted. I also do not broadcast my ssid.
mr1ncred1ble said:
During initial setup i was not able to connect to my 5ghz but i was able to connect to my 2.4ghz. After setup was complete i was able to go in and switch it manually to the 5ghz network. If i power the device off and turn it back on it would not connect to my 5ghz or my 2.4ghz. I then went into wifi advanced settings and switched to 5ghz only and it connected immediately to the network and hasn't lost it since. This was true before and after the update, i am stock, unlocked and rooted. I also do not broadcast my ssid.
Click to expand...
Click to collapse
If I am connected to 5ghz and go in advanced and select 5ghz only, it disconnects me from WiFi. It will still show my 5ghz network in range with good signal but if I now try to connect..it does nothing. Keep clicking connect and nothing happens. Then go back and put frequency on auto and the 5ghz disappears. I then have to toggle WiFi 4-6 times before it connects again to the 5ghz.
Strange.
Sent from my Nexus 7 using Tapatalk 4
I had the same problem at first too. Here's what solved it for me: set 5ghz frequency to 20mhz instead of auto, change the channel from auto to any number you want, 5ghz will most likely be completely clear in your area so just choose any channel. After doing that it should see the 5ghz network every time and connect automatically.
Sent from my Nexus 7 using Tapatalk 4
Same issue here. But i have to restart my device. Is it hardware or software you guys think?
ikon8 said:
I had the same problem at first too. Here's what solved it for me: set 5ghz frequency to 20mhz instead of auto, change the channel from auto to any number you want, 5ghz will most likely be completely clear in your area so just choose any channel. After doing that it should see the 5ghz network every time and connect automatically.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I've tried that. One of the first things I did.
mystycs said:
Same issue here. But i have to restart my device. Is it hardware or software you guys think?
Click to expand...
Click to collapse
I'm not sure. Seems like software to me because once its connected it stays connected. And the signal range is really good. Better WiFi than any phone I've ever had. Better than my laptop too. My s3 has no problems connecting. Even with all the router settings I've tweaked its never had an issue connecting with the s3.
Are you able to connect?
In another thread someone noticed his WiFi settings were set to Europe. He said he hadn't changed them and that he was fresh on stock (his first time booted). Double check your settings if you're still having issues.
Settings | WiFi | advanced | WiFi region code.
Mine was also set to Europe as well for some reason. If your router is setup to use a channel not available in Europe this would cause the problems described here.
Sent from my Nexus 7
EmuZombie said:
In another thread someone noticed his WiFi settings were set to Europe. He said he hadn't changed them and that he was fresh on stock (his first time booted). Double check your settings if you're still having issues.
Settings | WiFi | advanced | WiFi region code.
Mine was also set to Europe as well for some reason. If your router is setup to use a channel not available in Europe this would cause the problems described here.
Sent from my Nexus 7
Click to expand...
Click to collapse
Thanks for the tip. Unfortunately it doesn't help. I've tried several channels on the router too.
Sent from my Nexus 7 using Tapatalk 4
I contacted google about this today they said theyll look into it. So maybe if we let them know theyll know its a issue that is bothering us.
mystycs said:
I contacted google about this today they said theyll look into it. So maybe if we let them know theyll know its a issue that is bothering us.
Click to expand...
Click to collapse
Could you put a Link up where you contacted them? Thanks!
Sent from my Nexus 7 using Tapatalk 4
highfigh said:
Could you put a Link up where you contacted them? Thanks!
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I called them here
https://support.google.com/nexus/7/
1-855-836-3987 (855-83-NEXUS)
Update..powered on after a few hours and it did not connect to 5ghz. Went in to the advanced settings and switched from 5ghz to 2.4 and back again and connected right away. Will try the region code, to see if it helps.
update to the update: flashed vanir 4.3.081213 and wifi connected to my 5ghz right away and has continued working through two reboots so far. On stock rooted 4.3 i had to toggle wifi frequency to get it to connect after every reboot.
Sent from my Nexus 7 using XDA Premium HD app
OK guys, I think I have as real solid lead on this bug. I'll update with some info a little later, I want to test this some more. But for now I'll say that I made some changes and I have had zero disconnects or problems connecting while toggling or after reboot. And I mean 100% connection rate after 50 toggles and a dozen reboots.
Till I can get the info up, one question for you guys having the same issue. Do you have multiple routers in your network and/or custom firmware on your router?
Sent from my Nexus 7 using Tapatalk 4
My phone refuses to connect to my 5GHz wifi, it says authentication error. Anyone else with this problem?
No issues on my Net Gear Nighthawk
Sent from my Galaxy Note 4 on Verizon unlimited!
note 4 5ghz wifi not working
I have same problem my note 4 verizon is not connecting to my 5ghz band but working fine with 2.5ghz
i have belkin ac1300 router.
asjassar said:
I have same problem my note 4 verizon is not connecting to my 5ghz band but working fine with 2.5ghz
i have belkin ac1300 router.
Click to expand...
Click to collapse
So it's not just me. Hmm.
Yes i think its aome software problem because it worked for me first time only for a 10 mins and then it never connected.
I even tried hard reset but not successfull.
So I tried connecting to it again, and I noticed it keeps losing sight of the wifi connection. It will show my 5GHz network out of range, and then try to connect, then show it out of range for a bit again.
I found a solution go to wifi settings and go to menu and advanced and turn off smart network switch and always allow scanning. And then reset ur modem and router and it should work .
It worked for me and now my 5ghz is working fine.
Mine has worked since I got the phone. With the authentication error, are you positive you've entered the correct key? With the weak signal, have you tried a different channel, maybe some interference going on???
Sent from my SM-N910V using XDA Free mobile app
5 works ok with my asus router and speed went from 13mp/s to 29mp/s ....
fillyo said:
No issues on my Net Gear Nighthawk
Sent from my Galaxy Note 4 on Verizon unlimited!
Click to expand...
Click to collapse
asjassar said:
I found a solution go to wifi settings and go to menu and advanced and turn off smart network switch and always allow scanning. And then reset ur modem and router and it should work .
It worked for me and now my 5ghz is working fine.
Click to expand...
Click to collapse
Didn't do anything for me.
mr_cj said:
Mine has worked since I got the phone. With the authentication error, are you positive you've entered the correct key? With the weak signal, have you tried a different channel, maybe some interference going on???
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
Yup I'm sure, it's the same password as the 2.4GHz network. Besides that, it works for my laptop and tablet perfectly fine.
I reset my modem and router again and now it worked. Guess it just took some motivation lol.
On 2.4GHz I got like 15-25mbps on my wifi.
Here's 5GHz:
Wish Verizon's LTE wasn't pathetic compared to the competition, especially given how expensive they are.
Noticed a very slow connection when using home WiFi, my wife gets around 70Mbps using her iPhone 7 while I only get 4Mbps with my OnePlus 3! When using my workplace WiFi I get high numbers and my 4G connection is good most of the time.
I have a 100Mbps internet at home and my router is D-Link DSL-6740U maybe I need to change something in the configuration?
Currently running Oxygen OS 4.1.3 but I had this issue even before the latest update.
Help would be highly appreciated!
yosifun said:
Notice a very slow connection when using home WiFi, my wife gets around 70Mbps using her iPhone 7 while I only get 4Mbps with my OnePlus 3! When using my workplace WiFi I get high numbers and my 4G connection is good most of the time.
I have a 100Mbps internet at home and my router is D-Link DSL-6740U maybe I need to change something in the configuration?
Currently running Oxygen OS 4.1.3 but I had this issue even before the latest update.
Help would be highly appreciated!
Click to expand...
Click to collapse
Apple has a way faster modem.. Are you both connected on 5Ghz?
Puddi_Puddin said:
Apple has a way faster modem.. Are you both connected on 5Ghz?
Click to expand...
Click to collapse
Maybe but it doesn't explain why I get a better connection at work or why both her iPhone and our laptop get +50Mbps while I get 4Mbps.. How can I check we are both connected on 5Ghz?
Sent from my ONEPLUS A3000 using Tapatalk
yosifun said:
Maybe but it doesn't explain why I get a better connection at work or why both her iPhone and our laptop get +50Mbps while I get 4Mbps.. How can I check we are both connected on 5Ghz?
Click to expand...
Click to collapse
If you click on the wifi network you are currently connected to it will show some info.
Puddi_Puddin said:
If you click on the wifi network you are currently connected to it will show some info.
Click to expand...
Click to collapse
I'm connected to via 2.4GHz, how can I check on the iPhone?
Sent from my ONEPLUS A3000 using Tapatalk
yosifun said:
I'm connected to via 2.4GHz, how can I check on the iPhone?
Click to expand...
Click to collapse
Not sure.. Pretty sure Google knows!
Let's assume the iPhone is connected via 2.4GHz as well, what could be the problem with my OnePlus?
Sent from my ONEPLUS A3000 using Tapatalk
Bluetooth on?
sv2203 said:
Bluetooth on?
Click to expand...
Click to collapse
No
Sent from my ONEPLUS A3000 using Tapatalk
Cant remember where I read, but try and change in your router the wireless channel the 2.4GHz is running on. By default it may be set to automatic, try setting it to 7 or 11. Iphone and pc's don't have an issue with the auto channel, but some android phones do.
The wifi antenna or chip in the OP3 is awful. I can get maybe 30Mbps on it with a fiber connection. My old Note 4 has hit a Max of 560Mbps sitting right next to the OP3. Both on 5GHz. Note 4 is MIMO, OP3 is a single channel and not very good.
nine5raptor said:
The wifi antenna or chip in the OP3 is awful. I can get maybe 30Mbps on it with a fiber connection. My old Note 4 has hit a Max of 560Mbps sitting right next to the OP3. Both on 5GHz. Note 4 is MIMO, OP3 is a single channel and not very good.
Click to expand...
Click to collapse
Don't think it's an antenna issue because I get +90Mbps on my workplace WiFi..
Sent from my ONEPLUS A3000 using Tapatalk
kenboyles72 said:
Cant remember where I read, but try and change in your router the wireless channel the 2.4GHz is running on. By default it may be set to automatic, try setting it to 7 or 11. Iphone and pc's don't have an issue with the auto channel, but some android phones do.
Click to expand...
Click to collapse
This indead looks like an android-wifi issue , I get the same low speed with my old Nexus 5.. I tried changing the channel to both 7 or 11 but it didn't improve the speed.
Any idea on what I should change in my router settings?
Sent from my ONEPLUS A3000 using Tapatalk
The phone occasionally has problems connected to older routers using IPv6. This was addressed in OOS 4.0.3, but they removed the option to disable IPv6 on OOS 4.1.x. If your router has the ability, try disabling IPv6 there. If not, try following this guide and see where it gets you.
yosifun said:
This indead looks like an android-wifi issue , I get the same low speed with my old Nexus 5.. I tried changing the channel to both 7 or 11 but it didn't improve the speed.
Any idea on what I should change in my router settings?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
on your phone, go to settings > wifi > press menu (3 dots) > advanced > wifi frequency band > set to 2.4GHz
try resetting your router. unplug power and let it set for 30 sec, then plug power back in.
check for ip adress confilcts