i neded to flash stock 3uk romy (any) and lock bootloader
i have customn rom and custom recovery
INFODEBUG: cid: H3G__001
version-main: 1.28.771.9
i found solution but maybe its wrong
1.fastboot oem lock
then i have message in bootloader:
https://www.dropbox.com/s/oq8e5ko9p3zexbl/20130213_032052.jpg
and then i downloaded:
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.28.771.9_Radio_1.1204.103.14H_release_256494_signed
im in fastboot but i have error 170 problem with connection.
can someone please help me...
lukers said:
i neded to flash stock 3uk romy (any) and lock bootloader
i have customn rom and custom recovery
INFODEBUG: cid: H3G__001
version-main: 1.28.771.9
i found solution but maybe its wrong
1.fastboot oem lock
then i have message in bootloader:
https://www.dropbox.com/s/oq8e5ko9p3zexbl/20130213_032052.jpg
and then i downloaded:
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.28.771.9_Radio_1.1204.103.14H_release_256494_signed
im in fastboot but i have error 170 problem with connection.
can someone please help me...
Click to expand...
Click to collapse
so you have fastboot up and running, if you give the fastboot command
fastboot devices
it gives a serial back in the command window ? (your bootloader says fastboot usb, so i guess it should be fine)
how did you execute the RUU, did you execute the RUU with admin rights (right click the ruu.exe and select run with admin rights)
Mr Hofs said:
so you have fastboot up and running, if you give the fastboot command
fastboot devices
it gives a serial back in the command window ? (your bootloader says fastboot usb, so i guess it should be fine)
how did you execute the RUU, did you execute the RUU with admin rights (right click the ruu.exe and select run with admin rights)
Click to expand...
Click to collapse
fastboot devices - back
SH24XW111133 fastboot
ruu as amin
after if have this message relocked security warning if i want use phone i have to:
fastboot getvar battery-voltage
fastboot reboot-bootloader
ping /n 6 localhost >nul
and unlock bootloader ant then my old rom is working but because i want unlock my phone i have from network unlock pin but not working i someone said that i have to back to stock with lock bootloader.
and i cant find answer
why i have this error 170 in fastboot?
this ruu is ok: RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.28.771.9_Radio_1.12 04.103.14H_release_256494_signed?
the only thing i noticed that radio its diffident in ruu then in bootloader. and im using Windows 7 and when im in fastboot windows see phone as fastboot.
The main version matches so that should be fine. What you can try is this :
Flash the stock recovery 1.28 and the stock boot.img back first. Then relock the bootloader and run the ruu again.
Mr Hofs said:
The main version matches so that should be fine. What you can try is this :
Flash the stock recovery 1.28 and the stock boot.img back first. Then relock the bootloader and run the ruu again.
Click to expand...
Click to collapse
i reinstalled drivers and connect to diffrent usb and ruu start but now during process error 155??? The flash fails at checking mid/cid and before that there is image version 1.28.771.0 to image version 1.28.771.0
so i will try
Flash the stock recovery 1.28 and the stock boot.img back first???
i did unpack ruu and from rom.zip recovery and boot from (RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.28.771.9_Radio_1.12 04.103.14H_release_256494_signed)
i did:\
C:\fastboot>fastboot flash boot boot.img
sending 'boot' (4282 KB)... OKAY
writing 'boot'... INFOFormat partition LNX done
OKAY
C:\fastboot>fastboot erase cache
erasing 'cache'... OKAY
C:\fastboot>fastboot flash recovery recovery.img
sending 'recovery' (5790 KB)... OKAY
writing 'recovery'... INFOFormat partition SOS done
OKAY
then
C:\fastboot>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
C:\fastboot>fastboot erase cache
erasing 'cache'... OKAY
this time no security warning
ant then in fastboot ruu again and error 155 again
thanks for your help
Download this one
http://androidfiles.org/ruu/securek...adio_1.1204.105.14H_release_260888_signed.exe
Try again
Mr Hofs said:
Download this one
http://androidfiles.org/ruu/securek...adio_1.1204.105.14H_release_260888_signed.exe
Try again
Click to expand...
Click to collapse
now its look good
i flashed recovery and boot from this fresh downloaded rom
its stock 3 android 4.0.3
wowwwwwwwwww
can now upgrade to jelly bean?
i checked ota update but is not available from phone,
lukers said:
now its look good
i flashed recovery and boot from this fresh downloaded rom
its stock 3 android 4.0.3
wowwwwwwwwww
can now upgrade to jelly bean?
i checked ota update but is not available from phone,
Click to expand...
Click to collapse
Yeah you should be able to update the phone, try to check a couple of times manually for ota's.
Related
my phone died.....
When I see a new recovery,i flashed it in my one x.But failed.
I use fastboot flash recovery recovery123.img (i changed the name to recovery123.img)But the screen show,
sending 'recovery' (5452 MB) ... OKAY (6.973s)
writing 'recovery' ... INFOFormat SOS done
OKAY
I tried it many many times already but still fail
Flash your RUU via fastboot to get back to stock (relock the bootloader first)
EddyOS said:
Flash your RUU via fastboot to get back to stock (relock the bootloader first)
Click to expand...
Click to collapse
The RUU can't verify my phone already on fastboot usb mode
1) Flash stock recovery:
Grab it from here: http://forum.xda-developers.com/showthread.php?t=1579797
Then Boot in bootloader >> Fastboot and issue the following command (assuming that the offical recovery is named recovery.img): fastboot flash recovery recovery.img
2) Relock Bootloader:
Boot in bootloader >> Fastboot and issue the following command: fastboot oem lock
3) Find and run/flash the RUU for your device, find it here: http://forum.xda-developers.com/showthread.php?t=1543604
Courtesy of DaDoctor
Mod or Die
Mod or Die
snowwhite007 said:
1) Flash stock recovery:
Grab it from here: http://forum.xda-developers.com/showthread.php?t=1579797
Then Boot in bootloader >> Fastboot and issue the following command (assuming that the offical recovery is named recovery.img): fastboot flash recovery recovery.img
2) Relock Bootloader:
Boot in bootloader >> Fastboot and issue the following command: fastboot oem lock
3) Find and run/flash the RUU for your device, find it here: http://forum.xda-developers.com/showthread.php?t=1543604
Courtesy of DaDoctor
Mod or Die
Mod or Die
Click to expand...
Click to collapse
My phone can't flash anything via fastboot
sending 'recovery' (5452 MB) ... OKAY (6.973s)
writing 'recovery' ... INFOFormat SOS done
OKAY = DONE AND WORKING
and you can allways flash from fastboot..
have you got all files ?
fastboot.exe
adb.exe
AdbWinApi.dll
I've been trying to update my HOX to JB since yesterday but to no avail:
Im on everything stock (ROM, Recovery etc) and phone is un-rooted. I relocked the bootloader too. but when the update downloads and the phone restarts after a few while, a red triangle with exclamation marks appear and phone restarts.
I've tried to do this 3 times now with no avail.
alternately i've been trying to follow this and when i reach the flashing firmware part, it fails after 2 tries and after the 3rd it just stucks:
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (12875 KB)...
OKAY [ 1.683s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 1.886s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (12875 KB)...
FAILED (remote: (00000008))
finished. total time: 0.001s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (12875 KB)...
after 3rd attempt it just stays in sending 'zip' state
anyone got a clue how i can solve either problem?! :/
note my camera app is a modified version. rest all ROM is stock. could this be the issue?! if so, then any way to resolve this other than RUU method?
The last method you tried will not work if the bootloader is still locked !
The red triangle is normally an indication that you do not have the stock recovery. Try to reflash recovery and then fastboot erase cache before trying again, You would need to unlock bootloader in order to fastboot flash recovery. As pointed out in my other reply to you, you would probably need to revert to the stock camera app as well.
Using the fastboot flash zip method, you need to have a locked bootloader and then enter command fastboot oem rebootRUU before running the fastboot flash zip command.
Ah like that ! Thanks clyde :thumbup:
I did not read carefully... was kinda busy with my mac & cheese !!!
MarcelHofs said:
Ah like that ! Thanks clyde :thumbup:
I did not read carefully... was kinda busy with my mac & cheese !!!
Click to expand...
Click to collapse
ClydeB1 said:
Click to expand...
Click to collapse
LOL !
ClydeB1 said:
The red triangle is normally an indication that you do not have the stock recovery. Try to reflash recovery and then fastboot erase cache before trying again, You would need to unlock bootloader in order to fastboot flash recovery. As pointed out in my other reply to you, you would probably need to revert to the stock camera app as well.
Using the fastboot flash zip method, you need to have a locked bootloader and then enter command fastboot oem rebootRUU before running the fastboot flash zip command.
Click to expand...
Click to collapse
thanks, will try the OTA method 1st by installing the RUU. if that works then brilliant! otherwise try the 2nd
ClydeB1 said:
Using the fastboot flash zip method, you need to have a locked bootloader and then enter command fastboot oem rebootRUU before running the fastboot flash zip command.
Click to expand...
Click to collapse
worked like a charm, thnx mate! :good:
Didnt work for me
Asad_612 said:
worked like a charm, thnx mate! :good:
Click to expand...
Click to collapse
I get to the rebootRUU step and that works, but when I try to flash the firmware.zip it always comes up with "error: cannot load "fastboot.zip" : Unknown error" do you know what the problem might be?
mewazhere said:
I get to the rebootRUU step and that works, but when I try to flash the firmware.zip it always comes up with "error: cannot load "fastboot.zip" : Unknown error" do you know what the problem might be?
Click to expand...
Click to collapse
Fastboot.zip ..... Yeah that's wrong
Fastboot flash zip firmware.zip
And the firmware file need to be named firmware.zip !
Hi guys,
i never posted but i use this forum as my main reference when comes to roms, flashing etc.
So i will use this post also to say a big THANKS
Here is the problem:
i was trying to upgrade my Cyanogen from the 10 to the v 10.1 (JB 4.2.x) but the classic way flash boot.img and then the rom didn't worked; i get everytime a error getprop("ro.bootloader") == ............... when i try to write the rom, i think that is a problem of the bootloader version (0.95).
Then i tried to flash the version 1.39 with the CID VODAP102 but also here i get this error:
Code:
< waiting for device >
sending 'zip' (12876 KB)... OKAY [ 1.578s]
writing 'zip'... INFOadopting the signature contained in this image...
FAILED (remote: 99 unknown fail)
finished. total time: 2.197s
U:\Users\Exico\Desktop\Nuova cartella\Fastboot\Fastboot>fastboot flash zip firmware.zip
sending 'zip' (12876 KB)... FAILED (remote: (00030003))
finished. total time: 0.001s
Then if i try again it remain blocked in " sending 'zip' (12876 KB)... "
I tried with locked and unlocked but same issue.
I saw somewhere that i cannot go directly from my version that i stoo old to this one so i was looking for a older version but unfortunately htcruu closed and im stucked.
Now Im running my nandroid backup so i can use the phone but i can try everything.
I think that the crucial point is to update the bootloader to version 1.3x, then the rom flashing will be easy.
Thanks in advance!
What's your version main number ?
Fastboot getvar version-main
Mr Hofs said:
What's your version main number ?
Fastboot getvar version-main
Click to expand...
Click to collapse
Result:
Code:
version-main: 1.29.161.13
finished. total time: 0.006s
Here you go
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_264070_signed.exe
So i have to:
1. Flash this rom;
2. Lock the phone
3. Flash the new bootloader
4. Unlock the phone
5. Flash the new cyanogen
Right?
I will try tomorrow, for now thanks
Ill let you know if everything goes well
1: charge the battery full
2: lock the bootloader
3: run the ruu with admin right (right click the ruu)
4: update the phone all the way (manual check)
5: unlock the bootloader
6: flash the custom recovery
7: MAKE A NANDROID BACKUP !
8: install a new rom
Mr Hofs said:
1: charge the battery full
2: lock the bootloader
3: run the ruu with admin right (right click the ruu)
4: update the phone all the way (manual check)
5: unlock the bootloader
6: flash the custom recovery
7: MAKE A NANDROID BACKUP !
8: install a new rom
Click to expand...
Click to collapse
1: charge the battery full - DONE
2: lock the bootloader - DONE
3: run the ruu with admin right (right click the ruu) - Here fails
4: update the phone all the way (manual check)
5: unlock the bootloader
6: flash the custom recovery
7: MAKE A NANDROID BACKUP !
8: install a new rom
I get the error 155: (i translate from italian)
Error[155]: Error updating image
The romm utility cannot update Android
Get the right ROM utility and retry
-------------
I tried to lock/unlock the bootloader, flash manually boot and recovery and use a stock rom nandroid backup but still nothing
Well it should, it matches 100%. What is the outcome of
Fastboot oem readcid
And what firmware did you download ?
Mr Hofs said:
Well it should, it matches 100%. What is the outcome of
Fastboot oem readcid
And what firmware did you download ?
Click to expand...
Click to collapse
Im done somewhat.
Thats what i did so far:
1. Flashed the old backup and updated it, hboot still the same
2. Flashed the RUU, hboot still the same
3. Tried to flash again and again the new hboot 1.39 that i found in a list thread in the rom section, success
4. Tried to flash back my Cyanogen 10 backup, done but does not boot
5. Wiping the phone with CWM but this time it wiped also my "sdcard" and i was with low battery and no rom
6. Found a trick to how charge the phone and then i flashed TWRP to gain access to the usb mount and i loaded Cyanogen 10.1 + gapps
7. Flashed with TWRP the rom and gapps and then flashed back CWM
A bit long but i did it! : P now that i have the newer boot loader i cannot use anymore the cyanogen 10, it remain blocked in the cyanogen logo.
Thanks for the support!
How to I update my hboot from 0.94 to 1.36?
I've tried but it wont update - my CID is HTC_44 (or 044) - i've checked and it has OTA update but I'm not sure how to do all the hboot updating thing.
Mikeshashimi said:
How to I update my hboot from 0.94 to 1.36?
I've tried but it wont update - my CID is HTC_44 (or 044) - i've checked and it has OTA update but I'm not sure how to do all the hboot updating thing.
Click to expand...
Click to collapse
You can try a RUU, you have a unbranded handset so my guess your ruu is out there....
Fastboot getvar version-main
any one can help me to get my phone to stoke ????
i am new in this so pleas help me step by step
thank you
oneabdo said:
any one can help me to get my phone to stoke ????
i am new in this so pleas help me step by step
thank you
Click to expand...
Click to collapse
Here, This should help you
http://forum.xda-developers.com/showthread.php?t=1592355
oneabdo said:
any one can help me to get my phone to stoke ????
i am new in this so pleas help me step by step
thank you
Click to expand...
Click to collapse
Post the result of "fastboot getvar version-main" just to be sure about the base...
vipul0309 said:
Here, This should help you
http://forum.xda-developers.com/showthread.php?t=1592355
Click to expand...
Click to collapse
He wants to get back to stock, not install a Custom ROM...
Oops mistake
Sent from my HTC One X
---------- Post added at 03:30 PM ---------- Previous post was at 03:24 PM ----------
http://forum.xda-developers.com/showthread.php?t=1832891
Scroll down to reverting to stock and you shall find it
my htc spftwer number is 2.18.751.7
i have been try RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.20_Radio_5.1204.162.29_release_292865_signed.exe
and it give me error 159
oneabdo said:
my htc spftwer number is 2.18.751.7
i have been try RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.20_Radio_5.1204.162.29_release_292865_signed.exe
and it give me error 159
Click to expand...
Click to collapse
I'm not talking about the software number of bootloader...
Do as I told and post the result of
Code:
fastboot getvar version-main
Then we can find a correct RUU for your device or a nandroid backup!
vin4yak said:
I'm not talking about the software number of bootloader...
Do as I told and post the result of
Code:
fastboot getvar version-main
Then we can find a correct RUU for your device or a nandroid backup!
Click to expand...
Click to collapse
version-main: 2.18.751.7
oneabdo said:
version-main: 2.18.751.7
Click to expand...
Click to collapse
Ohk! Your CID is CID HTC__621??
Cross check by doing this command:
Code:
fastboot getvar cid
Post back result... I think you will need to first upgrade your firmware and then restore the a nandroid backup...
There's no RUU available for you, can't find a nandroid backup as well...
vin4yak said:
Ohk! Your CID is CID HTC__621??
Cross check by doing this command:
Code:
fastboot getvar cid
Post back result... I think you will need to first upgrade your firmware and then restore the a nandroid backup...
There's no RUU available for you, can't find a nandroid backup as well...
Click to expand...
Click to collapse
yes my cid is 621
how to upgrade my firmware and then restore the a nandroid backup??
thank you
Download this firmware : http://www.androidrevolution.nl/downloader/download.php?file=3.14.709.20.zip and then rename it to firmware.zip and put it in your
relock your bootloader by:
Code:
fastboot oem lock
Now flash the zip:
Code:
fastboot flash zip firmware.zip
You might have to do it a few times to get it successfully!
vin4yak said:
Download this firmware : http://www.androidrevolution.nl/downloader/download.php?file=3.14.709.20.zip and then rename it to firmware.zip and put it in your
relock your bootloader by:
Code:
fastboot oem lock
Now flash the zip:
Code:
fastboot flash zip firmware.zip
You might have to do it a few times to get it successfully!
Click to expand...
Click to collapse
i have this
error: cannot load 'firmware.zip'
oneabdo said:
i have this
error: cannot load 'firmware.zip'
Click to expand...
Click to collapse
Have you put the firmware.zip into fastboot folder? is your phone in fastboot USB mode while connection to PC and running the command??
vin4yak said:
Have you put the firmware.zip into fastboot folder? is your phone in fastboot USB mode while connection to PC and running the command??
Click to expand...
Click to collapse
yes i put it on computer folder of fastboot folder and my phone it was relocked and in fastboot usb mode
oneabdo said:
yes i put it on computer folder of fastboot folder and my phone it was relocked and in fastboot usb mode
Click to expand...
Click to collapse
Ohkk Go to fastboot mode and then run the following command:
Code:
fastboot oem rebootRUU
and then run this:
fastboot flash zip firmware.zip
Flash it 2-3 times until you get a successful message!
vin4yak said:
Ohkk Go to fastboot mode and then run the following command:
Code:
fastboot oem rebootRUU
and then run this:
fastboot flash zip firmware.zip
Flash it 2-3 times until you get a successful message!
Click to expand...
Click to collapse
is it take long time ???
now sending !!!
oneabdo said:
is it take long time ???
now sending !!!
Click to expand...
Click to collapse
Didn't get you... what sending?
When you do rebootRUU, it will take you to Black HTC Screen... wait for few seconds and then flash the firmware.zip...
if you get an error,, then again flash the firmware zip 2-3 times till you get a successful message...
vin4yak said:
Didn't get you... what sending?
When you do rebootRUU, it will take you to Black HTC Screen... wait for few seconds and then flash the firmware.zip...
if you get an error,, then again flash the firmware zip 2-3 times till you get a successful message...
Click to expand...
Click to collapse
it dostn work it stay in sending 'zip' (12869 KB)...
oneabdo said:
it dostn work it stay in sending 'zip' (12869 KB)...
Click to expand...
Click to collapse
It means connection is lost between the phone and PC...
using latest HTC Sync manager and SDK?
Download this fastboot folder and try again : http://d-h.st/8Jr
Make sure you have sufficient amount of battery as well.
vin4yak said:
It means connection is lost between the phone and PC...
using latest HTC Sync manager and SDK?
Download this fastboot folder and try again : http://d-h.st/8Jr
Make sure you have sufficient amount of battery as well.
Click to expand...
Click to collapse
this is what i got
...
(bootloader) Save data from original MSC...
(bootloader) Save data from SIF...
(bootloader) Update partition data to SIF partition
(bootloader) Update partition data from original MSC...
(bootloader) [MSG] OKAY
OKAY [ 0.221s]
finished. total time: 0.221s
C:\Users\abdourrahem\Desktop\fastboot_2\fastboot>fastboot flash zip firmware.zi
sending 'zip' (12869 KB)...
OKAY [ 1.672s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
FAILED (remote: 99 unknown fail)
finished. total time: 2.294s
C:\Users\abdourrahem\Desktop\fastboot_2\fastboot>fastboot flash zip firmware.zi
sending 'zip' (12869 KB)...
FAILED (remote: (00030003))
finished. total time: 0.002s
C:\Users\abdourrahem\Desktop\fastboot_2\fastboot>fastboot flash zip firmware.zi
sending 'zip' (12869 KB)...
Edit : wrong thread !
Edit :
I see everywhere you write fasboot flash zip firmware.zi
Its firmware.zip
Don't know if you typed it wrong here or on the pc
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Get a brand new one via the HTC dev site and try again. But why on earth did you relock it to begin with ?
Mr Hofs said:
Get a brand new one via the HTC dev site and try again. But why on earth did you relock it to begin with ?
Click to expand...
Click to collapse
I followed some "back to stock" guide (from h t t p s://w w w.youtube.com/watch?v=SZuAjz4PIjU) for HOX that included installing a stock recovery and relocking the phone. However, I couldn't find the correct RUU. I tried using a new unlock token from HTCdev but obviously it didn't work as it's identical. Thanks for the help though!
Lesson learned....never do something before you gathered all the files needed !
Are you flashing the token correctly, is the phone connected to the pc on a usb 2.0 port (not a usb hub or other in between connection) ?
You were unlocked, what does the bootloader say now ?
Locked or relocked ?
Mr Hofs said:
Lesson learned....never do something before you gathered all the files needed !
Are you flashing the token correctly, is the phone connected to the pc on a usb 2.0 port (not a usb hub or other in between connection) ?
You were unlocked, what does the bootloader say now ?
Locked or relocked ?
Click to expand...
Click to collapse
The phone is connected directly to the USB and it is Relocked, occassionally showing the "security warning" under it. I downloaded the correct nandroid backup for the phone, but as I don't have a custom recovery I'm not able to use it. I tried to flash a stock recovery (again) but I keep getting the same "FAILED (remote: not allowed)" whenever I try to do any changes to the phone.
Why it is btw that we can't have a RUU for a certain version? No way to downgrade ?
S-on devices cant downgrade,only s-off devices can. But you need to find a shop that can offer that specific service, can't do it in anyway at home.
But i see you flash the unlock code from a specific folder. Try it like this :
Open the command prompt directly from the fastboot.exe folder and place the unlock code.bin file in that specific directory too ! Then perform the unlock fastboot command again
Mr Hofs said:
Open the command prompt directly from the fastboot.exe folder and place the unlock code.bin file in that specific directory too ! Then perform the unlock fastboot command again
Click to expand...
Click to collapse
Unfortunately that didn't work. It seems there's not much I can do now.
you did fastboot flash unlocktocken instead of fastboot flash unlocktoken.
trying to flash to a non existing partition gives this error.
I had same problem when I did fastboot flash unlock instead of unlocktoken
so unlock with ck and token without ck
jjgittes said:
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Click to expand...
Click to collapse
man all credits goes to @vastloper and next time it will be good to copy the command from the HTCdev site not to write it manually use the right command
@vastloper it will be good to quote him to see your comment. when you quote him he will receive the notification and will see his mistake with sure:good:
vastloper said:
you did fastboot flash unlocktocken instead of fastboot flash unlocktoken.
trying to flash to a non existing partition gives this error.
I had same problem when I did fastboot flash unlock instead of unlocktoken
so unlock with ck and token without ck
Click to expand...
Click to collapse
Thanks a lot! :victory: I did indeed make a typo on that, and used the same command over and over again without rewriting it.
I was able unlock and recover back to stock. However, I'm not still able to use my phone due to the blank/black screen issue, and will be further investigating that.
Does anyone have a O2__001 CID Stock Rom??
jjgittes said:
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Click to expand...
Click to collapse
Are you have battery take new unlocktoken and try again