[Q] flashing problem - Xperia Play Q&A, Help & Troubleshooting

hi
i flashed jb rom and it worked but when i wanted to flash another rom it shows me the same error (status 7)
i tried to flash the stock GB one but it doesnt boot
so my Q are:
1)do i have to flash GB firmware first
2)do i have to flash a GB kernal before flashing GB firmware or the turbo kernal v2.1 works??
i need a realyy fast help :crying::crying::crying::crying::crying::crying:

rashad543 said:
hi
i flashed jb rom and it worked but when i wanted to flash another rom it shows me the same error (status 7)
i tried to flash the stock GB one but it doesnt boot
so my Q are:
1)do i have to flash GB firmware first
2)do i have to flash a GB kernal before flashing GB firmware or the turbo kernal v2.1 works??
i need a realyy fast help :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Well you could always ftf to stock and just root and try again this will help with conflicts of old files and kernels and you can start fresh
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™

crazymonkey05 said:
Well you could always ftf to stock and just root and try again this will help with conflicts of old files and kernels and you can start fresh
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
thnx alot
could u give me a working ftf for play r800i pleaaaaaaaase i tried one and it didnt work

here is a really good walkthrough by fma to do it...hope it helps and here is another guide to help you with any other flashing/moding questions you might have.
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™

[Q] Need a good Kernel and Rom for xperia 800x
rashad543 said:
hi
i flashed jb rom and it worked but when i wanted to flash another rom it shows me the same error (status 7)
i tried to flash the stock GB one but it doesnt boot
so my Q are:
1)do i have to flash GB firmware first
2)do i have to flash a GB kernal before flashing GB firmware or the turbo kernal v2.1 works??
i need a realyy fast help :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
CM9.1 ZEUSC For r800x cdma has the kernel &CWM in it!!!! along with the rom !!so read below
Simple fix is stay away from JB roms they are still too new so you are going to run in to many bugs..etc Besides alot of people here treat the 800x like its a red headed step child here.
lucky for you i have bricked my phone many times and brought it back from the grave.
Step 1 is you bootloader unlocked? If yes. it doesnt matter what rom you have on it now. because you can do what you please with it.
Step 2 are you using flash tool? if yes flash Kernels first before flashing a rom
A good rom i recommend is Zeusc CM9.1 still has bugs but it is stable.
download it here Google get.cm then click Zeusc cm 9.1 is the latest stable release. also download Gapps Signed for Ics 4.04 Because you will need to put it on you SD card later along with the CM9.1 zip.
Step 3 download it and extract the boot.img file from it and then put a copy of the zip intact on your SD card. put your phone in USB MODE TO DO SO..
Step 4 open up flash tool . if you dont have it google "flash tool androxide".. it should be on Cnet make sure its the newest version...
Step 5 power your phone off... Go to my computer then C: drive look for flashtool click on drivers and install them for your phone. along with fast boot and flash mode... 3 total boxes to check... once installed move to step six
Step 6 plug you phone in VIA USB CORD while HOLDING THE SEARCH BUTTON . IF YOU DID IT RIGHT YOU SHOULD SEE A BLUE LIGHT.
Step 7 look at the logbox of flash tool is should say it detected your phone and display info. Click the LIGHTNING BOLT ICON( Flash Button)
then select fastboot mode.
next click "select Kernel to flash" button then select the boot.img file you extracted from the zip folder. earlier in step 3
if you did it correct it will flash the boot image to you phone along with the CWM recovery to you bootloader. once it says sucessful.
unplug your phone. hold the power button to reboot it when you see the free xperia logo come on hold the volume down button. till it goes in to recovery mode.
step 8 erase your "partitons" and "cache" then select "advanced" clean your "dalvik cache" too. next select install from zip folder then select the zip you want to flash. its the file that says cm9.1 zeusc. the file i told you to put on your SD card.
install it to your phone!!!! after that do not reboot until you flash the google apps zip on you sd card the same way you did the rom..
THEN ONCE YOU INSTALLED BOTH REBOOT YOUR PHONE FROM CWM RECOVERY BY SELECTING REBOOT FROM THE MENU.
NOW YOU SHOULD HAVE A FULLY WORKING ROM ON YOUR 800X
dONT FORGET TO THANK ME !!!

Related

[Q] Xperia arc - stuck in Boot Loop issue - Please Help

Hey Guyz,
i unlocked by bootloader using fast boot method
then i rooted my phone using the same method and it was working fine.
Yesterday i installed CW rom and CWM autoinstaller , to reboot in recovery and installed a mod to bring reboot in Power Off menu options.. it intalled correctly.
But when i rebooted the phone, the sony ericcson logo appears again and again.. i.e it is stuck in boot loop.. m still able to enter in recovery but unable to boot my phone properly..
Please Help...
The First solution is to flash a stock firmware using flashtool.
But which Kernel and which Rom have you tried to flash?
Sent from my iPad using Tapatalk HD
k.. i'l try to flash 4.0.a.283 using fastboot..
BTW
I am noob.. Dont know anything about anything about kernel.. all i did was install Clock work rom.. When i opened it, it said, "you need to install CWM". So i installled CWM autoinstaller...
Now with everything installed, i booted into recovery and installed a mod ( which brings the option to reboot in Power Off menu). It installed correctly... Then i clicked on reboot system now.. That is when i realized that m stuck in boot loop..
hysenkoshy said:
k.. i'l try to flash 4.0.a.283 using fastboot..
BTW
I am noob.. Dont know anything about anything about kernel.. all i did was install Clock work rom.. When i opened it, it said, "you need to install CWM". So i installled CWM autoinstaller...
Now with everything installed, i booted into recovery and installed a mod ( which brings the option to reboot in Power Off menu). It installed correctly... Then i clicked on reboot system now.. That is when i realized that m stuck in boot loop..
Click to expand...
Click to collapse
You must first check the compatibilty of "reboot mod" with the firmware version you use.
Just check the firmware you have in your phone and make sure it matches with the firmware on which the mod is based.
@wayne
I have flashed my phone using fastboot method just like i did it when i was rooting my phone. And Thank GOD it is working fine now..
@KingWecked,
M still trying to figure out, where did i go wrong at the first place...
was it the CWM auto installer ??
or was it the Reboot mod ?? coz i downloaded the mod for xperia arc only..
Do we need to change that kernel thing after rooting ??
I don't know what the hell is a kernel; and after rooting i haven't done anything with my kernel. Should i ???
A kernel is the base of what Android runs
Sent from my iPad 2 using Tapatalk
hysenkoshy said:
M still trying to figure out, where did i go wrong at the first place...
was it the CWM auto installer ??
or was it the Reboot mod ?? coz i downloaded the mod for xperia arc only..
Do we need to change that kernel thing after rooting ??
I don't know what the hell is a kernel; and after rooting i haven't done anything with my kernel. Should i ???
Click to expand...
Click to collapse
Before you install any mod,you must first check the firmware version you are using.You can find it out from Settings-->About Phone-->Build Number.
It contains the firmware version on which your phone is running Ex:4.0.a.283
.283 is the old version firmware and most of the mods dont work on this firmware.You must flash the latest firmware .42 in order to support the majority of the mods and themes available in this forum
And a kernel is very complicated thing.you must not mess with it unless you know what you are doing.Manipulating your kernel might brick your phone permanently.And if you want to know much further about kernels then search the forum and you must find loads of threads explaining about kernels and stuff related with it
@ KingWickedd
are u sure .283 is an old firmware
Coz initially i had "unrooted .62"
For rooting purpose i downloaded this firmware..
So can U please tell me where can i get " rooted 0.42 firmware" where i can start installing all mods right away..
Note: Multiupload links are not working ... Any other links ????
hysenkoshy said:
@ KingWickedd
are u sure .283 is an old firmware
Coz initially i had "unrooted .62"
For rooting purpose i downloaded this firmware..
So can U please tell me where can i get " rooted 0.42 firmware" where i can start installing all mods right away..
Note: Multiupload links are not working ... Any other links ????
Click to expand...
Click to collapse
Yes I am sure its the old version where as .42/.62/.69 are the latest firmware versions.They have almost everything in common and they differ based on the regions they are released in.
For rooted .42 firmware..follow this link below..
http://forum.xda-developers.com/showthread.php?t=1330314
Boot looooop
I am facing the same problem but the solutions given in here doesn't seem to work..please help me.
I had .42 rooted on my XPERIA ARC, unlocked bootloader.
Installed Cyanogenmod Stable version and flashed its boot.img.
Wiped the cache n data.
Installed the zip file after going into recovery mode but phone is stuck in BOOTLOOP...
When i try re-flashing .42 generic firmware using flashtool, PC hangs and i need to restart
Please help me out guys...
You need to flash kernel toooo
From my sexy LT15i
amulbaby said:
I am facing the same problem but the solutions given in here doesn't seem to work..please help me.
I had .42 rooted on my XPERIA ARC, unlocked bootloader.
Installed Cyanogenmod Stable version and flashed its boot.img.
Wiped the cache n data.
Installed the zip file after going into recovery mode but phone is stuck in BOOTLOOP...
When i try re-flashing .42 generic firmware using flashtool, PC hangs and i need to restart
Please help me out guys...
Click to expand...
Click to collapse
Don't worry...first start PC in safe mode first and then connect mobile in faatboot mode and wait for minute.. driver will install automatically..then restart PC in normal..then flash kernal in fast boot mode with recovery inbuilt..then flash rom.. it work for me in past..
Sent from my Xperia Arc using xda premium
hEY GUYS,
Thanks a lot...
What i did was...Flashed the kernal again...
Wiped Dalvik Cache...Rebooted into recovery...
Wiped Data n Cache partition...rebooted
And then re-installed the zip from SD card...
But now i wanna have a help reg. restoring of nandroid backup....
I had taken a nandroid backup using CWM Auto-installer...
But now I wanna know how can i restore my apps that i had with Stock ROM...i tried a advanced backup on /data alone but then, its not booting up if i do so...
Please help..

[Q] help with xperia sl and pacman

hello
sorry for bad english
will i've follow the steps to install pacman ROM on my sl
" nozomi_PAC_JB_4.2.2-v20.1.0_Themed v2 "
now i wont to install " XZXperience_2_3 "
i've downloaded it and copy the zip file to sdcard ,, open recovery mode in CWM and install it
the problem that when i started the phone the pacman logo appers and after that give me black screen and nothain happen
tried also the stock 6.a.2.55 as zip in the same way and give me the same thing
help plzzzzzzzzz
what can i do to restore my phone ?!?!?!?!!
Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk
now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy
Ben36 said:
Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
Speka-3- said:
now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy
Click to expand...
Click to collapse
thank you both
i've soved it myself
with flash tool
flash the orgnial ICS .55 and install recovery ics14.elf by fastboot and the installed the ROM
thanks ^_^
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
1. Open zip file and copy boot.img to fastboot folder
2. Right click and select " Open cmd here" (Win7)
3. Type these commands
- fastboot flash boot boot.img (Wait when its done after few sec)
- fastboot reboot ( or unplug the cable and turn on your phone)
4. Now, boot into CWM to flash Rom
Take notice that you have to install fastboot driver first. Good luck :fingers-crossed:
Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
if you have a CWM Recovery in your kernel(like FXP's CM9 or CM10 kernel)
just copy the zip(you download from the PAC thread) to the internal storage
then boot into CWM, wipe,flash the zip,enjoy
recovery will flash boot.img automatically
if no work, try flash the boot.img manually, like the way on 6# reply
Lilude & Speca, thank you both for a quick reply, btw, your English is perfect.
Wow! So a different kernel can be flashed with the rest of the packet from recovery/cwm without needing a pc, (except for copying to sd card) .
A new bit of knowledge for me!
I'd click your thanks buttons if I knew how, but as you can see I'm new to the forum & still finding my way about.
Noobs of the world unite.
Both ways are fine but better flash separately in such situation. It definitely helps you avoid a broken CWM happening after that such as : can't backup the current Rom, can't mount system as well as can't flash anything, etc.. aside from having to reflash Stock Rom,otherwise the phone gonna get stuck on boot . How terrible !
Make your choice and do not mess up your phone, huh ?
Sent from my Xperia S using Tapatalk 2
If you say flashing the boot.img from my pc first is the safest option then I'll use that method.
I've already messed up several times when I was in stock, without a recovery, luckily EMMA came to the rescue.
Since custom rom cm10 I can't flash updates or anything else without a factory reset, partition & dalvic wipe is never enough.
So taking my time for this rom, download tonight, fingers crossed
______
Xperia s : fxp 212 nozomi
++++++++++++++++++
OK!
flashed boot.img
wiped everything
fixed permissions
mounted system
flashed PAC
rebooted
went back to recovery
flashed gapps
rebooted.
Works perfectly so far!
also I reinstalled my own apps manually instead of using titanium back up. I read this hint in the PAC v22 thread / dev section.
maybe this is 1 of the reasons I'm not having the odd problem that a few others are experiencing. who knows?
thanx all for helping
......................
Xperia S : PAC v22

Stuck at CM9.1 animation after flashing Xperia S

Hi !
I have a locked A.55 Xperia S from Dubai and were trying to install CM9.1 (stable) but now, its stuck at the Cyanogenmod animation. I waited for like 10 minutes but it just won't go from there. Re-flashing the kernal and wiping and then re-installing CM9.1 didn't work.
What I did:
1. Installed the drivers from Google dev website with fastmode driver from Sony dev site.
Selected the ADB mode driver (not the bootloader driver) for the S1boot device in Device Manager.
2. Rooted using Easy Root 1.2 (chinese version)
(success, I could see superuser process in the apps)
3. Unlocked bootloader using the fastmode as mentioned in Sony's website.
4. Downloaded the CM9.1 nozomi from CM website and Gapps from another website and copied to the root of the internal memory (Xperia doesn't have memory card ?)
5. Installed CWM recovery (6.0.3 ?) using Recover X
6. Flashed CM kernal from the CM9.1 nozomi zip (boot.img) using flashtool 0.9.11
7. Backed up the existing data using CWM.
8. Flashed CM9.1 nozomi using CWM and then Gapps. Factory reset and Cache clear.
9. Stuck at FreeXperia logo
10. Gone to CWM and restored the backup but it gave an error with "can't format with mkextf4 /dev/block/mmcblk3322 (or something like that)
11. Stuck at XPERIA logo (animation)
12. Installed the CM9.1 and Gapps and then factory reset, cache reset and Dalvik cache clear (when I press on "clear Dalvik Cache", I don't see any message in the log btw)
13. Stuck at CM9.1 Robot animation (the matrix ?)
Please help guys...its my only phone and I'm a busy guy regarding phone calls and emails
Thanks for reading
Does flashing a different kernal a good idea ?
Where did you download your cm? FXP or CM official website? You can fix it by flashing stock firmware using flashtool.
AndroidNoob69 said:
Where did you download your cm? FXP or CM official website? You can fix it by flashing stock firmware using flashtool.
Click to expand...
Click to collapse
Yeah, CM official website !
So, should I just download the stock firmware.zip and flash it with recovery or I have to download the .ftf file ?
I flashed the Pure ICS kernal but its stuck at the "Pure ICS kernal" logo.
What should I do now ?
Download the stock firmware ftf and flash it ?
From where I can get the kernal for the stock firmware?
Thanks bro for the reply !
x.marX said:
Yeah, CM official website !
So, should I just download the stock firmware.zip and flash it with recovery or I have to download the .ftf file ?
I flashed the Pure ICS kernal but its stuck at the "Pure ICS kernal" logo.
What should I do now ?
Download the stock firmware ftf and flash it ?
From where I can get the kernal for the stock firmware?
Thanks bro for the reply !
Click to expand...
Click to collapse
The stock ftf includes kernel so don't worry. Flash the stock ftf and report the results.
AndroidNoob69 said:
The stock ftf includes kernel so don't worry. Flash the stock ftf and report the results.
Click to expand...
Click to collapse
Copy that !
But, what to do after that ?
I mean, I wanted to run the CM 9.1 for increased battery backup...what do I do now ?
x.marX said:
But, what to do after that ?
I mean, I wanted to run the CM 9.1 for increased battery backup...what do I do now ?
Click to expand...
Click to collapse
Flash, root, redownload the rom and stock cm kernel, and try again.
AndroidNoob69 said:
Flash, root, redownload the rom and stock cm kernel, and try again.
Click to expand...
Click to collapse
I have checked the md5 sum...which matches with that in the CM website.
Is there any other ROM with good battery backup ?
Man ! I hate this
I have installed the drivers from the driver folder in the flashtool but when I connect my mobile in flashmode (green led), the add hardware wizard pops up and within 2 seconds, the phone boots up freezing the system.
The flashtool displays an error saying "install drivers".
I have installed all drivers using flashtool's driver installer but why does it still say its not installed ?
Are you using windows 8?
You have a locked bootloader?... CM9 won't work on a locked bootloader
Sent from my LT26i using xda app-developers app
amey_gangal said:
You have a locked bootloader?... CM9 won't work on a locked bootloader
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Its unlocked
AndroidNoob69 said:
Are you using windows 8?
Click to expand...
Click to collapse
No, windows XP
AndroidNoob69 said:
Its unlocked
Click to expand...
Click to collapse
Yup !
BTW, I tried another system with more updated Windows where I could install the driver using hardware wizard successfully but the flashtool gives an another error now and the phone boots up.
Didn't note the error down...gonna do it again to see what it says !
EDIT:
Can I use fastboot mode instead of flash mode in the flashtool ?
Now, it doesn't even recognize the phone....I mean, even if I connect it in flash mode (green led), the flashtool doesn't start the flashing
EDIT:
Is there any way I could access its memory ?
I'm thinking about downloading a stock ROM and kernal and flash it using CWM.
A miracle has happened!!
I could flash the firmware successfully., thanks JZ
Now I'm wondering whether I should go ahead and flash the cm9.1 again!!

[Q] Can't put CWM onto my Xperia Arc after using EMMA

Hi,
I have tried everything I've read so far and I still can't get the phone to boot into recovery.
I flashed the latest Stock ROM using Sony Ericsson 'Emma' flashtool.
Then I rooted using eroot and I have confirmed the root with the app Root Checker.
I installed ROM Manager but it says my device isn't recognised.
Also installed X-Parts and even though that said ClockWorkMod install was successful it still won't boot into recovery.
I have tried holding down various combination of keys whilst powering up but I don't even see a blue light appearing.
Is there any way to get CWM onto my Xperia Arc (LT15i) please?
Thanks for any advice
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
popthosegaskets said:
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
GoodGosh said:
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
Click to expand...
Click to collapse
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
popthosegaskets said:
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
GoodGosh said:
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
Click to expand...
Click to collapse
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
iggy1974 said:
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
Click to expand...
Click to collapse
僕のLT18iから送られてきた
Solved boot in CWM
popthosegaskets said:
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I've found solutions for LT18i
downloaded kernel
http://goo.im/devs/nAa/kernels/3.4.x/jb/anzu/3.4.45-nAa-03_LT18.img

installing super jelly bean

So im not quite fammiliar with xperia devices but im trying to install the latest sjb rom, i dont get the part to flash the kernal before flashing the cwm recovery and the rom. I download fusion kernel v5.5 but i get a .img file, the flashtool wants a.sin file(when i tryto use "select kernal to flash"). I tried to do a full wipe, then flashing sbj trough cwm recovery but it just goes into a bootloop. Flashed 0.537 firmare to get it to normal status again. bootloader is unlocked,atleast it said "bootloader unlocked allowed=yes" in phone info.
1. Did you set Flashtool to fastboot mode?
2. Is the kernel compatible with the ROM?
僕のLT18iから送られてきた
its this rom http://forum.xda-developers.com/showthread.php?t=2134257&highlight=recovery
i dont understand step number 2
0.Only for unlocked bootlader
1. Copy super jelly bean and gapps to sd card
2. Flash any jb kernel for neov via fastboot.. i recommend fusion kernel 5.4 (present inside the zip file )
3.[OPTIONAL] flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.Perform Full Wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6.Flash Super Jelly Bean Rom
8.Flash the patch for your respective devices.
7.Flash gapps , Provided in download page
8.Boot
9.Let the rom settle for 15 to 20 minutes
10.Reboot at least once in 2 days
11.Enjoy
pitastrudl said:
its this rom http://forum.xda-developers.com/showthread.php?t=2134257&highlight=recovery
i dont understand step number 2
0.Only for unlocked bootlader
1. Copy super jelly bean and gapps to sd card
2. Flash any jb kernel for neov via fastboot.. i recommend fusion kernel 5.4 (present inside the zip file )
3.[OPTIONAL] flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.Perform Full Wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6.Flash Super Jelly Bean Rom
8.Flash the patch for your respective devices.
7.Flash gapps , Provided in download page
8.Boot
9.Let the rom settle for 15 to 20 minutes
10.Reboot at least once in 2 days
11.Enjoy
Click to expand...
Click to collapse
Well you need to unlock boatloader... Simply having unlock allowed yes won't do... Once you unlock you can flash the required kernel in fastboot...
Sent from my Xperia Neo V using Tapatalk 2
Attitude.SSJ said:
Well you need to unlock boatloader... Simply having unlock allowed yes won't do... Once you unlock you can flash the required kernel in fastboot...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
but why does it want to flash a kernel for neo v? lol a different device. also why would i need to unlock bootloader since i already installed a perfectly working cwm and rooted the phone?
pitastrudl said:
but why does it want to flash a kernel for neo v? lol a different device. also why would i need to unlock bootloader since i already installed a perfectly working cwm and rooted the phone?
Click to expand...
Click to collapse
Flash jb kernel for your device only... You need unlocked boatloader to flash custom kernel... Custom kernels are needed to boot non stock roms... With cwm you can flash rom but that doesn't mean it will boot without the corresponding kernel...
Sent from my Xperia Neo V using Tapatalk 2
You guys have no idea, what this topic is about.
pitastrudl said:
the flashtool wants a.sin file(when i tryto use "select kernal to flash").
Click to expand...
Click to collapse
Open the window, where you are supposed to choose the kernel file from. At the bottom of that window, look for a small drop-down clickable menu (by default there is *.sin written). Open the menu, choose *.img from the list and then you can flash the kernel.
EDIT: Unlock your bootloader first as well. It must show "bootloader unlocked: yes" in the menu.
Someguyfromhell said:
You guys have no idea, what this topic is about.
Open the window, where you are supposed to choose the kernel file from. At the bottom of that window, look for a small drop-down clickable menu (by default there is *.sin written). Open the menu, choose *.img from the list and then you can flash the kernel.
Click to expand...
Click to collapse
Ya that's true but he seems to have a locked bl in the first place...
Sent from my Xperia Neo V using Tapatalk 2
Attitude.SSJ said:
Ya that's true but he seems to have a locked bl in the first place...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Missed that, edited my post. Cheers!
thanks for the answers, but i already gave the device back to my friend, i was forced to install a custom rom based on ics so had no time to unlock bootloader. he needed it for work. i will probably get it again some time and unlock the bootloader. thanks again for your answers and time. I've done alot of rooting different devices but this one has giving me a hard time, maybe coz i didnt search very thoroughly and my lack of time. cheers and have a good day
Sent from my GT-I9505
i just install SJB8.0 on yesterday and found after i reboot device all shortcut in desktop that i move data to SD card disappear
but for shortcut that the data keep in phone no have any problem.
anyone can help me for this problem.
sorry for poor english
If I understand properly, you cant access files/apps that you previously backed up to sd card?
Anyway guys, Im having a really weird problem with SJB 8.0, I downloaded rom, gaps, patch and kernel, then copied everything except kernel to sd card, flashed kernel (and it worked), then I did full wipe but when I tried to flash rom, I got an "installation aborted error (bad)".
The interesting thing is that when I try to extract the rom (AND gapps) on computer, I also get an error for both of the files (the file is damaged/corrupted etc.).
So is there a problem with files (rom and gapps) on dev-host or what? It's wierd cuz patch for arc can be either flashed or extracted on computer.
Please help. :/
EDITED:
Okay problem solved, the gapps and rom files were corrupted so I had to download them couple of times to get it working (tried to extract it first on comp. to check) and then it worked while flashing too, so everything's good now.

Categories

Resources