Develop Bugs

[Q] BELL CANADA Veriant KERNEL??

Hello, I currently have the Bell Canada SGS3.
I was thinking about trying some different kernels out for my device, but I wanted to be sure I had a backup of the STOCK KERNEL in case I want to revert back to STOCK. Is there a way I can extract it from my phone, or has someone posted it already, I couldn't seem to find the a post when looking.
Thank you

unibombz said:
Hello, I currently have the Bell Canada SGS3.
I was thinking about trying some different kernels out for my device, but I wanted to be sure I had a backup of the STOCK KERNEL in case I want to revert back to STOCK. Is there a way I can extract it from my phone, or has someone posted it already, I couldn't seem to find the a post when looking.
Thank you
Click to expand...
Click to collapse
Make a backup with cwm it will backup the kernel too. I use Aokp and kt747 kernel
Sent from my SGH-I747 using Tapatalk 2

tehsprayer said:
Make a backup with cwm it will backup the kernel too. I use Aokp and kt747 kernel
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Yes I am aware of that, but I am looking for the actual kernel file.

unibombz said:
Yes I am aware of that, but I am looking for the actual kernel file.
Click to expand...
Click to collapse
Go to Samsung-updates.com and see if they have the kernel download for bell i747m s3
Sent from my SGH-I747 using Tapatalk 2

tehsprayer said:
Go to Samsung-updates.com and see if they have the kernel download for bell i747m s3
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
That is a no go buddy, I am still trying to find my stock kernel for my SGS3 ... if anyone has come across it let me know, thank you

unibombz said:
That is a no go buddy, I am still trying to find my stock kernel for my SGS3 ... if anyone has come across it let me know, thank you
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=SGH-I747M
Click the big F on the side for BMC
Sent from my SGH-I747 using Tapatalk 2

[KERNEL][T-Mobile] Stock Insecure Kernels - NEW - UVDMD5 4.1.2 - Kernel [05/17/2013]

[KERNEL][T-Mobile] Stock Insecure Kernels
T-Mobile Stock Kernel Bases!
Insecure Boot Image
Working /etc/init.d Support
Fully Working Windows ADB Support
Updated ADB Support
Stock T-Mobile ICS 4.0.4 T999-UVALH2 - Kernel
Stock T-Mobile ICS 4.0.4 T999-UVALJ4 - Kernel
Stock T-Mobile JB 4.1.1 UVDLI8 - Kernel
Stock T-Mobile Official - JB 4.1.1 UVDLJA - Kernel - With Boot Animation Enabled!
Stock T-Mobile Official - JB 4.1.1 UVDLJC- Kernel - With Boot Animation Enabled!
Stock T-Mobile Official - JB 4.1.2 UVDMD5 - Kernel - With Boot Animation Enabled!
( Need Compatible bootanimation.zip in /system/media < Folder! )
Get Some Cool Splash Screens Here ..
Link: [MOD] Stock & Custom Splash Screens
After Flashing I Recommend using ..
Android Commander - Link: http://androidcommander.com/
DroidExplorer - Link: http://de.codeplex.com/
Great Programs! No Need to know ADB Commands!
That Said .. I Use Android Commander .. It Rocks!
Installation:
KERNEL'S are flash-able zips intended for install from recovery.
-----------------------------------------------------------------
IF THINGS GO HORRIBLY WRONG ..
1. DON'T PANIC
2. RESTORE USING YOUR CWM OR TWRP FULL BACKUP !
-----------------------------------------------------------------
1. BACKUP - BACKUP - BACKUP
For God's Sake .. Do a CWM OR TWRP FULL BACKUP FIRST!
2. FLASH KERNEL IN RECOVERY
3. WIPE CACHE AND DALVIK CACHE
4. REBOOT LET ROM SETTLE 5-10 MINUTES THEN REBOOT
5. ENJOY!
How To Add init.d Support:
1. After Kernel Install and Reboot Run: init.d-Support-New.zip From Recovery
2. Reboot
3. Check to see it worked!
4. Look in the: /data/local/tmp/init.d_log_test.txt
Look Inside: init.d_log_test.txt - You Should See: INIT Working
--------------------------------------------------------------------------------------------------
If you have a problem with WIFI or BLUETOOTH
Or if your coming from a Different Kernel Install This Module Zip ..
Download: http://d-h.st/GRX
--------------------------------------------------------------------------------------------------
If You Do! Then You have A 100% Working Kernel !
Hope You Like .. Hit the Thanks ! & Please Leave Some Feed Back!

Nice, thanks op will be trying these out
Sent from my SGH-I747 using Xparent Blue Tapatalk 2

marseillesw said:
Nice, thanks op will be trying these out
Sent from my SGH-I747 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Cool .. Please Let Me Know ..

Enyone flashed these kernel how does the battery life good or bad.
Thanks for the kernels.
Sent from my SGH-T999 using xda premium

razielpr said:
Enyone flashed these kernel how does the battery life good or bad.
Thanks for the kernels.
Click to expand...
Click to collapse
Well they are Stock Kernels ..
So Should be the same!
However I am Getting Really Good Battery Life From The: T999UVALJ4-Kernel

So far kernel running smoothly. Still to early to tell about battery, but it's looking good so far. Do u have any plans to oc and add extra governors to these kernels? That would be the bizness if u do..just asking bro. Thanks!
Sent from my SGH-I747 using Xparent Blue Tapatalk 2

Yes oc would be nice.
Sent from my SGH-T999 using xda premium

Im on stock rooted j4 i can flash the insecure j4 over the one im running without problems???
Sent from my SGH-T999 using xda premium

razielpr said:
Im on stock rooted j4 i can flash the insecure j4 over the one im running without problems???
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes. I just did
Sent from my SGH-T999 using xda premium

Ok thanks will give a try.
Sent from my SGH-T999 using xda premium

razielpr said:
Ok thanks will give a try.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Did it work ?

Thank you for these.
Kernels work great.

I just rooted my T-Mobile Note 2 - T889 and have successfully backed up via the CWM by doing it via the bootup screen also did a titanium backup just in case.
Not sure how to install the insecure boot.img. I checked the instructions but not sure what it all means. please help
Also...forgot to ask....
How do I know which J2 or J4 to flash?
Please advise...any help will be GREATLY appreciated!!!

Which kernel should be used on a stock Tmobile note as there are different versions I see
Sent from my SGH-T889 using xda app-developers app

elite-fusion said:
I just rooted my T-Mobile Note 2 - T889 and have successfully backed up via the CWM by doing it via the bootup screen also did a titanium backup just in case.
Not sure how to install the insecure boot.img. I checked the instructions but not sure what it all means. please help
Also...forgot to ask....
How do I know which J2 or J4 to flash?
Please advise...any help will be GREATLY appreciated!!!
Click to expand...
Click to collapse
ezsoulja said:
Which kernel should be used on a stock Tmobile note as there are different versions I see
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I'm just guessing here, but you'll probably need a kernel from the Note forum.....
Sent from my SGH-T999 using xda app-developers app

Quick question..which of these would work best with the serenity port? My guess would be the jelly bean version, but I'm not quite sure which leak the port is based on..thanks in advance
Edit: never mind, I got it
sent from GS3 disguised as a GNote2

DocHoliday77 said:
I'm just guessing here, but you'll probably need a kernel from the Note forum.....
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Yes .. These Kernels are for t-mobile Galaxy s3 .. NOT For the Note 2 !

Do you happen to know if there is an insecure boot.img for the Note 2?

elite-fusion said:
Do you happen to know if there is an insecure boot.img for the Note 2?
Click to expand...
Click to collapse
Nope sorry .. Have you done a search ?>

init.d-Support-new.zip - [Click for QR Code] (152.6 KB)
New Updated: init.d-Support-new.zip
Should Work In Most cases.

[Modem][Firmware]Updated With Some LK8!

Here is a list of modems, firmware and such for the L900
LJ1 Full Modem | Kernel
LJC Full Modem | Sboot and Tz | LJ1 to LJC All-In-One Firmware Update | Kernel
LK8 Full Modem | Sboot and Tz | LJC to LK8 All-In-One Firmware Update | Kernel

Rudyblah said:
For those of us too lazy to flash back to stock just for the newer modem i made this zip to only do the modem update of the ota.
Click to expand...
Click to collapse
Good Work! and 1st!

Thank you good sir!
Flash went through flawless.
Sent from my J-BoMbEd Note2 using XDA Premium App

3rd. Thanks!
Sent from my GNote II

Does this work on stock rooted odex? I don't have access to a computer could I just download this and flash through twpr?
Sent from my SPH-L900 using xda premium

Thnx
FABULOUS work dude.:laugh:

stylz3 said:
Does this work on stock rooted odex? I don't have access to a computer could I just download this and flash through twpr?
Click to expand...
Click to collapse
Yes, It should flash right through twpr

Sorry for the noob question. How do you find out what version of modem you have on the phone? What is the lastest version?

theoner1 said:
Sorry for the noob question. How do you find out what version of modem you have on the phone? What is the lastest version?
Click to expand...
Click to collapse
System Settings -> About device -> Read the "Baseband version" and it should say L900VPALJ1 because that is what the device shipped with

Now only if somebody can make an all in one that includes: firmware/baseband/modem that would be awesome!

steezc said:
Now only if somebody can make an all in one that includes: firmware/baseband/modem that would be awesome!
Click to expand...
Click to collapse
+1
Sent from my SPH-L900 using xda premium

Is there a way to go back to LJ 1? LJC isn't performing well on 4G. Its struggles to hold a signal while LJ 1 was holding a signal all day yesterday and this morning.
Sent from my SPH-L900 using xda premium

Man you rock awesome!!!!:good::good::good:

This is great! Nice job!

shook187 said:
Is there a way to go back to LJ 1? LJC isn't performing well on 4G. Its struggles to hold a signal while LJ 1 was holding a signal all day yesterday and this morning.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Blame sprintsung.
He didnt build it. He just made it flashable.
U can flash viperboys lj1 stock tar with odin. The flash rom of choice. Then u are back on lj1 firmware.
Sent from my SPH-L900 using Xparent ICS Tapatalk 2

steezc said:
Now only if somebody can make an all in one that includes: firmware/baseband/modem that would be awesome!
Click to expand...
Click to collapse
Like what i have under non-stock recovery section here: http://forum.xda-developers.com/showthread.php?t=1978470
or you looking for something else?

mrRobinson said:
Like what i have under non-stock recovery section here: http://forum.xda-developers.com/showthread.php?t=1978470
or you looking for something else?
Click to expand...
Click to collapse
Like what Freeza did for the S3....Full Firmware All-In-One (Baseband/modem&tz,rpm,sbl2,sbl3,aboot) Flashable with any recovery.
(http://forum.xda-developers.com/showthread.php?t=1743923)
It will automatically update everything without going back to stock etc. That way all we wait for is the updated rom with the new baseband/firmware based

joshbeach said:
Blame sprintsung.
He didnt build it. He just made it flashable.
U can flash viperboys lj1 stock tar with odin. The flash rom of choice. Then u are back on lj1 firmware.
Sent from my SPH-L900 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Do we have to use that stock tar? Theres nothing we can flash to revert back? Seem to be having not as good 3g signal.
Sent from my SPH-L900 using Tapatalk 2

Can you do the all in one update minus the checks
Sent from my SPH-L900 using Tapatalk 2

I'll see about pulling the full modem image for both and making flashables. As for removing the checks on the ota, that might cause issues. You would probably be better off flashing joshbeach's stock LJC rom and then doing the modem update
Sent from my SPH-L900 using xda app-developers app

[KERNEL][4.2/4.2.1] Stock kernel - CWM flashable

I've been playing with a few of the kernels available for 4.2.x so far and wanted to get back to the stock kernel in between testing kernels out. Also good for those who may have accidentally flashed a 4.1.2 kernel. This is a flashable CWM 4.2 Galaxy Nexus JOP40C kernel. Tested and working on my stock/rooted 4.2/4.2.1 GNex. As always, flash at your own risk.
Thanks to kalo86 for providing the AOSP ROM 4.2 zip where the boot image came from. :good:

jlink38 said:
I've been playing with a few of the kernels available for 4.2 so far and wanted to get back to the stock kernel in between testing kernels out. Also good for those who may have accidentally flashed a 4.1.2 kernel. This is a flashable CWM 4.2 Galaxy Nexus JOP40C kernel. Tested and working on my stock/rooted 4.2 GNex. As always, flash at your own risk.
Thanks to kalo86 for providing the AOSP ROM 4.2 zip where the boot image came from. :good:
Click to expand...
Click to collapse
Thank you sir!
Sent from my Galaxy Nexus using Tapatalk 2

wish i had had this yesterday....haha thanks sir.

good job！thanks
Sent from my Galaxy Nexus using xda premium

Thanks for taking the time to post this kernel. A lot of people have been looking for it.
Sent from my Galaxy Nexus using Tapatalk 2

_Opiate_ said:
Thanks for taking the time to post this kernel. A lot of people have been looking for it.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
No problem!
Sent from my Nexus 7 using Tapatalk 2

Thank you. This is definitely very helpful for people like me who aren't aware that custom kernel wouldn't be backwards compatible.
However, I'm using nexus 7, just wondering how could I extract the stock kernel from the nexus 7 factory image?
(I understand that this isn't a nexus 7 post but I'm just asking a general question on how to get the stock kernel hope that's ok)
I assume this kernel wouldn't work for my device either?
Thanks in advance.

SpikeySpy said:
Thank you. This is definitely very helpful for people like me who aren't aware that custom kernel wouldn't be backwards compatible.
However, I'm using nexus 7, just wondering how could I extract the stock kernel from the nexus 7 factory image?
(I understand that this isn't a nexus 7 post but I'm just asking a general question on how to get the stock kernel hope that's ok)
I assume this kernel wouldn't work for my device either?
Thanks in advance.
Click to expand...
Click to collapse
Good question. I will create a stock kernel flash for the Nexus 7 (as I have one as well) and post it up there in the N7 XDA forum.
Also, the kernel is the boot.img file located in the zip for ROMs. You can fastboot install it, or make it into a CWM file which is good in case you don't have a computer with ADB nearby. Link to N7 Stock kernel:
http://forum.xda-developers.com/showthread.php?p=34254473
Thanks!

Thank you for ur reply. Definitely gonna save me lots of time!
How do you make it a cwm file? Just zipping the .img file?
Also, I can't seems to boot into cwm recovery without a toolkit is that normal for installing an incorrect custom kernel?

SpikeySpy said:
Thank you for ur reply. Definitely gonna save me lots of time!
How do you make it a cwm file? Just zipping the .img file?
Also, I can't seems to boot into cwm recovery without a toolkit is that normal for installing an incorrect custom kernel?
Click to expand...
Click to collapse
Boot up holding all the buttons to get into recovery. Then flash.
Google for the cyanogenmod walkthrough on how to make a kernel flash. Its a bit in depth for here. Good luck!
Sent from my Nexus 7 using Tapatalk 2

Android 4.2.2
Is this kernel compatible with stock Android 4.2.2?

Not sure actually. Hopefully someone can test it out as I no longer have a GNex.
Sent from my GT-I9300 using Tapatalk 2

delete

jlink38 said:
I've been playing with a few of the kernels available for 4.2.x so far and wanted to get back to the stock kernel in between testing kernels out. Also good for those who may have accidentally flashed a 4.1.2 kernel. This is a flashable CWM 4.2 Galaxy Nexus JOP40C kernel. Tested and working on my stock/rooted 4.2/4.2.1 GNex. As always, flash at your own risk.
Thanks to kalo86 for providing the AOSP ROM 4.2 zip where the boot image came from. :good:
Click to expand...
Click to collapse
It is good for Gnex 4.2.2 too ?
Thanks

Deleted

paolocorpo said:
It is good for Gnex 4.2.2 too ?
Thanks
Click to expand...
Click to collapse
Better not flash it as 4.2.1 and 4.2.2 kernels are not compatible with each other.
Sent from my Galaxy Nexus using Tapatalk 2

is there a flashable kernel for 4.1.1? i'm trying to do OTA but it craps out because of franco Kernel that I have installed (and i didnt do backup(()

Sorry for this noob question,can i flash this kernel and use it with 4.1.2 stock rom?
Sent from my Galaxy Nexus using xda app-developers app

RezaFaliq said:
Sorry for this noob question,can i flash this kernel and use it with 4.1.2 stock rom?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
The title of this thread states 4.2/4.21, so my guess would be no on 4.1.2

[ROM]Team Kernelizers: Stock JB MA4 De-odexed 4.1.2

Hey everyone this was my first time trying to deodex a rom and i was finally able to boot it. Anyways this is based on the leak that was provided to us by Sextape. I used Cygwin to deodex the rom and sign it.
Anyways the important stuff is that this is the first De-odexed MA4 so far that I have seen.
One problem is that it install, but when you reboot the system it will hang at the Samsung Screen (so its a problem with the stock kernel), so to get it to boot make sure you have a secondary kernel downloaded such as: Agat, Anthax, or Ktoonz and install it after you install the zip.
I am going to fix the kernel thing in the morning. For now I am tired. Good day everyone.
The ROM included Root, Superuser, Zip-aligned APK's, and De-odexed System and APK's
This rom does not have Multi View. It is the 4.1.2 update from Sprint.
Warning: I am not responisible for anything that happens to your phone; whether it blows up in your face or gets bricked
Download:
http://www.androidfilehost.com/?fid=9390288116658472348
Install instructions:
1. Download Rom
2. Place it in your SD card
3. Boot into Recovery (only tested on CWM)
4. Wipe Data/Cache/Dalvik
5. Install zip
6. Install a secondary kernel like Agats LJ7 or Ktoonz latest TW kernel or Anthrax
7. Fix permissions in recovery
8. Boot up and ENJOY
Thanks to:
Sextape
Rwilco12
and other for providing us with the files of MA4

Mine
Additions:
MA4 modem (thanks to Sextape)
http://www.sxtpdevelopers.com/showthread.php?t=126
Ktoonz Kernel:
http://forum.xda-developers.com/showthread.php?t=1800576
Agats Kernel:
http://forum.xda-developers.com/showthread.php?t=1956392
Anthax:
Well you going to have to find that one on your own
Hint: Google

Uno mas
Uno mas

Re: [ROM]★Team Kernelizers★: MA4 De-odexed
Sent from my SPH-L710 using Tapatalk 2

First. downloading now. thanks,

Re: [ROM]★Team Kernelizers★: MA4 De-odexed
dgalioto said:
First. downloading now. thanks,
Click to expand...
Click to collapse
No problem make sure you have that secondary kenel
Sent from my SPH-L710 using Tapatalk 2

daniel4653 said:
No problem make sure you have that secondary kenel
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Yep. got the same kernel your using ready to go.

Re: [ROM]Team Kernelizers: Stock MA4 De-odexed
daniel4653 said:
Uno mas
Click to expand...
Click to collapse
Awesomeness nice work Daniel! Ill have to gibe it a test when i am not so busy. Way to get the ball rolling
Side Note: More screens please
Does this have Multiview or any of those features, sorry I don't know much of the M4A update.

Re: [ROM]Team Kernelizers: Stock MA4 De-odexed
Looks interesting .. great job
Sent from my SGS3 using xda app-developers app

Re: [ROM]Team Kernelizers: Stock MA4 De-odexed
mw86 said:
Awesomeness nice work Daniel! Ill have to gibe it a test when i am not so busy. Way to get the ball rolling
Side Note: More screens please
Does this have Multiview or any of those features, sorry I don't know much of the M4A update.
Click to expand...
Click to collapse
Thanks mw86!! Glad to contribute to the community in some way.
I'll add some more in the morning. I am tired right now Lol.
No this doesnt have multiview. I'll add that on in a bit.
Sent from my SPH-L710 using Tapatalk 2

Re: [ROM]Team Kernelizers: Stock MA4 De-odexed
mw86 said:
Awesomeness nice work Daniel! Ill have to gibe it a test when i am not so busy. Way to get the ball rolling
Side Note: More screens please
Does this have Multiview or any of those features, sorry I don't know much of the M4A update.
Click to expand...
Click to collapse
No multiview on this leak, I can tell you that
Sent from my SPH-L710 using xda premium

Re: [ROM]Team Kernelizers: Stock MA4 De-odexed 4.1.2
Ceelos09 said:
No multiview on this leak, I can tell you that
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I already knew that . Added to OP
Sent from my SPH-L710 using Tapatalk 2

FYI - I can't get the download to finish. Yes I'm using my pc to download it. keeps stopping between 160 and 210 mbs. I'll try again later.

Thanks for the fast release Danny boy!
Sent from my SPH-L710 using xda app-developers app

Battle of the Build ...Team K vs MIJJ for MA4 supremacy. Lets get this Rom Ktooned!

fluk321 said:
Battle of the Build ...Team K vs MIJJ for MA4 supremacy. Lets get this Rom Ktooned!
Click to expand...
Click to collapse
Haha whay the hec i just saw that he released one!
Custodian said:
Thanks for the fast release Danny boy!
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
You're welcome.
Sent from my SPH-L710 using Tapatalk 2

To show what this rom is capable of
Sent from my SPH-L710 using Tapatalk 2

Is this completely stock or themed a little or modified
Sent From My Rooted, S-OFF'd Blackberry Curve using the iOS XDA Application for Android.

Whiplashh said:
Is this completely stock or themed a little or modified
Sent From My Rooted, S-OFF'd Blackberry Curve using the iOS XDA Application for Android.
Click to expand...
Click to collapse
Completely stock.
Sent from my SPH-L710 using Tapatalk 2

I get a little bit of lag in the animation when opening folders and just in general on the transitions. Do you find yours doing the same? Just curious if it's an isolated thing for me. Thanks!
daniel4653 said:
Completely stock.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse