[Q]Int2ext4+ stock rom - HTC Wildfire S

Is it possible to use int2ext4 on the stock Rom? Do we need to use a kernel or something?
Sent from my HTC Wildfire S A510e using xda app-developers app

Odp: [Q]Int2ext4+ stock rom
Yes it is possible, but you need kernel with ext4 support and init.d enabled.

Yasounet said:
Yes it is possible, but you need kernel with ext4 support and init.d enabled.
Click to expand...
Click to collapse
Which kernel supports ext4?
Sent from my HTC Wildfire S A510e using xda app-developers app

Is it possible for a stock kernel to support ext4? Because I'm using cake kernel now and the battery drain is quite bad. Can someone help me?
Sent from my HTC Wildfire S A510e using xda app-developers app

FAtfcK said:
Is it possible for a stock kernel to support ext4? Because I'm using cake kernel now and the battery drain is quite bad. Can someone help me?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
stock kernel isnt support ext4.
use int2ext+ its same as int2ext4+ but just works with ext3.
not much difference between them.
use int2ext4+ with only cm9.1/cm10.

Related

App2ext and data2ext with stock ROM and root

There is an application or something similar to enable app2sd and/or data2ext?
Or there is a ROM based on stock ROM with this two features?
thanks for help!
Sent from my HTC Desire using XDA App
You can use link2sd on a stock rom (rooted) without busybox and init.d support. Im sure it wouldnt be as good as a2sd+ or data2sd.
If you want a2sd+ redcommend teppic74's rooted stock GB. If data2sd, Supernova or any other of Droidzones roms....
These are all listed in the "Everything desire is here" thread in the dev forum. Link2sd is on the market
Thanks!
I'll try asap!
Sent from my HTC Desire using XDA App
where i can download it ?
Link2sd is in play store.
Roms can be found on this forum.
All the custom roms have app2sd!
Sent from my HTC Desire using xda app-developers app
for me best are roms with that included
Try CM or BCM rom.They are all have included.
Sent from my HTC Desire CDMA using xda app-developers app
gnokiar said:
Try CM or BCM rom.They are all have included.
Sent from my HTC Desire CDMA using xda app-developers app
Click to expand...
Click to collapse
the thread started with stock Roms, not aosp.
Sent from my HTC Desire using xda app-developers app

need oc kernel for htc wildfire s stock rom 2.3.3

need oc kernel for wildfire s stock rom 2.3.3 kernal 2.6.35.10
Download from 1st post.. cake kernel...flash from recovery
http://forum.xda-developers.com/showthread.php?t=1797588
Sent from my HTC Wildfire S A510e using xda app-developers app
fireworker said:
need oc kernel for wildfire s stock rom 2.3.3 kernal 2.6.35.10
Click to expand...
Click to collapse
check out einstein.frat kernels, they are the best. It may say that it is for 2.3.5 but i tried them on 2.3.3 and the kernel works fine
Can i install these kernels with locked bootloader and rooted s-off
Sent from my HTC Wildfire S A510e using xda app-developers app
fireworker said:
Can i install these kernels with locked bootloader and rooted s-off
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
yes , with s-off
MiniX10 - Wildfire
Hi
I would like to load: http://forum.xda-developers.com/show....php?t=1967851
But it refers to a Kernel: http://forum.xda-developers.com/show...php?p=25550442
And it seems it is for the MiniX10
any ideas

Link2sd with stock rom rooted s-off

Will work?
Sent from my HTC Wildfire S A510e using xda app-developers app
Odp: Link2sd with stock rom rooted s-off
It will, but you also need init.d support, just follow instructions in this topic to enable it on stock rom
http://forum.xda-developers.com/showthread.php?t=1933849
edu_stoicescu said:
Will work?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
definately work.and i dont think link2sd needs init.d support.
its for int2ext+ and mounts2sd scripts.
I have a sd class 4 card ... What script do you recommend?few weeks ago i tryed with stock rom,same as my current rom and didnt work but now i have made my phone s-off.
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
I have a sd class 4 card ... What script do you recommend?few weeks ago i tryed with stock rom,same as my current rom and didnt work but now i have made my phone s-off.
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
which partition you are using with link2sd? use ext3 its better fast and work all the time.
for script use cronmod int2ext+
http://forum.xda-developers.com/showthread.php?t=1716124
its fast stable and great.i am using it. but for this script you need init.d support on your rom.
with s-off you can just port radio,and other ruu easily and also you can mtd partition and advanced stuff.:good:
and use ext3 partition bcz ext4 isn't support by much kernels so.
EDIT: but if you have cm9/cm10 rom installed on phone you can use int2ext4+ script (Ext4) partition. else use int2ext+ (Ext3)
How can i activate init.d support without a pc?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
How can i activate init.d support without a pc?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
difficult.i really dont know about how to add init.d support in rom(when you're using it). that guy posted link of thread which can give you init.d support.so follow it.
i think its only way.
in btw i can make rom with init.d support but i need boot and system files of rom.in short backup of rom or ruu.
I using kimsmod stock
Sent from my HTC Wildfire S A510e using xda app-developers app
How can i check if this rom have init.d active?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
I using kimsmod stock
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
if you are using this kimsmod
http://forum.xda-developers.com/showthread.php?t=1771646
it has init.d support already.
but for int2ext+ you need to reflash your rom and then right after rom flash int2ext+ script.or it wont work.
edu_stoicescu said:
How can i activate init.d support without a pc?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
1. Download https://play.google.com/store/apps/details?id=stericson.busybox , open app, pick "normal method", reboot phone.
2. Download http://www.androidfilehost.com/?fid=9390248398092764054 , open app, pick "activate"
And thats about it, no PC required.
edu_stoicescu said:
How can i check if this rom have init.d active?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
go to /system/etc and see if there init.d folder.
you have init.d support.
Thanks.see you tomorrow.good night.thanks again
Sent from my HTC Wildfire S A510e using xda app-developers app
Yasounet said:
1. Download https://play.google.com/store/apps/details?id=stericson.busybox , open app, pick "normal method", reboot phone.
2. Download http://www.androidfilehost.com/?fid=9390248398092764054 , open app, pick "activate"
And thats about it, no PC required.
Click to expand...
Click to collapse
hey man i think that play store app can install busybox not busy box run aparts(init.d).
have you try that self?
crossfire77 said:
hey man i think that play store app can install busybox not busy box run aparts(init.d).
have you try that self?
Click to expand...
Click to collapse
I wouldnt post something not checked by myself before
Yasounet said:
I wouldnt post something not checked by myself before
Click to expand...
Click to collapse
oh cool then.now i knew another method for init.d thanks mate.
This script how is working exactly?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
This script how is working exactly?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
INT2EXT+
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
-First universal INT2EXT method
its dev said.
you just need to flash it. then go to mounts and storage> format /sd-ext
reboot.
now in your phone
go settings>applications>manage applications
you can see increased internal memory as you partitioned your sd card.
its same as data2sd script you have seen in old 3.5 sense rom and others but just more fast and new.
Looks very nice but i have a microsd class 4 of 32 gb. Will not be slow?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
Looks very nice but i have a microsd class 4 of 32 gb. Will not be slow?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Nope.it works fine.i used it before.
Give it a shot.
And also we dnt hv any other option..link2sd dont work good now.and slow phone very much after some apps and also not much apps go to sd-ext by it (atleast on my phn)
Sent from my HTC Wildfire S A510e using Tapatalk 2

Search stock rom

Hi can you help me?
I search stock rom with,good camera,battery and data2sd or int2ext..partition ..
I dont know which is the best..can you help me? thank
This one worked good for me: http://forum.xda-developers.com/showthread.php?t=2143410
Sent from my HTC One using xda app-developers app
and which kernel is the best for this rom?
If you want a kernel that can oc or supports ext4, then you need to download the oc kernel in the same thread. If you dont need that you can leave it the way it is
Sent from my HTC One using xda app-developers app
Foxtrot2_nov said:
If you want a kernel that can oc or supports ext4, then you need to download the oc kernel in the same thread. If you dont need that you can leave it the way it is
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
ň
ok please give me gapps for this rom
stew0.sv said:
ň
ok please give me gapps for this rom
Click to expand...
Click to collapse
This is stock and this will have gapps included, so no need to flash them.
I have a question..
i have 4.2.2 android before,and i listen music and display was off..i can change next song if i hold on music volume + ..and song was change..
why ist not support on stock rom,and how i can change it?
Because it's not a feature in stock Rom, there's no changing that.
Sent from my magical penguin
My SSensi V1.0 ;p
Sent from my HTC Wildfire S A510e using Tapatalk

Rom suggestion

Can anybody sugest any rom that stable and bug free..other then sense 2.1 stock rom and rom that based on it..currently using touchwiz based custom rom..just want to experimenting other rom with my fon...
Sent from my Wildfire S A510e using xda app-developers app
CM works fine
Dont forget to press thanks if i helped...
Sent from my GT-S5360 using xda app-developers app
With one cm do u mean there is many version of it..like cm 7..cm 9 and other..
Sent from my Wildfire S A510e using xda app-developers app
mokies said:
With one cm do u mean there is many version of it..like cm 7..cm 9 and other..
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Yes....
Sent from my GT-S5360 using xda app-developers app
Sorry for my typing error..which cm that stable and almost or fully bugfree..
Sent from my Wildfire S A510e using xda app-developers app
Marvellous CM 10 is one of the most stable ROMs...
Marvelous cm10..fully working or a still have a bug??.coz i currrently using sense 2.1 marvelous rom..and still searching other custom rom that not based on stock rom
Sent from my Wildfire S A510e using xda app-developers app
marvelous cm 10 is bugfree you can try it if you want JB
mokies said:
Marvelous cm10..fully working or a still have a bug??.coz i currrently using sense 2.1 marvelous rom..and still searching other custom rom that not based on stock rom
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
[ROM][AROMA][JB]Marvellous CM10[BUGFREE][STABLE][SMOOTH][22-07-2013]
Works perfect, didnt find any bug (yet).
Aroma installer makes is very easy to (de)select any extra mods you want to use.
Currently i have found the bugfree n smooth custom rom..marvelous cm 10 is the answer..
But 1 thing i found in this rom is the usage of ram is more than sense 2.1 marvelous rom..btw i want to use this rom 4 daily usage..nice n smooth..can i know what is supercharge..i cant found the option in this rom..cm10 marvelous..
Sent from my Wildfire S A510e
Is it 4.x? And does it support MarvelC?
Sent from my backup phone

Categories

Resources