Hi, im new here, anyway here it goes.
I recently have got myself a Huawei Ascend P1 LTE On EE Network and up to now the phone has been great.
Now however i tried to install a beats audio enabler from google play, the phone rebooted but now will not do anything after it boots to the Huawei Ascend Logo. The screen just turns black.
I can boot the handset into stock recovery (Power + Volume Up Key) and i can boot the phone into Fastboot mode (Volume + & - Plus power key).
I really need my phone so if possible could somebody post to me a thread with step by step instructions to downloading stock roms for my phone (including links) and installing them to my phone so i can get it to boot (including required software).
Thanks
Acalvert2012 said:
Hi, im new here, anyway here it goes.
I recently have got myself a Huawei Ascend P1 LTE On EE Network and up to now the phone has been great.
Now however i tried to install a beats audio enabler from google play, the phone rebooted but now will not do anything after it boots to the Huawei Ascend Logo. The screen just turns black.
I can boot the handset into stock recovery (Power + Volume Up Key) and i can boot the phone into Fastboot mode (Volume + & - Plus power key).
I really need my phone so if possible could somebody post to me a thread with step by step instructions to downloading stock roms for my phone (including links) and installing them to my phone so i can get it to boot (including required software).
Thanks
Click to expand...
Click to collapse
Boot into stock recovery and try clearing cache, if that dont work boot into stock recovry and factory reset, you can boot into recovery by holding down the volume up button and power on the device, do not flash any ascend p1 u9220 roms to your device or you will brick it , the lte version has different firmware in the radios and it may well kill your phone
.
Thanks for the reply, ive tried factory resetting the phone, it does that but fails to reboot. I then switch off the phone, turn it back on and it loads the 1st huawei ascend logo, vibrates then goes to a black screen and does nothing else.
I flashed u9200 recovery because I thought there's no difference. now it only boots until huawei logo. is my phone bricked? if yes, can I anyhow unbrick?
You can always salvage your phone if you can boot into recovery. Simply flash the stock ROM and kernel back.
Sent from my Xperia X10 using xda app-developers app
CCVader13 said:
You can always salvage your phone if you can boot into recovery. Simply flash the stock ROM and kernel back.
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
1. I cannot get into recovery, only fastboot
2. there is no stock Rom for the p1 lte
entonjackson said:
1. I cannot get into recovery, only fastboot
2. there is no stock Rom for the p1 lte
Click to expand...
Click to collapse
send it back.its bricked tell a tale of woe..,there are a few custom roms about but for the p1 only not the p1 lte so your a bit buggered at the moment.
This might help.
I also once flashed beats audio and my legend was in boot loop like urs.I fixed it by flashing new rom.
Sent from my Legend using xda app-developers app
thanks. I already fixed it. someone provided me a boot.img, recovery.img and system.img of his working p1 lte. I flashed system.img over fastboot. then I booted my phone with fastboot boot boot.img and then over adb flashed boot.img and recovery.img because over fastboot flash I was always getting download size too large error.
now it works fine again.
entonjackson said:
thanks. I already fixed it. someone provided me a boot.img, recovery.img and system.img of his working p1 lte. I flashed system.img over fastboot. then I booted my phone with fastboot boot boot.img and then over adb flashed boot.img and recovery.img because over fastboot flash I was always getting download size too large error.
now it works fine again.
Click to expand...
Click to collapse
nice maybe share.
ROM or Backup
entonjackson said:
thanks. I already fixed it. someone provided me a boot.img, recovery.img and system.img of his working p1 lte. I flashed system.img over fastboot. then I booted my phone with fastboot boot boot.img and then over adb flashed boot.img and recovery.img because over fastboot flash I was always getting download size too large error.
now it works fine again.
Click to expand...
Click to collapse
Can u make a backup and give me ur phone ROM cz i need a stock rom or backup :/
r4z-xda said:
Can u make a backup and give me ur phone ROM cz i need a stock rom or backup :/
Click to expand...
Click to collapse
I don't have the device no more, but this thread will certainly help you!
i have problem..my phone won't switch on...after overheat..no LED flash...this is can consider hard brick???
You probley toasted the battery burnt it out.get the back off and see whats happened you can replace the battery and see if anything has burnt out.
Sent from my GT-P5110 using xda premium
Pls post system.img boot.img and recovery.img
entonjackson said:
I flashed u9200 recovery because I thought there's no difference. now it only boots until huawei logo. is my phone bricked? if yes, can I anyhow unbrick?
Click to expand...
Click to collapse
Can you post the files for p1 lte as i can't find them anywhere?
http://consumer.huawei.com/en/support/products/downloads/detail/index.htm?id=14401&pro=U9202L
Related
yesterday i was in the franco kernel updater app and i saw a new nightly to i wanted to flash it but by mistake i looks like flashed milstone version so the device got root access to restart the device and flash the kernel
but the device rebooted to stuck at Google logo for 15min so i pulled out the battery re-insert it and press the power button and nothing happens still stuck at Google logo with no boot loop or restarting it self
i can get to CWM and fastboot but when i start the device its stuck at that :crying:
my phone is on that way since yesterday and i cant leave it like this for longer time since iam travailing nor can i wipe every thing on it and get a fresh start cuz i do have important things on the sdcard
plz help
i do believe its a kernel related issue but what can i do ?? i cant push a .zip kernel to flash it in CWM
jik saw said:
yesterday i was in the franco kernel updater app and i saw a new nightly to i wanted to flash it but by mistake i looks like flashed milstone version so the device got root access to restart the device and flash the kernel
but the device rebooted to stuck at Google logo for 15min so i pulled out the battery re-insert it and press the power button and nothing happens still stuck at Google logo with no boot loop or restarting it self
i can get to CWM and fastboot but when i start the device its stuck at that :crying:
my phone is on that way since yesterday and i cant leave it like this for longer time since iam travailing nor can i wipe every thing on it and get a fresh start cuz i do have important things on the sdcard
plz help
i do believe its a kernel related issue but what can i do ?? i cant push a .zip kernel to flash it in CWM
Click to expand...
Click to collapse
what rom zip files do you have on your sdcard.
thanked for error.
tried flashing a boot.img via fastboot?standard or from another dev's kernel not in AK format (zimage)
or
tried flash another rom that you have zip inside phone?if you dirty flash,you simple don't loose anything..and the boot.img it's reflashed.
WRONG SECTION;READ THE RULES
jik saw said:
yesterday i was in the franco kernel updater app and i saw a new nightly to i wanted to flash it but by mistake i looks like flashed milstone version so the device got root access to restart the device and flash the kernel
but the device rebooted to stuck at Google logo for 15min so i pulled out the battery re-insert it and press the power button and nothing happens still stuck at Google logo with no boot loop or restarting it self
i can get to CWM and fastboot but when i start the device its stuck at that :crying:
my phone is on that way since yesterday and i cant leave it like this for longer time since iam travailing nor can i wipe every thing on it and get a fresh start cuz i do have important things on the sdcard
plz help
i do believe its a kernel related issue but what can i do ?? i cant push a .zip kernel to flash it in CWM
Click to expand...
Click to collapse
Try restoring from nand backup or reinstall the ROM
Sent from my Galaxy Nexus using xda premium
As nexxusdev is implying, just flash your ROM again.
Sent from my Galaxy Nexus using xda premium
nexxusdev said:
what rom zip files do you have on your sdcard.
Click to expand...
Click to collapse
i have none not even the kernel zip file
sert00 said:
thanked for error.
tried flashing a boot.img via fastboot?standard or from another dev's kernel not in AK format (zimage)
or
tried flash another rom that you have zip inside phone?if you dirty flash,you simple don't loose anything..and the boot.img it's reflashed.
WRONG SECTION;READ THE RULES
Click to expand...
Click to collapse
i will try to flash boot.img from another kernel and will see what happens
and i dont have any flash zip files in my sd card but i learned the lesson i will always leaves a kernel zip and rom zip file in case
and sorry for that but i was in hurry my primary phone is messed up
Chance Ill said:
Try restoring from nand backup or reinstall the ROM
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
iam on stock JB
obtained said:
As nexxusdev is implying, just flash your ROM again.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
its stock JB rom flashed it over with galaxy nexus toolkit and downloaded the rom from google's site so its not a zip flashable
thanks all for replys and sorry for thw wrong section
im not sure but i remember on my g2x you could hook up phone from recovery mode and mount it on the computer with sd card .. have you looked around in CWM? This is your fault to be honest you deserve this for not making a NAND back up. ALWAys MAKE A BACK UP! period. There is a reason why devs and everyone else stress' it so much.
Sert00 is right. Flash any [previously] working ROM on it. It will be a dirty flash and some stuff won't work, but you'll be able to backup your data. You'll reflash again later
ed116 said:
im not sure but i remember on my g2x you could hook up phone from recovery mode and mount it on the computer with sd card .. have you looked around in CWM? This is your fault to be honest you deserve this for not making a NAND back up. ALWAys MAKE A BACK UP! period. There is a reason why devs and everyone else stress' it so much.
Click to expand...
Click to collapse
Unfortunately, at least with these beta realeases of JB, usb mount via recovery almost never work.
Try what sert00 told you.
jik saw said:
yesterday i was in the franco kernel updater app and i saw a new nightly to i wanted to flash it but by mistake i looks like flashed milstone version so the device got root access to restart the device and flash the kernel
but the device rebooted to stuck at Google logo for 15min so i pulled out the battery re-insert it and press the power button and nothing happens still stuck at Google logo with no boot loop or restarting it self
i can get to CWM and fastboot but when i start the device its stuck at that :crying:
my phone is on that way since yesterday and i cant leave it like this for longer time since iam travailing nor can i wipe every thing on it and get a fresh start cuz i do have important things on the sdcard
plz help
i do believe its a kernel related issue but what can i do ?? i cant push a .zip kernel to flash it in CWM
Click to expand...
Click to collapse
fastboot is all you need. find a stock rom and flash
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase cache ???
fastboot erase data
this should work
thank u guys soooooooooooooooooooooooooooooooooooo much
iam very very very very great full to all of u for ur help and for giving me some ideas
i have solved it by extract the .tar imge file that i downloaded from here
and searched for the boot.img file flashed it over galaxy nexus toolkit and now the device restarted and android is upgrading 156 app lol
thanks again and sorry for the wrong section and hey .... why not editing the thread to make it a helpful guide to those who brick their phones like what i just did
djjonastybe said:
fastboot is all you need. find a stock rom and flash
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase cache ???
fastboot erase data
this should work
Click to expand...
Click to collapse
he didn't want to lose anything...also the data of apps
@jig saw
happy to read that!and from now on,leave inside the phone all the stuff you could need in case similar to what happened you!cheers!:laugh:
sert00 said:
he didn't want to lose anything...also the data of apps
@jig saw
happy to read that!and from now on,leave inside the phone all the stuff you could need in case similar to what happened you!cheers!:laugh:
Click to expand...
Click to collapse
no thank god i didnt lose any thing and the OS is operating normal
i really appreciate that mate
and lesson well learned i'm making folder in the sdcard for buck up stuff
cheers ^_^
Hi,
I've looked through a lot of threads but can't match the symptoms to mine (this could be a lack of knowledge on my part) so any help is appreciated.
I've previously flashed ARHD a number of times successfully including a new boot image. I flashed 9.2 today with CD Tools Suite and this was fine. I later decided that I wanted to re-flash without the CD Suite Tools and did this by going into recovery and re-flashing the ARHD zip.
The update ran successfully (per CWM) but I can't boot into it. All I get to is the HTC One white screen with a beats audio logo beneath it. I also can't get the phone to reboot into flashboot / recovery so that I can do anything with it (I've tried holding the power button and either vol up or down but this just reboots the phone and it goes back to the white screen again).
I'm sure there is a way out of this. Could anyone please help me?
Many thanks.
Hi, you wrote,
I later decided that I wanted to re-flash without the CD Suite Tools and did this by going into recovery and re-flashing the ARHD zip.
Click to expand...
Click to collapse
Did you use fastboot to flash the correct boot.img file first? It's my understanding that anytime you flash a rom you must flash via fastboot the correct boot.img file for that rom followed by erasing cache before entering recovery and flashing the rom.
Didn't someone say holding volume up & power can brick your phone?
Fastboot is volume down & power.
Press them at the exact same time, keep them held till fastboot loads up (even if it does another reboot)
Sent from my HTC One X using Tapatalk 2
phase sdeyou
Bit Banger said:
Hi, you wrote,
Did you use fastboot to flash the correct boot.img file first? It's my understanding that anytime you flash a rom you must flash via fastboot the correct boot.img file for that rom followed by erasing cache before entering recovery and flashing the rom.
Click to expand...
Click to collapse
They both use the same boot image so no need to re-flash that.
chrisjcks said:
keep them held till fastboot loads up (even if it does another reboot)
Click to expand...
Click to collapse
This was the key for me. It rebooted a couple of times then went into fastboot.
Thank you very much!
Hello,
Last night i unlocked the bootloader and installed custom recoverey to install cynogen mod 10.1.After successful install of cynogrn mod 10.1 and gapps phone hangs at HTC logo i have flashed it about 5 times but still stuck at htc logo..I have somewhere that wrtiting boot.img file will solve the problem but i dont know how to write this file via fast boot or any other method...SO can any body suggest me any solution or at least tell me how to write boot.img file.
Regards,
Muneeb
MUNEEB_AKHTAR_RAZA said:
Hello,
Last night i unlocked the bootloader and installed custom recoverey to install cynogen mod 10.1.After successful install of cynogrn mod 10.1 and gapps phone hangs at HTC logo i have flashed it about 5 times but still stuck at htc logo..I have somewhere that wrtiting boot.img file will solve the problem but i dont know how to write this file via fast boot or any other method...SO can any body suggest me any solution or at least tell me how to write boot.img file.
Regards,
Muneeb
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2225405
Read this and flash boot.img inside cyanogenmod zip file that you download and installed on phone! Put boot.img from cyanogenmod.zip to extracted folder from link above.
To put phone to fastboot mode press volume down and power button in the same time and hold volume button until phone startup in hboot than select fastboot!
Good luck!
hpnxfox said:
http://forum.xda-developers.com/showthread.php?t=2225405
Read this and flash boot.img inside cyanogenmod zip file that you download and installed on phone! Put boot.img from cyanogenmod.zip to extracted folder from link above.
To put phone to fastboot mode press volume down and power button in the same time and hold volume button until phone startup in hboot than select fastboot!
Good luck!
Click to expand...
Click to collapse
Thanks for the detailed instructions....But after writing the boot.img file phone still hang at htc logo..
This phone is now semi brick for me,If you dont mind can u please tell me the whole procedure from start to end becaz maybe i m doing something wrong.
First time i root my one x for installing custom rom but everything gone wrong...
MUNEEB_AKHTAR_RAZA said:
Thanks for the detailed instructions....But after writing the boot.img file phone still hang at htc logo..
This phone is now semi brick for me,If you dont mind can u please tell me the whole procedure from start to end becaz maybe i m doing something wrong.
First time i root my one x for installing custom rom but everything gone wrong...
Click to expand...
Click to collapse
Are you sure that you have One X international with quad core tegra3 or AT&T dual core One X?
And maybe this guide http://forum.xda-developers.com/showthread.php?t=2069904 and all in one toolkit http://androidfiles.org/hasoon2000/...(International)/One_X_All-In-One_Kit_v2.4.rar is better solution for you ! Just take your time!
And just to mention, to flash and use CM10.1 you need Hboot that supports Jelly Bean because CM is based on 4.2.2 jelly bean - you need hboot 1.34 or above i think (1.39 is latest)
Wiping
Hey
Are you sure you have flashed the right boot image on the right way? (fastboot flash boot boot.img)
If yes, try wiping all of your cache, Dalvik cache, and do a factory/data reset (can be found all 3 at CWM Recovery)
Let me know soon!
Hi all
Finally got round to rooting my xperia s and unlocking bootloader with view to installing 4.4.4
Everything has gone fine to the point i tried to install a recvoery
First tried to install TWRP recovery which install went fine but i couldnt get phone in to recvoery so i then installed clockwork mod recovery and still cant get phone in to recvoery.
I installed ROM manager and it shows under recvoery already installed clockworkmod recvoery & TWRP recovery but even when i select boot in to recovery from that phone just turns on as normal.
Have tried holding volume up/down button on sony flash but no good
Have tapped screen when sony logo showing and phone just seems to lock
Anyone got any ideas what i can do?
Thanks
freejack2k said:
Hi all
Finally got round to rooting my xperia s and unlocking bootloader with view to installing 4.4.4
Everything has gone fine to the point i tried to install a recvoery
First tried to install TWRP recovery which install went fine but i couldnt get phone in to recvoery so i then installed clockwork mod recovery and still cant get phone in to recvoery.
I installed ROM manager and it shows under recvoery already installed clockworkmod recvoery & TWRP recovery but even when i select boot in to recovery from that phone just turns on as normal.
Have tried holding volume up/down button on sony flash but no good
Have tapped screen when sony logo showing and phone just seems to lock
Anyone got any ideas what i can do?
Thanks
Click to expand...
Click to collapse
Which ROM are You trying to flash? If it is a Kitkat ROM as You mentioned, then first copy the ROM and gapps to phone for flashing purposes .
Now, on PC, extract the boot.img from rom zip and flash it via fastboot. Then flash the ROM via twrp which would be installed from that boot.img!
Mirhawk said:
Which ROM are You trying to flash? If it is a Kitkat ROM as You mentioned, then first copy the ROM and gapps to phone for flashing purposes .
Now, on PC, extract the boot.img from rom zip and flash it via fastboot. Then flash the ROM via twrp which would be installed from that boot.img!
Click to expand...
Click to collapse
Thanks m8
Could you tell me what i should type in command prompt for fastboot of the boot.img
Thanks
freejack2k said:
Thanks m8
Could you tell me what i should type in command prompt for fastboot of the boot.img
Thanks
Click to expand...
Click to collapse
First connect Your phone to pc. Then type this command:
Code:
adb reboot bootloader
Then Your phone will reboot in fastboot mode(The blue led would be lit.)
If the blue led does not lit up, then disconnect Your phone, power it off. The press volume up button and connect the phone the pc. The phone will have the blue led now.
Then type following command to flash the boot.img:
Code:
fastboot flash boot boot.img
Do note copy the ROM.zip to phone first and then perform above steps.
Mirhawk said:
First connect Your phone to pc. Then type this command:
Code:
adb reboot bootloader
Then Your phone will reboot in fastboot mode(The blue led would be lit.)
If the blue led does not lit up, then disconnect Your phone, power it off. The press volume up button and connect the phone the pc. The phone will have the blue led now.
Then type following command to flash the boot.img:
Code:
fastboot flash boot boot.img
Do note copy the ROM.zip to phone first and then perform above steps.
Click to expand...
Click to collapse
Well did that and phone will now only boot to Sony image and just sits on it.
Still cant get in to recovery but can get in to flash mode so tried reflashing this and original firmware but no matter what it just sticks on Sony and wont boot any further than that.
Looks like i got a brick :crying:
freejack2k said:
Well did that and phone will now only boot to Sony image and just sits on it.
Still cant get in to recovery but can get in to flash mode so tried reflashing this and original firmware but no matter what it just sticks on Sony and wont boot any further than that.
Looks like i got a brick :crying:
Click to expand...
Click to collapse
You must have not flashed the rom after flashing the boot.img. That's why it used to get stuck on boot logo of Sony. The kernel(boot.img) of any Kitkat ROM won't with JB ROM as far as I know.
Don't worry, there is still hope since You can at least get it to boot up halfway.
That flashing the original ftf is weird. Are You sure the ftf file is proper? Try downloading a new one. or if You were able to successfully able to flash the original firmware according to flashtool, try flashing it again using Sony Update Service(SUS). Can't guarantee the SUS will work or not.
Mirhawk said:
You must have not flashed the rom after flashing the boot.img. That's why it used to get stuck on boot logo of Sony. The kernel(boot.img) of any Kitkat ROM won't with JB ROM as far as I know.
Don't worry, there is still hope since You can at least get it to boot up halfway.
That flashing the original ftf is weird. Are You sure the ftf file is proper? Try downloading a new one. or if You were able to successfully able to flash the original firmware according to flashtool, try flashing it again using Sony Update Service(SUS). Can't guarantee the SUS will work or not.
Click to expand...
Click to collapse
Got it all up and running again!!
Used to update service (emma think it was called) and got phone to install recovery then got in to recovery and installed kitkat.
Very happy
Thanks for all the help folks
Mirhawk said:
First connect Your phone to pc. Then type this command:
Code:
adb reboot bootloader
Then Your phone will reboot in fastboot mode(The blue led would be lit.)
If the blue led does not lit up, then disconnect Your phone, power it off. The press volume up button and connect the phone the pc. The phone will have the blue led now.
Then type following command to flash the boot.img:
Code:
fastboot flash boot boot.img
Do note copy the ROM.zip to phone first and then perform above steps.
Click to expand...
Click to collapse
Hello.
I'm trying to get this **** working as well, but even though it seems like you gave some crystal clear instructions I still manage to not understand it. I unlocked the bootloader on my S and downloaded. All I really wanted to do was get a good 4.4 ROM running, any chance you could toss an idiot some help?
From what I understand:
1. copy the ROM zip-file over to phone
2. connect phone to pc and fastboot it
3. flash the boot.img from the rom zip-file
4. flash the ROM (how?)
I did a quick google on twrp but don't quite understand what I need it for or if I need it.
EDIT: After a bit of looking, apparently the ROM I'm looking to flash (Paranoid Android) installs twrp when you flash the boot.img. Just in case that changes anything.
Brick?
Hi. So I just tried to flash the boot.img from the latest Paranoid Android, got 0 errors or bad blocks, succesful flash according to cmd. I did fastboot reboot as the guide here says: http://forum.xda-developers.com/showthread.php?t=1526866
LED notification goes pink for a few seconds, I get the Sony logo then just an infinite black screen. Left it on for about 15 minutes with no success. I tried force rebooting/shutting it down with volup+power for 5/10 seconds, but both of them just result in the phone getting instantly turned back on and going pink LED->Sony logo->black screen. This means I can't (from what I can tell anyway) boot into fastboot (vol-up+connect to USB does nothing, vol-down+connect to USB gets me a green LED for a few seconds but then goes over to pink LED, Sony logo and then black screen).
I would really appreciate any kind of help right now, even just advice on how to turn this phone off would be fantastic, because right now that also seems impossible.
Adyzz said:
Hello.
I'm trying to get this **** working as well, but even though it seems like you gave some crystal clear instructions I still manage to not understand it. I unlocked the bootloader on my S and downloaded. All I really wanted to do was get a good 4.4 ROM running, any chance you could toss an idiot some help?
From what I understand:
1. copy the ROM zip-file over to phone
2. connect phone to pc and fastboot it
3. flash the boot.img from the rom zip-file
4. flash the ROM (how?)
I did a quick google on twrp but don't quite understand what I need it for or if I need it.
EDIT: After a bit of looking, apparently the ROM I'm looking to flash (Paranoid Android) installs twrp when you flash the boot.img. Just in case that changes anything.
Click to expand...
Click to collapse
No worries! If You were able to perform upto step no.3 properly, then when You boot into twrp(Press volume up button 2-3 times while booting up), there is an option there called as "Install". In that You select the zip file of the ROM and slide the bar to install it!
Mirhawk said:
No worries! If You were able to perform upto step no.3 properly, then when You boot into twrp(Press volume up button 2-3 times while booting up), there is an option there called as "Install". In that You select the zip file of the ROM and slide the bar to install it!
Click to expand...
Click to collapse
Holy **** this might have just done it! It wasn't actually twrp but CWM I believe, but I did manage to successfully flash the ROM. Seems to be working as of right now so fingers crossed and a massive thank you!
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Thanks bro. Really helpful!
HI i got the new update ANDROID 6.0 MARSHMALLOW after i download successfullly when i prress restart and install .................it starts installing for few seconds then it gives error with dead android logo ....and restarts after some time and then it tells to download the update again ....i tried 3 times results were still the same every time...please help
also tried to side load manually.... ANDROID 6.0 ...after i click apply from sd card when it shows verifying system then it gives an error aborts the update ...and shows this
{system/priv-app/prebuiltgmscore.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
(MY PHONE IS NEVER ROOTED OR FLASHED OR HACKED)
(MY IS COMPLETELY CLEAN)
please help...
It means now u r on stock lollipop so root ur device and flash custom rom like cm12.1 and njiy
Sent from my Micromax AQ4501 using XDA Free mobile app
mashoodmasst said:
HI i got the new update ANDROID 6.0 MARSHMALLOW after i download successfullly when i prress restart and install .................it starts installing for few seconds then it gives error with dead android logo ....and restarts after some time and then it tells to download the update again ....i tried 3 times results were still the same every time...please help
also tried to side load manually.... ANDROID 6.0 ...after i click apply from sd card when it shows verifying system then it gives an error aborts the update ...and shows this
{system/priv-app/prebuiltgmscore.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
(MY PHONE IS NEVER ROOTED OR FLASHED OR HACKED)
(MY IS COMPLETELY CLEAN)
please help...
Click to expand...
Click to collapse
No need to root just unlock bootloader ,download Zip file of marshmallow .press power button+volume up for 3 sec,select apply update Zip and select that Zip file and that it .if any problem faced ping me.
Rexspidy said:
No need to root just unlock bootloader ,download Zip file of marshmallow .press power button+volume up for 3 sec,select apply update Zip and select that Zip file and that it .if any problem faced ping me.
Click to expand...
Click to collapse
If you done above steps that mean your build no. Is not appropriate for update update lolipop 5.1.1 to latest lolipop .
Mr problem is solved
Thank you all of you...I have successfully flashed my phone from Lollipop 5.1.1 to lollipop 5.1. After that within half-hour I got the update to marshmallow... Now I have nothing to worry about... Except one problem battery drains faster than usual. And heats alot...
So I switch my phone off for a while to cool down.,.. Thank you
mashoodmasst said:
Thank you all of you...I have successfully flashed my phone from Lollipop 5.1.1 to lollipop 5.1. After that within half-hour I got the update to marshmallow... Now I have nothing to worry about... Except one problem battery drains faster than usual. And heats alot...
So I switch my phone off for a while to cool down.,.. Thank you
Click to expand...
Click to collapse
Battery problem is çommon issue of marshmallow but your device is heating also take a serious look on thàt .by the battery problem will be solved on next update I hope and don't worry after using 2 weeks of the phone battery will automatically stable.
Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
Didn't work for me
AAB4K said:
Didn't work for me
Click to expand...
Click to collapse
What error is coming still the dead logo??
Sent from my Micromax AQ4501 using XDA-Developers mobile app
Facing same issue, dead logo. Am on MM 6.0.1. April securty patch not getting installed. tried downloading zip and installing manually. still no luck.
error showing is
{system/priv-app/calendargoogleprebuilt.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
stock rom. not rooted
Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
If not wrong ur are missing something..
After dead android logo u have to press power button and then volume (up/down) didn't remembered exactly. Then only u will be taken to recovery mode. if on stock recovery
Other wise hitting recovery button only will take u to ur custom recovery.
Sent from my sprout4 using XDA Labs
harsh. said:
If not wrong ur are missing something..
After dead android logo u have to press power button and then volume (up/down) didn't remembered exactly. Then only u will be taken to recovery mode. if on stock recovery
Other wise hitting recovery button only will take u to ur custom recovery.
Sent from my sprout4 using XDA Labs
Click to expand...
Click to collapse
I hope that part how to go to revory known to all ,So I skip it.After Marshmallow first update it does not matter you are in Stock Rom or Custom Rom ,there will be no custom Recovery mode however how hard you try to flash CWM or TWRP .I tried in 3 handset,all given same result .So, I mention how to get to Custom Recovery in an optional way.
Rexspidy said:
I hope that part how to go to revory known to all ,So I skip it.After Marshmallow first update it does not matter you are in Stock Rom or Custom Rom ,there will be no custom Recovery mode however how hard you try to flash CWM or TWRP .I tried in 3 handset,all given same result .So, I mention how to get to Custom Recovery in an optional way.
Click to expand...
Click to collapse
I have rooted 2 Android one device after marshmallow. no problems at all.
using adb and unlocking Boot loader. But you have to reboot to recovery after flashing it.before rebooting system
Sent from my sprout4 using XDA Labs
harsh. said:
I have rooted 2 one device after marshmallow. no problems at all.
using adb and unlocking Boot loader. But you have to reboot to recovery after flashing it.before rebooting system
Sent from my sprout4 using Labs
Click to expand...
Click to collapse
Thats Quite interesting ,it never worked for me although I reboot in recovery first then system.After rebooting system whenever I tried Recovery mode I end up with stock recovery.Maybe some problem with flashing.
Rexspidy said:
Thats Quite interesting ,it never worked for me although I reboot in recovery first then system.After rebooting system whenever I tried Recovery mode I end up with stock recovery.Maybe some problem with flashing.
Click to expand...
Click to collapse
After 1st reboot do you get cwm Or twrp?
Sent from my sprout4 using XDA Labs
harsh. said:
After 1st reboot do you get cwm Or twrp?
Sent from my sprout4 using XDA Labs
Click to expand...
Click to collapse
Thats little funny, got dead android only.
Rexspidy said:
got dead android only.
Click to expand...
Click to collapse
It means u have not flashed recovery correctly.
if you need any help, PM me
or just reply me in thread only . (^~^)
Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
LOL
When you see android bot logo, you are in recovery mode. But recovery menu options are hidden.
After you see the dead bot logo, hold power up for 5 seconds and then hit vol up (or hold both for 5 seconds) All recovery options will be visible after this.
Its a bad idea to use a pc every time you want to boot into recovery LOL
Hi guyz can anyone provide me stock recovery.img of build no. MOB30N PLZZ