[Q] Questionable Kernel - EVO 4G Q&A, Help & Troubleshooting

Trying to flash a Mason G v.15rc4 (onto/into?) The Emilio Unchained V 2.0 and just gets stuck in the splash screen (not boot animation) (no bootloops). This happens on a lot of ROMS, but how come?
Sent from my PC36100 using xda app-developers app

The kernel may not compatible with the roms you are flashing
Sent from my PG06100

It appears as though the ROM you're using utilizes the Mason kernel, just a slightly different one than what you're using. Probably not worth the change, really.
The advice is free....the bandwidth, not so much

Just missing the wheatley governor I guess. That was my only reason.
Sent from my PC36100 using xda app-developers app

Flashdot said:
Just missing the wheatley governor I guess. That was my only reason.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
My OG EVO never ran good with Wheatley. Always ran SmartassV2.
The advice is free....the bandwidth, not so much

FinZ28 said:
My OG EVO never ran good with Wheatley. Always ran SmartassV2.
The advice is free....the bandwidth, not so much
Click to expand...
Click to collapse
Same here. I'm not sure what that ROM is, (GB, ICS, JB) But you get that the Mason Kernels, G = Gingerbread, I = ICS and neither work with JB

HipKat said:
Same here. I'm not sure what that ROM is, (GB, ICS, JB) But you get that the Mason Kernels, G = Gingerbread, I = ICS and neither work with JB
Click to expand...
Click to collapse
I had never heard of it until I looked in development and saw it. It's based on the most recent CM7.2 nightly, though.
The advice is free....the bandwidth, not so much

http://forum.xda-developers.com/showthread.php?t=1736168]Governor's Explained
Wheatley is #23, but over all a good post on governors and how they work.
Sent from my PC36100 using xda app-developers app
———————Edit———————
Just realized you guys are talking about the rom I'm using
The.Emilio Unchained V.2
It's a tweaked, but basically vanilla rom. I use it to add all kinds of stuff to it like the newest Bravia engine 2 that dieselford put up on Kendall's jellybread thread. Also throw a bunch of build.prop tweaks in as well. The only thing missing now is my little wheatley

Flashdot said:
http://forum.xda-developers.com/showthread.php?t=1736168]Governor's Explained
Wheatley is #23, but over all a good post on governors and how they work.
Sent from my PC36100 using xda app-developers app
———————Edit———————
Just realized you guys are talking about the rom I'm using
The.Emilio Unchained V.2
It's a tweaked, but basically vanilla rom. I use it to add all kinds of stuff to it like the newest Bravia engine 2 that dieselford put up on Kendall's jellybread thread. Also throw a bunch of build.prop tweaks in as well. The only thing missing now is my little wheatley
Click to expand...
Click to collapse
Dude, good link, but I think mine in my signature is the only one for CPU Governors that's updated

Aaaaahhhhhh Google you failed me again.
Sent from my PC36100 using xda app-developers app

I'm using jelly belly omega with a flashed mason kernel el 0.1.5 RC5. Wheatley works, along with great functionality, but it causes the stock camera to fc.
Sent from my PC36100 using xda app-developers app

Gallery works also. Just no camera.. disappointing. This ROM also has a lot of tweaking capabilities. Its in android development
Sent from my PC36100 using xda app-developers app

Related

CM7 sleep problem.

Checked my up time and it's identical to my total on time. Checked partial wake usage and no rogue apps that I see. What could he the cause of my problem?
Sent from my PC36100 using XDA App
Bump
10 char.
Sent from my PC36100 using XDA App
Please dont bump your own post an HOUR after you posted...
Give us some more details, when did you flash? How did you flash? Have you installed any apps lately?
My fault. Sorry. I'm running that CM7 19 VERSION. I am using the red theme from the market. I can't use juice defender simply cause it doesn't support gingerbread yet. I'm using 60676 prl. Can't even find the pri but I'm assuming it's still 1.77 unless cm came with 1.9.
Flashed it 24 hours ago. Haven't switched kernals cause I have had horrible experience with anything other than stock with myn's. I reinstalled all my apps and kik messenger is on lockdown with autostarts. So therefore it doesn't eat up partial wake time and doesn't open unless I do it manually.
Sent from my PC36100 using XDA App
Flashed it 24 hours ago.
Click to expand...
Click to collapse
Give any new rom at least 2 days to fully "get settled".
What kernal do you recommend? I'm not too familiar with cm.
Sent from my PC36100 using XDA App
jacoballen22 said:
What kernal do you recommend? I'm not too familiar with cm.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Stock, until you get those issues ironed out. "Stock" sounds lame, but CM7s kernel is far from stock
After that, I use savaged-zen with much success. Though everyone will tell you that kernels behave differently with different phones. Spend a week trying a few for like 2 days at a time and see which one you like the most Also, play with the governor settings (under settings/cyanogenmod settings/performance). I personally use the SZ kernel with the "interactive" governor and find it to be the best balance between speed and battery life.
Interactive all the way man!! DATS DA BEST!
thegregbradley said:
Stock, until you get those issues ironed out. "Stock" sounds lame, but CM7s kernel is far from stock
After that, I use savaged-zen with much success. Though everyone will tell you that kernels behave differently with different phones. Spend a week trying a few for like 2 days at a time and see which one you like the most Also, play with the governor settings (under settings/cyanogenmod settings/performance). I personally use the SZ kernel with the "interactive" governor and find it to be the best balance between speed and battery life.
Click to expand...
Click to collapse
SENT FROM THE BATHROOM AT WORK...
So you think now would be a good time to flash another kernal..like savaged Zen?
Sent from my PC36100 using XDA App
Flash went you want.. I flashed a savaged kernel right away when I flashed the cm7 rom. I always had good experience with savages kernels. I don't even know how good stock works lol..
jacoballen22 said:
So you think now would be a good time to flash another kernal..like savaged Zen?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
SENT FROM THE BATHROOM AT WORK...
Oh hahaha. Cool. Should I make a nand or just get straight to it?
Sent from my PC36100 using XDA App
Always do a backup that's the rule dude! Lol you don't want to start all over do you?? Lol
jacoballen22 said:
Oh hahaha. Cool. Should I make a nand or just get straight to it?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
SENT FROM THE BATHROOM AT WORK...
Well I would have to start over with cm but I get what you're saying. How many backups do you usually keep before you delete them?
Sent from my PC36100 using XDA App
Ha I still have a backup from CM6 lol, one from CM7RC1 and another Cm7rc2 with stock kernel just in case and also have a current one with savagedzen kernel.. I will delete when CM7 becomes stable..lol
jacoballen22 said:
Well I would have to start over with cm but I get what you're saying. How many backups do you usually keep before you delete them?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
SENT FROM THE BATHROOM AT WORK...

Cyanogenmod 7

Ok back to same issue again, now running. Cyanogenmod 7 #37 and camera isn't. Working! !
Sent from my PC36100 using XDA Premium App
You need to be more specific. Like I said, flash nightly 40, the most recent is generally better, for starters.
Idle what's the difference between them nightly # but ima do what u say, and an specific kernel to run with it?
Sent from my PC36100 using XDA Premium App
fdavila17 said:
Idle what's the difference between them nightly # but ima do what u say, and an specific kernel to run with it?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Alright, personally, I use the 3.3.7 kernel; though you'd be fine with the built in kernel.
The difference between the nightly numbers is that the newer ones have more tweaks, and performances enhancers, ect over the old one. The nightly builds upon the old one, to make it better, and generally fix bugs.
So I can't use Netatchy's kernels with it? I'm just trying to get my camera working again
Sent from my PC36100 using XDA Premium App
fdavila17 said:
So I can't use Netatchy's kernels with it? I'm just trying to get my camera working again
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
NO, do not do that.
netarchy = sense kernel
CM7 = AOSP rom
You should never mix the kernel and rom type. aosp rom needs an aosp kernel, and a sense rom needs a sense kernel.
Iight well ok ima try and find out a kernel or something that gets my camera working
Sent from my PC36100 using XDA Premium App
fdavila17 said:
Iight well ok ima try and find out a kernel or something that gets my camera working
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
The equipped kernel or Tiamat will be fine. I'm on nightly 40, on 3.3.7 as I stated, no issues.
Man I tried to Flash #40 it keep saying Aborted and stuff idk what's wrong man, what do u think about mikfroyo?
Sent from my PC36100 using XDA App
N40 was messing up for a lot of people. DL #39 or #41.
jstalford said:
N40 was messing up for a lot of people. DL #39 or #41.
Click to expand...
Click to collapse
40 worked fine for me personally. 41 gave me problems...xD Just high battery drainage. But yes, download between 39-41.
fyi, the nightly builds should be more for people who know more about programming, they are test builds where they are expected not to work correctly. the CM RC are mostly worked out with few glitches, and CM STABLE shouldnt have any problems, if you are new to development i would suggest to stay to RC or Stable....

[Q] What Kernel Is Compatible With AOKP JellyBean "Nightly"?

Just like the title stated, what kernel is compatible with AOKP JellyBean "Nightly" that will let me overclock my processor?
Ktoonez kernel is great. Has knots of schedulers and overclock up to 2.1ghz..my s3 has had no problem staying at those speeds for some time. Lean kernel is also good but I got random reboots with it. That one has very few schedulers and can oveclock up to 1.9 GHz. There are 2 more kernels for AOSP android. Check them out
Sent from my SGH-T999 using xda app-developers app
osmosizzz said:
Ktoonez kernel is great. Has knots of schedulers and overclock up to 2.1ghz..my s3 has had no problem staying at those speeds for some time. Lean kernel is also good but I got random reboots with it. That one has very few schedulers and can oveclock up to 1.9 GHz. There are 2 more kernels for AOSP android. Check them out
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Can you please proved me with the links to these kernel, because most of there kernel are for the AT&T and Sprint Version not the T-Mobile one.
Thanks.
Its in the original dev section that is in the sub forum for the TMobile SGS III
http://forum.xda-developers.com/showthread.php?t=1871946
Sent from my SGH-T999 using xda premium
Thanks for the link, however when I flashed it I cant seem to be able to able to overclock my processor, it is stuck at 1512mhz.
Also, I did download the Jelly Bean version of the kernel, the on and after 10/14 since my Rom was released on 10/21.
There is an app called KTweaker in there click on general and you should see the option enable oc options.
Sent from my SGH-T999 using xda premium
mt3g said:
There is an app called KTweaker in there click on general and you should see the option enable oc options.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thank you, now I can overclock.

moved

please close
Btw alcohol was used to create this. Might be flammable.
Awesome, is there a slight rundown of what this has to offer over stock?
well, it may or may not be faster/more battery life. its a test kernel to find build method and make sure things are going to work before putting 1000s of lines of code changes in
Sounds good. Flashing now, will test as much as I can.
Will test also thanks
Sent from my LG-LS970 using xda app-developers app
How's the tests going? How risky is this?
Sent from my LG-LS970 using xda premium
So far it seems to be running well. Run Quadrant and it is using Eco mode as my scores varied by 2000. Don't care about scores just the feel.
The governor is ondemand and uses 1134 alot more. Which is nice not seeing 1512 mostly so battery should be better.
Do have a question though. Do you want us to test different governors? If so, what's the preferred program?
Thanks joker!! It's great to finally have a kernel to play with!!
edit. Decided to use Set CPU. Seems to be working fine. I take that back about using 1134. Guess it just happened to be the speed of choice by what I was running. Still mostly 384 and 1512. And of course Deep sleep
This has worked fine in my testing Bluetooth steaming and calls work without issue. Camera works so does WiFi. I still see the msm host wake lock but it's not that high. Got 20 thousand in antutu so it seems to work without issue.
engine95 said:
So far it seems to be running well. Run Quadrant and it is using Eco mode as my scores varied by 2000. Don't care about scores just the feel.
The governor is ondemand and uses 1134 alot more. Which is nice not seeing 1512 mostly so battery should be better.
Do have a question though. Do you want us to test different governors? If so, what's the preferred program?
Thanks joker!! It's great to finally have a kernel to play with!!
edit. Decided to use Set CPU. Seems to be working fine. I take that back about using 1134. Guess it just happened to be the speed of choice by what I was running. Still mostly 384 and 1512. And of course Deep sleep
Click to expand...
Click to collapse
I didnt do anything to the govenors on this release. This is mainly a basic kernel close to stock with a couple tweaks.
bizzshow26 said:
This has worked fine in my testing Bluetooth steaming and calls work without issue. Camera works so does WiFi. I still see the msm host wake lock but it's not that high. Got 20 thousand in antutu so it seems to work without issue.
Click to expand...
Click to collapse
It won't get rid of wake locks. They do have a purpose, but it should reduce them. Hopefully
Sent from my LG-LS970 using xda app-developers app
Flashed no problems. Chuckled at "raping malware" and "licking ICS." We'll see what happens after it settles in over a few days.
Sent from my LG-LS970 using Tapatalk 2
So far everything seems to be going well. No stability issues, camera and WiFi work fine, everything runs smoothly. Though its hard to see if this runs better or not since it ran pretty well from stock.
Woohoo! Good to see you back Joker! I was a religious follower in the MoPho forums. I don't post very often but I just wanted to say it's good to see you and I can't wait to see what you do with this ridiculously powerful phone.
Re: jokers kernels 1/17/13
tested the oc kernel and its actually works well except WiFi is broken and can't OC,
just posting info for the dev
Sent from my LG-LS970 using xda app-developers app
Re: jokers kernels 1/17/13
sharkboy0901 said:
tested the oc kernel and its actually works well except WiFi is broken and can't OC,
just posting info for the dev
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I never released the kernel, but yeah I reverted those oc's and decided to handwrite it. Plus I wanted to update stockish.
So Dont use octest1. It was a test.
Sent from my LG-LS970 using xda app-developers app
Re: jokers kernels 1/17/13
jokersax11 said:
I never released the kernel, but yeah I reverted those oc's and decided to handwrite it. Plus I wanted to update stockish.
So Dont use octest1. It was a test.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Sorry hahaha couldn't help myself I'm a flashaholic
A question:
What's the point of the UC kernel if one can just lower clock speeds on OC kernel and stockish kernel?
Sent from my LG-LS970 using xda app-developers app
sharkboy0901 said:
Sorry hahaha couldn't help myself I'm a flashaholic
A question:
What's the point of the UC kernel if one can just lower clock speeds on OC kernel and stockish kernel?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
The gpu/avp/mem/cpu/etc etc will be underclocked and undervolted. sort of a "hey we have way way to much phone and everything is designed for slower crap anyways so lets also go slow" kinda kernel
Re: jokers kernels 1/17/13
Because these kernels also have libs in the zip, are we OK to just move kernel to kernel?
Sent from my LG-LS970 using xda premium
engine95 said:
Because these kernels also have libs in the zip, are we OK to just move kernel to kernel?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
yes
Re: jokers kernels 1/17/13
Been on it since last night and its going good , great battery life increase. Still seeing about 40 minute of msm wake lock since being unplugged 7 hours. Thanks !
Sent from my LG-LS970 using xda app-developers app

What do you run on YOUR s3

First let me say this. This thread is NOT a what rom is best. This is just to see what everyone runs on there phone.
I run liquid smooth RC1 with ktoonsez kernel.
Sent from my SGH-T999 using xda app-developers app
Infamous 4.5
I am running Darthstalker XI with stock kernel and sometimes I switch over to Deviant and Xone kernels to compare battery life.
Leaked stock rom 4.2.1
Sent from my GT-I9300 using xda app-developers app
tmjohnsonfse said:
I am running Darthstalker XI with stock kernel and sometimes I switch over to Deviant and Xone kernels to compare battery life.
Click to expand...
Click to collapse
Which one gives you better life?
Sent from my SGH-T999 using xda premium
Carbon 4.2.2 with the kernel it comes with
MrDannyD said:
Leaked stock rom 4.2.1
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Where did yu get that
Sent From My GSIII
ddizzy81 said:
Where did yu get that
Sent From My GSIII
Click to expand...
Click to collapse
I think hes international version
Sent from my SGH-T999 using Tapatalk 2
charlieb620 said:
Which one gives you better life?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
So far I think staying stock is just as good as running a developed kernel for this particular ROM imho, especially when you want to get the most battery. I use SetCPu and will run min 486 and Max 1350/1404. SmartassV2 and Zen or cfq governors. I don't play many games on my phone, I have tablets for that and they are tweaked as high as I can go and be stable. It's all about what you use your phone for, most times when I benchmark it seems the higher frequency I push my score actually will get worse, might be I'm need to up my voltage, but I don't mess with voltages much. I will follow the developers guidelines for undervolting if I'm trying to squeeze that extra life, but I don't worry about it that much. Best way for me to extend my battery life is start turning things off when they're not needed. All the things I try with my devices I have learned by reading on the XDA forums, and by far the developers for our GS3's are the best and I'm very thankful for all they give up to give us these awesome roms, kernels, and not forgetting about the theme developers to make or phones run fast, operate smoothly, and look great. Without them might as well buy a fruit product, just kidding I would get a flip phone before I would do that. .... This was meant to be a quick reply, just got off a 14 hr work day and I'm just rambling a little, I hope my reply makes sense.
Sent from my AT100 using xda premium
Stock 100000000000%
Sent from my Nexus 7
Stock debloated
Sent from my SGH-T999 using Tapatalk 2
ddizzy81 said:
Where did yu get that
Sent From My GSIII
Click to expand...
Click to collapse
Sammobile
http://www.sammobile.com/2013/02/22...iii-android-4-2-1-jelly-bean-leaked-firmware/
Sent from my GT-I9300 using xda app-developers app
PAC Man rom
Sent from my SGH-T999 using xda app-developers app
atlprettygirl2145 said:
PAC Man rom
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Absolutely Luv it
AOKP
tmjohnsonfse said:
So far I think staying stock is just as good as running a developed kernel for this particular ROM imho, especially when you want to get the most battery. I use SetCPu and will run min 486 and Max 1350/1404. SmartassV2 and Zen or cfq governors. I don't play many games on my phone, I have tablets for that and they are tweaked as high as I can go and be stable. It's all about what you use your phone for, most times when I benchmark it seems the higher frequency I push my score actually will get worse, might be I'm need to up my voltage, but I don't mess with voltages much. I will follow the developers guidelines for undervolting if I'm trying to squeeze that extra life, but I don't worry about it that much. Best way for me to extend my battery life is start turning things off when they're not needed. All the things I try with my devices I have learned by reading on the XDA forums, and by far the developers for our GS3's are the best and I'm very thankful for all they give up to give us these awesome roms, kernels, and not forgetting about the theme developers to make or phones run fast, operate smoothly, and look great. Without them might as well buy a fruit product, just kidding I would get a flip phone before I would do that. .... This was meant to be a quick reply, just got off a 14 hr work day and I'm just rambling a little, I hope my reply makes sense.
Sent from my AT100 using xda premium
Click to expand...
Click to collapse
It makes sense...
I'm running Synergy right now with faux. Uv - 50 1134 386 with intellidemand and deadline io. Been getting good battery life.
Been looking over the att threads I'm about to try one of their roms since there are a couple with a little more tweaks that also include multi Window plus other goodies.
Sent from my SGH-T999 using xda premium
Wicked v8 with xone dx kernal
Sent from my SGH-T999 using xda app-developers app
Liquidsmooth RC2 at the moment and if i feel nostalgic, I pop back with Frosty JB.
Liquidsmooth RC2 with stock kernel.
just got running sons of android this morning. my fallback is paranoid android 2.54, but i like to try all the new roms, so i reflash often
p.s. sons of android is running nicely

Categories

Resources