Related
I've tried the following ROM and I ended up using ArpegGioMod 0.8 with Link2SD now.
SimplyGio 1.3
CyanogenMod 7.1 KANG (RC-3.0)
Cy4noobsMod-7.1.3.1
ArpegGioMod 0.8
I'm using cyan kang RC 3.0, phiexz
little confuse,, However still remembering my former rom, Particle, by hyriand
the former has wifi problem, but the music player n effect was excellent, and also no problem, except mount warning issue...
the RC 3.0 I'm using now is promoted to be having wifi worked,,,
but I never found this rom that way, Im stucked to decide which way should I...
hi, what about your rom,,,
can u describe and tell about those following roms by your opinion???
SimplyGio 1.3
Pretty stable and supports other language, my dad has been using it on his Gio for over a month now.
CyanogenMod 7.1 KANG (RC-3.0)
I had some issue with GPS and split camera screen, other than that it has been pretty good and I used it for about 3 weeks between RC2 and 3. I'll probably go back to this again later.
Cy4noobsMod-7.1.3.1
Had some issue with market and S2E but didn't spend too much time on this ROM.
ArpegGioMod 0.8
Having some problem with Link2SD now and I'll try the 0.8.1.1 boot and dtapps2sd later.
I'm choosing between ArpegGioMod and CM 7.1 RC3 depending on what dtapps2sd is like on the ArpegGioMod.
For your wifi problem, did you load the modem file when you load the Particle ROM?
I am using CyanogenMod 9
Im am using Cyanogenmod 7.2 because in Cyanogenmod 9 im stuck in Bootloop every time i try (i probably tryed it more than 10 times)
PS: Sorry for my bad english, im from Germany
CM 7.2, FTW
Im using te BNC rom
Sent from my Gio GT-S5660M using XDA App
Walter1997 said:
Im am using Cyanogenmod 7.2 because in Cyanogenmod 9 im stuck in Bootloop every time i try (i probably tryed it more than 10 times)
PS: Sorry for my bad english, im from Germany
Click to expand...
Click to collapse
Germany and M model ??
Tried wiping data, mount system before etc??
Sent from my GT-S5660 using xda premium
I've had success with cm7.2, cm9 and arpegiomod.
I am currently using cm7.2 because it's the one I find to be the most stable of the bunch. CM9 is quickly catching up though, looking forward to using it full-time in the near future
I'll be making one...
I've used:
Cm7.1 didn't use very long
Cm7.2 most stable custom ROM for me
ArpegGioMod 0.8 best ROM based on stock for M.
Particle ROM worked great for me as long as you preserve your baseband. Second best stock ROM for M. Kernel works great for overclocking and scripts.
Sent from my GT-S5660M using XDA App
I use this ...
particle.blurringexistence.net/samsung-gt-s5660/roms
I'm now using GioPro v1.4 and yesterday I've used CM9..
CM9 is good enough, but the battery life isn't so good..
GioPro 1.4, but I'm going back to SimpliGio, or maybe see if I can get CM7 or CM9 working.
The problem is, I was a newb and flashed by modem. Now I can't connect to Virgin/Bell (ie no SMS, phone calls, nothing).
Anybody know where I can either get a stock modem for the GT-S5660m or stock firmware for it and extract the modem? Most of the "official" firmwares I've seen have been for the non-m model only.
Go to sammobile.com
Sent from my GT-S5660 using xda premium
voetbalremco said:
Go to sammobile.com
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
In Firmwares, right?
I only see for the GT-S5660 non-M model. And a GT-S5660V version? What's that?
Edit: Nvm, it's for Oceania.
If you see regular thread, search for something with MUG baseband, its also for M model
Sent from my GT-S5660 using xda premium
If you see regular thread, search for something with MUG baseband, its also for M model,
Sent from my GT-S5660 using xda premium
I don't entirely understand your post. Do you mean search the site itself or the forum?
And what, exactly, would I search? "MUG baseband"?
Should I just make a new topic? Don't want to take over this thread...
Also, my phone is confused. I just tried flashing the GT-S5660 firmware at sammobile, and my phone shows it as being GT-S5660L. Is that because of the firmware or is that really my model number?
I meand to say this
[25.07.2011][Android 2.3.4]
http://forum.xda-developers.com/sho...[ROM] S5660MUGKG3 [25.07.2011][Android 2.3.4]
This is a stock rom for s5660m, newest if im not wrong
Sent from my GT-S5660 using xda premium
I use CM9 custom rom on my Galaxy Gio is it ICS but I wanna try out the Jelly Bean so I tried some version of new CM 10.1 but it crash because of keyboard did not work.
IMPORTANT
I use cwm recovery
l'm sorry if my english was bad and if there is solution for my broblem I only didin't found it
Sent from my GT-S5660 using xda app-developers app
Before installing any CM rom,you need to wipe data/factory reset first and then flash the rom
I know that but thanks
Sent from my GT-S5660 using xda app-developers app
CM 10.1 by Erickas or by OldDroid.
bogdanwp said:
CM 10.1 by Erickas or by OldDroid.
Click to expand...
Click to collapse
which one is your prefer?
Both are very good , just try them both and see if you prefer one of them
cm10.1 OldDroid in my opinion is the best one very stable and fast is my every day rom, no big problems.
Now I use CM10.1 By Old droid is it
Mega good
Sent from my GT-S5660 using xda app-developers app
user 6230 said:
I use CM9 custom rom on my Galaxy Gio is it ICS but I wanna try out the Jelly Bean so I tried some version of new CM 10.1 but it crash because of keyboard did not work.
IMPORTANT
I use cwm recovery
l'm sorry if my english was bad and if there is solution for my broblem I only didin't found it
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
The most stable JB build is CM10.1 from Erikcas. I suggest to use it.
No reboot at all, with Arco's kernel. Only one shutdown, with testing Yoon Baphomet kernel on RC5. Arco's 3.x kernel never rebooted my wonder.
ICS CM9 RC6
same here,, while waiting for 3.0 kernel chronos,,,, which was still based on sir arne's latest 3.0 kernel,, i use his own kernel,,, and i can say that its flawless,, simple,, yet can be satisfatory for daily usage,,, no randoom reboots whatsoever..
people who said they had problems with this and that maybe
1. had too many apps
2. installed apps from a back up
3. had so many conflicting tweaks/ mods..
R: Use Arco CM9 3.x kernel? No reboot issue? Then write small message here.
I used to have random reboots just when I was using stock GB, then I came to CM9 with beta4 and since then everything is fine! I always go pristine, and to me 3.0 kernel have just improved things, (more performance, less bugs) so I'd say that a stable version should definitely be with 3.0, according to my experience with this rom!
Sent from my GT-I8150 using xda app-developers app
Im always using his kernel for first 3 days I installed CM9/CM10 and no ramdom reboots/dissatisfactories. I am always backing up my litle apps and data then doin a fresh install and the 98% problems are gone. I don't find the reason why people keep reporting these idiotic problem with kernel/random tweaks in arcos thread. Dont be a retard, discuss your problem on your tweaks/mod/kernel thread. Try first fresh install for 2-3 days then start customizing the phone and you'll know what the main reason of your problem. Once again, dont be a retard and a sshole
Sent from my GT-P1000 using Tapatalk 2
CM9RC6 kernel 3.0 here... installed The Pristine Way™... no mods except rngd binary started by my own tuned script...
No Random Reboots and/or shutdown, ever.
Sent from my GT-I8150 using xda app-developers app
Installed CM9 RC 6 2nd day after it was released, never experienced any silent/random reboot till now.
Sent from my GT-I8150 using Tapatalk 2
Using CM9 RC6 from the time Chronos kernel got released. Using Chronos kernel as it has the BLX feature. Only one shutdown. No random reboots. I go pristine each time i flash a ROM (including both sdcard/anrodid_secure and android/data folders)
[i used to have random reboots with RC5, even with custom kernels but with RC6 its gone]
I have been using CM9 since RC2 and I only did a "Pristine" installation once and I haven't had any reboots yet with arco68's stock kernel. I've had problems with random reboots but it's because of a custom kernel that I use.
I NEVER had a reboot issue since I start using 3.0 kernal.
It was more smooth and stable than xperia arc s which I help my friend to flash although he is using cm10.1 .
Please, do not drive away our master, If not Arco, my SGW still in GB.
Sent from my GT-I8150 using xda premium
Always be honest with the developer, only then he can develop without stress. And always try to go pristine and try the ROM before posting bugs.
cm9rc6..stock kernel 3.0..using only couple of apps just for daily use and 2 games..no reboot issue..
Sent from my GT-I8150 using xda app-developers app
When I was at CM9 2.6 nor 3.0 Kernel, I've never experienced a random reboot. I always do a Pristine way since I learned how to install a Custom ROM.
stpdkid said:
cm9rc6..stock kernel 3.0..using only couple of apps just for daily use and 2 games..no reboot issue..
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
+1
I do have a question to those who do not experience reboots. Just to make sure it is not me, I tried cm9 RC6 twice with pristine method and in both trials I had reboots. But I believe the reason is cell signal. At both work and home, the coverage is not great and the phone always swithes between 2g and 3g. So fnally my question is do you live/work at a place where coverage is great?
My stupidity, I did not try only 2G network setting before jumping to cm10.
Sent from my GT-I8150 using xda app-developers app
R: Use Arco CM9 3.x kernel? No reboot issue? Then write small message here.
I never had reboots and I'm always on 3g, but in the rare cases my phone had to switch to 2g, I had no issues at all!
Sent from my GT-I8150 using xda app-developers app
CM9 RC6 rocks.... no reboot issue till date... i don't use any tweaks...
Galaxy W + Pristine CM9 RC6 + DXLM2 + XDA App
no random reboots as of today..
but hanged while playing Six Guns from gameloft for about an hour,,, in mission mode
but it's still understandable,, since i didn't go pristine from cm9_rc4/yoon_kernel baphomet going to cm9rc_6/yoon_kernel chronos....
willl there be a CM9_RC7 or cm9_FINALe.....
I use arco's CM9 RC6 stock kernel from its update....
go pristine, flash and install some apps and games. till now i have't any random reboot even' my 2g and 3g coverage are switchable bcause am in very weak recipient signal.....
Thanks arco68
Sent from my GT-I8150
Never experience random reboot on cm9. I always do factory reset, full wipe.
Thanks Arco
Sent from my Nexus 7 using Tapatalk HD
djvmen said:
No reboot at all, with Arco's kernel. Only one shutdown, with testing Yoon Baphomet kernel on RC5. Arco's 3.x kernel never rebooted my wonder.
ICS CM9 RC6
Click to expand...
Click to collapse
mee too, my phone never reboot or crash with CM9 RC6.
i perform just an upgrade from RC4 to RC6. (no pristine, only clear dalvik cache)
Regards
Moonwonder
Hi everyone.
I got xperia arc as second phone.
I had many roms and kernels instaled good.
Then i instaled paranoid and his kernel.
Phone start to bootloop, sometimes he turn on and work (very long time to turn on) and then wifi stop to work (after few hours) and only solution is to restart.
And then same problem.
3x bootloop..fourth time i turned it on he work.
Then i instaled viper rom v5 and vengence kernel, same problems happend.
Then i tryed with rush kernel and again same problem.
So i revert it to stock rom and kernel and everything works awesome.
So i tryed to instal viper rom once again, and same problem returned (with third kernel)..
So i think something about kernel is problem, but i just don't know.
Can anyone explain or try to give me solution for fixing problems.
Sent from my LT26i using xda app-developers app
do you do wipes btw rom flashes?
Rush vaenagance doom all work fine no kernel problem
Viped everything as rom creators says.
Sent from my LT26i using xda app-developers app
i had same problem and i contacted the dev of PA. he suggested me this and after that my problem was solved.i am going to paste over here what he told me.
just delete the bootanimation.zip from /system/media and it will work fine
here you go mate hope it will solve your problem too.
You mean from rom it self, or on the phone?
Sent from my LT26i using xda app-developers app
electrash said:
You mean from rom it self, or on the phone?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
rom
Q: Which is more stable for GIO, Cm10.1 or Cm7.2?
Everything works on both, so they are both stable, but cm7 is way faster then cm10.1. Cm 10.1 had some more functions and it has more beautiful interface in my opinion, so it it's your choice...
Both
Both are stable. try both and you will notice that CM7.2 has better speed and most importantly better battery life as compared to CM 10.1
thanks. im using cm7.2 for 2 months and is fast and stable. pressed
Which CM7.2 are you guys using?
Guntram said:
Which CM7.2 are you guys using?
Click to expand...
Click to collapse
cm 7.2 from MMB with Fly-On and swap partition.
Guntram said:
Which CM7.2 are you guys using?
Click to expand...
Click to collapse
DroidGio V3.2 Based on CM7.2 By ItachiSama
Cm7.2 by mmb + fly-on with sd-ext / ext4 partition without swap
Sent from my GT-5660 using Tapatalk 2
Guntram said:
Which CM7.2 are you guys using?
Click to expand...
Click to collapse
CyanogenMod 7.2.0 RC1 Miracle Edition :good:
The only bug is the battery uptime :crying:
jkoetsier said:
cm 7.2 from MMB with Fly-On and swap partition.
Click to expand...
Click to collapse
I went back to Phiexz 7.2 because I was having a dialer issue with MMB. The screen wouldn't turn back on as if the sensor was broken and freeze like this for up to 5 mins.
The only cure was regular reboots, or the cure of not using sensor (both of which inconvenience me).
Sensor isn't broken and didn't have the problem with stock based ROMs.
With Phiexz I find myself rebooting after a lot longer periods of time.
If anyone knows a solution to this please enlighten me because I did like the newer MMB version.
Sent from my GT-S5660 using XDA Free mobile app
Soled101 said:
I went back to Phiexz 7.2 because I was having a dialer issue with MMB. The screen wouldn't turn back on as if the sensor was broken and freeze like this for up to 5 mins.
The only cure was regular reboots, or the cure of not using sensor (both of which inconvenience me).
Sensor isn't broken and didn't have the problem with stock based ROMs.
With Phiexz I find myself rebooting after a lot longer periods of time.
If anyone knows a solution to this please enlighten me because I did like the newer MMB version.
Sent from my GT-S5660 using XDA Free mobile app
Click to expand...
Click to collapse
Do a clean install again with cwm 6.0.3.2 (wipe /system, flash rom, wipe /data factory reset). I don't have this problem on cm 7.2 mmb.
waqaswasil said:
Do a clean install again with cwm 6.0.3.2 (wipe /system, flash rom, wipe /data factory reset). I don't have this problem on cm 7.2 mmb.
Click to expand...
Click to collapse
I always format everything except SD before and do factory wipe after.
I'm using px recovery because I thought the latest CWM only made a difference for CM11.
I didn't think to try that and I'll run a backup after work and give it a go tonight.
I've got a feeling my phone has been dropped on its head so many times it now behaves like that. Gio is the toughest phone I've seen from low end to high end in that regard (bar the Samsung Rugby Pro my brother imported from America).
I will let you know in a few days if this is the solution my friend.
Sent from my GT-S5660 using XDA Free mobile app
waqaswasil said:
Do a clean install again with cwm 6.0.3.2 (wipe /system, flash rom, wipe /data factory reset). I don't have this problem on cm 7.2 mmb.
Click to expand...
Click to collapse
Seems to have worked using MMB CWM. Nice work my friend.
If they could put on screen buttons and charging in CWM mode that would be joy (but I'm happy so far I'm not having sensor lag in dialer now).
Any ideas why that was the case because pxrecovery is written for CM7.
Sent from my GT-5660 using XDA Free mobile app
Soled101 said:
Seems to have worked using MMB CWM. Nice work my friend.
If they could put on screen buttons and charging in CWM mode that would be joy (but I'm happy so far I'm not having sensor lag in dialer now).
Any ideas why that was the case because pxrecovery is written for CM7.
Sent from my GT-5660 using XDA Free mobile app
Click to expand...
Click to collapse
PX Recovery is based on CWM 5.0.2.6 or maybe .7 and those versions are not completely bugfree. IF you want to use CWM 5, Use CWM 5.0.2.8 by MMB :good: :fingers-crossed:
EDIT: @Soled101 if you want to use the latest CWM with on-screen buttons and charging support, use PhilZ Recovery Which is based on the latest CWM from the KitKat Branch and can flash any ROM (CM7 too)
waqaswasil said:
EDIT: @Soled101 if you want to use the latest CWM with on-screen buttons and charging support, use PhilZ Recovery Which is based on the latest CWM from the KitKat Branch and can flash any ROM (CM7 too)
Click to expand...
Click to collapse
Cheers bro I'll check it out.
Sent from my GT-5660 using XDA Free mobile app
I'm using CM10.1 because it is better than cm7.2 and more stable. Mm10.1 is very fast.
Most stable cm7
I want to go back to cm7 from maclaw'a cm9 because of a signal problem. Which cm7 is the MOST stable as of right now? Not sure if pheixz's recovery will work with mmb cm7.
If not, I will try ASOP 2.3.7, please tell me what filesystem it uses!
s4meq said:
I want to go back to cm7 from maclaw'a cm9 because of a signal problem. Which cm7 is the MOST stable as of right now? Not sure if pheixz's recovery will work with mmb cm7.
If not, I will try ASOP 2.3.7, please tell me what filesystem it uses!
Click to expand...
Click to collapse
MMB CWM for MMB CM7. I tried px recovery with it and was having problems with my sensor in call (as in screen staying off for up to ten mins).
Sent from my GT-5660 using XDA Free mobile app
Just considering...
Soled101 said:
MMB CWM for MMB CM7. I tried px recovery with it and was having problems with my sensor in call (as in screen staying off for up to ten mins).
Sent from my GT-5660 using XDA Free mobile app
Click to expand...
Click to collapse
Just been thinking of MMB CM9/10 projects as setup wizard sometimes force closes, and I want the look of ICS. Guess that CM10 is a release candidate, so should be stable... BTW what does serial number do? It is 'unknown' but I can still make phone calls etc.
s4meq said:
Just been thinking of MMB CM9/10 projects as setup wizard sometimes force closes, and I want the look of ICS. Guess that CM10 is a release candidate, so should be stable... BTW what does serial number do? It is 'unknown' but I can still make phone calls etc.
Click to expand...
Click to collapse
What do you mean "serial number"?
Sent from my GT-5660 using XDA Free mobile app