Develop Bugs

[Q] Need help with update

I want to update the phone software but its not letting me because i rooted my phone. Currently my phone is un-rooted but device status is still MODIFIED.
First of all i just want to say i did search and look up how to update my phone after i have rooted there are just so many ways and threads im confused all in all myself
Can some one just briefly guide me what steps do i have to take. i do no want detailed step by step instructions but an outline where i have to go what i have to get.

azi90 said:
I want to update the phone software but its not letting me because i rooted my phone. Currently my phone is un-rooted but device status is still MODIFIED.
First of all i just want to say i did search and look up how to update my phone after i have rooted there are just so many ways and threads im confused all in all myself
Can some one just briefly guide me what steps do i have to take. i do no want detailed step by step instructions but an outline where i have to go what i have to get.
Click to expand...
Click to collapse
Download the latest firmware for your device (and carrier) from here. http://samsung-updates.com/. Flash with Odin. If you are just stock rooted, it should update the firmware without wiping everything. Either way be sure to do a nandroid backup and store it off device. You will need to re root afterwards.

So if i dont reroot it would i still be able to download update after this whole process?

azi90 said:
So if i dont reroot it would i still be able to download update after this whole process?
Click to expand...
Click to collapse
Yes that is correct. After flashing latest official firmware you will be stock unmodified and open to future updates.

Did u flash custom recovery? If u root with CR auto root. U shall update direct from ota after u keep it. Use ota root keeper and try.
Sent from my GT-I9300 using xda app-developers app

this is where things get confusing for me. I remember i rooted it using stock ROM and than un rooted the phone. so i guess following the first poster message helpme

Easy way (should be): Follow this post from the general forum (rather than here in the Q&A forum) from upndwn4par:
http://forum.xda-developers.com/showthread.php?t=2387423
If you are totally stock, but only rooted, it appears that most everyone set up that way has been able to skip step one and successfully get updated and keep root. Note that doing it this way will most likely also reset your phone and you will need to reinstall all your apps and such - doing a Titanium Backup or similar for user apps (not system apps!) might help speed up the process. If you have done a lot of customizing and it doesn't work without, you may have to go back and try step one, and then the rest. But I do not think you will have this issue.

n7100 4.3 HOW TO ROOT

DEAR MEMBERS,
i have just upgraded my device from android 4.1.1 to 4.3.
Now i want to know what is the simple & safe process to root my device.
I dont want to install any ROM at this time.
Plz help me guys.
my device details are as follows:
Baseband version: N7100DDEMJ9
Kernel version: 3.0.31-2099172
[email protected]#1
Sun Nov 10 14:55:01 KST 2013
Build number: JSS15J.N7100XXUEMK4
PLEASE GUIDE ME IN DETAIL.
TNX IN ADV.

http://forum.xda-developers.com/showthread.php?t=2143479

4.3?
Ruwin said:
http://forum.xda-developers.com/showthread.php?t=2143479
Click to expand...
Click to collapse
But what about 4.3?
Another quarry: what is the process of backup my current ROM.?

I had the same problem but I rooted it without the use of custom roms. Just type how to root xxuemk4 on google and you will see many pages for that
You can visit this page for example http://m.ibtimes.co.uk/galaxy-note2-n7100-root-android43-xxuemk4-jellybean-523833.html
Sent from my GT-N7100 using XDA Premium 4 mobile app

http://forum.xda-developers.com/showthread.php?t=2540761

some download link are blocked, some are not in detail for a novice like me.
what about knox?

aakashing said:
some download link are blocked, some are not in detail for a novice like me.
what about knox?
Click to expand...
Click to collapse
if you read that thread,you will find the answer...knox will triggered

:good:
aakashing said:
DEAR MEMBERS,
i have just upgraded my device from android 4.1.1 to 4.3.
Now i want to know what is the simple & safe process to root my device.
I dont want to install any ROM at this time.
Plz help me guys.
my device details are as follows:
Baseband version: N7100DDEMJ9
Kernel version: 3.0.31-2099172
[email protected]#1
Sun Nov 10 14:55:01 KST 2013
Build number: JSS15J.N7100XXUEMK4
PLEASE GUIDE ME IN DETAIL.
TNX IN ADV.
Click to expand...
Click to collapse
follow tis guide......http://forum.xda-developers.com/showthread.php?t=2540761

vickyvc said:
:good:
follow tis guide......http://forum.xda-developers.com/showthread.php?t=2540761
Click to expand...
Click to collapse
Sir,
as a novice i can't understand
1. how to "flash philz_touch_5.15.0-n7100.tar from odin for pda button"?
2. what is the process for " go to recovery (in philz touch) and flash DrKetan_MultiTool_AdvanceV5 and proceed to "aroma file manager"?
3. how can i "go to system/app in aroma"?
4. what is "go to recovery again and flash the multitool and proceed and inject root and busybox and reboot"?
5. i think su means superuser. am i correct?
plz provide the step by step process in details. i am eagerly waiting.
tnkz in adv.

Just rooted my phone using Kingo
Galaxy Note 2 GT-N7100
Build XXUEMK4 (India)
Knox Bootloader
WITHOUT tripping the Knox Counter!!!
Though Device status shows "Custom"
Can be taken care of by Using Xpose Framework & Wanam
Thanks.
Major.
Search the forum for further instructions.

You can go to the Original android development section of this forum and you'll find a how to root section. If you read that section you'll understand most of the instructions. Good luck
Sent from my GT-N7100 using Tapatalk

aakashing said:
some download link are blocked, some are not in detail for a novice like me.
what about knox?
Click to expand...
Click to collapse
About Knox read THIS.

To Root my N7100 whit Knox I make like THIS on Galaxy Mega I9205 whit Knox also. Is the same and work.
Here for Recovery I use the PhilZ last version to N7100. And to go to recovery Power + Home + Vol-up. Different on Mega.

Not so lucky with Kingo
I have a GT-N7100 running 4.3 with encryption.
I found in order to enable the encryption I have to use the samsung stock recovery for 4.3.
This greatly limits my ability to root via a custom recovery and so I tried Kingo as you suggested.
Before using Kingo I was successful at regaining root with saferoot, but SuperSU would not update.
I thought unrooting completely might help alleviate this partial root.
Kingo was succesful at UNRooting my device, but it was NOT successful at re-rooting since it wanted to flash a custom recovery which I'm afraid will potentially ruin my encrypted startup.
Once unrooted, after a few attempts running the saferoot tool, I was successfully able to install the latest version of superSU and associated files. I am uncertain if SuperSU will be able to update in the future, but for know its current.
Information of saferoot for 4.3, which doesn't require a custom recovery can be found here.
http://forum.xda-developers.com/showthread.php?t=2565758
So at present I have an encrypted stock GT-N7100 running 4.3 with a MJ5 bootloader and root. I'm pretty happy.
Cheers,
Ddfault
majorraj2003 said:
Just rooted my phone using Kingo
Galaxy Note 2 GT-N7100
Build XXUEMK4 (India)
Knox Bootloader
WITHOUT tripping the Knox Counter!!!
Though Device status shows "Custom"
Can be taken care of by Using Xpose Framework & Wanam
Thanks.
Major.
Search the forum for further instructions.
Click to expand...
Click to collapse

GT-N5120 (Note 8.0 LTE) How to root after ota 4.4.2 kit kat update?

Helppp!
Hi, I have a samsung galaxy note 8 LTE, which i just updated to 4.4.2.
How do I get this rooted?
-Do i follow this thread? http://forum.xda-developers.com/showthread.php?t=2291839
Seems like that's only confirmed for 4.2.2..
What else should I take note of? I've read things about 'Recovery' and unlocking bootloader.
-Should I do a recovery? How do I do that?
-Do I have to worry about the bootloader?
-Will I be able to get further ota updates after rooting?
Should I wait for 4.4.4 before rooting?
Thank you in advance. I've done alot of reading but I'm still paranoid and confused...

pandabamboo said:
Helppp!
Hi, I have a samsung galaxy note 8 LTE, which i just updated to 4.4.2.
How do I get this rooted?
-Do i follow this thread? http://forum.xda-developers.com/showthread.php?t=2291839
Seems like that's only confirmed for 4.2.2..
What else should I take note of? I've read things about 'Recovery' and unlocking bootloader.
-Should I do a recovery? How do I do that?
-Do I have to worry about the bootloader?
-Will I be able to get further ota updates after rooting?
Should I wait for 4.4.4 before rooting?
Thank you in advance. I've done alot of reading but I'm still paranoid and confused...
Click to expand...
Click to collapse
I have all of these questions!
There's so much information in these forums, and it's very confusing.
I simply can't find a guide for how to get from Kit-kat on the Note 8 to rooted and with civato's ROM (would love some increased pen accuracy).
Any help would really be appreciated!

pandabamboo said:
Helppp!
Hi, I have a samsung galaxy note 8 LTE, which i just updated to 4.4.2.
How do I get this rooted?
-Do i follow this thread? http://forum.xda-developers.com/showthread.php?t=2291839
Seems like that's only confirmed for 4.2.2..
What else should I take note of? I've read things about 'Recovery' and unlocking bootloader.
-Should I do a recovery? How do I do that?
-Do I have to worry about the bootloader?
-Will I be able to get further ota updates after rooting?
Should I wait for 4.4.4 before rooting?
Thank you in advance. I've done alot of reading but I'm still paranoid and confused...
Click to expand...
Click to collapse
I don't have a 5120 but everything I have read confirms that CF Autoroot works without issue on that device. Just make sure after boot up you install SuperSU, update binary, and set it to apply upon system boot. If it doesn't work the first time keep trying. As a warning....this root method will trip Knox and void your warranty. Can follow the steps HERE to root.
You will want to install a custom recovery to flash roms (PhilZ or TWRP). However, changing the recovery, bootloader, etc. will prevent you from taking OTA updates. This is not such a bad thing because you never know if a new OTA will destroy root and lock the device. It is better to let the devs modify it first and then flash it safely. Usually only takes a day or so for devs to do this.
As for changing the bootloader, it depends on the rom you flash. Some will be fine running from older bootloader and some require the KK bootloader. Just check the first post of the rom and it should give you the requirements.
---------- Post added at 09:07 AM ---------- Previous post was at 08:53 AM ----------
jwdink said:
I have all of these questions!
There's so much information in these forums, and it's very confusing.
I simply can't find a guide for how to get from Kit-kat on the Note 8 to rooted and with civato's ROM (would love some increased pen accuracy).
Any help would really be appreciated!
Click to expand...
Click to collapse
You can use CF Autoroot to obtain root and then install custom recovery via Odin as well. Then you can flash whatever rom you want.

7014
As a warning....this root method will trip Knox and void your warranty. Can follow the steps HERE to root.
Click to expand...
Click to collapse
Thanks CCallahan. Do you know of any method that will not trip Knox?
You can use CF Autoroot to obtain root and then install custom recovery via Odin as well. Then you can flash whatever rom you want.
Click to expand...
Click to collapse
I just wasn't sure on the details of these steps, and wasn't sure where to find more detail. I think I've figured it out now.
First I'd follow these steps: http://www.theandroidsoul.com/samsu...n5100-wifi-philz-touch-advanced-cwm-recovery/
Then, I'd use philz to install the custom kernel (edit: and ROM). I haven't been able to find any step-by-step instructions, however. But these seem close enough: https://www.youtube.com/watch?v=aDOY3Oi1VX8
Does this all sound correct?

jwdink said:
Thanks CCallahan. Do you know of any method that will not trip Knox?
I just wasn't sure on the details of these steps, and wasn't sure where to find more detail. I think I've figured it out now.
First I'd follow these steps: http://www.theandroidsoul.com/samsu...n5100-wifi-philz-touch-advanced-cwm-recovery/
Then, I'd use philz to install the custom kernel. I haven't been able to find any step-by-step instructions, however. But these seem close enough: https://www.youtube.com/watch?v=aDOY3Oi1VX8
Does this all sound correct?
Click to expand...
Click to collapse
I do not know of any root method compatible with the N8 that will not trip Knox. Towelroot is not compatible otherwise it would be an obvious choice.
Yes...looks like that walkthrough will work fine for installing PhilZ.
Why are you installing a custom kernel? Are you sticking with the stock rom or flashing a custom one? A lot of roms already come with the kernel packaged.

CCallahan said:
I do not know of any root method compatible with the N8 that will not trip Knox. Towelroot is not compatible otherwise it would be an obvious choice.
Yes...looks like that walkthrough will work fine for installing PhilZ.
Why are you installing a custom kernel? Are you sticking with the stock rom or flashing a custom one? A lot of roms already come with the kernel packaged.
Click to expand...
Click to collapse
I'm installing a custom ROM & Kernel because the accuracy of the pen is not very good on my device, and I primarily brought it for note taking. My understanding is that civato's ROM/kernel will fix this (hopefully!).
But I didn't mean to imply that I'm only installing a custom kernel but keeping the stock ROM. I was planning on doing both, as described in civato's kernel+ROM release thread.

jwdink said:
I'm installing a custom ROM & Kernel because the accuracy of the pen is not very good on my device, and I primarily brought it for note taking. My understanding is that civato's ROM/kernel will fix this (hopefully!).
But I didn't mean to imply that I'm only installing a custom kernel but keeping the stock ROM. I was planning on doing both, as described in civato's kernel+ROM release thread.
Click to expand...
Click to collapse
Ah ok....after you get PhilZ on there just flash civato's rom and you will be good to go.

1928
CCallahan said:
I don't have a 5120 but everything I have read confirms that CF Autoroot works without issue on that device. Just make sure after boot up you install SuperSU, update binary, and set it to apply upon system boot. If it doesn't work the first time keep trying. As a warning....this root method will trip Knox and void your warranty. Can follow the steps HERE to root.
Click to expand...
Click to collapse
Hi CCallahan,
Would you please confirm whether the method described in the link you mentioned to root Galaxy note 8.0 GT-N5120 running android 4.4.2 would work on note 8.0 i467m (LTE canadian version) running on 4.4.2?

beniboy86 said:
Hi CCallahan,
Would you please confirm whether the method described in the link you mentioned to root Galaxy note 8.0 GT-N5120 running android 4.4.2 would work on note 8.0 i467m (LTE canadian version) running on 4.4.2?
Click to expand...
Click to collapse
The procedure is the same but you want to go and download the CF AutoRoot for your device here: http://autoroot.chainfire.eu/
Your device is on the list so is compatible. There are also some basic instructions listed for how to root.

CCallahan said:
The procedure is the same but you want to go and download the CF AutoRoot for your device here:
Your device is on the list so is compatible. There are also some basic instructions listed for how to root.
Click to expand...
Click to collapse
Thanks for your response. I have only one corcern left. In the link you posted, on top of the table of CF-Auto-root, it mentions that if the bootloader is locked this might brick the device! How can I make sure that my bootloader is unlocked prior to start rooting.
Previuosly, I had my note 8 rooted with CF auto root via odine when it was on jelly bean 4.1.2. Does this mean that it is safe to root it again with new CF auto root for 4.4.2?

It's just a warning pal I rooted fine from 4.4.2 with chainfire autorotate it's just a precaution before proceeding as with any flashing procedure it contains a risk of bricking
Sent from my GT-I9505

beniboy86 said:
Thanks for your response. I have only one corcern left. In the link you posted, on top of the table of CF-Auto-root, it mentions that if the bootloader is locked this might brick the device! How can I make sure that my bootloader is unlocked prior to start rooting.
Previuosly, I had my note 8 rooted with CF auto root via odine when it was on jelly bean 4.1.2. Does this mean that it is safe to root it again with new CF auto root for 4.4.2?
Click to expand...
Click to collapse
How did you update to 4.4.2? Rom flash or OTA? Did you manually update the bootloader?
As far as I know Samsung doesn't usually lock bootloaders unless it is carrier dictated. It is usually common on HTC and Moto devices.
Better to be safe than sorry though.
Sent from my SM-G900P using Tapatalk

CCallahan said:
How did you update to 4.4.2? Rom flash or OTA? Did you manually update the bootloader?
As far as I know Samsung doesn't usually lock bootloaders unless it is carrier dictated. It is usually common on HTC and Moto devices.
Better to be safe than sorry though.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
I updated to 4.4.2 via Kies with samsung's released firmware. I havent done any other flashing apart from this. So, I suppose rooting must be fine, right?

beniboy86 said:
I updated to 4.4.2 via Kies with samsung's released firmware. I havent done any other flashing apart from this. So, I suppose rooting must be fine, right?
Click to expand...
Click to collapse
Sorry but I can't/won't confirm whether or not that particular model is safe to root after 4.4.2 upgrade. Maybe someone with more knowledge on that version can chime in. I wouldn't think it would be an issue but don't want to steer you wrong. The bootloader could be locked.
Sent from my GT-N5110 using Tapatalk

CCallahan said:
Sorry but I can't/won't confirm whether or not that particular model is safe to root after 4.4.2 upgrade. Maybe someone with more knowledge on that version can chime in. I wouldn't think it would be an issue but don't want to steer you wrong. The bootloader could be locked.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
thanks, I will dig in more on this and will post here if I find something useful.

[Q] Best way to root

In the ever changing market of roots and exploits I believe it would be nice to have a device specific rooting "poll". the other reason I'm starting this thread is because I can't seem to root my phone tried towelroot but it says my device is not supported. Im running stock 4.2.2 and I want to root mainly so I can back everything up before I custom install stock 4.4.2

Towelroot works for 4.4
Being on 4.2.2 you could try the Safe-Root method depending on your actual Firmware. Otherwise you have to stick to rooting through CWM.
All methods have their threads here. Please read them.

You could also backup your data with adb without root and after update restore this adb backup to your device. So there's no need to root before installing custom 4.4.2

CWM all day! so fast and easy to do plus it's easy to unroot.

feckinfinch said:
CWM all day! so fast and easy to do plus it's easy to unroot.
Click to expand...
Click to collapse
how exactly? I know I need to flash smth but I dont know which file it is and such. could I have a link to the proper page please?

kostas90 said:
how exactly? I know I need to flash smth but I dont know which file it is and such. could I have a link to the proper page please?
Click to expand...
Click to collapse
http://www.s4miniarchive.com/search/label/Root Find your model version and read the instructions, you won't regret it.

4.2.2 can be rooted using Kingo. Doesn't trip knox.
Tap tap tapatalked from my I9192

help me...

guys... my phone is rooted... so been getting notices for firmware update... also KIES told me to update my firmware
should i do it?
if yes, can i do it from KIES?
will it brick my phone?
will my root be gone?
can the last firmware be rooted? lastest firmware : PDA:NI2 / PHONE:MI1 / CSC:NH1 (XSE)
and can you guys suggest apps that will boost my phone? THANK YOU VERY MUCH

1. yes, but I not tested it personally.
2. Maybe yes, but i recommend remove root before updating.
3. yes
4. http://forum.xda-developers.com/showthread.php?t=2160671
App: try lSpeed (root required)
if you phone got bricked you can download a firmware to flash it manually here: http://www.sammobile.com/firmwares/
http://forum.xda-developers.com/showthread.php?t=2295227