Hi Devs,
I have a Problem with My PLAY R800i ,
it is that it doesn't connect to 2G network when I select 'GSM ONLY' in 'NETWORK MODE'
However it does conect to 3G when I select Dual Mode(GSM/WCDMA) .
The problem is 3G coverage is Not everywhere.
Right now I am on Xperia Play Express Rom ICS
and Kernel is DooMKernel
and Baseband is -36 baseband
Please let me know if u require More Info..
Re: BASEBAND
saz542 said:
Hi Devs,
I have a Problem with My PLAY R800i ,
it is that it doesn't connect to 2G network when I select 'GSM ONLY' in 'NETWORK MODE'
However it does conect to 3G when I select Dual Mode(GSM/WCDMA) .
The problem is 3G coverage is Not everywhere.
Right now I am on Xperia Play Express Rom ICS
and Kernel is DooMKernel
and Baseband is -36 baseband
Please let me know if u require More Info..
Click to expand...
Click to collapse
Even i am having Similar issues since 2 monhs... Please Help
Did you set your apns correctly?
I don't think devs case about this.
Check your APN settings.
Sent from XDA app
chery2k said:
Did you set your apns correctly?
Click to expand...
Click to collapse
eksasol said:
I don't think devs case about this.
Check your APN settings.
Sent from XDA app
Click to expand...
Click to collapse
Its Not Related to APN i guess...
as far as i Know APN is only if u want to connect to the internet....
My issue is that i only connect to WCDMA or UMTS rather than GSM network
Related
Hi,
I rooted my htc wildfire s and installed JxMatteo - ROM - V1.1
http://forum.xda-developers.com/showthread.php?p=21255022&mode=linear#post21255022
now my mobile network is not working. after restarting my mobile the icon will be shown suddenly range will gone and icon disappears , not connecting, i restarted phone, factory reset, again installed the rom issue remains same.
Please give me one solution for that
Might be the rom. Try going back to stock.
sent from my android powered. tank using xda premium B-)
issue remains
stock restored issue remains. do u have any suggestions?
APN
You may have lost/wiped your APN when you did the root. Check under your network settings for mobile network and then look for apn or access point names. You should have one or more APN options, if you don't, then you may need to manually enter yours.
APNs vary based on your carrier, so you'll need to either contact them or look them up on the internet. I'd be happy to help search if you tell me your provider.
goodstarbuck said:
You may have lost/wiped your APN when you did the root. Check under your network settings for mobile network and then look for apn or access point names. You should have one or more APN options, if you don't, then you may need to manually enter yours.
APNs vary based on your carrier, so you'll need to either contact them or look them up on the internet. I'd be happy to help search if you tell me your provider.
Click to expand...
Click to collapse
My network provider is TATA DOCOMO. Actually what happens is if i try to connect , suddenly range disconnect after 2 or 3 seconds range will come.
Again i will do restart or airplane mode , first time range will be shown suddenly range disconnect. strange problem. i dont know whats the problem. i dont know how to explain. i checked the APN it is fine. Is there any problem in my RADIO?
With Reliance CDMA the problem was an unregistered MEID. Are you on CDMA or GSM. Tata are known to be the toughest on security, so must be some setting which got hit for six.
sgiitk said:
With Reliance CDMA the problem was an unregistered MEID. Are you on CDMA or GSM. Tata are known to be the toughest on security, so must be some setting which got hit for six.
Click to expand...
Click to collapse
Mine is GSM
abhilashtv said:
Mine is GSM
Click to expand...
Click to collapse
SAme prob here bro ... tried custom roms and all kitchen stuffs it remains. even i am a TATA DOCOMO user.. india mumbai..
I am also TATA DOCOMO User. if i try with different sim it works. if try to connect the 3g symbol will shown suddenly range gone.. what to do? i am really fed up
now what?
same problem here
Im reading this link below: might be relevant
http://forum.xda-developers.com/showthread.php?t=1433675
Hello everyone, I am experiencing a problem with 3g. This probably has been asked before, but I can't find an answer.
I am in canada, which means the 3G frequencies or whatever is only for LT15a. I have an LT15a phone, with LT15i on it, firmware shouldn't effect the hardware right? So I would still pick up the LT15a frequencies on my LT15a (running LT15i) phone?
But when, say, I am in a car. I don't pick up any connection at all. I can only connect to wifi connections nearby.
When I go to Settings>Mobile Network>Service Providers, I get
3G ROGERS
2G ROGERS
TELUS
Bell
So obviously I would select 3G rogers, and then it says "registered on network" and there is a checkmark beside it. But this hasn't changed anything yet. I have data enabled, but not data roaming. I don't get a 3G symbol, even when I disable wifi. So how can I enable 3G?
Also every time I download internet settings (usually it does this when I open browser) I have to select between Rogers, Fido and cancel. Picking rogers always says "Could not download. Tap here to try again." This gets annoying, could fixing this fix the 3G?
khortonworld said:
Hello everyone, I am experiencing a problem with 3g. This probably has been asked before, but I can't find an answer.
I am in canada, which means the 3G frequencies or whatever is only for LT15a. I have an LT15a phone, with LT15i on it, firmware shouldn't effect the hardware right? So I would still pick up the LT15a frequencies on my LT15a (running LT15i) phone?
But when, say, I am in a car. I don't pick up any connection at all. I can only connect to wifi connections nearby.
When I go to Settings>Mobile Network>Service Providers, I get
3G ROGERS
2G ROGERS
TELUS
Bell
So obviously I would select 3G rogers, and then it says "registered on network" and there is a checkmark beside it. But this hasn't changed anything yet. I have data enabled, but not data roaming. I don't get a 3G symbol, even when I disable wifi. So how can I enable 3G?
Also every time I download internet settings (usually it does this when I open browser) I have to select between Rogers, Fido and cancel. Picking rogers always says "Could not download. Tap here to try again." This gets annoying, could fixing this fix the 3G?
Click to expand...
Click to collapse
I am not sure, but i think that the North Americas has their own frequencies for 3G which probably requires a firmware ending with a in order to work properly.
Curst said:
I am not sure, but i think that the North Americas has their own frequencies for 3G which probably requires a firmware ending with a in order to work properly.
Click to expand...
Click to collapse
Sorry for the bump. That sucks, i'm heading out of town on a vacation soon, would their be any way I can get 2g, 4g, or edge or something?
khortonworld said:
Sorry for the bump. That sucks, i'm heading out of town on a vacation soon, would their be any way I can get 2g, 4g, or edge or something?
Click to expand...
Click to collapse
Why not flash "a"-firmware?
Curst said:
Why not flash "a"-firmware?
Click to expand...
Click to collapse
Because i'm pretty sure only LT15i got ICS, and once you see that, you don't ever want to go back to gingerbread
CM9?
Sent from my GT-I9100 running CM10
MemoryController said:
CM9?
Sent from my GT-I9100 running CM10
Click to expand...
Click to collapse
Last time I tried to use CM (7 I think?) it didn't work so I found a thread saying to remove some certain code to remove LT15a/i restrictions. You know where this is going.
But could I actually use LT15a ICS if I use CM9?
Flash the a Baseband and then flash cm9
Sent from my GT-I9100 running CM10
MemoryController said:
Flash the a Baseband and then flash cm9
Sent from my GT-I9100 running CM10
Click to expand...
Click to collapse
last time I always got some long error that said something about LT15i, and then it would say LT18 next time, but ok, I will try. Do i just download the lt15i cm9?
EDIT: im using flashtool, should I untick "clear data" and tick everything in exclude except "exclude baseband" ?
khortonworld said:
Because i'm pretty sure only LT15i got ICS, and once you see that, you don't ever want to go back to gingerbread
Click to expand...
Click to collapse
Thats f*cked up if there is no ICS for the "a"-´market.
khortonworld said:
last time I always got some long error that said something about LT15i, and then it would say LT18 next time, but ok, I will try. Do i just download the lt15i cm9?
EDIT: im using flashtool, should I untick "clear data" and tick everything in exclude except "exclude baseband" ?
Click to expand...
Click to collapse
im gonna try this, because I leave tomorrow morning and can't waste any more time.
Also, I can't connect to anything wifi without disabling and enabling wifi on my phone, and then quickly viewing what i want to view. usually I just get an infinite loading page
khortonworld said:
Because i'm pretty sure only LT15i got ICS, and once you see that, you don't ever want to go back to gingerbread
Click to expand...
Click to collapse
here is the ics 4.1.B.0.431 firmware for LT15a.
http://forum.xda-developers.com/showthread.php?t=1694741&highlight=lt15a
moxtrom said:
here is the ics 4.1.B.0.431 firmware for LT15a.
http://forum.xda-developers.com/showthread.php?t=1694741&highlight=lt15a
Click to expand...
Click to collapse
Thank you so much, I am restoring all my stuff now. The only thing I need to fix now is not being able to connect to wifi
HI GUYS NEED YOUR HELP.
im using Sony Xperia ion at&t version since one month. i have a small problem respective to 3g connection. im from Mumbai - India and using Vodafone network.
under mobile networks i dont see any option like switching between 2g & 3g connectivity. always it remains under 2g connection. please check the attached image.
can any one guide me how to solve this switching problem ???
thanx in advance
try change in - *#*#4636#*#*
mmm273 said:
try change in - *#*#4636#*#*
Click to expand...
Click to collapse
already tried that and checked each and every mode but nothing changed
I am using HTC DESIRE HD A1919. (Baseband version 12.65.60.29U_26.14.04.28_M) and (Kernel version 2.6.35.10-g931a37e [email protected] #1 Wed Nov 9 14:04:03 CST 2011). Recently 3G is launched in my country Pakistan but when my phone is not connecting to 3G. settings/about phone/Network/Mobile Network type always shows EDGE! I inserted my sim in a friend's phone in the same area and 3G was working fine. I went to Htc Sales and Service Store but they simply said they can't help! I have never rooted rooted my phone and done nothing with my phone except downloading apps from Google play! Can anyone tell how to solve this problem??? Please tell the solution in steps because i am unaware of android development and stuff like that!
No Hard...
faseeh said:
I am using HTC DESIRE HD A1919. (Baseband version 12.65.60.29U_26.14.04.28_M) and (Kernel version 2.6.35.10-g931a37e [email protected] #1 Wed Nov 9 14:04:03 CST 2011). Recently 3G is launched in my country Pakistan but when my phone is not connecting to 3G. settings/about phone/Network/Mobile Network type always shows EDGE! I inserted my sim in a friend's phone in the same area and 3G was working fine. I went to Htc Sales and Service Store but they simply said they can't help! I have never rooted rooted my phone and done nothing with my phone except downloading apps from Google play! Can anyone tell how to solve this problem??? Please tell the solution in steps because i am unaware of android development and stuff like that!
Click to expand...
Click to collapse
Open Dialer n Type: *#*#4636#*#*
Testing window will open up, Click on Phone Information > scroll down > Preferred Network(WCDMA Preffered by defect) > Choose WCDMA Only.
That's it.
htc desire hd 3g problem
dr.patron99 said:
Open Dialer n Type: *#*#4636#*#*
Testing window will open up, Click on Phone Information > scroll down > Preferred Network(WCDMA Preffered by defect) > Choose WCDMA Only.
That's it.
Click to expand...
Click to collapse
i don it but my phone go again in pereferd WCDMA what would i do pls
rohan khan said:
i don it but my phone go again in pereferd WCDMA what would i do pls
Click to expand...
Click to collapse
Did you get 3G while choosing WCDMA Only?
If Yes,means you have to do it manually everytime you reboot your device.
If No,means you don't have a 3G data plan.
If you reboot your device mean while it will again set to prefered WCDMA so everytime you need to do it manually. Just to remember if you're getting 3G even on prefered WCDMA then leave it as it is. I think it's an issue regarding weak carrier signal.
dr.patron99 said:
Did you get 3G while choosing WCDMA Only?
If Yes,means you have to do it manually everytime you reboot your device.
If No,means you don't have a 3G data plan.
If you reboot your device mean while it will again set to prefered WCDMA so everytime you need to do it manually. Just to remember if you're getting 3G even on prefered WCDMA then leave it as it is. I think it's an issue regarding weak carrier signal.
Click to expand...
Click to collapse
no i did'nt get 3g after WCDMA preferd but when i replace my sim to other set its working its so confusing
rohan khan said:
no i did'nt get 3g after WCDMA preferd but when i replace my sim to other set its working its so confusing
Click to expand...
Click to collapse
mine situation is exactly the same situation which is yours!
dr.patron99 said:
Did you get 3G while choosing WCDMA Only?
If Yes,means you have to do it manually everytime you reboot your device.
If No,means you don't have a 3G data plan.
If you reboot your device mean while it will again set to prefered WCDMA so everytime you need to do it manually. Just to remember if you're getting 3G even on prefered WCDMA then leave it as it is. I think it's an issue regarding weak carrier signal.
Click to expand...
Click to collapse
I have tried everything like this....but still no results! I guess this is a problem of build.prop! can anyone help in this regard?
faseeh said:
I have tried everything like this....but still no results! I guess this is a problem of build.prop! can anyone help in this regard?
Click to expand...
Click to collapse
Its not the build prop. Its how HTC designed the DHD.
The DHD isnt quadband, You can check the specs at gsm arena.
Some countries have thier 3g on a different band, so if you buy a DHD that doesnt scan for 3g on your countries band, you face the same problem.
I have being trying to fix this problem but got stuck along the way. Its very good to see that people also have the same problem. Maybe the devs would try something.
mickeyasamoah said:
Its not the build prop. Its how HTC designed the DHD.
The DHD isnt quadband, You can check the specs at gsm arena.
Some countries have thier 3g on a different band, so if you buy a DHD that doesnt scan for 3g on your countries band, you face the same problem.
I have being trying to fix this problem but got stuck along the way. Its very good to see that people also have the same problem. Maybe the devs would try something.
Click to expand...
Click to collapse
dear, did you get any sulution for 3g network on dhd?
rohan khan said:
dear, did you get any sulution for 3g network on dhd?
Click to expand...
Click to collapse
Nope..
Before i can try anything i have to put the device in diag mode which i have being able to, but the problem now is the device isnt showing up properly in QPST(a program for communicating directly to the qualcomm chip).
It detects the open port on windows but its unable to find the phone in the port.
If the phone doesnt show up in the port, changes cannot be done.
So thats the update.
If you have any idea, you could share
WCDMA
goto mobile network under settings, then select network mode, change it to GSM/WCDMA auto if it doesnt work then change it to WCDMA only.
It'll do the trick.
Hi
I was using my F180L. I went into global roaming section and searched for networks I was clearly seeing networks 2g/3g NETWORK NAME
Then I made sum changes in settings which I dont remember and tried telenor sim.It didnot recognize telenors sim However it works on 2g Warid Sim.But now when I search for networks It only show 2g Network name.Please help
Regards
Noaman Ahmed
noamanahmed said:
Hi
I was using my F180L. I went into global roaming section and searched for networks I was clearly seeing networks 2g/3g NETWORK NAME
Then I made sum changes in settings which I dont remember and tried telenor sim.It didnot recognize telenors sim However it works on 2g Warid Sim.But now when I search for networks It only show 2g Network name.Please help
Regards
Noaman Ahmed
Click to expand...
Click to collapse
it is happened to users who using wcdma or other non-cdma users.
Go to Settings -> Network -> choose CDMA subscription -> check RUIM
then open dialer,type *#*#4636#*#*,phone information,choose Select prefered network type to WCDMA prefered, reboot
now you should get signal on your phone,if not,check if network type is LTE,then switch it to 3G or 2G,then it should have signal now.
press the thanks button if that helps you
rais.asif786 said:
it is happened to users who using wcdma or other non-cdma users.
Go to Settings -> Network -> choose CDMA subscription -> check RUIM
then open dialer,type *#*#4636#*#*,phone information,choose Select prefered network type to WCDMA prefered, reboot
now you should get signal on your phone,if not,check if network type is LTE,then switch it to 3G or 2G,then it should have signal now.
press the thanks button if that helps you
Click to expand...
Click to collapse
Hi
It seems I got the issue resloved by running into another issue. First of all there is no such settings in my menu and second off all all the codes I try and when I press the last corrector the whole code disappears and nothing happens.Even *#06#
doesnot work
Also there seems to be a signal dropping issue. btw I am using F180L which is similar to E975
Also Thanx so much for trying
noamanahmed said:
Hi
It seems I got the issue resloved by running into another issue. First of all there is no such settings in my menu and second off all all the codes I try and when I press the last corrector the whole code disappears and nothing happens.Even *#06#
doesnot work
Also there seems to be a signal dropping issue. btw I am using F180L which is similar to E975
Also Thanx so much for trying
Click to expand...
Click to collapse
try to flash kdz again in your device./.. best of luck