[Q] How to install CM10 on HTC Desire - Desire Q&A, Help & Troubleshooting

Hello,
I wanted to install CM10 (http://forum.xda-developers.com/showthread.php?t=1945441)
on my HTC desire.
It is rooted-soff (I am running MIUI 2 indeed) and got ClockworkMod 5.8 (the latest from their official site).
When I download and try to install the above mentioned rom I always get an error with code "7".
Any clues ?
Thanks in advance to anyone helping.

Wrong hboot. Flash stock hboot and try again.

kostelo said:
Wrong hboot. Flash stock hboot and try again.
Click to expand...
Click to collapse
Edit:
now I understood, and writing here the solution:
I had my htc desire with th4e Apharev CM7 partition table. This wasn't allowing me to install the new CM10.
I flashed the stock partition table, from the alpharev site, and then installation worked.
Thanks for helping me

ghepardo said:
I got the alpharev one (http://alpharev.nl/) isnt this good ? wouldn0t flashing stock hboot remove my s-off/root ?
Click to expand...
Click to collapse
No, it won't make you s-on.
Anyway, you have the stock hboot if you didn't change it. Try flashing it again (The rom), then, if it doesn't work, flash the stock hboot from the alpharev site.

Related

[Q][ANSWERED] Hboot and Ginger Roms

hello everyone,
this is my 1st post, and sorry if wrong section...
i have desire rooted.
bootloader : 0.83 S-ON (INCORRECT)
CORRECTION: bootloader : 0.80 S-ON
i've tried to flash a ginger-based custom rom.
and it was stuck on the HTC splash screen (no boot i guess)
tried every thing, from wipe, repartion, wipe all, reset data ....
so my question, is there a minimum version of bootloader required to install and run a ginger-based rom? as i had never applied an OTA update, once i rooted the device, i flash custom roms all the time, and never updated the hboot.
thanks in advanced.
Bootloader version does not matter. Are you using the a2sd versions?
Sent from my HTC Desire using XDA Premium App
stinger1 said:
hello everyone,
this is my 1st post, and sorry if wrong section...
i have desire rooted.
bootloader : 0.83 S-ON
i've tried to flash a ginger-based custom rom.
and it was stuck on the HTC splash screen (no boot i guess)
tried every thing, from wipe, repartion, wipe all, reset data ....
so my question, is there a minimum version of bootloader required to install and run a ginger-based rom? as i had never applied an OTA update, once i rooted the device, i flash custom roms all the time, and never updated the hboot.
thanks in advanced.
Click to expand...
Click to collapse
Can you please provide more details like:
1.What rom are you trying to flash?
2.How did you partition your sd-card?
3.What recovery are you using?
TheGhost1233 said:
Bootloader version does not matter. Are you using the a2sd versions?
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
yes, the ROM i was flashing was supposed to be app2sd+
Can you please provide more details like:
1.What rom are you trying to flash?
2.How did you partition your sd-card?
3.What recovery are you using?
Click to expand...
Click to collapse
1-ROM:
AuraxTremeGinger v8.6 Gingerbread Sense 2.3.3
http://forum.xda-developers.com/showthread.php?t=1052761
2- 1 GB ex3 using Amon RA.
3- Amon RA to flash the rom to.
To be honest mate I tried most of the Gingerbread roms and only a few of them worked until I alphareved, I think the gingerbread roms defo require a different hboot, I could be wrong but until I changed to s-off nothing worked
stinger1 said:
yes, the ROM i was flashing was supposed to be app2sd+
1-ROM:
AuraxTremeGinger v8.6 Gingerbread Sense 2.3.3
http://forum.xda-developers.com/showthread.php?t=1052761
2- 1 GB ex3 using Amon RA.
3- Amon RA to flash the rom to.
Click to expand...
Click to collapse
Well, Before I was s-off, I have successfully flashed many times the Insertcoin sense rom by baadnewz and many other similiar roms. I used 1GB ext 3 partition+96MB swap partition and the rest was fat32.
You should try this configuration.
In addition, what version of Amon ra's recovery are you using, for me both 2.0.0 and 2.0.1 have worked perfectly.
Good luck
Jonnibravo said:
To be honest mate I tried most of the Gingerbread roms and only a few of them worked until I alphareved, I think the gingerbread roms defo require a different hboot, I could be wrong but until I changed to s-off nothing worked
Click to expand...
Click to collapse
well, thats what i feel to.
Well, Before I was s-off, I have successfully flashed many times the Insertcoin sense rom by baadnewz and many other similiar roms. I used 1GB ext 3 partition+96MB swap partition and the rest was fat32.
You should try this configuration.
In addition, what version of Amon ra's recovery are you using, for me both 2.0.0 and 2.0.1 have worked perfectly.
Good luck
Click to expand...
Click to collapse
Mike:
when i reboot into recovery
i got at the bottom of screen
Build: RA-Desire-v1.7.0.1-R5
is it too old?
please can you provide the link to download the version of amon ra u r using
it will be last step before alpharev
thanks all.
stinger1 said:
well, thats what i feel to.
Mike:
when i reboot into recovery
i got at the bottom of screen
Build: RA-Desire-v1.7.0.1-R5
is it too old?
please can you provide the link to download the version of amon ra u r using
it will be last step before alpharev
thanks all.
Click to expand...
Click to collapse
Yeah, it is quite old , download 2.0.1 from here
hi guys, I recently failed to flash Auraxtremeginger 8.6 and I finally figured out why. It seems that Gingerbread prefers HBoot 0.93 so I...
1) flashed my phone with the latest official RUU(2.29 with HBoot 0.93 and I needed a gold card flashing from Auraxtsense 8.4 with Hboot 0.80)
2) and then reroot it with unrevoked
3) and then reset to factory settings, wiped Dalvik
4) and then install from zip in the clockwork recovery... and success...
*Note: No S-Off done in the process.
S-On, Hboot 0.93, never had any problem flashing GB roms. All worked fine (around 3 i tryed)
hello everyone
i confirm, changing to Amon Ra 2.0.1 fixed the problem
now i have the Ginger rom flashed and running
CORRECTION: i have bootloader : 0.80 S-ON
Not 0.83
thanks all

[Q] Upgrading HBOOT from 0.75, AlphaRev failed?

I recently bought a Desire (A8183) and it came with HBOOT 0.75.0000 and I am trying to get S-OFF on it. I tried using AlphaRev and it came up with an error in step 3. How do I overcome this?
The phone still works fine.
tangcla said:
I recently bought a Desire (A8183) and it came with HBOOT 0.75.0000 and I am trying to get S-OFF on it. I tried using AlphaRev and it came up with an error in step 3. How do I overcome this?
The phone still works fine.
Click to expand...
Click to collapse
1st: Wrong topic, you should post it in Q&A.
2nd: Have you flashed any custom ROM??? If so, thats why you cannot S-OFF it, try any near-to-stock, froyo rooted rom and then try again, this will do the trick
Cheers
thanito said:
1st: Wrong topic, you should post it in Q&A.
2nd: Have you flashed any custom ROM??? If so, thats why you cannot S-OFF it, try any near-to-stock, froyo rooted rom and then try again, this will do the trick
Cheers
Click to expand...
Click to collapse
Oops, wrong subforum, didn't realise.
Yes I'm running a custom ROM I'll try a Froyo-based ROM and see if that helps.
It's a shame that Revolutionary doesn't support this version of HBOOT, is there any way of 'tricking' Revolutionary to S-OFF the 0.75 HBOOT?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
You can always update bootloader... if you have a goldcard then put the attached file in the root of your sd-card, and then boot into bootloader and wait for it do do it's thing.. when it prompts you select yes. This will update your bootloader to version 0.93.1002
You shouldn't lose any data, but do make a backup of the ROM in recovery in case you get a bootloop.
Then run Revolutionary.
MD5 6384C1953791831738CCB78322DABD2C
bortak said:
You can always update bootloader... if you have a goldcard then put the attached file in the root of your sd-card, and then boot into bootloader and wait for it do do it's thing.. when it prompts you select yes. This will update your bootloader to version 0.93.1002
You shouldn't lose any data, but do make a backup of the ROM in recovery in case you get a bootloop.
Then run Revolutionary.
MD5 6384C1953791831738CCB78322DABD2C
Click to expand...
Click to collapse
I downloaded the file and put it on the root sdcard... Bootloader seemed to just skip over the file though.
Do I need to change the text file in the zip to my CID or anything else? It doesn't like it
you need a goldcard, so it ignores the CID.. or actually.. what network are you on?
EDIT: Just noticed lol
Wait I'm downloading a Telstra RUU and I'll give you a new PB99IMG
try this. If not, then you can always use the RUU to do a full update, and then S-OFF and flash a custom ROM.
Thanks I'll give it a try.
I have four microSD cards at home and I've tried gold carding all of them... I don't know how successful I was cos I couldn't do what I wanted on the Desire HD
tangcla said:
Thanks I'll give it a try.
I have four microSD cards at home and I've tried gold carding all of them... I don't know how successful I was cos I couldn't do what I wanted on the Desire HD
Click to expand...
Click to collapse
try the goldcard tutorial I posted.
Okay, well I'm gonna get to sleep now but I'll give you some advice before you go.
If you can't update the bootloader with that, I'd suggest backing up your ROM (if you havent done so already), flashing the RUU to bring it up to the latest bootloader version, and then using revolutionary.
Once you've S-OFF'd with revo. Use android flasher to flash recovery (Note: your backup will not work if you do not flash the same version of recovery) and then do a full wipe and flash a ROM of your choice.
Would you happen to know where I can get the original Telstra RUU from? I think that might be my best bet.
Thanks for your help!
tangcla said:
Would you happen to know where I can get the original Telstra RUU from? I think that might be my best bet.
Thanks for your help!
Click to expand...
Click to collapse
I sent you a link on my other post, but I think the site is down at the moment.. I can upload a mirror for you though because I downloaded it yesterday
http://www.mirrorcreator.com/files/...2U_5_11_05_14_release_150162_signed.exe_links
Thanks - this looks like it worked now HBOOT 0.93.0001, running revolutionary now.
Is there any benefit in upgrading HBOOT at all? What does 1.02.0001 offer?
Hboot 1.xxxx is the stock hboot for gingerbread. So it offers you nothing. By flashing a hboot like cm7 (most roms fit in this hboot), you get much more space for installing apps, because its /data partition is much bigger.
SwiftKeyed from dGB using Transparent XDA App

[Q] Help on how to install official RUU

Im currently having problems installing the official ruu, it requires for me to download and install htc sync which i have, my mate did a factory reset on the custom rom which messed it up!, Im having difficulty installing custom roms, I only managed to install miui that works, but htc sync isnt picking it up, the rest dont boot up just stay at htc screen, is there any way to install it via bootloader? or anyone provide a official rom that will install?, Its got cm7/r2 hboot, I just need to make it official please, any help will do, thanks
shaky153 said:
...Its got cm7/r2 hboot...
Click to expand...
Click to collapse
Try with the stock hboot...(or the downgrader hboot only if u need s-on again)
after, u can run the ruu
shaky153 said:
Im currently having problems installing the official ruu, it requires for me to download and install htc sync which i have, my mate did a factory reset on the custom rom which messed it up!, Im having difficulty installing custom roms, I only managed to install miui that works, but htc sync isnt picking it up, the rest dont boot up just stay at htc screen, is there any way to install it via bootloader? or anyone provide a official rom that will install?, Its got cm7/r2 hboot, I just need to make it official please, any help will do, thanks
Click to expand...
Click to collapse
try my guide. Since you're on cm7r2 hboot remember to flash bravo stock before you use the RUU
Essentially, all you can do is fastboot flash hboot downgrade.img then RUU again.
This is a record. Twice in one day. We need a sticky just for this issue
Sent from my HTC Desire using xda premium
rootSU said:
This is a record. Twice in one day. We need a sticky just for this issue
Click to expand...
Click to collapse
changed the title of my thread.. so now maybe it's a little more obvious as to what it contains and maybe people will actually bother to look..
The problem is partly possibly that the stickies in the app are in a different tab
Sent from my HTC Desire using xda premium

[Q]Flash Problem...Please Help me...

Hello there i have an HTC Desire A8181...I had the CM7 Hboot S-Off using the revolutionary system and MIUI ROM and all goes well...Yesterday i was trying to Install the Runnymage Sense ROM but that ROM was needed CM7R2 Hboot so i upgrade my HBoot to CM7R2...The rom was ok but not in enough quick like MIUI so i decide to return to miui...I try to reflash the official gingerbread sense rom first and then to install the MIUI rom again...When i try to flash the off rom i get an error 152 and the device has stuck into a screen with the htc logo and /!\ all around the corners...Could you please help me with that?I dont know what to do in order to make my phone work again...
Kind regards John!
JohnDaKinky said:
Hello there i have an HTC Desire A8181...I had the CM7 Hboot S-Off using the revolutionary system and MIUI ROM and all goes well...Yesterday i was trying to Install the Runnymage Sense ROM but that ROM was needed CM7R2 Hboot so i upgrade my HBoot to CM7R2...The rom was ok but not in enough quick like MIUI so i decide to return to miui...I try to reflash the official gingerbread sense rom first and then to install the MIUI rom again...When i try to flash the off rom i get an error 152 and the device has stuck into a screen with the htc logo and /!\ all around the corners...Could you please help me with that?I dont know what to do in order to make my phone work again...
Kind regards John!
Click to expand...
Click to collapse
You flashed an RUU to revert to Stock Gingerbread right? Stock Gingerbread requires the stock hboot, CM7r2 is not big enough to contain it. Hence the HTC logo and 4!. Go and flash hboot downgrader from AlphaRev and reflash RUU again. The 4! screen acts as fastboot so just fastboot flash from that screen.
Sent from my HTC Original Desire using Tapatalk
You are absolutely right...I was trying to revert it to stock...:/ And now i am stuck on the 4 /!\ screen...Now how can i flash the hboot downgrader?Cause my device stucks in this screen...I cant boot to bootloader...
Sorry for double posting thanks for your help itachi1706 problem solved!
You should have posted how you solved the problem to help others.
I fix it using this method...
itachi1706 said:
You flashed an RUU to revert to Stock Gingerbread right? Stock Gingerbread requires the stock hboot, CM7r2 is not big enough to contain it. Hence the HTC logo and 4!. Go and flash hboot downgrader from AlphaRev and reflash RUU again. The 4! screen acts as fastboot so just fastboot flash from that screen.
Sent from my HTC Original Desire using Tapatalk
Click to expand...
Click to collapse
Oh My GOD!

[Q] How can I update my hboot for S-OFF?

I want to update my HTC Desire (AMOLED) with the current hboot of 0.75.
For revolutionary I need a hboot of 0.93. So, what's the best way to do it? I can't find a good tutorial. Can I simply download the hboot image from anywhere and flash it via CWM 2.x?
Is the current ROM safe or have I to reinstall it?
Thanks!
Ultrazauberer said:
I want to update my HTC Desire (AMOLED) with the current hboot of 0.75.
For revolutionary I need a hboot of 0.93. So, what's the best way to do it? I can't find a good tutorial. Can I simply download the hboot image from anywhere and flash it via CWM 2.x?
Is the current ROM safe or have I to reinstall it?
Thanks!
Click to expand...
Click to collapse
Use alpharev and follow the instructions there.
It is recommended that you return to rooted stock ROM before you S-OFF but it is not essential (I didn't).
ascot17 said:
but it is not essential (I didn't).
Click to expand...
Click to collapse
Most roms wont work. Its certainly safest and best practice.
Thanks for reply!
Today I installed a prerooted stock froyo rom, but Alpharev won't work. Here's the error.
Is there another simple way to update the hboot to 0.93 so I can use revolutionary?
I believe you can flash the official Gingerbread rom found on HTCdev site. This will upgrade your rom to Gingerbread as well as your hboot. Then use revolutionary to s-off.
stankyou said:
I believe you can flash the official Gingerbread rom found on HTCdev site. This will upgrade your rom to Gingerbread as well as your hboot. Then use revolutionary to s-off.
Click to expand...
Click to collapse
nopenopenopenopenope
I'm still paranoid about that piece of crap. Please don't, just use a stock 2.2 RUU, anyone you want if you have a goldcard (preferably 2.2)
you can try alpharev
http://alpharev.nl/

Categories

Resources