Ok, So I wanted to change my ROM and I thought I did it right, but obviously that was not the case lol.
Pretty much I flashed the clockwork recovery, had it set to wipe the two things you want to wipe and then once it came back I installed zip from sd card, however, when I thought I was done and restarted my phone it just continuously loops back and forth back and forth.
I know there's a way to fix it since I have a micro sd reader, but how? I've got something REAL important to do tomorrow and not having my phone will be a huge mess.
d3athb4dishonor said:
Ok, So I wanted to change my ROM and I thought I did it right, but obviously that was not the case lol.
Pretty much I flashed the clockwork recovery, had it set to wipe the two things you want to wipe and then once it came back I installed zip from sd card, however, when I thought I was done and restarted my phone it just continuously loops back and forth back and forth.
I know there's a way to fix it since I have a micro sd reader, but how? I've got something REAL important to do tomorrow and not having my phone will be a huge mess.
Click to expand...
Click to collapse
What ROM were you on and what ROM are you going to?
What did you wipe?
How did you wipe?
How did you flash?
Sent from my T-Mobile G2 using XDA App
OriginalGabriel said:
What ROM were you on and what ROM are you going to?
What did you wipe?
How did you wipe?
How did you flash?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I was on the stock rom and I was trying use the update-cm-7.0.3-vision-signed
I used Clockwork Recovery to wipe and it already had two options checked to wipe, Pavlik cache and wipe data or whatever it says... Then I flashed into clockwork recovery and I went to install from ZIP, I went and found the rom file on my sd card and pressed install, it took a few moments and was done. I also added the googlepack using the same method right after. Then when I thought I was finished I rebooted my device and its been stuck in a loop ever since.
Appreciate you trying to help, I guess I figured it out with a good ole fashioned guess hahaa.
I went and wiped my phone and data to factory, wiped the Pavlic (which I think I'm saying wrong lol) and then I installed the ROM again and it worked this time.
d3athb4dishonor said:
I was on the stock rom and I was trying use the update-cm-7.0.3-vision-signed
I used Clockwork Recovery to wipe and it already had two options checked to wipe, Pavlik cache and wipe data or whatever it says... Then I flashed into clockwork recovery and I went to install from ZIP, I went and found the rom file on my sd card and pressed install, it took a few moments and was done. I also added the googlepack using the same method right after. Then when I thought I was finished I rebooted my device and its been stuck in a loop ever since.
Click to expand...
Click to collapse
I would recommend flashing the superwipe from this thread. there are 3 downloads, Try the standard superwipe first. and use superwipe+ if you have GPS problems.
Super wipe automaticly wipes system, data and cache partitions. Flash the ZIP in recovery as you would flash a ROM.
And it is recommended not to use ROM manager for flashing and to always to it manually in CWM.
So download superwipe, flash superwipe, flash ROM, flash GAPPS and reboot.
I would also recommend flashing cm 7.1 because its an outrageously HUGE upgrade over the one you just flashed.
Sent from my HTC Vision using XDA Premium App
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have the Sprint S3 with 4.1.2. Last night I rooted it and it worked fine. I then flashed CWM Recovery and rebooted, all was fine. Tried to put on Liquid Smooth rom and didn't have gapps, attempted to flash gapps but came up with error. Got fed up with it and tried to flash the Synergy Rom. I cleared dalvik and cache, made a backup and flashed. Went through the whole process and auto rebooted afterwards. Went to SAMSUNG on boot and screen went black before finishing and will not go further. I can get into stock recovery but not CWM Recovery. I'd like to have the liquidsmooth rom on there but i also downloaded the stock 4.1.2 rom just in case. How can I get past this to get into either CWM recovery or somehow flash a rom from Odin? I'm stuck.
jsaye2002 said:
I have the Sprint S3 with 4.1.2. Last night I rooted it and it worked fine. I then flashed CWM Recovery and rebooted, all was fine. Tried to put on Liquid Smooth rom and didn't have gapps, attempted to flash gapps but came up with error. Got fed up with it and tried to flash the Synergy Rom. I cleared dalvik and cache, made a backup and flashed. Went through the whole process and auto rebooted afterwards. Went to SAMSUNG on boot and screen went black before finishing and will not go further. I can get into stock recovery but not CWM Recovery. I'd like to have the liquidsmooth rom on there but i also downloaded the stock 4.1.2 rom just in case. How can I get past this to get into either CWM recovery or somehow flash a rom from Odin? I'm stuck.
Click to expand...
Click to collapse
So you were able to get into the custom recovery (CWM) a couple of times before flashing Synergy Rom, but now it's reverted to stock recovery? When you turn your phone off and hold Volume up, menu, and power it boots into the stock recovery? I've never heard of that happening before.
The best way is to re-do your root process through Odin a-la qbking77's tutorial. This will install CWM again and then you can flash away. Make sure you check your md5sums on the Rom files you downloaded before flashing them. That's the most common cause of bad flashes around these parts.
topherk said:
So you were able to get into the custom recovery (CWM) a couple of times before flashing Synergy Rom, but now it's reverted to stock recovery? When you turn your phone off and hold Volume up, menu, and power it boots into the stock recovery? I've never heard of that happening before.
The best way is to re-do your root process through Odin a-la qbking77's tutorial. This will install CWM again and then you can flash away. Make sure you check your md5sums on the Rom files you downloaded before flashing them. That's the most common cause of bad flashes around these parts.
Click to expand...
Click to collapse
I've ended up fixing it but had to flash stock 4.1.1 on it from Odin and then it automatically went to 4.1.2 after reboot. Thanks
But yes, it was going to CWM just fine before I flashed Synergy after Liquidsmooth. Thats how I put on Synergy. But at least it was just a soft-brick.
Did you wipe (everything) between flashes? Even roms of the same version can have issues if you flash one over the other
By everything I mean /system, /data (factory reset), dalvik cache, and cache
I rooted my phone, downloaded the jedi mind trick rom and attempted to flash it. I deleted and format my phone in CWM and i installed the rom from an internal sdcard. Now it keeps resetting and wont turn on. What should I do now?
Have you tried jamison's cache wipe?
Sent from my HTC One using xda app-developers app
Im downloading the stock telus rom in an attempt just to start from the beginning. When I flash it I'll get back to you. I was rushing when I rooted it the first time I guess.
Okay so I've done that and have rooted it using the s2 toolkit. what steps should I take to ensure the jedi mind trick rom can be successfully flashed?
Okay I tried reflashing it again... Didn't work, I have the same problem. I did the factory settings, and wiped the cache and flashed the rom. I then went into advanced and cleared the Devac (sp) cache and fixed permissions. I rebooted and it didn't work. It starts, gets to about the loading circle graphic and just resets
I used Darkside super wipe and it worked for me...
ive done it like this.
flashed original stock rom via odin
Root via S2 toolkit
flash cmw with toolkit as above
and flash custom rom via s2 toolkit
and after that used darkside superwipe
thanks for the tip, I tried the darkside wipe but it still is happening.
I have the same exact thing. But for me it's different. It started with the PACman 22.0.1. Whenever I press the power button to turn on/off the screen, it would restart a couple of seconds later being stuck in an infinite reboot loop. Can't get into recovery mode (used TWRP 2.3.3.1 and 2.5). I somehow managed to revert back to stock which worked properly. Rooted and installed PACman 22.1.1 ROM and it's still stuck on a reboot loop.
I don't know if it's a hardware problem (wiring off power button to the circuit is damaged) or a software code that messed up the machine code in the circuit.
i had the same when i installed wrong kernel and radio...try it like this..instal stock
http://forum.xda-developers.com/showthread.php?t=1513359
and then try cwm recovery version from the s2 toolkit (try non touch ver.)
and then try flashing
try doing a factory reset, wipe cache and install rom. don't wipe cache or anything after that until after it boots. btw don't use cwm wipe cache, try the one that is stickied in development forum.
Hey guys, hope you can help me out.
My brother's phone was running a PacMan rom from June; today I decided to find an update for the rom and did so via Goo.im - I believe I definitely downloaded something completely different (I believe I ended up downloading Chameleon...). Being the idiot that I am, I decided to rename the zip file to update.zip and installed it as an update. When I rebooted the phone, it would not boot up past the Chameleon OS screen.
I've tried to do a factory reset and flash a new rom (Pac-Rom) but it does not boot past the CyanogenMod screen.
What can I do? I can still access the recovery.
Thanks!
You need to factory reset , wipe /system, wipe/cache , wipe dalvic cache. Then proceed to flash what ROM you want again
Sent from my SAMSUNG-SGH-I727 using xda app-developers app