Develop Bugs

[Q] WIFI Not working on any ICS rom

It's really strange, no matter what ICS rom i use, WiFi doesn't work at all! I turn on WiFi and it gets turned on, and after pressing Scan it says No available WiFi detected... i have tried various ROMs, latest updates, including cm-ics, IceColdSandwich, MIUI us, PrimoS.. having the same problem
However, it works on any other non-ics rom, like LeeDroid, MIUI Android, Ultimate Ace..
I've also used WIFI Manager app still no luck..
please help.. thanks.

Are you full wiping? I do get wifi with most/all ics roms. That is the only type of connection I use. Is it that you don't get any connection at all? Or does it turn on for a while? Is your router working properly? Only happens with ics and not gb?
Do a full wipe, download the file again, make sure the checksum matches and most impirtantly, check the op ti see if that is a known issue. However, most of ths ics have working wifi.
Sent from a dream.

try different radio or wifix from ice cold sandwish

Teichopsia said:
Are you full wiping? I do get wifi with most/all ics roms. That is the only type of connection I use. Is it that you don't get any connection at all? Or does it turn on for a while? Is your router working properly? Only happens with ics and not gb?
Do a full wipe, download the file again, make sure the checksum matches and most impirtantly, check the op ti see if that is a known issue. However, most of ths ics have working wifi.
Sent from a dream.
Click to expand...
Click to collapse
No it doesn't work at all with ics, i do full wipe everytime yes. and i don't have a problem with my router, it doesn't work at home nor at work, it just doesn't find anything. It's okay with gb but no luck with any ics

ghalyoum said:
try different radio or wifix from ice cold sandwish
Click to expand...
Click to collapse
Looks like Wifix fixed my problem. Thanks a lot

wifi problem in htc desire with any ICS roms
I have also been getting the same problem... wifix will solved it for a while(for few minutes) but then again no connection in the sense that wifi link shows excellent connection but then when you try to open up a site then same problem comes back... did full wipes everything... dalvik.. battery stats... cache...
baseband version: 32.56.00.32U_5.17.05.23
has it got anything to do with radio or something...
help needed here guys..

HTC Dsire, same problem
I have this problem with my htc desire , but wifix did not solved my problem, still I can`t use wifi on ics

symbianmobiles said:
I have this problem with my htc desire , but wifix did not solved my problem, still I can`t use wifi on ics
Click to expand...
Click to collapse
What ICS ROM do you have?

I don't know why, but "dirty reflash" worked for me.
#1 Full wipe and flash the ROM.
#2 Setup and repeat rebooting until the error happens.
#3 Reboot into recovery, wipe cache and dalvik cache.(just to make sure)
#4 Reflash the ROM w/o full wipe and reboot.
#5 Enjoy
I mean this error:
http://forum.xda-developers.com/showpost.php?p=31976376&postcount=3188
Sorry for my bad English.

[Q] Issues with vijendrahs's [ROM/4.1.2] [Dec 19 2012] CM10 | Jelly Bean 4.1.2 - v3.0

Yes, I know this belongs in the thread for this ROM, but I'm still trying to hit 10 posts without spamming.
Three issues with v3.0 -
1. It wiped my APNs
2. I can enter new APN info but it does not save, even after I hit "Save," so I have no no phone, sms, or data
3. The Home button doesn't work
Any suggestions for fixes, particularly for the APN issue?! Rolling back to 2.7 for now.

Same to me,but only when try to flash a new RIL,otherwise apn is set right.
Flashing new RILS (various version ) got the signal lost,i don't know why.
Sent from my MP711I using xda app-developers app

Bizarrely enough, all problems resolved
Okay, so my APNs suddenly went away in 2.7, I couldn't get the phone to re-read them, and couldn't get it to accept new entries. I confirmed that the apns-conf.xml file was present and that it contained the correct info for my provider.
What the heck, I re-flashed 3.0. Still no APNs, still no home button. So I tried changing one setting after another trying to see if it would trigger a re-read of the APN file. Switching airplane mode on and off didn't do it, but whether by coincidence or not, after locking and then unlocking the phone, suddenly I had four bars AND the home key worked.
So, if you were holding off trying 3.0, give it a shot. VJ says "let it settle" after flashing -- I guess that what he means is it just takes a good long while for the system to get everything up and running.

I had issues with that ROM starting from version 2.7, and with the AOKP as well,
after some usage, the phone will freeze and restart, after that my home button will not work, all of the system configuration would wipe out, the Google play button in the drawer will vanish and so on.....
I think it is got to do with the a2sd script, I've tried using m2sd instead and the problem hasn't happened again...
so if you are experiencing the same problem try this....

Sorry but home button work on every rom wich i used. Issue of apn happen to me when try to flash another ril, i don't know a way to fix, but is a strange situation when flash a fresh rom. Have you performed a full wipe? Or better a full format except fat32?
Sent from my HTC Desire using xda app-developers app

[Q] No mobile data?!

I've flashed a few custom ROM, and I usually mess around with them where I have wifi access, but just realised that I have no mobile data on any that I have tried.
ROMs I've used:
IceColdJelly AOKP
LiquidSmooth AOSP
Slim Bean
Has any one else found this? Can't do anything while I'm out of the house/office etc!!

Try to re-enter the APN settings

Flashed boot.img?
Sent from my One X

It wasn't working at all yesterday but after a restart this morning it seems to be fine... very strange.

Hmm oke, lets keep it that way

[Q] Going from Cyanogenmod 10.0 to 10.1?

is there a way to go from 10.0 to 10.1 (Cyanogenmod) in a dirty flash or is the only way to do a wipe? I flashed the 3/13 nightly and either I accidentally set a switch to wipe or that is the only way to go up... can anyone let me know please?

tgeery said:
is there a way to go from 10.0 to 10.1 (Cyanogenmod) in a dirty flash or is the only way to do a wipe? I flashed the 3/13 nightly and either I accidentally set a switch to wipe or that is the only way to go up... can anyone let me know please?
Click to expand...
Click to collapse
answered my own question, I think. I did NOT turn on the wipe data & cache and it appears to be just doing an "upgrade" install - it is optimizing apps on the first reboot.
I'll post back again with any further details...

cm10 is 4.1.2 based, and cm10.1 is 4.2.2 based. lots of big changes, eg sdcard folder structure. full wipe is highly recommended.

strumcat said:
cm10 is 4.1.2 based, and cm10.1 is 4.2.2 based. lots of big changes, eg sdcard folder structure. full wipe is highly recommended.
Click to expand...
Click to collapse
yeah, I just did a dirty flash and I am seeing some funny behaviors in some things so I may just do that. I hate having to redo the world but then, I put a lot of emphasis on having the phone behave, too...
thanks.

strumcat said:
cm10 is 4.1.2 based, and cm10.1 is 4.2.2 based. lots of big changes, eg sdcard folder structure. full wipe is highly recommended.
Click to expand...
Click to collapse
did a wipe data & cache and rebuilt with 10.1 and things seem to be working well so far... thanks for the push.

although, I will say that this version of CM (yes, a nightly so it is expected) is buggy. the lock screen toggle doesn't work (even after a wipe install) consistently (sometimes does, sometimes doesn't) and I've discovered at least two apps or widgets that no longer work with this ROM - either they don't work with the CM version of 4.2.2 or they are incompatible with 4.2.2 itself, not sure... but the Airplane mode toggle widget doesn't work at all and I use an app called Timeriffic and the airplane mode toggle in that app doesn't work either.
researching both of those to see if I can find any more info...

tgeery said:
although, I will say that this version of CM (yes, a nightly so it is expected) is buggy. the lock screen toggle doesn't work (even after a wipe install) consistently (sometimes does, sometimes doesn't) and I've discovered at least two apps or widgets that no longer work with this ROM - either they don't work with the CM version of 4.2.2 or they are incompatible with 4.2.2 itself, not sure... but the Airplane mode toggle widget doesn't work at all and I use an app called Timeriffic and the airplane mode toggle in that app doesn't work either.
researching both of those to see if I can find any more info...
Click to expand...
Click to collapse
haven't been able to get WiFi Tether (the app) to work and can't get built in wifi tether to work either... between that and a few other issues, seriously considering going back to 10.0 from a backup until things get a little better refined. love the new features but I really use wifi tether and I'm not finding any good info on what to do to fix the problem...

ParanoidAndroid 4.4.2 Kit Kat

Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks

bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.

bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
Redstarr1 said:
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.
Click to expand...
Click to collapse
That is very well said redstarr1 but i dont quite feel as strongly about it as you. I just see it as a logical statement. However it would help if you can expand on your issues somewhat. Did you do a clean install (wipe data / system / cache / dalvik) or just a dirty flash over the top. What network do you connect too and have you tried Changing your carrier in "access point names". Creating a whole thread for an issue but not elaborating on what you have and havent tried really makes it hard to help.

Beta 5
Hi guys,
The latest update beta 5 works just fine but a few bugs.
Sometimes the back button doesn't work, have to restart the phone for it to start working again.
When charging the wireless is activated, and the battery takes longer to charge.
The phone lags now and then but other than that works fine.
If anyone who can post this on the Xperia S development thread I would really appreciate it, I don't have rights to post on the development thread as yet.
Thanks

Beta 6
Hi guys,
The new update of Beta 6 for Paranoid is brilliant.
After the 1st boot the phone is a little slow but after the rom has settled it's very smooth.
So far all I have tested works perfectly, don't like the launcher much though, so I have my own custom launcher, Next launcher works brilliantly and very customizable. The new launcher's that are added aren't very good and would like if they could get the original launcher if possible.
Other than that all is well.
Thanks Paranoidanroid.

Pa beta 4.3 13052014
Thanks deedwar...the rom(PA 4.3 Beta 13052014) works like a charm. My battery lasts for a day...with data on(3G)....although there is issue of random reboots and the date setting to 1972th year...but i think it will be resolved in the next version i.e. Beta 5/6....Love your work..really appreciate it. :good:

Beta 6
Beta 6 is out..!! Great...!! Trying it now..!!

What about VOIP apps(Viber, line etc.) ? do they work on the latest build ? Cheers.

The latest build
Yes, the VOIP does work..(Viber, Skype etc.,)on the latest builds ..however, I am having a few system UI crashes while using option of any app from the notification bar..like when you're downloading an app from Playstore and which you wish to stop or pause from the by pulling down the notification bar. or using controls of the stock android walkman app.

---

is this room can accept for xpeeria sl lt26ii
plz help me ti find room to my phone 4.4.2
and how can use this room to my phone

I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?

How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
agugar said:
I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?
Click to expand...
Click to collapse

mgrinwis said:
How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
Click to expand...
Click to collapse
I did factory reset, wipe cache and wipe dalvik but It didn't work.
I had some troubles trying to restore an old backup after the last failed installation. After the failed restore I tried to install Beta 7 again and It worked. I do not know why, but now I have beta7 working perfectly.
Thanks for your help.

problem with Ant+ on Paranoidandroid 4.3
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.

rednose2 said:
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.
Click to expand...
Click to collapse
Unfortunately, ant+ does not work with android version 4.3 and onwards. This has something to do with the drivers I believe (not sure though). So it doesn't matter which ROM you try: all 4.3.x or 4.4.x will not have ant+ support...

Having FCs updating from beanstalk to paranoid
Hey guys! I recently have the beanstalk rom of deedwar for the Acro S and using the current stable build of the rom which is 4.4.278 then i want to try paranoid so heres what i did
1. I copied the paranoid zip file to my phone
2. Flashed the IMG file from the latest version of paranoid rom via Fastboot mode (i extracted it first)
3. Cleared system, factory reset, cache and dalvik cache
4. Installed the zip file
Well it worked and i have the rom but i experienced random FCs so i just reverted back to stock 4.1 ROM and also i am having trouble with some APPS too.. some apps install perfectly but sometimes they dont

WiFi problem :/
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help

alessandropsbra said:
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help
Click to expand...
Click to collapse
i installed a new kernel, now wifi works.