I rooted and debloated my s2 not expecting an official update as with my vibrant. So now I hear ICS is in kies but it won't let me DL. Recognized my phone and said update available. Starts dling and at 100% lies just shuts down any suggestions ?? Thx in advance
firmware upgrade failure fix
Easiest fix its to use kies to do an emergency firmware restore. hopefully you made a backup before starting the upgrade. if not then you can restore to stock using kies and the model and serial numbers of your device located under the battery. leave the batter out during the restore and don't let the pc battery get low nor lose internet connection or you'll have a $500 paper weight. after the restore is complete you can use odin to reflash cwm and then reinstall super user binaries through the custom recovery. if windows gives you problems with odin, as it did me after working just fine the first go around then you probably need to update 7-zip if you have that as a file compression app on your pc. and if you do i recommend switching over to jzip instead. you can get it free just google it. let me know if you have any more questions and I'll be glad to help further.
I had no problem updating my rooted and debloated S2 last weekend. Make sure you update Kies first.
Telyx said:
I had no problem updating my rooted and debloated S2 last weekend. Make sure you update Kies first.
Click to expand...
Click to collapse
What was in the update? I got an OTA notification that there is a software update for my SGSII (running ICS 4.0.4). Why do I need to use Kies?
You don't need to if you got the OTA notification.
Related
My T-Mobile Galaxy Note 2 was rooted by Odin, so the system said that the device has been modified, software updates are not available when I checked for the Software updates (for the new released multi-window feature,cool). The device is still with its stock rom but only rooted.
Is there anyway to get the device updated ? Thanks
Screen shots are attached:
I hooked up the phone to PC and updated via Kies. Works okay but I lost root, and device now says normal. There's prolly some way to keep root, but overall no big deal to me..
lalab0y said:
I hooked up the phone to PC and updated via Kies. Works okay but I lost root, and device now says normal. There's prolly some way to keep root, but overall no big deal to me..
Click to expand...
Click to collapse
yeah, I tried Kies,but it failed,leaving me a screen saying that the update has encountered an issue and suggesting me to try rebuild the connection again, but actually the computer didn't recognize the device anymore. It ends up refleshing a stock rom using Odin. But the apps and data was still there and I got a OTA update...of course, the root was gone anyway ,thanks a lot.
Use triangle away, the the unroot option in superuser. Viola ! stock device ready for updates !
Hi I was rooted using cmenards int rom and I decided top use odin to go back to stock so I could do the update so I can get the new modem. It is how I have always done things when an update comes out even though I know I am going to root and use a custom I like to have a currrent stock backup and the latest modem. I am not new to this.so I dont know what is up.
I am using pc odin 3.07 i put the file in PDA and I tried to install the twrp with odin and it says that it worked but when I boot into recovery it is still stock. So I tried the CWM for the 7100 with the same results. (both of them I have used before with no problem) So I tried to redownload everything still the same resutls then I tried resetting everything and no luck. I gotta say I am stumped. The only thing I can think of is I was going to use kies to do the update but it was on my pc before but It hads to do an update so maybe the updated version of kies is doing something annd as it turned out I didnt need to use kies I just used the ota. So I am uninstalling it now as I type but I dont think it will do anything.
Can anyone help me please?
mojorisin7178 said:
Hi I was rooted using cmenards int rom and I decided top use odin to go back to stock so I could do the update so I can get the new modem. It is how I have always done things when an update comes out even though I know I am going to root and use a custom I like to have a currrent stock backup and the latest modem. I am not new to this.so I dont know what is up.
I am using pc odin 3.07 i put the file in PDA and I tried to install the twrp with odin and it says that it worked but when I boot into recovery it is still stock. So I tried the CWM for the 7100 with the same results. (both of them I have used before with no problem) So I tried to redownload everything still the same resutls then I tried resetting everything and no luck. I gotta say I am stumped. The only thing I can think of is I was going to use kies to do the update but it was on my pc before but It hads to do an update so maybe the updated version of kies is doing something annd as it turned out I didnt need to use kies I just used the ota. So I am uninstalling it now as I type but I dont think it will do anything.
Can anyone help me please?
Click to expand...
Click to collapse
It's a known issue on newer android devices, it will automatically reflash the stock recovery. Try using goomanager or exynos abuse, I'm positive one will ask you if you want to disable it (I remeber it popping up)
Oooh I read about that so thats what it is. Goo manager does not work I tried but what is ths other thing. I guess I have to get it here? I will google it I see it is not in market thank you. So if that does not work how do I get around this?
Okay I figured it out. And I actually didnt even haver to hook up to my pc. I was ****ting (which is where I come up with all my good ideas.) And I remember reading about the security hole in the exynos processor and the app chainfire came up with. Which turns out to be the exynos abuse app that killahurtz was talking about. So I remembered that with the app you can use the exploit to root so I downloaded the .apk and installed and rooted and then used goo.im app to install the latest twrp. So thanks to killahurtz for recomending it and chainfire for the app and exploit and samsung for being a little bit dopey One thing I am still wondering is how would you solve this problem if the security hole did not exist? I know I saw something in the toolkit about it So if this didnt work would In have been able to hookup tob the pc and use the toolkit without having root access?
In ExynosAbuse, it gives you the option to plug the hole after you have rooted, only thing is you may break your camera in the process. I would just stay away from pirated and sketchy apps for now.
I'm having problems completing a firmware upgrade on my wife's Galaxy S2. It's at ICS and I want to get it to Jelly Bean. We're using the horrible Samsung program Kies, which is hosting the update to us. It sees the S2 fine... No problems there. It identifies the phone and tells us there's a newer firmware version we can download. Every time I perform the update, it downloads the firmware and when it reboots the phone, I get an error that the device can't be found and I should try again. When I go in device manager, I see an exclamation point on Samsung Mobile USB CDC Composite Device and it says the device couldn't be started.
It looks as thought, when the phone reboots to download the firmware from the laptop after the laptop has the firmware, Kies isn't seeing the phone. So I did vol-up-down to get it in programming mode and then reinitiated the download. That little trick doesn't work since Kies isn't identifying the device.
I've checked that I have the most current drivers, which I do. I've uninstalled them and reinstalled them and uninstalled Kies and reinstalled Kies and still get the error. I've also already updated the firmware on my Galaxy S3 using Kies on this computer and it worked fine. Now when I do it on my wife's S2, it bombs.
I then loaded Kies on another laptop and it's even worse. It downloads the firmware update and the entire application totally crashes.
I've gone to T-Mobile and they can't help with anything. They suggested turning USB Debugging on in the Developer Options on the phone, which I did. Still, nothing.
I located the hooks in the registry editor for the CDC composite device driver and everything *looks* good, as far as I can tell. Driver is dated 1/23/2013. As I said, it updated the firmware on my S3 fine... It just won't do it on my wife's S2. I don't know what to do.
Can anyone provide any advice or help? I've spent about 11 hours on this over two days and am running out of ideas.
-Paul
premington said:
I'm having problems completing a firmware upgrade on my wife's Galaxy S2. It's at ICS and I want to get it to Jelly Bean. We're using the horrible Samsung program Kies, which is hosting the update to us. It sees the S2 fine... No problems there. It identifies the phone and tells us there's a newer firmware version we can download. Every time I perform the update, it downloads the firmware and when it reboots the phone, I get an error that the device can't be found and I should try again. When I go in device manager, I see an exclamation point on Samsung Mobile USB CDC Composite Device and it says the device couldn't be started.
It looks as thought, when the phone reboots to download the firmware from the laptop after the laptop has the firmware, Kies isn't seeing the phone. So I did vol-up-down to get it in programming mode and then reinitiated the download. That little trick doesn't work since Kies isn't identifying the device.
I've checked that I have the most current drivers, which I do. I've uninstalled them and reinstalled them and uninstalled Kies and reinstalled Kies and still get the error. I've also already updated the firmware on my Galaxy S3 using Kies on this computer and it worked fine. Now when I do it on my wife's S2, it bombs.
I then loaded Kies on another laptop and it's even worse. It downloads the firmware update and the entire application totally crashes.
I've gone to T-Mobile and they can't help with anything. They suggested turning USB Debugging on in the Developer Options on the phone, which I did. Still, nothing.
I located the hooks in the registry editor for the CDC composite device driver and everything *looks* good, as far as I can tell. Driver is dated 1/23/2013. As I said, it updated the firmware on my S3 fine... It just won't do it on my wife's S2. I don't know what to do.
Can anyone provide any advice or help? I've spent about 11 hours on this over two days and am running out of ideas.
-Paul
Click to expand...
Click to collapse
First u got check USB debugging ON (on the phone)
disable anti virus on the pc/laptop
kies will put your phone into download mode and will take awhile (Kies is super slow) for good reasons
Also consider rooting your phone and install custom recovery (CWM) and flash all the rom(s) you wish [if that's an option]
hit Thanks if i helped
Thanks for the help, Sam.
I'll try it again with the virus protection off. I disabled the Windows firewall and that did nothing. I've tried it about 12 to 15 times, which takes a long time because Kies takes so long to download what it needs.
Can I root a T-Mobile phone? I used to have a Motorola Atrix 2 and rooted that and did manual firmware and ROM upgrades, but that was an unlocked and rooted phone. I'm afraid I may screw up the phone or my T-Mobile service by rooting it and doing custom installs. Does anyone have experience with this on a T-Mobile phone they purchased at T-Mobile? I don't want to mess the phone up.
At this point, I think that's the only way I'm going to go Jelly Bean on my wife's phone.
-Paul
Rooting your s2 is simple and easy to do. Go to the dev section and look at the threads on how to do it.
You will use Odin to flash a custom recovery such a TWRP whick will install supersu. At that point you can flash the ROM of your choice and not have to deal with Kies anymore.
Hope this helps
Sent from my SAMSUNG-SGH-T989 using xda premium
use this as a ref. http://galaxys2root.com/galaxy-s2-root/how-to-root-t-mobile-galaxy-s2-sgh-t989/
make sure to backup your current ROM as soon as your get root& cwm
after that u can flash any rom here is a list :http://www.androidmodmarket.com/ModMarket/Devices/Device-XDA-F-1332.html
i think u will like a clean fast 4.2.2 (jb) rom like slimbean....
try 'em & see which one u like......xda is your best bet for help & just about anything ROM
hit thanks if u like
sam.balia1012 said:
use this as a ref. http://galaxys2root.com/galaxy-s2-root/how-to-root-t-mobile-galaxy-s2-sgh-t989/
make sure to backup your current ROM as soon as your get root& cwm
after that u can flash any rom here is a list :http://www.androidmodmarket.com/ModMarket/Devices/Device-XDA-F-1332.html
i think u will like a clean fast 4.2.2 (jb) rom like slimbean....
try 'em & see which one u like......xda is your best bet for help & just about anything ROM
hit thanks if u like
Click to expand...
Click to collapse
This is all great information... Thanks so much. I've pressed "Thanks" to each of you. :good:
-Paul
I searched all yesterday and today and cannot re-root after upgrading from 4.1.2 to 4.3. I always do a ton of searchs no matter what forum I'm on because I don't want to seem lazy like some others out there but this is beyond me. I registered so I could make a thread and this is what I have and the situation:
Samsung Galaxy S3 SCH-R530U
US Cellular
upgraded from 4.1.2 to 4.3
kernel 3.031-2025306 [email protected] #1
baseband version R30UVXUBMJA
build number JSS15J.R530UVXUBMJA
SE for Android status Enforcing SEPF_SCH-530U_4.3_0010
hardware version R530U.01
Previously rooted using Odin, SuperSU, Titanium Backup Pro, ODIN_CWM6.tar.md5
I took the phone back to stock using unroot through SuperSU and upgraded from 4.1.2 to 4.3 OTA with no problems. I've been trying to re-root using numerous combinations (ODIN3 v3.07) and no matter what I do the Samsung Security notice blocks rights to SuperSU (beta v1.76) and Titanium Backup Pro so it won't root. This is the message I get:
"Security notice - unauthorized access to a secured area has been blocked. Tap to learn more."
The most recent md5 file I've tried is CF-Auto-Root-d2usc-d2usc-schr530u.tar.md5 but nothing else has worked either. I'm at my wits end and my brain is about ready to explode. I just need to be able to access Titanium Backup Pro so I can shut off a few programs and processes. Any help is VERY VERY much appreciated. Thanks!!!!!
TTT for some help please.
jguenther said:
I searched all yesterday and today and cannot re-root after upgrading from 4.1.2 to 4.3. I always do a ton of searchs no matter what forum I'm on because I don't want to seem lazy like some others out there but this is beyond me. I registered so I could make a thread and this is what I have and the situation:
Samsung Galaxy S3 SCH-R530U
US Cellular
upgraded from 4.1.2 to 4.3
kernel 3.031-2025306 [email protected] #1
baseband version R30UVXUBMJA
build number JSS15J.R530UVXUBMJA
SE for Android status Enforcing SEPF_SCH-530U_4.3_0010
hardware version R530U.01
Previously rooted using Odin, SuperSU, Titanium Backup Pro, ODIN_CWM6.tar.md5
I took the phone back to stock using unroot through SuperSU and upgraded from 4.1.2 to 4.3 OTA with no problems. I've been trying to re-root using numerous combinations (ODIN3 v3.07) and no matter what I do the Samsung Security notice blocks rights to SuperSU (beta v1.76) and Titanium Backup Pro so it won't root. This is the message I get:
"Security notice - unauthorized access to a secured area has been blocked. Tap to learn more."
The most recent md5 file I've tried is CF-Auto-Root-d2usc-d2usc-schr530u.tar.md5 but nothing else has worked either. I'm at my wits end and my brain is about ready to explode. I just need to be able to access Titanium Backup Pro so I can shut off a few programs and processes. Any help is VERY VERY much appreciated. Thanks!!!!!
Click to expand...
Click to collapse
I have same phone. Recently went to Slimbean (4.3.1). I have Triangle Away and it couldn't access root. I also used CF-Auto-Root. Used a root check app, it says I am rooted. Odin also said device passed. Super User says I am missing a binary and I need to root manually. Trying to find that info
If you find anything out please let me know. A root checker says I'm rooted but I can't access SuperSU or Titanium backup as the S3 is blocking it.
Did you get the Slimbean 4.3.1 for USCC and if so where?
There was just a new SuperSU update and it granted me access to everything. I asked if I wanted it to disable KNOX and I said yes. Titanium Backup works and so does Triangle Away. I think I'm good to go.
How did you update?
jguenther said:
There was just a new SuperSU update and it granted me access to everything. I asked if I wanted it to disable KNOX and I said yes. Titanium Backup works and so does Triangle Away. I think I'm good to go.
Click to expand...
Click to collapse
How did you update to 4.3? Did you use the simple update you can download to computer, or did you use Kies? I'm not having any luck with either. I chatted twice with a Samsung Tech person, but neither one had any help for me. Just thought I'd check to see if you could help me. It's not easy finding someone else on here with US Cellular. Any help would be appreciated. Thank you.
smithar said:
How did you update to 4.3? Did you use the simple update you can download to computer, or did you use Kies? I'm not having any luck with either. I chatted twice with a Samsung Tech person, but neither one had any help for me. Just thought I'd check to see if you could help me. It's not easy finding someone else on here with US Cellular. Any help would be appreciated. Thank you.
Click to expand...
Click to collapse
I tried to download the simple update but my phone wouldn't update to the 4.3 so I did it over the air. You probably know but the OTA software update is in "about device." We have four S3s in our home and only one of them hasn't been able to get the download OTA yet. The only bug that I've found is when you start the phone it will show numerous downloads in the notifications and they will come back even if you clear them. The way to get rid of them is to go to the download icon (green arrow) and clear all the downloads and restart. Hope this helps.
jguenther said:
I tried to download the simple update but my phone wouldn't update to the 4.3 so I did it over the air. You probably know but the OTA software update is in "about device." We have four S3s in our home and only one of them hasn't been able to get the download OTA yet. The only bug that I've found is when you start the phone it will show numerous downloads in the notifications and they will come back even if you clear them. The way to get rid of them is to go to the download icon (green arrow) and clear all the downloads and restart. Hope this helps.
Click to expand...
Click to collapse
I have downloaded the simple update, but get an error msg while trying to install to computer. (1152: error extracting) whatever that means. I uninstalled all Samsung anything from my computer, restarted, shut off firewall & Norton, downloaded again, but same thing while trying to install to computer. I updated to 4.1.2 this way, but keep getting an error on 4.3 update.
I tried to go through Kies. It updated Kies to 2.6, it said Kies3 was for 4.3. When I tried to hook into Kies, it refuses to accept my IMEI #. Says its incorrect. wth. The Samsung Chat Tech told me USCellular 4.3 update wasn't available yet through Kies OTA.
When I tried to get the 4.1.2 update through the phone, it would never give it to me. Even though I unrooted and used Triangle Away, it still knew my sg3 was modified. Maybe I'm doing something wrong. Do you have any suggestions ? I'm not very tech savvy when it comes to these phones.
I'm sorry to bother you with this, but it's rare to find someone with USCellular on here. Thank you so much for your time.
I got the error message too so something is wrong with the download from Samsung/USCC. Just keep trying to do the OTA update and maybe it will go through. My GUESS is that Samsung and USCC stopped doing the update because of a couple bugs or issues. The reason I say that is I updated mine one day (worked), my wife's the next (worked), my son's the next days later (worked) and tried my other son's a couple days later and no update for him. I unrooted mine before the update without doing triangle away so I don't know if that really has anything to do with it at all. However, it does have to be unrooted if you do the OTA. Good luck!
I used Triangle Away, then unrooted. My phone still says 'modified' even though counter no longer says 2. When I try OTA through the phone, it constantly sticks on 'checking for updates'. I'm sure it's because it still says modified. I tried using Kies, my phone will not connect. Keeps saying my s/n is incorrect. I understand my IMEI has been corrupted.
I have started a thread on here for some help in how to get the 4.3 update.
Thank you so much for trying to help me. I will be eligible for an upgrade soon. I just may have to wait to have anything more than 4.1.2.
Again, thank you.
Samsung
jguenther said:
I searched all yesterday and today and cannot re-root after upgrading from 4.1.2 to 4.3. I always do a ton of searchs no matter what forum I'm on because I don't want to seem lazy like some others out there but this is beyond me. I registered so I could make a thread and this is what I have and the situation:
Samsung Galaxy S3 SCH-R530U
US Cellular
upgraded from 4.1.2 to 4.3
kernel 3.031-2025306 [email protected] #1
baseband version R30UVXUBMJA
build number JSS15J.R530UVXUBMJA
SE for Android status Enforcing SEPF_SCH-530U_4.3_0010
hardware version R530U.01
Previously rooted using Odin, SuperSU, Titanium Backup Pro, ODIN_CWM6.tar.md5
I took the phone back to stock using unroot through SuperSU and upgraded from 4.1.2 to 4.3 OTA with no problems. I've been trying to re-root using numerous combinations (ODIN3 v3.07) and no matter what I do the Samsung Security notice blocks rights to SuperSU (beta v1.76) and Titanium Backup Pro so it won't root. This is the message I get:
"Security notice - unauthorized access to a secured area has been blocked. Tap to learn more."
The most recent md5 file I've tried is CF-Auto-Root-d2usc-d2usc-schr530u.tar.md5 but nothing else has worked either. I'm at my wits end and my brain is about ready to explode. I just need to be able to access Titanium Backup Pro so I can shut off a few programs and processes. Any help is VERY VERY much appreciated. Thanks!!!!!
Click to expand...
Click to collapse
it looks to me like samsung are finally making a stand against rooting although i do not agree with this as i use an app called freedom and when i open it i get a security issue from Samsung
The only reason i left iphone for samsung was because i felt like they had something other apple with hardware and i was happy to do this as i could get root access but for now i see that this might not be possible for a while.
i recommend installing a normal superuser.apk and that might work but i cannot check this right now as i am out
i hope this little bit of information did help in anyway
I'm trying to update my tab 3 8.0 but I'm rooted. Is there any way to to update without unrooting?
It keeps saying this device has been modified no updates available
you could unroot if you're using super su. not sure how to do that with superuser.
if you've modified /system/app in any way you're likely to have issues as well.
There's an update? I don't see one....but...after ONLY 5 months with no love......kinda disappointed I got this thing. My Nexus 10's been updated numerous times in the same period.
Do you have a custom recovery installed? If you could download the update then you could flash it through your recovery. You can usually find firmware here http://www.sammobile.com/firmwares/ (I don't see anything new) You can also use Kies to return your tablet back to stock using the emergency recovery feature. You have to run Kies from a computer and connect via USB cable to do it.
Lantec said:
There's an update? I don't see one....but...after ONLY 5 months with no love......kinda disappointed I got this thing. My Nexus 10's been updated numerous times in the same period.
Do you have a custom recovery installed? If you could download the update then you could flash it through your recovery. You can usually find firmware here http://www.sammobile.com/firmwares/ (I don't see anything new) You can also use Kies to return your tablet back to stock using the emergency recovery feature. You have to run Kies from a computer and connect via USB cable to do it.
Click to expand...
Click to collapse
Flash the original Stock FW... then do all your updates...
(Mine did 2 over the weekend..)
After your updates, then re-root.
good luck
Yeah I wouldn't say I'm disappointed but kinda wish I went with a note tab. I just figured there was a update because that message come up when I tap update.
hinds90 said:
Yeah I wouldn't say I'm disappointed but kinda wish I went with a note tab. I just figured there was a update because that message come up when I tap update.
Click to expand...
Click to collapse
Mine came with 4.2.2 tab3 8inch T315
It did 2 OTA updates over the weekend...
Still at 4.2.2
I dont think that youre missing anything actually..
you porbally wont notice a thing at 4.2.2 AGAIN..
wait till you hear about a 4.2.3 or a higher...kit kat....
then re-flash stock./. OTA updates /.. then re-root... IMHO dont fret it...
good luck