I just purchased a Samsung Galaxy S III I747M through Bell, but am a bit lost with ROM flashing. I flashed to new ROM's quite frequently on my old Motorola Milestone, but I am a bit confused with the ROM's for the S III since there are so many variants.
My main question is, as a Bell user am I limited to only d2bell roms or can I change information in the build props or elsewhere to flash d2att roms? I am currently running rooted CWM-based Recovery v5.5.0.4 and my have been unsuccessful so far in flashing ROMs.
NorskHelgen said:
I just purchased a Samsung Galaxy S III I747M through Bell, but am a bit lost with ROM flashing. I flashed to new ROM's quite frequently on my old Motorola Milestone, but I am a bit confused with the ROM's for the S III since there are so many variants.
My main question is, as a Bell user am I limited to only d2bell roms or can I change information in the build props or elsewhere to flash d2att roms? I am currently running rooted CWM-based Recovery v5.5.0.4 and my have been unsuccessful so far in flashing ROMs.
Click to expand...
Click to collapse
I rooted using this tutorial and afterwords cwm recognized my phone as d2att and have had zero problems flashing any ROMs.
I'm on Telus BTW so I know what its like crossing beyond the d2can label
Sent from my SGH-I747 using xda app-developers app
I had the same problem but prefer twrp over cwm so all I did was change my build.prop in rom toolbox, then downloaded goo.im from the playstore. You can flash twrp in app and because I changed the build.prop to say dtatt instead of d2can,it installed the at&t recovery, now I have no problem flashing anything. Hope that helps.
Sent from my SGH-I747M using xda app-developers app
jbradbury said:
I had the same problem but prefer twrp over cwm so all I did was change my build.prop in rom toolbox, then downloaded goo.im from the playstore. You can flash twrp in app and because I changed the build.prop to say dtatt instead of d2can,it installed the at&t recovery, now I have no problem flashing anything. Hope that helps.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Ya I forget top say to upgrade top twrp after. I will never go back to cwm
Sent from my SGH-I747 using xda app-developers app
jbradbury said:
I had the same problem but prefer twrp over cwm so all I did was change my build.prop in rom toolbox, then downloaded goo.im from the playstore. You can flash twrp in app and because I changed the build.prop to say dtatt instead of d2can,it installed the at&t recovery, now I have no problem flashing anything. Hope that helps.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
i initially got twrp via goo w/o chaning d2can to d2att. I've made backups etc already.
If i decide to change to d2att and resintall twrp as d2att
1) can I use the older d2can backups?
2) does reinstalling it on top of d2can's twrp work?
thanks!
Twrp it is. So KoryGuy123, when you rooted your Telus S III you used the AT&T root on Odin?
Sent from my SGH-I747M using xda app-developers app
NorskHelgen said:
Twrp it is. So KoryGuy123, when you rooted your Telus S III you used the AT&T root on Odin?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
If you can wait until I get off work I'll find you the proper file.
Sent from my SGH-I747 using xda app-developers app
NorskHelgen said:
Twrp it is. So KoryGuy123, when you rooted your Telus S III you used the AT&T root on Odin?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B5vBKK_jIaGAWXJOcWVwWUFoMFE/edit
From this video.
https://www.youtube.com/watch?v=_zPrnbJasFs&feature=youtube_gdata_player
I flashed that recovery, downloaded too manager and it recognized my phone as d2att and installed the latest twrp and flash ROMs away.
Nandroid of course before doing anything
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
https://docs.google.com/file/d/0B5vBKK_jIaGAWXJOcWVwWUFoMFE/edit
From this video.
https://www.youtube.com/watch?v=_zPrnbJasFs&feature=youtube_gdata_player
I flashed that recovery, downloaded too manager and it recognized my phone as d2att and installed the latest twrp and flash ROMs away.
Nandroid of course before doing anything
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
korguy
Does changing from a d2can to d1att version of twrp work the same way? I can just flash on top of the existing wihtout any uninstalls and im assuming the d2att can still load d2can backups?
I know twrp are backward compatible, but are they cross version compatible?
mikoal said:
korguy
Does changing from a d2can to d1att version of twrp work the same way? I can just flash on top of the existing wihtout any uninstalls and im assuming the d2att can still load d2can backups?
I know twrp are backward compatible, but are they cross version compatible?
Click to expand...
Click to collapse
I honestly have no idea. I know twrp update through goo manager is automatic so you would have to manually install it.
If you flash that recovery file it only changes your version of cwr.
Sent from my SGH-I747 using xda app-developers app
Got it figured out now, ROMs are flashing without a problem. Thanks for the tips guys, I was beyond lost.
NorskHelgen said:
Got it figured out now, ROMs are flashing without a problem. Thanks for the tips guys, I was beyond lost.
Click to expand...
Click to collapse
You're welcome. Do me two favors please... Hit thanks and write your steps down here for anyone else having the same issues. This gets brought up often.
Sent from my SGH-I747 using xda app-developers app
I hit "thanks" and I will be sure to write the steps the worked for me tonight.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Good to see you fix your issue just FYI the bell phone will flash any Canadian rom or any ATT rom without problem
Just don't flash other modems than those set for this variant.
Sent from my GT-P7500 using xda app-developers app
KorGuy123 said:
https://docs.google.com/file/d/0B5vBKK_jIaGAWXJOcWVwWUFoMFE/edit
From this video.
https://www.youtube.com/watch?v=_zPrnbJasFs&feature=youtube_gdata_player
I flashed that recovery, downloaded too manager and it recognized my phone as d2att and installed the latest twrp and flash ROMs away.
Nandroid of course before doing anything
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Awesome. Thanks for this. I'm already rooted, using the allinone toolkit. What would I have to flash to make my phone be recognized as d2att? The whole Galaxy s3 Root.zip thats mentioned?
Caduceus46 said:
Awesome. Thanks for this. I'm already rooted, using the allinone toolkit. What would I have to flash to make my phone be recognized as d2att? The whole Galaxy s3 Root.zip thats mentioned?
Click to expand...
Click to collapse
If you are running clockworkmod recovery, go into rom manager, select update recovery, and chose d2att instead of d2can
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
If you are running clockworkmod recovery, go into rom manager, select update recovery, and chose d2att instead of d2can
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Damn! The one time CWM is more useful than TWRP and I don't have it. I'm kind of new to all this, how would I switch to CWM?
Caduceus46 said:
Damn! The one time CWM is more useful than TWRP and I don't have it. I'm kind of new to all this, how would I switch to CWM?
Click to expand...
Click to collapse
In that video is a Odin flashable file... That's cwm, it'll overwrite twrp than you download ROM manager and update cwm. After that you can reinstall twrp and it'll be for d2att
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
In that video is a Odin flashable file... That's cwm, it'll overwrite twrp than you download ROM manager and update cwm. After that you can reinstall twrp and it'll be for d2att
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ah, the one named RecoveryGalaxyS3USCanada?
Caduceus46 said:
Ah, the one named RecoveryGalaxyS3USCanada?
Click to expand...
Click to collapse
Yup. Its a zip. In there is a .tar file you'll flash to put cwm on.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Related
I'm helping my friend install cyanogenmod on his sgh-i747m (telus), and we are having great difficulty. The phone is rooted, and TWRP 4.2.2 (or whatever's newest) is installed from the goomanager app. On everything he tries he gets a status 7 error. Phone is always wiped prior to flash, both internal and external memory have been tried, and the rom has been redownloaded several times. Even tried cm10 stable and PA 3.0.
Any suggestions? Could using cwm instead of twrp help? If so how do I replace twrp with cwm?
Going to sleep hoping there will be some suggestions in the morning. Thanks in advance.
Yeah try cwm. But that error usually means your on an outdated recovery. So make sure its the latest twrp
Sent from my SGH-I747 using xda app-developers app
Yeah, that's sounds like an outdated recovery issue. download rom manager and install cwm if you want to give that a shot.
LeonardLP said:
I'm helping my friend install cyanogenmod on his sgh-i747m (telus), and we are having great difficulty. The phone is rooted, and TWRP 4.2.2 (or whatever's newest) is installed from the goomanager app. On everything he tries he gets a status 7 error. Phone is always wiped prior to flash, both internal and external memory have been tried, and the rom has been redownloaded several times. Even tried cm10 stable and PA 3.0.
Any suggestions? Could using cwm instead of twrp help? If so how do I replace twrp with cwm?
Going to sleep hoping there will be some suggestions in the morning. Thanks in advance.
Click to expand...
Click to collapse
Yo can also get a status 7 if your phone is marked as a d2can. Some ROMs have a device check prior to flashing to prevent a brick. You have to install a recovery as a d2att and they'll flash.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Yo can also get a status 7 if your phone is marked as a d2can. Some ROMs have a device check prior to flashing to prevent a brick. You have to install a recovery as a d2att and they'll flash.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
^^^^^^true story
Flash a d2att recovery. TWRP latest is 2.4.2.0... So what you said seems right. If he got from too it will always flash the latest. Try to to find d2 art recovery. Its linked in the android development section under latest recoveries
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hednik said:
Flash a d2att recovery. TWRP latest is 2.4.2.0... So what you said seems right. If he got from too it will always flash the latest. Try to to find d2 art recovery. Its linked in the android development section under latest recoveries
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The latest d2att TWRP just flash in recovery.
It's off the recovery thread.
http://forum.xda-developers.com/attachment.php?attachmentid=1700374&d=1359899101
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
The latest d2att TWRP just flash in recovery.
It's off the recovery thread.
http://forum.xda-developers.com/attachment.php?attachmentid=1700374&d=1359899101
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you, that recovery worked.
Hey there xda.
I have an i747m with rogers, and I am on stock touchwiz..
Phone is rooted, reset, wiped, update cwm, and whenever I try to install any custom rom (carbon, liquid, paranoid) I get installation aborted (bad)
Please help
THanks
Have you tried TWRP instead of CWM?
Install this app:
https://play.google.com/store/apps/...251bGwsMSwxLDMsImNvbS5zMHVwLmdvb21hbmFnZXIiXQ..
Then go to settings in the app and select "install openrecovery script".
Then reboot and try to install a ROM again.
What version of cwm is it? And just to double check, you're using i747m rom releases, correct?
Ive never tried anything other than cwm so I will, also I just use roms that are for i747 and that are in the rogers section..
I never see any roms that say i747m they all say i747
Sent from my SGH-I747M using xda app-developers app
Make sure your recovery is the d2att version not the d2can version. It doesn't matter if you flash any i747 ROM on an i747m the only thing is you may have to set your APN manually other than that everything will work
Sent from my SGH-I747 using xda app-developers app
Alright awesome, so do you think the issue is my cwm? Maybe someone couls.give me a link to one that works for them?
Thanks for all the replies so promptly its really appreciated
Also that goo app downloaded a recovery that is d2can
Sent from my SGH-I747M using xda app-developers app
Use this recovery works better than cwm on my i747m.
http://www.teamw.in/project/twrp2/104
Sent from my SGH-I747 using xda app-developers app
Alright thanks guys im gonna try this out when I get home and reply back..
And so all I do is flash this using odin like normal?
Sent from my SGH-I747M using xda app-developers app
Yes. Or you can just use the terminal emulator way which you can do from your phone if you feel comfortable enough doing so.
Sent from my SGH-I747 using xda app-developers app
alright so I used teamwin recovery and I tried to use a rom I am positive works, liquidsmooth. and It said unable to open zip..
Lyners said:
alright so I used teamwin recovery and I tried to use a rom I am positive works, liquidsmooth. and It said unable to open zip..
Click to expand...
Click to collapse
so twrp installed correctly? and once you booted into custom recovery (twrp) you werent able to install zip from sdcard?
Redownload the ROM and try again. Just to be sure, you are not trying to flash it using ROM manager or too manager?
Sent from my SGH-I747 using xda app-developers app
Nope installing straight from twrp and its not working..
Im installing from external sd card, and I've tried carbon rom and liquid neither seems to work.
Lyners said:
Nope installing straight from twrp and its not working..
Im installing from external sd card, and I've tried carbon rom and liquid neither seems to work.
Click to expand...
Click to collapse
what twrp version
2.5.0.0 is what it says
Lyners said:
2.5.0.0 is what it says
Click to expand...
Click to collapse
you could redownload a ROM and try again or flash this in recovery: twrp2.4.4.0
flash it and reboot recovery (under advanced i believe). its obviously a previous version of twrp and may allow you to flash the ROM zip
Lyners said:
Nope installing straight from twrp and its not working..
Im installing from external sd card, and I've tried carbon rom and liquid neither seems to work.
Click to expand...
Click to collapse
Have you tried from you're internal storage? Maybe its the SD card that has an issue.
Sent from my SGH-I747 using xda app-developers app
jbradbury said:
Have you tried from you're internal storage? Maybe its the SD card that has an issue.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
unless he's wiped system.
OP, whats your status
Im gonna try the 2.4 right now..
I'll also try using from onboard storage
Probably corrupted files. Try opening the zip files on you computer with WinRAR... If you get any errors opening it is corrupted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I successfully rooted my S3 (Bell I747M), installed TWRP recovery, booted into the recovery, created a backup (thank god!), wiped using TWRP (factory reset -> wipe dalvik -> wipe cache -> wipe data) and then went into install, selected the CyanogenMod zip and swiped to flash. Failed. Every time. I tried numerous wipes but flashing CM just kept on failing. So I got fed up and restored to my backup.
But I really want CM! One more maybe-important thing is that when I was installing TWRP, it said my device was d2can, even though my device is actually I747M. But I remember when downloading CM I had to download the d2att version (that was listed as the one compatible with my I747M), but TWRP was saying d2can and not giving me the option to choose anything else so I just went with it.
Please try and help me!
Did you download the d2att version of cm?
Sent from my Galaxy S3 on CM10.1 using XDA App
blackdragon12 said:
Did you download the d2att version of cm?
Sent from my Galaxy S3 on CM10.1 using XDA App
Click to expand...
Click to collapse
Yes I did.
Amazious said:
Yes I did.
Click to expand...
Click to collapse
Hmm alright, are you able to flash any other roms?
I had a similar issue and im trying to recall what I did to overcome this..
EDIT: I think I remember. I flashed a different CWM version and for some reason it prevented me from flashing CM10.1.. Do a google search for "CanadaGS3CWM6.0.1.2.tar" and let me know if it works. If you cant find it shoot me a PM and ill look for it.
Thanks for the reply.
I haven't tried flashing any other room but I have successfully flashed a debloating software made by mrRobinson.
Also‚ I'm not using CWM‚ I'm using TWRP. I installed it through the GooManager app found in the Play store.
If I have already installed TWRP then will I still be able to install that CWM file you are suggesting I install?
It is late now and I am going to bed but I'll be back on tomorrow evening to try again so I'll try what you said then.
Sent from my SGH-I747M using xda app-developers app
I think the issue is that I'm trying to flash a d2att ROM on a TWRM that thinks I'm on a d2can device when in reality I'm on an I747M. The d2att is said to work on the I747M on CyanogenMod's website though so I think the issue is flashing the d2att when TWRP thinks I'm on a d2can.
Anyone have a clue as to what to do about that?
Sent from my SGH-I747M using xda app-developers app
Amazious said:
I think the issue is that I'm trying to flash a d2att ROM on a TWRM that thinks I'm on a d2can device when in reality I'm on an I747M. The d2att is said to work on the I747M on CyanogenMod's website though so I think the issue is flashing the d2att when TWRP thinks I'm on a d2can.
Anyone have a clue as to what to do about that?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I am on TELUS in canada and with running that version of CWM, everything is fine here.
Amazious said:
I think the issue is that I'm trying to flash a d2att ROM on a TWRM that thinks I'm on a d2can device when in reality I'm on an I747M. The d2att is said to work on the I747M on CyanogenMod's website though so I think the issue is flashing the d2att when TWRP thinks I'm on a d2can.
Anyone have a clue as to what to do about that?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
You'll need a d2att version of twrp. You can get the odin flammable file off their website.
You'll also need to verify your boot loader is up to date. Many people having the same problem.
Simple search will get you both things.
Sent from my SGH-I747 using xda app-developers app
But will I be able to install the d2att version of TWRP if I have already installed the d2can version?
Sent from my SGH-I747M using xda app-developers app
Amazious said:
But will I be able to install the d2att version of TWRP if I have already installed the d2can version?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Yup just overwrites it.
Sent from my SGH-I747 using xda app-developers app
So I just download the .tar and flash it just like I flashed the root through Odin?
Edit: Also should I get CM10.1 or stick with 10 until a stable release of 10.1?
Sent from my SGH-I747M using xda app-developers app
Amazious said:
So I just download the .tar and flash it just like I flashed the root through Odin?
Edit: Also should I get CM10.1 or stick with 10 until a stable release of 10.1?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Yup just in odin like a root file. It goes in the pda section. Uncheck reboot,. When it finishes unhook the cable pull the battery and than reboot into recovery after. Sometimes the flash doesn't stick after a reboot.
Cm10.1 has a release candidate out right now rc4 it's pretty stable.
You'll need to make sure your bootlader is up to date before you flash it though.
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Yup just in odin like a root file. It goes in the pda section. Uncheck reboot,. When it finishes unhook the cable pull the battery and than reboot into recovery after. Sometimes the flash doesn't stick after a reboot.
Cm10.1 has a release candidate out right now rc4 it's pretty stable.
You'll need to make sure your bootlader is up to date before you flash it though.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
How would I check if my bootloader is up to date?
Also when flashing TWRM do I flash the zip file or extract the recovery.img and flash that?
Amazious said:
How would I check if my bootloader is up to date?
Click to expand...
Click to collapse
Read through this. If it's up to date just flash the newest cm 10 once recovery is changed.
http://forum.xda-developers.com/showthread.php?t=2292957
If it is out of date than go here and follow these steps.
http://forum.xda-developers.com/showthread.php?p=41535366
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Read through this. If it's up to date just flash the newest cm 10 once recovery is changed.
http://forum.xda-developers.com/showthread.php?t=2292957
If it is out of date than go here and follow these steps.
http://forum.xda-developers.com/showthread.php?p=41535366
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
That tells me how to check my bootloader but how do I know if it's the latest one?
Also, when flashing TWRP, do I extract the zip and flash the recovery.img or flash the whole zip?
By the way, thanks a ton for all the help you're giving me!
Amazious said:
That tells me how to check my bootloader but how do I know if it's the latest one?
Also, when flashing TWRP, do I extract the zip and flash the recovery.img or flash the whole zip?
By the way, thanks a ton for all the help you're giving me!
Click to expand...
Click to collapse
The second link has the latest boot loaders sorry I should have mentioned that. It has to match the one listed.
I don't know what you downloaded but the twrp recovery off their site should be the .tar to load in odin. The .img file you'd have to load using adb. Easier to use the odin file. No unzipping just flash with odin.
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
The second link has the latest boot loaders sorry I should have mentioned that. It has to match the one listed.
I don't know what you downloaded but the twrp recovery off their site should be the .tar to load in odin. The .img file you'd have to load using adb. Easier to use the odin file. No unzipping just flash with odin.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Awesome, thanks a ton for your help! Did what you said, bootloader was up to date so I flashed TWRP d2att and successfully flashed CyanogenMod 10.
Thank you!
Amazious said:
Awesome, thanks a ton for your help! Did what you said, bootloader was up to date so I flashed TWRP d2att and successfully flashed CyanogenMod 10.
Thank you!
Click to expand...
Click to collapse
NP glad it worked.
KorGuy123 said:
NP glad it worked.
Click to expand...
Click to collapse
Btw, CM10.1 RC5 is pretty stable with good battery life.
Could you please tell me what method was used? I have a Bell GS3 as well. I followed this tutorial http://forum.xda-developers.com/showthread.php?t=1739426 to get root and recovery today. I have now tried flashing CM10.1 using the latest CWM and TWRP d2att recoveries and neither work. I'm giving up for today but will try again after work tomorrow. I've read stuff about changing the build.prop files to trick the phone but I don't know where to start.
Thanks,
Spike
I'm not sure if anyone can help me with this but I cannot seem to get my phone to d2att. I'm rooted, I've installed twrp through goo manager but I've also flashed the d2att recovery through Odin. I've tried editing the build.prop before flashing but, after a reboot the changes always revert back to d2can. I'm not sure what else I can do. Can I just leave it like this and flash d2att roms through twrp or does anyone have any suggestions?
Sent from my SGH-I747M using xda app-developers app
I'm not sure if anyone can help me with this but I cannot seem to get my phone to d2att. I'm rooted, I've installed twrp through goo manager but I've also flashed the d2att recovery through Odin. I've tried editing the build.prop before flashing but, after a reboot the changes always revert back to d2can. I'm not sure what else I can do. Can I just leave it like this and flash d2att roms through twrp or does anyone have any suggestions?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
There is a twrp thread that has flashable recoveries for the d2att. You can try that.
If you flash a recovery through Odin I always uncheck "auto reboot" and manually reboot right into recovery to make sure it sticks.
http://forum.xda-developers.com/showthread.php?p=45677246
Sent from my SGH-I747 using xda app-developers app
That's weird, I've browsed that thread thoroughly. I haven't tried that flashable zip but I'll give it a go. I've tried flashing the recovery through Odin and mobile Odin. So frustrating because this should be simple.
Sent from my SGH-I747M using xda app-developers app
jordan.harris01 said:
That's weird, I've browsed that thread thoroughly. I haven't tried that flashable zip but I'll give it a go. I've tried flashing the recovery through Odin and mobile Odin. So frustrating because this should be simple.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Chainfire said it best. "Longer than 30 seconds and you're doing it wrong"
Good luck.
Sent from my SGH-I747 using xda app-developers app
I broke my t999 then t moBile sent me a T999L what's the difference? All I was able to do was root it. I can't install a custom recovery or any rom, when i do it fails any suggestions?
Sent from my SGH-T999L using xda app-developers app
SamsungAllDay said:
I broke my t999 then t moBile sent me a T999L what's the difference? All I was able to do was root it. I can't install a custom recovery or any rom, when i do it fails any suggestions?
Click to expand...
Click to collapse
The T999L is the Superior Cousin T999 never was. It has an LTE antenna that the T999 is missing. Practically all the Custom Roms will work fine from one to the other.
If you want to flash custom Recovery then use Goo Manager and hit Install Custom Recovery Script.
Yea already tried goo manager but it said no recovery scripts were found for your device
Sent from my SGH-T999L using xda app-developers app
SamsungAllDay said:
Yea already tried goo manager but it said no recovery scripts were found for your device
Click to expand...
Click to collapse
Don't worry the TWRP for SGH-T999 will work just fine for your device.Try this Link and get the TWRP version 2.5.0.0
Okay thanks will do.
Sent from my SGH-T999L using xda app-developers app
Same thing happend it failed like everything else
Sent from my SGH-T999L using xda app-developers app
SamsungAllDay said:
Same thing happend it failed like everything else
Click to expand...
Click to collapse
You need to use ODIN to flash that Version. There's plenty of Tutorials on How to use ODIN.
I know how to use it, I tried it last night but everything fails.
Sent from my SGH-T999L using xda app-developers app
SamsungAllDay said:
I know how to use it, I tried it last night but everything fails.
Click to expand...
Click to collapse
Could be your Bootloader is locked.
Are you absolutely sure you are successfully Rooted ? Please use Root Checker App if in doubt.
When you tried to flash the Recovery via ODIN, what was the error ? Can you post a screenshot ?
With due respect "Everything Fails" doesn't really tell me squat.
I'll do that when i get back home.
Sent from my SGH-T999L using xda app-developers app
i tried it via odin again and it worked i have no idea what was wrong with it, thanks for finding those TWRP files for me.
Do a quick search before going any further. I have a T999L thread that answers most any question you may have.
Sent from my SGH-T999N using Tapatalk