Related
Hello,
I was trying to flash a new Rom onto my phone (Superfly) and installed the .zip file from clockwork, however, when I try to boot the phone, it sticks at the Mytouch slide screen.
I cant load into the card nor the phone.
Is there any way to reverse this?
Thanks in advance!
Hopefully you made a backup. You should still be able to boot into recovery and restore your backup or even flash a new rom.
sandpaperback said:
Hopefully you made a backup. You should still be able to boot into recovery and restore your backup or even flash a new rom.
Click to expand...
Click to collapse
The problem the OP and myself are having is that we cant load Clockwork recovery, and I think its cause when we flashed the new rom, it did away with USB debugging mode, and now we cant get back into the OS to select it again. I too am stuck in this loop, and I might just have to bite the bullet and bring it in to tmo and tell em it just stopped working for no reason...
dion20 said:
The problem the OP and myself are having is that we cant load Clockwork recovery, and I think its cause when we flashed the new rom, it did away with USB debugging mode, and now we cant get back into the OS to select it again. I too am stuck in this loop, and I might just have to bite the bullet and bring it in to tmo and tell em it just stopped working for no reason...
Click to expand...
Click to collapse
The USB debugging option means nothing while booted in to recovery. If you haven't flashed the engineering rom before you will need to redo the loop/ota.zip/update.zip spoof to get back in to clockwork.
I did do a nandroid backup, but the phone magically can not find it now. And It took forever to get to work, but I was finally able to get back into clockwork and tried to install another a different rom (Kanged CM6 ROM) but ended with the same results of sticking on the mytouch slide startup screen. Frustrating, because it probably took about 3 hours to get back into clockwork!
Any other suggestions???
wipe everything on the phone, find the thread that walks you through that
cursexcore said:
I did do a nandroid backup, but the phone magically can not find it now. And It took forever to get to work, but I was finally able to get back into clockwork and tried to install another a different rom (Kanged CM6 ROM) but ended with the same results of sticking on the mytouch slide startup screen. Frustrating, because it probably took about 3 hours to get back into clockwork!
Any other suggestions???
Click to expand...
Click to collapse
As was noted previously, if you haven't flashed the ESPRIMG rom, you're basically looking at re-rooting your phone every time you want to install a different rom. This means going through the whole process again and again and again.
falken98 said:
The USB debugging option means nothing while booted in to recovery. If you haven't flashed the engineering rom before you will need to redo the loop/ota.zip/update.zip spoof to get back in to clockwork.
Click to expand...
Click to collapse
thats weird, cause before I could get into clockwork after 2 tries max, not I tried repeatedly for 10 mins and it didnt work, so I should just keep tryin to get into clock work then?
Yes, keep trying. And when you do, please flash the engineering rom and keep the proper update.zip on your card! It will save you a lot of trouble in the long run.
sandpaperback said:
Yes, keep trying. And when you do, please flash the engineering rom and keep the proper update.zip on your card! It will save you a lot of trouble in the long run.
Click to expand...
Click to collapse
will do, theres alot of assumptions around here tho, and newbs to android are kinda expected to know things without them being stated in the threads..
Now I know theres something that makes it so I dont have to go thru the pain of rooting to get into clockwork I'm def gna use it..
what method should I use? Ive been doing the following and no luck so far
1 - cd to android sdk tools folder
2 - vol down + power for recovery
3 - highlight recovery
4 - run loop in cmd
5 - plug usb into phone
6 - plug usb into pc, and before it changes to HBOOT from USB i hit power to select recovery
7 - adb devices sees it as an offline device for a few cycles, then it disappears.
after step 7 I've tried running update.zip
unplugging and plugging back in
ctrl+c to stop the script when its offline
unplug when its noticed as an offline device
whats the best way to get into it now?
======
EDIT - finally got it into recovery, i loaded up htc's recover with it plugged it to the pc so it loaded up HBOOT from USB
normally your are not bricked if:
1. you can boot into recovery
2. you can not boot into recovery yet you can boot into bootloader [HOLD (power + volume down) to boot]
Don't worry I got a black/blank screen of death the other day for flashing the wrong boot.img fortunately I was able to boot into bootloader and start from scratch using the ESPRIMG.zip
dion20 said:
will do, theres alot of assumptions around here tho, and newbs to android are kinda expected to know things without them being stated in the threads..
Click to expand...
Click to collapse
I agree to an extent, but if you take the time to read through things thoroughly (as in every post in the How To Root or Engineering Build or even Rom Bible thread), you'll be okay. This is my first Android device as well. I put off rooting for a solid couple of weeks while I read through everything I could. I was completely paranoid about bricking my phone. Eventually, I went for it. Even then I had a couple hiccups along the way (including have to re-root two more times), but all the information is here.
So an update:
I went to a Tmobile retail store to see if I could do a direct swap and am having a new phone sent out to me. I will definately take all the replies into consideration when starting the root process on my new one! My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
cursexcore said:
[blah blah blah....] My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
Click to expand...
Click to collapse
My question: did u search here?
http://forum.xda-developers.com/forumdisplay.php?f=660
And found items about the champion build and this little file named ESPRIMG.zip?
U can also check out the ROM BIBLE stickie post.
u can try this:
http://forum.xda-developers.com/showthread.php?t=713507
or you can try this:
http://forum.xda-developers.com/showthread.php?t=713507
now if you really searched you would of found your own question:
http://forum.xda-developers.com/showthread.php?t=744709&highlight=unroot
cursexcore said:
So an update:
I went to a Tmobile retail store to see if I could do a direct swap and am having a new phone sent out to me. I will definately take all the replies into consideration when starting the root process on my new one! My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
Click to expand...
Click to collapse
I had the same problem you did, and fixed my phone, so its possible. refer to my post on the first page and then refer to this post and use the mirror that Wes himself posted.
http://forum.xda-developers.com/showpost.php?p=7001053&postcount=7
Hey guys, I tried to perma root my wife's G2 last night using Visionary+ r14 but when it tried to reboot it doesn't get past the green and white "HTC" screen, so now I have a couple of questions.
I bought this phone from someone off of Craigslist and it was working great until I tried to root it so it is technically out of warranty do you think I can get it replaced since everything is still stock?
Also I tried to apply the HTC OTA update to fix it and I still have the problem, is there anything I can do to repair this phone? Thanks in advance guys and mahalo!
Okay pull your battery out and put it back in..after dat press power button and volume down button until you get to the recovery screen and do a factory reset..
Sent from my HTC Vision using XDA App
Thanks for the reply jboiii15. I did a factory reset before I flashed the OTA update and I have factory reset several times but still no go. I appreciate you taking the time to help me out.
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
aznsnake666 said:
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
Click to expand...
Click to collapse
I haven't tried it because I can't get ADB to work with the phone the way it is, Fastboot works but ADB just shows nothing there while I'm in recovery or the boot screen. Thank you also for the reply. My wife is pissed lol.
Try to extract the ROM from the official RUU and rename it to PC10IMG.zip. Put this on the root of your SD card and boot into bootloader and leave it to work. This should solve your problem Fingers Crossed
JD
do you have s-off??
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
itsmekeoni said:
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
Click to expand...
Click to collapse
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Oh man this is just getting worse lol. I had the phone sitting here plugged into my laptop while the phone was in the Hboot screen where you can select Fastboot, Recovery and so on. All of a sudden my here Windows give off the noise as if something was connected or disconnected from my computer and I see the screen shut off on the G2 with a red light blinking. Now the phone doesn't power on and the red light blinks while the phone is plugged into the computer but doesn't power on.
As I was typing this the red light came on solid as if it is charging now, maybe it doesn't charge while in that screen and the battery just died I dunno, strange.
JupiterDroid said:
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Click to expand...
Click to collapse
Well I called T-Mobile and they are sending out a new phone, I'm unsure if I should still mess with it or not. I did flash the TMOUSA OTA update and that didn't help, I didn't unpack it to see if it contained a new Kernel but I'm sure it had a new system.img, still think it is one of those that is messed up?
I'm having a hard time finding the things to get the PC10IMG.zip going, work is calling me in different directions and my A.D.D is kicking in lol.
try this http://forum.xda-developers.com/showthread.php?t=855764 i had the same problem like you, steviewevie told me to do it, if you have problem to connect your g2 with sdk download pda net, it works for me and now i have my g2 back with the new root... just do what it said on that link believe me works...
P.D. I am a androidnoober always have a iphone and this was my first time using sdk adb or whatever name is and I did it
Thanks AndroidNoober, I've seen that link in my search for an answer to my problem. One of the issues that is making this harder is that after the phone "bricked" it lost ADB connectivity. I've tried it on two computers that have a properly working ADB (I test it with my N1 and 3G Slide) and it used to work with the G2 but now I can't get it to see the phone, I've heard Recovery has ADB blocked.
semi bricked attempting permaroot
i attempted permaroot and semi bricked my phone. will not boot past htc screen. i can't get adb to work. i am trying to get pdanet installed but it keeps getting stuck on installing on phone. can it install while phone is in recovery mode? i have had no sucess trying to figure this out on my own and phone is not covered with a warranty
i have gotten the phone to read an update.zip file.
it is reading the pc10img.zip as well.
now i just have to get past the htc screen.
i do have s-on as i had just started the process.
any help would be appreciated
So I got root. Ran Clockwork Mod. Backed up to the SD card. Rebooted.
Now I'm stuck between the Clockwork recovery screen (if I power/camera/volume down) and another apparent recovery screen (regular power on) that says in blue "Android system recovery (2e)" and at the bottom, in yellow, "# Manual Mode #" . . .
I'm not able to get out of these two screens. I've pulled the battery and the card, chosen the "reboot" option, chosen the "restore" option (CWM), etc.
Can anyone help me get my phone working again?
Thanks in advance!
I would odin back to stock if you can get into dl mode
Can you reflash your ROM in the CWM? If not then Odin or Heimdall would be easiest then restore your backup.
Thanks guys. I used Odin - lost all my data (which I was of course trying to avoid), but got my phone back.
So, I've learned 2 valuable things here:
1. I was able to get root (sort of).
2. I was able to recover my phone (but not my data).
Does anyone have an idea as to how I got stuck in that loop in the first place - and, more to the point, how I can get past it so I can actually use my phone after I get root?
Although I'm very busy (work full-time, school full-time), I'm willing to make a reasonable donation to someone who's able to spend a little time to get me off and running.
Use odin to install something thats pre rooted like http://forum.xda-developers.com/showthread.php?t=1221614
Your situation is kind of unique. But as mentioned above Odining a prerooted ROM will help. Didn't you say you backed up before all this happened? Why did you lose your data? Root and restore.
Sent from my SPH-D700 using XDA App
Thanks, I did get most of my stuff back. I'm still kind of a n00b at this, so it wasn't apparent until I started looking for it. I thought it was gone because my apps were, and I hadn't yet reupped gmail, so my contacts list wasn't apparent. In the end, other than having to remember all the apps I wanted to get back, the only real disappointment was that I lost my place in the game Big Time Gangsta, so I had to start over. I was up to level 53!
In reality, though, the only thing that was super important to me, my contacts, came back. So I'm a pretty happy camper. I was also able to Odin up that rooted Gingerbread and, to top it off, I now have a free tether hooked up and working - my rationale for rooting the phone in the first place.
I do appreciate everyone's help. Sure I'll be back with more questions!
Marco
Glad we could help
Not yet rooted - stuck in manual mode
I was in the beginning stages of rooting, couldn't get anything to happen when I was in Downloading mode. I then booted with Vol Down-Camera-Power, and I can't get OUT of it. I have no OK button, and the Camera button isn't working to reboot/select. Please help!!!
emersonkelli said:
I was in the beginning stages of rooting, couldn't get anything to happen when I was in Downloading mode. I then booted with Vol Down-Camera-Power, and I can't get OUT of it. I have no OK button, and the Camera button isn't working to reboot/select. Please help!!!
Click to expand...
Click to collapse
HOME key
Sent from my SPH-D700 using Tapatalk 2
ON 11/19/13 i was having problems with my Sprint Samsung Galaxy S3 the wifi wouldnt work, couldnt get service on it and a list of other things. I was stock rooted with TWRP recovery before and flashed the stock MD4 with flashcount reset to take it back to Sprint so they can try to fix this which they did. After it was fixed I recieved it back and right after rooted it using the Samsung S3 Tool Kit. It was a success, but now my wifi, and bluetooth wouldnt work. So i was convinced to just not do anything and keep it stock and just wait till my next upgrade which is very soon. I did a factory reset and it booted me into the stock recovery and then i proceeded with the process. So as i was doing a factory reset it kept bring a TON of red error messages. NOTHING would mount, NOTHING would wipe, NOTHING happend. But in the end it said it said that it was a success. I was very confused to what was happening ive never seen anything like this. So i was very worried hoping it would boot back up like nothing happend, and thats exactly what happend. Nothing. All it did was boot up and stayed on the Samsung logo screen. The only thing i can do was boot into download mode and recovery. I then put my phone into DL MODE and downloaded the stock sprint rom from AdamLange and flashed it using Odin. That failed obviously. So I re-installed the CORRECT drivers, tried different USB cables and USB ports, and flashed again. That still didnt work. I then used the Samsung toolkit to unroot/unbrick my phone, that didnt work either. I read every forum related to this problem and beleive me i did, i stayed up all day and night trying to figure something out, trying to get information and re-did the process at least 2 times. I am on my last resort id never thought it ended up to me asking a question on here, i dont want to sound like an idiot but i am out of options...
Sorry i made this too long but id thought id put every single thing that i did to my phone that maybe i did wrong. Id appreciate it if anyone had any tips on what to do here, any feedback and any suggestions that can help me is appreciated, thank you.
See if THIS method works for you. Then you can start the process over.
prboy1969 said:
See if THIS method works for you. Then you can start the process over.
Click to expand...
Click to collapse
Yes i tried this. That's what I use whenever I take it to Sprint for fixes. And also if i were to try it again it wouldn't mount my sd card or the internal memory, maybe flash it through Odin even if its a .zip file? My flash count is at 3, will sprint still be able to replace the devise or at least fix it? Thank you for the suggestion though.
Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?