Related
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
I remember a thread like this being made a while ago...if you're on a computer, just search and you should find it. I can't post a link, but I think the guy in that thread replaced it succesfully.
There was also alotta chatter about insurance covering it
Sent from my SPH-D700 using XDA App
Here's a tear down of the Epic 4G:
http://www.chipworks.com/en/technical-competitive-analysis/resources/recent-teardowns/2010/09/teardown-of-the-samsung-epic-4g-smart-phone/
Try asking a repair technician. The truth is, body repairs can be quite pricey - to the point where you might as well be getting a new phone in many cases.
I watched someone else take mine apart. There are an awful lot of little screws, but you can definitely seperate the case, the screen, and the actual guts in about 10 or 15 minutes.
DiGi760 said:
I watched someone else take mine apart. There are an awful lot of little screws, but you can definitely seperate the case, the screen, and the actual guts in about 10 or 15 minutes.
Click to expand...
Click to collapse
The question then is can you get it back together ;-)
Sent from my ext4 Epic 4G running Bonsai4all 1.1.3!
sauron0101 said:
Here's a tear down of the Epic 4G:
http://www.chipworks.com/en/technic.../teardown-of-the-samsung-epic-4g-smart-phone/
Try asking a repair technician. The truth is, body repairs can be quite pricey - to the point where you might as well be getting a new phone in many cases.
Click to expand...
Click to collapse
I had TEP with my BB curve and I smashed it [was REALLLLLLY angry at my gf...she wasn't worth the BB :'( ] and I took it to a corporate store, and he fixed the screen in front of my face and I walked right out lol but that was a couple years ago
Sent from my SPH-D700 using XDA App
The phone still works, I just wouldn't want to look at pictures or watch videos on it since the color is all messed up. It's been about 2 weeks since the accident and it's still going! I just want to study this just for reference just in case it does go out. The replacement cost $60 on ebay, so I'd definitely do that, especially when I don't have insurance with Sprint (I think it still costs more than DIY) and I don't think Samsung fixes water damage through its warranty.
Oh well.
Thanks for the link! I'll check it out!
being a technician at an indirect sprint store, its a pain in the ass to separate the LED screen and the glass itself. the very best way to do it is either go to a 3rd party sprint store that has a full service(repair) center and either have them do an exchange if the tech is a nice guy (considering its water damage) or replace the part (which would be free as long as you have TEP). PM me with more questions if you have them
kzn said:
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
Click to expand...
Click to collapse
Yeah, I've done it at least 20-30 times now. It's EXTREMELY difficult to get the lcd out and you'll more than likely end up breaking your phone.
br//0k3/n said:
Yeah, I've done it at least 20-30 times now. It's EXTREMELY difficult to get the lcd out and you'll more than likely end up breaking your phone.
Click to expand...
Click to collapse
Yea, you're definitely right about the LED itself. It's close to paper thin and made of a glass type material. it will break if you try to get it out. it's glued pretty good.
flawlessbmxr said:
Yea, you're definitely right about the LED itself. It's close to paper thin and made of a glass type material. it will break if you try to get it out. it's glued pretty good.
Click to expand...
Click to collapse
I took mine apart, lots of screws. Honestly the hardest part was removing the back cover that goes over the motherboard. I used a very small flathead to pry up underneath where the little notches are on the side. There's a lot of clip points and 2 of them at the battery are very hard to get off. Once that's off, the rest is cake. Separating the screen was a non-issue, as mine was already broken/cracked.
just to chim,e in on this ancient thread. i used a guitar pick instead of a flat head. i thought a metal screwdriver would scuff and mar up the plastic cover over the board.
Another protip: the notches on the second to last plastic cover serve a purpose -getting that back half to snap onto the phone is a huge pain in the ass, - i put a flathead into the slits and pushed down and snap snap snap snap motherboard cover was back in and my battery case didn't bulge.
kzn said:
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
Click to expand...
Click to collapse
I've replaced my LED screen before by myself, took a few hours. This video helped me.
http://www.youtube.com/watch?v=IeO89VGAPuU
zvonkorp said:
I took mine apart, lots of screws. Honestly the hardest part was removing the back cover that goes over the motherboard. I used a very small flathead to pry up underneath where the little notches are on the side. There's a lot of clip points and 2 of them at the battery are very hard to get off. Once that's off, the rest is cake. Separating the screen was a non-issue, as mine was already broken/cracked.
Click to expand...
Click to collapse
Is there a water sensor inside the phone, I've always wondered if the battery was the only place
Sent from my SPH-D700 using Tapatalk
So....
I've NEVER dropped any of my phones, ever, as long as I've had cell phones. Well, dropped and it actually hit the ground. I've dropped this damn phone like 4x already, I think partially to do with it being so smooth and "slippery" to the hand.
Anyway, I dropped it once from about 6 feet in the air directly on the screen and NOTHING happened at all (except some very very minor dings to the frame itself) and light scratches to the screen protector. Today, I was trying to pull it out of my pocket at work when it slipped and fell (from about 2 feet from the ground) landing on the right side of the phone. My right hand (phone sits in right pocket) is in a brace due to a stress fracture I received at work, so when it slipped I couldn't catch it. I watched it fall, which was the worst moment ever lol. Since my work pants have slanted pockets, it fell behind me so I couldn't even attempt to put my foot under it to stop the impact.
Anyway, as I picked it up I honestly didn't expect to see anything. I pick it up, turn it over and it looks like there is a piece of hair right along the frame in the shape of a sideways "U". I went to brush it off and realized it had cracked!
It's a very small and almost non noticeable crack JUST before the digitalizer starts but I know it's there so it bothers me. I showed a few guys at work and nobody noticed it until I pointed it out.
Anyway, think its worth looking into getting fixed or just stick it out because it's so minor?
*sorry picture is so crappy, wife has a Lumia 710...camera sucks.
uoY_redruM said:
So....
I've NEVER dropped any of my phones, ever, as long as I've had cell phones. Well, dropped and it actually hit the ground. I've dropped this damn phone like 4x already, I think partially to do with it being so smooth and "slippery" to the hand.
Anyway, I dropped it once from about 6 feet in the air directly on the screen and NOTHING happened at all (except some very very minor dings to the frame itself) and light scratches to the screen protector. Today, I was trying to pull it out of my pocket at work when it slipped and fell (from about 2 feet from the ground) landing on the right side of the phone. My right hand (phone sits in right pocket) is in a brace due to a stress fracture I received at work, so when it slipped I couldn't catch it. I watched it fall, which was the worst moment ever lol. Since my work pants have slanted pockets, it fell behind me so I couldn't even attempt to put my foot under it to stop the impact.
Anyway, as I picked it up I honestly didn't expect to see anything. I pick it up, turn it over and it looks like there is a piece of hair right along the frame in the shape of a sideways "U". I went to brush it off and realized it had cracked! btw i use this case http://www.goballisticcase.com/products/samsung-galaxy-s-3-ballistic-sg-maxx-series-case makes my phone a bit thick but ive dropped it about 15 feet when i was on the roof the other day fixing the window. i pulled it out to check the weather cause it looked like it was going to rain well not rain more like hail. so i checked and instead of putting it in my pocket i missed and i just watched it slide off the shingles. and drop im like nooo its gonna be dead when i go pick it up. not even a scratch
It's a very small and almost non noticeable crack JUST before the digitalizer starts but I know it's there so it bothers me. I showed a few guys at work and nobody noticed it until I pointed it out.
Anyway, think its worth looking into getting fixed or just stick it out because it's so minor?
*sorry picture is so crappy, wife has a Lumia 710...camera sucks.
Click to expand...
Click to collapse
id personally get it fixed or fix it myself since only the screen and not the lcd. imagine if you ever drop it again even inches that "u" could probably be the cause of it expanding and cracking all over. well thats my opinion
Can't attach from the pc for some reason.
Sent from my SGH-T999 using xda premium
uoY_redruM said:
Can't attach from the pc for some reason.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
the pic was attached to the first post
Dude, that sucks! Never wanted to see that happen to you man.
I have to agree though, if its doable for you, get it fixed. Once compromised like that its just gonna get worse most likely. Even just setting it down or bumping into something while its in your pocket could make it much worse.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Dude, that sucks! Never wanted to see that happen to you man.
I have to agree though, if its doable for you, get it fixed. Once compromised like that its just gonna get worse most likely. Even just setting it down or bumping into something while its in your pocket could make it much worse.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I would say slap it into a bumper that will cover up most of it. But, you already said you know it's there, so that won't work. So, I guess I'd advise having it fixed.
Sorry to hear that.
Sent from my SGH-T999 using xda premium
---------- Post added at 11:53 PM ---------- Previous post was at 11:51 PM ----------
the ghost armor kit would cover that if applied right. I'll take a picture of mine if I can find a camera
Sent from my SGH-T999 using xda premium
uoY_redruM said:
So....
I've NEVER dropped any of my phones, ever, as long as I've had cell phones. Well, dropped and it actually hit the ground. I've dropped this damn phone like 4x already, I think partially to do with it being so smooth and "slippery" to the hand.
Anyway, I dropped it once from about 6 feet in the air directly on the screen and NOTHING happened at all (except some very very minor dings to the frame itself) and light scratches to the screen protector. Today, I was trying to pull it out of my pocket at work when it slipped and fell (from about 2 feet from the ground) landing on the right side of the phone. My right hand (phone sits in right pocket) is in a brace due to a stress fracture I received at work, so when it slipped I couldn't catch it. I watched it fall, which was the worst moment ever lol. Since my work pants have slanted pockets, it fell behind me so I couldn't even attempt to put my foot under it to stop the impact.
Anyway, as I picked it up I honestly didn't expect to see anything. I pick it up, turn it over and it looks like there is a piece of hair right along the frame in the shape of a sideways "U". I went to brush it off and realized it had cracked!
It's a very small and almost non noticeable crack JUST before the digitalizer starts but I know it's there so it bothers me. I showed a few guys at work and nobody noticed it until I pointed it out.
Anyway, think its worth looking into getting fixed or just stick it out because it's so minor?
*sorry picture is so crappy, wife has a Lumia 710...camera sucks.
Click to expand...
Click to collapse
Why mine is in an otter box ^-^
But I personally would just throw a case on it to prevent further cracking. Doesn't look too horrible from your picture. But as others already mentioned, it will crack even more easily since it's already started.
That's a known issue with the s 3. The screen is lifted a hair from the bezel. So the bezel bends into the glass at the edge (weakest point in glass) where other devices usually bend over the glass.
But good luck to whatever you decide!
Sent from my SGH-T989 using Tapatalk 2
Yeah it's not bad at all. And remember you can replace just the glass too. But i would wait for it to be more messed up before doing that
Sent from my SGH-T999 using xda app-developers app
Slap a good case on it and it should be fine for now at least.
Let's just hope that you don't drop it again to further increase the cracking.
An OtterBox Defender Case might be a good idea.
Very bulky, kind of pricey, but it will offer you the protection that you need.
Personally id be worried about further damage as is. Obviously the glass is weakened already, and while it may seem ok to wait until its worse before fixing, i have to disagree as im pretty sure this also makes the digitizer more vulnerable to damage as well.
How often have you seen or heard about devices that had a cracked screen causing the touch capabilities to break as well? One more drop or bump into the corner of a table where that crack is and you may not get anymore response at all.
I just think it potentially could turn into a much more expensive repair if not taken care of soon. Just not sure id personally want to risk it.
Its just my opinion is all.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Personally id be worried about further damage as is. Obviously the glass is weakened already, and while it may seem ok to wait until its worse before fixing, i have to disagree as im pretty sure this also makes the digitizer more vulnerable to damage as well.
How often have you seen or heard about devices that had a cracked screen causing the touch capabilities to break as well? One more drop or bump into the corner of a table where that crack is and you may not get anymore response at all.
I just think it potentially could turn into a much more expensive repair if not taken care of soon. Just not sure id personally want to risk it.
Its just my opinion is all.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
red you could just take it to tmo? or call Samsung it has to be under warranty but hey they'll do it and no screws up guaranteed. ad it will cost more than a do it your self. i saw somewhere that Verizon did for 100 with insurance, i assume tmo would close to that
Radio Shack has a service to replace your screen for $100. You would be without your phone for a couple of days, however.
I highly recommend the Otterbox Defender, and put all of my phones in one.
In March, while doing some climbing, I fell about 30 ft then tumbled down the side of a mountain. I had a Droid X in my pocket (in it's Defender), and the only damage to the phone was to the camera lens. Everything else about the phone was groovy. I was not in such great shape, as this was in the Arizona desert mountains, so there was no cushy landing whatsoever.
Defender FTW!
lokichim said:
red you could just take it to tmo? or call Samsung it has to be under warranty but hey they'll do it and no screws up guaranteed. ad it will cost more than a do it your self. i saw somewhere that Verizon did for 100 with insurance, i assume tmo would close to that
Click to expand...
Click to collapse
Sorry, i guess i just assumed we were talking about going by one of the diy guides i saw here not long ago. Pretty sure they had instructions for replacing only the glass, but anyway, if you have the full protection plan then it doesnt matter how bad its damaged. I believe the price about a month ago was $130.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Sorry, i guess i just assumed we were talking about going by one of the diy guides i saw here not long ago. Pretty sure they had instructions for replacing only the glass, but anyway, if you have the full protection plan then it doesnt matter how bad its damaged. I believe the price about a month ago was $130.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
we were but then i thought what if red messed up something by accident like we all might, wouldn't that void his warranty? if it didnt then im all in for diy, thats the only reason i said the tmo thing for safety measure. also red looked it up on ebay blue one with tools was 28 dollars and from usa.
Ok, i gotcha. I could be wrong but if you have the full protection plan i was under the impression that you could pretty much do anything and get a replacement. So if im right you can attempt the fix diy style and if unsuccessful then get it replaced. I would double check me on that though!
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Ok, i gotcha. I could be wrong but if you have the full protection plan i was under the impression that you could pretty much do anything and get a replacement. So if im right you can attempt the fix diy style and if unsuccessful then get it replaced. I would double check me on that though!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
well i checked it here http://www.t-mobile.com/shop/addons...setProtection&tp=Svc_Sub_EqpmntProtnInsurance. and i assume it would fall under the damage one its pretty vague which is good for red. so your probably right doc
Yeah, I was considering the DIY route (its like $25 on eBay but you have to break your screen off basically which scares the sh*t out of me).
I do have the full insurance. I may have to go to T-Mobile just to see how much it would cost. I don't have the extra money, just got my car out of the shop. If anything, if the insurance covers it and isn't very much, I could just tough it out until it gets worse (if it does) and THEN take it in to the store for work.
uoY_redruM said:
Yeah, I was considering the DIY route (its like $25 on eBay but you have to break your screen off basically which scares the sh*t out of me).
I do have the full insurance. I may have to go to T-Mobile just to see how much it would cost. I don't have the extra money, just got my car out of the shop. If anything, if the insurance covers it and isn't very much, I could just tough it out until it gets worse (if it does) and THEN take it in to the store for work.
Click to expand...
Click to collapse
Hey what's up red.. so welcome to the "club"... I dropped mine two weeks ago and cracked the glass pretty good.. not too too bad but its has cracks that I can see n feel.. so n e way I got a guy that I trust on the g2x forums that I was thinking of sending mine to him.. would u like me to holler at him for you?
Sent from my GT-N700 using xda premium
Still lucky, mine cracked more severe while inside my pocket because I bumped into a desk :/
Sent from my SGH-T999 using xda app-developers app
So a few days ago I began to notice that the back of my phone is now creaking, I first heard it when i went to pick my phone up the other morning and it sounded like an old hardwood floor creaking sound, it's progressively gotten worse to where now when i hold my phone during a call if i shift my hand at all the person on the other line can hear it. I was wondering if anyone else had this problem. The creaking seems to be isolated to (if you're staring at the back of the phone) the left half of the phone just below the power button and stops creaking above the phone model number beneath the glass.
parham.derick said:
So a few days ago I began to notice that the back of my phone is now creaking, I first heard it when i went to pick my phone up the other morning and it sounded like an old hardwood floor creaking sound, it's progressively gotten worse to where now when i hold my phone during a call if i shift my hand at all the person on the other line can hear it. I was wondering if anyone else had this problem. The creaking seems to be isolated to (if you're staring at the back of the phone) the left half of the phone just below the power button and stops creaking above the phone model number beneath the glass.
Click to expand...
Click to collapse
Mine is as solid as day 1
Same problem here.
Sent from my LG-LS970 using xda app-developers app
I've noticed this too but after putting my diztronic case over it, the creaking stopped.
My phone rattles when a tap my fingers next to the lens or put the phone down. No creakng yet.
Sent from my Nexus 7 using xda app-developers app
Ive noticed mine on the camera. Whenever i try to tap the back of the phone, it seems like its not perfectly fit or something.
Sent from my LG-LS970
They have a similar thread on the international optimus g page with the same complaint. I wonder if the Nexus owners do to.
Edit: the Nexus has the same issue. Just Google nexus 4 and rattle. Seems pretty wide spread.
Sent from my LG-LS970 using xda premium
kc_exactly said:
They have a similar thread on the international optimus g page with the same complaint. I wonder if the Nexus owners do to.
Edit: the Nexus has the same issue. Just Google nexus 4 and rattle. Seems pretty wide spread.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
So this makes me curious as to what other defects its going to have, but I'm on to a different issue, phone dropped about 2" and the digitizer broke, so when my new screen comes in i will do a walk through tutorial on how to replace it... starting to wish i had gone with the GS3...
Mine is also doing that. Just started to notice it today. Kinda makes my opinion of the build quality a little less. But still love the phone. Minus the messaging bug. LOL.
Sent from my LG-LS970 using xda premium
If I use my shoulder to hold the phone to my ear I get a creaking sound too. That's the only time I've heard it though. I imagine it has to do with the glass back.
Here, too. It's the camera side, right below it, that creaks. Fortunately, it's only noticeable when I deliberately squeeze it.
Sent from my LG-LS970 using xda app-developers app
solid here....this msg bug you guys are talking about, is it when your typing the sceen jumps and your back at the start of the msg?
Hey, so I just noticed that if I flip the phone over and orient it so the camera is on top, then it will creak when I push on the left side. You can also see the casing move in slightly. It's almost as if it's broken somewhere but you can't see any crack.
I thought the people at Best Buy had said the back was glass but it's looking more like cheap plastic at this point. Is it different on AT&T maybe?
parham.derick said:
So this makes me curious as to what other defects its going to have, but I'm on to a different issue, phone dropped about 2" and the digitizer broke, so when my new screen comes in i will do a walk through tutorial on how to replace it... starting to wish i had gone with the GS3...
Click to expand...
Click to collapse
I dropped mine from chest height and nothing happened to it. That really sucks for you. How much was the replacement screen?
cthedogg said:
I dropped mine from chest height and nothing happened to it. That really sucks for you. How much was the replacement screen?
Click to expand...
Click to collapse
The replacement screen was $130 went with 2 day shipping (Digitizer/LCD Assembly). Just the digitizer was only $60 but it's a good thing I went with the whole assembly because when i was trying to pull the glass out of the housing some of the shards came off by themselves, and revealed that LG "fusing" the glass to the lcd is literally glue covering the entire LCD making it damn near impossible to just replace the digitizer and make it look nice.
Also a few warnings to those disassembling their phones:
1) The battery isnt solid, more like cased in an extreemly soft metal so it will dent if not carefully removed (it's glued into the housing)
2) The chrome edge dent's very easily, have a small ding where i got impatient, TAKE YOUR TIME!
3) When removing the back cover don't cross over the volume rocker, power button, or USB port with the spudger. for the top of the back removal gently push the back cover forward dont try to shove your spudger in their, it wont work lol.
I'm going to be doing a full disassembly guide that's a lot easier to follow than the "engrish" version korea put out for us english speaking techs when my new roll of 3m tape comes in. =P
This cracking is caused by a small piece of sticky under the back cover you can either remove the sticky or ad some more this would prevent the cracking...
I posted a service guide here on XDA search my name for it... It will show how you can remove the back cover... just when taking it off remember the back can crack easy and the plastic can ding or dent rather easy and make sure you don't mess up the power button or the volume buttons
ruthlessbeatle said:
solid here....this msg bug you guys are talking about, is it when your typing the sceen jumps and your back at the start of the msg?
Click to expand...
Click to collapse
Hey everyone, so my buddy recently dropped his Galaxy S3 in bath water. He ended up buying a new phone thinking the phone was dead but he turned it on a few days later and it worked. Everything works EXCEPT the touch buttons next to the home button. I bought the phone off of him for $150 thinking I can fix it but as I research video and threads online.. it seems much harder than I thought. I know that soaking the phone in 99% isopropyl alcohol can fix a lot of water damage problems but I'm not sure if I should soak the motherboard in it as it's working fine other than the touch sensor buttons. Should I dip only a part of the front frame (where the touch sensors are) in isopropyl alcohol stopping right below where the LCD screen starts?
I'd like to change the frame as well since there are some scratches here and there along with the home button. It works but the button is scratched up a bit.
Do you guys have any advice for me? The phone is currently disassembled btw if that helps.
Could always download lmt launcher and not worry about it?
Sent from my SAMSUNG-SGH-I747 using xda premium
Or modify your build.prop to add capacitive buttons
Sent from my SGH-I747 using Tapatalk 2
Just use a ROM that has navbar settings and dont worry about the buttons. I dropped my old optimus t in water and yea it comes back to life , but the uncertainty of how long it will work is terrible. A few weeks after it happend phone screen flickering and it just died.
Best thing to have done was pull the battery and let it dry for two or three days
Sent from my SGH-I747 using Tapatalk 2
Lots of ways to just bypass the buttons all together. Like thwy all said use a custom ROM and nav bar. Just let it dry and leave it be. Good luck.
Oh and give lmt launcher a shot too
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I would definitely research cleaning it properly.
The water residue will eventually crust up and cause connection issues or shorts.
CZ Eddie said:
I would definitely research cleaning it properly.
The water residue will eventually crust up and cause connection issues or shorts.
Click to expand...
Click to collapse
What do you think is a good way to clean it? Dip the main board in isopropyl alcohol?
I am a tech junky, the first thing I would do is take it 100% apart and clean every inch on the inside. Eventually the stuff inside of that phone will turn cruddy from the bath water. $150 for a SGSIII is a hella good deal, rip it apart and give it a good cleaning.
Thanks yeah I thought it was a great deal, I could've asked him to drop it less but I felt bad since he was my friend. Phone is brand spanking new and only used for 2 months.
I'm thinking about buying a new whole front piece (LCD, digitizer, frame) though.. what do you guys think? I can get it online for $230ish and not sure how much I can get for my existing front piece.
artluo100 said:
Thanks yeah I thought it was a great deal, I could've asked him to drop it less but I felt bad since he was my friend. Phone is brand spanking new and only used for 2 months.
I'm thinking about buying a new whole front piece (LCD, digitizer, frame) though.. what do you guys think? I can get it online for $230ish and not sure how much I can get for my existing front piece.
Click to expand...
Click to collapse
I would try to fix it before going for a new front piece. Getting that new front piece + the 150$ you already paid = the price of a brand new S3 on ebay.
If it's himidity keeping them from working, leaving the phone in a seeled bag of rice for a couple days can fix it.
If you have the $$$ laying around to do it I would say go ahead. It may help the resell value down the road. I can't stand this phone naked, it feels like a big wet bar of soap in my hands. I would preserve the $$$ spent and put it in an Otterbox Commuter.
I was thinking about making back the money by selling the original piece. Not sure how much I can get for that though. The only thing holding me back is replacing the silver bezel around the LCD. You have to remove everything and swap it over including LCD, glass, buttons, etc. Sounds like a big risk for someone like who who has never done this type of work before.
artluo100 said:
I was thinking about making back the money by selling the original piece. Not sure how much I can get for that though. The only thing holding me back is replacing the silver bezel around the LCD. You have to remove everything and swap it over including LCD, glass, buttons, etc. Sounds like a big risk for someone like who who has never done this type of work before.
Click to expand...
Click to collapse
Well if getting someone to do it for you doesn't cost much, could be something to look into.
Yeah currently looking for someone to do that for me. Not sure where to look... all these cell phone repair places want to replace the whole piece PLUS they keep your LCD for "recycling" which means they'll take my LCD, repair it and sell it to the next sucker for $200 something.
I'm in NYC btw.. so by any chance any of you know someone in the area who has experience doing this, please let me know. Thanks!
artluo100 said:
Yeah currently looking for someone to do that for me. Not sure where to look... all these cell phone repair places want to replace the whole piece PLUS they keep your LCD for "recycling" which means I'll take your LCD, repair it and sell it to the next sucker for $200 something.
Click to expand...
Click to collapse
Haha. Well mobiletechvideos.com is well known around here, could be an option. I dunno how he proceeds though.
BWolf56 said:
I would try to fix it before going for a new front piece. Getting that new front piece + the 150$ you already paid = the price of a brand new S3 on ebay.
If it's himidity keeping them from working, leaving the phone in a seeled bag of rice for a couple days can fix it.
Click to expand...
Click to collapse
+1
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Soaking it in 99% isopropyl alcohol right now. gave the mainboard a scrub down with a toothbrush about 1.5 hrs in. Also scrubbed the back of the touch screen, whichever resistors and chips I saw.
Fingers crossed.
Quick question.. how long should I let the parts dry after taking it out of the alcohol? It seems like alcohol evaporates pretty quick but the smell of it stays.
Hi,
I dropped my S3 in a pool. I left it off for a couple days with the battery removed. After a couple days I decided to open up my phone. I noticed some corrosion in the back of the motherboard and cleaned it off with alcohol. My phone turns on but the screen doesn't. I looked at the motherboard and doesn't look like it fried. Is there a way for me to troubleshoot to figure it out why the screen is not turning on?
How long did it last in the pool? . Those days that it was off did you tried the old rice in a bag trick? Your probably doing more harm than good trying to keep turning it on might be paper weight now.. Or maybe it needs screen replacement. Btw did you turned it on before deciding on opening it to see if it was working?
Sent from my SGH-T999 using xda app-developers app
Thank you all. I found that the LCD connector was corroded (had to use a magnifying glass). cleaned it heavily with alcohol and the screen was working again!
next problem is that the microphone is not working. How can i troubleshoot or repair this? i cleaned the microphone hole, still didn't resolve the problem. Is the mic something i can replace?
I believe they sell replacement mics on eBay for a few bucks. Not sure how hard the install would be, definitely worth a shot though!
Sent from my SGH-T999 using xda app-developers app
Do you know the exact part name? I tried doing an ebay search and couldn't find it
The ebay item number is:
400465424494 Put that in the search and it should pop right up.
Sent from my SGH-T999 using xda app-developers app
Mine went in the pool for less than 10 seconds, and was in a casemate case, and its fine except the speaker, (i may have damaged it blowing into it to dry out the phone; but this is the 2nd dip this phone has had, and both time came out pretty much ok... new speaker assy cost me under $7 on ebay and these phones are SIMPLE to get apart.. going to try to clean connector on existing speaker now that you said it fixed your screen issues...
tl;dr
Mine got wet and works still too!
***EDIT*****--- alcohol worked, speaker is good now!
tbirdguy said:
Mine went in the pool for less than 10 seconds, and was in a casemate case, and its fine except the speaker, (i may have damaged it blowing into it to dry out the phone; but this is the 2nd dip this phone has had, and both time came out pretty much ok... new speaker assy cost me under $7 on ebay and these phones are SIMPLE to get apart.. going to try to clean connector on existing speaker now that you said it fixed your screen issues...
tl;dr
Mine got wet and works still too!
***EDIT*****--- alcohol worked, speaker is good now!
Click to expand...
Click to collapse
Alcohol does wonders! Glad you got it working.
I just ordered the replacement mic. Let's see how it works.
Hope that fixes the problem for you.
Sent from my SGH-T999 using xda app-developers app
Attached is a photo of my replacement mic and my phone. Any idea how I'm supposed to install this thing?
samsunguser123 said:
Attached is a photo of my replacement mic and my phone. Any idea how I'm supposed to install this thing?
Click to expand...
Click to collapse
Try using the Ifixit app. It may help on properly installing the mic or at least give you a general idea of how to do so. It will also give the names to many of the parts on the motherboard.
LuigiBull23 said:
Try using the Ifixit app. It may help on properly installing the mic or at least give you a general idea of how to do so. It will also give the names to many of the parts on the motherboard.
Click to expand...
Click to collapse
Thanks, the app is pretty useful but doesn't have any information about replacing the mic.
Unfortunately stuff like that is often the put it in the way you take it out kinda fix. I'd be surprised if you found any guide on this one.
Sent from my SGH-T999L using xda premium
Do the rice in the bag trick?
Current rom/kernel: Liquid Smooth 2.5/ktoonsez
thanks for the info in this thread! my S3 went with my shorts in the washing machine 2 weeks ago. same issue, everything is working except the mic... i bought the replacement off ebay today, ill report back with ease of replacement!
thanks again XDA, ya'll rox sox!