Related
Anyone know where one can be brought? also why have I read stuff about the s2 having mini usb? it doesn't it has the same propriety connector as the galaxy s.
It's MHL. It's the supposed new 'standard' for connectivity. I think most devices are using that connection nowadays. Last I heard was Clove saying the MHL adapters won't be out until June.
DVC1985 said:
It's MHL. It's the supposed new 'standard' for connectivity. I think most devices are using that connection nowadays. Last I heard was Clove saying the MHL adapters won't be out until June.
Click to expand...
Click to collapse
really? so the original galaxy s had mhl as well? Any suggestions on what to do with my fancy new phone? so far apart from being super quick it just seems like a sleaker bigger galaxy s, I cant think of anything my galaxy s couldn't do :S
Oh I know I'm gonna see if the wii mote works on this thing
badasschris said:
really? so the original galaxy s had mhl as well? Any suggestions on what to do with my fancy new phone? so far apart from being super quick it just seems like a sleaker bigger galaxy s, I cant think of anything my galaxy s couldn't do :S
Oh I know I'm gonna see if the wii mote works on this thing
Click to expand...
Click to collapse
I can't find any evidence that it did.
http://en.wikipedia.org/wiki/Mobile_High-definition_Link
It's the new standard, but that doesn't mean older devices support it. The SGS2 is one of the first AFAIK
But nothing on the market will currently work? HDMI out from a mobile is just supercool!
I have both an sgs1 and sgs 2, my charger fits the micro usb (the only i/o connector) on the phones, perfectly
The connectors should be the same on the S1 and S2, but only the S2 is MHL compatible.
I think MHL can use any 5 pin connector to send an HDMI signal while receiving power for charging.
I'm not sure if you'll be able to use the MHL HDMI out and USB at the same time, but I hope this is possible.
I'm also guessing that the adaptor will need to be a clever one with circuitry rather than a passive adaptor. Does anyone know if this will definitely be the case, and if so I'd imagine it'll have cost implications! Hope I'm wrong and a passive adaptor is possible
Coming from a LG Optimus 2x, that came with a Micro USB ---> HDMI cable. These are available from Ebay for a GBP 10 - would these work?
Yea guessing its just MHL compatible as the old port was usb compatible. Thats annoying, with all the talk of this new standard usb-hdmi port I was assuming it would use a standard connector and not a proprietary one.
It stupid really if all manufacturers used the same connector we wouldn't have to have multiple chargers/docks/cables
You can't use the USB port for MHL and USB functions at the same time, this is confirmed (if you search for MHL at youTube there is a great video with a person from the MHL consortium explaining it).
To badasschris: this isn't a proprietary port. Samsung, Nokia, Sony, HTC, Toshiba, and quite a few other partners are involved with it, it seems likely to become the standard for mobile devices (iPhone aside, I am sure Apply will continue to push their proprietary ports).
NZtechfreak said:
You can't use the USB port for MHL and USB functions at the same time, this is confirmed (if you search for MHL at youTube there is a great video with a person from the MHL consortium explaining it).
To badasschris: this isn't a proprietary port. Samsung, Nokia, Sony, HTC, Toshiba, and quite a few other partners are involved with it, it seems likely to become the standard for mobile devices (iPhone aside, I am sure Apply will continue to push their proprietary ports).
Click to expand...
Click to collapse
Are you absolutely sure it isnt proprietary? Why I am getting confused is because it has the same port as the galaxy s1 and I heard nothing about that being a standard port and you always have to buy a samsung charger not a [standard port] charger e.g. mini usb charger for any devices which have mini usb. So you are saying at some point the other manufactorers will have the same port and I will be able to use my galaxy s charger to charge them?
Galaxy S is a standard micro USB port, and lacks the MHL connection, its not proprietary at all, I use several non-Samsung cables to charge the phone in my car and from PCs. Most manufacturers, Apple excluded, use micro USB charging now.
The port in the Galaxy SII is not the same as the Galaxy S, as it has MHL connectivity in addition, but its function as a micro USB port for mass memory and charging is perfectly standard, and doesn't require special cables or connectors of any kind.
NZtechfreak said:
Galaxy S is a standard micro USB port, and lacks the MHL connection, its not proprietary at all, I use several non-Samsung cables to charge the phone in my car and from PCs. Most manufacturers, Apple excluded, use micro USB charging now.
The port in the Galaxy SII is not the same as the Galaxy S, as it has MHL connectivity in addition, but its function as a micro USB port for mass memory and charging is perfectly standard, and doesn't require special cables or connectors of any kind.
Click to expand...
Click to collapse
lol I had to thank you there I've been a right plonker. I remember seeing someone say the origional galaxy s was micro usb and then when I saw it I thought that't not micro usb. It just clicked I have been getting micro and mini usb confused. When anyone said micro I immediately assumed mini
Glad I got that sorted.
Is it possible to buy an MHL to HDMI cable? Where?
You can't use the USB port for MHL and USB functions at the same time, this is confirmed (if you search for MHL at youTube there is a great video with a person from the MHL consortium explaining it).
Click to expand...
Click to collapse
That sucks. I was hoping to look into making a tablet dock that used a USB capacitive touch screen & HDMI output for the screen.
A laptop dock using Bluetooth for the keyboard and HDMI for the screen would still be possible, or a tablet that used Bluetooth for the touch-screen.
This phone is powerful - it's annoying not to be able to use the hardware for more than just a phone.
I reckon Motorola is thinking along the right lines with the Atrix, and I hoped other manufacturers would be too, but this combined port indicates Samsung are probably not.
DavidMc0 said:
That sucks. I was hoping to look into making a tablet dock that used a USB capacitive touch screen & HDMI output for the screen.
A laptop dock using Bluetooth for the keyboard and HDMI for the screen would still be possible, or a tablet that used Bluetooth for the touch-screen.
This phone is powerful - it's annoying not to be able to use the hardware for more than just a phone.
I reckon Motorola is thinking along the right lines with the Atrix, and I hoped other manufacturers would be too, but this combined port indicates Samsung are probably not.
Click to expand...
Click to collapse
Plus you have the added fact that samsung like to mess with bluetooth meaning many devices wont work with it. I really hope the bluetooth situation gets fixed somehow as this device paired with a screen and a bluetooth keyboard/mouse and game pad gives you a portable computer / games console. without it its just an amazing phone
This should work perfectly with bluetooth mouse and keyboard, my SGSI does. It should also work with a Zeemote, unfortunately it doesn't have enough buttons to be that good for using in emulators.
I can confirm that the igo stowaway bluetooth keyboard works fine w/the SGS2 in case anyone's curious
aonanodad said:
Is it possible to buy an MHL to HDMI cable? Where?
Click to expand...
Click to collapse
Good question. That's what we are all looking for.
So far i have only seen two places selling them Clove and Expansys are doing it 2 £24.99 they ar egetting them in on the 28th May
I bought these on ebay. The HDMI is short but worked but when I connect both cables to lapdock, the USB is not being recognized so the keyboard/mouse is not working. I want this just to act as an extension so I can use full lapdock abilities with cables. Any idea what's going on (cable charges on plug but does not charge on lapdock)? Maybe someone has better usb cables.
fixed the link:
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
links appear to be broken...
From your title I've been looking for these (or similar) cables for a long time and have been unsuccessful. However I have yet to try them.
Fixed the link
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
i don't think it will work either way, tried a few things like this with no avail.
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
mamoranto said:
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
the only reason that is my suspicion is because there are many "charging" products out there that don't really need data. Why there would be a need for such a small charging extension cable is beyond me, but it's the only solution I can think of, but I have no way of confirming or denying it either. The ebay descriptions seem to imply that the data wires are there, but we all know how reliable ebay can be...
Another idea I had was that it might be sensing the resistance in the cable, since, if I remember correctly, that was how some think/though the car dock puts the atrix into car mode without a magnet as is/was commonly used. Again these are just ideas.
Or the cable is just so poorly made that it's defective...I honestly have no clue
Has anyone got full lapdock capabilities using extension cables? I can only get the screen working and not the mouse and keyboard.
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my lapdock to work with the Otterbox
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
If you're asking me, i didn't. I was referring to the ebay link in the third post.
grevedan said:
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my webtop to work with the Otterbox
Click to expand...
Click to collapse
before I read that post, I was looking around the forums and the web yesterday well into the night. here are some of the things I've found that might be relevant to everyone (and it might possibly be cheaper, though more diy).
Micro USB stuff:
I have no idea why this exists http://www.dealextreme.com/p/micro-...r-cable-for-blackberry-9900-black-30cm-107901
I have no idea why this only has 4 pins http://www.sparkfun.com/products/9614
http://www.sparkfun.com/products/10031
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
Here's what I am thinking about doing:
http://www.ebay.com/itm/140626354628#ht_2821wt_1177 or http://www.ebay.com/itm/Micro-HDMI-...ultDomain_0&hash=item415eac6dc0#ht_2821wt_980
http://www.amazon.com/HDMI-Female-M...YPB4/ref=sr_1_2?ie=UTF8&qid=1329854686&sr=8-2
then the hdmi cable that came with our phone:
http://www.amazon.com/Motorola-Stan...QTA8/ref=sr_1_8?ie=UTF8&qid=1329854856&sr=8-8
The HDMI certainly looks like it may work but the reason I didn't buy that product from ebay a few weeks ago was because it was $50. Now miraculously, it's only $6. Maybe I'll get that if the USB cable I just bought that was suggested works a few posts back.
misiek93 said:
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
Click to expand...
Click to collapse
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
everything asked/answered in here is already covered in the original thread:
http://forum.xda-developers.com/showthread.php?t=1376679
robrj said:
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
Click to expand...
Click to collapse
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
robrj said:
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
Click to expand...
Click to collapse
I ordered the USB cable and experience this same problem, though I am waiting for my hdmi parts to come in (by April 6th I should have all my parts...). The cable itself works flawlessly as a micro usb extension cable when connecting it to the computer.
again as mentioned in the other thread, you want to be careful with the 5v coming out that micro hdmi port. for connecting back to your phone would be no issue, as the phone charges using this voltage, but hooking the lapdocks micro usb up to a host device probably wont appreciate the 5v coming back up the cable, where normally the usb device would be pulling power from said host, not providing it.
one suggestion is to just clip the red wire inside your micro usb cable/adapter.
btw the adapters i use do fit snugly side by side, without modification.
I've been following this thread for a little while now, and I wanted to share something I found.
I was looking at the Motorola Travel Webtop adapter. And I was curious to see whether it could be tweaked to suite our needs. I naively thought/hoped that I could flip the connectors in the device to make a small adapter to connect the Atrix to newer Lapdocks. Unfortunately as you can see in the pictures below (sorry not enough posts to link to the pictures) the two connectors are connected via a PCB not wires or a ribbon cable. Although I still have high hopes that I can de-solder the HDMI and USB connectors, and use a small length of flat ribbon cable to connect them and then re-positions the connectors in the case, to build a micro adapter to use the Atrix on the newer Lapdocks. Should this fail this will at least prevent others from making the same mistake, and solve the mystery of what's really inside the Webtop Travel adapter.
Do any one know if this Micro HDMI Cable would work for Lapdock.
http://www.ebay.com/itm/1-Feet-HDMI...s_Adapters&hash=item416612cecb#ht_1149wt_1187
Description says for Asus tf201 MEMO ME171.
I believe all Cables are standard. Can this used to Atrix 4g with Lapdock?
I have otterbox case for Atrix and don't want to Remove cover everytime to plug in Lapdock.
Has anyone found a MHL cable that also includes a USB OTG port? Samsung reportedly changed from a 5-pin configuration to an 11-pin configuration to allow MHL with USB Host mode simultaneously. Perhaps for a future Desktop Mode?
Has anyone been able to find one of these cables?
Just wanted to update, I believe I found the type of connector that I was looking for, but it is missing HDMI and it is sold out. This essentially could give you PC type connectivity on the S3.
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
I think we still have a bit of a wait. What you found is essentially a USB OTG hub with some card readers built in. I seriously doubt this will pass through the pins for HDMI to work out of the usb port. We'll see something when this phone finally launches everywhere. It's not even out in the US officially yet
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
kynolin said:
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
Click to expand...
Click to collapse
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
I'm looking for a dock with USB OTG, charging and MHL. Maybe some day.
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
kthung said:
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
Click to expand...
Click to collapse
for me at least i already have several keyboards and mice ... none are bluetooth.
I'm looking for the cheapest option available.
I'm just hoping someone releases a cable with 4 plugs:
Male MHL - To Phone Obviously
Female MicroUSB: To plug in charger
Female HDMI - To Display
Female USB - To USB Device
That's all I want... should cost less than $2 to make, just sell it for $20 and I'd be happy.
v8bait said:
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
Click to expand...
Click to collapse
hi v8bait, are you able to get data thru the micro usb port at the side of the 11-pin mhl adapter? i was thinking of using the motorola lapdock with my s3 thru the mhl adaptor (other then a micro hdmi male connector, the lapdock also has a micro usb male connector that apparently send out power as well as push keyboard/trackpad data upstream) - if it works, we can have an inexpensive "clambook"
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
romulusram said:
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
Click to expand...
Click to collapse
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
macdroid01 said:
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
Click to expand...
Click to collapse
We're in the same boat; i want to use the s3 like a mini computer too. I think it'd be great for business travel, when i dont really need a laptop during the day but want something when i'm back in hotel room. I'd much rather use hotel TV instead of a laptop because that's what i am used to at home... pc hooked to TV.
I've been planning to use the allshare cast dongle too, but they dont seem to be available yet. I was thinking HDMI out with the allshare.. charging with the wireless charging kit and then keyboard and mouse with USB OTG. My logitech unifying receiver for keyboard/mouse works perfectly i just need the wireless charging and allshare dongle to be released.
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
faulkton said:
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
Click to expand...
Click to collapse
Wait so your saying you tried a (a) powered USB hub with a OTG cable connected to the phone or you tried a (b) powered USB hub connected with a OTG cable to the MHL adapter and then to the phone?
If it was (a) then there are some vids out there of ppl using powered USB hubs.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
I'm puzzled that there aren't any more postings about this kind of stuff. I was expecting the GS3 to be easy to use as a "PC" replacement but it seems no one besides us few wanted to do that ? A simple cable should have done it but I'd even be willing to shell out 40-50$ for a decent dock that would do just that
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
Me too.
But it is possible to get that this way working:
Code:
S3 -> Mobile Fun Connection Kit -> microusb -> HDTV Adapter TIP (5 to 11 Pin Converter) -> MHL HDMI adapter
|
-> USB -> keyboard etc.
Links
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
http://www.samsung.com/us/mobile/cell-phones-accessories/EPL-FU10BEGSTA
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
I have the official MHL adapter and there is no female USB port on it for OTG
badbeat33 said:
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
Click to expand...
Click to collapse
You are not reading it right.
they want to use the MHL adapter, too.
As far as i can tell, the MHL adapter needs to be in the phone, not a hub. it is all dictated (the output being OTG, or MHL) by the impedance of what is plugged in. It is an either or situation.
Perhaps with a firmware update they MIGHT be able to run both signals and split it.. but i doubt it.
Has anyone connected their Galaxy S III up to a Motorola Atrix Lapdock?
If I remember well, the Motorola lapdock uses a HDMI plug to connect with the Atrix.
GS3 doesn't have one, you should get a MHL/HDMI convertor. Don't know if it'll work as a native HDMI plug will do.
If someone have both, it could be intereting to see if that work
So I'm going to dust this thread off a bit because this is the project I'm looking to work on -
I've ordered an Atrix Lapdock for my Bionic (very simple mod to dock the bionic) but as my personal phone is an S3, I'd like to use the lapdock with it primarily while still having the option to dock the bionic while on the go (I carry both phones). (While I'm at it, I'll probably look to get an hdmi micro extension cable and usb-micro-male to usb-A-male extension and try and use the lapdock as the base station for the Samsung Slate 7 PC i barely use since the interface is so poor)
Here's what I've gathered by reading various threads.
Lapdock:
The Lapdock will work with any HDMI source as seen in other threads (ie connecting to a PS3 via hdmi female micro to hdmi male standard adapter, $4 part from dealextreme). Others have posted how they can use the lapdock as a self powered hdmi external monitor with their laptop (very cool usage btw considering it's size)
Droid Bionic:
easily docks to the Atrix version of the lapdock by simply rotating the hdmi/micro usb connectors 180degrees in their sockets since they're piped in with short cables.
Galaxy SIII / S3 (mine is the T999):
here's where it gets tricky.
As I've gathered about the 11pin micro usb port (on the S3 and shared by the Note 2):
the original 5 pin MHL standard was ditched in favor of the 11pin MHL type connection. this in theory would allow the use of hdmi output with simultaneous usb otg and charging capabilities.
reviewing this thread here: (showthread.php?t=1953061&page=2) one can see that an OTG cable was modded with a simple resistor to allow for charging - member triff (the OP) was able to get this going and noted the log he got when the cable was plugged in reported 'hdmi fail' which leans to failing to initiate an hdmi connection... later in the thread member MRBR7 alludes to having an hdd running to view while charging on the OTG cable - his post is a bit vague as to whether he did the mod on an OTG cable or an HDMI cable.... i'll have to follow up.
finally, the posts in this thread (first 12 pages are a quick read showthread.php?t=1741583&page=12) provide resistor values and some close ups of the boards for the 11 to 5 pin adapter as well as what I thought was a list of pins for the 5 pin MHL.
I'm really trying to be purposefully clear in this thread as to my findings because it seems there are too many vague threads out there regarding the functionality; simply missing a letter or punctuation in a thread can turn a sure thing into a vague post...
another avenue is the official samsung galaxy note 2 "smart dock" which has 3 usb ports, in additon to an hdmi output and charging input - since this is sold out in the US (and due to PAL vs NTSC Standard I am hesitant to order from germany) it'll be a while before I can personally buy and test one (unless i can find one locally somehow). this seems like the best bet for a dock which can be hacked or adapted to interface the s3 with the lapdock.
my ideal final outcome of this thread would be to have a small cable or interface box which i can plug into the s3 to enable hdmi output + usb otg + charging. that trifecta would connect via a single micro-usb to the device (11 pin) and have an output of a female usb (A or micro, either can be adapted) and either a male or female standard hdmi (again, both of which can be adapted). this cable could enable the phone to be used as an impromptu desktop, carputer, lapdock brain etc...
Lapdock software required...
Sent from my SGH-T999 using xda premium
deedscreen said:
Lapdock software required...
Click to expand...
Click to collapse
What do you mean by that?
The Atrix Lapdock is internally nothing but an 1366x768 HDMI LCD monitor with (rather poor) speakers and an USB-Hub on which a keyboard/touchpad and two free USB-ports are connected to. The monitor and the USB-hub have to be simply attached to any device which supports HDMI-output and USB-OTG via (slightly uncommon) HDMI- and USB-OTG-plugs.
There is no software running on the Lapdock (it is actually completely dumb) and there is no need for any specific SW on the connected device (might be nice to have something like webtop running but it is not necessary).
The S3 works flawlessly with the keyboard/touchpad/USB-hub using a USB-OTG-Adapter and with the HDMI-monitor via an MHL/HDMI adapter cable. The tricky part is only to get both simultaneously and possibly even charge the S3 from the Lapdock. For that purpose I use as long as there is no combined MHL-HDMI/USB-OTG-adapter/dock available (as described in the thread and page already indicated above: showthread.php?t=1741583&page=12 ) the allshare cast dongle and a cheap OTG adapter. You can use office apps, watch videos, play games etc. without any problem. You can check out
ecx . images-amazon . com/images/I/712%2BAbT1u3L.png
(no links for me yet)
to see how that looks like...
a32quaeler said:
What do you mean by that?
The Atrix Lapdock is internally nothing but an 1366x768 HDMI LCD monitor with (rather poor) speakers and an USB-Hub on which a keyboard/touchpad and two free USB-ports are connected to. The monitor and the USB-hub have to be simply attached to any device which supports HDMI-output and USB-OTG via (slightly uncommon) HDMI- and USB-OTG-plugs.
There is no software running on the Lapdock (it is actually completely dumb) and there is no need for any specific SW on the connected device (might be nice to have something like webtop running but it is not necessary).
The S3 works flawlessly with the keyboard/touchpad/USB-hub using a USB-OTG-Adapter and with the HDMI-monitor via an MHL/HDMI adapter cable. The tricky part is only to get both simultaneously and possibly even charge the S3 from the Lapdock. For that purpose I use as long as there is no combined MHL-HDMI/USB-OTG-adapter/dock available (as described in the thread and page already indicated above: showthread.php?t=1741583&page=12 ) the allshare cast dongle and a cheap OTG adapter. You can use office apps, watch videos, play games etc. without any problem. You can check out
ecx . images-amazon . com/images/I/712%2BAbT1u3L.png
(no links for me yet)
to see how that looks like...
Click to expand...
Click to collapse
Interesting..especially for the 89$ price tag. Long as one can deal with S3 not charging its a simple setup no ?
xManMythLegend said:
Interesting..especially for the 89$ price tag. Long as one can deal with S3 not charging its a simple setup no ?
Click to expand...
Click to collapse
Well, I got the Lapdock for less than 70 Euros and I think that is really great value since it is very well build and versatile... the allshare cast dongle is a bit overpriced (currently it is about 55Euros here) for an adapter-replacement but if you need it for different use cases (I mainly have it for a small LED-beamer) it might be worth it.
You can charge the S3 from one of the USB-ports of the Lapdock using a micro-USB cable (as long as the dongle or any other device is connected to the Lapdocks HDMI-plug - that is what signals the Lapdock to power up), but you can not simultaneously use the MHL/USB-OTG then. So it is nice for watching movies from your S3 on the Lapdock-screen (btw. the sound works fine as well) while re-charging the S3 but for "office" work with kb/touchpad you have to replug the OTG-cable. Actually I'm quite impressed with the relatively low power consumption of the allshare cast connection - so that is not a real problem IMHO. There might be people out there to solder the right resistors into OTG-adapter cables to allow both...
One disadvantage is obviously that you have this "bulky" (it is actually lightweight but still bigger than a simple adapter) dongle on the Lapdock. The big advantage over a dock is that you can more or less freely move around the S3 while using this combination.
deedscreen said:
Lapdock software required...
Sent from my SGH-T999 using xda premium because i'm a moron and don't know what i'm talking about
Click to expand...
Click to collapse
you obviously don't know anything about the lapdock, so please, hang around, do some searching and learn about what it is before posting vague comments that ruin the integrity of a factual thread.
xManMythLegend said:
Interesting..especially for the 89$ price tag. Long as one can deal with S3 not charging its a simple setup no ?
Click to expand...
Click to collapse
google 'bens outlet' (a 1saleaday company) and you can pick one up for as little as $50usd! assuming it actually ships out, but worth it for a spare monitor project at the very least... - and yes, not a hard setup at all - the first use in my mind would be just to have a full size screen on the go, however to have a cable capable of mhl/hdmi + usb otg + charging would turn the dock into a powerhouse android laptop using 4g internet etc... (it'll give the chromebook a run for it's money)
a32quaeler said:
the allshare cast dongle is a bit overpriced (currently it is about 55Euros here) for an adapter-replacement but if you need it for different use cases (I mainly have it for a small LED-beamer) it might be worth it.
Click to expand...
Click to collapse
what's this LED beamer? (i'm just intrigued)
a32quaeler said:
You can charge the S3 from one of the USB-ports of the Lapdock using a micro-USB cable (as long as the dongle or any other device is connected to the Lapdocks HDMI-plug - that is what signals the Lapdock to power up), but you can not simultaneously use the MHL/USB-OTG then. So it is nice for watching movies from your S3 on the Lapdock-screen (btw. the sound works fine as well) while re-charging the S3 but for "office" work with kb/touchpad you have to replug the OTG-cable. Actually I'm quite impressed with the relatively low power consumption of the allshare cast connection - so that is not a real problem IMHO. There might be people out there to solder the right resistors into OTG-adapter cables to allow both...
One disadvantage is obviously that you have this "bulky" (it is actually lightweight but still bigger than a simple adapter) dongle on the Lapdock. The big advantage over a dock is that you can more or less freely move around the S3 while using this combination.
Click to expand...
Click to collapse
all very cool - I'm thinking of ordering the allshare dongle just to try this out until the smartdock gets back in stock to hack it apart .. I'll probably order an 11pin mhl in the meantime too. I have a 5pin mhl, not sure what I can do with it without the adapter (i'll probably bundle it with my galaxy nexus and sell it all)
@a32: on a side note, i broke down and bought a Note 2 yesterday haha, so I'll probably be continuing this project with the Note2, (tmo just happened to have some in stock haha) I'm putting my week old S3 up for sale soon, but this project is still on my radar!
teshgnex said:
you obviously don't know anything about the lapdock, so please, hang around, do some searching and learn about what it is before posting vague comments that...
Click to expand...
Click to collapse
The S3 would need the lapdock .apk for certain functionality... calm down, I've owned enough Motorola Android devices to know what I'm saying...
Thats all... Ben's Outlet would be good plus All4Cellular sells it with the extenders...
Its out of stock now but you can get the extenders separately at a hefty price:
www.all4cellular.com/motorola-atrix-4g-laptop-dock-hdmi-upgrade-kit.html
The hefty priced cables are below, but it is worth the cost:
www.all4cellular.com/motorola-atrix-4g-upgrade-kit.html
deedscreen said:
The S3 would need the lapdock .apk for certain functionality... calm down, I've owned enough Motorola Android devices to know what I'm saying...
Click to expand...
Click to collapse
Sorry to snap, but if you've been on enough forums, you begin to notice that comments like yours are just add to confusion when unsubstantiated.
Any phone without a 'web top' mode or apk would obviously not work similar to the webtop mode that Motorola intended, however it'll still work, perfectly in fact, because this connection project is akin to hooking up your phone to a tv or monitor and using a usb mouse and keyboard to control it, albeit it's portable, like the padphone.
If you have any ideas as to how one could hookup both mhl/hdmi and usb/otg with charging I'm all ears (the real breakthrough would easily be seeing a US version T999 or similar running with the Smart Dock for the Note 2
Another thought to throw out there is whether this finished product could look similar to the padphone concept: a pocket for the phone to slip into, docking connector inside, basically self contained
As for those extension cables posted, places like monoprice and dealextreme have much better prices and selection, granted I'm just going those links on my phone - i don't understand how those are considered 'adapters' when all they do is extend the port
Sent from my SGH-T889 using xda app-developers app
Silly question but why would you need software when your using it as a monitor, keyboard, mouse, usb hub & charging?
djashjones said:
Silly question but why would you need software when your using it as a monitor, keyboard, mouse, usb hub & charging?
Click to expand...
Click to collapse
You don't.
... that's what we posted already. The webtop SW on some Motorola devices starts a specific desktop and window-manager on your phone when connecting to the lapdock. It may facilitate the use of the apps on the phone via the Lapdock (resolution/size/... of apps in windows etc.) but you do not need it to work with the S3 on the Lapdock.
awesome! im very tempted to get one but in the UK they are still expensive
teshgnex said:
what's this LED beamer? (i'm just intrigued)
Click to expand...
Click to collapse
A bit off-topic: It is an ACER C20 I own for nearly 2 years now. Like this one:
ecx . images-amazon . com/images/I/41aXbNerVoL._SL500_.jpg
It is out of stock anyway, but I could "partly" recommend it:
It has the size of a phone, a built-in battery and - most important - lots of inputs (mini HDMI (HDCP), D-Sub (24-pin Universal), Composite Video/Audio (2.5mm 4-pin mini jack), micro USB (Typ AB), micro SD Card (SDHC)) + Audio out & speaker. It plays media from internal storage/SD card but that internal media-player is crap. It is however extremely mobile and together with movie players on modern phones like the S3+cast-dongle - or any tablet with HDMI-out or a device with Composite A/V out (e.g. old Nokias) - a nice device e.g. to entertain kids on travel or showing pictures while visiting the grandparents or alike. On the other hand, it is not really bright at all (actually you have to be in a very, very dark room to use larger screen areas) and the battery lasts often only 1/2 hour (but you can charge it with 5V from USBs or use it while on the mains adapter).
It works really nice with the S3 + allshare cast dongle (that's what I bought the dongle for in the first place), has a descent image quality (848x480 pixel) and accepts up to 1080i HD over HDMI as input signal for downscaling but for the dongle the input is of course limited 720p. It does NOT work with the S3 using the cheap (chinese) USB-MHL/HDMI-adapter with the long red cables (somewhere discussed here as well) since that one provides 1080p30Hz (at least to my TV - on which it works) and the projector obviously can't sync to that.
Back to the topic: that cheap HDMI-adapter for S3 works not very well with the Atrix Lapdock; you get an image but it is vertically squeezed. Again: the Lapdock and the S3 + cast dongle go together extremely well.
That led projector sounds pretty cool, I've waffle'd on buying one various times but can't say I've had a particular need other than for the fun of it hah
a32quaeler said:
Back to the topic: that cheap HDMI-adapter for S3 works not very well with the Atrix Lapdock; you get an image but it is vertically squeezed. Again: the Lapdock and the S3 + cast dongle go together extremely well.
Click to expand...
Click to collapse
So I'm guessing you've tested this, but with the hdmi cable and the screen rotation turned on, the device still shows up in portrait? Unless I'm reading that wrong and you mean it's width wise video but looks like a 4:3 video on a 16:9 widescreen?
I wonder if that behavior is present with the official adapter...
So to return to the method of the allshare dongle, does it look like image 1 as i posted?
I recall you mentioned the dongle's hdmi signal is what triggers the docks micro usb port for kb/mouse control and charging, so for clarity i drew the wiring method up.
The next two wiring diagrams are what I'd expect to do as i finalize what the connection should/could look like...
I'm always in for feedback on streamlining the connections - the simple yet two part method will be just having the official smart dock, assuming it works with the s3, powered with one usb port, hdmi to hdmi mini and usb micro to the usb port, though maybe modify the output to delete charging power from the kb/m micro usb port...
Sent from my SGH-T889 using xda app-developers app
teshgnex said:
I recall you mentioned the dongle's hdmi signal is what triggers the docks micro usb port for kb/mouse control and charging, so for clarity i drew the wiring method up.
Click to expand...
Click to collapse
Sorry, don't have much time and will have a look at your drawings later... The presence(!) of a device connected to the HDMI is detected by checking for a "Ground"-connection of one of the HDMI-pins (from googling I remember it to be HDMI-DDC/CEC) - that's what powers up the Lapdock (and activates the USB-Ports). No need for an already powered device on that HDMI port. The problem is however that there are many HDMI adapters/extension cables out there which do not pass that specific wire/connection and then the Lapdock will not react when using those. There is however no need to buy these overexpensive Motorola cable sets (those prices are unbelievable!)... my adapters & cables cost in total about 9 Euros.
+5V on the OTG-USB cable from the peripheral device (=Lapdock) to the host is not "liked" by most hosts (the S3 did not really react on it but it is probably not a good idea anyhow) so I cut the 5V red wire of the micro-USB(female)-to-micro-USB(male)-cable. On the latter you need something to signal the S3 the OTG mode (pin 4 grounded to 5). I do that quite stupidly using additional USB->OTG-adapters but you would have to take care of that in your MHL/OTC combi adapter with resistors etc. anyhow.
The "chinese" Adapter is vertically squeezed. The S3 goes into the correct HDMI-out mode including the (stock) homescreen to be usable in landscape mode - that is not a problem. Probably the 1080p30Hz mode is not well understood by the Lapdock and/or the adapter does not correctly "negotiate" the right resolution-/display ratio with the display or the quality of the sync signal from the adapter is really bad. That chinese adapter is not too bad for Full-HD TV sets but unusable for anything else. I did not try the official one. The Lapdock works however well with the dongle.
This info is much appreciated. I took the dive and ordered a lapdock from bensoutlet.com for $50 to play with. The regular one is $60 - but the keyboard that adds Hebrew letters was $10 cheaper. I figure the lettering doesn't hurt anything so I'd rather save the $10.
If anybody figures out how to simplify the connections, or perhaps someday enable MHL out + USB host with this thing - please post back.
Right now - I spent an additional $6 on dealextreme.com to get a microHDMI (female) to HDMI male adapter, and a micro usb female to male adapter so I can try to use the keyboard.
The result is going to be pretty cluttered, but I figure $50 is cheap for a portable, self powered HDMI monitor that could also power stuff from it's ports.
teshgnex said:
The next two wiring diagrams are what I'd expect to do as i finalize what the connection should/could look like...
Click to expand...
Click to collapse
Your drawing No 1 is what I use (see below). No 2 is how it should be indeed (but where is the "modded cable" coming from?). While No 3 will not help you since only the presence of a shortened HDMI-CEC pin (+ opening the display a bit) will power ALL the USB-ports including U1+U2 (that activity mode of the Lapdock is indicated by a small white LED next to the touchpad) - so there is no "pre-power" available. But (again) anything that provides that ground contact on the HDMI-plug will do the trick... I actually have one 90degree HDMI-adapter (don't know how to call it in English), which does exactly that and shortens those pin(s) and simulates to the Lapdock the presence of a device (I assume that is NOT on purpose but it works with a second, identical adapter as well). Don't take me wrong you do not need that one if you conect a device (any) directly to the microHDMI-to-HDMI adapter but it is needed when you use HDMI extension cables (etc.) that do not pass all wires to the HDMI device.
I attached some pics how I wire that thing. Pic 1: the micro HDMI plug on the Lapdock is turned by me by 180deg just to make a bit more room for the microHDMI(fem)toHDMI(male)-adapter. You may directly attach the dongle to it (it is relatively stable and easy to carry around - pic 2). That's what one could call "entertainment mode" since you may want to watch videos etc. this way. But than you have not enough space for the microUSB-cable for kb/mouse. That is what I use the 90deg-adapter for. This adapter alone signals already the Lapdock to power up (no other HDMI-cable or adapter I own does this). Back to pic 1: The microUSB(fem)-to-microUSB(male)-cable has the red 5V wire cut. The microUSB-to-USB + USB-microUSB-OTG(!) adapter is there only to signal the OTG-host mode for the S3. The stuff on the right are things you may use on the free USB-port.
That strange device with the mobile speaker attached to its headphone jack has to be explained: it is a (5 Euro) "USB sound card". That is a bit odd... the Lapdock has stereo speakers which are working well (but not great) and the audio-output via HDMI(cast) to the Lapdock works perfectly (sound is ok and in sync when watching videos & you can control volume etc. from the S3 or the Lapdock keyboard) but the allshare cast SW on the S3 does not allow you to plug in a headphone or connect a bluetooth audio-device to the S3 for output of the video(!)-sound. You can use headphones for mp3-player music while using an HDMI display etc. but when you switch on a video you have to remove headphones otherwise the allshare connection stops. There might be two reasons 1: HDCP, 2: there is a small lag in video display from the wireless transfer protocol and the audio stream is equally lagged on purpose to be well in sync with the video stream. You may want to bypass that artificial restriction because the Lapdock has NO headphone jack ... and you can by using such a "soundcard" which is fully supported by the S3 but the sound is then indeed a bit "in advance" of the video stream.
Less exotic devices you can attach are external disks/pen drives or even game controllers (all of them work)... Pic 3 shows you how I wire it for "productivity mode"
P0ll0L0c0 said:
This info is much appreciated. I took the dive and ordered a lapdock from bensoutlet.com for $50 to play with.
Click to expand...
Click to collapse
Thank you. 50$ ! When they are as cheap go and get some (or better get many)! The Lapdock is really, really useful and works with many devices.
I originally bought it for the Raspberry Pi but I use it as well with an Archos A80G9 android tablet (not so often since the tablet is big enough anyhow) which has seperated (mini)HDMI and USB-OTG connectors (as it should have been done for all mobile devices including the S3) and used it for my "old" Nokia N8 (miniHDMI as well). In that case USB-OTG does not work since the N8 does not support USB hubs but you can chrge it and watch movies on the Lapdock display with it (in the train ...). The RasPi is powered via the same cable that is used for kb/mouse. In that cable I did obviously not cut the 5V wire. The power the Lapdock provides this way is sufficient to operate the RasPi (+ wifi dongle) ... about 1A is needed for that. So it should be possible to use that power via that OTG microUSB port for the S3 as well ...
What abot the EDD-S20E dock won´t that work with the lapdock ???
Problem is the dock is useless for my next device in 2 - 3 Years....
The allshare cast dongle might stay usefull even with the next gen of android phones....
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
ycavan said:
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
Click to expand...
Click to collapse
Annoyingly I have a Atrix lapdock but I'm not confident about the rewiring so found a good discounted HP Elite X3 lapdock. Only if someone sold the full cable and adaptor package on eBay for the Atrix
haha, it sounds more complicated than it actually is
just remember that the RED cable in the micro usb cables is power, so that's the only one that needs cutting. What I did was:
1. cut the usb cable in half
2. strip a little bit of the non-RED cables and twisted them together.
3. use electrical tape to cover each of the re-attached cables.
4. pull the red leads back onto the black sheathe
5. use electrical tape to go over the junction between the 2 halves of the cable.
All of the other components are things that are easy to order online, Amazon.
ycavan said:
haha, it sounds more complicated than it actually is
just remember that the RED cable in the micro usb cables is power, so that's the only one that needs cutting. What I did was:
1. cut the usb cable in half
2. strip a little bit of the non-RED cables and twisted them together.
3. use electrical tape to cover each of the re-attached cables.
4. pull the red leads back onto the black sheathe
5. use electrical tape to go over the junction between the 2 halves of the cable.
All of the other components are things that are easy to order online, Amazon.
Click to expand...
Click to collapse
Okay I'll order cables and have a go!
Please confirm the 3rd item in your list is a micro hdmi female to micro hdmi female as elsewhere I have seen micro female to standard female. Thanks
jah said:
Okay I'll order cables and have a go!
Please confirm the 3rd item in your list is a micro hdmi female to micro hdmi female as elsewhere I have seen micro female to standard female. Thanks
Click to expand...
Click to collapse
Yes, I use a micro hdmi female to female adapter for my micro hdmi male to normal hdmi male cable.
Suggestion
My take on these DeX apps is straightforward: they’re not great. If you just use them for simple tasks like texting, copying and pasting small bits of text, or dragging and dropping a file or two, it’s fine. Pushing any harder than that is likely to be a recipe for sorrow, however, as things tend to get laggy pretty quickly. I think that’s more the fault of the desktop software than the phone’s hardware, but regardless, it’s slightly disappointing.
I don’t think that’s a reason to avoid buying the Note 10, which is still an excellent phone. But the experience did get me thinking: why did I and so many others have the objectively irrational hope that DeX would unlock new ways of interacting with your phone?
I think it’s because the idea of making a sole computer sits right next to flying cars in the “this is what the future will be” section of our collective unconsciousness.
alexhalessays said:
My take on these DeX apps is straightforward: they’re not great. If you just use them for simple tasks like texting, copying and pasting small bits of text, or dragging and dropping a file or two, it’s fine. Pushing any harder than that is likely to be a recipe for sorrow, however, as things tend to get laggy pretty quickly. I think that’s more the fault of the desktop software than the phone’s hardware, but regardless, it’s slightly disappointing.
I don’t think that’s a reason to avoid buying the Note 10, which is still an excellent phone. But the experience did get me thinking: why did I and so many others have the objectively irrational hope that DeX would unlock new ways of interacting with your phone?
I think it’s because the idea of making a sole computer sits right next to flying cars in the “this is what the future will be” section of our collective unconsciousness.
Click to expand...
Click to collapse
Also if you can run DeX well on a lapdock, you may not need a Samsung Tab S6!.
alexhalessays said:
My take on these DeX apps is straightforward: they’re not great. If you just use them for simple tasks like texting, copying and pasting small bits of text, or dragging and dropping a file or two, it’s fine. Pushing any harder than that is likely to be a recipe for sorrow, however, as things tend to get laggy pretty quickly. I think that’s more the fault of the desktop software than the phone’s hardware, but regardless, it’s slightly disappointing.
I don’t think that’s a reason to avoid buying the Note 10, which is still an excellent phone. But the experience did get me thinking: why did I and so many others have the objectively irrational hope that DeX would unlock new ways of interacting with your phone?
I think it’s because the idea of making a sole computer sits right next to flying cars in the “this is what the future will be” section of our collective unconsciousness.
Click to expand...
Click to collapse
I use DeX with my lapdock instead of my "real" laptop a lot of the time. My emails are on my phone, contacts are on my phone, pretty much all of the gaming apps I use are on my phone. The only time I ever really need my laptop is to play high end games that aren't ported to Android. Now, if only LoD would come out for the note10... :/
Does the Note 10 support the old 1366x768 resolution on the Atrix Lapdock? I remember getting it going on my Note 8 and it's not a supported resolution leading to really unusable low-res blocky everything on the screen.
bchliu said:
Does the Note 10 support the old 1366x768 resolution on the Atrix Lapdock? I remember getting it going on my Note 8 and it's not a supported resolution leading to really unusable low-res blocky everything on the screen.
Click to expand...
Click to collapse
Yup.
Okay, managed to get my old Motorola Atrix working with my Note 10+. Took a different route to the one described above as the female to female couplers are not easy to source. So I used the Rasberry PI cables for the Atrix and my Samsung Note 8 Dex hub, which was free with the Note 8. But I have to use a BT mouse. Otherwise a good solution. But I would recommend the HP Elite X3 lapdock instead if there is not much a price difference on eBay.
ycavan said:
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
[/QUOT
ycavan said:
Here's to let everyone know that dex on the Note 10 works with the old Atrix lapdock very well
In case anyone has one lying around and wants to see it in action, you would want the following accessories:
1. USB-C to HDMI adapter ( I opted for 1 with HDMI, USB 3.0 & USB-C in for power )
2. micro HDMI to HDMI cable
3. Female micro HDMI to Female micro HDMI adapter
Optional:
1. Modified USB A to micro USB cable ( more on this later )
2. Female micro USB to Female micro USB adapter
3. USB Cable + Charger to charge your phone
If all you want is to bring up dex on your lapdock, all you need are the HDMI connectors. You will want to use a Bluetooth keyboard & mouse to navigate dex and will not be able to charge your phone.
Going 1 step further, you can use a multi-function USB-C adapter with HDMI, USB OTG & USB in for power.
Here, you would modify a usb cable to give you access to the lapdock keyboard & mousepad. The lapdock was designed to be an all-in-one setup with the Atrix phone, so the 10 hour battery could also charge the Atrix. <-- That's our problem. So you will need to snip the RED wire in the usb cable to prevent the lapdock from potentially frying your phone or other devices.
Theoretically, you can charge the phone using the 2 usb ports on the back of the lapdock, but it's a trickle effect. It'll take forever and you won't be happy. I did it in a pinch & running any applications under dex still consumed my phone's battery. Plugging it into a charger, though, kept my phone @ 100%.
A big caveat here is the mousepad is NOT multitouch, so I still used my bluetooth mouse for the scroll wheel.
Here's where this becomes a lot of fun... the lapdock screen is great for running emulators in a decent window. I plugged in my shield gamepad with a usb cable into the back of my lapdock and was able to play pretty much anything I wanted to. Still plugged into an outlet kept the phone @ 100% while emulating 100%+ speeds.
The larger screen is also very nice for streaming tv/movies.
There is an option in the Dex control panel to output audio through the HDMI cable, so you aren't relying on your phone for audio.
Anyway, if you have one of these gems lying around, it's a great way to extend the value of this phone.
Click to expand...
Click to collapse
Hi, I'm trying to do the same. I've got a Note 10+ hooked up to my old Atrix lapdock. Note goes to a multiport adapter. From the adapter's USB-A output, I ran a cable to the lapdock's micro-USB. From the adapter's HDMI out, I ran a cable to the lapdock's mini-HDMI. With that, I can use the lapdock's screen but no keyboard or trackpad.
I ran a cable from the adapter's USB-C to one of the lapdock's rear USB ports, after snipping the red wire, but still no kb/m. The phone does charge like this though.
What have I done wrong? TIA.
Click to expand...
Click to collapse
The USB cable going to the micro-USB port on the lapdock needs to have the red cable snipped. What I did was to snip the red cable and pull both snipped ends back, then use a bit of electrical tape to cover that part of the wire so the snipped ends don't accidentally touch anything.
The USB cable(s) going to the rear of the lapdock are fine unmodified.
Dude/Dudette thank you so much!!! It's only because I came across your thread here that I decided to try and resurrect my trusty old lapdock, and now it works perfectly!
Thanks for replying so quickly. I modified the wrong cable - snipped the red wire on the USB cable running to the rear USB-A port. Doh!
ycavan said:
The USB cable going to the micro-USB port on the lapdock needs to have the red cable snipped. What I did was to snip the red cable and pull both snipped ends back, then use a bit of electrical tape to cover that part of the wire so the snipped ends don't accidentally touch anything.
The USB cable(s) going to the rear of the lapdock are fine unmodified.
Click to expand...
Click to collapse