[Q] N00B Question about flashing N7105XXDLL7 ULTIMATE [Link Included] - AT&T Samsung Galaxy Note II

First off i am new to android had blackberries and iphones for the past few years and finally decided to upgrade and get myself an android! I have the Note II SGH-I317M Rogers device unlocked to be used with Telus (csc has been changed to so i can use Telus firmware) i learned how to flash roms yesterday after hours of research and i now feel comfortable doing it. In this post though http://forum.xda-developers.com/showthread.php?t=2016575 i am a little confused. It says "ROM Works with Rogers Note II. See post #3." but apparently those are old versions. Am i safe to use "ULTIMATE ROM v1" from page one? I know this is a little confusing so if you are confused by what i am asking let me know and i will try to clarify.
"Go to Heaven for the climate, Hell for the company."

asd313asd said:
First off i am new to android had blackberries and iphones for the past few years and finally decided to upgrade and get myself an android! I have the Note II SGH-I317M Rogers device unlocked to be used with Telus (csc has been changed to so i can use Telus firmware) i learned how to flash roms yesterday after hours of research and i now feel comfortable doing it. In this post though http://forum.xda-developers.com/showthread.php?t=2016575 i am a little confused. It says "ROM Works with Rogers Note II. See post #3." but apparently those are old versions. Am i safe to use "ULTIMATE ROM v1" from page one? I know this is a little confusing so if you are confused by what i am asking let me know and i will try to clarify.
"Go to Heaven for the climate, Hell for the company."
Click to expand...
Click to collapse
I don't know this ROM. But if it works. It always works. They wouldn't downgrade. Just make sure you get any modem data if needed. You don't want to flash it and then have no data connection.
To be extra safe always have this ready to go.
Firmware for rogers.
http://www.sammobile.com/firmware/?page=8&view=8176
Directions (for at&t use above firmware)
http://androidromupdate.com/2012/11...y-note-2-sgh-i317-original-factory-stock-rom/
You can always go back to square 1
Sent from my GN2 using XDA app.

Thank you very much! I already have the stock firmware on my computer as a backup and i have backed up the CWM recovery.
One more N00B question though what exactly is modem data?
Again thanks for all your help!

asd313asd said:
Thank you very much! I already have the stock firmware on my computer as a backup and i have backed up the CWM recovery.
One more N00B question though what exactly is modem data?
Again thanks for all your help!
Click to expand...
Click to collapse
I think he means the NV backup ( Imei backup) so, if your data connection messes up or somehow your imei becomes 0. you would have a backup of it.

Related

Root SGH-I757

Anyway to root Bell Samsung Galaxy S2 LTE???
I cannot find anything on google or in this forums.
Thanks!!!
yea me either ive been searching for a couple weeks now.... it sucks
Rooting i757M
Am also still looking how to root this thing. The Skyrocket HD is merely the same phone, branded on AT&T carrier and this article made it clear that the phone has been silently put to the side, in favor of the coming S3. (phonesreview.co.uk/2012/05/10/samsung-galaxy-s3-buries-att-sii-skyrocket-hd).
That is, even on samsung online personal profile page, you can even find the SGH-i757M in the list of phone version, to add in your owner's page.
If anyone of you manage to root the phone, thanks to let me know.
Correction: The SGH-i757M can be found in the BAR model section on Samsung profile page and not under Smartphone. Hmm... weird categorization. Are those bar phones not smartphones? Oh, they are mini tablets.
Here is one.
Do you have any procedure to use that files? I just don't want to brick my phone
There's no any special procedure other than flash it with Odin
There're many tutorials about it here and there like that for example.
rxulan said:
Here is one.
Click to expand...
Click to collapse
Has this been tested and confirmed to work? I don't have the device yet but this may make my decision to buy one.
dsixda, well, all I can say is that I flashed it personally (into E120L though) and it worked (including root).
rxulan said:
dsixda, well, all I can say is that I flashed it personally (into E120L though) and it worked (including root).
Click to expand...
Click to collapse
Hey that is great news. I wonder if the CWM for the E120L is compatible then?
I wonder if this works to root the device, as I've read it worked for the Asian versions of the GS2 HD:
http://forum.xda-developers.com/showthread.php?t=1321582
dsixda, I guess it won't be too hard for you to check that as you're recognized developer
You can download the stock I757M firmware with the CheckFus using advanced tab (or using cli only version) with the following data:
Model: SGH-I757M
Product code: SGH-I757ZKMBMC
HIDSWVER: I757MUGLCA/I757MOYCLCA/I757MUGLCA/I757MUGLCA
Yes, I'll try all that as soon as I get my device Always nice to have the stock Odin firmware so that I don't need to dump everything beforehand in case something goes wrong.
Thank you again
Just FYI, the stock firmware is now available at sammobile.com. Grab an account and search for SGH-I757M. The download is much faster than using CheckFus.
Dsixda! So happy your getting this Device, I also want to say thank-you for your Kitchen you created!! Amasing work. Used it all the time with my Evo 3d.
Just got the Samsung Galaxy s2 hd lte with the Bell network, Do you have any plans to incorporate this into your Kitchen??
Also is there any easy Root anyone knows of yet that doesn't involve Odin? Like superoneclick...etc
markdexter said:
Dsixda! So happy your getting this Device, I also want to say thank-you for your Kitchen you created!! Amasing work. Used it all the time with my Evo 3d.
Just got the Samsung Galaxy s2 hd lte with the Bell network, Do you have any plans to incorporate this into your Kitchen??
Also is there any easy Root anyone knows of yet that doesn't involve Odin? Like superoneclick...etc
Click to expand...
Click to collapse
Try the Zergrush method which I linked in the previous page.
I haven't decided 100% whether to get it, as I still love my original S2. But if I get it I will incorporate it into the kitchen, once we figure out the custom recovery method.
I'm assuming any of the Tengrak GS2 HD recovery images (Odin .tar) will work, as long as you don't flash the associated Tegrak kernel for the ES120L/S/K?
You can always flash the stock firmware above in case you mess up.
Tried the Zergrush method, I had no luck. Oh well no big deal for now
markdexter said:
Tried the Zergrush method, I had no luck. Oh well no big deal for now
Click to expand...
Click to collapse
Or flash the first link provided by rxulan in page 1. It's the stock ROM but the system.img has superuser injected in it.
And/or Google for the Tegrak custom recovery in Xda. Just flash one of those recovery.tar meant for the HD, but not the kernel.
ODIN ?
rxulan said:
There's no any special procedure other than flash it with Odin
There're many tutorials about it here and there like that for example.
Click to expand...
Click to collapse
ODIN does not recognise .img or .ext4 files. I understand those are recovery files that CWD can restore but your device should already have been rooted. This is exactly the purpose of this thread, rooting the device first of all. This have been difficult for us to find the right .md5 files to use in ODIN. The device we're trying to root, SGH-i757M.
@ezechias
Odin doesn't recognize the files inside the rooted tar archive (the one linked on page 1), but you can flash them as a tar.md5, which you already know is a preferred format. There are guides online on how to convert it to tar.md5, you can Google it or I can post it later.
First, try to flash the TAR file as is; if it doesn't work then convert to tar.md5, then flash it.
Anyways, it's strange that nobody wants to be the lab rat to test the rooted TAR or the custom recovery that we have already discussed. We have the emergency stock ROM to fall back on if anything goes wrong. Looks like I'll have to purchase this device soon and try it out myself I already have all the files and stock firmware downloaded and ready to go
ICS for E120 K/L/S has been released.
I'm sure the same will happen with I757M pretty soon

Samsung Galaxy S III - SCH-S960L

Wondering if the new Straight Talk model SCH-S960L was going to be supported in the Samsung Galaxy S3 ToolKit anytime soon? I just purchased. I also have a SPH-L710 on Sprint that worked great. Too afraid to use the same settings on this new SCH-S960L just yet.
Thanks!
Scott
SlimBean Rom works on SCH-S960L
Not sure if I'm on the same page, but I just flashed the SlimBean rom for the Sprint SIII to my StraightTalk SIII last night and haven't found any issues. Calls, texts, data, etc all are normal.
fordlove said:
Wondering if the new Straight Talk model SCH-S960L was going to be supported in the Samsung Galaxy S3 ToolKit anytime soon? I just purchased. I also have a SPH-L710 on Sprint that worked great. Too afraid to use the same settings on this new SCH-S960L just yet.
Thanks!
Scott
Click to expand...
Click to collapse
befrosty8612 said:
Not sure if I'm on the same page, but I just flashed the SlimBean rom for the Sprint SIII to my StraightTalk SIII last night and haven't found any issues. Calls, texts, data, etc all are normal.
Click to expand...
Click to collapse
What did you use to root it? The Sprint ROMs should work since it is a brother of the sprint model with a few tweeks for strait talk. But with the GS2 from strait talk that was a ATT type phone you still had to use a different recovery to get it to work but you could use any of the ROMs..... so any info on how you flashed Slimbean would be great, thanks
I'm also wondering if the sprint s3 options in the galaxy toolkit are ok to use on sch-s960l...I read that the camera may not function...also I WILL donate to anyone one who can provide step by step, comprehendable instructions to root and flash slim bean with no issues.
Sent from my SCH-S960L using xda app-developers app
mikey98277 said:
What did you use to root it? The Sprint ROMs should work since it is a brother of the sprint model with a few tweeks for strait talk. But with the GS2 from strait talk that was a ATT type phone you still had to use a different recovery to get it to work but you could use any of the ROMs..... so any info on how you flashed Slimbean would be great, thanks
Click to expand...
Click to collapse
This post should work. (QBKing77's video here) All I did was copy SuperUser zip file to the phone, ODIN'd ClockworkMod to the phone, rebooted to CWM, flashed the SuperUser, rebooted and it was rooted. Really not much to it, seemed too easy to me, but it stuck, didn't lose root after reboot.
I did notice some wonky data issues once I flashed SlimBean. My first post was edited to show that it pretty much locked onto whatever tower I was closest to at the time of the flash, so when I was driving around, once I lost connectivity to that tower, I had no data. Still could call but no data. Had to reflash SlimBean to connect to the next tower, but again, lost it since I was still driving around. Back to rooted Stock now.
Lately I've been trying to install CM 10 but they have a check to see if your phone's build.prop file has the SPH-L710 value in it (ro.phonecode or something), and obviously since we don't have sprint phones, ours says SCH-S960L. I edited the build.prop file and put the sprint code in there, but then it said the ro.bootloader value was incorrect. That line isn't even in the StraightTalk's build.prop so I added it, but it still didn't want to flash.
Next step is to edit the ROM itself and remove those checks. Kinda skeptical about that, since they're there for a reason. But, for the sake of research/advancement of mankind, I'm gonna try it anyway.
Does anyone have the stock apn settings i cant send MMS since i flash to a sprint Rom
I am working on a deodexed stock rom for our straightalk s3
Sent from my SPH-L710 using xda premium
Does anyone have the 16 digit password for the s960l?
befrosty8612 said:
This post should work. (QBKing77's video here) All I did was copy SuperUser zip file to the phone, ODIN'd ClockworkMod to the phone, rebooted to CWM, flashed the SuperUser, rebooted and it was rooted. Really not much to it, seemed too easy to me, but it stuck, didn't lose root after reboot.
I did notice some wonky data issues once I flashed SlimBean. My first post was edited to show that it pretty much locked onto whatever tower I was closest to at the time of the flash, so when I was driving around, once I lost connectivity to that tower, I had no data. Still could call but no data. Had to reflash SlimBean to connect to the next tower, but again, lost it since I was still driving around. Back to rooted Stock now.
Lately I've been trying to install CM 10 but they have a check to see if your phone's build.prop file has the SPH-L710 value in it (ro.phonecode or something), and obviously since we don't have sprint phones, ours says SCH-S960L. I edited the build.prop file and put the sprint code in there, but then it said the ro.bootloader value was incorrect. That line isn't even in the StraightTalk's build.prop so I added it, but it still didn't want to flash.
Next step is to edit the ROM itself and remove those checks. Kinda skeptical about that, since they're there for a reason. But, for the sake of research/advancement of mankind, I'm gonna try it anyway.
Click to expand...
Click to collapse
You can edit the assert prop in the updater script of any d2spr rom. I personally use root browser from the rom toolbox from jrummy. Extract the rom, then go to META-INF>com>google>android>updater script. Open the script as an editable text document. You will see the ro.bootloader lines. Simply take out those lines, or modify them for your specific bootloader. If you downloaded the official update when you activated your phone, it will more than likely be S960LWYAMD6. Save it, then simply rezip everything, and flash. That's it. Just remember it's probably not a good idea to try this with any rom that includes bootloader or modem updates. But you SHOULD be fine with anything cyanogen-based. It's worked flawlessly for me but all phones are different, so use cation and always flash at your own risk.... Well, hope this helps some people out there. I've been having this same issue for a while and couldn't find anything that helped, until I got bored one day and just started messing around with random stuff. Haha. Happy flashing
I just need to root this damn phone...
I simply want to root my SCH-S960L. That seems to be way too much to ask on XDA...
Stock Recovery
Hey guys!
Just wondering what my options are for getting the upcoming update to Android 4.3. I have a rooted SCH-S960L on the stock rom with CWM recovery (Touch version) 6.x....I was told that I would need the stock recovery installed in order to install the upcoming 4.3 OTA, but how do I do this? Where can I get the recovery.tar for use w/ODIN to reinstall the stock recovery? If I use KIES to reinstall the factory firmware will this also reinstall the stock recovery? Could I use the Sprint L710 stock recovery.tar since this is essentially the same phone? What should I do?
Anyone with helpful info PLEASE HELP!! THANKS IN ADVANCE!!
^^bump^^
Sent from my SCH-S960L using xda app-developers app
I've read on that Straight Talk doesn't update their phones at all. So what is on it is what will stay on it unless there are custom roms for them. Which I am currently looking for. The topic I read it in mentioned a gingerbread phone that was never updated despite the same phone on other carriers being updated. The ST Customer Service forum had a post saying check their Terms and Conditions(which not sure what that had to do with updating their phone).
https://github.com/Shabbypenguin/an...mmit/b131f82f667433af4d8895d55f00bfc8a2a1c94f
ask your favorite rom devs to add this to their d2spr device trees. it will make it so that there wont be any more need to edit updater scripts, i already sent this info to carbon rom d2spr dev. if/when he merges you guys will be able to use carbon rom without editing anything, just flash in recovery
edit: seems CM will be the first http://review.cyanogenmod.org/#/c/54652/ starting nov 27th you can download sprint d2spr builds and with a sprint based recovery they will flahs just fine for you guys.
Straight Talk does update their phones. The S3 was updated by Straight Talk not long after Sprint updated their S3 to 4.1.2.
Sent from my SCH-S960L using Tapatalk
---------- Post added at 04:58 PM ---------- Previous post was at 04:51 PM ----------
I REALLY NEED SOMEONE TO DO A /system pull and post up the complete factory firmware files for download...full firmware, stock recovery, etc.
If I knew exactly how/what to do I would go buy my wife's phone Friday and do a pull from it and post it up for all who need it.
Sent from my SCH-S960L using Tapatalk
Ummm...not exactly what I wanted to accomplish but I found the backup of my totally stock firmware...stock recovery and the whole nine yards...restored and all is back to Day 1 stock!
Sent from my SCH-S960L using Tapatalk
question
unlimitedsol77 said:
Hey guys!
Just wondering what my options are for getting the upcoming update to Android 4.3. I have a rooted SCH-S960L on the stock rom with CWM recovery (Touch version) 6.x....I was told that I would need the stock recovery installed in order to install the upcoming 4.3 OTA, but how do I do this? Where can I get the recovery.tar for use w/ODIN to reinstall the stock recovery? If I use KIES to reinstall the factory firmware will this also reinstall the stock recovery? Could I use the Sprint L710 stock recovery.tar since this is essentially the same phone? What should I do?
Anyone with helpful info PLEASE HELP!! THANKS IN ADVANCE!!
Click to expand...
Click to collapse
how did you root the sch s960l I have this phone and I want to root it bad. I emailed customer service at straight talk and they told me they would not be updating the phone to 4.3
They also said that the phone woukd be stuck on ICS also...
As for rooting use SKUNKAPE1's guide on here for rooting the Sprint S3. The only addition to his step-by-step is to install STERRICSON's version of BusyBox once you finish up with the TeamEpic root.
Will tell you though that most of the Sprint S3 roms will not be fully functional on this phone however...everything usually works except the cammera/gallery app. Xposed framework mods do work very well however.
Sent from my SCH-S960L using Tapatalk
unlimitedsol77 said:
Ummm...not exactly what I wanted to accomplish but I found the backup of my totally stock firmware...stock recovery and the whole nine yards...restored and all is back to Day 1 stock!
Sent from my SCH-S960L using Tapatalk
Click to expand...
Click to collapse
could you provide the backup? have one semi-bricked and need the official stock firmware
Would be more than glad to! I've tried doing this for others with no luck...how can I get that to you?
Sent from my SCH-S960L using Tapatalk

[Q] Help rooting, galaxy S3 SGH-T999 tmobile

Hello all nooby here a bit paranoid and confused
wanting to rood my T-mobile Samsung Galaxy S3 sgh-t999 version 4.1.2
idk if its international or not it was bought in the US via Tmobile store
I have watched about 4 videos from this site but they all say different things and many of them are unclear
some vids say tmobile rooting but use sprint files to do so another was simply unclear
I found this thread http://forum.xda-developers.com/showthread.php?t=1771687
but I am unsure whether it supports my US bought s3
it also says its image is based off TMO T999UVDMD5 but i have the JZO54K. T999UVDMD5
just need some clarification whether it is ok for me to follow this guide or if I need another image or a diff guide
also to know if I need to take any extra steps
I want a simple root so I can run apps that otherwise I could not
I dont know much about rooting
also a guide on how to unroot would be great and Id be very grateful
Thanks for any help
JokerFrown said:
Hello all nooby here a bit paranoid and confused
wanting to rood my T-mobile Samsung Galaxy S3 sgh-t999 version 4.1.2
idk if its international or not it was bought in the US via Tmobile store
I have watched about 4 videos from this site but they all say different things and many of them are unclear
some vids say tmobile rooting but use sprint files to do so another was simply unclear
I found this thread http://forum.xda-developers.com/showthread.php?t=1771687
but I am unsure whether it supports my US bought s3
it also says its image is based off TMO T999UVDMD5 but i have the JZO54K. T999UVDMD5
just need some clarification whether it is ok for me to follow this guide or if I need another image or a diff guide
also to know if I need to take any extra steps
I want a simple root so I can run apps that otherwise I could not
I dont know much about rooting
also a guide on how to unroot would be great and Id be very grateful
Thanks for any help
Click to expand...
Click to collapse
T-Mobile Image
April 2013 - 4.1.2 JellyBean
Note: This is based off of the stock image TMO T999UVDMD5
Perm Mirror: Download - root66_TMO_T999UVDMD5.7z
Flash that one with Odin.
The best possible thing you can do before doing anything, is to read the sticky threads.
The beginning part of the build is never referred to, so you don't need to worry about it. Just go from where is has T999********.
Stay in this part of the forum. Flashing anything from anywhere but here could cause you problems or a brick.
The thread you linked is imo the best choice for rooting. There are several options, but I like root66 best.
Start with the stickies (yes including forum rules), then search for any questions you still have. I can almost guarantee 90% of any questions you come up with has been covered before.
ALWAYS read the entire OP of anything you want to flash!
Just to get you started though, use the root66 UVDMD5 firmware to root.
This is not the international forum. You are in the right place.
In my signature, you will find just about everything you need to get going.
Good luck and welcome!
Sent from my SGH-T999L using XDA Premium 4 mobile app
Thanks just did it
it worked perfectly
JokerFrown said:
Thanks just did it
it worked perfectly
Click to expand...
Click to collapse
Now that you're rooted, make a backup with whatever recovery you installed(TWRP or CWM).
This will be your backup incase you flash something and your device becomes unstable.
Sent from my SAMSUNG-SGH-T999 using xda app-developers app

[Q] Just recovered from bad encription and need a little help

first of all i was lucky all I had to do was go back and use a root 66 image to recover using odin.
Now i know i will sound like a newb sorry please bear with me if you can.
From the start i was on 4.1.2 on SRx Mod i decided Hay i should encrypt my phone (bad idea i got stuck in a boot loop) so after searching for how to fix it i was told to use the unbrick then i wad told to use route 66 i choose route 66. I have since successfully flashed rooted 4.1.2 but i have a few questions.
First route 66 lets you choose which recovery you wish to use. now to install a recovery (my first root it came with CWM) Should i just download the app and install CWM with rom recovery or use Goo manager to install TWRP? or should i use odin to flash it? if i should flash it where should i get the correct files?
Second.
Say I would like to update to 4.3 and take advantage of roms again. What is the safest way to go about this. Depending on rls I have been able to update via recovery and a new rom and i have had to use odin. I believe (not sure) safest way to go from a major rls to another it should be done with odin. Like going from ICS to JB so should I use odin again to root to 4.3?
So to shorten my question
How do i install recovery on a freshly rooted (re rooted via route 66) Also i am currently runnning 4.12 to update to 4.3 do i need to use odin and a 4.3 image to be safe? or can i install a 4.3 rom and it will update.
In all now that my phone is working I am weary of just trying and want to do it the correct way and now i know trying to use encryption is dumb!
THANKS in ADVANCE i appreciate your help.
When it comes to Recoveries, choos if you want CWM or TWRP. Both are good. Based on that get either Rom Manager app for CWM or Goo Manager for TWRP. Let the app install the recovery for you.
If you want 4.3, then look for Stock Mod Rom in Android Development section. Flash that rom via CWM/TWRP. Make sure to follow the instructions in the Rom's thread. Particularly the part where it wants you to flash ATT insecure kernel. The Rom is Rooted. Do not flash 4.3 via Odin.
Thanks for the refresher
I have been away for a little while and i wanted to make sure. SO to get it straight
Right now I just got back from boot loop with route 66 via odin.
To go on i simply get CWM or TWRP with the respective program (rom manager or goo manager)
Then get the 4.3 rom from the rout66 thread and update to 4.3 via recovery.
If not which rom do i use.
Edit:
Ok now i think i understand your post you directed me to use a specific rom
http://forum.xda-developers.com/showthread.php?t=2501303
So from base 4.1.2 i can update to any 4.3 rom i choose? I just want to make sure as most major releases have some issues at the beginning maybe everything is sorted and their is no problems,
One thing i want to ask is can i choose another rom as sometimes i like to switch to and from touchwiz
So i guess my question now is once i install a recovery program of my choice (i always used CWM so ill probably stick with that)
Can I install any rom no problem? as far as changing versions only go up to 4.3 dont go back down with a recovery flash?
SO AFAIK right now that everything is all good and i wont mess my phone up again when loading a rom.
Is their anything i SHOULD NOT do, Beyond common sense i know not to flash a rom for another phone ETC
I appreciate your help I haven't been following the development for a couple months So i am Rusty also its been a while since i had to start from scratch with odin and at that time we did not have the GREAT list of Official Images so I got a rooted rom that had CWM already installed. I want to get to how i was before when i was enjoying the work of the devs and loving it. being in stock reminds me of how much work the devs do YOU GUYS ARE GREAT (if any even read this thread)
BeatnikBandit said:
Thanks for the refresher
I have been away for a little while and i wanted to make sure. SO to get it straight
Right now I just got back from boot loop with route 66 via odin.
To go on i simply get CWM or TWRP with the respective program (rom manager or goo manager)
Then get the 4.3 rom from the rout66 thread and update to 4.3 via recovery.
If not which rom do i use.
Click to expand...
Click to collapse
Do not do the Red Striked part. Search for Stock Mod Rom by @saranhai
Thank you to be safe i will use the ROM you suggested although this is the only thing that worries me as i never have or really want to flash modems
YOU MUST FLASH THE T999UVUEMJ4 MODEM OR T999UVUEMJC MODEM FOR T-MOBILE GALAXY S III IN ORDER FOR DATA TO WORK; OTHERWISE YOU WILL NOT HAVE DATA
AS USUAL, I'M NOT RESPONSIBLE FOR WHAT HAPPENS TO YOUR DEVICE! ONE WRONG MOVE (Especially with the Modem) AND YOU COULD END UP WITH A VERY EXPENSIVE BRICK. PROCEED AT OWN RISK.
Click to expand...
Click to collapse
This is from the page for the
[ROM][3.9.14] .::StockMOD ROM::. | TouchWiz 4.3 | Galaxy S5 | UVUEMJC | RLS2
http://forum.xda-developers.com/showthread.php?t=2501303
I hope this is the ROM you are talking about and if so what do i do about the modem issue as I am coming from 4.1.2 IDK if i have the correct modem installed. All i have right now is Route 66 rooted 4.1.2 and CWM recovery I also created a Nandroid as soon as i got recovery so i can ave a pretty clean android to go back to if anything happens.
I am sorry i may be annoyed if i were you possibly so i hope you are hanging in there with me i really appreciate it once i do this ill be back in the game and wont need any more help. I just need to get this part sorted, THANK YOU
So other than the modem thing I think i got it, i just hope i dont have to mess with the modem IDK if I'm ready to try something that could hard brick my phone after just recovering it
Flashing the modem won't brick it. It's the exact same procedure as flashing the kernel, and the risk level is pretty much the same. As long as your device is the T999, you don't have anything to worry about. Just check the md5 on the download to make sure its not a corrupted/bad download. Even if you flash the T999L/T999V/I535 modem, it shouldn't brick. It just wouldn't get signal till you flash the correct one again. Many, many people have flashed the modems with no problems at all.
Sent from my SM-N900T using Tapatalk
THANKS DOC
I really didnt think you would answer my post!
Anyway so even though the warning says i can brick it with a modem change really all that will happen is that i will just not get Data until i install the correct one got it.
And unless anyone posts otherwise The first 4.3 rom i should install is Stock Mod Rom by @saranhai and also flash the modem T999UVUEMJC via recovery?
I tried the modem map but i had no success with getting to to work, first it said the link was not supported and i needed to revert to GMaps Classic so i did but i got the same results. Random places all over the world (some in the sea) some said city and modem some were simply city's so i think its out of date so i suppose that the worst that can happen is that i get no data i suppose i can try the other modem listed on the roms page?
If someone knows (as their are two maybe its east west cost or something of the like i live in southern California south of la but furthest from the border of Mexico in San Diego so north San Diego county but anyone that knows the area may know of the massive military base i live south east of Camp Pendleton
(off topic but if a war comes to our shores i pray i am dead already or something divine as i live very close to a large Marine Training base and camp/base in General and right next to it (on the coast) is a dual Nuclear Reactor Power plant and one reactor has been malfunctioning and AFAIK its just being maintained to keep anything catastrophic from happening (which i believe IDK for sure was the reason why it is still running but not producing power)
BeatnikBandit said:
THANKS DOC
I really didnt think you would answer my post!
Click to expand...
Click to collapse
No problem! If I am able and have something to add...
Anyway so even though the warning says i can brick it with a modem change really all that will happen is that i will just not get Data until i install the correct one got it.
Click to expand...
Click to collapse
Many people warn about that because on many devices it is true. just like a kernel or recovery though, if you flash the wrong thing to its partition, it can brick. I.e. If you flash a recovery to the modems partition.
A lot of times people bring habits from their old devices. In our case, while it is possible, it's highly unlikely you'd brick flashing the modem. We know it's not going to flash the wrong item/partition. Several people have tried flashing the I535, T999L, T999N modems and all that happened was they got no working signal. Flashed back to the correct modem and all was good again.
And unless anyone posts otherwise The first 4.3 rom i should install is Stock Mod Rom by @saranhai and also flash the modem T999UVUEMJC via recovery?
Click to expand...
Click to collapse
This would be my recommendation, yes. Just follow instructions in the OP.
I tried the modem map but i had no success with getting to to work, first it said the link was not supported and i needed to revert to GMaps Classic so i did but i got the same results. Random places all over the world (some in the sea) some said city and modem some were simply city's so i think its out of date so i suppose that the worst that can happen is that i get no data i suppose i can try the other modem listed on the roms page?
Click to expand...
Click to collapse
The map is definitely screwed up and I apologize for that! I meant to start a new one a while back but just never got around to it. Still on my to do list!
Good Luck!
Sent from my SM-N900T using Tapatalk
Well thank you guys both I appreciate you gave me the correct info fast Perseus71 and thank you for clarifying DocHoliday77 And an extra thank you for all the work you do for the S III community!
i was just about to do this althoug i downloaded the rom and the modem but now what about the "insecure Kernal" I dont want to mess my phone up again sorry for all the questions its just after you mess up your phone when yoyu come back to roms and its just like getting a traffic ticket for a little bit you drive like you just got a ticket REALLY SAFE with no nerve so sorry but thats my mindset i just messed up my phone and dont want to do it again (i just finished paying for it too so i donk want to break my just paid off 600 dollar car lol.
so yeah AFAIK the post sys all i need is the modem but do i need the kernal too as it may not be listed as it is know its needed at one point when updating versions?
THANKS AND SORRY this is probably the last thing i need as i was just about to flash but just got worried
If wifi doesnt turn on, then try the kernel. If everything boots and runs as you like, then its up to you.
Sent from my SM-N900T using Tapatalk

Stuck on Samsung boot screen

I rooted my old milestone many years ago but havee been keeping my devices stock ever since, until today that is. Today I decided I wanted to try to root my Samsung SGH-I747M with Telus and everything seemed to start off smoothly. Once installed the SuperSU stopped working. I tried fixs I had read online such as updating the app, but this did not work. I read on a forum that you could flash something to disable know to help fix the problem. When I tried going this avenue I was not able to reboot my phone. I tried restoring from a backup taken before flashing, but I havent done any of this in so long im not entirely sure the backup took properly. At one point I got a message saying no OS was installed but after restoring this seemed to go away. I apparently do not remember anything about rooting from my milestone and am hoping someone may be able to help me get out of this mess. I am currently downloading the stock firmware and I think I will try flashing it tomorrow. I also was hoping someone could point me in the direction of a thread on xda that went into a more detailed explanation of how rooting works, what specifically roms and flashing all is and does. Any help is greatly appreciated.
cdriver said:
I rooted my old milestone many years ago but havee been keeping my devices stock ever since, until today that is. Today I decided I wanted to try to root my Samsung SGH-I747M with Telus and everything seemed to start off smoothly. Once installed the SuperSU stopped working. I tried fixs I had read online such as updating the app, but this did not work. I read on a forum that you could flash something to disable know to help fix the problem. When I tried going this avenue I was not able to reboot my phone. I tried restoring from a backup taken before flashing, but I havent done any of this in so long im not entirely sure the backup took properly. At one point I got a message saying no OS was installed but after restoring this seemed to go away. I apparently do not remember anything about rooting from my milestone and am hoping someone may be able to help me get out of this mess. I am currently downloading the stock firmware and I think I will try flashing it tomorrow. I also was hoping someone could point me in the direction of a thread on xda that went into a more detailed explanation of how rooting works, what specifically roms and flashing all is and does. Any help is greatly appreciated.
Click to expand...
Click to collapse
General section is most likely the best place for that.
Here's a How-to that should get you started: http://forum.xda-developers.com/showthread.php?t=2538991
And here is the Sticky index: http://forum.xda-developers.com/showthread.php?t=1725839 Lots of good guides and info in there!
General section is most likely the best place for that.
Click to expand...
Click to collapse
The Only problem is I already attempted to follow this and my phone will no longer boot up. Also I tried navigating through the stickies. couldn't find much info for my device. I will be trying to flash the stock firmware tonight but I want to have a clear understanding on what flashing is and what the difference is between os firmware kernel and rom and such BEFORE flashing this firmware tonight. I hope someone will be able to help.
cdriver said:
The Only problem is I already attempted to follow this and my phone will no longer boot up. Also I tried navigating through the stickies. couldn't find much info for my device. I will be trying to flash the stock firmware tonight but I want to have a clear understanding on what flashing is and what the difference is between os firmware kernel and rom and such BEFORE flashing this firmware tonight. I hope someone will be able to help.
Click to expand...
Click to collapse
Well that info is already in the Sticky Index. Understanding what you're doing (or about to do) is really important but you gotta start reading, it's all there.
OS, firmware and ROM are the same thing.
When your phone boots, it basically goes: Bootloaders -> Kernel -> ROM (OS).
The kernel has pretty much all the "underground" controls (RAM, Mhz, governor, scheduler, BT, Wifi, etc).
I won't write everything but those are the basics.
Also, having a Canadian variant of the S3 (that's what the M is for), doesn't change much other than flashing bootloaders and stock ROM (which you'll wanna use the Canadian variant bootloaders and Telus ROM for stock). Everything else is basically the same.
Also, having a Canadian variant of the S3 (that's what the M is for), doesn't change much other than flashing bootloaders and stock ROM (which you'll wanna use the Canadian variant bootloaders and Telus ROM for stock). Everything else is basically the same.
Click to expand...
Click to collapse
Sweet I will definitely check that out. So I did flash twrp to my phone. Is it possible that I flashed the version say for the i747 but not the m version and that is why the phone wont move past the samsung screen? Also should I attempt to get rid of twrp before flashing the stock firmware. This should answer all my questions and then I will explore the stickies some more.
cdriver said:
Sweet I will definitely check that out. So I did flash twrp to my phone. Is it possible that I flashed the version say for the i747 but not the m version and that is why the phone wont move past the samsung screen? Also should I attempt to get rid of twrp before flashing the stock firmware. This should answer all my questions and then I will explore the stickies some more.
Click to expand...
Click to collapse
If flashing a stock ROM, flash the Telus one. If flashing a custom ROM, it doesn't matter (I747 or M variant), as long as it's D2LTE.
Your recovery doesn't change anything to flashing with Odin, it will overwrite it.
Flashing the stock firmware fixed my problems. Thanks for all of your help and I will definitely be checking out the links that you sent me before trying to root again tomorrow.

Categories

Resources