Hi All,
I am running the January 19th AOKP build on my HTC One V. I was able to get the phone to pair with my TSX and can dial out. The problem is that I can't hear anyone after I dial. I was reading it had to do something with the kernel so I flashed the latest version SickleSoftware-01_21_13-1546supersick but it didn't help. Is the issue with the kernel or the ROM? Any help would be appreciated.
Thanks
Would this be a problem with the boot loader (Super Sick) or the actual ROM iteself?
npolite said:
Would this be a problem with the boot loader (Super Sick) or the actual ROM iteself?
Click to expand...
Click to collapse
Just try!
I recommend the HELLBOY kernel. works fine for me.
I'm not sure the HELLBOY kernel works with AOKP.
As i said, just try!
maikvitesse said:
Just try!
I recommend the HELLBOY kernel. works fine for me.
I'm not sure the HELLBOY kernel works with AOKP.
As i said, just try!
Click to expand...
Click to collapse
Is HELLBOY available for the Primo C? Sorry I didn't mention that.
OK I think the issue lies in the CM 10 build.
I have installed every ROM I can find for the CDMA One V with no luck. I just can't hear anything else through my Handsfree Bluetooth. I tried both SuperSick and JMZ with no luck.
I then went and tried X3reme sense with the 3.0.30 JMZ PrimoC+ and that works with my car.
Is there any way I can change the dialer from the stock to what HTC uses? Maybe I can give that a try.
So I also tried the Stock ICS for the One located here and Bluetooth works in my car (I only have phone not music in my TSX). So I guess I'll need to wait for HTC to bring out the Bluetooth version for JB and try that.
http://forum.xda-developers.com/showthread.php?t=2073880
This rom is a little on the lag but I can live with it. Hopefully that doesn't mean the CPU is being pegged and draining the battery.
So the same issue looks to be in 4.2 as well. So this might be above what I can handle. Is there a way I can compare something from the Bluetooth module in x3remeSense010213_signed and Vanilla ICS v2.1 which is running 4.0 and compare it to a 4.2 ROM?
I can pair and the connection is established from my car and the phone, I just can't hear anything with any 4.1 or 4.2 build.
Related
ive been away for a while i didnt know if there was a ics sense 4.0 rom that has working headphone controls ive tryed a fue but non seemed to work for me , or is there a patch file to get this working thx
A simple answer: no.
It seems to be a kernel issue, so wait patiently or be a chef
ViperDHD has volume media control, so you can use it, instead of headset
But no Volume wake^^
no..no rom
Waiting...
Yes we can
maddog486 said:
ive been away for a while i didnt know if there was a ics sense 4.0 rom that has working headphone controls ive tryed a fue but non seemed to work for me , or is there a patch file to get this working thx
Click to expand...
Click to collapse
Hi guy,
now headphone work fine on Sabsa Prime with new Kernel Beastmode (here ) or if you want tou should flash a new Viper Rom 1.2.2.
Have a good flash
Hi Everyone,
Long time listener, first time caller.
Over the last couple of months, I have tried virtually every ROM I can get my hands on for my DHD, and I always do a full wipe (format) of /system, /data, /cache, Dalvik, and .android_secure before install.
The only ICS ROM I can get working fully is Blackout, but it is Sense 3.6.
I have tried Viper, and *really* like it, but Bluetooth is broken (in 1.2.0, .1, .2, and .3)
That seems to be the case for me with Sense 4 ROMs (lite or full); if Bluetooth works, then WiFi is broken. If WiFi works, then Bluetooth is broken.
ROMs I've tried (latest):
Viper
Miui
Jellytime
ARHD
Blackout (S3.6, which is where I'm at b/c it works)
IceCold
IceSense
CosmicSandwich
Sabsa
codefireX
Kernels I've tried (various releases up to latest):
Beastmode
KangBang
Virtuous
So, I'd like to know if there is such a thing as a fully-working ICS/JB ROM with Sense 4? I cant seem to find one. W/o Bluetooth and WiFi, nothing can be considered a "daily driver", imo... especially w/o Bluetooth, if you know what I mean.
Thanks!
I'm baffled; all of those ROMs should have both BT and wifi fully working. What's your recovery and version?
EDIT: and what's your radio?
coolhands said:
Hi Everyone,
Long time listener, first time caller.
Over the last couple of months, I have tried virtually every ROM I can get my hands on for my DHD, and I always do a full wipe (format) of /system, /data, /cache, Dalvik, and .android_secure before install.
The only ICS ROM I can get working fully is Blackout, but it is Sense 3.6.
I have tried Viper, and *really* like it, but Bluetooth is broken (in 1.2.0, .1, .2, and .3)
That seems to be the case for me with Sense 4 ROMs (lite or full); if Bluetooth works, then WiFi is broken. If WiFi works, then Bluetooth is broken.
ROMs I've tried (latest):
Viper
Miui
Jellytime
ARHD
Blackout (S3.6, which is where I'm at b/c it works)
IceCold
IceSense
CosmicSandwich
Sabsa
codefireX
Kernels I've tried (various releases up to latest):
Beastmode
KangBang
Virtuous
So, I'd like to know if there is such a thing as a fully-working ICS/JB ROM with Sense 4? I cant seem to find one. W/o Bluetooth and WiFi, nothing can be considered a "daily driver", imo... especially w/o Bluetooth, if you know what I mean.
Thanks!
Click to expand...
Click to collapse
bananagranola said:
I'm baffled; all of those ROMs should have both BT and wifi fully working. What's your recovery and version?
EDIT: and what's your radio?
Click to expand...
Click to collapse
Same here, bluetooth is one of the few things that ALWAYS work (except for 4.2.1, but that's expected).
Are you wipping between flashes ?
Thanks for the replies, guys.
As I outlined above, yes, I am fully wiping b/t ROM installs - even restores - please see my method in first post.
I am using ClockworkMod Recovery (HBoot for booting) and have paid for ROM Manager, which entitles me to further updates to CWM than what is available on Play. I currently have 5.8.1.5 installed (CWM Touch).
The radio varies from ROM to ROM it seems, and I should have documented which version in each ROM, but right now, in Blackout, it is reporting 12.56.60.25P_26.10.04.03_M. <--- That number stays consistent, afaik, but the first letter will change (U and T, iirc).
When I say that Bluetooth doesnt work, specifically what happens is that it either doesnt pair with any device, or if it does pair, no sound will be transmitted or the pairing will only last for a second, maybe two seconds at most.
Deleted.
Sent from a dream.
The radio shouldn't be changing with each ROM unless you change it. But with that said, nothing seems out of the ordinary. You could try reflashing your radio manually? Other than that I'm out of ideas.
bananagranola said:
The radio shouldn't be changing with each ROM unless you change it. But with that said, nothing seems out of the ordinary. You could try reflashing your radio manually? Other than that I'm out of ideas.
Click to expand...
Click to collapse
I dont know much about that, but with that said, I just re-flashed Viper 1.2.3 and my radio now reads:
12.56.60.25U_26.10.04.03_M, which is different than it was above with Blackout.
I have not tried re-flashing my radio manually. I wouldnt know which one would give me a better chance of success...
bananagranola said:
The radio shouldn't be changing with each ROM unless you change it. But with that said, nothing seems out of the ordinary. You could try reflashing your radio manually? Other than that I'm out of ideas.
Click to expand...
Click to collapse
Once I flash a new ROM, the kernel and the radio are the same I had or the new ROM comes with its own kernel and radio?
Thanks in advance
roms do not come with radios tho they do have their own kernels. Radios are region based not rom based so there is no rom specific radio just what works best in your area.
Sent from my Desire HD using xda premium
Reinaldo33897 said:
roms do not come with radios tho they do have their own kernels. Radios are region based not rom based so there is no rom specific radio just what works best in your area.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Thanks for the explanation. So, if I bought my mobile in Spain, the radio is different if I had bought, for example in France?
depends on how close they are to each other whether same service is used in Spain as in France or if they are totally two different service. I would Google the carrier you use then see what radio they shipped with. Even in the radio thread you may find an answer to which radio is good for you in the area your at.
Sent from my Desire HD using xda premium
Reinaldo33897 said:
depends on how close they are to each other whether same service is used in Spain as in France or if they are totally two different service. I would Google the carrier you use then see what radio they shipped with. Even in the radio thread you may find an answer to which radio is good for you in the area your at.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Thanks a lot. I gonna do what you have said
you have tried almost every rom except for the ( pacman rom v18 ) its a jelly bean 4.1.2 based rom , i am stuck with it , every thing is working perfectly ( wifi , bluetooth , camera .... etc )
with some common tweaks i get an excellent battery life ,its even better than it was in the stock gingerbread rom ...
by the way , its non-sense rom
ghassan haddad said:
you have tried almost every rom except for the ( pacman rom v18 ) its a jelly bean 4.1.2 based rom , i am stuck with it , every thing is working perfectly ( wifi , bluetooth , camera .... etc )
with some common tweaks i get an excellent battery life ,its even better than it was in the stock gingerbread rom ...
by the way , its non-sense rom
Click to expand...
Click to collapse
I'll try it. Thanks.
What are the "common tweaks" for battery life?
coolhands said:
I'll try it. Thanks.
What are the "common tweaks" for battery life?
Click to expand...
Click to collapse
Visit Following link
http://forum.xda-developers.com/showthread.php?t=1189755
Hey guys, I try to do my research before posting (this is my first post) but I am stuck on this one.
I have:
PrimoU
Llior's CM9 Rom
Titanium Kiss kernel (ICS)
on Koodo (Canadian Provider)
Problem:
I was running the latest Hellboy kernel, but noticed I had better GPS signal with KISS, so I flashed back to KISS to see if It improved the GPS. It did, but now I have no service! I tried restoring to my last Nandroid, but still have the same problem.
WiFi works, but I have no cellular network connection. This is my daily use device so I would love to get some help on this one if anyone has some ideas. For now I am stuck texting on my old optimus one.
Confused!
Thanks in advance!
islandalpinist said:
Hey guys, I try to do my research before posting (this is my first post) but I am stuck on this one.
I have:
PrimoU
Llior's CM9 Rom
Titanium Kiss kernel (ICS)
on Koodo (Canadian Provider)
Problem:
I was running the latest Hellboy kernel, but noticed I had better GPS signal with KISS, so I flashed back to KISS to see if It improved the GPS. It did, but now I have no service! I tried restoring to my last Nandroid, but still have the same problem.
WiFi works, but I have no cellular network connection. This is my daily use device so I would love to get some help on this one if anyone has some ideas. For now I am stuck texting on my old optimus one.
Confused!
Thanks in advance!
Click to expand...
Click to collapse
Well, like it's on: http://forum.xda-developers.com/showthread.php?t=1757323 for CM9, DONT FLASH THE BOOT.IMG INSIDE THE ZIP, and later, use Maxwen... - and that's a http://forum.xda-developers.com/showthread.php?t=1954967
Also, on the thread: http://forum.xda-developers.com/showthread.php?t=1765687, it is almost in the first row: IMPORTANT for CM users
If you want to use CM or a CM based ROM choose the correct kernel! CM9 needs a different ramdisk."
On DL web page: http://www.mediafire.com/?lo2ctaplonbdh you'll see a lot of kernels for CM9 - it's not always the latest on that will work with your phone. Try them...
Just courious - why are you on CM9?
I made sure not to flash the boot.img from inside the zip and always ensured I used a CM9 kernel which I flashed before installing a rom. I ran CM9 with the KISS kernel originally as it was what was recommended at the time. Upgraded to HELLBOY to try out new kernel features but reverted to see if the GPS worked any differently. (Tangent: It SEEMED to be better with KISS, but i could be wrong...)
I like CM9 for the stability and less glitchy video/pano modes, which I use often.
I have since gone back to square one.
Tried CM10 with CM10 hellboy. No signal
Tried CM9 with CM9 hellboy. No Signal.
I'm at a loss as to what could be the problem...
bratusm said:
Well, like it's on: http://forum.xda-developers.com/showthread.php?t=1757323 for CM9, DONT FLASH THE BOOT.IMG INSIDE THE ZIP, and later, use Maxwen... - and that's a http://forum.xda-developers.com/showthread.php?t=1954967
Also, on the thread: http://forum.xda-developers.com/showthread.php?t=1765687, it is almost in the first row: IMPORTANT for CM users
If you want to use CM or a CM based ROM choose the correct kernel! CM9 needs a different ramdisk."
On DL web page: http://www.mediafire.com/?lo2ctaplonbdh you'll see a lot of kernels for CM9 - it's not always the latest on that will work with your phone. Try them...
Just courious - why are you on CM9?
Click to expand...
Click to collapse
I don't know to much about other carriers, but does your phone require a sim?
Yes. It requires a sim.
Tried the sim in my old p500. Sim card works.
Power off the phone and remove the sim for some time(10~15mins).
It always works for me
Or,there may be a problem in the sim slot.
Sent from my One V using xda app-developers app
Thanks. Tried that, but no luck.
There is no way I could have messed with the radio or baseband by flashing a kernel, is there?
mihirengg19 said:
Power off the phone and remove the sim for some time(10~15mins).
It always works for me
Or,there may be a problem in the sim slot.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
No,it will not mess with radio and baseband.
Sent from my One V using xda app-developers app
islandalpinist said:
I made sure not to flash the boot.img from inside the zip and always ensured I used a CM9 kernel which I flashed before installing a rom. I ran CM9 with the KISS kernel originally as it was what was recommended at the time. Upgraded to HELLBOY to try out new kernel features but reverted to see if the GPS worked any differently. (Tangent: It SEEMED to be better with KISS, but i could be wrong...)
I like CM9 for the stability and less glitchy video/pano modes, which I use often.
I have since gone back to square one.
Tried CM10 with CM10 hellboy. No signal
Tried CM9 with CM9 hellboy. No Signal.
I'm at a loss as to what could be the problem...
Click to expand...
Click to collapse
One more thing that you can try:
- flash stock rom
If you don't have signal with stock rom, might be hardware failure. If you still have warranty, just go and replace it...
Hey
Im having a lot of problems with wifi on .18, I have even used the latest kernels xm and kk to and my wifi still goes wierd, it says there are networks available even when its connecting to the current wifi. Any help?
Thanks
Faisal
Flash a 3.14 rom......
faisaldante said:
Hey
Im having a lot of problems with wifi on .18, I have even used the latest kernels xm and kk to and my wifi still goes wierd, it says there are networks available even when its connecting to the current wifi. Any help?
Thanks
Faisal
Click to expand...
Click to collapse
Im sure there workin on the fix as we speak. The best bet is to install the latest xm kernel with the wifi fix or head over to kozmic for his wifi fix. it helped me tons. better then it use to be.
Dizy801 said:
Im sure there workin on the fix as we speak. The best bet is to install the latest xm kernel with the wifi fix or head over to kozmic for his wifi fix. it helped me tons. better then it use to be.
Click to expand...
Click to collapse
Like the problem, which doesn't occur at every phone, the fix doesn't work at all affected phones, too.
My bet is to wait for HTC to issue the fix. There is one concern, though - we might be waiting few months for that to happen (along with Sense 5 :laugh.
Until then, 3.14 works just as good!
EDIT: did you even read the whole post? He said that he tried latest XM and KK, but it didn't work.
I think I just will go back to 3.14 rom but I Loved the smoothness of 3.18 thats all it was pretty awesome ah welllll.
Thats true, Stick with a 3.14 base for now until a permanent fix is available
mw600 bluetooth headset is not being recognised by latest 3.4 kernel and latest build or either with the 3.0 kernel. i dont know what is the problem. when i connect it with older build and kernel 2.6 it shows connect but still music plays from phone speaker instead of the earphones of headset. please help me anyone about this issue
i tried it with the latest build by shufking and even with the lastest last 2.6 build but all same
darkevilmagic said:
mw600 bluetooth headset is not being recognised by latest 3.4 kernel and latest build or either with the 3.0 kernel. i dont know what is the problem. when i connect it with older build and kernel 2.6 it shows connect but still music plays from phone speaker instead of the earphones of headset. please help me anyone about this issue
i tried it with the latest build by shufking and even with the lastest last 2.6 build but all same
Click to expand...
Click to collapse
3.4 has issues with Bluetooth, from what I have heard.
But with 3.0 it works fine.
nope it isnt working that way too.
will you tell me ur steps to get it working
darkevilmagic said:
nope it isnt working that way too.
will you tell me ur steps to get it working
Click to expand...
Click to collapse
Just connect MW600 with your phone, like you did it the first time.
It worked all good for me, did not do anything special.
which rom u using..??? 4.2.2 or 4.1.2?
darkevilmagic said:
which rom u using..??? 4.2.2 or 4.1.2?
Click to expand...
Click to collapse
I was using 3.0 kernel with FXP218 I believe of CyanogenMod 10, which is 4.1.2.
Will try out 3.4 kernel with CM10 or CM10.1, not sure which one.
i tried
with 4.1.2 with even kernel 3.4 it works but 4.2.2 have issues
Known issue of 4.2.2 with any kernel
Bluetooth does not work properly.
The recent test versions i used, bluetooth file transfer was only working. Nothing else
You can check your ROM thread to be sure.