im still getting wifi connected notice after updated to 6.2...anyone else having this issue
britdude said:
im still getting wifi connected notice after updated to 6.2...anyone else having this issue
Click to expand...
Click to collapse
Did you factory reset, wipe data, wipe cache, wipe dalvic cache at least 3x each before flashing? I have not had a problem with any of seans roms watsoever......maybe make sure u have the recent recovery?
Sent from my Galaxy Note 2 running SkyNote5.0.1
re: skynote 6.2
jyazzie110 said:
Did you factory reset, wipe data, wipe cache, wipe dalvic cache at least 3x each before flashing? I have not had a problem with any of seans roms watsoever......maybe make sure u have the recent recovery?
Sent from my Galaxy Note 2 running SkyNote5.0.1
Click to expand...
Click to collapse
I just started from a fresh , wiped 3x all 3 ..and started with base 6.0 then update 6.1 then update 6.2........
no mods or anything, not even an account added...
i still get the connected to wi-fi network coming up..
its no biggie but just curious as to what i may be doing wrong as i have had no probs myself with skynote till this..
the battery charged has stopped coming up so that sure worked..
*Thx for all replies...going to look into it again when i get home.....would wiping internal storage do anything to help..i have been on 4.2 and back on 4.1 *
britdude said:
im still getting wifi connected notice after updated to 6.2...anyone else having this issue
Click to expand...
Click to collapse
I would re download ROM and mods again. I'm now on 6.2 and no wifi notification notice.
Or it may be a modification causing it. I'm using 75% transparency, blue theme, and circle blue battery.
Sent from my SAMSUNG-SGH-I317 using xda premium
Maybe if you're doing a tibu restore there is something being restored from a previous backup.
Currently I'm running 6.2 (flashed 6 base then when .2 came out I only wiped caches and flashed)
Mods: new green circle battery, light saber s pen sounds.
Check the mods you have on your sd card maybe one of them are dated prior to the files that are on Sean's goo.im the naming could be throwing you off because I know that some of the mods are labeled as V3 but have been updated more than 2-3 times without actually changing the version number.
~PsyCl0ne
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
martinezma99 said:
I would re download ROM and mods again. I'm now on 6.2 and no wifi notification notice.
Or it may be a modification causing it. I'm using 75% transparency, blue theme, and circle blue battery.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
jyazzie110 said:
Did you factory reset, wipe data, wipe cache, wipe dalvic cache at least 3x each before flashing? I have not had a problem with any of seans roms watsoever......maybe make sure u have the recent recovery?
Sent from my Galaxy Note 2 running SkyNote5.0.1
Click to expand...
Click to collapse
Update.......ok, i have cleaned my internal storage( as all my needed stuff on external)....i redownloaded 6.0 and update 6.2...
i wiped cache and system 3 times each,and installed base 6.0 with 6.2 update in same procedure.....
no other mods and none of my original apps restored..i have a basic system with just skynote 6.0 and 6.2 update on....but sadly still get the wifi connected message coming up ...
i must be doing something wrong..but what..lol..
any ideas??
Is it possible to get the AOSP 4.2 messaging / MMS with skynote ROM? They currently have a flash for AOSP version but it's missing the group messaging that is in the latest 4.2 version. This would eliminate the requirement for a third party app to use group messaging.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Related
If you want to use the 4.0.4 Gapps (which work 100% and include the new Camera and Browser) you will need to do a data wipe.
Here are the 4.0.4 Gapps.. These Gapps should work with any 4.0.3 ROM.. Although if you are installing them for the first time you will need to do a data wipe.. So while your at it and wiping data why not go ahead and try out the new GummyNex;-)
Enjoy
Files
4.0.4 Gapps 020512 - Requires a data wipe if this is the first time you are installing these
Md5Sum - 042f8395d32af4660f70ddd1764f416f
Add-ons:
None ATM
Updates / Fixes:
None ATM
Donate:
Kejar31 donate
This is sooooo tempting, but too far from home to try it...will do it first thing.
Sent from my Galaxy Nexus using xda premium
Flashed on RootzBoat and everything appears to be working perfectly fine. Thanks for these Kejar.
Sent from my Galaxy Nexus using Tapatalk
mbh87 said:
Flashed on RootzBoat and everything appears to be working perfectly fine. Thanks for these Kejar.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Did you wipe data?
Sent from my Galaxy Nexus using xda premium
dp92180 said:
Did you wipe data?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yup.
Sent from my Galaxy Nexus using Tapatalk
Any pictures of the browser and camera?
Sent from my Galaxy Nexus using XDA App
Wiping data then flashing gapps causes bootloops. Had to battery pull and flash nandroid. AOKP & faux's #12.
Sent from my Galaxy Nexus
I think he means you have to wipe then install rom then install gapps. Like you normally would when flashing.
Sent from my Galaxy Nexus using XDA App
Can you tell us why we must wipe data? I'm just curious. Are there certain folders we can wipe to not have to do a whole device re-do?
Hilbe said:
Can you tell us why we must wipe data? I'm just curious. Are there certain folders we can wipe to not have to do a whole device re-do?
Click to expand...
Click to collapse
Simple why: Because some apps will be unstable if you don't.
Real reason why: Some apps probably changed their data format a bit, making them incompatible with data from the older version.
In theory, you can go into app management and delete data for these apps, but there are almost 40 of them in this update. Sounds a bit dangerous.
scoppola said:
Simple why: Because some apps will be unstable if you don't.
Real reason why: Some apps probably changed their data format a bit, making them incompatible with data from the older version.
In theory, you can go into app management and delete data for these apps, but there are almost 40 of them in this update. Sounds a bit dangerous.
Click to expand...
Click to collapse
That was a really good explanation. Thank you for that.
scoppola said:
Simple why: Because some apps will be unstable if you don't.
Real reason why: Some apps probably changed their data format a bit, making them incompatible with data from the older version.
In theory, you can go into app management and delete data for these apps, but there are almost 40 of them in this update. Sounds a bit dangerous.
Click to expand...
Click to collapse
Any chance we could get a list? Or better yet a CWM flash-able zip that wipes the data on those apps
There's no guarentee that would even work, better (safer) to just tibu and flash the rom you're currently on imho if you want nothing to change.
You def need to wipe, I tried for the hell of it without wiping just flashed a rom and cleared dalvik and cache. Nothing worked from Google except maps, so ima wipe later and do it right. Maybe even the blue will come back to my signal and 3g and 4g instead of being grey all the time.
~ Sent from my Gnexus running Cm9~
Has anyone who's currently running Gummy with 4.03 apps had success flashing over? Or did that also require data wipe, reflash ROM, flash 4.04 apps?
Sent from my Galaxy Nexus using Tapatalk
mldiroff said:
Has anyone who's currently running Gummy with 4.03 apps had success flashing over? Or did that also require data wipe, reflash ROM, flash 4.04 apps?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
You have to wipe no matter what rom your on bc of the old data it has to replace overwriting won't work. Gotta start fresh.
~ Sent from my Gnexus running Cm9~
sway40 said:
You have to wipe no matter what rom your on bc of the old data it has to replace overriding won't work. Gotta start fresh.
~ Sent from my Gnexus running Cm9~
Click to expand...
Click to collapse
Thanks very much for clarifying.
Sent from my Galaxy Nexus using Tapatalk
So i can confirm if anyone is having the problem with the signal bars and 3g/4g staying grey not turning blue, wiping data and flashing 4.0.4 gapps as fresh install brings it back to normal.
What are the changes in the apps? I can't even see the difference lol
Sent from my Galaxy Nexus using XDA App
Thanks for this
Please help, I installed ROM - Jellybean JRN84D 4.1: Rooted Stock Deodexed busybox - v2
When an incoming call display does not respond to me and I can not answer the phone.
I tried to phone back to factory settings, but always with me after a while the problem occurs again.
Thank you in advance for your help.
zek9
Flash other Radio Baseband and use stock Kernel, if this does not work then flash back ICS.
Edit: Did you wiped cache and dalvik cache when you flashed JB?
Yes, I did wipe Dalvik cache and cache and still the problem appeared again.
manumanfred said:
Flash other Radio Baseband and use stock Kernel, if this does not work then flash back ICS.
Edit: Did you wiped cache and dalvik cache when you flashed JB?
Click to expand...
Click to collapse
The question is not if Dalvik and cache was wiped but if you did a full wipe when flashing jb rom?
Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
eqjunkie829 said:
The question is not if Dalvik and cache was wiped but if you did a full wipe when flashing jb rom?
Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Yes, I have used before installing I superwipe.
same problem
Mine started doing the same thing after no problems for few days. Did wipe and all that. I'm thinking it might be app related. The ones I installed right before I noticed this are
Automateit pro
Lux
Set CPU
intenselyinsane said:
Mine started doing the same thing after no problems for few days. Did wipe and all that. I'm thinking it might be app related. The ones I installed right before I noticed this are
Automateit pro
Lux
Set CPU
Click to expand...
Click to collapse
Thank you very much, after uninstalling apk Lux problem is removed
Zek
Not sure what's going on but whenever I install these I'm getting low internal storage warnings. I wipe system, data, cache, dalvik 3x on TWRP. Any Ideas? It's only happening on these 2 roms for some reason.
macattack510 said:
Not sure what's going on but whenever I install these I'm getting low internal storage warnings. I wipe system, data, cache, dalvik 3x on TWRP. Any Ideas? It's only happening on these 2 roms for some reason.
Click to expand...
Click to collapse
Have u tried deleting some files? Has this happened with any other TW rom?
Sent from my SGH-T989 using Tapatalk 2
iNeedICS said:
Have u tried deleting some files? Has this happened with any other TW rom?
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I ended up fixing it. For some reason just on these roms and the new TWRP i have to wipe factory data right after installing and everything works perfectly
Glad you got it fixed was having the same issue because I didn't listen with one of the steps (go figure) but after a reflash and following that works awesome now.
Hey all, so I flashed the chemistry ROM and Goodness 8.0.3, which both have multi window. After I try to power on my phone after a full shut down, neither ROM seems to boot without me going into recovery and clearing both cache. Anyone else experience this or have a workaround?
Sent from my SPH-L710 using Tapatalk 2
Were they clean flashes?
Sent from my PG06100
CNexus said:
Were they clean flashes?
Sent from my PG06100
Click to expand...
Click to collapse
Yes, both done after a full wipe (minus internal SD card).
Sent from my SPH-L710 using Tapatalk 2
dante32278 said:
Hey all, so I flashed the chemistry ROM and Goodness 8.0, which both have multi window. After I try to power on my phone after a full shut down, neither ROM seems to boot without me going into recovery and clearing both cache. Anyone else experience this or have a workaround?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I just had the same issue I installed chemistry on my phone worked with no problems but on my moms phone i went into a bootloop after rebooting. I had to go into recovery do a factory reset wipe cache and dalvik cache and reflash the Rom all seems to be working now. Oh it was chemistry v5 btw.
Edit
Did you retore any system data with TB then hit fix permissions thats what was causing the problem for me.
Ghost8516 said:
I just had the same issue I installed chemistry on my phone worked with no problems but on my moms phone i went into a bootloop after rebooting. I had to go into recovery do a factory reset wipe cache and dalvik cache and reflash the Rom all seems to be working now. Oh it was chemistry v5 btw.
Edit
Did you retore any system data with TB then hit fix permissions thats what was causing the problem for me.
Click to expand...
Click to collapse
I did install non-system apps thru TB and installed latest Ktoonz kernel. Just not sure why either would result in a boot loop now.
Sent from my SPH-L710 using Tapatalk 2
Try flashing a different kernel, and try fixing permissions through rom manager, then reboot wipe cache and dalvik, make it run the optimizing apps thing.
Sent from my SPH-L710 using xda premium
This is my favorite ROM so far - BeanStalk - but I cannot get access to the latest build
I am looking for the BeanStalk 4.3 ROM for my Sprint Samsung Galaxy S 3. I see it for the S 4 but not the 3. Can someone direct me to the download page?
http://forum.xda-developers.com/showthread.php?p=43338493
Sent from the future via Tapatalk 4
Downloaded
I am getting an error Unfortunetly the process Android.process.acore has stopped. I have no mobile connection.
Help?
fzalta said:
I am getting an error Unfortunetly the process Android.process.acore has stopped. I have no mobile connection.
Help?
Click to expand...
Click to collapse
Sounds like you didn't wipe properly, or possibly your APN's got erased if no mobile connection.
sent from my GS3 usin Tapatalk4
wiped and checked it twice
I did a cache and a d-wipe. I then re downloaded both gapps and Rom. Restored back to 4.2 and tried again to no avail. Are we sure the download url is corrected?
joeyhdownsouth said:
Sounds like you didn't wipe properly, or possibly your APN's got erased if no mobile connection.
sent from my GS3 usin Tapatalk4
Click to expand...
Click to collapse
That's not a clean install and your laying one rom on top of another. You need to wipe cache and dalvik and do factory reset. Factory reset will wipe date from previous rom installed.
Especially needed when going from one type of system 4.2 to another type of system 4.3
Sent from the future via Tapatalk 4
Will try again
Before I restored I did a factory reset and than tried again. But I will do it as you say. Wipe cache, wipe davlik and factory reset. Than install 4.3 and then gapps 08132013. An I correct?
fzalta said:
Before I restored I did a factory reset and than tried again. But I will do it as you say. Wipe cache, wipe davlik and factory reset. Than install 4.3 and then gapps 08132013. An I correct?
Click to expand...
Click to collapse
Correct...
Sent from the future via Tapatalk 4
reset still no mobile connection
edfunkycold said:
Correct...
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Did exactly what you said still no mobile connection. I tried to restore APN settings it tells me I don't hand pushbutton
Then I suggest going back to a TW rom, making sure everything works.
Sent from the future via Tapatalk 4
Beanstalk 4.3
edfunkycold said:
Then I suggest going back to a TW rom, making sure everything works.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
What is a "TW" Rom? I am back at the Beanstalk 4.2 (restored, for the 3rd time)
fzalta said:
What is a "TW" Rom? I am back at the Beanstalk 4.2 (restored, for the 3rd time)
Click to expand...
Click to collapse
Ok good and everything works? Then stay there there are lots of issues till with 4.3 connection and signal being the biggest ones. Wait until they make those Kangs more stable.
Just curious did you flash the repair for data and root that they have in the thread?
EDIT:
OK also since you asked TW roms are based on stock Md4, these are roms built on actual source and released roms. They are extremely stable and for the most part everything works as Samsung intended it to.
You are using an Aosp rom built from CM source which in its own right is a Kang. A Kang is a copy that has been modded to work for a specific phone but the original came from some there source or device. There is no such thing as aosp, 4.2 or 4.3 for the S3 thus all these 4.2 and 4.3 roms are put together from other devices. That's why many of them have connectivity issues. Also why you can't update prl and profile or use sprint diagnostics tools with them.
This http://forum.xda-developers.com/showthread.php?p=45042736
And this http://forum.xda-developers.com/showthread.php?p=45092545
Sent from the future via Tapatalk 4
Beanstalk 4.3
edfunkycold said:
Ok good and everything works? Then stay there there are lots of issues till with 4.3 connection and signal being the biggest ones. Wait until they make those Kangs more stable.
Just curious did you flash the repair for data and root that they have in the thread?
This http://forum.xda-developers.com/showthread.php?p=45042736
And this http://forum.xda-developers.com/showthread.php?p=45092545
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
WIFI is working its the Sprint service thats not. I downloaded 4.3.05 where is the link to download 4.3.07?
fzalta said:
WIFI is working its the Sprint service thats not. I downloaded 4.3.05 where is the link to download 4.3.07?
Click to expand...
Click to collapse
Here http://d-h.st/TyA
Sent from the future via Tapatalk 4
fzalta said:
Did exactly what you said still no mobile connection. I tried to restore APN settings it tells me I don't hand pushbutton
Click to expand...
Click to collapse
How are you restoring APNs?
sent from my GS3 usin Tapatalk4
joeyhdownsouth said:
How are you restoring APNs?
sent from my GS3 usin Tapatalk4
Click to expand...
Click to collapse
Using APN backup and restore. But in any case using the correct download did the job. I was using the original one.
Thank you all!
Has anyone experienced the camera/gallery crashing each time a picture is taken?
Sent from my SPH-L710 using xda app-developers app