[Q] How to install LuPuS-JBv6 on xperia arc S - Xperia Arc Q&A, Help & Troubleshooting

Hello as the title says I need to help installing THIS I dont quite get how to install it so if you could please baby step me on this will be much appreciated
I have an experia
ARC S lt18i
Android Version 4.0.4
Kernel 2.6.32.9-perf
[email protected] #1
Build Number 4.1.B.0.587
is rooted
superuser
xparts installed
flashtools
drivers installed too
Win7 if relevant
not sure if any more info is needed but I'll be happy to add what is needed
thanks in advance for all your help
Raps

Rapsody10 said:
Hello as the title says I need to help installing THIS I dont quite get how to install it so if you could please baby step me on this will be much appreciated
I have an experia
ARC S lt18i
Android Version 4.0.4
Kernel 2.6.32.9-perf
[email protected] #1
Build Number 4.1.B.0.587
is rooted
superuser
xparts installed
flashtools
drivers installed too
Win7 if relevant
not sure if any more info is needed but I'll be happy to add what is needed
thanks in advance for all your help
Raps
Click to expand...
Click to collapse
Open Flashtool and select Fastboot mode
In the next window, select 'Select kernel to Flash'
Browse and select the .img file (LuPuS-JBv6-ARC&S.img). This will flash the kernel.
Also, move the wifi modules zip file (anzu-LuPuS-jB-v6-wifi_cm-ti-wlan_signed.zip) to SD card and then flash it via CWM
Reboot and enjoy LuPuS kernel

ela703 said:
Open Flashtool and select Fastboot mode
In the next window, select 'Select kernel to Flash'
Browse and select the .img file (LuPuS-JBv6-ARC&S.img). This will flash the kernel.
Also, move the wifi modules zip file (anzu-LuPuS-jB-v6-wifi_cm-ti-wlan_signed.zip) to SD card and then flash it via CWM
Reboot and enjoy LuPuS kernel
Click to expand...
Click to collapse
Thank you very much
I'm charging my phone in order to install LuPus
is there any rom you will advice to install after this kernel ?
should the kernel format my SD card ? for ext4 support ?
thanks again for your help and advice
Raps

mmmm
It seems I did something worng did not let me do it
here is the log
24/032/2013 19:32:31 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
24/032/2013 19:32:31 - INFO - You can drag and drop ftf files here to start flashing them
24/032/2013 19:32:40 - INFO - Device connected with USB debugging on
24/032/2013 19:32:41 - INFO - Connected device : LT18
24/032/2013 19:32:41 - INFO - Installed version of busybox : N/A
24/032/2013 19:32:41 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Build number : 4.1.B.0.587
24/032/2013 19:32:42 - INFO - Root Access Allowed
24/032/2013 19:32:50 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
24/032/2013 19:32:50 - INFO - Device Status: ADB mode
24/032/2013 19:32:52 - ERROR - This action can only be done in fastboot mode
24/033/2013 19:33:20 - ERROR - This action can only be done in fastboot mode
24/033/2013 19:33:30 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
24/033/2013 19:33:30 - INFO - Device Status: ADB mode
24/033/2013 19:33:33 - ERROR - This action can only be done in fastboot mode
24/033/2013 19:33:48 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
24/033/2013 19:33:51 - INFO - Device will soon enter fastboot mode
24/033/2013 19:33:51 - INFO - Device disconnected
24/033/2013 19:33:54 - INFO - Device connected in fastboot mode
24/034/2013 19:34:01 - INFO - Finished Fastboot Toolbox
24/034/2013 19:34:20 - INFO - Selected kernel (boot.img or kernel.sin): C:\Flashtool\firmwares\LuPuS_ARC-S_v6-jb2.img
24/034/2013 19:34:20 - INFO - Flashing selected kernel
24/034/2013 19:34:20 - INFO - sending 'boot' (6294 KB)...
24/034/2013 19:34:20 - INFO - FAILED (remote: The Device must be rooted first)
24/034/2013 19:34:20 - INFO - finished. total time: 0.002s
24/034/2013 19:34:20 - INFO - FASTBOOT Output:
sending 'boot' (6294 KB)...
FAILED (remote: The Device must be rooted first)
finished. total time: 0.002s
24/034/2013 19:34:20 - INFO - Please check the log before rebooting into system
Any advice will be appreciated
Raps

Did you unlocked the bootloader?

eeeeeerrrrrr
that is a good question
I might not have
which lead to the next question how to find out and how to do it if is not
Raps

Rapsody10 said:
eeeeeerrrrrr
that is a good question
I might not have
which lead to the next question how to find out and how to do it if is not
Raps
Click to expand...
Click to collapse
If you don't know, you didn't unlocked. You'll have to search a little, but a good start point is here: http://forum.xda-developers.com/showthread.php?t=2067008
It's your call to unlock or not... Unlock bootloader may void the warranty plus loose the DRM Keys (if you unlock via Sony Method). But unlocking is the only way to install Custom Kernels.
If you choose to keep it locked, you'll have to use only roms that are compatible with stock kernel (GB, ICS).

Thank you
I'm reading about the "unlocking" procedure
once is done can I revert it ? like flashing rom or something like that ?
Raps

OK I have unlooked the bootloader
am I supposed to "re-root" the phone after that ?
since I'm using "4.1.B.0.587" will need to downgrade again then
use DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su
then reflash "4.1.B.0.587"
then fastboot lupus ?
thanks in advance for your help
Raps

Rapsody10 said:
OK I have unlooked the bootloader
am I supposed to "re-root" the phone after that ?
since I'm using "4.1.B.0.587" will need to downgrade again then
use DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su
then reflash "4.1.B.0.587"
then fastboot lupus ?
thanks in advance for your help
Raps
Click to expand...
Click to collapse
Since it's unlocked (and I don't remember the steps, so I dunno if you have to reboot or not), just follow the instructions from ela703's post to install the kernel.
You just have to pay attention to the fact that this lupus kernel is designed for JB roms (eg: ParanoidAndroid 2.57). Probably comes with root and CWM, so you won't have to worry with root and CWM anymore.
(You only need doomlord's toolkit to root phones with stock kernel/locked bootloader).
After you flash the new kernel, just keep pressing 'vol down' and you'll enter in CWM with the .zip of the rom of your choice in your sdcard (again: if you use this kernel, look for JB roms). Thenceforth, follow the install instructions in the corresponding thread of your rom.

have installed lupus and also ParanoidAndroid seems to be working ok so far some problems with the camera but I think nothing mayor
I dont feel particulary faster thgovernor is set to 134 and 1401 or something like that
set it on smarassv2 tried ondemand first
thank you all for all your help
Raps

Use quick image is convenient

Rapsody10 said:
have installed lupus and also ParanoidAndroid seems to be working ok so far some problems with the camera but I think nothing mayor
I dont feel particulary faster thgovernor is set to 134 and 1401 or something like that
set it on smarassv2 tried ondemand first
thank you all for all your help
Raps
Click to expand...
Click to collapse
Camera is a problem in all JB ROMs. But it works so thats the main thing at leasst it does on CM. Intellidemand2 is probably fastest but drains battery, smatassv2 is best for performance and battery life.
For full working camera you should go back to ICS, I also got a kernel for that. To your question about relocking bootloader why would you want to. If you want to go back to STOCK just flash an FTF via flashtool.

wedgess said:
Camera is a problem in all JB ROMs. But it works so thats the main thing at leasst it does on CM. Intellidemand2 is probably fastest but drains battery, smatassv2 is best for performance and battery life.
For full working camera you should go back to ICS, I also got a kernel for that. To your question about relocking bootloader why would you want to. If you want to go back to STOCK just flash an FTF via flashtool.
Click to expand...
Click to collapse
Hello
thanks for the info
I'm going to evaluate it at least for a week to get the real day by day with it
I definitely agree with you about smatassv2 is the best for performance and battery life went from 22 hours or so on ICS to 2 days 9 hours ( 32 % left ) at the time of writing this post
I might try your ICS kernel and see how different they are
about the re-locking was only to be be sure could be undone.
at the moment the performance is brilliant I only miss my 16:9 pics that I cannot take and a few "minor" things but then there must be some sort of compromise I guess
Thanks again and open to your suggestions
Raps

Related

[Q] Stuck in boot loader - Please check & correct steps

Hello,
I'm stuck in bootloader (I think). It's my first attempt to flash a kernel and ROM, so I may have done something stupid... please correct any mistakes in my workflow:
1) rooted phone (ZergRush) - OK
2) Unlocked the bootloader (lollylost100) - OK
3) Flashed DoomKernelv22 using fastboot
4) Doomkernel recommends baseband36(+patch), so used flashtool to flash baseband36 (note first time I tried this I tried using "Select Kernel to Flash" - but got an error messge "FAILED (remote: Image won't fit, partition too small!)". So then I tried using "Select System to Flash", and had success:
07/005/2012 00:05:03 - INFO - Selected system (system.img or system.sin): C:\Flashtool\LT15_LT18_36_Baseband.ftf
07/005/2012 00:05:03 - INFO - Flashing selected system
07/005/2012 00:05:03 - INFO - Please check the log before rebooting into system
07/005/2012 00:05:28 - INFO - Finished Fastboot Toolbox​5)Booted into recovery and flashed the following (all in one session):
- ARC-DooMKernel-v22-modules_CWM
- PatchBaseBand36Libs.zip
- update-Arconium-8.2.zip
- update-arconium-FBInside_Timescape-v5.zip
- update-arconium-Sounds.zip
5a) didn't flash these ones:
- update-arconium-StockModules.zip (this is only for reverting back to a stock ROM?)
- couldn't find doomlord wifi/BT update, assumed it was all part of arconium? Also assumed that if this was a problem it would only affect wifi/BT not the rest of the install.
6) Booted phone - but just get a a loop of the "booting doomkernal" graphic / blank screen/buzz.
7) booted into recovery and wiped dalvik cache (no change)
8) booted into recovery and did factory reset/clear cache (no change)
9) reloaded all of the above (no change - still boot loop)
Think that's all, tried to be comprehensive.
Thanks in advance. R.
r_southampton said:
Hello,
I'm stuck in bootloader (I think). It's my first attempt to flash a kernel and ROM, so I may have done something stupid... please correct any mistakes in my workflow:
1) rooted phone (ZergRush) - OK
2) Unlocked the bootloader (lollylost100) - OK
3) Flashed DoomKernelv22 using fastboot
4) Doomkernel recommends baseband36(+patch), so used flashtool to flash baseband36 (note first time I tried this I tried using "Select Kernel to Flash" - but got an error messge "FAILED (remote: Image won't fit, partition too small!)". So then I tried using "Select System to Flash", and had success:
07/005/2012 00:05:03 - INFO - Selected system (system.img or system.sin): C:\Flashtool\LT15_LT18_36_Baseband.ftf
07/005/2012 00:05:03 - INFO - Flashing selected system
07/005/2012 00:05:03 - INFO - Please check the log before rebooting into system
07/005/2012 00:05:28 - INFO - Finished Fastboot Toolbox​5)Booted into recovery and flashed the following (all in one session):
- ARC-DooMKernel-v22-modules_CWM
- PatchBaseBand36Libs.zip
- update-Arconium-8.2.zip
- update-arconium-FBInside_Timescape-v5.zip
- update-arconium-Sounds.zip
5a) didn't flash these ones:
- update-arconium-StockModules.zip (this is only for reverting back to a stock ROM?)
- couldn't find doomlord wifi/BT update, assumed it was all part of arconium? Also assumed that if this was a problem it would only affect wifi/BT not the rest of the install.
6) Booted phone - but just get a a loop of the "booting doomkernal" graphic / blank screen/buzz.
7) booted into recovery and wiped dalvik cache (no change)
8) booted into recovery and did factory reset/clear cache (no change)
9) reloaded all of the above (no change - still boot loop)
Think that's all, tried to be comprehensive.
Thanks in advance. R.
Click to expand...
Click to collapse
i think you should
make a factory reset,wipe dalvic cache,wipe cache in recovery
then again flash doomlord kernal
and then flash acronium8.2 in recovery
and then reboot your phone
after it reboots successfully
see your phone is working
if it is working then you should enter into recovery and then flash any other zip module u want to flash
it is recommended not flash the any other zip file at the same instance when you are flashing a custom rom in recovery
Thank you abhisheak.bansal
Just did Factory Reset / Wipe Cache
Then booted to Recovery and flashed doomkernel modules
Powered off
rebooted to recovery and flashed arconium8.2
Powered off / repowered
Still loops in boot.
Need to go out now, but will try repeat slowly one step at a time from the initial kernel image using fastboot. Will leave the baseband stuff until the end in case that's confused things.
i would reccommend if all doesnt work out at all
then flash the official ftf via flashtool
1. Flash an official stock 4.0.2.A.0.42/.58/.62 FW --> http://forum.xda-developers.com/showthread.php?p=22105604
2. Flash/install the baseband patch AND the baseband itself --> http://forum.xda-developers.com/showthread.php?t=1382657
3. Flash Doomkernel --> http://forum.xda-developers.com/showthread.php?t=1172885
4. Flash the Doomkernel modules (MODULES for DooMKernel (v22)) --> http://forum.xda-developers.com/showthread.php?t=1172885
5. Flash the Arconium ROM --> http://forum.xda-developers.com/showthread.php?t=1325640 (doesn't include doomkernel 22 modules, hence step 4)
6. Flash optional Arconium packs
Apply a reboot between all steps and read/apply instructions as written the listed threads.
Thank you to all who have offered advice.
Decided to go with ICS (Arconium 3.C) and Stock Kernel+CWM. & baseband70
Flashed the above and all started working.
Although I was still on baseband-56....
That was my problem, I hadn't been using Flashtool properly. Although it appeared to be flashing something... It was until I started trying to use it in "Flashmode" rather than "Fastboot" mode (and with the firmwares in the firmware directory - rather than browsing to them), that I then got prompted to install lots of drivers... and was then able to flash the baseband properly. For those of you still reading, the 4 INFO lines in the first post do not indicate a successful baseband flash. This was the successful log:
07/039/2012 18:39:21 - INFO - Selected LT15_LT18_70_Baseband.ftf
07/039/2012 18:39:21 - INFO - Preparing files for flashing
07/039/2012 18:39:21 - INFO - Please connect your device into flashmode.
07/039/2012 18:39:27 - INFO - Device connected in flash mode
07/039/2012 18:39:27 - INFO - Opening device for R/W
07/039/2012 18:39:27 - INFO - Reading device information
07/039/2012 18:39:27 - INFO - Phone ready for flashmode operations.
07/039/2012 18:39:27 - INFO - Start Flashing
07/039/2012 18:39:27 - INFO - Flashing loader
07/039/2012 18:39:30 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTED
07/039/2012 18:39:30 - INFO - Flashing fota0.sin
07/039/2012 18:39:31 - INFO - Flashing fota1.sin
07/039/2012 18:39:32 - INFO - Flashing adsp.sin
07/039/2012 18:39:35 - INFO - Flashing amss.sin
07/039/2012 18:39:44 - INFO - Flashing amss_fs_ayame.sin
07/039/2012 18:39:45 - INFO - Ending flash session
07/039/2012 18:39:45 - INFO - Flashing finished.
07/039/2012 18:39:45 - INFO - Please wait. Phone will reboot
I was wondering why you'd want to flash a GB rom instead of an ICS one
But glad you got it sorted out!
By the way, the steps I mentioned before (minus step 2) also work for the Arconium 3C release. And if you flash the official .431 FW in step 1, you'll have baseband .72
I was thinking that GB would probably be better on single core Arc... but it was a close call.
Anyway, so far ICS is doing nicely. Certainly faster than it used to be, but that's probably down to the increase in memory I got by going with a custom ROM.
Out of curiosity, what might BB 72 offer by way of improvement?
As far as I know, there's no difference between .70 and .72 basebands.
But I found it easyer, when I did the steps, to just flash the newest firmware, which included the .72

[Q] something gone wrong when flashing

So here's what I did so far... The bootloader was unlocked, so I rooted the phone, installed clockwork. I spent hours reading about kernels and the different roms but wasn' really getting anywhere. Since my phone needed to be taken to get repaired anyway I decided to just choose a rom and install it from the guide i was using.
I backed up using clockwork, formatted and installed, and it said it was fine. But when I reboot it just hangs on the Sony Ericsson screen, have to take battery out to turn it off....what can I do now? I can't load the backup image because it won't let me load clockwork. did this happen because I didn't install a custom kernel first?
renvaar said:
So here's what I did so far... The bootloader was unlocked, so I rooted the phone, installed clockwork. I spent hours reading about kernels and the different roms but wasn' really getting anywhere. Since my phone needed to be taken to get repaired anyway I decided to just choose a rom and install it from the guide i was using.
I backed up using clockwork, formatted and installed, and it said it was fine. But when I reboot it just hangs on the Sony Ericsson screen, have to take battery out to turn it off....what can I do now? I can't load the backup image because it won't let me load clockwork. did this happen because I didn't install a custom kernel first?
Click to expand...
Click to collapse
flash another kernel (supported for your rom always)
boot on cwm
factory reset
mounts and storage > format system
advanced > wipe dalvik cache
advanced > wipe battery stats
flash your desirable rom, flash wifi modules and try again fresh
renvaar said:
So here's what I did so far... The bootloader was unlocked, so I rooted the phone, installed clockwork. I spent hours reading about kernels and the different roms but wasn' really getting anywhere. Since my phone needed to be taken to get repaired anyway I decided to just choose a rom and install it from the guide i was using.
I backed up using clockwork, formatted and installed, and it said it was fine. But when I reboot it just hangs on the Sony Ericsson screen, have to take battery out to turn it off....what can I do now? I can't load the backup image because it won't let me load clockwork. did this happen because I didn't install a custom kernel first?
Click to expand...
Click to collapse
Your kernel is stock and bootloader locked? If so then download pc companion and do a repair and if your bootloader is unlocked then download a stock ftf file for your phone and flash it with flashtool. I had exactly same problem with flashing custom firmwares on my Arc s but after few tries I realized that i need to format every partition excluding sdcard in a "mounts and storage" sub-menu.
---------- Post added at 11:31 AM ---------- Previous post was at 11:29 AM ----------
Retrosid said:
flash another kernel (supported for your rom always)
boot on cwm
factory reset
mounts and storage > format system
advanced > wipe dalvik cache
advanced > wipe battery stats
flash your desirable rom, flash wifi modules and try again fresh
Click to expand...
Click to collapse
I think his bootloader is locked because he lost a recovery after flashing new rom. His CWM was probably installed with x-parts.
as I said... it wont let me go as far as being able to load up clockwork...
thanks pypcier, I'm trying flashtool now... but I get this error...
18/036/2013 18:36:40 - INFO - Device disconnected
18/036/2013 18:36:53 - INFO - Device connected in flash mode
18/037/2013 18:37:03 - INFO - Selected LT15i_4.0.2.A.0.42_Generic Global.ftf
18/037/2013 18:37:03 - INFO - Preparing files for flashing
18/037/2013 18:37:03 - INFO - Please connect your device into flashmode.
18/037/2013 18:37:03 - INFO - Opening device for R/W
18/037/2013 18:37:03 - INFO - Reading device information
18/037/2013 18:37:03 - INFO - Phone ready for flashmode operations.
18/037/2013 18:37:03 - INFO - Current device : LT15i - CB5A1FEFCM - 1247-1061_R7D - 1241-4324_4.0.2.A.0.42 - WORLD-1-8_4.0.2.A.0.42
18/037/2013 18:37:03 - INFO - Start Flashing
18/037/2013 18:37:03 - INFO - Processing loader
18/037/2013 18:37:03 - INFO - Checking header
18/037/2013 18:37:03 - INFO - Ending flash session
18/037/2013 18:37:03 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Can you tick a "no final verification" box and try again?
it changes to this if i check the button...
18/052/2013 18:52:28 - INFO - Selected LT15i_4.0.2.A.0.42_Generic Global.ftf
18/052/2013 18:52:28 - INFO - Preparing files for flashing
18/052/2013 18:52:28 - INFO - Please connect your device into flashmode.
18/052/2013 18:52:29 - INFO - Opening device for R/W
18/052/2013 18:52:29 - INFO - Reading device information
18/052/2013 18:52:45 - INFO - Unable to read from phone after having opened it.
18/052/2013 18:52:45 - INFO - trying to continue anyway
18/052/2013 18:52:45 - INFO - Start Flashing
18/052/2013 18:52:45 - INFO - Processing loader
18/052/2013 18:52:45 - INFO - Checking header
18/052/2013 18:52:45 - INFO - Ending flash session
18/052/2013 18:52:45 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
18/052/2013 18:52:45 - ERROR - Error flashing. Aborted
18/052/2013 18:52:45 - INFO - Device disconnected
EDIT: it did that the first time, then i try the same way again and it gives me the previous error. would an older ftf make a difference?
You are sure that your bootloader is unlocked? Have you ever flashed a custom kernel using fastboot? If yes then try to flash custom kernel with recovery. If this wont help then try to update and reinstall your flashtool and download newest stock ftf for your phone.
I'm pretty sure it is, as I remember having a similar problem a long time ago and flashing it. problem is I don't have the old files i used before, and I can't find any downloads that work in my country..
Error code from your flashtool log looks like there is a problem with acquiring permission to flash a firmware and that suggests that your bootloader is locked. Try to download pc companion from sony site and do a repair. If your bootloader is locked this will restore your phone to stock and if your bootloader is unlocked then pcc wont recognize your phone.
just tried pc companion. it asks me to swipe the bar down, but as I can't get past the logo it wont work. so repair just hangs there...
What bar... I don't understand what you are talking about. For a repair with pc companion you don't even need to turn on your phone you just click update button and then small blue "repair" text in a popup window then firmware is downloaded and you are asked to turn off your phone and connect usb cable while holding a back button.
I found your previous thread and It looks like your bootloader is unlocked because OTA update bricked your phone. I have a link to a ftf you used last time to repair your phone http://forum.xda-developers.com/showthread.php?t=1324707 (its inside of this archive with complete but outdated flashtool and drivers) but you should try a pcc first so we will be sure if your bootloader is locked or not.
renvaar said:
just tried pc companion. it asks me to swipe the bar down, but as I can't get past the logo it wont work. so repair just hangs there...
Click to expand...
Click to collapse
Use this http://developer.sonymobile.com/201...ocked-xperia-smartphones-video-beta-download/ if your bootloader is unlocked it will return it to stock if it does not connect it means your bootloader is locked.It is a new beta tool from sony for the arc:good:
tallman43 said:
Use this http://developer.sonymobile.com/201...ocked-xperia-smartphones-video-beta-download/ if your bootloader is unlocked it will return it to stock if it does not connect it means your bootloader is locked.It is a new beta tool from sony for the arc:good:
Click to expand...
Click to collapse
Wow its great I hadn't heard of this before.
pypcier said:
Wow its great I didn't heard of this before.
Click to expand...
Click to collapse
Yep it's a good tool to return to stock and also to check if your bootloader is unlocked (Because it only works on unlocked bootloaders) Arc & couple other devices are supported but they are going to make more devices available:good:
pypcier said:
Wow its great I hadn't heard of this before.
Click to expand...
Click to collapse
You would have had you browsed the stickys.
XperienceD said:
You would have had you browsed the stickys.
Click to expand...
Click to collapse
I'm not going to read through every new sticky just to make you happy.
pypcier said:
I'm not going to read through every new sticky just to make you happy.
Click to expand...
Click to collapse
Mines been there while, and People shouldn't read them to please anyone, they should read them, especially when new, to LEARN.
Sent from Myushi

[Solved] Arc s stuck at airplane mode

Hello guys;
I have a big problem with my xperia arc s lt18i (one of my cousin to be clear), with unlocked bootloader
1) When flashing a stock rom with flash tool, the phone stuck at logo after rebooting
2) When flashing a custom rom, the phone stuck at airplane mode even if the airplane mode is off. There's no signal network and when i try to make a call, it's asking me to leave airplane mode before making a call.
I'v search all the forum and internet, try different custom rom, from cm7 to kitkat but still with the same problem.
How can i fix this ? :crying::crying:
Rodney SANK said:
Hello guys;
I have a big problem with my xperia arc s lt18i (one of my cousin to be clear), with unlocked bootloader
1) When flashing a stock rom with flash tool, the phone stuck at logo after rebooting
2) When flashing a custom rom, the phone stuck at airplane mode even if the airplane mode is off. There's no signal network and when i try to make a call, it's asking me to leave airplane mode before making a call.
I'v search all the forum and internet, try different custom rom, from cm7 to kitkat but still with the same problem.
How can i fix this ? :crying::crying:
Click to expand...
Click to collapse
Flash stock rom and stock kernel, relock bootloader, and try to repair it with pc companion
electrash said:
Flash stock rom and stock kernel, relock bootloader, and try to repair it with pc companion
Click to expand...
Click to collapse
Thank's Electrash for answering. I've try the method given in your guide to relock the bootloader with Blagus ftf file but it's not working (http://forum.xda-developers.com/showthread.php?t=1324703)
I've not found another way to relock the bootloader.
Rodney SANK said:
Thank's Electrash for answering. I've try the method given in your guide to relock the bootloader with Blagus ftf file but it's not working (http://forum.xda-developers.com/showthread.php?t=1324703)
I've not found another way to relock the bootloader.
Click to expand...
Click to collapse
Please, post flashtool log of process when you try to flash bl relock file.
1897
electrash said:
Please, post flashtool log of process when you try to flash bl relock file.
Click to expand...
Click to collapse
Here's is the log
05/050/2014 03:50:19 - INFO - Device disconnected
05/050/2014 03:50:34 - INFO - Selected Bundle for Xperia. FW release : Relock_bootloader. Customization : v1
05/050/2014 03:50:34 - INFO - Preparing files for flashing
05/050/2014 03:50:34 - INFO - Please connect your device into flashmode.
05/050/2014 03:50:41 - INFO - Device connected in flash mode
05/050/2014 03:50:41 - INFO - Opening device for R/W
05/050/2014 03:50:41 - INFO - Reading device information
05/050/2014 03:50:42 - INFO - Phone ready for flashmode operations.
05/050/2014 03:50:42 - INFO - Current device : LT18i - CB5A1HNQHD - 1254-8596_R1I - 1253-8238_4.1.B.0.587 - WORLD-i_4.1.B.0.587
05/050/2014 03:50:42 - INFO - Start Flashing
05/050/2014 03:50:42 - INFO - Using an unofficial loader
05/050/2014 03:50:42 - INFO - Device loader has not been identified. Using the one from the bundle
05/050/2014 03:50:42 - INFO - Processing loader.sin
05/050/2014 03:50:42 - INFO - Checking header
05/050/2014 03:50:42 - INFO - Flashing data
05/050/2014 03:50:42 - INFO - Processing of loader.sin finished.
05/050/2014 03:50:44 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Boot version : r9A029 / Bootloader status : ROOTED
05/050/2014 03:50:44 - INFO - No bootdelivery to send
05/050/2014 03:50:44 - INFO - Flashing preset.ta
05/050/2014 03:50:44 - INFO - Writing TA unit : [00, 00, 08, B2, 00, 00, 00, 02, 00, 00]
05/050/2014 03:50:44 - INFO - Ending flash session
05/050/2014 03:50:44 - INFO - Flashing finished.
05/050/2014 03:50:45 - INFO - Please unplug and start your phone
05/050/2014 03:50:45 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
05/050/2014 03:50:45 - INFO - Device connected in flash mode
05/051/2014 03:51:00 - INFO - Device disconnected
05/009/2014 04:09:06 - INFO - Device connected with USB debugging on
Thank you for sharing. I will try to ask someone if they know what is the problem.
As i see, everything went good.
electrash said:
Thank you for sharing. I will try to ask someone if they know what is the problem.
As i see, everything went good.
Click to expand...
Click to collapse
I just found out that it is written ""au by KDDI is11s" on the back cover of the phone. After some search on the net, i discover that this phone is an xperia acro is11s branded for a japan network.
If then, am i using the bad stok files for flashing it ? why is it written Lt18i under the batterry place ?
I also found this thread about someone having the same problem (sorry, didn't saw that before) http://forum.xda-developers.com/gen...lease-help-t2885229/post55617937#post55617937
I'll try to flash the rom given in the site that was suggested to him and give you the result later.
i have found the solution. It's was given in this thread by at0607 http://forum.xda-developers.com/showpost.php?p=49388077&postcount=18
Step to get your IS11S function fully but 3G (EDGE is OK):
1. Unlock your phone: you will need some money.
2. Download "IS11S_4.0.1.B.0.112_KDDI.ftf" & "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version (google them).
3. Open "IS11S_4.0.1.B.0.112_KDDI.ftf" with 7-zip and extract "loader.sin" & "amss_fs.sin".
4. Open "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version with 7-zip and move "loader.sin" & "amss_fs.sin" into it. Delete "amss_fs_ayame.sin".
5. Flash edited "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version by Flashtool (mine is 0.8.5.0).
I just used differents files :
1. Already have an unlocked phone
2. Used "4.0.1.B.0.118.ftf" file avaible here (https://s.basketbuild.com/filedl/devs?dev=AndroPlus&dl=AndroPlus/IS11S_4.0.1.B.0.118_au.ftf) and Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf avaible here (
3. Opened "4.0.1.B.0.118.ftf" with 7-zip and extract "loader.sin" & "amss_fs_akane.sin".
4. Opened "Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf" and move "loader.sin" & "amss_fs_akane.sin" into it. Deleted "amss_fs_ayame.sin" and simlock.ta.
5. Flashed this changed Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf with flash tool and youpi.
My phone is fully functionnal with ICS. :laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Thank's guy for your patiente. I didn't forget to thank at0607 for his fabulous solution.
How to do for adding "Solved" to the thread title ?
queation
Rodney SANK said:
i have found the solution. It's was given in this thread by at0607 http://forum.xda-developers.com/showpost.php?p=49388077&postcount=18
Step to get your IS11S function fully but 3G (EDGE is OK):
1. Unlock your phone: you will need some money.
2. Download "IS11S_4.0.1.B.0.112_KDDI.ftf" & "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version (google them).
3. Open "IS11S_4.0.1.B.0.112_KDDI.ftf" with 7-zip and extract "loader.sin" & "amss_fs.sin".
4. Open "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version with 7-zip and move "loader.sin" & "amss_fs.sin" into it. Delete "amss_fs_ayame.sin".
5. Flash edited "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version by Flashtool (mine is 0.8.5.0).
I just used differents files :
1. Already have an unlocked phone
2. Used "4.0.1.B.0.118.ftf" file avaible here (https://s.basketbuild.com/filedl/devs?dev=AndroPlus&dl=AndroPlus/IS11S_4.0.1.B.0.118_au.ftf) and Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf avaible here (
3. Opened "4.0.1.B.0.118.ftf" with 7-zip and extract "loader.sin" & "amss_fs_akane.sin".
4. Opened "Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf" and move "loader.sin" & "amss_fs_akane.sin" into it. Deleted "amss_fs_ayame.sin" and simlock.ta.
5. Flashed this changed Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf with flash tool and youpi.
My phone is fully functionnal with ICS. :laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Thank's guy for your patiente. I didn't forget to thank at0607 for his fabulous solution.
Click to expand...
Click to collapse
how to unlock my phone? please show me how you had unlocked your phone
hussam2020 said:
how to unlock my phone? please show me how you had unlocked your phone
Click to expand...
Click to collapse
I don't know how to do it, the phone was already unlocked when my cousin gave it to me. Just search the forum.

i cant install any stock rom on my arc/s

i am long time ago on cm10 and now i want to go back to the stock rom..
i tryed maybe all solution here and nothing when i flash stok kernel is ok but cwm is not there and is stock at recovery logo
with flashtol i can flash only kernel with boot.img nothing else no firmaware at all.
with pc companion it says your software is up to date.
maybe i didn search all forum or maybe make mistake somewhere but 5 days trying and nothing.
it was long time ago when i unlock boot and root and install custom firmwares but now i cant .
if someone can help me i appreciated.
thanks in advance
lulisat said:
i am long time ago on cm10 and now i want to go back to the stock rom..
i tryed maybe all solution here and nothing when i flash stok kernel is ok but cwm is not there and is stock at recovery logo
with flashtol i can flash only kernel with boot.img nothing else no firmaware at all.
with pc companion it says your software is up to date.
maybe i didn search all forum or maybe make mistake somewhere but 5 days trying and nothing.
it was long time ago when i unlock boot and root and install custom firmwares but now i cant .
if someone can help me i appreciated.
thanks in advance
Click to expand...
Click to collapse
flash stock ftf with flashtool should work 100%
follow this guide: http://talk.sonymobile.com/t5/Andro...y-Bean-ICS-Ice-Cream-Sandwich-and/td-p/154389
follow this guide. just press other button for flashmode- (google for ot, you need the green light that indicate flashmode)
-install falshtool's drivers-
-install android sdk
-they are needed go drivers.
some windows 8 or 8.1 give problem for drivers. so keep out all is good.
bejunk said:
flash stock ftf with flashtool should work 100%
follow this guide: http://talk.sonymobile.com/t5/Andro...y-Bean-ICS-Ice-Cream-Sandwich-and/td-p/154389
follow this guide. just press other button for flashmode- (google for ot, you need the green light that indicate flashmode)
-install falshtool's drivers-
-install android sdk
-they are needed go drivers.
some windows 8 or 8.1 give problem for drivers. so keep out all is good.
Click to expand...
Click to collapse
thanks m8 but i tryed ewerything and flashtool will not flash any ftf file.
just error .
regards
lulisat said:
thanks m8 but i tryed ewerything and flashtool will not flash any ftf file.
just error .
regards
Click to expand...
Click to collapse
screenshot? some more info pls. the problem is 100% on your side, so just work.
update flashtool-
use normal (no 64bit version) flashtool
now start it & prepare flash using flashmode (choose the fw etc) (DONT connect phone!!!)
its work? (flashtool showing the "connect ur phone screen")
then connect phone. powered off & hold that button for flashmode !! (green led)
now it should start flashing firmware. if not send me screen shot
bejunk said:
screenshot? some more info pls. the problem is 100% on your side, so just work.
update flashtool-
use normal (no 64bit version) flashtool
now start it & prepare flash using flashmode (choose the fw etc) (DONT connect phone!!!)
its work? (flashtool showing the "connect ur phone screen")
then connect phone. powered off & hold that button for flashmode !! (green led)
now it should start flashing firmware. if not send me screen shot
Click to expand...
Click to collapse
10/046/2015 12:46:41 - INFO - Flashtool Version 0.9.18.5 built on 14-02-2015 15:30:00
10/046/2015 12:46:41 - INFO - Executing search strategies to find proxy selector
10/046/2015 12:46:41 - INFO - No proxy found for IE. Trying next one
10/046/2015 12:46:41 - INFO - No proxy found for firefox. Trying next one
10/046/2015 12:46:41 - INFO - No proxy found for java. Trying next one
10/046/2015 12:46:41 - INFO - Syncing devices from github
10/046/2015 12:46:42 - INFO - Scanning devices folder for changes.
10/046/2015 12:46:48 - INFO - Pulling changes from github.
10/046/2015 12:46:50 - INFO - Devices sync finished.
10/046/2015 12:46:55 - INFO - Device connected with USB debugging on
10/046/2015 12:46:56 - INFO - Connected device : SonyEricson Xperia Arc
10/046/2015 12:46:56 - INFO - Installed version of busybox : BusyBox v1.20.2-jb bionic (2012-11-25 17:47 +0100) multi-call binary.
10/046/2015 12:46:56 - INFO - Android version : 4.1.2 / kernel version : 2.6.32.60-FusioN-5.4 / Build number : JZO54K
10/046/2015 12:46:56 - INFO - Checking root access
10/046/2015 12:46:57 - INFO - Root Access Allowed
device conected
10/050/2015 12:50:24 - INFO - Processing of loader.sin finished.
10/050/2015 12:50:26 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Boot version : r9A029 / Bootloader status : ROOTED
10/050/2015 12:50:27 - INFO - No bootdelivery to send
10/050/2015 12:50:27 - INFO - Processing kernel.sin
10/050/2015 12:50:27 - INFO - Checking header
10/050/2015 12:50:27 - ERROR - Processing of kernel.sin finished with errors.
10/050/2015 12:50:27 - INFO - Ending flash session
10/050/2015 12:50:27 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="SIN_HEAD_VER";ERR_DYNAMIC="Failed to verify sin header";
and error after trying to flash
lulisat said:
10/050/2015 12:50:24 - INFO - Processing of loader.sin finished.
10/050/2015 12:50:26 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Boot version : r9A029 / Bootloader status : ROOTED
10/050/2015 12:50:27 - INFO - No bootdelivery to send
10/050/2015 12:50:27 - INFO - Processing kernel.sin
10/050/2015 12:50:27 - INFO - Checking header
10/050/2015 12:50:27 - ERROR - Processing of kernel.sin finished with errors.
10/050/2015 12:50:27 - INFO - Ending flash session
10/050/2015 12:50:27 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="SIN_HEAD_VER";ERR_DYNAMIC="Failed to verify sin header";
and error after trying to flash
Click to expand...
Click to collapse
you connecting phone wrong, do:
1.prepare ftf in flashtool. until window tell to connect phone (dont connect phone until then)
2. phone MUST be off. hold volume down when connecting. green led will light, flashtool start, be patient. can take long.
if still not work, download new ftf from link above. then its bad download..
good luck!
bejunk said:
you connecting phone wrong, do:
1.prepare ftf in flashtool. until window tell to connect phone (dont connect phone until then)
2. phone MUST be off. hold volume down when connecting. green led will light, flashtool start, be patient. can take long.
if still not work, download new ftf from link above. then its bad download..
good luck!
Click to expand...
Click to collapse
thanks m8 but this is not my first time at all . i had updates 100 time sony and other phones .Cause i love to test softs.
but this make me crazy.i know procedure how to and drivers are correct . I think i have erased system files ore i dont know ..
and really i dont know now is it my boot unlocked or locked cause i tryed many firmwares .
lulisat said:
thanks m8 but this is not my first time at all . i had updates 100 time sony and other phones .Cause i love to test softs.
but this make me crazy.i know procedure how to and drivers are correct . I think i have erased system files ore i dont know ..
and really i dont know now is it my boot unlocked or locked cause i tryed many firmwares .
Click to expand...
Click to collapse
yes i can understand u i do also phones for many friends but sometimes even i get stuck bcuz some little thing i forgot...
but maybe this phone is hw damage... but from the log it seems something id wrong with the file so thats i said to redownload...
the thing is, you can wipe what u want, but still flashmode & fastboot should work. its like dl mode on sammy devices.
to check if you have unlocked bootloader, just power off phone & hold menu key when connecting to pc. if the blue led lit, you can open cmd in folder where adb.exe is (in android sdk) & type fastboot -devices. if its shown, you can try flash a kernel, or even unlock (if its lock), the imei is on the sticker behind the battery
if you once unlocked boot, it will stay unlocked no matter what u wipe or flash. you can manually relock boot, but if not done this its unlock 100%.

[FIX] Restoring Flashmode

UPD: same fix for Xperia L (C2105)
Some phones (I mean only Xperia M of course) for unknown reason can't enter to Flashmode (Vol Down + USB)
This mode obliviously required to flash stock ROM via Flashtool / PC Companion / SEUS
When try to enter it phone just won't connect. But phone itself works fine (can boot).
Yeah, there is stock CWM-backups, but anyway broken mode is not good.
I did some research with user that had this problem and found cause.
Somehow 4th partition (s1sbl2) contain wrong data – it mismatch with OK phone.
Seems there stored loader for dealing with flashing.
After restoring good partition dump Flashmode works!
This helped 2 people, so I want to share this widely.
Do it on your own risk.
If you have custom recovery (CWM / TWRP)
1. Download attached ZIP
2. Copy it somewhere on phone
3. Flash it via recovery like any other ZIP
If you have only root
0. Not rooted? Use Towelroot for 4.3
1. Download attached file 1.img
2. Copy it into root of internal storage
3. Install app Terminal Emulator
4. Launch it and enter su
5. Allow root access
6. Carefully enter this (at the end not number 12, there small L and 2):
Code:
dd if=/sdcard/1.img of=/dev/block/platform/msm_sdcc.1/by-name/s1sbl2
i have this promblem where the green only blink once how can i fix it cause im already stucked at sony logo
nikko3214123 said:
how can i fix it cause im already stucked at sony logo
Click to expand...
Click to collapse
1. Copy that ZIP with fix to sdcard via cardreader
2. Unlock bootloader (required only fastboot, Google for tutorial)
3. Install via fastboot kernel with CWM (link in post)
4. Enter CWM: at Sony logo & purple LED press Vol Up (or Down?)
5. Flash that ZIP
6. Now flash stock ROM via Flashtool
Note: all your data on phone including internal storage will be erased (twice)
Please, write here about result.
Bonoboo said:
1. Copy that ZIP with fix to sdcard via cardreader
2. Unlock bootloader (required only fastboot, Google for tutorial)
3. Install via fastboot kernel with CWM (link in post)
4. Enter CWM: at Sony logo & purple LED press Vol Up (or Down?)
5. Flash that ZIP
6. Now flash stock ROM via Flashtool
Note: all your data on phone including internal storage will be erased (twice)
Please, write here about result.
Click to expand...
Click to collapse
sir i dont have cwm on the phone is there any way to fix this? thanks for the quick response
nikko3214 said:
i dont have cwm on the phone is there any way to fix this?
Click to expand...
Click to collapse
No.
You need install CWM via fastboot after unlocking bootloader.
I already described this.
Bonoboo said:
No.
You need install CWM via fastboot after unlocking bootloader.
I already described this.
Click to expand...
Click to collapse
im stucked at < waiting for device > my phone is already on fastboot mode
---------- Post added at 10:18 AM ---------- Previous post was at 10:04 AM ----------
and im having trouble with flashtool it says
13/016/2015 18:16:29 - INFO - Current device : C1905 - YT910HYWCB - 1274-5438_R3A - 1272-2325_15.1.C.1.17 - WORLD-i_15.1.C.1.17
13/016/2015 18:16:29 - INFO - Start Flashing
13/016/2015 18:16:29 - INFO - Processing loader.sin
13/016/2015 18:16:29 - INFO - Checking header
13/016/2015 18:16:29 - INFO - Flashing data
13/016/2015 18:16:29 - INFO - Processing of loader.sin finished.
13/016/2015 18:16:29 - INFO - Loader : S1_Root_dbe9 - Version : loader_MSM8X30_10 / Boot version : S1_Boot_MSM_8227_5 / Bootloader status : ROOTABLE
13/016/2015 18:16:30 - INFO - Processing partition-image.sin
13/016/2015 18:16:30 - INFO - Checking header
13/016/2015 18:16:30 - INFO - Flashing data
13/016/2015 18:16:30 - INFO - Processing of partition-image.sin finished.
13/016/2015 18:16:30 - INFO - No bootdelivery to send
13/016/2015 18:16:30 - INFO - Processing kernel.sin
13/016/2015 18:16:30 - INFO - Checking header
13/016/2015 18:16:30 - INFO - Flashing data
13/016/2015 18:16:30 - ERROR - Processing of kernel.sin finished with errors.
13/016/2015 18:16:30 - INFO - Ending flash session
13/016/2015 18:16:30 - ERROR -
13/016/2015 18:16:30 - ERROR - Error flashing. Aborted
13/016/2015 18:16:30 - INFO - Device connected in flash mode
13/016/2015 18:16:31 - INFO - Device disconnected
nikko3214 said:
Device connected in flash mode
Click to expand...
Click to collapse
So you don't need this fix if Flashtool recognize phone.
What actually happen with phone?
Suddenly rebooted and stuck and animation?
Log probably point to often problem with NAND chip - it just going broken, similar to HDD / SSD.
Bonoboo said:
So you don't need this fix if Flashtool recognize phone.
What actually happen with phone?
Suddenly rebooted and stuck and animation?
Log probably point to often problem with NAND chip - it just going broken, similar to HDD / SSD.
Click to expand...
Click to collapse
this phone suddenly reboots and then it got stucked to sony logo and when i put it on flashmode the green only blinks once then when i am flashing sometimes the loader.sin has error or the kerne.sin
nikko3214 said:
suddenly reboots and then it got stucked to sony logo ... sometimes the loader.sin has error or the kernel.sin
Click to expand...
Click to collapse
Unfortunately, very likely this is classic faulty NAND memory problem.
There's a lot people faced this on XDA and other forums.
Only replacing board, probably by warranty.
Bonoboo said:
Unfortunately, very likely this is classic faulty NAND memory problem.
There's a lot people faced this on XDA and other forums.
Only replacing board, probably by warranty.
Click to expand...
Click to collapse
ok thank you for helping sir
Plz Help
i have xperia m, after unlocking bootloader it stuck on bootlooping, i have not enable usb debugging...any way to fix it?
catmob said:
i have xperia m, after unlocking bootloader it stuck on bootlooping
Click to expand...
Click to collapse
It's normal, just flash stock via Flashtool
Or you can't due broken flashmode?
Bonoboo said:
It's normal, just flash stock via Flashtool
Or you can't due broken flashmode?
Click to expand...
Click to collapse
when i am going to flash...for disabling usb debugging previously, i cant flash my phone...please help me
catmob said:
when i am going to flash i cant flash my phone
Click to expand...
Click to collapse
Please, explain problem in details.
At what step you actually stuck?
Bonoboo said:
Please, explain problem in details.
At what step you actually stuck?
Click to expand...
Click to collapse
sir i have going to unlock my bootloader without enable usb debugging & also i have not installed any custom recovery mode.
now my phone stuck into bootloop...
now what will i do? i can go to fastboot mode and flashmode,
and i have read some instruction about flashing via flashtool...when i am going to flash my phone..it showing error that i have to enable usb debuging to flash the rom
sir plz help me
catmob said:
when i am going to flash my phone..it showing error that i have to enable usb debuging to flash the rom
Click to expand...
Click to collapse
You definitely just need flash stock via Flashtool.
Forget about USB debugging, it's totally unrelated here.
Just carefully follow flashing tutorial
You need flash not in fastboot mode, but in flashmode.
Bonoboo said:
You definitely just need flash stock via Flashtool.
Forget about USB debugging, it's totally unrelated here.
Just carefully follow flashing tutorial
You need flash not in fastboot mode, but in flashmode.
Click to expand...
Click to collapse
ok will my problem solved sir? following these steps?
catmob said:
ok will my problem solved sir? following these steps?
Click to expand...
Click to collapse
Again: yes.
Bonoboo said:
Again: yes.
Click to expand...
Click to collapse
Thnk you so much sir....you saved my life....my prblm has been solved
sir can i flash another rom (not official) like mi,cyaongen mod without root?

Categories

Resources