Related
Hi,
plz help me make my phone working again. I wanted to flash cm 10 after manged to flash cm9. cm 9 ran after trying everything out for hours. Today i downloaded cm10 and flashed the kernel. after that i wasnt able to open the bootloader, so i flashed cm9 kernel again. That worked so far. i was able to open bootloader again, but it showed an failure notice whilst installing cm 9.
"assert failed: getprop ("ro.product.device") == "r800i" ......" this is copied with the endings r800i/a/at and zeus
E: Error in sd /sdcard/cm-9.1.0-zeus.zip
(Status 7)
Installation aborted.
I tried it a few times. Flashed cm 10 kernel, flashed cm9 kernel back, but its always the same failure notice. I would like to use cm9 again, it was good at all, but i wanted to update cm10 today. Please give me an how-to what to do unbricking my play.
_hacker_ said:
Hi,
plz help me make my phone working again. I wanted to flash cm 10 after manged to flash cm9. cm 9 ran after trying everything out for hours. Today i downloaded cm10 and flashed the kernel. after that i wasnt able to open the bootloader, so i flashed cm9 kernel again. That worked so far. i was able to open bootloader again, but it showed an failure notice whilst installing cm 9.
"assert failed: getprop ("ro.product.device") == "r800i" ......" this is copied with the endings r800i/a/at and zeus
E: Error in sd /sdcard/cm-9.1.0-zeus.zip
(Status 7)
Installation aborted.
I tried it a few times. Flashed cm 10 kernel, flashed cm9 kernel back, but its always the same failure notice. I would like to use cm9 again, it was good at all, but i wanted to update cm10 today. Please give me an how-to what to do unbricking my play.
Click to expand...
Click to collapse
If you're able to flash, you're not bricked. One thing is to make sure you are clearing data, cache and dalvik. That is often the root to the sort of issues you have had. My recommendation would be to find the correct ftf file for your model of Play and flash it back to stock. Get that working first, then go with CM10 if you like.
netizenmt said:
If you're able to flash, you're not bricked. One thing is to make sure you are clearing data, cache and dalvik. That is often the root to the sort of issues you have had. My recommendation would be to find the correct ftf file for your model of Play and flash it back to stock. Get that working first, then go with CM10 if you like.
Click to expand...
Click to collapse
i wiped cache n dalvik again now, but i cant install cm9. same failure notice as everytime
EDIT:
i tried flashing stock firmware. didnt worked. Log:
03/043/2013 12:43:39 - INFO - <- This level is successfully initialized
03/043/2013 12:43:40 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
03/043/2013 12:43:40 - INFO - You can drag and drop ftf files here to start flashing them
03/044/2013 12:44:01 - INFO - Device disconnected
03/044/2013 12:44:33 - INFO - Selected Xperia_Relock_bootloader.ftf
03/044/2013 12:44:33 - INFO - Preparing files for flashing
03/044/2013 12:44:34 - INFO - Please connect your device into flashmode.
03/044/2013 12:44:40 - INFO - Device connected in flash mode
03/044/2013 12:44:40 - INFO - Opening device for R/W
03/044/2013 12:44:41 - INFO - Reading device information
03/044/2013 12:44:41 - INFO - Phone ready for flashmode operations.
03/044/2013 12:44:41 - INFO - Start Flashing
03/044/2013 12:44:41 - INFO - Processing loader
03/044/2013 12:44:41 - INFO - Checking header
03/044/2013 12:44:41 - INFO - Flashing data
03/044/2013 12:44:44 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTED
03/044/2013 12:44:44 - INFO - Flashing preset.ta
03/044/2013 12:44:44 - INFO - Writing TA unit : [00, 00, 08, B2, 00, 00, 00, 02, 00, 00]
03/044/2013 12:44:44 - INFO - Ending flash session
03/044/2013 12:44:44 - INFO - Flashing finished.
03/044/2013 12:44:44 - INFO - Please unplug and start your phone
03/044/2013 12:44:44 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
03/044/2013 12:44:45 - INFO - Device connected in flash mode
03/044/2013 12:44:50 - INFO - Device disconnected
03/045/2013 12:45:01 - INFO - Selected Xperia Play_Release_Generic UK.ftf
03/045/2013 12:45:01 - INFO - Preparing files for flashing
03/045/2013 12:45:27 - INFO - Please connect your device into flashmode.
03/045/2013 12:45:34 - INFO - Device connected in flash mode
03/045/2013 12:45:35 - INFO - Opening device for R/W
03/045/2013 12:45:35 - INFO - Device connected in flash mode
03/045/2013 12:45:35 - INFO - Reading device information
03/045/2013 12:45:35 - INFO - Unable to read from phone after having opened it.
03/045/2013 12:45:35 - INFO - trying to continue anyway
03/045/2013 12:45:35 - INFO - Start Flashing
03/045/2013 12:45:35 - INFO - Processing loader
03/045/2013 12:45:35 - INFO - Checking header
03/045/2013 12:45:35 - INFO - Ending flash session
03/045/2013 12:45:35 - ERROR - Error in processHeader : 6 : Das Handle ist ungültig.
03/045/2013 12:45:35 - ERROR - Error flashing. Aborted
03/045/2013 12:45:36 - INFO - Device connected in flash mode
03/045/2013 12:45:44 - INFO - Flash canceled
first locked bootloader,second flashing stock rom
_hacker_ said:
i wiped cache n dalvik again now, but i cant install cm9. same failure notice as everytime
EDIT:
i tried flashing stock firmware. didnt worked. Log:
03/043/2013 12:43:39 - INFO - <- This level is successfully initialized
03/043/2013 12:43:40 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
03/043/2013 12:43:40 - INFO - You can drag and drop ftf files here to start flashing them
03/044/2013 12:44:01 - INFO - Device disconnected
03/044/2013 12:44:33 - INFO - Selected Xperia_Relock_bootloader.ftf
03/044/2013 12:44:33 - INFO - Preparing files for flashing
03/044/2013 12:44:34 - INFO - Please connect your device into flashmode.
03/044/2013 12:44:40 - INFO - Device connected in flash mode
03/044/2013 12:44:40 - INFO - Opening device for R/W
03/044/2013 12:44:41 - INFO - Reading device information
03/044/2013 12:44:41 - INFO - Phone ready for flashmode operations.
03/044/2013 12:44:41 - INFO - Start Flashing
03/044/2013 12:44:41 - INFO - Processing loader
03/044/2013 12:44:41 - INFO - Checking header
03/044/2013 12:44:41 - INFO - Flashing data
03/044/2013 12:44:44 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTED
03/044/2013 12:44:44 - INFO - Flashing preset.ta
03/044/2013 12:44:44 - INFO - Writing TA unit : [00, 00, 08, B2, 00, 00, 00, 02, 00, 00]
03/044/2013 12:44:44 - INFO - Ending flash session
03/044/2013 12:44:44 - INFO - Flashing finished.
03/044/2013 12:44:44 - INFO - Please unplug and start your phone
03/044/2013 12:44:44 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
03/044/2013 12:44:45 - INFO - Device connected in flash mode
03/044/2013 12:44:50 - INFO - Device disconnected
03/045/2013 12:45:01 - INFO - Selected Xperia Play_Release_Generic UK.ftf
03/045/2013 12:45:01 - INFO - Preparing files for flashing
03/045/2013 12:45:27 - INFO - Please connect your device into flashmode.
03/045/2013 12:45:34 - INFO - Device connected in flash mode
03/045/2013 12:45:35 - INFO - Opening device for R/W
03/045/2013 12:45:35 - INFO - Device connected in flash mode
03/045/2013 12:45:35 - INFO - Reading device information
03/045/2013 12:45:35 - INFO - Unable to read from phone after having opened it.
03/045/2013 12:45:35 - INFO - trying to continue anyway
03/045/2013 12:45:35 - INFO - Start Flashing
03/045/2013 12:45:35 - INFO - Processing loader
03/045/2013 12:45:35 - INFO - Checking header
03/045/2013 12:45:35 - INFO - Ending flash session
03/045/2013 12:45:35 - ERROR - Error in processHeader : 6 : Das Handle ist ungültig.
03/045/2013 12:45:35 - ERROR - Error flashing. Aborted
03/045/2013 12:45:36 - INFO - Device connected in flash mode
03/045/2013 12:45:44 - INFO - Flash canceled
first locked bootloader,second flashing stock rom
Click to expand...
Click to collapse
Hi I think you are flashing wrong file line 5 (03/044/2013 12:44:33 - INFO - Selected Xperia_Relock_bootloader.ftf) you need a stock ftf file!
I have used R800i_4.0.2.A.0.62_phoenixvendor.ftf file before found on this site somewhere might be wrong but would try flashing that file hope it helps.:fingers-crossed:
There is a ftf collection here: http://forum.xda-developers.com/showthread.php?t=1589399
tallman43 said:
Hi I think you are flashing wrong file line 5 (03/044/2013 12:44:33 - INFO - Selected Xperia_Relock_bootloader.ftf) you need a stock ftf file!
I have used R800i_4.0.2.A.0.62_phoenixvendor.ftf file before found on this site somewhere might be wrong but would try flashing that file hope it helps.:fingers-crossed:
Click to expand...
Click to collapse
Cosmicdan's R800i_4.0.2.A.0.62_phoenixvendor.ftf link kere: http://forum.xda-developers.com/showthread.php?t=1817548
Scroll down to the downloads section.
thanks for that information, but i tried flashing 2 files, at first the relock bootloader ftf. because i read somewhere that flashing firmware with open botloader with "OTA" will brick your phone. so i wanted to be save and locked bl before flashing firmware. if you read on into log there is another ftf. and a failure notice. because i tried today so many things, my accu is fully empty (3 times red led blinking) so i hope itll load a bit tonight and i can go on trying to flash cm 9 tomorrow again. but this file should be stock firmware isnt it?: 03/045/2013 12:45:01 - INFO - Selected Xperia Play_Release_Generic UK.ftf
its from uk, im from germany, but only want to boot once and than flash cm9, so i dont worry bout that. last flahing try come further than log posted already i think. ill try flashing that file tomorrow again, cause i think that flashing failed cause of battery was too low.
log of last try:
04/035/2013 09:35:58 - INFO - Device connected in flash mode
04/036/2013 09:36:12 - INFO - Selected R800i_4.0.2.A.0.62_(1253-4437).ftf
04/036/2013 09:36:12 - INFO - Preparing files for flashing
04/036/2013 09:36:40 - INFO - Device disconnected
04/036/2013 09:36:45 - INFO - Device connected in flash mode
04/037/2013 09:37:04 - INFO - Please connect your device into flashmode.
04/037/2013 09:37:05 - INFO - Opening device for R/W
04/037/2013 09:37:05 - INFO - Reading device information
04/037/2013 09:37:05 - INFO - Phone ready for flashmode operations.
04/037/2013 09:37:05 - INFO - Start Flashing
04/037/2013 09:37:05 - INFO - Processing loader
04/037/2013 09:37:05 - INFO - Checking header
04/037/2013 09:37:05 - INFO - Flashing data
04/037/2013 09:37:08 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
04/037/2013 09:37:08 - WARN - This file is ignored : simlock.ta
04/037/2013 09:37:08 - INFO - Processing kernel.sin
04/037/2013 09:37:08 - INFO - Checking header
04/037/2013 09:37:08 - INFO - Flashing data
04/044/2013 09:44:23 - INFO - Processing fota1.sin
04/044/2013 09:44:23 - INFO - Checking header
04/044/2013 09:44:23 - INFO - Flashing data
04/044/2013 09:44:24 - INFO - Processing fota0.sin
04/044/2013 09:44:24 - INFO - Checking header
04/044/2013 09:44:24 - INFO - Flashing data
04/044/2013 09:44:28 - INFO - Processing adsp.sin
04/044/2013 09:44:28 - INFO - Checking header
04/044/2013 09:44:28 - INFO - Flashing data
04/046/2013 09:46:51 - INFO - Processing amss_fs.sin
04/046/2013 09:46:51 - INFO - Checking header
04/046/2013 09:46:51 - INFO - Flashing data
04/046/2013 09:46:51 - INFO - Processing amss.sin
04/046/2013 09:46:51 - INFO - Checking header
04/046/2013 09:46:51 - INFO - Flashing data
04/036/2013 12:36:58 - INFO - Ending flash session
04/036/2013 12:36:58 - ERROR - 31 : one connected device doesnt functions.
04/036/2013 12:36:58 - ERROR - Error flashing. Aborted
04/036/2013 12:36:59 - INFO - Device disconnected
(i translated error 31, cuz of it was originaly in german)
I'm sure as long as the led works theres life in it
Maybe battery dead
Sent from my R800i using xda app-developers app
Strange but true, the dreaded red light of death. To fix it u will need a spare micro usb.
→ Cut micro usb on the micro end.
→ Strip back the plastic to expose wires black(negative) red(positive)
→ get sticky tape an connect it to the positive and negative terminals on battery(they are marked)
→ plug it in to wall socket
→ 3hours or so battery should be ready to go
→ phone SHOULD boot normally
Its happened to me and one of my mates. Both our devices fixed this way, but up to u if u want to take the chance of ruining a micro usb
Sent from my GT-I9300 On Official JB
thats a strange way of loading battery. Luckily if got 2 usb cabels for my play, so ill give it a try. but my phone wont boot after doeing this, it will only give me the chance to try to repair it. an mobile without working rom wont boot i think. its unlogical that i cant load a phone without an working rom. i hope i dont make me crunchy if i connect microusb with electricity.
_hacker_ said:
thats a strange way of loading battery. Luckily if got 2 usb cabels for my play, so ill give it a try. but my phone wont boot after doeing this, it will only give me the chance to try to repair it. an mobile without working rom wont boot i think. its unlogical that i cant load a phone without an working rom. i hope i dont make me crunchy if i connect microusb with electricity.
Click to expand...
Click to collapse
Ok goodstuff, just be careful and dont plug phone in untill u have the sticky tape on the battery. When your phone has enough battery then u can flash the ftf via flashtool
Sent from my GT-I9300 On Official JB
there are 4 cabels in my usb cabel, one is red, one black, one green and one gray/white and many metalstripes around them. do i have to connect the green and grey one also, or only the other both?
Off-topic:
how long do i have to do the image verification before i can answer?
EDIT:
i hope i did it right, ill see if i did it or not in a few hours. big thanks to all of you, i hope my play will boot soon
edit 2:
looks good, no explosion yet
_hacker_ said:
there are 4 cabels in my usb cabel, one is red, one black, one green and one gray/white and many metalstripes around them. do i have to connect the green and grey one also, or only the other both?
Off-topic:
how long do i have to do the image verification before i can answer?
EDIT:
i hope i did it right, ill see if i did it or not in a few hours. big thanks to all of you, i hope my play will boot soon
edit 2:
looks good, no explosion yet
Click to expand...
Click to collapse
Good luck! By the way don't think you needed to have the battery in the phone to charge that way?Might damage phone more! Back to original problem can you get into recovery?(once battery full lol) if you can daft question but are you flashing cm9 from zip on sd card?Also can you flash other kernel's with fastboot ,DoomLords,Lupus,etc if you can try some of these and rom's to go with them.Get your phone stable with a rom before trying cm9/10 again.Also don't worry about locking your bootloader again as long as you do not update over the air you will be fine.I think your problems started when you tried to lock your bootloader again.:fingers-crossed:
Ye looks good but u dont needto have battery connected into phone as its the battery your charging.
Let me know how it goes
Sent from my GT-I9300 On Official JB
wedgess said:
Ye looks good but u dont needto have battery connected into phone as its the battery your charging.
Let me know how it goes
Sent from my GT-I9300 On Official JB
Click to expand...
Click to collapse
battery isnt connected to phone, its only laying into
EDIT:
@tallman, thanks, i hope i wont damage all
i flashed kernel and came into bootloader, but it showed failure notice i posted on first page of thread.
i hope i can flash stock firmware with full battery. after that ill try to flash cm9 again.
and yes, originally nonbooting was due to relocked bootloader
Edit2:
didnt worked, 3 red leds are there again. i think the cabels, especially the - cabel hadnt enough contact with the battery. do anyone know any tricks doing this better?
Edit3:
i cut now more of the isolation of the red and black cable away, so that i have more metalcabel to fix it on the battery. lets see if it loads now
If that don't work you can always buy a battery
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
crazymonkey05 said:
If that don't work you can always buy a battery
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
i dont wanna buy a new battery if theres any other way.
maybe that would work: Sony Ericsson EP900
problem is that i cant find it anywhere. its on amazon, but its not available. buying a new battery isnt a problem itself, but i would like to buy it at a store, not via internet. and i cant find an market where i can buy an battery for xplay
Edit:
i hope it works now. i couldnt fix the cabels on the battery contacts with tape. now i pressed them onto the contacts and pushed battery into my phone. so theres an constant pressure and it loads hopefully
Weird I had same flashtool error the other day but it while flashing phoenix ftf and seemed to still be working, wonder if it windows 8 causing issues for me, different version of flashtool?
Sent from my R800i using Tapatalk 2
fma965 said:
Weird I had same flashtool error the other day but it while flashing phoenix ftf and seemed to still be working, wonder if it windows 8 causing issues for me, different version of flashtool?
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
ive got win 7, and what version of flashtool do u have? i hope i can flash stock firmware today. Yesterday i couldnt do that because flash- and fastboot modes were only stable for 20 seconds or so, after this time green/blue led expired and my phone didnt showed any action
EDIT:
i think battery charged now, but i think also that i cut the wrong micro usbcable. one is thin and long, one is thick and big. i cut the short one because i thought they are the same cable. now my netbook doesnt installs the drivers for the cable, it only says "unknown device". with the other cable that i cut it worked. so ill have to buy a new cable and a new battery if i can find them anywhere. i hope ill be able to go to the nearest city where i can buy one. this will take some time because im living far away of next city, and my mother, wich drives there at least once a week is sick at the moment. so i havent got the opportunity to buy one the next few days :-c
Edit 2:
i got an new usb cable now. i was able to unlock bootloader and flash cm9kernel. now im trying to flash stock firmware just to make sure that my phone still works normally. than ill try to flash cm9 completely
Edit3:
cm9 runs now. great! bit i cant write anything with the virtual keyboard, and an phone without keyboard is completely useless. can anyone help me making the keyboard opening?
last edit:
the bug that my keyboard didnt opened was because i installed the wrong gapps. i installed jelly bean gapps, with ics gapps all works perfect
for returning to CM 9
_hacker_ said:
Hi,
plz help me make my phone working again. I wanted to flash cm 10 after manged to flash cm9. cm 9 ran after trying everything out for hours. Today i downloaded cm10 and flashed the kernel. after that i wasnt able to open the bootloader, so i flashed cm9 kernel again. That worked so far. i was able to open bootloader again, but it showed an failure notice whilst installing cm 9.
"assert failed: getprop ("ro.product.device") == "r800i" ......" this is copied with the endings r800i/a/at and zeus
E: Error in sd /sdcard/cm-9.1.0-zeus.zip
(Status 7)
Installation aborted.
I tried it a few times. Flashed cm 10 kernel, flashed cm9 kernel back, but its always the same failure notice. I would like to use cm9 again, it was good at all, but i wanted to update cm10 today. Please give me an how-to what to do unbricking my play.
Click to expand...
Click to collapse
I think you are very new to mod world and suggest you that first know the terminology of mobile developing fully like kernel, ROM, bootloader, factory (or Stock ROM) , baseband, android versions, custom ROM, what CM is actually etc etc before trying to kill ur phone!!!!(joking)...
same happened to me before a few days on my xperia play R800i phone but I was successful in restoring it back to CM 9.1.0 after unsuccessful try of restoring it to factory(Stock) ROM that came with it from sonyericsson.
Though there are many more experienced memebers but try mine at least once no harm...
1. make sure ur battery is full or 70% at least
2. put the CM9 ROM u downloaded in SD card in home directory(home means just put inside SD without making any folder on SD card)
3. enter into recovry mode (i assume you have clockworkmod recovery already installed)
4.do factory wipe/reset and then cache wipe
5.do dalvik cache wipe (u can do step 4 & 5 one or two times just to be in safe side)
6.install zip file CM9 (make sure you have stable version only) from SD card
7. reboot phone
I hope you should be successful now step 4 & 5 is important to wipe any mess that was created by CM10 if not successful then move the battery from phone wait for about 2-3 minutes and try again above steps u should succeed. good luck!!
So here's what I did so far... The bootloader was unlocked, so I rooted the phone, installed clockwork. I spent hours reading about kernels and the different roms but wasn' really getting anywhere. Since my phone needed to be taken to get repaired anyway I decided to just choose a rom and install it from the guide i was using.
I backed up using clockwork, formatted and installed, and it said it was fine. But when I reboot it just hangs on the Sony Ericsson screen, have to take battery out to turn it off....what can I do now? I can't load the backup image because it won't let me load clockwork. did this happen because I didn't install a custom kernel first?
renvaar said:
So here's what I did so far... The bootloader was unlocked, so I rooted the phone, installed clockwork. I spent hours reading about kernels and the different roms but wasn' really getting anywhere. Since my phone needed to be taken to get repaired anyway I decided to just choose a rom and install it from the guide i was using.
I backed up using clockwork, formatted and installed, and it said it was fine. But when I reboot it just hangs on the Sony Ericsson screen, have to take battery out to turn it off....what can I do now? I can't load the backup image because it won't let me load clockwork. did this happen because I didn't install a custom kernel first?
Click to expand...
Click to collapse
flash another kernel (supported for your rom always)
boot on cwm
factory reset
mounts and storage > format system
advanced > wipe dalvik cache
advanced > wipe battery stats
flash your desirable rom, flash wifi modules and try again fresh
renvaar said:
So here's what I did so far... The bootloader was unlocked, so I rooted the phone, installed clockwork. I spent hours reading about kernels and the different roms but wasn' really getting anywhere. Since my phone needed to be taken to get repaired anyway I decided to just choose a rom and install it from the guide i was using.
I backed up using clockwork, formatted and installed, and it said it was fine. But when I reboot it just hangs on the Sony Ericsson screen, have to take battery out to turn it off....what can I do now? I can't load the backup image because it won't let me load clockwork. did this happen because I didn't install a custom kernel first?
Click to expand...
Click to collapse
Your kernel is stock and bootloader locked? If so then download pc companion and do a repair and if your bootloader is unlocked then download a stock ftf file for your phone and flash it with flashtool. I had exactly same problem with flashing custom firmwares on my Arc s but after few tries I realized that i need to format every partition excluding sdcard in a "mounts and storage" sub-menu.
---------- Post added at 11:31 AM ---------- Previous post was at 11:29 AM ----------
Retrosid said:
flash another kernel (supported for your rom always)
boot on cwm
factory reset
mounts and storage > format system
advanced > wipe dalvik cache
advanced > wipe battery stats
flash your desirable rom, flash wifi modules and try again fresh
Click to expand...
Click to collapse
I think his bootloader is locked because he lost a recovery after flashing new rom. His CWM was probably installed with x-parts.
as I said... it wont let me go as far as being able to load up clockwork...
thanks pypcier, I'm trying flashtool now... but I get this error...
18/036/2013 18:36:40 - INFO - Device disconnected
18/036/2013 18:36:53 - INFO - Device connected in flash mode
18/037/2013 18:37:03 - INFO - Selected LT15i_4.0.2.A.0.42_Generic Global.ftf
18/037/2013 18:37:03 - INFO - Preparing files for flashing
18/037/2013 18:37:03 - INFO - Please connect your device into flashmode.
18/037/2013 18:37:03 - INFO - Opening device for R/W
18/037/2013 18:37:03 - INFO - Reading device information
18/037/2013 18:37:03 - INFO - Phone ready for flashmode operations.
18/037/2013 18:37:03 - INFO - Current device : LT15i - CB5A1FEFCM - 1247-1061_R7D - 1241-4324_4.0.2.A.0.42 - WORLD-1-8_4.0.2.A.0.42
18/037/2013 18:37:03 - INFO - Start Flashing
18/037/2013 18:37:03 - INFO - Processing loader
18/037/2013 18:37:03 - INFO - Checking header
18/037/2013 18:37:03 - INFO - Ending flash session
18/037/2013 18:37:03 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Can you tick a "no final verification" box and try again?
it changes to this if i check the button...
18/052/2013 18:52:28 - INFO - Selected LT15i_4.0.2.A.0.42_Generic Global.ftf
18/052/2013 18:52:28 - INFO - Preparing files for flashing
18/052/2013 18:52:28 - INFO - Please connect your device into flashmode.
18/052/2013 18:52:29 - INFO - Opening device for R/W
18/052/2013 18:52:29 - INFO - Reading device information
18/052/2013 18:52:45 - INFO - Unable to read from phone after having opened it.
18/052/2013 18:52:45 - INFO - trying to continue anyway
18/052/2013 18:52:45 - INFO - Start Flashing
18/052/2013 18:52:45 - INFO - Processing loader
18/052/2013 18:52:45 - INFO - Checking header
18/052/2013 18:52:45 - INFO - Ending flash session
18/052/2013 18:52:45 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
18/052/2013 18:52:45 - ERROR - Error flashing. Aborted
18/052/2013 18:52:45 - INFO - Device disconnected
EDIT: it did that the first time, then i try the same way again and it gives me the previous error. would an older ftf make a difference?
You are sure that your bootloader is unlocked? Have you ever flashed a custom kernel using fastboot? If yes then try to flash custom kernel with recovery. If this wont help then try to update and reinstall your flashtool and download newest stock ftf for your phone.
I'm pretty sure it is, as I remember having a similar problem a long time ago and flashing it. problem is I don't have the old files i used before, and I can't find any downloads that work in my country..
Error code from your flashtool log looks like there is a problem with acquiring permission to flash a firmware and that suggests that your bootloader is locked. Try to download pc companion from sony site and do a repair. If your bootloader is locked this will restore your phone to stock and if your bootloader is unlocked then pcc wont recognize your phone.
just tried pc companion. it asks me to swipe the bar down, but as I can't get past the logo it wont work. so repair just hangs there...
What bar... I don't understand what you are talking about. For a repair with pc companion you don't even need to turn on your phone you just click update button and then small blue "repair" text in a popup window then firmware is downloaded and you are asked to turn off your phone and connect usb cable while holding a back button.
I found your previous thread and It looks like your bootloader is unlocked because OTA update bricked your phone. I have a link to a ftf you used last time to repair your phone http://forum.xda-developers.com/showthread.php?t=1324707 (its inside of this archive with complete but outdated flashtool and drivers) but you should try a pcc first so we will be sure if your bootloader is locked or not.
renvaar said:
just tried pc companion. it asks me to swipe the bar down, but as I can't get past the logo it wont work. so repair just hangs there...
Click to expand...
Click to collapse
Use this http://developer.sonymobile.com/201...ocked-xperia-smartphones-video-beta-download/ if your bootloader is unlocked it will return it to stock if it does not connect it means your bootloader is locked.It is a new beta tool from sony for the arc:good:
tallman43 said:
Use this http://developer.sonymobile.com/201...ocked-xperia-smartphones-video-beta-download/ if your bootloader is unlocked it will return it to stock if it does not connect it means your bootloader is locked.It is a new beta tool from sony for the arc:good:
Click to expand...
Click to collapse
Wow its great I hadn't heard of this before.
pypcier said:
Wow its great I didn't heard of this before.
Click to expand...
Click to collapse
Yep it's a good tool to return to stock and also to check if your bootloader is unlocked (Because it only works on unlocked bootloaders) Arc & couple other devices are supported but they are going to make more devices available:good:
pypcier said:
Wow its great I hadn't heard of this before.
Click to expand...
Click to collapse
You would have had you browsed the stickys.
XperienceD said:
You would have had you browsed the stickys.
Click to expand...
Click to collapse
I'm not going to read through every new sticky just to make you happy.
pypcier said:
I'm not going to read through every new sticky just to make you happy.
Click to expand...
Click to collapse
Mines been there while, and People shouldn't read them to please anyone, they should read them, especially when new, to LEARN.
Sent from Myushi
I had a problem when I flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2573345
I think that I did something wrong (I wiped data and installed the rom) but now the device doesn't turn on, only vibrates when you push tue on/off button and if you try to do hard reset vibrates one and later three times, but the screen doesn't turn on either.
When you connect the device to the computer the Xperia turns on the green led, like it was charging. I've tried to recover it with the SEUS software but it says me that the Xperia is updated.
Can you help me? :/
Thanks
Edit: I've tried with flashtool and it seems to be the same.
Jufercar said:
I had a problem when I flashed this ROM: http://forum.xda-developers.com/show....php?t=2573345
I think that I did something wrong (I wiped data and installed the rom) but now the device doesn't turn on, only vibrates when you push tue on/off button and if you try to do hard reset vibrates one and later three times, but the screen doesn't turn on either.
When you connect the device to the computer the Xperia turns on the green led, like it was charging. I've tried to recover it with the SEUS software but it says me that the Xperia is updated.
Can you help me? :/
Thanks
Click to expand...
Click to collapse
The link is wrong I guess. Do mention the details of ROM. Try flashing the stock ftf by flashmode using flashtool.
Mirhawk said:
The link is wrong I guess. Do mention the details of ROM. Try flashing the stock ftf by flashmode using flashtool.
Click to expand...
Click to collapse
Hi, I've done that yet, and here are the results:
16/005/2014 16:05:32 - INFO - Device connected in flash mode
16/005/2014 16:05:35 - INFO - Please connect your device into flashmode.
16/005/2014 16:05:36 - INFO - Opening device for R/W
16/005/2014 16:05:36 - INFO - Reading device information
16/005/2014 16:05:36 - INFO - Phone ready for flashmode operations.
16/005/2014 16:05:36 - INFO - Current device : Unknown: Apr 27 2013/00:42:21 - BX903DCY90 - Unknown: Apr 27 2013/00:42:21 - Unknown: Apr 27 2013/00:42:21 - Unknown: Apr 27 2013/00:42:21
16/005/2014 16:05:52 - INFO - Processing loader.sin
16/005/2014 16:05:52 - INFO - Checking header
16/005/2014 16:05:52 - INFO - Flashing data
16/005/2014 16:05:53 - INFO - Processing of loader.sin finished.
16/005/2014 16:05:54 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Boot version : R10C008 / Bootloader status : NOT_ROOTABLE
16/005/2014 16:05:54 - INFO - Start Reading unit 000008B2
16/005/2014 16:05:54 - INFO - Reading TA finished.
16/005/2014 16:05:55 - INFO - Ending flash session
16/005/2014 16:05:55 - INFO - Your phone bootloader cannot be officially unlocked
16/005/2014 16:05:55 - INFO - You can now unplug and restart your phone
16/005/2014 16:05:55 - INFO - Device connected in flash mode
16/005/2014 16:05:56 - INFO - Device disconnected
16/005/2014 16:05:59 - INFO - Device connected in flash mode
16/006/2014 16:06:10 - INFO - Device disconnected
Click to expand...
Click to collapse
The device stills "death", like I've said you can charge it or try to turn on it but only answers with vibrations.
Hi you can flash this ROM XperiaS_LT26i_6.2.B.1.96_1257-6919.ftf
Jufercar said:
Hi, I've done that yet, and here are the results:
The device stills "death", like I've said you can charge it or try to turn on it but only answers with vibrations.
Click to expand...
Click to collapse
Hi
Greetings.!
Your device will work, if you flash this ROM XperiaS_LT26i_6.2.B.1.96_1257-6919.ftf, Search it in Google and download the zip file
2. Unzip it
3. copy the .ftf and past it in folder C:\Flashtool ver 0.9.11.0\firmwares
4. Flash...
5. Your device will work nicely..
6. Thanks.!
vmgs2006 said:
Hi
Greetings.!
Your device will work, if you flash this ROM XperiaS_LT26i_6.2.B.1.96_1257-6919.ftf, Search it in Google and download the zip file
2. Unzip it
3. copy the .ftf and past it in folder C:\Flashtool ver 0.9.11.0\firmwares
4. Flash...
5. Your device will work nicely..
6. Thanks.!
Click to expand...
Click to collapse
GREAT! Does it work! But the phone doesn't start, it's everytime playing that waves of colour... I flashed other .ftf archive, but I'll try to download that one that you've said. Thank you so much, now I could say that my phone is alive
EDIT: I answer very fast... HAHAHAH. My phone works correctly. Love ya ;D
Very Good job done, you have saved your device..
Jufercar said:
GREAT! Does it work! But the phone doesn't start, it's everytime playing that waves of colour... I flashed other .ftf archive, but I'll try to download that one that you've said. Thank you so much, now I could say that my phone is alive
EDIT: I answer very fast... HAHAHAH. My phone works correctly. Love ya ;D
Click to expand...
Click to collapse
Hi.!
Very Good Job done, You have saved your device..
After flashing the ...98.ftf file, color waves come, first boot takes more time, wait.. your phone works Great.!
Thanks.!
Jufercar said:
Hi, I've done that yet, and here are the results:
The device stills "death", like I've said you can charge it or try to turn on it but only answers with vibrations.
Click to expand...
Click to collapse
I think You are flashing a bootloader unlocked ftf. Try flashing the proper stock firmware(not rooted and bootloader unlocked) as the one mentioned by the other user, and it will work.
Hello guys;
I have a big problem with my xperia arc s lt18i (one of my cousin to be clear), with unlocked bootloader
1) When flashing a stock rom with flash tool, the phone stuck at logo after rebooting
2) When flashing a custom rom, the phone stuck at airplane mode even if the airplane mode is off. There's no signal network and when i try to make a call, it's asking me to leave airplane mode before making a call.
I'v search all the forum and internet, try different custom rom, from cm7 to kitkat but still with the same problem.
How can i fix this ? :crying::crying:
Rodney SANK said:
Hello guys;
I have a big problem with my xperia arc s lt18i (one of my cousin to be clear), with unlocked bootloader
1) When flashing a stock rom with flash tool, the phone stuck at logo after rebooting
2) When flashing a custom rom, the phone stuck at airplane mode even if the airplane mode is off. There's no signal network and when i try to make a call, it's asking me to leave airplane mode before making a call.
I'v search all the forum and internet, try different custom rom, from cm7 to kitkat but still with the same problem.
How can i fix this ? :crying::crying:
Click to expand...
Click to collapse
Flash stock rom and stock kernel, relock bootloader, and try to repair it with pc companion
electrash said:
Flash stock rom and stock kernel, relock bootloader, and try to repair it with pc companion
Click to expand...
Click to collapse
Thank's Electrash for answering. I've try the method given in your guide to relock the bootloader with Blagus ftf file but it's not working (http://forum.xda-developers.com/showthread.php?t=1324703)
I've not found another way to relock the bootloader.
Rodney SANK said:
Thank's Electrash for answering. I've try the method given in your guide to relock the bootloader with Blagus ftf file but it's not working (http://forum.xda-developers.com/showthread.php?t=1324703)
I've not found another way to relock the bootloader.
Click to expand...
Click to collapse
Please, post flashtool log of process when you try to flash bl relock file.
1897
electrash said:
Please, post flashtool log of process when you try to flash bl relock file.
Click to expand...
Click to collapse
Here's is the log
05/050/2014 03:50:19 - INFO - Device disconnected
05/050/2014 03:50:34 - INFO - Selected Bundle for Xperia. FW release : Relock_bootloader. Customization : v1
05/050/2014 03:50:34 - INFO - Preparing files for flashing
05/050/2014 03:50:34 - INFO - Please connect your device into flashmode.
05/050/2014 03:50:41 - INFO - Device connected in flash mode
05/050/2014 03:50:41 - INFO - Opening device for R/W
05/050/2014 03:50:41 - INFO - Reading device information
05/050/2014 03:50:42 - INFO - Phone ready for flashmode operations.
05/050/2014 03:50:42 - INFO - Current device : LT18i - CB5A1HNQHD - 1254-8596_R1I - 1253-8238_4.1.B.0.587 - WORLD-i_4.1.B.0.587
05/050/2014 03:50:42 - INFO - Start Flashing
05/050/2014 03:50:42 - INFO - Using an unofficial loader
05/050/2014 03:50:42 - INFO - Device loader has not been identified. Using the one from the bundle
05/050/2014 03:50:42 - INFO - Processing loader.sin
05/050/2014 03:50:42 - INFO - Checking header
05/050/2014 03:50:42 - INFO - Flashing data
05/050/2014 03:50:42 - INFO - Processing of loader.sin finished.
05/050/2014 03:50:44 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Boot version : r9A029 / Bootloader status : ROOTED
05/050/2014 03:50:44 - INFO - No bootdelivery to send
05/050/2014 03:50:44 - INFO - Flashing preset.ta
05/050/2014 03:50:44 - INFO - Writing TA unit : [00, 00, 08, B2, 00, 00, 00, 02, 00, 00]
05/050/2014 03:50:44 - INFO - Ending flash session
05/050/2014 03:50:44 - INFO - Flashing finished.
05/050/2014 03:50:45 - INFO - Please unplug and start your phone
05/050/2014 03:50:45 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
05/050/2014 03:50:45 - INFO - Device connected in flash mode
05/051/2014 03:51:00 - INFO - Device disconnected
05/009/2014 04:09:06 - INFO - Device connected with USB debugging on
Thank you for sharing. I will try to ask someone if they know what is the problem.
As i see, everything went good.
electrash said:
Thank you for sharing. I will try to ask someone if they know what is the problem.
As i see, everything went good.
Click to expand...
Click to collapse
I just found out that it is written ""au by KDDI is11s" on the back cover of the phone. After some search on the net, i discover that this phone is an xperia acro is11s branded for a japan network.
If then, am i using the bad stok files for flashing it ? why is it written Lt18i under the batterry place ?
I also found this thread about someone having the same problem (sorry, didn't saw that before) http://forum.xda-developers.com/gen...lease-help-t2885229/post55617937#post55617937
I'll try to flash the rom given in the site that was suggested to him and give you the result later.
i have found the solution. It's was given in this thread by at0607 http://forum.xda-developers.com/showpost.php?p=49388077&postcount=18
Step to get your IS11S function fully but 3G (EDGE is OK):
1. Unlock your phone: you will need some money.
2. Download "IS11S_4.0.1.B.0.112_KDDI.ftf" & "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version (google them).
3. Open "IS11S_4.0.1.B.0.112_KDDI.ftf" with 7-zip and extract "loader.sin" & "amss_fs.sin".
4. Open "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version with 7-zip and move "loader.sin" & "amss_fs.sin" into it. Delete "amss_fs_ayame.sin".
5. Flash edited "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version by Flashtool (mine is 0.8.5.0).
I just used differents files :
1. Already have an unlocked phone
2. Used "4.0.1.B.0.118.ftf" file avaible here (https://s.basketbuild.com/filedl/devs?dev=AndroPlus&dl=AndroPlus/IS11S_4.0.1.B.0.118_au.ftf) and Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf avaible here (
3. Opened "4.0.1.B.0.118.ftf" with 7-zip and extract "loader.sin" & "amss_fs_akane.sin".
4. Opened "Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf" and move "loader.sin" & "amss_fs_akane.sin" into it. Deleted "amss_fs_ayame.sin" and simlock.ta.
5. Flashed this changed Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf with flash tool and youpi.
My phone is fully functionnal with ICS. :laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Thank's guy for your patiente. I didn't forget to thank at0607 for his fabulous solution.
How to do for adding "Solved" to the thread title ?
queation
Rodney SANK said:
i have found the solution. It's was given in this thread by at0607 http://forum.xda-developers.com/showpost.php?p=49388077&postcount=18
Step to get your IS11S function fully but 3G (EDGE is OK):
1. Unlock your phone: you will need some money.
2. Download "IS11S_4.0.1.B.0.112_KDDI.ftf" & "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version (google them).
3. Open "IS11S_4.0.1.B.0.112_KDDI.ftf" with 7-zip and extract "loader.sin" & "amss_fs.sin".
4. Open "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version with 7-zip and move "loader.sin" & "amss_fs.sin" into it. Delete "amss_fs_ayame.sin".
5. Flash edited "LT18i_4.1.B.0.587_(1254-2184).ftf" or Gingerbread version by Flashtool (mine is 0.8.5.0).
I just used differents files :
1. Already have an unlocked phone
2. Used "4.0.1.B.0.118.ftf" file avaible here (https://s.basketbuild.com/filedl/devs?dev=AndroPlus&dl=AndroPlus/IS11S_4.0.1.B.0.118_au.ftf) and Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf avaible here (
3. Opened "4.0.1.B.0.118.ftf" with 7-zip and extract "loader.sin" & "amss_fs_akane.sin".
4. Opened "Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf" and move "loader.sin" & "amss_fs_akane.sin" into it. Deleted "amss_fs_ayame.sin" and simlock.ta.
5. Flashed this changed Lt18i_4.1.B.0.587_1254-8596_Generic_India.ftf with flash tool and youpi.
My phone is fully functionnal with ICS. :laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Thank's guy for your patiente. I didn't forget to thank at0607 for his fabulous solution.
Click to expand...
Click to collapse
how to unlock my phone? please show me how you had unlocked your phone
hussam2020 said:
how to unlock my phone? please show me how you had unlocked your phone
Click to expand...
Click to collapse
I don't know how to do it, the phone was already unlocked when my cousin gave it to me. Just search the forum.
UPD: same fix for Xperia L (C2105)
Some phones (I mean only Xperia M of course) for unknown reason can't enter to Flashmode (Vol Down + USB)
This mode obliviously required to flash stock ROM via Flashtool / PC Companion / SEUS
When try to enter it phone just won't connect. But phone itself works fine (can boot).
Yeah, there is stock CWM-backups, but anyway broken mode is not good.
I did some research with user that had this problem and found cause.
Somehow 4th partition (s1sbl2) contain wrong data – it mismatch with OK phone.
Seems there stored loader for dealing with flashing.
After restoring good partition dump Flashmode works!
This helped 2 people, so I want to share this widely.
Do it on your own risk.
If you have custom recovery (CWM / TWRP)
1. Download attached ZIP
2. Copy it somewhere on phone
3. Flash it via recovery like any other ZIP
If you have only root
0. Not rooted? Use Towelroot for 4.3
1. Download attached file 1.img
2. Copy it into root of internal storage
3. Install app Terminal Emulator
4. Launch it and enter su
5. Allow root access
6. Carefully enter this (at the end not number 12, there small L and 2):
Code:
dd if=/sdcard/1.img of=/dev/block/platform/msm_sdcc.1/by-name/s1sbl2
i have this promblem where the green only blink once how can i fix it cause im already stucked at sony logo
nikko3214123 said:
how can i fix it cause im already stucked at sony logo
Click to expand...
Click to collapse
1. Copy that ZIP with fix to sdcard via cardreader
2. Unlock bootloader (required only fastboot, Google for tutorial)
3. Install via fastboot kernel with CWM (link in post)
4. Enter CWM: at Sony logo & purple LED press Vol Up (or Down?)
5. Flash that ZIP
6. Now flash stock ROM via Flashtool
Note: all your data on phone including internal storage will be erased (twice)
Please, write here about result.
Bonoboo said:
1. Copy that ZIP with fix to sdcard via cardreader
2. Unlock bootloader (required only fastboot, Google for tutorial)
3. Install via fastboot kernel with CWM (link in post)
4. Enter CWM: at Sony logo & purple LED press Vol Up (or Down?)
5. Flash that ZIP
6. Now flash stock ROM via Flashtool
Note: all your data on phone including internal storage will be erased (twice)
Please, write here about result.
Click to expand...
Click to collapse
sir i dont have cwm on the phone is there any way to fix this? thanks for the quick response
nikko3214 said:
i dont have cwm on the phone is there any way to fix this?
Click to expand...
Click to collapse
No.
You need install CWM via fastboot after unlocking bootloader.
I already described this.
Bonoboo said:
No.
You need install CWM via fastboot after unlocking bootloader.
I already described this.
Click to expand...
Click to collapse
im stucked at < waiting for device > my phone is already on fastboot mode
---------- Post added at 10:18 AM ---------- Previous post was at 10:04 AM ----------
and im having trouble with flashtool it says
13/016/2015 18:16:29 - INFO - Current device : C1905 - YT910HYWCB - 1274-5438_R3A - 1272-2325_15.1.C.1.17 - WORLD-i_15.1.C.1.17
13/016/2015 18:16:29 - INFO - Start Flashing
13/016/2015 18:16:29 - INFO - Processing loader.sin
13/016/2015 18:16:29 - INFO - Checking header
13/016/2015 18:16:29 - INFO - Flashing data
13/016/2015 18:16:29 - INFO - Processing of loader.sin finished.
13/016/2015 18:16:29 - INFO - Loader : S1_Root_dbe9 - Version : loader_MSM8X30_10 / Boot version : S1_Boot_MSM_8227_5 / Bootloader status : ROOTABLE
13/016/2015 18:16:30 - INFO - Processing partition-image.sin
13/016/2015 18:16:30 - INFO - Checking header
13/016/2015 18:16:30 - INFO - Flashing data
13/016/2015 18:16:30 - INFO - Processing of partition-image.sin finished.
13/016/2015 18:16:30 - INFO - No bootdelivery to send
13/016/2015 18:16:30 - INFO - Processing kernel.sin
13/016/2015 18:16:30 - INFO - Checking header
13/016/2015 18:16:30 - INFO - Flashing data
13/016/2015 18:16:30 - ERROR - Processing of kernel.sin finished with errors.
13/016/2015 18:16:30 - INFO - Ending flash session
13/016/2015 18:16:30 - ERROR -
13/016/2015 18:16:30 - ERROR - Error flashing. Aborted
13/016/2015 18:16:30 - INFO - Device connected in flash mode
13/016/2015 18:16:31 - INFO - Device disconnected
nikko3214 said:
Device connected in flash mode
Click to expand...
Click to collapse
So you don't need this fix if Flashtool recognize phone.
What actually happen with phone?
Suddenly rebooted and stuck and animation?
Log probably point to often problem with NAND chip - it just going broken, similar to HDD / SSD.
Bonoboo said:
So you don't need this fix if Flashtool recognize phone.
What actually happen with phone?
Suddenly rebooted and stuck and animation?
Log probably point to often problem with NAND chip - it just going broken, similar to HDD / SSD.
Click to expand...
Click to collapse
this phone suddenly reboots and then it got stucked to sony logo and when i put it on flashmode the green only blinks once then when i am flashing sometimes the loader.sin has error or the kerne.sin
nikko3214 said:
suddenly reboots and then it got stucked to sony logo ... sometimes the loader.sin has error or the kernel.sin
Click to expand...
Click to collapse
Unfortunately, very likely this is classic faulty NAND memory problem.
There's a lot people faced this on XDA and other forums.
Only replacing board, probably by warranty.
Bonoboo said:
Unfortunately, very likely this is classic faulty NAND memory problem.
There's a lot people faced this on XDA and other forums.
Only replacing board, probably by warranty.
Click to expand...
Click to collapse
ok thank you for helping sir
Plz Help
i have xperia m, after unlocking bootloader it stuck on bootlooping, i have not enable usb debugging...any way to fix it?
catmob said:
i have xperia m, after unlocking bootloader it stuck on bootlooping
Click to expand...
Click to collapse
It's normal, just flash stock via Flashtool
Or you can't due broken flashmode?
Bonoboo said:
It's normal, just flash stock via Flashtool
Or you can't due broken flashmode?
Click to expand...
Click to collapse
when i am going to flash...for disabling usb debugging previously, i cant flash my phone...please help me
catmob said:
when i am going to flash i cant flash my phone
Click to expand...
Click to collapse
Please, explain problem in details.
At what step you actually stuck?
Bonoboo said:
Please, explain problem in details.
At what step you actually stuck?
Click to expand...
Click to collapse
sir i have going to unlock my bootloader without enable usb debugging & also i have not installed any custom recovery mode.
now my phone stuck into bootloop...
now what will i do? i can go to fastboot mode and flashmode,
and i have read some instruction about flashing via flashtool...when i am going to flash my phone..it showing error that i have to enable usb debuging to flash the rom
sir plz help me
catmob said:
when i am going to flash my phone..it showing error that i have to enable usb debuging to flash the rom
Click to expand...
Click to collapse
You definitely just need flash stock via Flashtool.
Forget about USB debugging, it's totally unrelated here.
Just carefully follow flashing tutorial
You need flash not in fastboot mode, but in flashmode.
Bonoboo said:
You definitely just need flash stock via Flashtool.
Forget about USB debugging, it's totally unrelated here.
Just carefully follow flashing tutorial
You need flash not in fastboot mode, but in flashmode.
Click to expand...
Click to collapse
ok will my problem solved sir? following these steps?
catmob said:
ok will my problem solved sir? following these steps?
Click to expand...
Click to collapse
Again: yes.
Bonoboo said:
Again: yes.
Click to expand...
Click to collapse
Thnk you so much sir....you saved my life....my prblm has been solved
sir can i flash another rom (not official) like mi,cyaongen mod without root?