Where can i get a htc desire z/g2 motherboard??
i dropped my phone and something inside of it something got loose, now it wont charge or turn on
Just took it to a repair guy, he opened it up and said everything seems fine....no corrosion or anything from water...but the phone wont power on....any one here have any ideas? just shoot em, im willing to take anything
Ask HTC?
MacaronyMax said:
Ask HTC?
Click to expand...
Click to collapse
i tried, they wont cover accidental damage. And my warrantys been voided since someone opened it up..
I bought a second hand phone and it did turn on however there were a numbers of problems with my phone, it had a power button that didnt work, unresponsive parts on the lcd and a quiet in call speaker.
Your best bet before trying to replace the whole pcb is opening your phone using a teardown guide
http://tjworld.net/blog/htc-desire-z-tear-down
Make sure you read it a couple of times and go through the pics so you know what your dealing with, find the power button, make sure its intact and adjust the ribbon cables.
Otherwise just find a cell phone repairer on a classified ad like criagslist or kijiji.
TheToiletSpaula said:
I bought a second hand phone and it did turn on however there were a numbers of problems with my phone, it had a power button that didnt work, unresponsive parts on the lcd and a quiet in call speaker.
Your best bet before trying to replace the whole pcb is opening your phone using a teardown guide
http://tjworld.net/blog/htc-desire-z-tear-down
Make sure you read it a couple of times and go through the pics so you know what your dealing with, find the power button, make sure its intact and adjust the ribbon cables.
Otherwise just find a cell phone repairer on a classified ad like criagslist or kijiji.
Click to expand...
Click to collapse
i had someone take apart the phone and they said everything inside looked good. Im going to take it to another place tommorow and see if they can fix it....otherwise this is the 2nd smartphone that died on me. HTC told me to go to Bell...and i bought this phone 2nd hand. Trying to send my Galaxy S in was a Pain....anyone here know of good 3rd party repair services in Ontario?
jark99 said:
i had someone take apart the phone and they said everything inside looked good. Im going to take it to another place tommorow and see if they can fix it....otherwise this is the 2nd smartphone that died on me. HTC told me to go to Bell...and i bought this phone 2nd hand. Trying to send my Galaxy S in was a Pain....anyone here know of good 3rd party repair services in Ontario?
Click to expand...
Click to collapse
I hate to say it, but it was second hand for a reason. Ever try switching the battery? How about changing the power supply?
melodicjunkie said:
I hate to say it, but it was second hand for a reason. Ever try switching the battery? How about changing the power supply?
Click to expand...
Click to collapse
Yes. Start simple. First check your electron hose to make sure you are getting power to the device. Also check the battery as well as the prongs that connect with the battery tabs. If things are good there, then think about tearing into the phone.
melodicjunkie said:
I hate to say it, but it was second hand for a reason. Ever try switching the battery? How about changing the power supply?
Click to expand...
Click to collapse
no no, dont say that. This phone was fine for 3 months, i dropped it at a club i went to and water got inside the phone....i took it to 3 repair people and they all said the Main PCB motherboard is damanged (water) soo does anyone have any idea where i can find a motherboard?? i have no problem with costs of replacing it. As long as its not more than the phone itself.
jark99 said:
no no, dont say that. This phone was fine for 3 months, i dropped it at a club i went to and water got inside the phone....i took it to 3 repair people and they all said the Main PCB motherboard is damanged (water) soo does anyone have any idea where i can find a motherboard?? i have no problem with costs of replacing it. As long as its not more than the phone itself.
Click to expand...
Click to collapse
You didn't mention water damage in the OP. You said something was loose. Water damage is completly different.
Try ebay.
Hey i found these 3 ads on ebay...do you guys think that a swap of the motherboards would be fine? heres the ads. I contacted the seller and they said the battery was used and thats it but phone seemes operational....i know its a risk, but is it worth it guys?
..need help on this one.
why swap the motherboards if the new phone is working fine. Just transfer data and you're done surely?
elliott2705 said:
why swap the motherboards if the new phone is working fine. Just transfer data and you're done surely?
Click to expand...
Click to collapse
Reason being the other phones have minor problems, like speaker doesnt work, or some of those phones wont pick up signals and i think thats due to a bad radio flash or if i just flash a radio everything should be working fine.
can someone please clarify this? if i buy a phone with a speaker problem and transfer the main PCB board to my old phone...will there still be a speaker problem? or is the speaker a separate unit itself and not related to the pcb board?
jark99 said:
can someone please clarify this? if i buy a phone with a speaker problem and transfer the main PCB board to my old phone...will there still be a speaker problem? or is the speaker a separate unit itself and not related to the pcb board?
Click to expand...
Click to collapse
If am correct the speaker is a separate component
Sent from my HTC Vision using XDA Premium App
lainvalenajr said:
If am correct the speaker is a separate component
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
one of the phones i am bidding for says it might not be able to guarantee a connection to mobile network (send sms,make calls) could that be a radio flash problem? would i be able to fix that??
another is one of the phones boots on and shuts off, i take it that could be a bad flash or something? its only about $20. just trying to weigh my options cause the new phones are lkike bidding for $350 lol im not that rich yet
I found out that my MOTHERBOARD is fine. There was water damage but not enough to go inside to the main board! My dad tested the battery voltage and found i wasnt getting any voltage.
i went to future shop and found a lady to let me use her battery and sure enough the battery was working and phone powered on!!! so i guess my battery was shot from dropping and popping out of phone while recording a video.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330551036273
ordered these from ebay....are they any good? they look decent
Those look like the batteries I got. They were about 1/2 of the claimed mah rating. Worst case, they wiill get you running, and that charger is pretty good.
Sent from my T-Mobile G2 using Tapatalk
That is why you bring a secondary phone to the club. Just sayin'.
BB Bold for the club, G2 for work and school, Iphone 4 for at home / chilling with friends.
convolution said:
BB Bold for the club, G2 for work and school, Iphone 4 for at home / chilling with friends.
Click to expand...
Click to collapse
So, made of money you are? Support your favorite ROM developer you should.
Sent from my HTC Vision using Tapatalk
Hi!
I changed my housing and now i barely have a connection to my wifi. I dont even have a full reception when i hold the phone next to the router. What can i do? Any tricks to make it better?
Thanks for help and excuse my english.
Housing where you live or phone housing?
If it's phone housing then you've done something wrong mate.
Sent from my awesome Arc via subspace beacon.
Lord Takyon said:
Housing where you live or phone housing?
If it's phone housing then you've done something wrong mate.
Sent from my awesome Arc via subspace beacon.
Click to expand...
Click to collapse
Yea the phone housing.
Any idea what to do? I dont know where the wifi antenna is.
I have no idea mate. A friend had a similar issue, he ended up just taking it to a repair centre, but he had actually caused damage.
Sent from my awesome Arc via subspace beacon.
@not
Did you find this thread:
http://forum.xda-developers.com/showthread.php?p=16143004#post16143004
ans specifically post 34, it contains a link to download full (official) disassembly guide and parts list.
I replaced my middle frame awhile ago cuz it was damaged and remember there was a sticky piece on it called something like ANT/GPS flex, might just be for GPS but could easily also be an antenna/amplifier for more wireless signals.
Usually the wifi chip itself is on the motherboard, but i didn't have to disassemble that far for the middle frame.
You could open up your device and see if you have replaced that 'flex thingy' correctly.
Hope it works out for you!
Nirak said:
@not
Did you find this thread:
http://forum.xda-developers.com/showthread.php?p=16143004#post16143004
ans specifically post 34, it contains a link to download full (official) disassembly guide and parts list.
I replaced my middle frame awhile ago cuz it was damaged and remember there was a sticky piece on it called something like ANT/GPS flex, might just be for GPS but could easily also be an antenna/amplifier for more wireless signals.
Usually the wifi chip itself is on the motherboard, but i didn't have to disassemble that far for the middle frame.
You could open up your device and see if you have replaced that 'flex thingy' correctly.
Hope it works out for you!
Click to expand...
Click to collapse
Thank you!
I checked the pdf, and realised I actually never moved the antenna from the original housing. Quite embarrassing =)
Lol! Anywayz glad your problem is solved
Sent from my LT15i using xda premium
Many One X owners, including me, has be having from display/screen issues that are quite annoying. And apparently, none has a definite answer as to what the main cause is. hTC has exchanged all those faulty devices, claiming it's a "hardware" issue...while in fact, it's their stupid back covers...i'll explain as we speak.
First, to know what screen/display problem i'm talking about, please refer to this Video.
Few days ago, i got my hands on a "Dead" One X...but i just refused that fact...because it just works! but no screen....screen is always blank....can touch it, go to dealer and make a phone call even. Sometimes the screen turned, sometimes, and it was like in the video, exactly like it.....so what's the problem?!
yesterday, i'll be honest, i got mad at this phone and held it with a tight grip...my finger happened to press just above something...and the screen turned on! worked great in fact! i was astonished! it just worked....but, oops, i turned off screen, then when wanting to turn it back on...blank...
I kept pushing on the back casing of the phone, trying to find the same place that made the screen turn back on...and viola, same place pressed on, screen back on.
Wanna know what's causing all of this?
Here you go:
Click me!
And those connectors Should be in good contact with this on the back cover
Click me too!
But you know, hTC ****ed this one up, just like it does on most devices with connectors on the back cover...*sigh*...like the sensation for example...
So what to do now?
i tried a bunch of things, and almost broke those connectors with a stupid thick aluminum foil on top of them...
also i tried bending them up, but that doesn't help either, as when the cover pushes them down, their shape will change and well...didn't work.
i also tried putting aluminum foil on the metal connectors on the actual cover...didn't help as well!
it seems only pushing on it from outside does the trick!!
i also tried pushing on the connectors together while the back casing is off, didn't work...as it seems there must be a triple connection...board, connectors, and cover...
I think the only solution would be with a new back casing? but...if hTC f****d it up with this one, wouldn't all back casing suck too?? or is this a manufacturing problem that the connectors are just short and won't connect well?!
here are pictures of how the phone turned on magically after pressing over that connector, and another of how the screen gets messed up when the, well, there's not a good connection...Thank you hTC!
Sample 1 Sample 2
Tomorrow i will buy a new back casing and report if that helped me or not.
I only came to this because i have no warranty...if you have warranty, please consider an exchange!
Oh, and finally, i was able to get into bootloader, first time i saw that screen! always has been blank!...pushing on the connector also did the trick.
Finally!
Soooo...comments?
If anyone has an idea on how to make the back casing come in better contact with those connectors, please let me know.
UPDATE
Hmm, why did you put this into Q&A?
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
EDIT: lol, it's all good now ^^
arabology said:
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
Click to expand...
Click to collapse
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
PAGOT said:
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
Click to expand...
Click to collapse
oh well...also WIFI connectors are bad?...no wonder SIII is flying and hTC is dying...
anyway, maybe a moderator can take this thread to the general forum, thanks for pointing those things out!
and sorry i seemed mean, but many, really, many users have nothing better to do but nag...trolls
thanks ^^
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look normal again.....hmmmm
arabology said:
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look notmal again.....hhhhh
Click to expand...
Click to collapse
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
muamers said:
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Like you guys would say: "inshallah" :d
Just dont rush with the opening and be carefull
Sent from my HTC One X using XDA
waw another fellow citizen
so before we go ahead and go
doooom gloooom htcccc suxxxxxxx
lets first affirm tons of people have no problems with their wifi and their screens
so yes those connectors issues whether screen or wifi are another forum of a manufacturing defect, things might not be perfectly aligned and hence the issue
the flickering issue your thread title suggests finding the source of, isnt related to this, 90% of the corruption we saw out of box on the HOX turned out to be software including the back-light flicker which HTC fixed by readjusting the LCD voltage
moving on to your question a new back cover might very well fix it unless the misalignment is on the board
but im wondering why is this pin related to the screen to begin with? the Sensation didn't have such a pin you could remove the back cover and the screen kept operating, also the disassemble photos that were posted for the HOX showed the board and screen running perfectly without the back cover
as for the stupid copper foil, make sure you don't loose it unless you are planning to make a bomb its added to distribute Tegra3 heat
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
i say you should demand an exchange. hopefully the device they'll give will be of a different tier of products that doesn't have that silly, unknown problem.
also, i'm pretty well sure that they won't repair your device. as i read many users regarding this issue, all of them got an exchange......seems pretty messed up. and i doubt my paper trick will hold long before this issue comes back
PAGOT said:
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
Click to expand...
Click to collapse
now that i have a paper inside my back casing, i can see that my WIFI connection is not at it's best, because of the extra space it took. so i'll most probably solder all the connectors
arabology said:
Update:
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
there was some guy, who posted a youtube video of when he pushed a certain area of his screen (the front part), it would switch off!
It only did it when pushed in that area, it was literally like a second power button.
Sorry I don't know exactly what it was, just the fact that somebody else had a similar problem!
HTC repaired my phone as the screen was faulty, it had a yellow tint, when i sent it for repair it did have screen flickering, ever since its come back, with a new screen, i rooted it and also put in the NEW ARHD rom, 2.05.2 base or something, it has stopped flickering :fingers-crossed:
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
Finally found someone with the exact same problem. I haven't been able to use my hox properly for weeks. Think I need to be sending back to HTC
Sent from my X10i using XDA
Finally I've got my OneX replaced with a new unit.:laugh: Hoping this will not have any sort of hardware faulty anymore.
interestingly. while waiting for my turn in the service center, I was just talking to a guy sitting and waiting beside me who came to report a problem with his OneX
and apparently its his 4th time visit to the service center. And all his previous 3 visits ended up with his OneX getting replaced each time....and each time with a different hardware issue (screen flickering / dead pixels / color faulty). Oh man....I thought the OneX was the best quality product from HTC.
and now I'm having a slight regret that I shud have just waited for another 2 more months and bought the SIII instead. God knows what other problems my OneX is going to come up with.
Hi
arabology said:
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
Probably what's referred to as a dry joint or some other connection not connecting very well, not uncommon in electronics.
You need to get it repaired or replaced, simple as that. If it is a dry joint under one of the chips that use a ball grid array of solder points, you will never be able to sort that out yourself and it would be scrapped more than likely rather than a repair attempted for such a fault. To repair, it would need to go into a special over to heat it enough to melt the solder under the chip. Exerting pressure will just eventually make things worse as you can end up fracturing more of the soldered connections as there is little give to resist flexing.
Regards
Phil
Hi
I'm searching for someone who is able to replace a 220 coil and solder the antenna connector for me. I have a replacement coil (6r8) attached to another logic board. lcd & digitizer both working fine. if any one is able to help in anyway it would really appreciate it.
phone no longer has warranty as its in pieces.
thanks bevan
bevan1971 said:
Hi
I'm searching for someone who is able to replace a 220 coil and solder the antenna connector for me. I have a replacement coil (6r8) attached to another logic board. lcd & digitizer both working fine. if any one is able to help in anyway it would really appreciate it.
phone no longer has warranty as its in pieces.
thanks bevan
Click to expand...
Click to collapse
Someone in Sweden I guess..?
that would be ideal, but finding some1 has not been easy as Swedish is not my native language so explaining this this stuff proves to be a hurdle.
just thought I'd try my luck here.
Hello
I soldered a couple o' things for my old Nokia N73 back in the day. I have no experience with HTC phones but if nobody else pops up, I'll do it.
I live in Finland so it's not a very long distance either.
PM me.
Med vänlig hälsning,
TToivanen
TToivanen said:
Hello
I soldered a couple o' things for my old Nokia N73 back in the day. I have no experience with HTC phones but if nobody else pops up, I'll do it.
I live in Finland so it's not a very long distance either.
PM me.
Med vänlig hälsning,
TToivanen
Click to expand...
Click to collapse
Been a right little demon for helping lately you !
Keep it up TT !
Wilks3y said:
Been a right little demon for helping lately you !
Keep it up TT !
Click to expand...
Click to collapse
Thanks! :laugh: You too