Hello all, My name is Zach. I've been around XDA for a while, but haven't really posted anything, I thanked devs for work and have been flashing my phone for a while now. Well, last night, I was exhausted, and shouldn't have done what I did. I flashed the full "CODE_SPH-D710.GA10_818252_REV00_user_low_ship.tar.md5" to my phone via mobile odin from an ics rom (Phantoms ff18 I believe). Everything was going fine until the phone just shut off, and it booted straight into recovery mode.
Well now my phone will not boot, and I have no access to my external memory card via CWM-based Recovery v5.0.2.3 that was installed from the tar. All of my roms are on my external.
Every time I plug it into the computer I get "USB device is not recognized" and it installs an "Unknown Device" driver from windows. So I can not mount it in CWM to send the files to internal.
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?
I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium
evo3d6 said:
I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I have tried both my laptops, original cord, multiple other cords, have tried wiping in the CWM to nothing new, I do have the correct drivers and have tried multiple versions of them :/
Opening a one click and plugging the phone in just gives me "USB device not recognized"
Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium
Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app
evo3d6 said:
Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Maybe it stuck from phantom's ff18 rom? But yes CWM-based recovery 5.0.2.3
If I could get it to recognize my external SD card then I can flash a rom.
chris-allen said:
Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I hope its fixable :/
Get a Micro SD USB adapter. You can transfer the files with that.
Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.
ZachZombify said:
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?
Click to expand...
Click to collapse
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.
graydiggy said:
Get a Micro SD USB adapter. You can transfer the files with that.
Click to expand...
Click to collapse
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
caaznkid said:
Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.
Click to expand...
Click to collapse
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
Febby said:
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.
Click to expand...
Click to collapse
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.
ZachZombify said:
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.
Click to expand...
Click to collapse
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link
If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium
bigdaddy619 said:
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link
Click to expand...
Click to collapse
I tried this, but even after uninstalling the sammy drivers, some remains in the "update driver" thing. I'm still getting "USB device is unrecognized"
Tr0LL-$_$ said:
If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Read the original post , the phone does NOT boot into android, it stays on the splash screen, forever.
Is it possible to boot an android OS from my external memory card? I know you could do it on the NOOK Color
Any help at this point would be greatly appreciated.
ZachZombify said:
Any help at this point would be greatly appreciated.
Click to expand...
Click to collapse
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?
There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.
MoHoGalore said:
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?
Click to expand...
Click to collapse
Id didn't die, it just turned off, and restarted straight into the recovery. I have tried 3, and 4 different cables, the SD cards reads in the computer but isn't showing up in the recovery, I get "No files found" and since I cant boot, I cant change the directory for the SD card.
PanchoPlanet said:
There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.
Click to expand...
Click to collapse
Yes, But hopefully my phone is revivable!
Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
MoHoGalore said:
Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
I've tried a few different versions, but I've been trying to use a one-click that way it will just install everything
Related
I've tried everything. I've been at it for about 4 hours and i can't figure out why my epic wont mount to my computer anymore. I've reinstalled samsung device drivers, both old and new, i've switched data cables, i've switched USb debugging on/off, i've used different usb ports, i've let it sit overnight without the battery, i've used the dialer code ##8778# to make sure i have it as PDA. None of these work.
I wish i could ODIN back to stock, but without the ability of my pc to recognize my epic, there is not point. ODIN won't recognize it in download mode.
So i'm stuck with ACS bamboozle. not that its a bad rom, but its kinda buggy and i've lost the ability to mount my epic.
any help would be appreciated.
thanks
Why not just flash a new rom through cwm? Then your usb might work on the new one lol..... think cwm before having the smallest thought about odin.......
Have you tried putting you USB on debugging, connecting to computer, try to connect, go into control panel>system>device manager and see what is connecting under USB or Other. It may be Samsung Android....click that and choose update drivers, then pick from Windows Update and leave it alone while it finds all the drivers. Will take a long time. That's how I fixed it on my laptop.
theduce102 said:
Why not just flash a new rom through cwm? Then your usb might work on the new one lol..... think cwm before having the smallest thought about odin.......
Click to expand...
Click to collapse
If i want to flash a modem, I need ODIN.
Can I flash stock EC05 through cwm even after Bamboozle? Im thinking it will work, but it won't return me back to stock.
kennyglass123 said:
Have you tried putting you USB on debugging, connecting to computer, try to connect, go into control panel>system>device manager and see what is connecting under USB or Other. It may be Samsung Android....click that and choose update drivers, then pick from Windows Update and leave it alone while it finds all the drivers. Will take a long time. That's how I fixed it on my laptop.
Click to expand...
Click to collapse
Yup, tried that. It says "Unknown Device" in my device manager. When i try to update it, it says that i have the latest drivers for it already.
The drivers are definitely your issue then. Uninstall the drivers then try the same method. Otherwise download the drivers and reinstall if it won't let you search for updated drivers.
Sent from my SPH-D700 using XDA App
futureprospect said:
If i want to flash a modem, I need ODIN.
Can I flash stock EC05 through cwm even after Bamboozle? Im thinking it will work, but it won't return me back to stock.
Click to expand...
Click to collapse
Usually after I can't connect to the computer after flashing a new rom I can flash a rom that i know worked with my pc and then my computer will recognize the phone again so then I can use odin but that's just me..... I know alot of roms that wouldn't connect through the usb.....
I've downloaded 3 versions of the samsung mobile device drivers. I've uninstalled and reinstalled all of them, individually.
Nothing works.
FLASH A DIFFERENT ROM IN CWM!!!!!!! :/ reason stated in my above post jeez
I did flash a different rom.
I flashed RandomRom's "Egret" and it still didn't recognize it.
I've flashed 5 different roms. All with complete wipes of sd card and factory reset.
I cannot get my phone to mount to my computer, therefor i cannot get to ODIN.
This all happpened after i flashed gingerbread leak. wtf.
futureprospect said:
I've flashed 5 different roms. All with complete wipes of sd card and factory reset.
I cannot get my phone to mount to my computer, therefor i cannot get to ODIN.
This all happpened after i flashed gingerbread leak. wtf.
Click to expand...
Click to collapse
Dude I hear you this leaked has f'd me over completely, the worst part we have nooooooooo answersss....!!!!!
Sent from my SPH-D700 using XDA Premium App
Do what I said earlier and let Windows Update search for drivers.
What about flashing the ReRFS ROM that brings you back to stock? Also, I know its basic, did you reboot your PC after re-installing the drivers?
Sent from my SPH-D700 using XDA Premium App
kennyglass123 said:
Do what I said earlier and let Windows Update search for drivers.
Click to expand...
Click to collapse
Tried that. It just says that windows has determined the best drivers are already installed.
JohnCorleone said:
What about flashing the ReRFS ROM that brings you back to stock? Also, I know its basic, did you reboot your PC after re-installing the drivers?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Yup, tried the ReRFS rom as well and it still says, "USB not recognized."
I even tried it on two other computers, and its the same. There is something def. wrong with my phone.
futureprospect said:
Yup, tried the ReRFS rom as well and it still says, "USB not recognized."
I even tried it on two other computers, and its the same. There is something def. wrong with my phone.
Click to expand...
Click to collapse
Any possible damage to the prongs in the micro USB port? Does it charge properly?
Sent from my SPH-D700 using XDA Premium App
JohnCorleone said:
Any possible damage to the prongs in the micro USB port? Does it charge properly?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I had the worst time on ef02 getting usb to ecognize my phone annoying as heck flash a different rom though, then odin froyo or eg22
Sent from my SPH-D700
JohnCorleone said:
Any possible damage to the prongs in the micro USB port? Does it charge properly?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
There doesn't appear to be any physical damage and it charges just fine.
ac16313 said:
I had the worst time on ef02 getting usb to ecognize my phone annoying as heck flash a different rom though, then odin froyo or eg22
Sent from my SPH-D700
Click to expand...
Click to collapse
I already tried flashing several different roms. None work.
Mass storage still works? If so, uninstall the drivers, put USB debugging on, try to connect to the computer and let it find the drivers all over again. There should be 5 drivers it loads.
mass storage doesn't work either.
Just to say, I have rooted a lot of devices and this is the first time this has ever happen to me!
While in recovery, I hit the wipe system button and now the device says that there is no OS on the device and is stuck on the boot screen. Is there any way to correct this? I am so lost without my GN2!
chinadol4 said:
Just to say, I have rooted a lot of devices and this is the first time this has ever happen to me!
While in recovery, I hit the wipe system button and now the device says that there is no OS on the device and is stuck on the boot screen. Is there any way to correct this? I am so lost without my GN2!
Click to expand...
Click to collapse
Yes its easy download a return to stock ROM for Odin or flash a ROM using twrp ....or restore a back up
Sent from my SPH-L900 using Xparent Blue Tapatalk 2
Epix4G said:
Yes its easy download a return to stock ROM for Odin or flash a ROM using twrp ....or restore a back up
Sent from my SPH-L900 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
I have the jellybomb and tried to flash it but it stated that it failed...Unfortunately for me, I did not back up. So out of pocket of me! Any recommendations on a Rom I can use. I really appreciate the help.:good:
You might want to try this http://www.sxtpdevelopers.com/showt...-TAR-SPH-L900-LJC-(LJC-Modem-Kernel-ROM-Stock)
Thank you! I will try as soon as I get to my computer. Will keep you posted if that is ok!?
Best bet is odin to stock.
Sent from my SGH-T999V using xda premium
chinadol4 said:
Thank you! I will try as soon as I get to my computer. Will keep you posted if that is ok!?
Click to expand...
Click to collapse
Yeah let us know how it goes even if you take a different route to restore
shahkam said:
Best bet is odin to stock.
Sent from my SGH-T999V using xda premium
Click to expand...
Click to collapse
Would you happen to have a link for me. It seems that somehow my memory card I had in the device is currupt or damaged.
My computer is not recognizing my device. It will not recognize on boot screen or in recovery.
Thank you all for the guidance! I am unrooted back to stock but i will not be here long. lol would like to find a nice rom. Jellybomb is cool but to much blue and i can not swap between calls on call-waiting and my pandora wont work. Guess that is something to talk bout in that forum. THANX AGAIN!!!!!
Same phone same problem with a twist
Please help as i have the same problem. In addition, connectin to odin my phone isnt recongnized. Yes drivers are up to date. Im rather green i havent been able to flash a rom yet. Tried flashing diffrent versions of macksrom, but i was successful in flashing perseus kernal.
you could trying start odin then plug up phone while off . and boot in to download mode that way. I find that works sometimes.
rjdhill said:
you could trying start odin then plug up phone while off . and boot in to download mode that way. I find that works sometimes.
Click to expand...
Click to collapse
I belive in the mutilple times of trying to connect odin that was done. Im afraid the phone might not be reconized by the pc.
Will try connecting with your method to be sure first thing in the morning
Fastest way. . If you have access to another phone with memory card or put your card in that phone download rom put card in your phone and flash it from recovery
Sent from my SPH-L900 using xda premium
Results no change
jrags72 said:
Fastest way. . If you have access to another phone with memory card or put your card in that phone download rom put card in your phone and flash it from recovery
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I tried mutiple usb ports odin still not reconizing. There is a rom on extsd. It is Macksrom allstar v5 the latest i belive.
As it fails to install it reads
Finished running boot script.
E:unable to open zip file.
Error flashing zip'/ extsd/
Updating partion details...
In trying to flash previous to this i have never been successful. I have always gottenthis error
Just tried connecting via another computer to odin. Same results, some please guide me.
Just want to get straight to the point;
Brother did a bad flash, Phone doesnt come on at all. But odin still recognizes the phone. Tried flashing stock from xda. gets stuck on setup.
Again, if pc doesnt recognize my brothers phone you would think its dead, but odin does recognize the phone. Also tried using usb jig, nothing, tried recovery, download modes nothing... Any help is much appreciated.
Try different USB ports..or maybe check the download of the file your trying to flash or redownload
Sent from my SAMSUNG-SGH-T989 using xda premium
yea tried all my usb ports, and three different downloads and stock rom off xda. I dunno im just kinda blank at what else i can do.....
thakrew317 said:
Try different USB ports..or maybe check the download of the file your trying to flash or redownload
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
My first step would be to re-download a stock rom and try to flash it multiple times (which i'm sure you already have done). I know when I had a bad flash back to stock and got a completely black screen, it took me quite a few flash attempts to get it to flash correctly.
ok will do.
MoNsTeRmAyHeM said:
My first step would be to re-download a stock rom and try to flash it multiple times (which i'm sure you already have done). I know when I had a bad flash back to stock and got a completely black screen, it took me quite a few flash attempts to get it to flash correctly.
Click to expand...
Click to collapse
Might also try a different usb cable if you have one, I know one of my cables went bad and had issues connecting to my pc.
Yeah I had to use a Samsung OEM cable to get mine to reconize
Sent from my SAMSUNG-SGH-T989 using xda premium
Any progress on your re-flashing?
Thrown at your face by my T989
Yea I had to step aside and repair some iPhones. Just doesn't make sence... Yea I'm pretty close to calling for jtag.
It recognize then freezes on setup connection... On every com...
MoNsTeRmAyHeM said:
Any progress on your re-flashing?
Thrown at your face by my T989
Click to expand...
Click to collapse
I had a similar issue and I managed to recover it by flashing just the stock UVLH1 kernel.
There was also a PIT file packed with Odin which I removed before flashing the Kernel.
I know this is a basic question but did you run Odin as administrator?
Thrown at your face by my T989
Yes^
Sent from my SAMSUNG-SGH-T989 using xda premium
I'm sure they were running Odin as administrator, but I had to ask to cancel that out.
Thrown at your face by my T989
I just bricked my Samsung Galaxy S2x (SGH-T989D). :crying:
I was trying to install the latest CWM recovery and Cyanogen ROMs. It all seemed to go smoothly, but then when I rebooted the phone it stuck on the Cyanogen animation - I left it for more that 15 minutes with no change. At that point I pulled the battery and restarted in recovery mode.
For some reason, the phone would freeze or reboot when I tried to clear the cache directory. The log showed errors that it couldn't access that cache directory either.
To make a long story short, I tried to use ODIN to reinstall the recovery and it crashed half way through. There was a Windows error that ODIN has stopped working and my only option was to close the app.I left the phone for a few minutes but nothing was happening, so I pulled the battery.
Needless to say, now I don't get any activity on the screen. ODIN doesn't see the phone. When I plug the USB cable I get a QHSUSB_DLOAD device under "Other devices".
I do have the Qualicomm QHUSB drivers and a copy of QPST (v 2.7.323 from 2008), but I doubt that will help me much.
What do I do next? Is there any way to fix this? It's a Koodo phone, but I doubt that they'll take it as a warranty repair/swap as it's been unlocked so I can use it on Rogers.
Thanks for ANY help at all! (Even name calling!)
Well if you got $50 bucks check out mobiletechvides
Is.com they will JTAG it for you for around 50 bucks which is ur only option at this point or send it in for a warranty swap out
Sent from my SAMSUNG-SGH-T989 using xda premium
I should have mentioned that I have three of these phones, so there are two I can use to get stock images from, if I can figure out how.
I have connectivity to the phone using QPST... (screen capture attached).
Does anyone know if it's possible to use QPST to capture an image from a good phone?
I've tried to connect to COM8 with PuTTY, but it is unable to open a connection.
Well you're just soft bricked because you didn't wipe system before flashing the new ROM
Easy fix
Odin back to stock ROM (there's a thread in the roll up stickies in dev section)
Odin flash a recovery
Go to goo.im and search under devs gir ericwill and find his openrecovery folder and download twrp 2.4 or just Google search "twrp Hercules 2.5 goo"
Flash it in cwm
Reboot back into recovery
Click wipe
Click advance wipe
Check first 4 options (dalvik, data, system, cache)
Swipe to wipe at the bottom
Now flash your ROM followed by gapps and reboot.
Sent from my Infamous Hercules.
iburnhearts said:
Well you're just soft bricked because you didn't wipe system before flashing the new ROM
Easy fix
Odin back to stock ROM (there's a thread in the roll up stickies in dev section)
Odin flash a recovery
Go to goo.im and search under devs gir ericwill and find his openrecovery folder and download twrp 2.4 or just Google search "twrp Hercules 2.5 goo"
Flash it in cwm
Reboot back into recovery
Click wipe
Click advance wipe
Check first 4 options (dalvik, data, system, cache)
Swipe to wipe at the bottom
Now flash your ROM followed by gapps and reboot.
Sent from my Infamous Hercules.
Click to expand...
Click to collapse
Unfortunately, ODIN doesn't see the phone at all.
The phone shows up in the Windows Device Mangler as a Qualicomm HS-USB QDLoader 9008. (or QHSUSB_DLOAD before I loaded the Qualicomm drivers)
I will take a look at for the posts that you mention though.
Thanks!
Cal_ab said:
Unfortunately, ODIN doesn't see the phone at all.
The phone shows up in the Windows Device Mangler as a Qualicomm HS-USB QDLoader 9008. (or QHSUSB_DLOAD before I loaded the Qualicomm drivers)
I will take a look at for the posts that you mention though.
Thanks!
Click to expand...
Click to collapse
I know Odin doesn't see your phone...but the thread I'm talking about has a link to the drivers that will let odin see your phone
Here's the link http://forum.xda-developers.com/showthread.php?t=1513359
Sent from my Infamous Hercules.
Download Mode
I was reading this and i noticed u never said u anything about put ur phone in download mode have u tryed,
You can do that by pressing the Volume Down and Volume Up keys. Keep the buttons pressed and connect your phone to the computer via USB cable. Wait until Download Mode boots.
Just a thought im sure u already tried but it sounds like u had a little bit of life out of since it booted and froze, i recently bricked mine and could get it to do anything theres a guy on pm me ill send u his name jtag for 25$ and have done and back to u less than 7 days!!!:good:
Try opening kies on your computer and selecting emergency firmware recovery. It worked for me when something similar happened to me.
Sent from my SGH-T989 using xda app-developers app
u gotta verify whether its a soft or hard brick.
u need to put phone in dl mode and try with odin ..flash cwm again ...if u have a backup already..restore it.
make sure to disable kies & any antivirus.
Sent from my SAMSUNG-SGH-T989 using XDA Premium HD app
If possible try another pc.
Sent from my SGH-T989 using xda premium
*sigh*
I cannot get ODIN to flash the stock rom... It stops at "SetupConnection.."
One thing to note, when I try to put the phone into download mode, the screen stays black. Device Mangler says "Qualcomm HS-USB QDLoader 9008 (COM5)". ODIN does see the phone.
Readdownload the zip and let it flash
Sent from my SGH-T989 using Tapatalk 2
esema1o said:
Readdownload the zip and let it flash
Click to expand...
Click to collapse
I'm not sure what you mean.
It sat at Setup Connection for an hour.
I've tried on a couple PC's, and using different cables and USB ports.
Is there anything else I can do to verify that the connection is going to work? Use a terminal on the COM port? ADB?
Thanks for the help guys!
Did you try kies? Open kies on your computer and select "emergency firmware recovery“. It will ask you to enter your serial number (take off the back cover of the phone to see the serial number).
That should get you back to stock. Worked for me when I was having the same problem.
Sent from my Galaxy Nexus using xda app-developers app
gc84245 said:
Did you try kies? Open kies on your computer and select "emergency firmware recovery“. It will ask you to enter your serial number (take off the back cover of the phone to see the serial number).
That should get you back to stock. Worked for me when I was having the same problem.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Unfortunately it says, "the SGH-T989D does not support initialising". Good info though as I didn't try it before.
:crying:
...going for a warranty repair.
At this point I'm going to try for a warranty repair. I haven't had the phone too long and I'm hoping that they don't dig too far when they receive it from me.
Thanks guys!
I'm betting they toss them in a bin if they don't boot! Pretty sure they won't launch an investigation on every phone that gets sent in.
Its the ones that send them in rooted with a custom rom still on them and their volume button quit that get denied warrenty. Lol
Sent from my cell phone telephone....
Use Odin to flash twrp
Justizs26 said:
Use Odin to flash twrp
Click to expand...
Click to collapse
And that will help how???? Lol
Sent from my cell phone telephone....
Cal_ab said:
At this point I'm going to try for a warranty repair. I haven't had the phone too long and I'm hoping that they don't dig too far when they receive it from me.
Thanks guys!
Click to expand...
Click to collapse
I sent like 3 phone brick and 2 root and they never check them out
Sent from my SGH-T989 using Tapatalk 2
I'm currently running task650's current ROM and ktoonz newest kernel . I'm unable to connect my phone to my PC via USB. I've tried 3 different USB cables including the original one that came with the phone. I'm trying to revert to stock to swap out phone, but I can't flash through Odin(cant restore stock recovery) and triangle away won't let me reset flash counter. I'm at a loss for ideas, I've been looking through the forums for days and I can't find anything . I've tried flashing different ROMs/kernels with no luck.
Sent from my SGH-I747 using xda premium
is USB debugging mode on? did you make a nandroid when you first rooted? that would contain the original firmware you were using before flashing anything. are you connecting to your PC after putting the phone in download mode or recovery mode? just covering all the bases, buddy.
Yes I've done all the above, however during a flash of cm10 i soft bricked somehow...and lost all data on my internal.. So I no longer have my original nandroid I'm not new to flashing at all and never imagined that would happen I've learned to expect the unexpected now.
Sent from my SGH-I747 using xda premium
Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock
-Psychosomatic- said:
Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock
Click to expand...
Click to collapse
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium
mtnichols04 said:
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
where are you getting the stock firmware tar from? have you tried a different source location?
xBeerdroiDx said:
where are you getting the stock firmware tar from? have you tried a different source location?
Click to expand...
Click to collapse
I've tried root66_Att_I747uckl3.tar.md5
Only ROM I've tried. I'll try another. I've tried the Samsung toolkit and it doesn't work properly cause I'm not getting proper connection. I have a theory that my USB doesn't work properly because my file directories are messed up on phone and are in a folder emulated/0/...
Sent from my SGH-I747 using xda premium
here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.
xBeerdroiDx said:
here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.
Click to expand...
Click to collapse
thats where I downloaded from before, Everytime I get into Odin it gets stuck on Getting PIT for mapping..........sits there, then fails. phone is in download mode, USB cord that came with phone. ive tried reinstalling USB drivers a million times.
have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.
xBeerdroiDx said:
have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.
Click to expand...
Click to collapse
Tried mobile Odin, it soft bricked my phone, had to plug in to a full charge before I could even get it back into recovery. The first 24 hours it wouldn't even go back into download or recovery... I thought I was going to have to get a new phone. Weirdest thing ever. Downloaded and tried a new stock firmware. I feel like I'm running out of options.. Lol and every time I triangle away I reboot and my triangle is back..lol
Sent from my SGH-I747 using xda premium
Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.
USB Cord matters...
AverageCanadian said:
Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.
Click to expand...
Click to collapse
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.
thegodsquirrel said:
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.
Click to expand...
Click to collapse
Yes, Ive tried every USB plug under the sun. My phone sometimes gets detected by my computer, and I can browse files but if I try to copy something from it, it freezes half way through, then becomes undetechable. Ive tried to flash through odin but it never works....just get stuck then fails.