Develop Bugs

Cant get odin to work for me

Just recently running eg22 gingerbread leak, everything is working perfect but now I want to update my modem currently on (eco5). Everytime I go into download mode it doesn't read in odin for some reason?..does anybody have a ideal or possible solution because I really want to upgrade it!
Sent from my SPH-D700 using XDA Premium App

Try another usb cable. Try re installing drivers

Odin mostly only works in the same usb port you installed the drivers on. Try each port, uninstall/reinstall the drivers and reboot, get a better cable. Also search. There is already about a hundred threads exactly like this.
Sent from my SPH-D700 using XDA App

Been having issues with my laptop, running Win7. This is the laptop I have loaded every ROM since I started tweaking my device.
Lately I have had to uninstall my device from the device manager, go into download mode and plug in the USB, then do a scan for new hardware in device manager. Odin will then recognize the phone and I can run.

Yes I understand that but everyone has different ways on how theirs wa reslove every bit on if helps. Mind works fine when phone on,in download mode it says device malfunction and tryed with 3 different cables(shrug) :/
Sent from my SPH-D700 using XDA Premium App

Make sure you do a proper shut down, I have NEVER had issues with odin til eg22. I practically shat myself trying multiple computers that I know worked but to no avail. All my computers said device malfunctioned. I reinstalled drivers but nothing worked.
The problem was I had pulled the battery while in clockworkmod and went into download mode. I reproduced this later it does not recognize if you pull battery from cwm on eg22.
The solution was as easy as going into cwm doing a backup/wipe and install a fresh srf 1.2 and booting it up then proper shutdown and go into download mode and BAM it recognizes. Hope this works
Sent from my SPH-D700 using XDA Premium App

ajmcedar said:
Been having issues with my laptop, running Win7. This is the laptop I have loaded every ROM since I started tweaking my device.
Lately I have had to uninstall my device from the device manager, go into download mode and plug in the USB, then do a scan for new hardware in device manager. Odin will then recognize the phone and I can run.
Click to expand...
Click to collapse
Thanks man imma give that a shot when i get off!
Sent from my SPH-D700 using XDA Premium App

xopher.hunter said:
Make sure you do a proper shut down, I have NEVER had issues with odin til eg22. I practically shat myself trying multiple computers that I know worked but to no avail. All my computers said device malfunctioned. I reinstalled drivers but nothing worked.
The problem was I had pulled the battery while in clockworkmod and went into download mode. I reproduced this later it does not recognize if you pull battery from cwm on eg22.
The solution was as easy as going into cwm doing a backup/wipe and install a fresh srf 1.2 and booting it up then proper shutdown and go into download mode and BAM it recognizes. Hope this works
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Ay any suggestion I get is closer to a solution, I'm going to have to try what you did first! Thanks hope it works too
Sent from my SPH-D700 using XDA Premium App

Its a no go for both
Sent from my SPH-D700 using XDA Premium App

Same here.
My computer will no longer recognize my phone. Odin doesn't work anymore.

futureprospect said:
Same here.
My computer will no longer recognize my phone. Odin doesn't work anymore.
Click to expand...
Click to collapse
Dang that means were screwed!!
Sent from my SPH-D700 using XDA Premium App

Always is drivers and cables.

I would give the following option (and this is only if your comfortable):
Try installing a VM software, for example virtualbox (http://www.virtualbox.org), install a fresh copy of Windows XP, Vista or 7 (what ever you have a license for) and start fresh from there to:
- Install Epic Drivers (Reboot VM)
- Install phone drivers (connect the usb cable while phone is on and with usb debugging is checked and let it install, then reboot the VM)
- Place the phone in download mode and connect it to the VM, let the drivers install.
Load odin, image files and pit to the VM and proceed to do the download from there, it should work unless something is really wrong with your phone.
Let us know if this helps.

megabiteg said:
I would give the following option (and this is only if your comfortable):
Try installing a VM software, for example virtualbox (http://www.virtualbox.org), install a fresh copy of Windows XP, Vista or 7 (what ever you have a license for) and start fresh from there to:
- Install Epic Drivers (Reboot VM)
- Install phone drivers (connect the usb cable while phone is on and with usb debugging is checked and let it install, then reboot the VM)
- Place the phone in download mode and connect it to the VM, let the drivers install.
Load odin, image files and pit to the VM and proceed to do the download from there, it should work unless something is really wrong with your phone.
Let us know if this helps.
Click to expand...
Click to collapse
Cool another option appreciate it man I willing to try any think at this point lol will report back and spread the news
Sent from my SPH-D700 using XDA Premium App

Do yourself a favor and ditch odin... get heimdall and never look back...

chris41g said:
Do yourself a favor and ditch odin... get heimdall and never look back...
Click to expand...
Click to collapse
Lol i came acrossed that earlier,and with you being one of the mosts respected guys in our forums im going to take you advices and learn more about that program!
Sent from my SPH-D700 using XDA Premium App

Heimdall is much better for recognizing your device and loads it's own drivers. You need to use 7zip to disassemble the tar files into seperate components and place them in their appropriate spots. I heard the newer version can use the full tar. Haven't checked it out yet. The best thing is you can install another recovery and modem when flashing.

[Q] odin problem

I'm trying to flash a new modem with odin v.1.85. I have all the drivers installed, have restarted computer, pulled battery, new usb cord, and odin won't read my phone. It will read it while my phone is turned on, just not in download mode for some reason. I'm not quite sure what i am doing wrong, I've used odin before but it's been awhile. Any guesses as to what is goin on would be appreciated. After multiple searches I haven't found any answers.

Did you try all the usb ports on the computer? Try it with the battery in and see what happens. Its definitely your computer.
Sent from my SPH-D700 using XDA App

Thanks. tried all but one usb port. i'll give it another go. tried it with battery in and out
*edit* tried all. nothin works. i do have a gadget serial error under the device manager it looks like. any ideas?

can i use mobile odin for this and skip the computer part all together?

Mobile odin doesn't work on our phone yet... so no... give me a second.. what drivers did you install? I'm going to link you the ones I always use... they've always worked. Also if you have any other phone drivers unistall them and install the ones I link. Once you've unistall the others restart the pc and install the new ones.
http://forum.xda-developers.com/showthread.php?t=961956
Sent from my SPH-D700 using xda premium

thanks i'll give it a shot

worked like a champ. thanks!

jr_mfn_p said:
worked like a champ. thanks!
Click to expand...
Click to collapse
Great! no problem.
Sent from my SPH-D700 using xda premium

Can't connect AT&T sgs3 to computer

Can someone help me connect my phone to my computer.cause somehow it's not connecting all the drivers are being installed except for mtp keeps saying that's the failed one.Is there a procedure I have to do or option I got set..like usb debugging, Connect first or later, have mtp checked out camera check with plugged in, etc? I downloaded the drivers from Samsung. Thanks. I don't like using kies cause my network is too slow btw. I prefer the way faster way through usb. Running win7 64bit. Thanks again.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Anyone? =(
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I have the same issue, I still seem to be able to use adb at least.
No idea why or how to fix? Think I posted a thread as well.

Did you install Kies? That includes the USB drivers. And you can also use Kies via usb.
Sent from my SGH-I747 using xda premium

d3athsd00r said:
Did you install Kies? That includes the USB drivers. And you can also use Kies via usb.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
how do i install kies? where? please give me site..i cant find it on attwireless its being gay..as always.

I was having an issue when I first got mine as well where 1 of the drivers was failing. For me it turned out to be Kies, uninstalled it and I can connect to the computer, install it again and the driver fails and can't connect anymore, rinse and repeat.. did the install and uninstall about 6 times.. everytime it was uninstalled the phone would connect, when installed it would fail again. So no Kies for me, not that its a huge problem, XDA has better roms and I don't need it to sync anything lol
Hope that helps someone, though for your it doesn't sound like you have have Kies installed right now.. so no clue if this will help you or not.

You get Kies from Samsung.
Sent from my SGH-I747 using xda premium

bluerogue85 said:
Can someone help me connect my phone to my computer.cause somehow it's not connecting all the drivers are being installed except for mtp keeps saying that's the failed one.Is there a procedure I have to do or option I got set..like usb debugging, Connect first or later, have mtp checked out camera check with plugged in, etc? I downloaded the drivers from Samsung. Thanks. I don't like using kies cause my network is too slow btw. I prefer the way faster way through usb. Running win7 64bit. Thanks again.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
What software are you running at the moment? Are you running a custom ROM with a custom kernel? I was running stock with a custom kernel and i think if i remember correctly there was a usb bug in the kernel and that prevented me from connecting to the computer.But that was awhile ago. I had all the drivers to the computer with it not connecting.
Sent from my SGSIII with the XDA Premium App

Bruce Lee said:
What software are you running at the moment? Are you running a custom ROM with a custom kernel? I was running stock with a custom kernel and i think if i remember correctly there was a usb bug in the kernel and that prevented me from connecting to the computer.But that was awhile ago. I had all the drivers to the computer with it not connecting.
Sent from my SGSIII with the XDA Premium App
Click to expand...
Click to collapse
i didnt have kies and now i do..the latest ver. and it worked the first time and now it didnt! geese..im running stock but i think its a custom kernel stock..cause mine is rooted..wifi too slow i really just wanna plug this in and play mtp usb device keeps failing i need that driver

Might seem like common sense but did you reboot the computer after installing the drivers?.
Also turn debugging off and plug it in go to "my computer" and see if you can access the device.
If that fails try ) Dial *#7284# and select "Qualcomm USB Settings" then check "MTP + ADB"

bluerogue85 said:
i didnt have kies and now i do..the latest ver. and it worked the first time and now it didnt! geese..im running stock but i think its a custom kernel stock..cause mine is rooted..wifi too slow i really just wanna plug this in and play mtp usb device keeps failing i need that driver
Click to expand...
Click to collapse
If you are rooted with no custom rom and nothing flashed in CWM other than super user, you do not have a custom kernel. Make sure that Keis itself is not running, just so the USB drivers are there and nothing else.

Have you tried flashing a stock kernel or a new ROM yet? That could be an option to fix the problem.
Sent from my SGSIII with the XDA Premium App

thanks for all the help you guys..i got it..just took a few times i guess..didnt even have to restart my computer. but my usb debugging is turned off..i just made sure i uninstalled my samsung drivers and use the kies one..there was even an upgrade to lg1 i believe it is..when will jelly bean come out you think for this..att..guess..besides using a custom rom..still running stock rom btw..which rom btw is the most closest to stock jelly bean 4.1

[Q] Need help ASAP! :c

Hello all, My name is Zach. I've been around XDA for a while, but haven't really posted anything, I thanked devs for work and have been flashing my phone for a while now. Well, last night, I was exhausted, and shouldn't have done what I did. I flashed the full "CODE_SPH-D710.GA10_818252_REV00_user_low_ship.tar.md5" to my phone via mobile odin from an ics rom (Phantoms ff18 I believe). Everything was going fine until the phone just shut off, and it booted straight into recovery mode.
Well now my phone will not boot, and I have no access to my external memory card via CWM-based Recovery v5.0.2.3 that was installed from the tar. All of my roms are on my external.
Every time I plug it into the computer I get "USB device is not recognized" and it installs an "Unknown Device" driver from windows. So I can not mount it in CWM to send the files to internal.
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?

I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium

evo3d6 said:
I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I have tried both my laptops, original cord, multiple other cords, have tried wiping in the CWM to nothing new, I do have the correct drivers and have tried multiple versions of them :/
Opening a one click and plugging the phone in just gives me "USB device not recognized"

Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium

Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app

evo3d6 said:
Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Maybe it stuck from phantom's ff18 rom? But yes CWM-based recovery 5.0.2.3
If I could get it to recognize my external SD card then I can flash a rom.
chris-allen said:
Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I hope its fixable :/

Get a Micro SD USB adapter. You can transfer the files with that.

Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.

ZachZombify said:
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?
Click to expand...
Click to collapse
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.

graydiggy said:
Get a Micro SD USB adapter. You can transfer the files with that.
Click to expand...
Click to collapse
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
caaznkid said:
Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.
Click to expand...
Click to collapse
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
Febby said:
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.
Click to expand...
Click to collapse
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.

ZachZombify said:
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.
Click to expand...
Click to collapse
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link

If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium

bigdaddy619 said:
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link
Click to expand...
Click to collapse
I tried this, but even after uninstalling the sammy drivers, some remains in the "update driver" thing. I'm still getting "USB device is unrecognized"
Tr0LL-$_$ said:
If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Read the original post , the phone does NOT boot into android, it stays on the splash screen, forever.

Is it possible to boot an android OS from my external memory card? I know you could do it on the NOOK Color

Any help at this point would be greatly appreciated.

ZachZombify said:
Any help at this point would be greatly appreciated.
Click to expand...
Click to collapse
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?

There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.

MoHoGalore said:
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?
Click to expand...
Click to collapse
Id didn't die, it just turned off, and restarted straight into the recovery. I have tried 3, and 4 different cables, the SD cards reads in the computer but isn't showing up in the recovery, I get "No files found" and since I cant boot, I cant change the directory for the SD card.
PanchoPlanet said:
There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.
Click to expand...
Click to collapse
Yes, But hopefully my phone is revivable!

Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2

MoHoGalore said:
Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
I've tried a few different versions, but I've been trying to use a one-click that way it will just install everything

USB only works to charge/triangle away doesn't work/ can't revert to stock.

I'm currently running task650's current ROM and ktoonz newest kernel . I'm unable to connect my phone to my PC via USB. I've tried 3 different USB cables including the original one that came with the phone. I'm trying to revert to stock to swap out phone, but I can't flash through Odin(cant restore stock recovery) and triangle away won't let me reset flash counter. I'm at a loss for ideas, I've been looking through the forums for days and I can't find anything . I've tried flashing different ROMs/kernels with no luck.
Sent from my SGH-I747 using xda premium

is USB debugging mode on? did you make a nandroid when you first rooted? that would contain the original firmware you were using before flashing anything. are you connecting to your PC after putting the phone in download mode or recovery mode? just covering all the bases, buddy.

Yes I've done all the above, however during a flash of cm10 i soft bricked somehow...and lost all data on my internal.. So I no longer have my original nandroid I'm not new to flashing at all and never imagined that would happen I've learned to expect the unexpected now.
Sent from my SGH-I747 using xda premium

Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock

-Psychosomatic- said:
Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock
Click to expand...
Click to collapse
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium

mtnichols04 said:
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
where are you getting the stock firmware tar from? have you tried a different source location?

xBeerdroiDx said:
where are you getting the stock firmware tar from? have you tried a different source location?
Click to expand...
Click to collapse
I've tried root66_Att_I747uckl3.tar.md5
Only ROM I've tried. I'll try another. I've tried the Samsung toolkit and it doesn't work properly cause I'm not getting proper connection. I have a theory that my USB doesn't work properly because my file directories are messed up on phone and are in a folder emulated/0/...
Sent from my SGH-I747 using xda premium

here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.

xBeerdroiDx said:
here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.
Click to expand...
Click to collapse
thats where I downloaded from before, Everytime I get into Odin it gets stuck on Getting PIT for mapping..........sits there, then fails. phone is in download mode, USB cord that came with phone. ive tried reinstalling USB drivers a million times.

have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.

xBeerdroiDx said:
have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.
Click to expand...
Click to collapse
Tried mobile Odin, it soft bricked my phone, had to plug in to a full charge before I could even get it back into recovery. The first 24 hours it wouldn't even go back into download or recovery... I thought I was going to have to get a new phone. Weirdest thing ever. Downloaded and tried a new stock firmware. I feel like I'm running out of options.. Lol and every time I triangle away I reboot and my triangle is back..lol
Sent from my SGH-I747 using xda premium

Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.

USB Cord matters...
AverageCanadian said:
Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.
Click to expand...
Click to collapse
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.

thegodsquirrel said:
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.
Click to expand...
Click to collapse
Yes, Ive tried every USB plug under the sun. My phone sometimes gets detected by my computer, and I can browse files but if I try to copy something from it, it freezes half way through, then becomes undetechable. Ive tried to flash through odin but it never works....just get stuck then fails.