[Q] Can you add google account without WIFI? - T-Mobile Samsung Galaxy S II SGH-T989

I updated my phone to Jedi Jelly.. However after the install, i cannot add my google account as it forces me to use wifi, and no wifi service availble
My plan through telus has lots of data, is there a way to add google account without being forced to use wifi only?

Could be but not that I know of unless you can do it using gmail account somewhere on the web
Sent from my SGH-T989 using Tapatalk

richardlibeau said:
Could be but not that I know of unless you can do it using gmail account somewhere on the web
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I need to sync my phone with my google account, so I don't know how the web would help with that.
I am trying to go to setting > add account > google.. then it asks me new or existing, I select existing then it goes to wifi page and says scanning... the next arrow is grey out, as there is no active wifi for me to select

You should not need WiFi to add an account. Can you use the web browser with WiFi off?

Do you have a normal data connection? I'm not familiar with the specific ROM you're using, but It's usually designated by a letter appearing near your signal meter on the top right side. If you're not getting any data connection at all, you may want to try updating/changing your radio.
Radio for the T989 are available:
http://forum.xda-developers.com/showthread.php?t=1895400

You need to flash a tel us radio and get a APN for mobile
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

sirx7 said:
I need to sync my phone with my google account, so I don't know how the web would help with that.
I am trying to go to setting > add account > google.. then it asks me new or existing, I select existing then it goes to wifi page and says scanning... the next arrow is grey out, as there is no active wifi for me to select
Click to expand...
Click to collapse
Basically i am saying try data or web to access gmail. Not 100% sure since I have never had the problem. I always have wifi
Sent from my SGH-T989 using Tapatalk

GaidinBDJ said:
Do you have a normal data connection? I'm not familiar with the specific ROM you're using, but It's usually designated by a letter appearing near your signal meter on the top right side. If you're not getting any data connection at all, you may want to try updating/changing your radio.
Radio for the T989 are available:
http://forum.xda-developers.com/showthread.php?t=1895400
Click to expand...
Click to collapse
That was it the radio was wrong so i was not getting data service, Thank you. :good:

do one need a wifi connection to sign in for google accounts
I can't sign in to google accounts without wifi .....whenever i try to do so my phone ask's me me to choose from existing user or new user, and no matter what i choose ,it asks me to choose wifi network. please help

gionee p2 said:
I can't sign in to google accounts without wifi .....whenever i try to do so my phone ask's me me to choose from existing user or new user, and no matter what i choose ,it asks me to choose wifi network. please help
Click to expand...
Click to collapse
Did you check the radio to match your service provider (see above posts)

Yes you can
Before you go ahead to try to add the gmail account to your android, please confirm and make sure your Data connection is on. Most of my clients with the problem had not realized that the data connection of their phones was off. Hope it helps

Also, make sure you have the APN correctly configured, or that you have an APN active to begin with. You can check this in the Settings>Mobile Network>Acces Point Names
If there is nothing checked there, you need to configure APN's, a quick google can help you with your network APN

it should be normal to use either wifi or local connection using (sim card) to log in or downloading in PlayStore. Just make sure your access points are correct so that when connecting there will be no problem.

Related

quick GPS question

Does anyone know why when quick gps expires, it doesnt automatically update? I am on a custom ROM (mightyrom 2/1) on a CDMA Tp2 (SPRINT). the quick GPS data expires and says EXPIRED but is never automatically updated until I manually do an update. I have it set to automatically update. is there a service or something that needs to be running??
Expired means the 7 days are up that the satellite positioning was good for. It should download new positions which will then say 7 days...
Seems to work fine when I use wireless or when I update synced to my PC...
Thanks.. I know what expired means on QUICK GPS. the issue is that it NEVER UPDATES the data. I have it set to DOWNLOAD AUTOMATICALLY and ALSO to DDOWNLOAD when connected to a PC. NADA.. is there a service that needs to be running or something??
anyone with a solution??
You only need an active internet connection for the update to run. There are no services required to be running for the update. Try opening an internet connection, either 3G or wifi and then manually run the update to make sure the quickgps program itself is not corrupted. If it does update manually, likely you need to change the internet settings to allow programs to open a 3G session.
ms0529 said:
You only need an active internet connection for the update to run. There are no services required to be running for the update. Try opening an internet connection, either 3G or wifi and then manually run the update to make sure the quickgps program itself is not corrupted. If it does update manually, likely you need to change the internet settings to allow programs to open a 3G session.
Click to expand...
Click to collapse
Thanks for the info.. It does run manually and everythng else runs on its own wihtout me doing anything such as EMAIL, weather, facebook tab updates, etc etc etc... I think its only the quick GPS not running when the data expires.
I also have the check in the down when connected to USB and it doesnt do that either wen I am connected to my computer...
Mine is always up to date. I look every few weeks, and quite unlike my original Tilt, it's always up to date.
check your connections page under network management and make sure of the selection under "programs that automatically connect to the internet should connect using". I am not sure on sprint, but at&t uses "medianet" for such connections. Try one or more of these settings to see if it makes a difference. Your mail programs are always open, running in the background, and quickgps starts up, runs and shutsdown, so it must enact a web connection, where your mail does not. Likely, since the program works manually, the settings here are not correct
ms0529 said:
check your connections page under network management and make sure of the selection under "programs that automatically connect to the internet should connect using". I am not sure on sprint, but at&t uses "medianet" for such connections. Try one or more of these settings to see if it makes a difference. Your mail programs are always open, running in the background, and quickgps starts up, runs and shutsdown, so it must enact a web connection, where your mail does not. Likely, since the program works manually, the settings here are not correct
Click to expand...
Click to collapse
I just checked and under programs that automatically connect it was set to "MY WORK NETWORK" .. then there is program that connect to a private network .. its also set to MY WORK NETWORK. I changed the top on to the choice called SPRINT .. I bet that solves it... Should I worry about the other setting for private networks?
EDIT: I changed it to SPRINT but it keeps resetting to "MY WORK NETWORK" .. how do I fix this? is there a registry setting for this?
EDIT: I put sprint for BOTH SETTINGS and it appears to save... do I need to worry about the PRIVATE NETWORK SETTING since I dont have any VPN set up on the phone.. the MY WORK NETWORK does not have any settings in it...
No, don't worry about it. It is just another option to set up alternate connections, if you need them. Leave it at Sprint for your internet connections and you should be fine. Write more if you need help,
Im on a new ROM and once again QUICKGPS is not automatically downloading when expired.. I followed the fix on here that works on the other rom I was running.. any ideas? Im on mighty 6/20
anyone??? no ideas??
Guys, I just purchased Sprint Touch Pro 2 and using it in Europe (GSM).
Though when I try to run the GPS application, it forces me to download the latest satellite data but even if my phone is connected to the internet via USB, it doesn't download anything.
Any idea why it isn't working? And also, why does the software needs to download stuff from internet, a GPS device should be finding the satellites himself, without any "aid" from external sources.

No Auto data connection

Hi there,
Maybe I haven't searched in the right area's, but I certainly have had a look around and couldn't find anything to match my exact issue.
I've just purchased an HTC Desire from Telstra in Australia, but I'm based in New Zealand and so didn't want or need all of the built in Telstra stuff so I rooted the device and installed the HTC official Froyo build for the device.
All worked perfectly and the upgrade was successful and all I needed to do was to add 2 APN's, one for mobile data and one for MMS.
Now they connect up perfectly when I manually connect them, but if I open up Internet for example, I'd have expected it to automatically connect up to 3G data if no wireless is available but it doesn't it just says no connection.
The mobile data APN is set as the default and has a green selection next to it when I look at them.
Am I missing something ?? I'm an Android newbie so please excuse this if it's something obvious and I'm being dumb !
Geeeez I'd have expected someone to have been able to answer what I'm sure is such a simple feature / expectation.
All my previous windows mobile devices just hooked up with WIFI if available and 3G if not, I didn't have to manually connect. As soon as a program needed access to 3G it just hooked up and did what it needed.
One thing I was hoping for in Android was that it would hook up as the windows mobile did, but would switch itself off if it wasn't used for a while......... something Windows Mobile didn't do so it would go flat pretty quick if you had it checking the web on a regular basis as it would just leave the 3G connection running even though there was no data flowing.
Come on people.......... do other peoples Android devices hook up automatically when required ??? or am I just expecting too much ?
canman said:
Come on people.......... do other peoples Android devices hook up automatically when required ??? or am I just expecting too much ?
Click to expand...
Click to collapse
Yes it does. Other than turning mobile internet off and on, I'm not even certain how you would "manually connect"?
Regards,
Dave
canman your Desire ought to automatically grab the APN settings with a SIM card installed, when you power it up. Failing that, once you manually enter correct settings it should automatically use those. There is no "manual connection" I know of, just enter the APN settings, or verify they are correct, and you never have to do this again. Double-check that the settings are correct. Also, if you are using wifi turn that off until you are sure that your mobile data is working ok. If you have done everything correctly and you are getting error messages, the phone is defective and should be returned.

Slide Isssue. $$$ Reward.

This goes under development because its a problem with my phone regarding the development so before the cyanogen rom release i had eugene's froyo5 and it worked fine.. well my fiance picked up the phone ****ed around with it and now no matter what 2.2 rom i use i can't get INTERNET sites to load or.. MARKET to sync my account or communicate this is with cyanogen rom and eugene's froyo6.. now my wifi will see connections connect and even gather info/ip addy from the wifi however it will not let me load pages ect.. now in 2.1 running the old RADIO + Slidemeroot5 or whatever it's called the stock with root it will go into the wifi/find/communincate and load my MARKET/INTERNET just fine.. so it has to be with a setting that would stay threw data/cache wipe with Cyanogen Kanged heres the thing.. I've wiped many times I've even tried restoring old backups from froyo5 they no longer let me sync/internet/market so.. anyone who can find a solution will receive an IMMEDIATE $20.00 donate and if done in a timely fashion an addition $10.00...
I will not be able to RE-ROOT or UN-ROOT my phone as i do not have my USB cable anymore
check your APN settings dude
Virus, what is with you and trouble?! You two always seem to find each other...
Tuba is right it sounds like your apn settings are wrong or deleted.
tubaking182 said:
check your APN settings dude
Click to expand...
Click to collapse
what do you mean?
sino8r said:
Virius, what is with you and trouble?! You two always seem to find each other...
Click to expand...
Click to collapse
No... Bad-Luck and me seem to be on everyday terms
Your not on t-mobile, so you need to change your APN settings to att
settings>wireless settings>mobile networks>apn settings, then you should be able to add the correct APNs or see what is listed there
tubaking182 said:
settings>wireless settings>mobile networks>apn settings, then you should be able to add the correct APNs or see what is listed there
Click to expand...
Click to collapse
no APN listed
Virus1x said:
what do you mean?
No... Bad-Luck and me seem to be on everyday terms
Click to expand...
Click to collapse
Lol! Yeah, it sounds about right. I have'd had that streak before.
menu, settings, wireless networks, mobile networks, access point name
Google tmobile apn android and they'll list the proper apn settings. I don't have time to type them all out right now.
oppsy, I see some folks beat me to it and you need the at&t settings anyways. Just google at&t android apn settings. That should do it.
you will need proper APN setting for your carrier, google that shiz and you should be good to go, then you will just need to add the APN to your phone from that same screen
apns are different for each carrier, google APN <carrier> mytouch slide(or just android)
sino8r said:
Lol! Yeah, it sounds about right. I have'd had that streak before.
menu, settings, wireless networks, mobile networks, access point name
Google tmobile apn android and they'll list the proper apn settings. I don't have time to type them all out right now.
Click to expand...
Click to collapse
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T
Virus1x said:
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T
Click to expand...
Click to collapse
Huh? No data plan huh. Yeah, that will matter. Umm, so you have been using wifi to access internet right?
Okay from what I understand... wifi is real iffy with the 2.2 ports. You might have to select static and type in your ip settings from your pc. Just go on the pc and run command prompt and type ipconfig. That will tell your ip setting and enter them into the correct slots on your phone. Its under menu settings wireless& networks wifi settings menu advanced select static ip
well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?
tubaking182 said:
well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?
Click to expand...
Click to collapse
Yeah, he's basically saying wifi isnt sending data to the phone. I edited my previous post to show him how to set up a static network.
tubaking182 said:
well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?
Click to expand...
Click to collapse
yes I had wifi working fine on newslide.zip or myupdate.zip from eugene and all builds before in last 2 days wifis has stopped working... unknown why
Reread the first post. It says my WIFI will connect info and all that and above he states he doesn't have a data plan so its going to have to be wifi hes on.
Now I am having the same problem ever since I flashed the ROM and wiped twice and reflashed twice. Trying static IP now.
alas no luck on STATIC, question is why would I need to set up static when it should auto connect and auto know ya know? i'd like to be able to use WIFI outside of my home aswell
So right now it doesn't work on any rom now? If it's the cyan kernel, try dumfuq's oc kernel, I know it sounds strange but i tried one of cyan's kernel and somethings stopped working, led flashlight is one...Tried the new dumfuq and it worked for me. No promises though that it will work for your wifi problem.
your ip address of your router is 192.168.0.1 which means that your IP address of your phone will have to be 192.168.0.x since the computer is 192.168.0.199 i would try something around the 199 range(try going plus or minus 10) so either 192.168.0.189 or 192.168.0.209
also you will have to set subnet mask to 255.255.255.0 and gateway to 192.168.0.1
Ace42 said:
So right now it doesn't work on any rom now? If it's the cyan kernel, try dumfuq's oc kernel, I know it sounds strange but i tried one of cyan's kernel and somethings stopped working, led flashlight is one...Tried the new dumfuq and it worked for me. No promises though that it will work for your wifi problem.
Click to expand...
Click to collapse
will attempt wipe..
flash cyanogen rom
flash kernel
flash new radio
flash GAPPS
and tell ya
allows for surfing via browser doesn't fix my Market/google issue
ERROR from Market..
You don't have a network connection.
This could be a temporary problem or your phone may not be provisioned for data services. please try again when connected to a mobile network or connect to a wifi network, if the problem continues call customer service..
then gives me option to connect to wifi but i am connected
Virus1x said:
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T
Click to expand...
Click to collapse
If it worked before on myfroyo 5, then push the apn.conf into /system/etc
or
You can try pushing the apn.conf file from the aria into /system/etc
then do a factory reset..
may or may not work
~Eugene

[Q] Concerns about data roaming

I hope I'm posting this in the proper category.
Namely, I'll be leaving my home country very soon and travel abroad and I will most certainly need to occasionally do SSH connection to my server over 3G, which leads me to data roaming. Now, data roaming at my carrier is super expensive, so I was wondering if there is a way to completely disable data while in roaming, but still be able to connect to 3G and EDGE when I explicitly tell the phone to do so (eg. for SSHing somewhere or checking in on Foursquare, refreshing Twitter timeline, etc).
I saw that there's an option to uncheck Data Roaming in Wireless & Network settings, but I would say that will completely turn off all data connections and NOT allow me to manually and explicitly initiate data connections. Is that true? Is there a way to make it connect to 3G only when I explicitly tell it to while remaining disconnected otherwise?
Allow all phone data settings on. Download APNdroid or similar (APN on off widget) from the market. Open app and set any preferences, then add widget to home screen. Activate by tapping on off on (or something like that). Green on, red off.
All it does is rename the APN settings so it "fails" to connect.
Sent from my GT-I9100 using XDA Premium App
petarpetrovic said:
I hope I'm posting this in the proper category.
I saw that there's an option to uncheck Data Roaming in Wireless & Network settings, but I would say that will completely turn off all data connections and NOT allow me to manually and explicitly initiate data connections. Is that true? Is there a way to make it connect to 3G only when I explicitly tell it to while remaining disconnected otherwise?
Click to expand...
Click to collapse
Your quite correct in that it will stop data connections, but why not turn it back on when you want to connect?, the other possibly cheaper option would be to, as long as your phone is not networked locked, buy a local PAYG sim with data and use that in your phone when you want to use 3G
Buying local sim would be wise option....
Sent from my Desire HD
A local prepaid SIM is a good idea, far cheaper than using data roaming.
Additionally, to avoid background data usage, you might want to install Droidwall and allow only the SSH app to connect to the internet.
ghostofcain said:
Your quite correct in that it will stop data connections, but why not turn it back on when you want to connect?
Click to expand...
Click to collapse
Because I want only that one application to use the data connection when I want it to, without all other apps opening their own connections for sync and other stuff, since I have a lot of apps and accounts that sync in certain periods of time (this is an Android device, after all ).
frosty_ice said:
Additionally, to avoid background data usage, you might want to install Droidwall and allow only the SSH app to connect to the internet.
Click to expand...
Click to collapse
Exactly what I needed! Many thanks for the suggestion, I'll try it out!

Problem with data

I just got the SGSII today & I love it and all but when I try to go on the Internet or use an app that requires a data connection, the connection never goes through (I have unlimited data plan), whereas when I use my Wi-Fi, I have no problems. What should I do?
You may need to enter your carriers apn settings manually. Should be under your data settings called Access Point Names, hit menu and hit add new. You should be able to get the settings from the carriers website that you need to input.
Also make sure data is enabled (you never know )
Sent from my SAMSUNG-SGH-T989 using xda premium

Categories

Resources