Maybe someone can get help me here, I flashed The Peoples ROM that uses AROMA installer and chose all the settings I wanted. I was extremely happy with the choices. However one of the options for the volume was called "Blow your speaker loud" which I should have taken more literal. My question is can I launch AROMA installer again and not change anything but my volume choice to the option that was just below "blow my speaker" or by doing so am I going to re-install the ROM and possibly undue many settings I have already set up. I'm extremely familiar with flashing ROMs just new to AROMA.
Any help would be greatly appreciated! Thanks in advance!
Dorian M Delgado
dmdelgado said:
Maybe someone can get help me here, I flashed The Peoples ROM that uses AROMA installer and chose all the settings I wanted. I was extremely happy with the choices. However one of the options for the volume was called "Blow your speaker loud" which I should have taken more literal. My question is can I launch AROMA installer again and not change anything but my volume choice to the option that was just below "blow my speaker" or by doing so am I going to re-install the ROM and possibly undue many settings I have already set up. I'm extremely familiar with flashing ROMs just new to AROMA.
Any help would be greatly appreciated! Thanks in advance
Dorian M Delgado
Click to expand...
Click to collapse
Yes go to the TPR thread and search, they posted flashables for different sound mod levels you could just flash before having to go through the whole install. Search and you shall find your answers, your not the first to ask.
Transmitted with a portable device using Xparent Blue Tapatalk 2
I truly do appreciate the response as well as the intention. However I did search through the thread and did not find these flashable volume mods. Only time I saw them was during the AROMA Installer itself. It is possible that I may have missed them upon searching throughout the vast pages of the thread. But the effort was made on my part (I guess not good enough). I just double checked and still did not find the link. If you could point me in the right direction it would be much appreciated. As for others asking about the same issue, I am a full time pre-med student a FIU and dont get a chance to check the Q&A thread as much as I would like to....
Thanks again,
DMD
dmdelgado said:
I truly do appreciate the response as well as the intention. However I did search through the thread and did not find these flashable volume mods. Only time I saw them was during the AROMA Installer itself. It is possible that I may have missed them upon searching throughout the vast pages of the thread. But the effort was made on my part (I guess not good enough). I just double checked and still did not find the link. If you could point me in the right direction it would be much appreciated. As for others asking about the same issue, I am a full time pre-med student a FIU and dont get a chance to check the Q&A thread as much as I would like to....
Thanks again,
DMD
Click to expand...
Click to collapse
They are all over the thread post going back maybe 30 days or less. Look for posts from Rompnit or Naddict.
Here's one
http://forum.xda-developers.com/showthread.php?p=36843853
Transmitted with a portable device using Xparent Blue Tapatalk 2
Related
I just flashed 5.0.2 and I can no longer boot to recovery. I'm running:
ILWT CM7 b2 right now.
I can't reboot to recovery from the shutdown menu, or from ROM Manager. It worked once, and now it just sits there at the HTC screen. Any ideas? I tried to reflash it too from ROM Manager - same deal.
Open rom manager go to the bottom of the page, you can see an option that allows you to install a previus version of cwm.. it is called "clock work mod recovery (all)". try the previus version (3.0.2.4) install it... It should work...
sent from my HTC vision with synergy Rom using xda app
I flashed back to 5.0.1 - same issue. Could it be related to the ROM I have installed?
No. If you bothered reading any of the numerous threads speaking of this exact same issue..or looked in the clockworkmod thread you would see that recovery 5.X have issues. That's why the initial response told you to flash 3.0.2.4 not 5.
Sent from my HTC Vision using XDA Premium App
Oh cool, thanks for having the stereotypical dickish tone. I appreciate that.
I searched... I didn't come up with anything when I searched. I'm not some typical "newbie tl;dr" person. I looked for what I could find, and posted when I couldn't find it.
But hey, thanks for being a **** - and not even posting the thread where I should be looking. Thumbs up, really appreciate that help there.
Admin: Go ahead and close this thread, I found out that I should be clicking on a blank thread to fix my issue. Fantastic. So helpful!
EDiT: And for the record, the 5.0.1 version WORKED for me for a long time... and it stopped.
MERKJONES said:
Oh cool, thanks for having the stereotypical dickish tone. I appreciate that.
I searched... I didn't come up with anything when I searched. I'm not some typical "newbie tl;dr" person. I looked for what I could find, and posted when I couldn't find it.
But hey, thanks for being a **** - and not even posting the thread where I should be looking. Thumbs up, really appreciate that help there.
Admin: Go ahead and close this thread, I found out that I should be clicking on a blank thread to fix my issue. Fantastic. So helpful!
EDiT: And for the record, the 5.0.1 version WORKED for me for a long time... and it stopped.
Click to expand...
Click to collapse
haha you owned him...
i hate when people post with an attitude, if your not gonna help out or be a **** then why are you posting replys?
rickyiswhite said:
haha you owned him...
i hate when people post with an attitude, if your not gonna help out or be a **** then why are you posting replys?
Click to expand...
Click to collapse
No clue man. Idk, my account was registered a while ago... if I post something, it means I either:
A.) Didn't feel like reading 500 pages on a thread where 90% of it is "cool ROM"
or B.) I couldn't actually find the result.
A handy "Ok, here's the answer" would be awesome. But alas, elitist dicks still exist on XDA. Forgot alll about that.
I have noticed an over-bearing douchey attitude in quite a few threads... Kinda makes you think twice about asking for help, which is retarded. That's the purpose of these forums, unless I'm mistaken...
Sent from my Inspire 4G running BinDroid v1.2
If I help you at all... Please click "Thank You"
MERKJONES said:
No clue man. Idk, my account was registered a while ago... if I post something, it means I either:
A.) Didn't feel like reading 500 pages on a thread where 90% of it is "cool ROM"
or B.) I couldn't actually find the result.
A handy "Ok, here's the answer" would be awesome. But alas, elitist dicks still exist on XDA. Forgot alll about that.
Click to expand...
Click to collapse
Hey, don't assume! Check his post history before you definitively say anything about him - he might just be having a bad day.
Although, I am with you - XDA has two big problems - the people who actually are forget that google/XDA search exists (not saying that is you) and the people who think people asking questions must have an IQ below 50.
The first condition comes from people not using Internet comment sections (which I am all for, and never do) or forums (which are okay in moderation), and the second condition comes from people using comment sections or forums WAY too much.
Just look at Youtube comments. On the rare occasion I actually use that site and look at some of the comments, man... people are ridiculous when handed anonymity.
I apologize for moving so far off topic!
3rd edit:
Spastic909 is actually a cool person, fyi. I can recall numerous (though not specific) times just by looking at his avatar/name where he has helped me out.
"Mama always told me, if I ain't got nothing nice to say, then don't say nothing at all."
It's all good though, life goes on. I've seen it on XDA for a long time. It's fine. I'll just break my phone a couple times and figure it out myself. I don't post dickish remarks when I see stupid ****. I usually just laugh in my head and keep moving.
Was my ANSWER helpful to you?
Yes, you're right de previous 5.0 version works but not for all, so I prefer to use 3.0
sent from my HTC vision with virtuose sense 2.0's rom using xda app
zofox said:
Was my ANSWER helpful to you?
Yes, you're right de previous 5.0 version works but not for all, so I prefer to use 3.0
sent from my HTC vision with virtuose sense 2.0's rom using xda app
Click to expand...
Click to collapse
Testing it now. I was too busy cutting myself for being a lowlife and not searching every page on this entire forum for the answer :\
But now that I've half bled out, yes. You've helped me. I can't say the same for that other guy - considering he basically called me a **** for not doing specifically what you said. Whoops.
Not to start a flame war but I've seen numerous threads where it is mentioned, I had the same problem but ran into endless posts about it. Anyways not sure I saw an actual thread dedicated to it though.
Right - and you know how XDA puts "Similar posts" in the box before you post? I checked those too - and it searches everything, I saw nothing. I typed:
"Clockwork Mod 5.0.2 not working"
"Clockwork Mod Recovery 5.0.2"
All I got were threads on installing it. So... yeah, I did my thing. Anywho, going to go search a suicide thread on how to kill myself. Hopefully someone over there will guide me so I don't have to search cause I'm incredibly lazy.
MERKJONES said:
I just flashed 5.0.2 and I can no longer boot to recovery. I'm running:
ILWT CM7 b2 right now.
I can't reboot to recovery from the shutdown menu, or from ROM Manager. It worked once, and now it just sits there at the HTC screen. Any ideas? I tried to reflash it too from ROM Manager - same deal.
Click to expand...
Click to collapse
The 5.0.2.0 does have many issues and I met the same problem too.
Solve it: reflash the recovery 5.0.2.0 via ROM Manager and it may fix, at least to my DZ, it works.
Just FYI, I think this is what you - and many others - are looking for. The last 10 pages or so, specifically.
http://forum.xda-developers.com/showthread.php?t=834731
boredbutter said:
I have noticed an over-bearing douchey attitude in quite a few threads... Kinda makes you think twice about asking for help, which is retarded. That's the purpose of these forums, unless I'm mistaken...
Sent from my Inspire 4G running BinDroid v1.2
If I help you at all... Please click "Thank You"
Click to expand...
Click to collapse
Seems to be a sweeping trend on a fair few forums I use (not just XDA)
Must be some.strange form of superiority/elitism.
sent from my Nexus X
When i installed this rom it breaks my recovery, so i flash it again via rom manager and it works for me... try another time
This should bring some laughter to this thread HEHE...
This is for all the noobs who dont search LOL
http://www.youtube.com/watch?v=JmvCpR45LKA
Thanks, I found this after I tried to flash back to 5.0.1. That worked for me but wanted to look this up anyway to see why 5.0.2 didn't work.
Hey guys! I just jumped the sinking Sprint ship and made the move to AT&T. I got myself a brand new LG Nitro and immediately rooted and installed CM9. I'm used to the cm experience as I had an Epic 4G on sprint. Anyways, after installing CM9 my LED buttons won't light up. Is this a known issue? I could use some help because without the LEDs its hard to use this phone in the dark since I'm not used to the button placement yet. Thanks in advance!
I just had the same problem. Look through the setting. Turn auto-bright on
Sent from my LG-P930 using XDA
Derpp. thanks man!
Settings?
I'm still getting used to the settings of CM9 and can't seem to find the spot where that toggle is. Can you give me a menu ---> location pls?
Thanks
next time do a simple search and you will find a # of posts on this topic and none of them needed to clutter up the main forum starting a new thread about it.
learn to do your own research like 99.9% of the rest of us had to do.
trobertson said:
Hey guys! I just jumped the sinking Sprint ship and made the move to AT&T. I got myself a brand new LG Nitro and immediately rooted and installed CM9. I'm used to the cm experience as I had an Epic 4G on sprint. Anyways, after installing CM9 my LED buttons won't light up. Is this a known issue? I could use some help because without the LEDs its hard to use this phone in the dark since I'm not used to the button placement yet. Thanks in advance!
Click to expand...
Click to collapse
play with settings>display>automaticbacjklight>click use custom, and set brightness to automatic
scott0 said:
next time do a simple search and you will find a # of posts on this topic and none of them needed to clutter up the main forum starting a new thread about it.
learn to do your own research like 99.9% of the rest of us had to do.
Click to expand...
Click to collapse
I performed a search before posting and was unable to find a working fix. Next time, try posting something a little more productive and less useless trolling. Thanks.
THanks
scott0 said:
next time do a simple search and you will find a # of posts on this topic and none of them needed to clutter up the main forum starting a new thread about it.
learn to do your own research like 99.9% of the rest of us had to do.
Click to expand...
Click to collapse
I'm familiar with forums thanks. It's my Android that I'm not. In fact I did do a search and found a day old thread which I figured was the best way to get my information.
Thank you for you input
I have been trying to figure out two things with this ROM that perhaps someone can point in the right direction on:
1. WI-FI tether seems to be inconsistent, slow or not useable when tethered to my New Ipad compared to the speed I get directly to my phone. Not looking for exact same speed, just basic functionality. Is there any special settings I need to configure to make it work better?
2. Gmail - Why can't I email out to my gmail groups? I used to be able to when it was stock and even rooted...a basic function that I need multpile times daily and REALLY need a work around fast.
Thanks a ton!
You should try the CM10 thread or Q&A.
I would love to but don't know where that is at.
Thanks
shanipaqman said:
I would love to but don't know where that is at.
Thanks
Click to expand...
Click to collapse
Original android development for sprint galaxy s3.
Sent from my SPH-L710 using xda app-developers app
Posting something once in the wrong location. Okay sure no problem... but posting it TWICE one after another, in the same wrong location... come on...
And then, trying to placate your ignorance by giving some BS excuse about not knowing where it's at...? If you have the ROM and have it installed, you've obviously been around enough to know how to go about getting it which would incidentally make it equally as possible that you could find where it's at.
It's quite obvious that you posted here because you thought it was going to get "more attention."
I refuse to condone these actions, and thus I will not help you. Good luck to you, sir.
Read forum rules before posting
Questions go in Q&A
Thread moved
Hi all, i'm new here, searched for my answer high and low and can't seem to find it, hoping someone can point me in the right direction.
I'm using the Assassin 6.0 rom.
For my notifications there doesnt seem to be a clear all button, i have to manually swipe each individual one to get rid of them.
I can't post in the thread for answers as i've less than 10 posts.
Hoping someone can give me some insight to what the issue is and a possible fix. as it's a bit of a ballache to clear notifications one by one at times.
Thanks
Harmonial said:
Hi all, i'm new here, searched for my answer high and low and can't seem to find it, hoping someone can point me in the right direction.
I'm using the Assassin 6.0 rom.
For my notifications there doesnt seem to be a clear all button, i have to manually swipe each individual one to get rid of them.
I can't post in the thread for answers as i've less than 10 posts.
Hoping someone can give me some insight to what the issue is and a possible fix. as it's a bit of a ballache to clear notifications one by one at times.
Thanks
Click to expand...
Click to collapse
I had the same problem when I flashed Simplistic Framework on Android Revolution HD.
Might be a system modificaion by Assassin ROM
This is rom Specific problem.
Sent from my GT-N7100 using xda premium
encencyc chemical
Harmonial said:
Hi all, i'm new here, searched for my answer high and low and can't seem to find it, hoping someone can point me in the right direction.
I'm using the Assassin 6.0 rom.
For my notifications there doesnt seem to be a clear all button, i have to manually swipe each individual one to get rid of them.
I can't post in the thread for answers as i've less than 10 posts.
Hoping someone can give me some insight to what the issue is and a possible fix. as it's a bit of a ballache to clear notifications one by one at times.
Thanks
Click to expand...
Click to collapse
I've the same problem with wanamlite and simplistic framework, as I flashed them at the same time I can't tell if it's simplistic framework or wanamlite that making the button dissapear..
A solution would be appreciated.
aliasretro said:
I've the same problem with wanamlite and simplistic framework, as I flashed them at the same time I can't tell if it's simplistic framework or wanamlite that making the button dissapear..
A solution would be appreciated.
Click to expand...
Click to collapse
It's Simplistic Framework.
I got a feeling simplistic framework might of had something to do with it.
Thanks guys. Is there anything that can be done or is it just something simplistic framework can't have at the moment?
Harmonial said:
I got a feeling simplistic framework might of had something to do with it.
Thanks guys. Is there anything that can be done or is it just something simplistic framework can't have at the moment?
Click to expand...
Click to collapse
Play with the Simplistic Settings. Although when I was using SF, I did not find the solution for that.
Simone said:
Play with the Simplistic Settings. Although when I was using SF, I did not find the solution for that.
Click to expand...
Click to collapse
already had a nosey at them and couldnt find anything about it. might find myself removing SF as i don't use too many of its features
Harmonial said:
already had a nosey at them and couldnt find anything about it. might find myself removing SF as i don't use too many of its features
Click to expand...
Click to collapse
Good choice.
I can't use any of the three buttons. Occasionally back works but that's it. It's quite the annoyance, as I am really struggling to exit apps when I need to or to quickly change from apps via the recent button.
※ Booted the phone in safe mode - same problem.
※Wiped cache and dalvik, same problem
Updated to OB2 and still not working. Not working with stock kernel, blu-spark, or Ex kernel. I also cannot access settings from the settings cog on the dashboard. Can't find much about this anywhere else. Reflashed Stock ROM several times and to to avail. Can anybody give me any pointers?
Also can't use the stock phone properly. When incoming calls come in there's no option to answer the call, my ringtone goes off but that's all. Also when I make calls the call UI doesn't appear either. Is it looking like a restore to factory settings job?
Best
(Keep on) Raving
Next time, please post this in the correct subforum.
As for your issue. I would strongly recommend making a backup of your important files such as photos and then doing a clean flash of your rom
Zombie said:
Next time, please post this in the correct subforum.
As for your issue. I would strongly recommend making a backup of your important files such as photos and then doing a clean flash of your rom
Click to expand...
Click to collapse
And the correct subforum would be? I posted a similar thread in general questions and answers and got quite a poor response. But sorry about that, still learning the ropes around here.
nightraving said:
And the correct subforum would be? I posted a similar thread in general questions and answers and got quite a poor response. But sorry about that, still learning the ropes around here.
Click to expand...
Click to collapse
All questions, requests and troubleshooting issues belong in the Help/Q&A section. You're thread has been moved there.