Related
Hi, i have a Lg Nitro HD p930 AT&T with ICS.
I only have the phone for a few days i bought it used on mint condition on ebay.
The problem is that my phone turn off itself and the only way i can turn it on is taking off the battery and then put it back again, also i notice that the battery discharge really fast when i do that, for example if that happens with 90% of the battery when i do the process to turn the phone on, the battery is in 73%.
Another thing is that my phone sometimes gets extremely hot.
Obviously im not an expert but i think maybe its the battery because i only get 4-6 hours with simple use, just chat a little in whatsapp and view a few post on facebook.
I hope you can help me, thanks in advance.
Random reset is an issue on official ics
U can hold power button for 10sec or takeout the battery.
This phone battery usage is high and I think its because of the ips screen.
If you wanna check your battery ,turn off wifi and data and leave your phone for about 5 hours and check battery percentage it should not be more than 5%.but it depend on signal strength of your 3G/4G network
when I play high graphic games or browsing web for long time with high brightness phone gets hot in up sides and its normal
If your phone gets very hot it might be a problem
Sent from my LG-P930 using Tapatalk 2
Yeah, common issue with this phone and ICS and there is no easy fix. You will also sometimes see a red halo on the screen if it turns off by itself and gets hot.
Try to root it and install HoNo's Full Throttle. I heard it doesn't have that issue.
Afriend told me something similar happen to him a he download from de market the App Wake Lock, i download it and the phone hasnt reset since i install it but steal get hot when i use the GPS or chat in multiples APPs and the battery sucks even instaling juice defender.
i just finish rooting my phone a few minutes ago, i would like to instal cyanogen 10, im going to research how to cuz im new i never had install a ROM BUY maybe it work better
can someone send me the link or a tutorial of how to intall a ROM i had my NITRO rooted but i never install a ROM.
wich ROM YOU RECOMMEND i would like a rom that as stable as an official version and dont get my phone hot
thanks
Did you try doing a factory reset? (Hold volume down + power when turning the phone on)
i brick my phone
now i brick my phone, can it be unbricked having lg official icecream sandwich? please and really scared!!!
radhames562 said:
now i brick my phone, can it be unbricked having lg official icecream sandwich? please and really scared!!!
Click to expand...
Click to collapse
Yes, you can unbrick if you're using official ICS; in fact, that's the only way you'd be able to install a custom ROM in the 1st place coming from official ICS. If you just want stock ICS you can use the LG Mobile Update software to restore your device to the stock LG firmware; but if you want a custom ROM you will need to follow one of the 3 unbrick guides located here in the general forum.
radhames562 said:
now i brick my phone, can it be unbricked having lg official icecream sandwich? please and really scared!!!
Click to expand...
Click to collapse
There is no conceivable way to brick an unmodified phone by doing a factory reset, but given the other symptoms that you are describing it might suggest that your phone has a hardware problem. Did you get a warranty with it? It has been my experience that people that have stability issues with this phone and it is 100% stock ICS points to one of two possibilities: software, that a factory reset would resolve or hardware. Good luck.
Sent from my LG-P930 using xda app-developers app
You did root your phone on stock ics but bootloader is locked , so you can't flash any rom via cwm and your phone is bricked.
The only way to unlock bootloader is following unbrick method instructions and back to android 2.3 which has unlocked boot loader and then install rom manager and cwm, then you can flash your favarite rom
If you wana flash stock ics ,use HoNo at&t official ics cmw flashable nor flash what ever you like
Sent from my LG-P930 using Tapatalk 2
thanks
nss007 said:
You did root your phone on stock ics but bootloader is locked , so you can't flash any rom via cwm and your phone is bricked.
The only way to unlock bootloader is following unbrick method instructions and back to android 2.3 which has unlocked boot loader and then install rom manager and cwm, then you can flash your favarite rom
If you wana flash stock ics ,use HoNo at&t official ics cmw flashable nor flash what ever you like
Sent from my LG-P930 using Tapatalk 2
Click to expand...
Click to collapse
hey man thanks you were rigth now im using cyanogen 10 and its great, the phone doesnt get too hot anymore.
now i would love if you help me install GOOGLE PLAY JEJEJE PLIZZZ i dont know how
You should download gapps
But be careful download gapps 4.1.2 for cyanogen 10
Then flash the zip file of gapps like a rom
http://wiki.rootzwiki.com/Google_Apps
Sent from my LG-P930 using Tapatalk 2
nss007 said:
you should download gapps
but be careful download gapps 4.1.2 for cyanogen 10
then flash the zip file of gapps like a rom
http://wiki.rootzwiki.com/google_apps
sent from my lg-p930 using tapatalk 2
Click to expand...
Click to collapse
thanks bro youre the best i install it from the rom manager
radhames562 said:
thanks bro youre the best i install it from the rom manager
Click to expand...
Click to collapse
To solve the problem with reboots, are you still using WakeLock on CM10? And if yes, what mode in WakeLock you are using now?
johnsnow911 said:
To solve the problem with reboots, are you still using WakeLock on CM10? And if yes, what mode in WakeLock you are using now?
Click to expand...
Click to collapse
well the problem was solve but a few day ago my phone just reboots i download the wake lock and its no happening again i used in atage 4
radhames562 said:
well the problem was solve but a few day ago my phone just reboots i download the wake lock and its no happening again i used in atage 4
Click to expand...
Click to collapse
At stage 4 phone doesn't sleep. I've checked out it last night...
johnsnow911 said:
At stage 4 phone doesn't sleep. I've checked out it last night...
Click to expand...
Click to collapse
yeah thats rigth the phone never sleep, im instaling the Ho!no! full trotle to see what happens
radhames562 said:
yeah thats rigth the phone never sleep, im instaling the Ho!no! full trotle to see what happens
Click to expand...
Click to collapse
try to set permission for system/bin folder and file bin/vold to
xxx
xxx
x0x
xxx
My Phone stoped rebooting
it happens again even with wake lock i start installing a lots of ROMs and it happens again then i install ligthing zap and it stop but another day when i try to instal another ROM i cant set the phone always reboot
I make some research and i found LIQUID ROM thats is a ATT&T MODIFIED ICS and so far the phone hasnt reboot or do anything worng and thats all i want, i even get better battery life i hope the phone never reboot himself again.
radhames562 said:
it happens again even with wake lock i start installing a lots of ROMs and it happens again then i install ligthing zap and it stop but another day when i try to instal another ROM i cant set the phone always reboot
I make some research and i found LIQUID ROM thats is a ATT&T MODIFIED ICS and so far the phone hasnt reboot or do anything worng and thats all i want, i even get better battery life i hope the phone never reboot himself again.
Click to expand...
Click to collapse
To increase battery life just install v10e rom backup from here http://forum.xda-developers.com/showthread.php?t=1827379 and try to set permission, like i said above and look, what you will get. My phone keep on for 1day and 19 with some internet and games. Its 1% battery for about 2 hours, but it still working) no reboot and no problems without wake lock))) Its sleep like a calm baby almost all night long)
Hello everyone,
As the title says I have a problem with my Galaxy Note II N7105 Lte (Vodafone, Germany)
I flashed the new cyanogenmod nightly one the phone and that was all well and good but then I made the mistake of flashing the Note2Core Kernel on top of if rendering my phone dead. My first Idea was to flash another Kernel on top, as I had some issues with the newest Note2Core Kernel (v3.06 OC) when I was still on my stock rom. I used the Perseus Kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1927852 (I used the correct one for the N7105, so I think that is not the problem.)
What I then did was search the internet for an answer and most of the time I found something like "go enter cwm" but that just wont work and I have no idea why. I can only get into the normal "Download" mode. I tried pushing the 3 buttons from the start and just holding them, waiting for the first samsung logo with the device name and then pressing them and also pressing them and then letting go of the power button as one tutorial suggested. At the end it means I can't go into cwm, which would have been the easy way out.
What I did then was trying to flash the stock rom (from samsung-updates.com) on top of it with odin to get rid of the whole mess but that got me nowhere too. When I start up the phone the samsung logo is back but it is stuck... I left it like that for about an hour just to see if it would work eventually but I am stuck at the logo.
Trying to find out what is going on I entered the "Download" mode again and that confused me a bit there as it says binary SAMSUNG official BUT System custom. Just to see what would happen I flashed the auto root on top of it but that just gave my the notice that my binary was also custom so I went and flashed the official samsung rom on top again to no effect.
I spend the whole night yesterday to find a solution but this is all I got. I assume that cyanogenmod 10 is just not working with another kernel and found that out the hard way.
I would really appreciate help on this matter as I am out of options right now.
Boot in recovery now tgat you flashed stock rom. To boot in recovery press
Volume up+home button+on/off.
When samsung logo appears release the power button.
When it will boot in stock android recovery select wipe cache and wipe whole system (can't recall how it is written). Then select reboot now. That should do it.
Sent from my GT-N7100 using xda premium
mariosraptor said:
Volume up+home button+on/off.
Click to expand...
Click to collapse
That did not quite do it but I feel like a fool right now since this is the first time I realised that I mixed up Volume up and Volume down. But you gave me an option for that factory reset and after flashing CWM on top of that with ODIN it works again. One night wasted on nothing but my own lack of sleep and stupidity.
Thanks!
Good that it is working
Sent from my GT-N7100 using xda premium
I don't think Perseus supports CM10 at this time.
Sent from my GT-N7100 using xda app-developers app
SenK9 said:
I don't think Perseus supports CM10 at this time.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
AFAIK:
Perseus: Samsung based ROMs.
RedPill: Samsung and AOSP.
N.E.A.K. Note2: Samsung and AOPS (AOPS support is only available for the N7100).
Note2Core: Samsung.
Anyway, glad it ended well for you OP!
Androssama said:
AFAIK:
Perseus: Samsung based ROMs.
RedPill: Samsung and AOSP.
N.E.A.K. Note2: Samsung and AOPS (AOPS support is only available for the N7100).
Note2Core: Samsung.
Click to expand...
Click to collapse
Thanks! I haven't experimented much with custom kernels and my first try in combination with CM 10 didn't end that well. This gives me something to go from. Also I had a HTC Desire before and just got the Note 2 a few weeks ago, so there is another thing I have to get to know better.
Dude, please note that, for those kernels above which support both Touchwiz/Samsung and AOSP/Cyanogenmod based ROMS, there will be a separate version of the kernel for each.
hdr32 said:
Hello everyone,
As the title says I have a problem with my Galaxy Note II N7105 Lte (Vodafone, Germany)
I flashed the new cyanogenmod nightly one the phone and that was all well and good but then I made the mistake of flashing the Note2Core Kernel on top of if rendering my phone dead. My first Idea was to flash another Kernel on top, as I had some issues with the newest Note2Core Kernel (v3.06 OC) when I was still on my stock rom. I used the Perseus Kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1927852 (I used the correct one for the N7105, so I think that is not the problem.)
What I then did was search the internet for an answer and most of the time I found something like "go enter cwm" but that just wont work and I have no idea why. I can only get into the normal "Download" mode. I tried pushing the 3 buttons from the start and just holding them, waiting for the first samsung logo with the device name and then pressing them and also pressing them and then letting go of the power button as one tutorial suggested. At the end it means I can't go into cwm, which would have been the easy way out.
What I did then was trying to flash the stock rom (from samsung-updates.com) on top of it with odin to get rid of the whole mess but that got me nowhere too. When I start up the phone the samsung logo is back but it is stuck... I left it like that for about an hour just to see if it would work eventually but I am stuck at the logo.
Trying to find out what is going on I entered the "Download" mode again and that confused me a bit there as it says binary SAMSUNG official BUT System custom. Just to see what would happen I flashed the auto root on top of it but that just gave my the notice that my binary was also custom so I went and flashed the official samsung rom on top again to no effect.
I spend the whole night yesterday to find a solution but this is all I got. I assume that cyanogenmod 10 is just not working with another kernel and found that out the hard way.
I would really appreciate help on this matter as I am out of options right now.
Click to expand...
Click to collapse
As long as you can enter DOWNLOAD mode, your phone is NOT bricked. When you **** up your bootloader and stuff, then we can talk...
Hopefully this has taught you how important it is ti actually read up on something before you do it. Not only are the note2core and perseus kernels for samsung based roms only, other kernels such as redpill and neak only support the n7100 for their aosp/cm kernels.
As far as I know there is currently no other cm kernel for the n7105, although there is a neak cm kernel for the n7105 currently in beta testing.
Sent from my GT-N7100 using xda premium
No worries... learned my lesson... Sometimes I just need that smack in the face to get it.
And before I break my bootloader or some similar disaster occurs... I'll read first.
Sent from my GT-N7105 using xda app-developers app
Think we need a sticky with good instructions how to install and make a nandroid backup.
As well as sticky for EFS backup and why its so important to do it first and properly.
I know I had a lot of problems finding this info and implementing it proper,
Hi All,
Apologies if this is the wrong place to ask these questions. Please let me know if I should move the thread.
Backstory: I bought an unlocked S3 off of craigslist last weekend. I bought a SIM card adapter so my nano-sim from my iPhone 5 will work in the S3. I really love the phone, minus a few issues. I can't get LTE to work, and the battery seems to be pretty bad as it's constantly searching and dropping my 3g cell signal.
It's running Android 4.2.2 via Cyanogenmod. All I know is that this is not the standard Touchwiz OS that ships with the S3 from samsung, and is a variant of the standard 4.2.2 OS from Google.
Questions:
1. Is my lack of LTE due to the OS? Someone recommended to me that I should put the phone back to the stock Touchwiz OS (via Mobile Odin), which would enable the LTE. Think that's the case? Or is this an issue with my Nano SIM and AT&T account?
2. Using this Cyanogen 4.2.2, I don't get any onscreen notifications when I get a text, email or calendar alert. My friends with stock S3's and Notes all get these types of notifications. Am I missing something with Cyanogen 4.2.2 or should I try to go back to Touchwiz?
3. If I were to go back to touchwiz, I was told I could just download it onto my S3 sim card and install/load it via Mobile Odin. Is this the case? This is my first time working with Android phones, so it's all greek to me for now. If I switch to stock Touchwiz, will I lose all of my aps and configurations and have to re-set it up? What other cool things would I be losing?
I really do love this phone and would love to stick with it over my iPhone 5. The lack of LTE, good battery life (probably can be improved with tweaks) and onscreen notifications are making it tough for me to make this my daily driver.
Any and all help is greatly appreciated!!
what is the model number of your device? i747, i9300, etc.
without getting too technical at the moment, you're running a nightly release (not always stable) of an operating system. it was probably flashed on your device half-a** and you are experiencing bugs because of these 2 things. the thing about buying a used phone that is rooted running a custom rom is, you dont have a clue about its history. how things were run/setup/installed, etc. not a deal breaker, as i bought mine used, just have to consider starting over with it from square A in order to get and keep it running properly.
before you start changing/flashing anything, i would browse the forum and begin reading up. the more you know, the smoother and safer everything will go for you
xBeerdroiDx said:
what is the model number of your device? i747, i9300, etc.
without getting too technical at the moment, you're running a nightly release (not always stable) of an operating system. it was probably flashed on your device half-a** and you are experiencing bugs because of these 2 things.
before you start changing/flashing anything, i would browse the forum and begin reading up. the more you know, the smoother and safer everything will go for you
Click to expand...
Click to collapse
Model # is SGH-i747.
CyanogenMod version: 10.1-20130304-NIGHTLY-d2ATT
Build date: 3/4 2013
So the build is slightly out of date. Any recommendations on what I should do? Download the latest version? Buy MobilOdin and re-install touchwiz?
Thanks!
diggity said:
Model # is SGH-i747.
CyanogenMod version: 10.1-20130304-NIGHTLY-d2ATT
Build date: 3/4 2013
So the build is slightly out of date. Any recommendations on what I should do? Download the latest version? Buy MobilOdin and re-install touchwiz?
Thanks!
Click to expand...
Click to collapse
in my opinion, i would start over. thats just me, though. you might not want to download and setup everything again, though. if you do opt to reset, decide if you want to continue using a custom ROM or stock Samsung Touchwiz. in either case, you wont need to purchase anything. do you have a PC?
xBeerdroiDx said:
in my opinion, i would start over. thats just me, though. you might not want to download and setup everything again, though. if you do opt to reset, decide if you want to continue using a custom ROM or stock Samsung Touchwiz. in either case, you wont need to purchase anything. do you have a PC?
Click to expand...
Click to collapse
Nope I have a Mac, although I do have access to a PC at work if needbe though. When you mean start over, what do you mean? Sorry, gotta talk to me like I'm a 5yr old here for a bit. I'm not too versed or experienced with Android and development. I've been in the iOS world since 07.
diggity said:
Nope I have a Mac, although I do have access to a PC at work if needbe though. When you mean start over, what do you mean? Sorry, gotta talk to me like I'm a 5yr old here for a bit. I'm not too versed or experienced with Android and development. I've been in the iOS world since 07.
Click to expand...
Click to collapse
by start over i mean wipe the phone and install an OS. but only once you're sure of what you're doing.
xBeerdroiDx said:
by start over i mean wipe the phone and install an OS. but only once you're sure of what you're doing.
Click to expand...
Click to collapse
Would that remove the unlock?
How do I do that? What do install instead? Touchwiz or newest Cyanogenmod? If so, where do I get the latest/greatest of either?
Thanks!!
diggity said:
Would that remove the unlock?
How do I do that? What do install instead? Touchwiz or newest Cyanogenmod? If so, where do I get the latest/greatest of either?
Thanks!!
Click to expand...
Click to collapse
is this an at&t S3 on tmobile?
you shouldn't lose sim lock when you flash ROMs/firmware. did you get the unlock code from the seller, in the event you ever do have an issue where you need it?
xBeerdroiDx said:
is this an at&t S3 on tmobile?
you shouldn't lose sim lock when you flash ROMs/firmware. did you get the unlock code from the seller, in the event you ever do have an issue where you need it?
Click to expand...
Click to collapse
It's an AT&T S3 on AT&T (using my iphone 5 nanosim). I guess I didnt need to buy it unlocked, but that's what I got off of craigslist. I did not get the unlock code from the seller, but I could probably still get that from them easily.
diggity said:
It's an AT&T S3 on AT&T (using my iphone 5 nanosim). I guess I didnt need to buy it unlocked, but that's what I got off of craigslist. I did not get the unlock code from the seller, but I could probably still get that from them easily.
Click to expand...
Click to collapse
Read the thread in the development section about how to root without flashing trip counter. It tells you where to download Odin, what file to download and flash, and how to do it. Can get you back on a stock touchwiz ROM (+ root) in no time!
Sent from my SAMSUNG-SGH-I747
phositadc said:
Read the thread in the development section about how to root without flashing trip counter. It tells you where to download Odin, what file to download and flash, and how to do it. Can get you back on a stock touchwiz ROM (+ root) in no time!
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Great thanks! I'll give it a shot! You think getting back to stock touchwiz will fix my LTE, battery and notificaiton issues?
Thank you for all your help!
diggity said:
Great thanks! I'll give it a shot! You think getting back to stock touchwiz will fix my LTE, battery and notificaiton issues?
Thank you for all your help!
Click to expand...
Click to collapse
i think that returning to stock is the best way to get started on fixing these issues, whether you decide to stay on it or continue on to flashing something else.
here's the link to the stock firmware download: http://www.androidfilehost.com/?fid=9390212717148635192
here's the link to Odin: http://www.androidfilehost.com/?fid=9390275921635705049
here's a video i would recommend watching first: http://youtu.be/hqDW--uUX_8
Part 1: Backup and Wipe
Boot into recovery (vol up + home + power. release power button when device vibrates)
Go to backup and restore (use Volume Up / Down buttons in CWM).
Select Backup (power button in CWM).
After backup, go back to main screen and select Wipe data/factory reset
Select Wipe Cache
Select Advanced and Wipe Dalvik Cache
Part 2: Install stock firmware and Wipe
Extract the root66_xxx_.tar.md5 from the .7z file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the root66_xxx_.tar.md5 you downloaded.
Leave F. Reset Time checked.
click start
When you get a PASS, unplug the phone and pull the battery. wait a second, replace and immediately go into recovery (vol up + home + power. release the power button at vibrate)
Select wipe data and wipe cache again.
Reboot and you're good to go
diggity said:
Great thanks! I'll give it a shot! You think getting back to stock touchwiz will fix my LTE, battery and notificaiton issues?
Thank you for all your help!
Click to expand...
Click to collapse
I agree with the above poster, returning to stock using the described method should fix your problems then you can decide if you want to stay stock or flash another ROM.
I think you should stay stock for at least a few days to get a general sense of how things should work, that way when you flash custom ROMs you will have a better idea what is broken and what is just typical android behavior.
Sent from my SAMSUNG-SGH-I747
phositadc said:
I think you should stay stock for at least a few days to get a general sense of how things should work, that way when you flash custom ROMs you will have a better idea what is broken and what is just typical android behavior.
Click to expand...
Click to collapse
agreed. as a matter of fact, stay stock for a week. the first 48 hours will really be just letting the software settle in. dont judge battery performance based off those first 2 or 3 days. let it get up and running.
Check your APN see if they are correct
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hey let me ask you a stoopid question do you have some kinda case that has metal on the back on that phone,i ordered one of those battery covers that was like a metallic silver thats around the edges of the phone the white one anyway,and for the life of me i couldnt figure out why i wasnt gettin gps it was that cover,some of the cases that have metal on them or the battery back replacements that i had stay away form,but anyway pull your cover off and see if you lock u can also tighten up the screw under the cover
Hi,
I have a galaxy note 2014 edition that has retail mode on, it was a demo ex. Is there anyway to remove this from the device? Maybe through factory reset with stock firmware or something? Have no idea how to do a factory reset with stock firmware if that works.
ClowneN86 said:
Hi,
I have a galaxy note 2014 edition that has retail mode on, it was a demo ex. Is there anyway to remove this from the device? Maybe through factory reset with stock firmware or something? Have no idea how to do a factory reset with stock firmware if that works.
Click to expand...
Click to collapse
Hi,
To do a factory reset: Switch off the tablet.
Then power it up by pressing simultaneously and holding : Volume up + Home + Power
When in Recovery mode move the cursor with the volume key and execute with the power key.
Select Factory reset and execute it.
Tilagoon said:
Hi,
To do a factory reset: Switch off the tablet.
Then power it up by pressing simultaneously and holding : Volume up + Home + Power
When in Recovery mode move the cursor with the volume key and execute with the power key.
Select Factory reset and execute it.
Click to expand...
Click to collapse
Factory reset doesnt seem to help for some reason. Its like its in the rom. Were can I find the stock rom and how do I put it in?
ClowneN86 said:
Factory reset doesnt seem to help for some reason. Its like its in the rom. Were can I find the stock rom and how do I put it in?
Click to expand...
Click to collapse
Have a look HERE it's for the S5 but it should something similar for the Note 2014.
Tilagoon said:
Have a look Here it's for the S5 but it should something similar for the Note 2014.
Click to expand...
Click to collapse
Ive done every step of that guide except flash with a stock rom since I dont know were to get it or how to flash the devicce.
ClowneN86 said:
Ive done every step of that guide except flash with a stock rom since I dont know were to get it or how to flash the devicce.
Click to expand...
Click to collapse
Hi,
OK, the first thing to know is which device you have: Sm-P600/601/605 ??
Then to know which ROM is installed on the tablet ?
If you can go to setting : then scroll down to "About the phone" you should see the version of the ROM.
With that you go to sammobile
You put your device type and you will get all the stock ROM's
You click on the one you want and on the next windows you will have the URL to download and the way to install it.
To be able to download the ROM you have to register on this site but it's free of charge !!
Tilagoon said:
Hi,
OK, the first thing to know is which device you have: Sm-P600/601/605 ??
Then to know which ROM is installed on the tablet ?
If you can go to setting : then scroll down to "About the phone" you should see the version of the ROM.
With that you go to
You put your device type and you will get all the stock ROM's
You click on the one you want and on the next windows you will have the URL to download and the way to install it.
To be able to download the ROM you have to register on this site but it's free of charge !!
Click to expand...
Click to collapse
Its a SM-P600,
Kernel Version: 3.4.39-1691324
Build Number: JSS15J.P600XXXUAMI8_LLK
I tried that site but canceled it cause it said it will take 15h to download the firmware.
You can try from HERE
But I am not sure it will be any faster.
Those ROM's are quite big > 1.xx Gb so if your internet connection is slow it's take time.
Tilagoon said:
You can try from HERE
But I am not sure it will be any faster.
Those ROM's are quite big > 1.xx Gb so if your internet connection is slow it's take time.
Click to expand...
Click to collapse
It seems to go a little bit faster today from sammobile. I have a 100/100 connection so it should go fast
Thanks for taking the time to help.
Tilagoon said:
You can try from
But I am not sure it will be any faster.
Those ROM's are quite big > 1.xx Gb so if your internet connection is slow it's take time.
Click to expand...
Click to collapse
Stock firmware solved everything so a big thanks to you!
ClowneN86 said:
Stock firmware solved everything so a big thanks to you!
Click to expand...
Click to collapse
Great :good: Good news , very happy you could make it work !! :good:
Tilagoon said:
Great :good: Good news , very happy you could make it work !! :good:
Click to expand...
Click to collapse
One more question, I can´t seem to set some kind of password for the lockscreen since the lock screen option is gone in some way. It says something about Knox but what is that?
Can i add some other app that handles the lock screen?
About Knox: it's some kind of security introduced by Samsung some months ago, a real pain in the back..
Have a look HERE (for example) for more details.
Yes you can install applications w/o problem.
Knox will only get involved when you start playing with the ROM's, Bootloader etc ..
Hi
Hello guys, I have an Galaxy S6 Edge Demo version, I want to know if I change the motherboard with another with GSM function, it will work fine ?
The digital finger print doesn't work, I have to change the button or how can I fix this ?
And another thing, in the background of display, you can barely notice a text, this : Samsung Galaxy S6 Edge, this thing is from display or motherboard ? Because I want to know, if I change the motherboard, it will dissapear that text ?
Thank you.
I would like to remove the starting screen ''Live demo unit'' on SM-T800X tablet to the stock one, and after flashing I have got the demo pieces of text in the bottom of the screen.
I tried to re-partition the install with ODIN and used a PIT file but no changes. Anybody can help with this problem please ? Is there any solution to change the demo unit to look as a stock SM-T800 ?
Also if there any solution to change KNOX value to 0 would be great.
Hi guys,
I have P601 with phone call feature activated and Tab S Beta rom loaded.Kernel is "Xluco P601 - V4-b3". I have this annoying issue;
It is closing itself randomly!! First it was happening while i was using a Poetic Slimline Smart Cover and i thought that magnetic feature causes that. When i had done using tablet and close the cover, after 3-4 hours it was closing itself. And also this is not a normal close !! But then, it start to happen without using magnetic cover !! It was on its 2nd day and battery around %60-70, when i take it in the morning, it was closed again.This time not after 3-4 hours but around 1 day no usage time.This thing was happening with the others roms too (hyronium, custom etc.) and i always do wipe data, dalvik... and clean rom install.
I also observed these;
1- When "this closing" happens, it needs 12-13 seconds to hold power button for opening. (Device always open 5 secs with holding power button , when i turn off it myself normally)
2- When i put charger cable, not indication appears for charging on the screen (big green battery icon with %.. how much juice left).All powerless black screen only.I mean in this weird close mode, even it does not charge.
This situation, i can describe is like a deep sleep or deep close mode .It is a weird and annoying.I think an app may cause this problem but i don't know which one or is it an app actually ?
Can anyone help, who has the same problem or knows about this situation please? Thanks
no one has no idea ??
KpttpK said:
no one has no idea ??
Click to expand...
Click to collapse
You should try to take xulcos kernal off and put stock back on and see if it does the same thing.Alot of people including me have been having that problem of tablet freezing up and having to hold the power button down to make come back on.The only thing we all have in common is that kernal.When i put stock kernal back on the problem goes away.
mikep2323 said:
You should try to take xulcos kernal off and put stock back on and see if it does the same thing.Alot of people including me have been having that problem of tablet freezing up and having to hold the power button down to make come back on.The only thing we all have in common is that kernal.When i put stock kernal back on the problem goes away.
Click to expand...
Click to collapse
Thanks, i will try this kernel change but, xluco kernel has support of ntfs and many more than stock.So it feels bad to bo back :/ Besides custom kernel, could you suggest another kernel for P601 model and also if possible give me a link of it.
Btw i couldn't find custom kernel link to download, it is broken or something about my internet.So if possible a link for custom kernel for P601 too ? I want to try ntfs supported, otg, and other improved settings, different kernel, then i will return to custom kernel.
KpttpK said:
Thanks, i will try this kernel change but, xluco kernel has support of ntfs and many more than stock.So it feels bad to bo back :/ Besides custom kernel, could you suggest another kernel for P601 model and also if possible give me a link of it.
Btw i couldn't find custom kernel link to download, it is broken or something about my internet.So if possible a link for custom kernel for P601 too ? I want to try ntfs supported, otg, and other improved settings, different kernel, then i will return to custom kernel.
Click to expand...
Click to collapse
His kernal is only custom one for our tablets, I have p600 but from all the times I put his kernal on I have same problem. As soon as I go back to stock the problem goes away. There are many others that have the same problem as well.
I see.Then i will return to stock kernel So can you post a link for P601 Stock Kernel please.Because i couldn't find it here.
KpttpK said:
I see.Then i will return to stock kernel So can you post a link for P601 Stock Kernel please.Because i couldn't find it here.
Click to expand...
Click to collapse
I dont have that tablet I have p600 but you can pull the stock kernal from your rom. I use a app called flashify to flash the kernal out my rom. Im heading out but later I show you exact steps to do. Its very easy.